LKML Archive on lore.kernel.org help / color / mirror / Atom feed
From: Liming Sun <lsun@mellanox.com> To: Ulf Hansson <ulf.hansson@linaro.org>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Jaehoon Chung <jh80.chung@samsung.com>, Catalin Marinas <catalin.marinas@arm.com>, Will Deacon <will.deacon@arm.com> Cc: Liming Sun <lsun@mellanox.com>, linux-mmc@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, stable@kernel.org Subject: [PATCH v5 1/3] mmc: dw_mmc-bluefield: Add driver extension Date: Tue, 1 May 2018 14:19:45 -0400 [thread overview] Message-ID: <1525198787-46403-1-git-send-email-lsun@mellanox.com> (raw) In-Reply-To: <026fa942828c54fda5bad225981e56abc808b949.1524497286.git.lsun@mellanox.com> This commit adds extension to the dw_mmc driver for Mellanox BlueField SoC. It updates the UHS_REG_EXT register to bring up the eMMC card on this SoC. Cc: stable@kernel.org Signed-off-by: Liming Sun <lsun@mellanox.com> Reviewed-by: David Woods <dwoods@mellanox.com> --- drivers/mmc/host/Kconfig | 9 +++++ drivers/mmc/host/Makefile | 1 + drivers/mmc/host/dw_mmc-bluefield.c | 72 +++++++++++++++++++++++++++++++++++++ 3 files changed, 82 insertions(+) create mode 100644 drivers/mmc/host/dw_mmc-bluefield.c diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 9589f9c..26ac6b5 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -717,6 +717,15 @@ config MMC_DW_K3 Synopsys DesignWare Memory Card Interface driver. Select this option for platforms based on Hisilicon K3 SoC's. +config MMC_DW_BLUEFIELD + tristate "BlueField specific extensions for Synopsys DW Memory Card Interface" + depends on MMC_DW + select MMC_DW_PLTFM + help + This selects support for Mellanox BlueField SoC specific extensions to + the Synopsys DesignWare Memory Card Interface driver. Select this + option for platforms based on Mellanox BlueField SoC's. + config MMC_DW_PCI tristate "Synopsys Designware MCI support on PCI bus" depends on MMC_DW && PCI diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 6aead24..267b3f1 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -55,6 +55,7 @@ obj-$(CONFIG_MMC_DW_K3) += dw_mmc-k3.o obj-$(CONFIG_MMC_DW_PCI) += dw_mmc-pci.o obj-$(CONFIG_MMC_DW_ROCKCHIP) += dw_mmc-rockchip.o obj-$(CONFIG_MMC_DW_ZX) += dw_mmc-zx.o +obj-$(CONFIG_MMC_DW_BLUEFIELD) += dw_mmc-bluefield.o obj-$(CONFIG_MMC_SH_MMCIF) += sh_mmcif.o obj-$(CONFIG_MMC_JZ4740) += jz4740_mmc.o obj-$(CONFIG_MMC_VUB300) += vub300.o diff --git a/drivers/mmc/host/dw_mmc-bluefield.c b/drivers/mmc/host/dw_mmc-bluefield.c new file mode 100644 index 0000000..12067b1 --- /dev/null +++ b/drivers/mmc/host/dw_mmc-bluefield.c @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 Mellanox Technologies. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/mmc/host.h> +#include <linux/mmc/mmc.h> +#include <linux/of.h> + +#include "dw_mmc.h" +#include "dw_mmc-pltfm.h" + +static void dw_mci_bluefield_set_ios(struct dw_mci *host, struct mmc_ios *ios) +{ + u32 regs; + + /* Set drive=4 (bit 29:23) and sample=2 (bit 22:16) in UHS_REG_EXT. */ + regs = mci_readl(host, UHS_REG_EXT); + regs = (regs & ~0x3F100000 & ~0x7F0000) | (4 << 23) | (2 << 16); + mci_writel(host, UHS_REG_EXT, regs); +} + +static const struct dw_mci_drv_data bluefield_drv_data = { + .set_ios = dw_mci_bluefield_set_ios +}; + +static const struct of_device_id dw_mci_bluefield_match[] = { + { .compatible = "mellanox,bluefield-dw-mshc", + .data = &bluefield_drv_data }, + {}, +}; +MODULE_DEVICE_TABLE(of, dw_mci_bluefield_match); + +static int dw_mci_bluefield_probe(struct platform_device *pdev) +{ + const struct dw_mci_drv_data *drv_data = NULL; + const struct of_device_id *match; + + if (pdev->dev.of_node) { + match = of_match_node(dw_mci_bluefield_match, + pdev->dev.of_node); + drv_data = match->data; + } + + return dw_mci_pltfm_register(pdev, drv_data); +} + +static struct platform_driver dw_mci_bluefield_pltfm_driver = { + .probe = dw_mci_bluefield_probe, + .remove = dw_mci_pltfm_remove, + .driver = { + .name = "dwmmc_bluefield", + .of_match_table = dw_mci_bluefield_match, + .pm = &dw_mci_pltfm_pmops, + }, +}; + +module_platform_driver(dw_mci_bluefield_pltfm_driver); + +MODULE_DESCRIPTION("BlueField DW Multimedia Card driver"); +MODULE_AUTHOR("Mellanox Technologies"); +MODULE_LICENSE("GPL v2"); -- 1.8.3.1
next prev parent reply other threads:[~2018-05-01 18:29 UTC|newest] Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-04-23 15:32 [PATCH v2 1/3] mmc: dw_mmc-bluefield: Add driver extension Liming Sun 2018-04-23 15:32 ` [PATCH v2 2/3] Documentation: bluefield-dw-mshc: add DT description Liming Sun 2018-04-27 19:50 ` Rob Herring 2018-04-30 14:57 ` Liming Sun 2018-04-23 15:32 ` [PATCH v2 3/3] arm64: defconfig: Enable dw_mmc-bluefield driver Liming Sun 2018-04-24 1:11 ` [PATCH v2 1/3] mmc: dw_mmc-bluefield: Add driver extension Shawn Lin 2018-05-08 13:06 ` Liming Sun 2018-05-08 18:55 ` Liming Sun 2018-04-30 14:51 ` [PATCH v3 " Liming Sun 2018-04-30 14:51 ` [PATCH v3 2/3] dt-bindings: mmc: Add binding for BlueField SoC Liming Sun 2018-05-01 12:48 ` Rob Herring 2018-05-01 14:36 ` Liming Sun 2018-04-30 14:51 ` [PATCH v3 3/3] arm64: defconfig: Enable dw_mmc-bluefield driver Liming Sun 2018-05-01 14:32 ` [PATCH v4 1/3] mmc: dw_mmc-bluefield: Add driver extension Liming Sun 2018-05-01 14:32 ` [PATCH v4 2/3] dt-bindings: mmc: Add binding for BlueField SoC Liming Sun 2018-05-01 16:24 ` Rob Herring 2018-05-01 19:10 ` Liming Sun 2018-05-01 14:32 ` [PATCH v4 3/3] arm64: defconfig: Enable dw_mmc-bluefield driver Liming Sun 2018-05-01 18:19 ` Liming Sun [this message] 2018-05-02 1:02 ` [PATCH v5 1/3] mmc: dw_mmc-bluefield: Add driver extension Shawn Lin 2018-05-02 12:45 ` Liming Sun 2018-05-03 7:25 ` Shawn Lin 2018-05-03 14:35 ` Liming Sun 2018-05-02 8:16 ` Jaehoon Chung 2018-05-03 15:52 ` Liming Sun 2018-05-01 18:19 ` [PATCH v5 2/3] dt-bindings: mmc: Add binding for BlueField SoC Liming Sun 2018-05-01 18:19 ` [PATCH v5 3/3] arm64: defconfig: Enable dw_mmc-bluefield driver Liming Sun 2018-05-03 15:45 ` [PATCH v6 1/3] mmc: dw_mmc-bluefield: Add driver extension Liming Sun 2018-05-03 15:45 ` [PATCH v6 2/3] dt-bindings: mmc: Add binding for BlueField SoC Liming Sun 2018-05-03 15:45 ` [PATCH v6 3/3] arm64: defconfig: Enable dw_mmc-bluefield driver Liming Sun 2018-05-08 18:46 ` [PATCH v7 1/3] mmc: dw_mmc-bluefield: Add driver extension Liming Sun 2018-05-09 1:45 ` Shawn Lin 2018-05-21 11:36 ` Ulf Hansson 2019-01-18 10:06 ` Thomas Gleixner 2018-05-08 18:46 ` [PATCH v7 2/3] dt-bindings: mmc: Add binding for BlueField SoC Liming Sun 2018-05-21 11:36 ` Ulf Hansson 2018-05-08 18:46 ` [PATCH v7 3/3] arm64: defconfig: Enable dw_mmc-bluefield driver Liming Sun 2018-05-21 11:36 ` Ulf Hansson 2018-05-21 19:35 ` Liming Sun
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1525198787-46403-1-git-send-email-lsun@mellanox.com \ --to=lsun@mellanox.com \ --cc=catalin.marinas@arm.com \ --cc=devicetree@vger.kernel.org \ --cc=jh80.chung@samsung.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mmc@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=robh+dt@kernel.org \ --cc=stable@kernel.org \ --cc=ulf.hansson@linaro.org \ --cc=will.deacon@arm.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).