LKML Archive on
help / color / mirror / Atom feed
From: Alan Douglas <>
To: <>, <>,
	<>, <>,
Cc: Alan Douglas <>
Subject: [PATCH v2 0/2] phy: cadence: Add driver and dt-bindings for Sierra PHY
Date: Wed, 31 Oct 2018 16:33:38 +0000	[thread overview]
Message-ID: <> (raw)

The Cadence Sierra PHY supports a number of different protocols.  This
series adds a driver with support for USB3 and PCIe modes.

Only one clock frequency is currently supported, so the value of clock
provided in device tree is ignored.

Changes since v1:
* Moved subnode resets into each subnode in devicetree bindings
* Modified driver to put subnode resets on exit
* Changed driver filename to phy-cdns-sierra.c

Changes since RFC v2:
* Devicetree bindings modified as suggested by Rob Herring.
* Tidy up and correction of return paths in probe function.

Changes since RFC v1:
* Each group of lanes is now treated as a subnode, and a generic PHY
  device is created for each group.
* General cleanup based on comments
* A reset is now required for each subnode.  The complete PHY block
  is taken out of reset at initial probe, and remains out of reset.
* Added a binding to allow for hardware configuration of PHY registers

Alan Douglas (2):
  dt-bindings: phy: Document cadence Sierra PHY bindings
  phy: cadence: Add driver for Sierra PHY

 .../devicetree/bindings/phy/cdns-sierra-phy.txt    |  68 ++++
 drivers/phy/Kconfig                                |   1 +
 drivers/phy/Makefile                               |   1 +
 drivers/phy/cadence/Kconfig                        |   9 +
 drivers/phy/cadence/Makefile                       |   2 +
 drivers/phy/cadence/phy-cdns-sierra.c              | 395 +++++++++++++++++++++
 6 files changed, 476 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/cdns-sierra-phy.txt
 create mode 100644 drivers/phy/cadence/Kconfig
 create mode 100644 drivers/phy/cadence/Makefile
 create mode 100644 drivers/phy/cadence/phy-cdns-sierra.c


             reply	other threads:[~2018-10-31 16:34 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-31 16:33 Alan Douglas [this message]
2018-11-12 10:13 ` Kishon Vijay Abraham I

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \
    --subject='Re: [PATCH v2 0/2] phy: cadence: Add driver and dt-bindings for Sierra PHY' \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).