LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH V19 1/7] i2c: tegra: sort all the include headers alphabetically
@ 2019-02-12 19:06 Sowjanya Komatineni
  2019-02-12 19:06 ` [PATCH V19 2/7] i2c: tegra: add bus clear Master Support Sowjanya Komatineni
                   ` (7 more replies)
  0 siblings, 8 replies; 23+ messages in thread
From: Sowjanya Komatineni @ 2019-02-12 19:06 UTC (permalink / raw)
  To: thierry.reding, jonathanh, mkarthik, smohammed, talho, skomatineni
  Cc: wsa, peda, digetx, linux-tegra, linux-kernel, linux-i2c

This patch sorts all the include headers alphabetically for the
I2C Tegra driver.

Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
 [V9/V10/V11/V12/V13/V14/V15/V16/V17/V18/V19] : Rebased to 5.0-rc4
 [V3/V4/V5/V7/V8] : Removed unsued headers in tegra I2C
 [V2] 		  : Added this in V2 to sort the headers in tegra I2C



 drivers/i2c/busses/i2c-tegra.c | 19 ++++++++-----------
 1 file changed, 8 insertions(+), 11 deletions(-)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index c77adbbea0c7..79c6aa87499b 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -6,24 +6,21 @@
  * Author: Colin Cross <ccross@android.com>
  */
 
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/i2c.h>
-#include <linux/io.h>
+#include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/of_device.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/reset.h>
+#include <linux/of_device.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
-#include <linux/iopoll.h>
-
-#include <asm/unaligned.h>
+#include <linux/reset.h>
 
 #define TEGRA_I2C_TIMEOUT (msecs_to_jiffies(1000))
 #define BYTES_PER_FIFO_WORD 4
-- 
2.7.4


^ permalink raw reply	[flat|nested] 23+ messages in thread

* [PATCH V19 2/7] i2c: tegra: add bus clear Master Support
  2019-02-12 19:06 [PATCH V19 1/7] i2c: tegra: sort all the include headers alphabetically Sowjanya Komatineni
@ 2019-02-12 19:06 ` Sowjanya Komatineni
  2019-02-12 19:06 ` [PATCH V19 3/7] i2c: tegra: fix maximum transfer size Sowjanya Komatineni
                   ` (6 subsequent siblings)
  7 siblings, 0 replies; 23+ messages in thread
From: Sowjanya Komatineni @ 2019-02-12 19:06 UTC (permalink / raw)
  To: thierry.reding, jonathanh, mkarthik, smohammed, talho, skomatineni
  Cc: wsa, peda, digetx, linux-tegra, linux-kernel, linux-i2c

Bus clear feature of Tegra I2C controller helps to recover from
bus hang when I2C master loses the bus arbitration due to the
slave device holding SDA LOW continuously for some unknown reasons.

Per I2C specification, the device that held the bus LOW should
release it within 9 clock pulses.

During bus clear operation, Tegra I2C controller sends 9 clock
pulses and terminates the transaction with STOP condition.
Upon successful bus clear operation, bus goes to idle state and
driver retries the transaction.

Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
 [V19] 		  : updated to use i2c bus recovery through i2c core adapter
		    using i2c_bus_recovery_info
 [V9/V10/V11/V12/V13/V14/V15/V16/V17/V18] : Rebased to 5.0-rc4
 [V5/V6/V7/V8]	  : Same as V4
 [V4]		  : Added I2C Bus Clear support patch to this version of series.


 drivers/i2c/busses/i2c-tegra.c | 81 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 81 insertions(+)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 79c6aa87499b..a46446dbc48a 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -51,6 +51,7 @@
 #define I2C_FIFO_STATUS_RX_SHIFT		0
 #define I2C_INT_MASK				0x064
 #define I2C_INT_STATUS				0x068
+#define I2C_INT_BUS_CLR_DONE			BIT(11)
 #define I2C_INT_PACKET_XFER_COMPLETE		BIT(7)
 #define I2C_INT_ALL_PACKETS_XFER_COMPLETE	BIT(6)
 #define I2C_INT_TX_FIFO_OVERFLOW		BIT(5)
@@ -93,6 +94,15 @@
 #define I2C_HEADER_MASTER_ADDR_SHIFT		12
 #define I2C_HEADER_SLAVE_ADDR_SHIFT		1
 
+#define I2C_BUS_CLEAR_CNFG			0x084
+#define I2C_BC_SCLK_THRESHOLD			9
+#define I2C_BC_SCLK_THRESHOLD_SHIFT		16
+#define I2C_BC_STOP_COND			BIT(2)
+#define I2C_BC_TERMINATE			BIT(1)
+#define I2C_BC_ENABLE				BIT(0)
+#define I2C_BUS_CLEAR_STATUS			0x088
+#define I2C_BC_STATUS				BIT(0)
+
 #define I2C_CONFIG_LOAD				0x08C
 #define I2C_MSTR_CONFIG_LOAD			BIT(0)
 #define I2C_SLV_CONFIG_LOAD			BIT(1)
@@ -154,6 +164,8 @@ enum msg_end_type {
  *		be transferred in one go.
  * @quirks: i2c adapter quirks for limiting write/read transfer size and not
  *		allowing 0 length transfers.
+ * @supports_bus_clear: Bus Clear support to recover from bus hang during
+ *		SDA stuck low from device for some unknown reasons.
  */
 struct tegra_i2c_hw_feature {
 	bool has_continue_xfer_support;
@@ -167,6 +179,7 @@ struct tegra_i2c_hw_feature {
 	bool has_slcg_override_reg;
 	bool has_mst_fifo;
 	const struct i2c_adapter_quirks *quirks;
+	bool supports_bus_clear;
 };
 
 /**
@@ -640,6 +653,13 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
 		goto err;
 	}
 
+	/*
+	 * I2C transfer is terminated during the bus clear so skip
+	 * processing the other interrupts.
+	 */
+	if (i2c_dev->hw->supports_bus_clear && (status & I2C_INT_BUS_CLR_DONE))
+		goto err;
+
 	if (i2c_dev->msg_read && (status & I2C_INT_RX_FIFO_DATA_REQ)) {
 		if (i2c_dev->msg_buf_remaining)
 			tegra_i2c_empty_rx_fifo(i2c_dev);
@@ -668,6 +688,8 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
 	tegra_i2c_mask_irq(i2c_dev, I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST |
 		I2C_INT_PACKET_XFER_COMPLETE | I2C_INT_TX_FIFO_DATA_REQ |
 		I2C_INT_RX_FIFO_DATA_REQ);
+	if (i2c_dev->hw->supports_bus_clear)
+		tegra_i2c_mask_irq(i2c_dev, I2C_INT_BUS_CLR_DONE);
 	i2c_writel(i2c_dev, status, I2C_INT_STATUS);
 	if (i2c_dev->is_dvc)
 		dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS);
@@ -678,6 +700,44 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static int tegra_i2c_issue_bus_clear(struct i2c_adapter *adap)
+{
+	struct tegra_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
+	int err;
+	unsigned long time_left;
+	u32 reg;
+
+	reinit_completion(&i2c_dev->msg_complete);
+	reg = (I2C_BC_SCLK_THRESHOLD << I2C_BC_SCLK_THRESHOLD_SHIFT) |
+	      I2C_BC_STOP_COND | I2C_BC_TERMINATE;
+	i2c_writel(i2c_dev, reg, I2C_BUS_CLEAR_CNFG);
+	if (i2c_dev->hw->has_config_load_reg) {
+		err = tegra_i2c_wait_for_config_load(i2c_dev);
+		if (err)
+			return err;
+	}
+
+	reg |= I2C_BC_ENABLE;
+	i2c_writel(i2c_dev, reg, I2C_BUS_CLEAR_CNFG);
+	tegra_i2c_unmask_irq(i2c_dev, I2C_INT_BUS_CLR_DONE);
+
+	time_left = wait_for_completion_timeout(&i2c_dev->msg_complete,
+						TEGRA_I2C_TIMEOUT);
+	if (time_left == 0) {
+		dev_err(i2c_dev->dev, "timed out for bus clear\n");
+		return -ETIMEDOUT;
+	}
+
+	reg = i2c_readl(i2c_dev, I2C_BUS_CLEAR_STATUS);
+	if (!(reg & I2C_BC_STATUS)) {
+		dev_err(i2c_dev->dev,
+			"un-recovered arbitration lost\n");
+		return -EIO;
+	}
+
+	return -EAGAIN;
+}
+
 static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 	struct i2c_msg *msg, enum msg_end_type end_state)
 {
@@ -759,6 +819,13 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 		return 0;
 
 	tegra_i2c_init(i2c_dev);
+	/* start recovery upon arbitration loss in single master mode */
+	if (i2c_dev->msg_err == I2C_ERR_ARBITRATION_LOST) {
+		if (!i2c_dev->is_multimaster_mode)
+			return i2c_recover_bus(&i2c_dev->adapter);
+		return -EAGAIN;
+	}
+
 	if (i2c_dev->msg_err == I2C_ERR_NO_ACK) {
 		if (msg->flags & I2C_M_IGNORE_NAK)
 			return 0;
@@ -841,6 +908,10 @@ static const struct i2c_adapter_quirks tegra194_i2c_quirks = {
 	.flags = I2C_AQ_NO_ZERO_LEN,
 };
 
