LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Michel Pollet <michel.pollet@bp.renesas.com>
To: linux-renesas-soc@vger.kernel.org, Simon Horman <horms@verge.net.au>
Cc: phil.edworthy@renesas.com,
	Michel Pollet <buserror+upstream@gmail.com>,
	Michel Pollet <michel.pollet@bp.renesas.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v7 1/5] dt-bindings: Add the r9a06g032-sysctrl.h file
Date: Thu, 24 May 2018 10:28:39 +0100	[thread overview]
Message-ID: <1527154169-32380-2-git-send-email-michel.pollet@bp.renesas.com> (raw)
In-Reply-To: <1527154169-32380-1-git-send-email-michel.pollet@bp.renesas.com>

This adds the constants necessary to use the renesas,r9a06g032-sysctrl node.

Signed-off-by: Michel Pollet <michel.pollet@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 include/dt-bindings/clock/r9a06g032-sysctrl.h | 187 ++++++++++++++++++++++++++
 1 file changed, 187 insertions(+)
 create mode 100644 include/dt-bindings/clock/r9a06g032-sysctrl.h

diff --git a/include/dt-bindings/clock/r9a06g032-sysctrl.h b/include/dt-bindings/clock/r9a06g032-sysctrl.h
new file mode 100644
index 0000000..e3fe69e
--- /dev/null
+++ b/include/dt-bindings/clock/r9a06g032-sysctrl.h
@@ -0,0 +1,187 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * R9A06G032 sysctrl IDs
+ *
+ * Copyright (C) 2018 Renesas Electronics Europe Limited
+ *
+ * Michel Pollet <michel.pollet@bp.renesas.com>, <buserror@gmail.com>
+ * Derived from zx-reboot.c
+ */
+
+#ifndef __DT_BINDINGS_R9A06G032_SYSCTRL_H__
+#define __DT_BINDINGS_R9A06G032_SYSCTRL_H__
+
+#define R9A06G032_CLKOUT			0
+#define R9A06G032_CLK_PLL_USB			1
+#define R9A06G032_CLK_48			1 /* AKA CLK_PLL_USB */
+#define R9A06G032_CLKOUT_D10			2
+#define R9A06G032_CLKOUT_D16			3
+#define R9A06G032_MSEBIS_CLK			3 /* AKA CLKOUT_D16 */
+#define R9A06G032_MSEBIM_CLK			3 /* AKA CLKOUT_D16 */
+#define R9A06G032_CLKOUT_D160			4
+#define R9A06G032_CLKOUT_D1OR2			5
+#define R9A06G032_CLK_DDRPHY_PLLCLK		5 /* AKA CLKOUT_D1OR2 */
+#define R9A06G032_CLKOUT_D20			6
+#define R9A06G032_CLK50				6 /* AKA CLKOUT_D20 */
+#define R9A06G032_CLKOUT_D40			7
+#define R9A06G032_CLK25				7 /* AKA CLKOUT_D40 */
+#define R9A06G032_CLKOUT_D5			8
+#define R9A06G032_CLKOUT_D8			9
+#define R9A06G032_CLK125			9 /* AKA CLKOUT_D8 */
+#define R9A06G032_DIV_ADC			10
+#define R9A06G032_DIV_I2C			11
+#define R9A06G032_DIV_NAND			12
+#define R9A06G032_DIV_P1_PG			13
+#define R9A06G032_DIV_P2_PG			14
+#define R9A06G032_DIV_P3_PG			15
+#define R9A06G032_DIV_P4_PG			16
+#define R9A06G032_DIV_P5_PG			17
+#define R9A06G032_CLK_P5_PG1			17 /* AKA DIV_P5_PG */
+#define R9A06G032_DIV_P6_PG			18
+#define R9A06G032_DIV_QSPI0			19
+#define R9A06G032_DIV_QSPI1			20
+#define R9A06G032_DIV_REF_SYNC			21
+#define R9A06G032_CLK_REF_SYNC			21 /* AKA DIV_REF_SYNC */
+#define R9A06G032_DIV_SDIO0			22
+#define R9A06G032_DIV_SDIO1			23
+#define R9A06G032_DIV_SWITCH			24
+#define R9A06G032_DIV_UART			25
+#define R9A06G032_CLK_25_PG4			26
+#define R9A06G032_CLK_25_PG5			27
+#define R9A06G032_CLK_25_PG6			28
+#define R9A06G032_CLK_25_PG7			29
+#define R9A06G032_CLK_25_PG8			30
+#define R9A06G032_CLK_ADC			31
+#define R9A06G032_CLK_ECAT100			32
+#define R9A06G032_CLK_HSR100			33
+#define R9A06G032_CLK_I2C0			34
+#define R9A06G032_CLK_I2C1			35
+#define R9A06G032_CLK_MII_REF			36
+#define R9A06G032_CLK_NAND			37
+#define R9A06G032_CLK_NOUSBP2_PG6		38
+#define R9A06G032_CLK_P1_PG2			39
+#define R9A06G032_CLK_P1_PG3			40
+#define R9A06G032_CLK_P1_PG4			41
+#define R9A06G032_CLK_P4_PG3			42
+#define R9A06G032_CLK_P4_PG4			43
+#define R9A06G032_CLK_P6_PG1			44
+#define R9A06G032_CLK_P6_PG2			45
+#define R9A06G032_CLK_P6_PG3			46
+#define R9A06G032_CLK_P6_PG4			47
+#define R9A06G032_CLK_PCI_USB			48
+#define R9A06G032_CLK_QSPI0			49
+#define R9A06G032_CLK_QSPI1			50
+#define R9A06G032_CLK_RGMII_REF			51
+#define R9A06G032_CLK_RMII_REF			52
+#define R9A06G032_CLK_SDIO0			53
+#define R9A06G032_CLK_SDIO1			54
