LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Tony Xie <tony.xie@rock-chips.com>
To: heiko@sntech.de
Cc: broonie@kernel.org, lee.jones@linaro.org, robh+dt@kernel.org,
mark.rutland@arm.com, a.zummo@towertech.it,
alexandre.belloni@bootlin.com, sboyd@kernel.org,
linux-clk@vger.kernel.org, linux-rtc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, chenjh@rock-chips.com,
xsf@rock-chips.com, zhangqing@rock-chips.com,
huangtao@rock-chips.com, tony.xie@rock-chips.com
Subject: [PATCH v6 5/6] rtc: rk808: add RK809 and RK817 support.
Date: Tue, 30 Oct 2018 18:16:40 +0800 [thread overview]
Message-ID: <1540894600-2828-1-git-send-email-tony.xie@rock-chips.com> (raw)
In-Reply-To: <1540894081-31270-1-git-send-email-tony.xie@rock-chips.com>
RK809 and RK817 are power management IC chips for multimedia products.
Most of their functions and registers are same, including the rtc.
Signed-off-by: Tony Xie <tony.xie@rock-chips.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/rtc/Kconfig | 4 +--
drivers/rtc/rtc-rk808.c | 68 +++++++++++++++++++++++++++++++++++++++----------
2 files changed, 56 insertions(+), 16 deletions(-)
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index a2ba5db..1aaf935 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -371,11 +371,11 @@ config RTC_DRV_MAX77686
will be called rtc-max77686.
config RTC_DRV_RK808
- tristate "Rockchip RK805/RK808/RK818 RTC"
+ tristate "Rockchip RK805/RK808/RK809/RK817/RK818 RTC"
depends on MFD_RK808
help
If you say yes here you will get support for the
- RTC of RK805, RK808 and RK818 PMIC.
+ RTC of RK805, RK809 and RK817, RK808 and RK818 PMIC.
This driver can also be built as a module. If so, the module
will be called rk808-rtc.
diff --git a/drivers/rtc/rtc-rk808.c b/drivers/rtc/rtc-rk808.c
index 739c0d4..5bacdaf 100644
--- a/drivers/rtc/rtc-rk808.c
+++ b/drivers/rtc/rtc-rk808.c
@@ -50,9 +50,18 @@
#define NUM_TIME_REGS (RK808_WEEKS_REG - RK808_SECONDS_REG + 1)
#define NUM_ALARM_REGS (RK808_ALARM_YEARS_REG - RK808_ALARM_SECONDS_REG + 1)
+struct rk_rtc_compat_reg {
+ unsigned int ctrl_reg;
+ unsigned int status_reg;
+ unsigned int alarm_seconds_reg;
+ unsigned int int_reg;
+ unsigned int seconds_reg;
+};
+
struct rk808_rtc {
struct rk808 *rk808;
struct rtc_device *rtc;
+ struct rk_rtc_compat_reg *creg;
int irq;
};
@@ -101,7 +110,7 @@ static int rk808_rtc_readtime(struct device *dev, struct rtc_time *tm)
int ret;
/* Force an update of the shadowed registers right now */
- ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG,
+ ret = regmap_update_bits(rk808->regmap, rk808_rtc->creg->ctrl_reg,
BIT_RTC_CTRL_REG_RTC_GET_TIME,
BIT_RTC_CTRL_REG_RTC_GET_TIME);
if (ret) {
@@ -115,7 +124,7 @@ static int rk808_rtc_readtime(struct device *dev, struct rtc_time *tm)
* 32khz. If we clear the GET_TIME bit here, the time of i2c transfer
* certainly more than 31.25us: 16 * 2.5us at 400kHz bus frequency.