+static struct i2c_bus_recovery_info tegra_i2c_recovery_info = {
+	.recover_bus = tegra_i2c_issue_bus_clear,
+};
+
 static const struct tegra_i2c_hw_feature tegra20_i2c_hw = {
 	.has_continue_xfer_support = false,
 	.has_per_pkt_xfer_complete_irq = false,
@@ -853,6 +924,7 @@ static const struct tegra_i2c_hw_feature tegra20_i2c_hw = {
 	.has_slcg_override_reg = false,
 	.has_mst_fifo = false,
 	.quirks = &tegra_i2c_quirks,
+	.supports_bus_clear = false,
 };
 
 static const struct tegra_i2c_hw_feature tegra30_i2c_hw = {
@@ -867,6 +939,7 @@ static const struct tegra_i2c_hw_feature tegra30_i2c_hw = {
 	.has_slcg_override_reg = false,
 	.has_mst_fifo = false,
 	.quirks = &tegra_i2c_quirks,
+	.supports_bus_clear = false,
 };
 
 static const struct tegra_i2c_hw_feature tegra114_i2c_hw = {
@@ -881,6 +954,7 @@ static const struct tegra_i2c_hw_feature tegra114_i2c_hw = {
 	.has_slcg_override_reg = false,
 	.has_mst_fifo = false,
 	.quirks = &tegra_i2c_quirks,
+	.supports_bus_clear = true,
 };
 
 static const struct tegra_i2c_hw_feature tegra124_i2c_hw = {
@@ -895,6 +969,7 @@ static const struct tegra_i2c_hw_feature tegra124_i2c_hw = {
 	.has_slcg_override_reg = true,
 	.has_mst_fifo = false,
 	.quirks = &tegra_i2c_quirks,
+	.supports_bus_clear = true,
 };
 
 static const struct tegra_i2c_hw_feature tegra210_i2c_hw = {
@@ -909,6 +984,7 @@ static const struct tegra_i2c_hw_feature tegra210_i2c_hw = {
 	.has_slcg_override_reg = true,
 	.has_mst_fifo = false,
 	.quirks = &tegra_i2c_quirks,
+	.supports_bus_clear = true,
 };
 
 static const struct tegra_i2c_hw_feature tegra194_i2c_hw = {
@@ -923,6 +999,7 @@ static const struct tegra_i2c_hw_feature tegra194_i2c_hw = {
 	.has_slcg_override_reg = true,
 	.has_mst_fifo = true,
 	.quirks = &tegra194_i2c_quirks,
+	.supports_bus_clear = true,
 };
 
 /* Match table for of_platform binding */
@@ -974,6 +1051,7 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 	i2c_dev->base = base;
 	i2c_dev->div_clk = div_clk;
 	i2c_dev->adapter.algo = &tegra_i2c_algo;
+	i2c_dev->adapter.retries = 1;
 	i2c_dev->irq = irq;
 	i2c_dev->cont_id = pdev->id;
 	i2c_dev->dev = &pdev->dev;
@@ -1051,6 +1129,9 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 		}
 	}
 
+	if (i2c_dev->hw->supports_bus_clear)
+		i2c_dev->adapter.bus_recovery_info = &tegra_i2c_recovery_info;
+
 	ret = tegra_i2c_init(i2c_dev);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to initialize i2c controller\n");
-- 
2.7.4


^ permalink raw reply	[flat|nested] 23+ messages in thread

* [PATCH V19 3/7] i2c: tegra: fix maximum transfer size
  2019-02-12 19:06 [PATCH V19 1/7] i2c: tegra: sort all the include headers alphabetically Sowjanya Komatineni
  2019-02-12 19:06 ` [PATCH V19 2/7] i2c: tegra: add bus clear Master Support Sowjanya Komatineni
@ 2019-02-12 19:06 ` Sowjanya Komatineni
  2019-02-12 19:06 ` [PATCH V19 4/7] i2c: tegra: update " Sowjanya Komatineni
                   ` (5 subsequent siblings)
  7 siblings, 0 replies; 23+ messages in thread
From: Sowjanya Komatineni @ 2019-02-12 19:06 UTC (permalink / raw)
  To: thierry.reding, jonathanh, mkarthik, smohammed, talho, skomatineni
  Cc: wsa, peda, digetx, linux-tegra, linux-kernel, linux-i2c

Tegra186 and prior supports maximum 4K bytes per packet transfer
including 12 bytes of packet header.

This patch fixes max write length limit to account packet header
size for transfers.

Cc: stable@vger.kernel.org # 4.4+

Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
 [V19]	: Splitted maximum transfer limit patch into 2 separate patches to
	  allow this fix for old Tegra chips and next patch in this series for
	  Tegra194.
 [V18] 	: Using Max of SZ_64K (65536) size for dma buffer instead of 65535
 [V16/V17] : I2C core max message size is 65535. So, max_read_len of 65535 is NOP.
	  Removed it leaving max_write_len
 [V15]	: This is new patch in this series.


 drivers/i2c/busses/i2c-tegra.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index a46446dbc48a..036cab795426 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -901,7 +901,7 @@ static const struct i2c_algorithm tegra_i2c_algo = {
 static const struct i2c_adapter_quirks tegra_i2c_quirks = {
 	.flags = I2C_AQ_NO_ZERO_LEN,
 	.max_read_len = 4096,
-	.max_write_len = 4096,
+	.max_write_len = 4096 - 12,
 };
 
 static const struct i2c_adapter_quirks tegra194_i2c_quirks = {
-- 
2.7.4


^ permalink raw reply	[flat|nested] 23+ messages in thread

* [PATCH V19 4/7] i2c: tegra: update maximum transfer size
  2019-02-12 19:06 [PATCH V19 1/7] i2c: tegra: sort all the include headers alphabetically Sowjanya Komatineni
  2019-02-12 19:06 ` [PATCH V19 2/7] i2c: tegra: add bus clear Master Support Sowjanya Komatineni
  2019-02-12 19:06 ` [PATCH V19 3/7] i2c: tegra: fix maximum transfer size Sowjanya Komatineni
@ 2019-02-12 19:06 ` Sowjanya Komatineni
  2019-02-12 19:06 ` [PATCH V19 5/7] i2c: tegra: Add DMA support Sowjanya Komatineni
                   ` (4 subsequent siblings)
  7 siblings, 0 replies; 23+ messages in thread
From: Sowjanya Komatineni @ 2019-02-12 19:06 UTC (permalink / raw)
  To: thierry.reding, jonathanh, mkarthik, smohammed, talho, skomatineni
  Cc: wsa, peda, digetx, linux-tegra, linux-kernel, linux-i2c

Tegra194 supports maximum 64K bytes per packet including 12 bytes of
packet header irrespective of PIO or DMA mode transfer.

This patch updates Tegra194 max write length to account for packet
header size for transfers.

Cc: stable@vger.kernel.org # 4.20+

Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
 [V19]	: Splitted maximum transfer limit patch into 2 separate patches to
	  allow the fix to be applied for old Tegra chips and for Tegra194.
 [V18] 	: Using Max of SZ_64K (65536) size for dma buffer instead of 65535
 [V16/V17] : I2C core max message size is 65535. So, max_read_len of 65535 is NOP.
	  Removed it leaving max_write_len
 [V15]	: This is new patch in this series.

 drivers/i2c/busses/i2c-tegra.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 036cab795426..f8265bd5d02c 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -125,6 +125,9 @@
 #define I2C_MST_FIFO_STATUS_TX_MASK		0xff0000
 #define I2C_MST_FIFO_STATUS_TX_SHIFT		16
 
+/* Packet header size in bytes */
+#define I2C_PACKET_HEADER_SIZE			12
+
 /*
  * msg_end_type: The bus control which need to be send at end of transfer.
  * @MSG_END_STOP: Send stop pulse at end of transfer.
@@ -900,12 +903,13 @@ static const struct i2c_algorithm tegra_i2c_algo = {
 /* payload size is only 12 bit */
 static const struct i2c_adapter_quirks tegra_i2c_quirks = {
 	.flags = I2C_AQ_NO_ZERO_LEN,
-	.max_read_len = 4096,
-	.max_write_len = 4096 - 12,
+	.max_read_len = SZ_4K,
+	.max_write_len = SZ_4K - I2C_PACKET_HEADER_SIZE,
 };
 
 static const struct i2c_adapter_quirks tegra194_i2c_quirks = {
 	.flags = I2C_AQ_NO_ZERO_LEN,
+	.max_write_len = SZ_64K - I2C_PACKET_HEADER_SIZE,
 };
 
 static struct i2c_bus_recovery_info tegra_i2c_recovery_info = {
-- 
2.7.4


^ permalink raw reply	[flat|nested] 23+ messages in thread

* [PATCH V19 5/7] i2c: tegra: Add DMA support
  2019-02-12 19:06 [PATCH V19 1/7] i2c: tegra: sort all the include headers alphabetically Sowjanya Komatineni
                   ` (2 preceding siblings ...)
  2019-02-12 19:06 ` [PATCH V19 4/7] i2c: tegra: update " Sowjanya Komatineni
@ 2019-02-12 19:06 ` Sowjanya Komatineni
  2019-02-14 16:53   ` Wolfram Sang
  2019-02-20 18:02   ` Jon Hunter
  2019-02-12 19:06 ` [PATCH V19 6/7] i2c: tegra: update transfer timeout Sowjanya Komatineni
                   ` (3 subsequent siblings)
  7 siblings, 2 replies; 23+ messages in thread
From: Sowjanya Komatineni @ 2019-02-12 19:06 UTC (permalink / raw)
  To: thierry.reding, jonathanh, mkarthik, smohammed, talho, skomatineni
  Cc: wsa, peda, digetx, linux-tegra, linux-kernel, linux-i2c

This patch adds DMA support for Tegra I2C.

