LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Stephen Boyd <sboyd@kernel.org>
To: Michael Turquette <mturquette@baylibre.com>,
	Taniya Das <tdas@codeaurora.org>
Cc: Andy Gross <andy.gross@linaro.org>,
	David Brown <david.brown@linaro.org>,
	Rajendra Nayak <rnayak@codeaurora.org>,
	linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
	linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
	chandanu@codeaurora.org, linux-arm-msm-owner@vger.kernel.org
Subject: Re: [PATCH v1 2/2] clk: qcom : dispcc: Add support for display port clocks
Date: Tue, 30 Oct 2018 09:33:56 -0700	[thread overview]
Message-ID: <154091723693.98144.6979314028521443413@swboyd.mtv.corp.google.com> (raw)
In-Reply-To: <f3e40308-d2dd-cce9-4b19-3af419841bc1@codeaurora.org>

Quoting Taniya Das (2018-10-29 23:01:44)
> On 10/30/2018 12:13 AM, Stephen Boyd wrote:
> > Quoting Taniya Das (2018-10-28 03:34:55)
> >> On 2018-10-19 16:04, Taniya Das wrote:
> >>> On 10/10/2018 2:04 AM, Stephen Boyd wrote:
> >>>> Quoting Taniya Das (2018-10-09 06:57:47)
> >>>>> diff --git a/drivers/clk/qcom/dispcc-sdm845.c
> >>>>> b/drivers/clk/qcom/dispcc-sdm845.c
> >>>>> index 0cc4909..6d3136a 100644
> >>>>> --- a/drivers/clk/qcom/dispcc-sdm845.c
> >>>>> +++ b/drivers/clk/qcom/dispcc-sdm845.c
> >>>>> +       },
> >>>>> +};
> >>>>> +
> >>>>> +static const struct freq_tbl ftbl_disp_cc_mdss_dp_link_clk_src[] = {
> >>>>> +       F(162000, P_DP_PHY_PLL_LINK_CLK,   1,   0,   0),
> >>>>> +       F(270000, P_DP_PHY_PLL_LINK_CLK,   1,   0,   0),
> >>>>> +       F(540000, P_DP_PHY_PLL_LINK_CLK,   1,   0,   0),
> >>>>> +       F(810000, P_DP_PHY_PLL_LINK_CLK,   1,   0,   0),
> >>>>
> >>>> Are these in kHz? They really look like it and that's bad. Why do we
> >>>> need them at all? Just to make sure the display driver picks these
> >>>> exact
> >>>> frequencies? It seems like we could just pass whatever number comes in
> >>>> up to the parent and see what it can do.
> >>>>
> >>>
> >>> Let me check back the reason we had to make this change.
> >>
> >> We will need this flag since we reset/power-down the PLL every time we
> >> disconnect/connect the DP cable or during suspend/resume. Only with this
> >> flag, the calls to the PLL driver are properly called.
> > 
> > What does this mean? I wanted to know about the weird frequencies listed
> > above, and why it can't be done without a frequency table and direct
> > rates passed up to the parent.
> >
> 
> OOps, my bad :(.
> 
> We added these changes to handle higher clock rates. These rates when 
> greater than 4.3Ghz cannot be represented in 32bit variables. For DP, we 
> already have 5.4G and 8.1GHz freq for VCO clock. We will need these Khz 
> freq list in clock driver.
>   Let me check if they can do something like the byte/pixel clocks of 
> display.

Well then we really should just throw away the freq table here and have
rcg ops that pass the frequency up to the display PLL. Also, those
numbers look like gigabits per second (Gbit/s) for the DP spec which
isn't exactly the same as a clk frequency. What frequency does the PLL
run at for these various DP link speeds?


  reply	other threads:[~2018-10-30 16:34 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-09 13:57 [PATCH v1 0/2] Add support for display port clocks and clock ops Taniya Das
2018-10-09 13:57 ` [PATCH v1 1/2] clk: qcom: rcg2: Add support for display port " Taniya Das
2018-10-09 20:46   ` Stephen Boyd
2018-10-19 10:31     ` Taniya Das
2018-10-09 13:57 ` [PATCH v1 2/2] clk: qcom : dispcc: Add support for display port clocks Taniya Das
2018-10-09 20:34   ` Stephen Boyd
2018-10-19 10:34     ` Taniya Das
2018-10-28 10:34       ` Taniya Das
2018-10-29 18:43         ` Stephen Boyd
2018-10-30  6:01           ` Taniya Das
2018-10-30 16:33             ` Stephen Boyd [this message]
2018-11-01  5:02               ` Taniya Das
2018-11-06 17:08                 ` Stephen Boyd
2018-11-12  3:41                   ` chandanu
2019-02-02  0:05           ` chandanu
2019-07-15 22:59             ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=154091723693.98144.6979314028521443413@swboyd.mtv.corp.google.com \
    --to=sboyd@kernel.org \
    --cc=andy.gross@linaro.org \
    --cc=chandanu@codeaurora.org \
    --cc=david.brown@linaro.org \
    --cc=linux-arm-msm-owner@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=rnayak@codeaurora.org \
    --cc=tdas@codeaurora.org \
    --subject='Re: [PATCH v1 2/2] clk: qcom : dispcc: Add support for display port clocks' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).