*/
- ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG,
+ ret = regmap_update_bits(rk808->regmap, rk808_rtc->creg->ctrl_reg,
BIT_RTC_CTRL_REG_RTC_GET_TIME,
0);
if (ret) {
@@ -123,7 +132,7 @@ static int rk808_rtc_readtime(struct device *dev, struct rtc_time *tm)
return ret;
}
- ret = regmap_bulk_read(rk808->regmap, RK808_SECONDS_REG,
+ ret = regmap_bulk_read(rk808->regmap, rk808_rtc->creg->seconds_reg,
rtc_data, NUM_TIME_REGS);
if (ret) {
dev_err(dev, "Failed to bulk read rtc_data: %d\n", ret);
@@ -166,7 +175,7 @@ static int rk808_rtc_set_time(struct device *dev, struct rtc_time *tm)
rtc_data[6] = bin2bcd(tm->tm_wday);
/* Stop RTC while updating the RTC registers */
- ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG,
+ ret = regmap_update_bits(rk808->regmap, rk808_rtc->creg->ctrl_reg,
BIT_RTC_CTRL_REG_STOP_RTC_M,
BIT_RTC_CTRL_REG_STOP_RTC_M);
if (ret) {
@@ -174,14 +183,14 @@ static int rk808_rtc_set_time(struct device *dev, struct rtc_time *tm)
return ret;
}
- ret = regmap_bulk_write(rk808->regmap, RK808_SECONDS_REG,
+ ret = regmap_bulk_write(rk808->regmap, rk808_rtc->creg->seconds_reg,
rtc_data, NUM_TIME_REGS);
if (ret) {
dev_err(dev, "Failed to bull write rtc_data: %d\n", ret);
return ret;
}
/* Start RTC again */
- ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG,
+ ret = regmap_update_bits(rk808->regmap, rk808_rtc->creg->ctrl_reg,
BIT_RTC_CTRL_REG_STOP_RTC_M, 0);
if (ret) {
dev_err(dev, "Failed to update RTC control: %d\n", ret);
@@ -199,8 +208,13 @@ static int rk808_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
uint32_t int_reg;
int ret;
- ret = regmap_bulk_read(rk808->regmap, RK808_ALARM_SECONDS_REG,
+ ret = regmap_bulk_read(rk808->regmap,
+ rk808_rtc->creg->alarm_seconds_reg,
alrm_data, NUM_ALARM_REGS);
+ if (ret) {
+ dev_err(dev, "Failed to read RTC alarm date REG: %d\n", ret);
+ return ret;
+ }
alrm->time.tm_sec = bcd2bin(alrm_data[0] & SECONDS_REG_MSK);
alrm->time.tm_min = bcd2bin(alrm_data[1] & MINUTES_REG_MAK);
@@ -210,7 +224,7 @@ static int rk808_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
alrm->time.tm_year = (bcd2bin(alrm_data[5] & YEARS_REG_MSK)) + 100;
rockchip_to_gregorian(&alrm->time);
- ret = regmap_read(rk808->regmap, RK808_RTC_INT_REG, &int_reg);
+ ret = regmap_read(rk808->regmap, rk808_rtc->creg->int_reg, &int_reg);
if (ret) {
dev_err(dev, "Failed to read RTC INT REG: %d\n", ret);
return ret;
@@ -231,7 +245,7 @@ static int rk808_rtc_stop_alarm(struct rk808_rtc *rk808_rtc)
struct rk808 *rk808 = rk808_rtc->rk808;
int ret;
- ret = regmap_update_bits(rk808->regmap, RK808_RTC_INT_REG,
+ ret = regmap_update_bits(rk808->regmap, rk808_rtc->creg->int_reg,
BIT_RTC_INTERRUPTS_REG_IT_ALARM_M, 0);
return ret;
@@ -242,7 +256,7 @@ static int rk808_rtc_start_alarm(struct rk808_rtc *rk808_rtc)
struct rk808 *rk808 = rk808_rtc->rk808;
int ret;
- ret = regmap_update_bits(rk808->regmap, RK808_RTC_INT_REG,
+ ret = regmap_update_bits(rk808->regmap, rk808_rtc->creg->int_reg,
BIT_RTC_INTERRUPTS_REG_IT_ALARM_M,
BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
@@ -274,7 +288,8 @@ static int rk808_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
alrm_data[4] = bin2bcd(alrm->time.tm_mon + 1);
alrm_data[5] = bin2bcd(alrm->time.tm_year - 100);
- ret = regmap_bulk_write(rk808->regmap, RK808_ALARM_SECONDS_REG,
+ ret = regmap_bulk_write(rk808->regmap,
+ rk808_rtc->creg->alarm_seconds_reg,