Tegra I2C TX and RX FIFO depth is 8 words. PIO mode is used for
transfer size of the max FIFO depth and DMA mode is used for
transfer size higher than max FIFO depth to save CPU overhead.

PIO mode needs full intervention of CPU to fill or empty FIFO's
and also need to service multiple data requests interrupt for the
same transaction. This adds delay between data bytes of the same
transfer when CPU is fully loaded and some slave devices has
internal timeout for no bus activity and stops transaction to
avoid bus hang. DMA mode is helpful in such cases.

DMA mode is also helpful for Large transfers during downloading or
uploading FW over I2C to some external devices.

Tegra210 and prior Tegra chips use APBDMA driver which is replaced
with GPCDMA on Tegra186 and Tegra194.
This patch uses has_apb_dma flag in hw_feature to differentiate
DMA driver change between Tegra chipset.

APBDMA driver is registered from module-init level and this patch
also has a change to register I2C driver at module-init level
rather than subsys-init to avoid deferring I2C probe till APBDMA
driver is registered.

Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
 [V19] : Updated Commit Message to include details of APBDMA flag and also
	 reason for registering i2c driver at module-init level
 [V18] : No Change
 [V17] : Fix dma buffer size to use based on max write length
 [V16] : Minor changes (proper label names)
 [V15] : Moved Tegra186 hw feature structure from interface timing patch to this DMA
	 patch in V15 patch series.
	 releasing dma resource on probe failure and minor code cleanup.
 [V14] : Switched back to use dma_alloc_coherent as it guarentees contiguous device
	 dma address space.
	 Fixed FIFO Trigger level programming to construct value from scratch.
	 Previous versions does register read-modify-write without masking.
	 T20 has DVC offsets different to I2C. This version has fix to account DVC
	 offset during dma slave configuration.
 [V13] : T20 has DVC used for some power controls. This version has fix for using
	 proper DVC register offsets for DMA programming incase when used in DMA
	 mode.
 [V12] : Replaced dma_alloc_coherent with dma_alloc_attrs to force the allocated
	 buffer to be contiguous also in physical memory as Tegra194 supports max
	 64K and dma_alloc_coherent doesnt guarentee contiguous memory.
	 Changed return code from EIO to EINVAL incase of failure to obtain dma
	 descriptor.
	 Fixed coding style check issues.	 
 [V11] : Replaced deprecated dmaengine_terminate_all with dmaengine_termine_async
	 from non-atomic context and dmaengine_terminate_sync from atomic context.
	 Fixed to program fifo trigger levels properly when transfer falls back to
	 pio mode in case of dma slave configuration failure and other minor fixes.
 [V10] : APBDMA is replaced with GPCDMA on Tegra186 and Tegra194 designs.
	 Added apbdma hw support flag to now allow Tegra186 and later use
	 APBDMA driver.
	 Added explicit flow control enable for DMA slave config and error handling.
	 Moved releasing DMA resources to seperate function to reuse in
	 multiple places.
	 Updated to register tegra_i2c_driver from module level rather than subsys
	 level.
	 Other minor feedback
 [V9] :  Rebased to 5.0-rc4
	 Removed dependency of APB DMA in Kconfig and added conditional check
 	 in I2C driver to decide on using DMA mode.
	 Changed back the allocation of dma buffer during i2c probe.
	 Fixed FIFO triggers depending on DMA Vs PIO.
 [V8] :  Moved back dma init to i2c probe, removed ALL_PACKETS_XFER_COMPLETE
	 interrupt and using PACKETS_XFER_COMPLETE interrupt only and some
	 other fixes
	 Updated Kconfig for APB_DMA dependency
 [V7] :  Same as V6
 [V6] :  Updated for proper buffer allocation/freeing, channel release.
	 Updated to use exact xfer size for syncing dma buffer.
 [V5] :  Same as V4
 [V4] :  Updated to allocate DMA buffer only when DMA mode.
	 Updated to fall back to PIO mode when DMA channel request or
	 buffer allocation fails.
 [V3] :  Updated without additional buffer allocation.
 [V2] :  Updated based on V1 review feedback along with code cleanup for
	 proper implementation of DMA.


 drivers/i2c/busses/i2c-tegra.c | 432 ++++++++++++++++++++++++++++++++++++-----
 1 file changed, 383 insertions(+), 49 deletions(-)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index f8265bd5d02c..3b923411c9a7 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -8,6 +8,8 @@
 
 #include <linux/clk.h>
 #include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
 #include <linux/err.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
@@ -42,8 +44,8 @@
 #define I2C_FIFO_CONTROL			0x05c
 #define I2C_FIFO_CONTROL_TX_FLUSH		BIT(1)
 #define I2C_FIFO_CONTROL_RX_FLUSH		BIT(0)
-#define I2C_FIFO_CONTROL_TX_TRIG_SHIFT		5
-#define I2C_FIFO_CONTROL_RX_TRIG_SHIFT		2
+#define I2C_FIFO_CONTROL_TX_TRIG(x)		(((x) - 1) << 5)
+#define I2C_FIFO_CONTROL_RX_TRIG(x)		(((x) - 1) << 2)
 #define I2C_FIFO_STATUS				0x060
 #define I2C_FIFO_STATUS_TX_MASK			0xF0
 #define I2C_FIFO_STATUS_TX_SHIFT		4
@@ -129,6 +131,13 @@
 #define I2C_PACKET_HEADER_SIZE			12
 
 /*
+ * Upto I2C_PIO_MODE_MAX_LEN bytes, controller will use PIO mode,
+ * above this, controller will use DMA to fill FIFO.
+ * MAX PIO len is 20 bytes excluding packet header.
+ */
+#define I2C_PIO_MODE_MAX_LEN			32
+
+/*
  * msg_end_type: The bus control which need to be send at end of transfer.
  * @MSG_END_STOP: Send stop pulse at end of transfer.
  * @MSG_END_REPEAT_START: Send repeat start at end of transfer.
@@ -169,6 +178,7 @@ enum msg_end_type {
  *		allowing 0 length transfers.
  * @supports_bus_clear: Bus Clear support to recover from bus hang during
  *		SDA stuck low from device for some unknown reasons.
+ * @has_apb_dma: Support of APBDMA on corresponding Tegra chip.
  */
 struct tegra_i2c_hw_feature {
 	bool has_continue_xfer_support;
@@ -183,6 +193,7 @@ struct tegra_i2c_hw_feature {
 	bool has_mst_fifo;
 	const struct i2c_adapter_quirks *quirks;
 	bool supports_bus_clear;
+	bool has_apb_dma;
 };
 
 /**
@@ -194,6 +205,7 @@ struct tegra_i2c_hw_feature {
  * @fast_clk: clock reference for fast clock of I2C controller
  * @rst: reset control for the I2C controller
  * @base: ioremapped registers cookie
+ * @base_phys: physical base address of the I2C controller
  * @cont_id: I2C controller ID, used for packet header
  * @irq: IRQ number of transfer complete interrupt
  * @irq_disabled: used to track whether or not the interrupt is enabled
@@ -207,6 +219,13 @@ struct tegra_i2c_hw_feature {
  * @clk_divisor_non_hs_mode: clock divider for non-high-speed modes
  * @is_multimaster_mode: track if I2C controller is in multi-master mode
  * @xfer_lock: lock to serialize transfer submission and processing
+ * @tx_dma_chan: DMA transmit channel
+ * @rx_dma_chan: DMA receive channel
+ * @dma_phys: handle to DMA resources
+ * @dma_buf: pointer to allocated DMA buffer
+ * @dma_buf_size: DMA buffer size
+ * @is_curr_dma_xfer: indicates active DMA transfer
+ * @dma_complete: DMA completion notifier
  */
 struct tegra_i2c_dev {
 	struct device *dev;
@@ -216,6 +235,7 @@ struct tegra_i2c_dev {
 	struct clk *fast_clk;
 	struct reset_control *rst;
 	void __iomem *base;
+	phys_addr_t base_phys;
 	int cont_id;
 	int irq;
 	bool irq_disabled;
@@ -229,6 +249,13 @@ struct tegra_i2c_dev {
 	u16 clk_divisor_non_hs_mode;
 	bool is_multimaster_mode;
 	spinlock_t xfer_lock;
+	struct dma_chan *tx_dma_chan;
+	struct dma_chan *rx_dma_chan;
+	dma_addr_t dma_phys;
+	u32 *dma_buf;
+	unsigned int dma_buf_size;
+	bool is_curr_dma_xfer;
+	struct completion dma_complete;
 };
 
 static void dvc_writel(struct tegra_i2c_dev *i2c_dev, u32 val,
@@ -297,6 +324,109 @@ static void tegra_i2c_unmask_irq(struct tegra_i2c_dev *i2c_dev, u32 mask)
 	i2c_writel(i2c_dev, int_mask, I2C_INT_MASK);
 }
 
