[PATCH v4 2/2] usb: dwc2: fix isoc split in transfer with no data

[William Wu <william.wu@rock-chips.com>]

If isoc split in transfer with no data (the length of DATA0
packet is zero), we can't simply return immediately. Because
the DATA0 can be the first transaction or the second transaction
for the isoc split in transaction. If the DATA0 packet with no
data is in the first transaction, we can return immediately.
But if the DATA0 packet with no data is in the second transaction
of isoc split in transaction sequence, we need to increase the
qtd->isoc_frame_index and giveback urb to device driver if needed,
otherwise, the MDATA packet will be lost.

A typical test case is that connect the dwc2 controller with an
usb hs Hub (GL852G-12), and plug an usb fs audio device (Plantronics
headset) into the downstream port of Hub. Then use the usb mic
to record, we can find noise when playback.

In the case, the isoc split in transaction sequence like this:

- SSPLIT IN transaction
- CSPLIT IN transaction
  - MDATA packet (176 bytes)
- CSPLIT IN transaction
  - DATA0 packet (0 byte)

This patch use both the length of DATA0 and qtd->isoc_split_offset
to check if the DATA0 is in the second transaction.

Signed-off-by: William Wu <william.wu@rock-chips.com>
---
Changes in v4:
- None

Changes in v3:
- Remove "qtd->isoc_split_offset = 0" in the if test

Changes in v2:
- Modify the commit message

 drivers/usb/dwc2/hcd_intr.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c
index ba6229e..9751785 100644
--- a/drivers/usb/dwc2/hcd_intr.c
+++ b/drivers/usb/dwc2/hcd_intr.c
@@ -930,9 +930,8 @@ static int dwc2_xfercomp_isoc_split_in(struct dwc2_hsotg *hsotg,
 	frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index];
 	len = dwc2_get_actual_xfer_length(hsotg, chan, chnum, qtd,
 					  DWC2_HC_XFER_COMPLETE, NULL);
-	if (!len) {
+	if (!len && !qtd->isoc_split_offset) {
 		qtd->complete_split = 0;
-		qtd->isoc_split_offset = 0;
 		return 0;
 	}
 
-- 
2.0.0