+#define R9A06G032_CLK_SERCOS100			55
+#define R9A06G032_CLK_SLCD			56
+#define R9A06G032_CLK_SPI0			57
+#define R9A06G032_CLK_SPI1			58
+#define R9A06G032_CLK_SPI2			59
+#define R9A06G032_CLK_SPI3			60
+#define R9A06G032_CLK_SPI4			61
+#define R9A06G032_CLK_SPI5			62
+#define R9A06G032_CLK_SWITCH			63
+#define R9A06G032_DIV_MOTOR			64
+#define R9A06G032_HCLK_ECAT125			65
+#define R9A06G032_HCLK_PINCONFIG		66
+#define R9A06G032_HCLK_SERCOS			67
+#define R9A06G032_HCLK_SGPIO2			68
+#define R9A06G032_HCLK_SGPIO3			69
+#define R9A06G032_HCLK_SGPIO4			70
+#define R9A06G032_HCLK_TIMER0			71
+#define R9A06G032_HCLK_TIMER1			72
+#define R9A06G032_HCLK_USBF			73
+#define R9A06G032_HCLK_USBH			74
+#define R9A06G032_HCLK_USBPM			75
+#define R9A06G032_CLK_48_PG_F			76
+#define R9A06G032_CLK_48_PG4			77
+#define R9A06G032_CLK_DDRPHY_PLLCLK_D4		78
+#define R9A06G032_CLK_ECAT100_D4		79
+#define R9A06G032_CLK_HSR100_D2			80
+#define R9A06G032_CLK_REF_SYNC_D4		81
+#define R9A06G032_CLK_DDRPHY_PCLK		81 /* AKA CLK_REF_SYNC_D4 */
+#define R9A06G032_CLK_FW			81 /* AKA CLK_REF_SYNC_D4 */
+#define R9A06G032_CLK_CRYPTO			81 /* AKA CLK_REF_SYNC_D4 */
+#define R9A06G032_CLK_REF_SYNC_D8		82
+#define R9A06G032_CLK_SERCOS100_D2		83
+#define R9A06G032_DIV_CA7			84
+#define R9A06G032_CLK_A7MP			84 /* AKA DIV_CA7 */
+#define R9A06G032_HCLK_CAN0			85
+#define R9A06G032_HCLK_CAN1			86
+#define R9A06G032_HCLK_DELTASIGMA		87
+#define R9A06G032_HCLK_PWMPTO			88
+#define R9A06G032_HCLK_RSV			89
+#define R9A06G032_HCLK_SGPIO0			90
+#define R9A06G032_HCLK_SGPIO1			91
+#define R9A06G032_RTOS_MDC			92
+#define R9A06G032_CLK_CM3			93
+#define R9A06G032_CLK_DDRC			94
+#define R9A06G032_CLK_ECAT25			95
+#define R9A06G032_CLK_HSR50			96
+#define R9A06G032_CLK_HW_RTOS			97
+#define R9A06G032_CLK_SERCOS50			98
+#define R9A06G032_HCLK_ADC			99
+#define R9A06G032_HCLK_CM3			100
+#define R9A06G032_HCLK_CRYPTO_EIP150		101
+#define R9A06G032_HCLK_CRYPTO_EIP93		102
+#define R9A06G032_HCLK_DDRC			103
+#define R9A06G032_HCLK_DMA0			104
+#define R9A06G032_HCLK_DMA1			105
+#define R9A06G032_HCLK_GMAC0			106
+#define R9A06G032_HCLK_GMAC1			107
+#define R9A06G032_HCLK_GPIO0			108
+#define R9A06G032_HCLK_GPIO1			109
+#define R9A06G032_HCLK_GPIO2			110
+#define R9A06G032_HCLK_HSR			111
+#define R9A06G032_HCLK_I2C0			112
+#define R9A06G032_HCLK_I2C1			113
+#define R9A06G032_HCLK_LCD			114
+#define R9A06G032_HCLK_MSEBI_M			115
+#define R9A06G032_HCLK_MSEBI_S			116
+#define R9A06G032_HCLK_NAND			117
+#define R9A06G032_HCLK_PG_I			118
+#define R9A06G032_HCLK_PG19			119
+#define R9A06G032_HCLK_PG20			120
+#define R9A06G032_HCLK_PG3			121
+#define R9A06G032_HCLK_PG4			122
+#define R9A06G032_HCLK_QSPI0			123
+#define R9A06G032_HCLK_QSPI1			124
+#define R9A06G032_HCLK_ROM			125
+#define R9A06G032_HCLK_RTC			126
+#define R9A06G032_HCLK_SDIO0			127
+#define R9A06G032_HCLK_SDIO1			128
+#define R9A06G032_HCLK_SEMAP			129
+#define R9A06G032_HCLK_SPI0			130
+#define R9A06G032_HCLK_SPI1			131
+#define R9A06G032_HCLK_SPI2			132
+#define R9A06G032_HCLK_SPI3			133
+#define R9A06G032_HCLK_SPI4			134
+#define R9A06G032_HCLK_SPI5			135
+#define R9A06G032_HCLK_SWITCH			136
+#define R9A06G032_HCLK_SWITCH_RG		137
+#define R9A06G032_HCLK_UART0			138
+#define R9A06G032_HCLK_UART1			139
+#define R9A06G032_HCLK_UART2			140
+#define R9A06G032_HCLK_UART3			141
+#define R9A06G032_HCLK_UART4			142
+#define R9A06G032_HCLK_UART5			143
+#define R9A06G032_HCLK_UART6			144
+#define R9A06G032_HCLK_UART7			145
+#define R9A06G032_CLK_UART0			146
+#define R9A06G032_CLK_UART1			147
+#define R9A06G032_CLK_UART2			148
+#define R9A06G032_CLK_UART3			149
+#define R9A06G032_CLK_UART4			150
+#define R9A06G032_CLK_UART5			151
+#define R9A06G032_CLK_UART6			152
+#define R9A06G032_CLK_UART7			153
+
+#define R9A06G032_UART_GROUP_012		154
+#define R9A06G032_UART_GROUP_34567		155
+
+#define R9A06G032_CLOCK_COUNT		(R9A06G032_UART_GROUP_34567 + 1)
+
+#endif /* __DT_BINDINGS_R9A06G032_SYSCTRL_H__ */
-- 
2.7.4