+static void tegra_i2c_dma_complete(void *args)
+{
+	struct tegra_i2c_dev *i2c_dev = args;
+
+	complete(&i2c_dev->dma_complete);
+}
+
+static int tegra_i2c_dma_submit(struct tegra_i2c_dev *i2c_dev, size_t len)
+{
+	struct dma_async_tx_descriptor *dma_desc;
+	enum dma_transfer_direction dir;
+	struct dma_chan *chan;
+
+	dev_dbg(i2c_dev->dev, "starting DMA for length: %zu\n", len);
+	reinit_completion(&i2c_dev->dma_complete);
+	dir = i2c_dev->msg_read ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV;
+	chan = i2c_dev->msg_read ? i2c_dev->rx_dma_chan : i2c_dev->tx_dma_chan;
+	dma_desc = dmaengine_prep_slave_single(chan, i2c_dev->dma_phys,
+					       len, dir, DMA_PREP_INTERRUPT |
+					       DMA_CTRL_ACK);
+	if (!dma_desc) {
+		dev_err(i2c_dev->dev, "failed to get DMA descriptor\n");
+		return -EINVAL;
+	}
+
+	dma_desc->callback = tegra_i2c_dma_complete;
+	dma_desc->callback_param = i2c_dev;
+	dmaengine_submit(dma_desc);
+	dma_async_issue_pending(chan);
+	return 0;
+}
+
+static void tegra_i2c_release_dma(struct tegra_i2c_dev *i2c_dev)
+{
+	if (i2c_dev->dma_buf) {
+		dma_free_coherent(i2c_dev->dev, i2c_dev->dma_buf_size,
+				  i2c_dev->dma_buf, i2c_dev->dma_phys);
+		i2c_dev->dma_buf = NULL;
+	}
+
+	if (i2c_dev->tx_dma_chan) {
+		dma_release_channel(i2c_dev->tx_dma_chan);
+		i2c_dev->tx_dma_chan = NULL;
+	}
+
+	if (i2c_dev->rx_dma_chan) {
+		dma_release_channel(i2c_dev->rx_dma_chan);
+		i2c_dev->rx_dma_chan = NULL;
+	}
+}
+
+static int tegra_i2c_init_dma(struct tegra_i2c_dev *i2c_dev)
+{
+	struct dma_chan *chan;
+	u32 *dma_buf;
+	dma_addr_t dma_phys;
+	int err;
+
+	if (!IS_ENABLED(CONFIG_TEGRA20_APB_DMA) ||
+	    !i2c_dev->hw->has_apb_dma) {
+		err = -ENODEV;
+		goto err_out;
+	}
+
+	chan = dma_request_slave_channel_reason(i2c_dev->dev, "rx");
+	if (IS_ERR(chan)) {
+		err = PTR_ERR(chan);
+		goto err_out;
+	}
+
+	i2c_dev->rx_dma_chan = chan;
+
+	chan = dma_request_slave_channel_reason(i2c_dev->dev, "tx");
+	if (IS_ERR(chan)) {
+		err = PTR_ERR(chan);
+		goto err_out;
+	}
+
+	i2c_dev->tx_dma_chan = chan;
+
+	dma_buf = dma_alloc_coherent(i2c_dev->dev, i2c_dev->dma_buf_size,
+				     &dma_phys, GFP_KERNEL | __GFP_NOWARN);
+	if (!dma_buf) {
+		dev_err(i2c_dev->dev, "failed to allocate the DMA buffer\n");
+		err = -ENOMEM;
+		goto err_out;
+	}
+
+	i2c_dev->dma_buf = dma_buf;
+	i2c_dev->dma_phys = dma_phys;
+	return 0;
+
+err_out:
+	tegra_i2c_release_dma(i2c_dev);
+	if (err != -EPROBE_DEFER) {
+		dev_err(i2c_dev->dev, "cannot use DMA: %d\n", err);
+		dev_err(i2c_dev->dev, "fallbacking to PIO\n");
+		return 0;
+	}
+
+	return err;
+}
+
 static int tegra_i2c_flush_fifos(struct tegra_i2c_dev *i2c_dev)
 {
 	unsigned long timeout = jiffies + HZ;
@@ -574,16 +704,6 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
 		i2c_writel(i2c_dev, 0x00, I2C_SL_ADDR2);
 	}
 
-	if (i2c_dev->hw->has_mst_fifo) {
-		val = I2C_MST_FIFO_CONTROL_TX_TRIG(8) |
-		      I2C_MST_FIFO_CONTROL_RX_TRIG(1);
-		i2c_writel(i2c_dev, val, I2C_MST_FIFO_CONTROL);
-	} else {
-		val = 7 << I2C_FIFO_CONTROL_TX_TRIG_SHIFT |
-			0 << I2C_FIFO_CONTROL_RX_TRIG_SHIFT;
-		i2c_writel(i2c_dev, val, I2C_FIFO_CONTROL);
-	}
-
 	err = tegra_i2c_flush_fifos(i2c_dev);
 	if (err)
 		goto err;
@@ -663,25 +783,37 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
 	if (i2c_dev->hw->supports_bus_clear && (status & I2C_INT_BUS_CLR_DONE))
 		goto err;
 
-	if (i2c_dev->msg_read && (status & I2C_INT_RX_FIFO_DATA_REQ)) {
-		if (i2c_dev->msg_buf_remaining)
-			tegra_i2c_empty_rx_fifo(i2c_dev);
-		else
-			BUG();
-	}
+	if (!i2c_dev->is_curr_dma_xfer) {
+		if (i2c_dev->msg_read && (status & I2C_INT_RX_FIFO_DATA_REQ)) {
+			if (i2c_dev->msg_buf_remaining)
+				tegra_i2c_empty_rx_fifo(i2c_dev);
+			else
+				BUG();
+		}
 
-	if (!i2c_dev->msg_read && (status & I2C_INT_TX_FIFO_DATA_REQ)) {
-		if (i2c_dev->msg_buf_remaining)
-			tegra_i2c_fill_tx_fifo(i2c_dev);
-		else
-			tegra_i2c_mask_irq(i2c_dev, I2C_INT_TX_FIFO_DATA_REQ);
+		if (!i2c_dev->msg_read && (status & I2C_INT_TX_FIFO_DATA_REQ)) {
+			if (i2c_dev->msg_buf_remaining)
+				tegra_i2c_fill_tx_fifo(i2c_dev);
+			else
+				tegra_i2c_mask_irq(i2c_dev,
+						   I2C_INT_TX_FIFO_DATA_REQ);
+		}
 	}
 
 	i2c_writel(i2c_dev, status, I2C_INT_STATUS);
 	if (i2c_dev->is_dvc)
 		dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS);
 
+	/*
+	 * During message read XFER_COMPLETE interrupt is triggered prior to
+	 * DMA completion and during message write XFER_COMPLETE interrupt is
+	 * triggered after DMA completion.
+	 * PACKETS_XFER_COMPLETE indicates completion of all bytes of transfer.
+	 * so forcing msg_buf_remaining to 0 in DMA mode.
+	 */
 	if (status & I2C_INT_PACKET_XFER_COMPLETE) {
+		if (i2c_dev->is_curr_dma_xfer)
+			i2c_dev->msg_buf_remaining = 0;
 		BUG_ON(i2c_dev->msg_buf_remaining);
 		complete(&i2c_dev->msg_complete);
 	}
@@ -697,12 +829,91 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
 	if (i2c_dev->is_dvc)
 		dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS);
 
+	if (i2c_dev->is_curr_dma_xfer) {
+		if (i2c_dev->msg_read)
+			dmaengine_terminate_async(i2c_dev->rx_dma_chan);
+		else
+			dmaengine_terminate_async(i2c_dev->tx_dma_chan);
+
+		complete(&i2c_dev->dma_complete);
+	}
+
 	complete(&i2c_dev->msg_complete);
 done:
 	spin_unlock(&i2c_dev->xfer_lock);
 	return IRQ_HANDLED;
 }
 
+static void tegra_i2c_config_fifo_trig(struct tegra_i2c_dev *i2c_dev,
+				       size_t len)
+{
+	u32 val, reg;
+	u8 dma_burst;
+	struct dma_slave_config slv_config = {0};
+	struct dma_chan *chan;
+	int ret;
+	unsigned long reg_offset;
+
+	if (i2c_dev->hw->has_mst_fifo)
+		reg = I2C_MST_FIFO_CONTROL;
+	else
+		reg = I2C_FIFO_CONTROL;
+
+	if (i2c_dev->is_curr_dma_xfer) {
+		if (len & 0xF)
+			dma_burst = 1;
+		else if (len & 0x10)
+			dma_burst = 4;
+		else
+			dma_burst = 8;
+
+		if (i2c_dev->msg_read) {
+			chan = i2c_dev->rx_dma_chan;
+			reg_offset = tegra_i2c_reg_addr(i2c_dev, I2C_RX_FIFO);
+			slv_config.src_addr = i2c_dev->base_phys + reg_offset;
+			slv_config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+			slv_config.src_maxburst = dma_burst;
+
+			if (i2c_dev->hw->has_mst_fifo)
+				val = I2C_MST_FIFO_CONTROL_RX_TRIG(dma_burst);
+			else
+				val = I2C_FIFO_CONTROL_RX_TRIG(dma_burst);
+		} else {
+			chan = i2c_dev->tx_dma_chan;
+			reg_offset = tegra_i2c_reg_addr(i2c_dev, I2C_TX_FIFO);
+			slv_config.dst_addr = i2c_dev->base_phys + reg_offset;
+			slv_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+			slv_config.dst_maxburst = dma_burst;
+
+			if (i2c_dev->hw->has_mst_fifo)
+				val = I2C_MST_FIFO_CONTROL_TX_TRIG(dma_burst);
+			else
+				val = I2C_FIFO_CONTROL_TX_TRIG(dma_burst);
+		}
+
+		slv_config.device_fc = true;
+		ret = dmaengine_slave_config(chan, &slv_config);
+		if (ret < 0) {
+			dev_err(i2c_dev->dev, "DMA slave config failed: %d\n",
+				ret);
+			dev_err(i2c_dev->dev, "fallbacking to PIO\n");
+			tegra_i2c_release_dma(i2c_dev);
+			i2c_dev->is_curr_dma_xfer = false;
+		} else {
+			goto out;
+		}
+	}
+
+	if (i2c_dev->hw->has_mst_fifo)
+		val = I2C_MST_FIFO_CONTROL_TX_TRIG(8) |
+		      I2C_MST_FIFO_CONTROL_RX_TRIG(1);
+	else
+		val = I2C_FIFO_CONTROL_TX_TRIG(8) |
+		      I2C_FIFO_CONTROL_RX_TRIG(1);
+out:
+	i2c_writel(i2c_dev, val, reg);
+}
+
 static int tegra_i2c_issue_bus_clear(struct i2c_adapter *adap)
 {
 	struct tegra_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
@@ -748,6 +959,10 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 	u32 int_mask;
 	unsigned long time_left;
 	unsigned long flags;
+	size_t xfer_size;
+	u32 *buffer = NULL;
+	int err = 0;
+	bool dma;
 
 	tegra_i2c_flush_fifos(i2c_dev);
 
