LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Erin Lo <email@example.com>
To: Matthias Brugger <firstname.lastname@example.org>
Cc: Mark Rutland <email@example.com>, <firstname.lastname@example.org>,
"Jason Cooper" <email@example.com>,
Marc Zyngier <firstname.lastname@example.org>,
"Greg Kroah-Hartman" <email@example.com>,
<firstname.lastname@example.org>, Rob Herring <email@example.com>,
Thomas Gleixner <firstname.lastname@example.org>,
Subject: Re: [PATCH v3 0/4] Add basic support for Mediatek MT8183 SoC
Date: Sat, 21 Jul 2018 15:28:54 +0800 [thread overview]
Message-ID: <1532158134.16009.10.camel@mtksdaap41> (raw)
On Fri, 2018-07-20 at 12:44 +0200, Matthias Brugger wrote:
> On 20/07/18 10:19, Erin Lo wrote:
> > On Mon, 2018-07-16 at 11:28 +0200, Matthias Brugger wrote:
> >> Hi Erin,
> >> On 17/05/18 08:22, Erin Lo wrote:
> >>> MT8183 is a SoC based on 64bit ARMv8 architecture.
> >>> It contains 4 CA53 and 4 CA73 cores.
> >>> MT8183 share many HW IP with MT65xx series.
> >>> This patchset was tested on MT8183 evaluation board, and boot to shell ok.
> >>> This series contains document bindings, device tree including interrupt, uart.
> >>> Change in v3:
> >>> 1. Fill out GICC, GICH, GICV regions
> >>> 2. Update Copyright to 2018
> >>> Change in v2:
> >>> 1. Split dt-bindings into different patches
> >>> 2. Correct bindings for supported SoCs (mtk-uart.txt)
> >>> Ben Ho (1):
> >>> arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and
> >>> Makefile
> >>> Erin Lo (3):
> >>> dt-bindings: arm: Add bindings for Mediatek MT8183 SoC Platform
> >>> dt-bindings: mtk-sysirq: Add compatible for Mediatek MT8183
> >>> dt-bindings: serial: Add compatible for Mediatek MT8183
> >> I'm a bit reluctant to take this series, as it will only enable the EVB board to
> >> boot into a serial console. Are you planning to add support for other devices of
> >> this SoC?
> >> Apart please take into account that there is an issue with the dts file, as you
> >> were told by the kbuild test robot.
> >> Regards,
> >> Matthias
> > Hi, Matthias
> > Sorry for missing this letter...since mail proxy server.
> > We plan to add support all the devices of MT8183 in serious.
> > We have implemented the clock and pinctrl driver for upstream and they
> > are in internal review right now.
> Nice to hear that :)
> > About the dts issue... do you suggest me to send new patch right now or
> > wait for clock and pinctrl driver ready then send them together?
> I would prefer that you send at least the clock controller together, so that we
> don't have any dummy clocks in the basic device tree.
Got it! Next patch, we will send them with clock controller without
dummy clocks in the basic device tree.
By the way, the clock controller driver of MT8183 is a little bit
different from former ICs, so we need more time to prepare them.
We will send them to public as soon as possible.
> Linux-mediatek mailing list
next prev parent reply other threads:[~2018-07-21 7:29 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-17 6:22 Erin Lo
2018-05-17 6:22 ` [PATCH v3 1/4] dt-bindings: arm: Add bindings for Mediatek MT8183 SoC Platform Erin Lo
2018-05-22 17:14 ` Rob Herring
2018-05-17 6:22 ` [PATCH v3 2/4] dt-bindings: mtk-sysirq: Add compatible for Mediatek MT8183 Erin Lo
2018-05-22 17:15 ` Rob Herring
2018-05-17 6:22 ` [PATCH v3 3/4] dt-bindings: serial: " Erin Lo
2018-05-22 17:15 ` Rob Herring
2018-05-17 6:22 ` [PATCH v3 4/4] arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and Makefile Erin Lo
2018-05-19 10:07 ` kbuild test robot
2018-07-16 9:28 ` [PATCH v3 0/4] Add basic support for Mediatek MT8183 SoC Matthias Brugger
2018-07-20 8:19 ` Erin Lo
2018-07-20 10:44 ` Matthias Brugger
2018-07-21 7:28 ` Erin Lo [this message]
2018-07-22 21:11 ` Matthias Brugger
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--subject='Re: [PATCH v3 0/4] Add basic support for Mediatek MT8183 SoC' \
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).