LKML Archive on lore.kernel.org
 help / color / Atom feed
From: <Codrin.Ciubotariu@microchip.com>
To: <wsa@kernel.org>
Cc: <linux-i2c@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>, <robh+dt@kernel.org>,
	<Ludovic.Desroches@microchip.com>, <Nicolas.Ferre@microchip.com>,
	<alexandre.belloni@bootlin.com>, <linux@armlinux.org.uk>,
	<kamel.bouhara@bootlin.com>
Subject: Re: Re: Re: [RFC PATCH 4/4] i2c: at91: Move to generic GPIO bus recovery
Date: Fri, 4 Sep 2020 08:55:30 +0000
Message-ID: <15466c95-f1ea-63a4-1429-24d9b7567c1c@microchip.com> (raw)
In-Reply-To: <20200826061444.GB1081@ninjato>

On 26.08.2020 09:14, Wolfram Sang wrote:
> 
>> Thanks, this would be great! I tested this on a sam9x60, with the HW
>> feature for the 9 pulses disabled, with a picky audio codec as I2C device.
>> Please let me know of the result.
> 
> I can't make use of the feature on the platform I had in mind, sadly. It
> doesn't really support switching from/to GPIO pinctrl states. If that
> ever changes, I will add bus recovery for that controller, but I think
> this is low priority.

The pinmux driver needs to have strict set to false, otherwise the 
switching is not available, not at this time at least. Perhaps there is 
room for improvement here, because the I2C bus is not using the pins 
while we are doing GPIO recovery.

> 
> On the good side, there are patches which make i2c-mv64xxx another user
> of your new mechanism, so everything is well, I think.
> 

I saw them, I will try to take a look.
I am not sure I'll have time the next week to work on what you asked me 
regarding sh_mobile and PXA, but I will look into it the week after that.
Sorry about my delayed reply, I was on vacation.

Best regards,
Codrin

  reply index

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-19 14:19 [RFC PATCH 0/4] i2c: core: add " Codrin Ciubotariu
2020-06-19 14:19 ` [RFC PATCH 1/4] dt-binding: i2c: add generic properties for " Codrin Ciubotariu
2020-07-05 21:19   ` Wolfram Sang
2020-07-24 19:39     ` Wolfram Sang
2020-07-24 20:52       ` Russell King - ARM Linux admin
2020-07-27 10:44         ` Codrin.Ciubotariu
2020-07-27 10:50           ` Russell King - ARM Linux admin
2020-07-30  9:00             ` Codrin.Ciubotariu
2020-08-03 14:16               ` Russell King - ARM Linux admin
2020-08-03 16:42                 ` Codrin.Ciubotariu
2020-07-15 19:21   ` Rob Herring
2020-06-19 14:19 ` [RFC PATCH 2/4] i2c: core: add generic I2C GPIO recovery Codrin Ciubotariu
2020-08-02 16:54   ` Wolfram Sang
2020-08-03 13:27     ` Codrin.Ciubotariu
2020-08-03 16:49       ` wsa
2020-06-19 14:19 ` [RFC PATCH 3/4] i2c: core: treat EPROBE_DEFER when acquiring SCL/SDA GPIOs Codrin Ciubotariu
2020-08-02 17:05   ` Wolfram Sang
2020-08-03 15:33     ` Codrin.Ciubotariu
2020-08-03 16:59       ` wsa
2020-06-19 14:19 ` [RFC PATCH 4/4] i2c: at91: Move to generic GPIO bus recovery Codrin Ciubotariu
2020-08-02 17:08   ` Wolfram Sang
2020-08-03 15:42     ` Codrin.Ciubotariu
2020-08-03 16:59       ` wsa
2020-08-26  6:14       ` Wolfram Sang
2020-09-04  8:55         ` Codrin.Ciubotariu [this message]
2020-09-04  9:20           ` Wolfram Sang
2020-07-05 21:09 ` [RFC PATCH 0/4] i2c: core: add " Wolfram Sang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=15466c95-f1ea-63a4-1429-24d9b7567c1c@microchip.com \
    --to=codrin.ciubotariu@microchip.com \
    --cc=Ludovic.Desroches@microchip.com \
    --cc=Nicolas.Ferre@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kamel.bouhara@bootlin.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=robh+dt@kernel.org \
    --cc=wsa@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lkml.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lkml.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lkml.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lkml.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lkml.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lkml.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lkml.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lkml.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lkml.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lkml.kernel.org/lkml/9 lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lkml.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git