@@ -757,19 +972,57 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 	i2c_dev->msg_read = (msg->flags & I2C_M_RD);
 	reinit_completion(&i2c_dev->msg_complete);
 
+	if (i2c_dev->msg_read)
+		xfer_size = msg->len;
+	else
+		xfer_size = msg->len + I2C_PACKET_HEADER_SIZE;
+
+	xfer_size = ALIGN(xfer_size, BYTES_PER_FIFO_WORD);
+	i2c_dev->is_curr_dma_xfer = (xfer_size > I2C_PIO_MODE_MAX_LEN) &&
+				    i2c_dev->dma_buf;
+	tegra_i2c_config_fifo_trig(i2c_dev, xfer_size);
+	dma = i2c_dev->is_curr_dma_xfer;
 	spin_lock_irqsave(&i2c_dev->xfer_lock, flags);
 
 	int_mask = I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST;
 	tegra_i2c_unmask_irq(i2c_dev, int_mask);
+	if (dma) {
+		if (i2c_dev->msg_read) {
+			dma_sync_single_for_device(i2c_dev->dev,
+						   i2c_dev->dma_phys,
+						   xfer_size,
+						   DMA_FROM_DEVICE);
+			err = tegra_i2c_dma_submit(i2c_dev, xfer_size);
+			if (err < 0) {
+				dev_err(i2c_dev->dev,
+					"starting RX DMA failed, err %d\n",
+					err);
+				goto unlock;
+			}
+
+		} else {
+			dma_sync_single_for_cpu(i2c_dev->dev,
+						i2c_dev->dma_phys,
+						xfer_size,
+						DMA_TO_DEVICE);
+			buffer = i2c_dev->dma_buf;
+		}
+	}
 
 	packet_header = (0 << PACKET_HEADER0_HEADER_SIZE_SHIFT) |
 			PACKET_HEADER0_PROTOCOL_I2C |
 			(i2c_dev->cont_id << PACKET_HEADER0_CONT_ID_SHIFT) |
 			(1 << PACKET_HEADER0_PACKET_ID_SHIFT);
-	i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
+	if (dma && !i2c_dev->msg_read)
+		*buffer++ = packet_header;
+	else
+		i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
 
 	packet_header = msg->len - 1;
-	i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
+	if (dma && !i2c_dev->msg_read)
+		*buffer++ = packet_header;
+	else
+		i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
 
 	packet_header = I2C_HEADER_IE_ENABLE;
 	if (end_state == MSG_END_CONTINUE)
@@ -786,23 +1039,77 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 		packet_header |= I2C_HEADER_CONT_ON_NAK;
 	if (msg->flags & I2C_M_RD)
 		packet_header |= I2C_HEADER_READ;
-	i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
-
-	if (!(msg->flags & I2C_M_RD))
-		tegra_i2c_fill_tx_fifo(i2c_dev);
+	if (dma && !i2c_dev->msg_read)
+		*buffer++ = packet_header;
+	else
+		i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
+
+	if (!i2c_dev->msg_read) {
+		if (dma) {
+			memcpy(buffer, msg->buf, msg->len);
+			dma_sync_single_for_device(i2c_dev->dev,
+						   i2c_dev->dma_phys,
+						   xfer_size,
+						   DMA_TO_DEVICE);
+			err = tegra_i2c_dma_submit(i2c_dev, xfer_size);
+			if (err < 0) {
+				dev_err(i2c_dev->dev,
+					"starting TX DMA failed, err %d\n",
+					err);
+				goto unlock;
+			}
+		} else {
+			tegra_i2c_fill_tx_fifo(i2c_dev);
+		}
+	}
 
 	if (i2c_dev->hw->has_per_pkt_xfer_complete_irq)
 		int_mask |= I2C_INT_PACKET_XFER_COMPLETE;
-	if (msg->flags & I2C_M_RD)
-		int_mask |= I2C_INT_RX_FIFO_DATA_REQ;
-	else if (i2c_dev->msg_buf_remaining)
-		int_mask |= I2C_INT_TX_FIFO_DATA_REQ;
+	if (!dma) {
+		if (msg->flags & I2C_M_RD)
+			int_mask |= I2C_INT_RX_FIFO_DATA_REQ;
+		else if (i2c_dev->msg_buf_remaining)
+			int_mask |= I2C_INT_TX_FIFO_DATA_REQ;
+	}
 
 	tegra_i2c_unmask_irq(i2c_dev, int_mask);
-	spin_unlock_irqrestore(&i2c_dev->xfer_lock, flags);
 	dev_dbg(i2c_dev->dev, "unmasked irq: %02x\n",
 		i2c_readl(i2c_dev, I2C_INT_MASK));
 
+unlock:
+	spin_unlock_irqrestore(&i2c_dev->xfer_lock, flags);
+
+	if (dma) {
+		if (err)
+			return err;
+
+		time_left = wait_for_completion_timeout(
+						&i2c_dev->dma_complete,
+						TEGRA_I2C_TIMEOUT);
+		if (time_left == 0) {
+			dev_err(i2c_dev->dev, "DMA transfer timeout\n");
+			dmaengine_terminate_sync(i2c_dev->msg_read ?
+						 i2c_dev->rx_dma_chan :
+						 i2c_dev->tx_dma_chan);
+			tegra_i2c_init(i2c_dev);
+			return -ETIMEDOUT;
+		}
+
+		if (i2c_dev->msg_read && i2c_dev->msg_err == I2C_ERR_NONE) {
+			dma_sync_single_for_cpu(i2c_dev->dev,
+						i2c_dev->dma_phys,
+						xfer_size,
+						DMA_FROM_DEVICE);
+			memcpy(i2c_dev->msg_buf, i2c_dev->dma_buf,
+			       msg->len);
+		}
+
+		if (i2c_dev->msg_err != I2C_ERR_NONE)
+			dmaengine_synchronize(i2c_dev->msg_read ?
+					      i2c_dev->rx_dma_chan :
+					      i2c_dev->tx_dma_chan);
+	}
+
 	time_left = wait_for_completion_timeout(&i2c_dev->msg_complete,
 						TEGRA_I2C_TIMEOUT);
 	tegra_i2c_mask_irq(i2c_dev, int_mask);
@@ -818,6 +1125,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 		time_left, completion_done(&i2c_dev->msg_complete),
 		i2c_dev->msg_err);
 
+	i2c_dev->is_curr_dma_xfer = false;
 	if (likely(i2c_dev->msg_err == I2C_ERR_NONE))
 		return 0;
 
@@ -929,6 +1237,7 @@ static const struct tegra_i2c_hw_feature tegra20_i2c_hw = {
 	.has_mst_fifo = false,
 	.quirks = &tegra_i2c_quirks,
 	.supports_bus_clear = false,
+	.has_apb_dma = true,
 };
 
 static const struct tegra_i2c_hw_feature tegra30_i2c_hw = {
@@ -944,6 +1253,7 @@ static const struct tegra_i2c_hw_feature tegra30_i2c_hw = {
 	.has_mst_fifo = false,
 	.quirks = &tegra_i2c_quirks,
 	.supports_bus_clear = false,
+	.has_apb_dma = true,
 };
 
 static const struct tegra_i2c_hw_feature tegra114_i2c_hw = {
@@ -959,6 +1269,7 @@ static const struct tegra_i2c_hw_feature tegra114_i2c_hw = {
 	.has_mst_fifo = false,
 	.quirks = &tegra_i2c_quirks,
 	.supports_bus_clear = true,
+	.has_apb_dma = true,
 };
 
 static const struct tegra_i2c_hw_feature tegra124_i2c_hw = {
@@ -974,6 +1285,7 @@ static const struct tegra_i2c_hw_feature tegra124_i2c_hw = {
 	.has_mst_fifo = false,
 	.quirks = &tegra_i2c_quirks,
 	.supports_bus_clear = true,
+	.has_apb_dma = true,
 };
 
 static const struct tegra_i2c_hw_feature tegra210_i2c_hw = {
@@ -989,6 +1301,23 @@ static const struct tegra_i2c_hw_feature tegra210_i2c_hw = {
 	.has_mst_fifo = false,
 	.quirks = &tegra_i2c_quirks,
 	.supports_bus_clear = true,
+	.has_apb_dma = true,
+};
+
+static const struct tegra_i2c_hw_feature tegra186_i2c_hw = {
+	.has_continue_xfer_support = true,
+	.has_per_pkt_xfer_complete_irq = true,
+	.has_single_clk_source = true,
+	.clk_divisor_hs_mode = 1,
+	.clk_divisor_std_fast_mode = 0x19,
+	.clk_divisor_fast_plus_mode = 0x10,
+	.has_config_load_reg = true,
+	.has_multi_master_mode = true,
+	.has_slcg_override_reg = true,
+	.has_mst_fifo = true,
+	.quirks = &tegra_i2c_quirks,
+	.supports_bus_clear = true,
+	.has_apb_dma = false,
 };
 
 static const struct tegra_i2c_hw_feature tegra194_i2c_hw = {
@@ -1004,11 +1333,13 @@ static const struct tegra_i2c_hw_feature tegra194_i2c_hw = {
 	.has_mst_fifo = true,
 	.quirks = &tegra194_i2c_quirks,
 	.supports_bus_clear = true,
+	.has_apb_dma = false,
 };
 