alrm_data, NUM_ALARM_REGS);
if (ret) {
dev_err(dev, "Failed to bulk write: %d\n", ret);
@@ -318,7 +333,7 @@ static irqreturn_t rk808_alarm_irq(int irq, void *data)
struct i2c_client *client = rk808->i2c;
int ret;
- ret = regmap_write(rk808->regmap, RK808_RTC_STATUS_REG,
+ ret = regmap_write(rk808->regmap, rk808_rtc->creg->status_reg,
RTC_STATUS_MASK);
if (ret) {
dev_err(&client->dev,
@@ -371,6 +386,22 @@ static int rk808_rtc_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(rk808_rtc_pm_ops,
rk808_rtc_suspend, rk808_rtc_resume);
+static struct rk_rtc_compat_reg rk808_creg = {
+ .ctrl_reg = RK808_RTC_CTRL_REG,
+ .status_reg = RK808_RTC_STATUS_REG,
+ .alarm_seconds_reg = RK808_ALARM_SECONDS_REG,
+ .int_reg = RK808_RTC_INT_REG,
+ .seconds_reg = RK808_SECONDS_REG,
+};
+
+static struct rk_rtc_compat_reg rk817_creg = {
+ .ctrl_reg = RK817_RTC_CTRL_REG,
+ .status_reg = RK817_RTC_STATUS_REG,
+ .alarm_seconds_reg = RK817_ALARM_SECONDS_REG,
+ .int_reg = RK817_RTC_INT_REG,
+ .seconds_reg = RK817_SECONDS_REG,
+};
+
static int rk808_rtc_probe(struct platform_device *pdev)
{
struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
@@ -381,11 +412,20 @@ static int rk808_rtc_probe(struct platform_device *pdev)
if (rk808_rtc == NULL)
return -ENOMEM;
+ switch (rk808->variant) {
+ case RK809_ID:
+ case RK817_ID:
+ rk808_rtc->creg = &rk817_creg;
+ break;
+ default:
+ rk808_rtc->creg = &rk808_creg;
+ break;
+ }
platform_set_drvdata(pdev, rk808_rtc);
rk808_rtc->rk808 = rk808;
/* start rtc running by default, and use shadowed timer. */
- ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG,
+ ret = regmap_update_bits(rk808->regmap, rk808_rtc->creg->ctrl_reg,
BIT_RTC_CTRL_REG_STOP_RTC_M |
BIT_RTC_CTRL_REG_RTC_READSEL_M,
BIT_RTC_CTRL_REG_RTC_READSEL_M);
@@ -395,7 +435,7 @@ static int rk808_rtc_probe(struct platform_device *pdev)
return ret;
}
- ret = regmap_write(rk808->regmap, RK808_RTC_STATUS_REG,
+ ret = regmap_write(rk808->regmap, rk808_rtc->creg->status_reg,
RTC_STATUS_MASK);
if (ret) {
dev_err(&pdev->dev,
--
1.9.1
next prev parent reply other threads:[~2018-10-30 10:14 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-30 10:07 [PATCH v6 0/6] support a new type of PMIC,including two chips(rk817 and rk809) Tony Xie
2018-10-30 10:07 ` [PATCH v6 1/6] regmap: add a new macro:REGMAP_IRQ_REG_LINE(_id, _reg_bits) Tony Xie
2018-11-14 22:22 ` Mark Brown
2018-10-30 10:07 ` [PATCH v6 2/6] mfd: rk808: Add RK817 and RK809 support Tony Xie
2018-11-13 7:26 ` Lee Jones
2018-10-30 10:07 ` [PATCH v6 3/6] regulator: rk808: add RK809 and RK817 support Tony Xie
2018-10-30 10:07 ` [PATCH v6 4/6] dt-bindings: mfd: rk808: Add binding information for RK809 and RK817 Tony Xie
2018-10-30 10:16 ` Tony Xie [this message]
2018-10-30 10:17 ` [PATCH v6 6/6] clk: RK808: add RK809 and RK817 support Tony Xie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1540894600-2828-1-git-send-email-tony.xie@rock-chips.com \
--to=tony.xie@rock-chips.com \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@bootlin.com \
--cc=broonie@kernel.org \
--cc=chenjh@rock-chips.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=huangtao@rock-chips.com \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-rtc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=xsf@rock-chips.com \
--cc=zhangqing@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).