  reply	other threads:[~2018-05-24  9:34 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-24  9:28 [PATCH v7 0/5] arm: Base support for Renesas RZN1D-DB Board Michel Pollet
2018-05-24  9:28 ` Michel Pollet [this message]
2018-05-25 10:31   ` [PATCH v7 1/5] dt-bindings: Add the r9a06g032-sysctrl.h file Geert Uytterhoeven
2018-05-31  9:11     ` M P
2018-05-31  9:32       ` Geert Uytterhoeven
2018-05-31 10:01         ` M P
2018-06-01  8:18           ` Geert Uytterhoeven
2018-05-24  9:28 ` [PATCH v7 2/5] dt-bindings: clock: renesas,r9a06g032-sysctrl: documentation Michel Pollet
2018-05-25  9:23   ` Geert Uytterhoeven
2018-05-31 10:16     ` M P
2018-06-01  8:22       ` Geert Uytterhoeven
2018-05-24  9:28 ` [PATCH v7 3/5] ARM: dts: Renesas R9A06G032 base device tree file Michel Pollet
2018-05-25  9:27   ` Geert Uytterhoeven
2018-05-28  9:15     ` Simon Horman
2018-05-24  9:28 ` [PATCH v7 4/5] ARM: dts: Renesas RZN1D-DB Board base file Michel Pollet
2018-05-25  9:28   ` Geert Uytterhoeven
2018-05-24  9:28 ` [PATCH v7 5/5] clk: renesas: Renesas R9A06G032 clock driver Michel Pollet
2018-05-26 13:45   ` kbuild test robot
2018-05-30 19:49   ` Geert Uytterhoeven

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1527154169-32380-2-git-send-email-michel.pollet@bp.renesas.com \
    --to=michel.pollet@bp.renesas.com \
    --cc=buserror+upstream@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=horms@verge.net.au \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=phil.edworthy@renesas.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --subject='Re: [PATCH v7 1/5] dt-bindings: Add the r9a06g032-sysctrl.h file' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).