 /* Match table for of_platform binding */
 static const struct of_device_id tegra_i2c_of_match[] = {
 	{ .compatible = "nvidia,tegra194-i2c", .data = &tegra194_i2c_hw, },
+	{ .compatible = "nvidia,tegra186-i2c", .data = &tegra186_i2c_hw, },
 	{ .compatible = "nvidia,tegra210-i2c", .data = &tegra210_i2c_hw, },
 	{ .compatible = "nvidia,tegra124-i2c", .data = &tegra124_i2c_hw, },
 	{ .compatible = "nvidia,tegra114-i2c", .data = &tegra114_i2c_hw, },
@@ -1026,11 +1357,13 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 	struct clk *div_clk;
 	struct clk *fast_clk;
 	void __iomem *base;
+	phys_addr_t base_phys;
 	int irq;
 	int ret = 0;
 	int clk_multiplier = I2C_CLK_MULTIPLIER_STD_FAST_MODE;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base_phys = res->start;
 	base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(base))
 		return PTR_ERR(base);
@@ -1053,6 +1386,7 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	i2c_dev->base = base;
+	i2c_dev->base_phys = base_phys;
 	i2c_dev->div_clk = div_clk;
 	i2c_dev->adapter.algo = &tegra_i2c_algo;
 	i2c_dev->adapter.retries = 1;
@@ -1072,7 +1406,10 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 	i2c_dev->is_dvc = of_device_is_compatible(pdev->dev.of_node,
 						  "nvidia,tegra20-i2c-dvc");
 	i2c_dev->adapter.quirks = i2c_dev->hw->quirks;
+	i2c_dev->dma_buf_size = i2c_dev->adapter.quirks->max_write_len +
+				I2C_PACKET_HEADER_SIZE;
 	init_completion(&i2c_dev->msg_complete);
+	init_completion(&i2c_dev->dma_complete);
 	spin_lock_init(&i2c_dev->xfer_lock);
 
 	if (!i2c_dev->hw->has_single_clk_source) {
@@ -1136,17 +1473,21 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 	if (i2c_dev->hw->supports_bus_clear)
 		i2c_dev->adapter.bus_recovery_info = &tegra_i2c_recovery_info;
 
+	ret = tegra_i2c_init_dma(i2c_dev);
+	if (ret < 0)
+		goto disable_div_clk;
+
 	ret = tegra_i2c_init(i2c_dev);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to initialize i2c controller\n");
-		goto disable_div_clk;
+		goto release_dma;
 	}
 
 	ret = devm_request_irq(&pdev->dev, i2c_dev->irq,
 			tegra_i2c_isr, 0, dev_name(&pdev->dev), i2c_dev);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to request irq %i\n", i2c_dev->irq);
-		goto disable_div_clk;
+		goto release_dma;
 	}
 
 	i2c_set_adapdata(&i2c_dev->adapter, i2c_dev);
@@ -1160,10 +1501,13 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 
 	ret = i2c_add_numbered_adapter(&i2c_dev->adapter);
 	if (ret)
-		goto disable_div_clk;
+		goto release_dma;
 
 	return 0;
 
+release_dma:
+	tegra_i2c_release_dma(i2c_dev);
+
 disable_div_clk:
 	if (i2c_dev->is_multimaster_mode)
 		clk_disable(i2c_dev->div_clk);
@@ -1200,6 +1544,7 @@ static int tegra_i2c_remove(struct platform_device *pdev)
 	if (!i2c_dev->hw->has_single_clk_source)
 		clk_unprepare(i2c_dev->fast_clk);
 
+	tegra_i2c_release_dma(i2c_dev);
 	return 0;
 }
 
@@ -1223,18 +1568,7 @@ static struct platform_driver tegra_i2c_driver = {
 	},
 };
 
-static int __init tegra_i2c_init_driver(void)
-{
-	return platform_driver_register(&tegra_i2c_driver);
-}
-
-static void __exit tegra_i2c_exit_driver(void)
-{
-	platform_driver_unregister(&tegra_i2c_driver);
-}
-
-subsys_initcall(tegra_i2c_init_driver);
-module_exit(tegra_i2c_exit_driver);
+module_platform_driver(tegra_i2c_driver);
 
 MODULE_DESCRIPTION("nVidia Tegra2 I2C Bus Controller driver");
 MODULE_AUTHOR("Colin Cross");
-- 
2.7.4


^ permalink raw reply	[flat|nested] 23+ messages in thread

* [PATCH V19 6/7] i2c: tegra: update transfer timeout
  2019-02-12 19:06 [PATCH V19 1/7] i2c: tegra: sort all the include headers alphabetically Sowjanya Komatineni
                   ` (3 preceding siblings ...)
  2019-02-12 19:06 ` [PATCH V19 5/7] i2c: tegra: Add DMA support Sowjanya Komatineni
@ 2019-02-12 19:06 ` Sowjanya Komatineni
  2019-02-12 19:06 ` [PATCH V19 7/7] i2c: tegra: add i2c interface timing support Sowjanya Komatineni
                   ` (2 subsequent siblings)
  7 siblings, 0 replies; 23+ messages in thread
From: Sowjanya Komatineni @ 2019-02-12 19:06 UTC (permalink / raw)
  To: thierry.reding, jonathanh, mkarthik, smohammed, talho, skomatineni
  Cc: wsa, peda, digetx, linux-tegra, linux-kernel, linux-i2c

Tegra194 allows max of 64K bytes and Tegra186 and prior allows
max of 4K bytes of transfer per packet.

one sec timeout is not enough for transfers more than 10K bytes
at STD bus rate.

This patch updates I2C transfer timeout based on the transfer size
and I2C bus rate to allow enough time during max transfer size at
lower bus speed.

Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
 [V11/V12/V13/V14/V15/V16/V17/V18/V19] : Same as V10
 [V10] : Reduced the timeout for bus clear operation
	Added adapter timeout to cover worst case transfer rate (max transfer
	size at STD speed) incase if ARB LOST happens during middle/end of 
	the transaction.
 [V9] : Rebased to 5.0-rc4
	Minor updates for readability of xfer time
 [V8] : Added comment with explaination of xfer time calculation
 [V5/V6/V7] : Same as V4
 [V4] : V4 series includes bus clear support and this patch is updated with
	fixed timeout of 1sec for bus clear operation.
 [V3] : Same as V2
 [V2] : Added this patch in V2 series to allow enough time for data transfer
	to happen.
	This patch has dependency with DMA patch as TEGRA_I2C_TIMEOUT define
	takes argument with this patch.


 drivers/i2c/busses/i2c-tegra.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 3b923411c9a7..cfecd81789c3 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -24,7 +24,6 @@
 #include <linux/pm_runtime.h>
 #include <linux/reset.h>
 
-#define TEGRA_I2C_TIMEOUT (msecs_to_jiffies(1000))
 #define BYTES_PER_FIFO_WORD 4
 
 #define I2C_CNFG				0x000
@@ -936,7 +935,7 @@ static int tegra_i2c_issue_bus_clear(struct i2c_adapter *adap)
 	tegra_i2c_unmask_irq(i2c_dev, I2C_INT_BUS_CLR_DONE);
 
 	time_left = wait_for_completion_timeout(&i2c_dev->msg_complete,
-						TEGRA_I2C_TIMEOUT);
+						msecs_to_jiffies(50));
 	if (time_left == 0) {
 		dev_err(i2c_dev->dev, "timed out for bus clear\n");
 		return -ETIMEDOUT;
@@ -963,6 +962,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 	u32 *buffer = NULL;
 	int err = 0;
 	bool dma;
+	u16 xfer_time = 100;
 
 	tegra_i2c_flush_fifos(i2c_dev);
 
@@ -982,6 +982,12 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 				    i2c_dev->dma_buf;
 	tegra_i2c_config_fifo_trig(i2c_dev, xfer_size);
 	dma = i2c_dev->is_curr_dma_xfer;
+	/*
+	 * Transfer time in mSec = Total bits / transfer rate
+	 * Total bits = 9 bits per byte (including ACK bit) + Start & stop bits
+	 */
+	xfer_time += DIV_ROUND_CLOSEST(((xfer_size * 9) + 2) * MSEC_PER_SEC,
+					i2c_dev->bus_clk_rate);
 	spin_lock_irqsave(&i2c_dev->xfer_lock, flags);
 
 	int_mask = I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST;
@@ -1085,7 +1091,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 
 		time_left = wait_for_completion_timeout(
 						&i2c_dev->dma_complete,
-						TEGRA_I2C_TIMEOUT);
+						msecs_to_jiffies(xfer_time));
 		if (time_left == 0) {
 			dev_err(i2c_dev->dev, "DMA transfer timeout\n");
 			dmaengine_terminate_sync(i2c_dev->msg_read ?
@@ -1111,7 +1117,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 	}
 
 	time_left = wait_for_completion_timeout(&i2c_dev->msg_complete,
-						TEGRA_I2C_TIMEOUT);
+						msecs_to_jiffies(xfer_time));
 	tegra_i2c_mask_irq(i2c_dev, int_mask);
 
 	if (time_left == 0) {
@@ -1390,6 +1396,7 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 	i2c_dev->div_clk = div_clk;
 	i2c_dev->adapter.algo = &tegra_i2c_algo;
 	i2c_dev->adapter.retries = 1;
+	i2c_dev->adapter.timeout = 6 * HZ;
 	i2c_dev->irq = irq;
 	i2c_dev->cont_id = pdev->id;
 	i2c_dev->dev = &pdev->dev;
-- 
2.7.4


^ permalink raw reply	[flat|nested] 23+ messages in thread

* [PATCH V19 7/7] i2c: tegra: add i2c interface timing support
  2019-02-12 19:06 [PATCH V19 1/7] i2c: tegra: sort all the include headers alphabetically Sowjanya Komatineni
                   ` (4 preceding siblings ...)
  2019-02-12 19:06 ` [PATCH V19 6/7] i2c: tegra: update transfer timeout Sowjanya Komatineni
@ 2019-02-12 19:06 ` Sowjanya Komatineni
  2019-02-12 21:00 ` [PATCH V19 1/7] i2c: tegra: sort all the include headers alphabetically Peter Rosin
  2019-02-14 16:51 ` Wolfram Sang
  7 siblings, 0 replies; 23+ messages in thread
From: Sowjanya Komatineni @ 2019-02-12 19:06 UTC (permalink / raw)
  To: thierry.reding, jonathanh, mkarthik, smohammed, talho, skomatineni
  Cc: wsa, peda, digetx, linux-tegra, linux-kernel, linux-i2c

This patch adds I2C interface timing registers support for
proper bus rate configuration along with meeting the I2C spec
setup and hold times based on the tuning performed on Tegra210,
Tegra186 and Tegra194 platforms.

I2C_INTERFACE_TIMING_0 register contains TLOW and THIGH field
and Tegra I2C controller design uses them as a part of internal
clock divisor.

I2C_INTERFACE_TIMING_1 register contains the setup and hold times
for start and stop conditions.

Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
 [V17/V18/V19]	: Same as V16
 [V16]		: Minor changes
 [V15]		: Moved Tegra186 hw feature structure to DMA patch of this series.
 [V14]		: INTERFACE_TIMING registers doesnt exist on Tegra114 and prior.
		  Added flag to hw feature to identify this and program only on supported
		  tegra chips.
 [V13]		: Same as V12
 [V12] 		: Fixed strict coding style check issues
 [V9/V10/V11]	: Same as V8
 [V8] 		: Updated to handle timing implementation within tegra_i2c_init directly
 [V7] 		: Minor updates to timing implementation
 [V5/V6] 	: Added this Interface timing patch in V5 of the patch series.


 drivers/i2c/busses/i2c-tegra.c | 189 ++++++++++++++++++++++++++++++++++-------
 1 file changed, 159 insertions(+), 30 deletions(-)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index cfecd81789c3..a4cd79c9f7a7 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -126,6 +126,15 @@
 #define I2C_MST_FIFO_STATUS_TX_MASK		0xff0000
 #define I2C_MST_FIFO_STATUS_TX_SHIFT		16
 
+#define I2C_INTERFACE_TIMING_0			0x94
+#define I2C_THIGH_SHIFT				8
+#define I2C_INTERFACE_TIMING_1			0x98
+
+#define I2C_STANDARD_MODE			100000
+#define I2C_FAST_MODE				400000
+#define I2C_FAST_PLUS_MODE			1000000
+#define I2C_HS_MODE				3500000
+
 /* Packet header size in bytes */
 #define I2C_PACKET_HEADER_SIZE			12
 
@@ -160,7 +169,10 @@ enum msg_end_type {
  * @has_config_load_reg: Has the config load register to load the new
  *		configuration.
  * @clk_divisor_hs_mode: Clock divisor in HS mode.
- * @clk_divisor_std_fast_mode: Clock divisor in standard/fast mode. It is
+ * @clk_divisor_std_mode: Clock divisor in standard mode. It is
+ *		applicable if there is no fast clock source i.e. single clock
+ *		source.
+ * @clk_divisor_fast_mode: Clock divisor in fast mode. It is
  *		applicable if there is no fast clock source i.e. single clock
  *		source.
  * @clk_divisor_fast_plus_mode: Clock divisor in fast mode plus. It is
@@ -178,6 +190,18 @@ enum msg_end_type {
  * @supports_bus_clear: Bus Clear support to recover from bus hang during
  *		SDA stuck low from device for some unknown reasons.
  * @has_apb_dma: Support of APBDMA on corresponding Tegra chip.
+ * @tlow_std_mode: Low period of the clock in standard mode.
+ * @thigh_std_mode: High period of the clock in standard mode.
+ * @tlow_fast_fastplus_mode: Low period of the clock in fast/fast-plus modes.
+ * @thigh_fast_fastplus_mode: High period of the clock in fast/fast-plus modes.
+ * @setup_hold_time_std_mode: Setup and hold time for start and stop conditions
+ *		in standard mode.
+ * @setup_hold_time_fast_fast_plus_mode: Setup and hold time for start and stop
+ *		conditions in fast/fast-plus modes.
+ * @setup_hold_time_hs_mode: Setup and hold time for start and stop conditions
+ *		in HS mode.
+ * @has_interface_timing_reg: Has interface timing register to program the tuned
+ *		timing settings.
  */
 struct tegra_i2c_hw_feature {
 	bool has_continue_xfer_support;
@@ -185,7 +209,8 @@ struct tegra_i2c_hw_feature {
 	bool has_single_clk_source;
 	bool has_config_load_reg;
 	int clk_divisor_hs_mode;
-	int clk_divisor_std_fast_mode;
+	int clk_divisor_std_mode;
+	int clk_divisor_fast_mode;
 	u16 clk_divisor_fast_plus_mode;
 	bool has_multi_master_mode;
 	bool has_slcg_override_reg;
@@ -193,6 +218,14 @@ struct tegra_i2c_hw_feature {
 	const struct i2c_adapter_quirks *quirks;
 	bool supports_bus_clear;
 	bool has_apb_dma;
+	u8 tlow_std_mode;
+	u8 thigh_std_mode;
+	u8 tlow_fast_fastplus_mode;
+	u8 thigh_fast_fastplus_mode;
+	u32 setup_hold_time_std_mode;
+	u32 setup_hold_time_fast_fast_plus_mode;
+	u32 setup_hold_time_hs_mode;
+	bool has_interface_timing_reg;
 };
 
 /**
@@ -660,11 +693,13 @@ static int tegra_i2c_wait_for_config_load(struct tegra_i2c_dev *i2c_dev)
 	return 0;
 }
 
-static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
+static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev, bool clk_reinit)
 {
 	u32 val;
 	int err;
-	u32 clk_divisor;
+	u32 clk_divisor, clk_multiplier;
+	u32 tsu_thd = 0;
+	u8 tlow, thigh;
 
 	err = pm_runtime_get_sync(i2c_dev->dev);
 	if (err < 0) {
@@ -694,6 +729,41 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
 					I2C_CLK_DIVISOR_STD_FAST_MODE_SHIFT;
 	i2c_writel(i2c_dev, clk_divisor, I2C_CLK_DIVISOR);
 
+	if (i2c_dev->bus_clk_rate > I2C_STANDARD_MODE &&
+	    i2c_dev->bus_clk_rate <= I2C_FAST_PLUS_MODE) {
+		tlow = i2c_dev->hw->tlow_fast_fastplus_mode;
+		thigh = i2c_dev->hw->thigh_fast_fastplus_mode;
+		tsu_thd = i2c_dev->hw->setup_hold_time_fast_fast_plus_mode;
+	} else {
+		tlow = i2c_dev->hw->tlow_std_mode;
+		thigh = i2c_dev->hw->thigh_std_mode;
+		tsu_thd = i2c_dev->hw->setup_hold_time_std_mode;
+	}
+
+	if (i2c_dev->hw->has_interface_timing_reg) {
+		val = (thigh << I2C_THIGH_SHIFT) | tlow;
+		i2c_writel(i2c_dev, val, I2C_INTERFACE_TIMING_0);
+	}
+
+	/*
+	 * configure setup and hold times only when tsu_thd is non-zero.
+	 * otherwise, preserve the chip default values
+	 */
+	if (i2c_dev->hw->has_interface_timing_reg && tsu_thd)
+		i2c_writel(i2c_dev, tsu_thd, I2C_INTERFACE_TIMING_1);
+
+	if (!clk_reinit) {
+		clk_multiplier = (tlow + thigh + 2);
+		clk_multiplier *= (i2c_dev->clk_divisor_non_hs_mode + 1);
+		err = clk_set_rate(i2c_dev->div_clk,
+				   i2c_dev->bus_clk_rate * clk_multiplier);
+		if (err) {
+			dev_err(i2c_dev->dev,
+				"failed changing clock rate: %d\n", err);
+			goto err;
+		}
+	}
+
 	if (!i2c_dev->is_dvc) {
 		u32 sl_cfg = i2c_readl(i2c_dev, I2C_SL_CNFG);
 
@@ -1097,7 +1167,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 			dmaengine_terminate_sync(i2c_dev->msg_read ?
 						 i2c_dev->rx_dma_chan :
 						 i2c_dev->tx_dma_chan);
-			tegra_i2c_init(i2c_dev);
+			tegra_i2c_init(i2c_dev, true);
 			return -ETIMEDOUT;
 		}
 
@@ -1123,7 +1193,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 	if (time_left == 0) {
 		dev_err(i2c_dev->dev, "i2c transfer timed out\n");
 
-		tegra_i2c_init(i2c_dev);
+		tegra_i2c_init(i2c_dev, true);
 		return -ETIMEDOUT;
 	}
 
@@ -1135,7 +1205,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 	if (likely(i2c_dev->msg_err == I2C_ERR_NONE))
 		return 0;
 
-	tegra_i2c_init(i2c_dev);
+	tegra_i2c_init(i2c_dev, true);
 	/* start recovery upon arbitration loss in single master mode */
 	if (i2c_dev->msg_err == I2C_ERR_ARBITRATION_LOST) {
 		if (!i2c_dev->is_multimaster_mode)
@@ -1235,7 +1305,8 @@ static const struct tegra_i2c_hw_feature tegra20_i2c_hw = {
 	.has_per_pkt_xfer_complete_irq = false,
 	.has_single_clk_source = false,
 	.clk_divisor_hs_mode = 3,
-	.clk_divisor_std_fast_mode = 0,
+	.clk_divisor_std_mode = 0,
+	.clk_divisor_fast_mode = 0,
 	.clk_divisor_fast_plus_mode = 0,
 	.has_config_load_reg = false,
 	.has_multi_master_mode = false,
@@ -1244,6 +1315,14 @@ static const struct tegra_i2c_hw_feature tegra20_i2c_hw = {
 	.quirks = &tegra_i2c_quirks,
 	.supports_bus_clear = false,
 	.has_apb_dma = true,
+	.tlow_std_mode = 0x4,
+	.thigh_std_mode = 0x2,
+	.tlow_fast_fastplus_mode = 0x4,
+	.thigh_fast_fastplus_mode = 0x2,
+	.setup_hold_time_std_mode = 0x0,
+	.setup_hold_time_fast_fast_plus_mode = 0x0,
+	.setup_hold_time_hs_mode = 0x0,
+	.has_interface_timing_reg = false,
 };
 
 static const struct tegra_i2c_hw_feature tegra30_i2c_hw = {
@@ -1251,7 +1330,8 @@ static const struct tegra_i2c_hw_feature tegra30_i2c_hw = {
 	.has_per_pkt_xfer_complete_irq = false,
 	.has_single_clk_source = false,
 	.clk_divisor_hs_mode = 3,
-	.clk_divisor_std_fast_mode = 0,
+	.clk_divisor_std_mode = 0,
+	.clk_divisor_fast_mode = 0,
 	.clk_divisor_fast_plus_mode = 0,
 	.has_config_load_reg = false,
 	.has_multi_master_mode = false,
@@ -1260,6 +1340,14 @@ static const struct tegra_i2c_hw_feature tegra30_i2c_hw = {
 	.quirks = &tegra_i2c_quirks,
 	.supports_bus_clear = false,
 	.has_apb_dma = true,
+	.tlow_std_mode = 0x4,
+	.thigh_std_mode = 0x2,
+	.tlow_fast_fastplus_mode = 0x4,
+	.thigh_fast_fastplus_mode = 0x2,
+	.setup_hold_time_std_mode = 0x0,
+	.setup_hold_time_fast_fast_plus_mode = 0x0,
+	.setup_hold_time_hs_mode = 0x0,
+	.has_interface_timing_reg = false,
 };
 
 static const struct tegra_i2c_hw_feature tegra114_i2c_hw = {
@@ -1267,7 +1355,8 @@ static const struct tegra_i2c_hw_feature tegra114_i2c_hw = {
 	.has_per_pkt_xfer_complete_irq = true,
 	.has_single_clk_source = true,
 	.clk_divisor_hs_mode = 1,
-	.clk_divisor_std_fast_mode = 0x19,
+	.clk_divisor_std_mode = 0x19,
+	.clk_divisor_fast_mode = 0x19,
 	.clk_divisor_fast_plus_mode = 0x10,
 	.has_config_load_reg = false,
 	.has_multi_master_mode = false,
@@ -1276,6 +1365,14 @@ static const struct tegra_i2c_hw_feature tegra114_i2c_hw = {
 	.quirks = &tegra_i2c_quirks,
 	.supports_bus_clear = true,
 	.has_apb_dma = true,
+	.tlow_std_mode = 0x4,
+	.thigh_std_mode = 0x2,
+	.tlow_fast_fastplus_mode = 0x4,
+	.thigh_fast_fastplus_mode = 0x2,
+	.setup_hold_time_std_mode = 0x0,
+	.setup_hold_time_fast_fast_plus_mode = 0x0,
+	.setup_hold_time_hs_mode = 0x0,
+	.has_interface_timing_reg = false,
 };
 
 static const struct tegra_i2c_hw_feature tegra124_i2c_hw = {
@@ -1283,7 +1380,8 @@ static const struct tegra_i2c_hw_feature tegra124_i2c_hw = {
 	.has_per_pkt_xfer_complete_irq = true,
 	.has_single_clk_source = true,
 	.clk_divisor_hs_mode = 1,
-	.clk_divisor_std_fast_mode = 0x19,
+	.clk_divisor_std_mode = 0x19,
+	.clk_divisor_fast_mode = 0x19,
 	.clk_divisor_fast_plus_mode = 0x10,
 	.has_config_load_reg = true,
 	.has_multi_master_mode = false,
@@ -1292,6 +1390,14 @@ static const struct tegra_i2c_hw_feature tegra124_i2c_hw = {
 	.quirks = &tegra_i2c_quirks,
 	.supports_bus_clear = true,
 	.has_apb_dma = true,
+	.tlow_std_mode = 0x4,
+	.thigh_std_mode = 0x2,
+	.tlow_fast_fastplus_mode = 0x4,
+	.thigh_fast_fastplus_mode = 0x2,
+	.setup_hold_time_std_mode = 0x0,
+	.setup_hold_time_fast_fast_plus_mode = 0x0,
+	.setup_hold_time_hs_mode = 0x0,
+	.has_interface_timing_reg = true,
 };
 
 static const struct tegra_i2c_hw_feature tegra210_i2c_hw = {
@@ -1299,7 +1405,8 @@ static const struct tegra_i2c_hw_feature tegra210_i2c_hw = {
 	.has_per_pkt_xfer_complete_irq = true,
 	.has_single_clk_source = true,
 	.clk_divisor_hs_mode = 1,
-	.clk_divisor_std_fast_mode = 0x19,
+	.clk_divisor_std_mode = 0x19,
+	.clk_divisor_fast_mode = 0x19,
 	.clk_divisor_fast_plus_mode = 0x10,
 	.has_config_load_reg = true,
 	.has_multi_master_mode = true,
@@ -1308,6 +1415,14 @@ static const struct tegra_i2c_hw_feature tegra210_i2c_hw = {
 	.quirks = &tegra_i2c_quirks,
 	.supports_bus_clear = true,
 	.has_apb_dma = true,
+	.tlow_std_mode = 0x4,
+	.thigh_std_mode = 0x2,
+	.tlow_fast_fastplus_mode = 0x4,
+	.thigh_fast_fastplus_mode = 0x2,
+	.setup_hold_time_std_mode = 0,
+	.setup_hold_time_fast_fast_plus_mode = 0,
+	.setup_hold_time_hs_mode = 0,
+	.has_interface_timing_reg = true,
 };
 
 static const struct tegra_i2c_hw_feature tegra186_i2c_hw = {
@@ -1315,7 +1430,8 @@ static const struct tegra_i2c_hw_feature tegra186_i2c_hw = {
 	.has_per_pkt_xfer_complete_irq = true,
 	.has_single_clk_source = true,
 	.clk_divisor_hs_mode = 1,
-	.clk_divisor_std_fast_mode = 0x19,
+	.clk_divisor_std_mode = 0x16,
+	.clk_divisor_fast_mode = 0x19,
 	.clk_divisor_fast_plus_mode = 0x10,
 	.has_config_load_reg = true,
 	.has_multi_master_mode = true,
@@ -1324,6 +1440,14 @@ static const struct tegra_i2c_hw_feature tegra186_i2c_hw = {
 	.quirks = &tegra_i2c_quirks,
 	.supports_bus_clear = true,
 	.has_apb_dma = false,
+	.tlow_std_mode = 0x4,
+	.thigh_std_mode = 0x3,
+	.tlow_fast_fastplus_mode = 0x4,
+	.thigh_fast_fastplus_mode = 0x2,
+	.setup_hold_time_std_mode = 0,
+	.setup_hold_time_fast_fast_plus_mode = 0,
+	.setup_hold_time_hs_mode = 0,
+	.has_interface_timing_reg = true,
 };
 
 static const struct tegra_i2c_hw_feature tegra194_i2c_hw = {
@@ -1331,8 +1455,9 @@ static const struct tegra_i2c_hw_feature tegra194_i2c_hw = {
 	.has_per_pkt_xfer_complete_irq = true,
 	.has_single_clk_source = true,
 	.clk_divisor_hs_mode = 1,
-	.clk_divisor_std_fast_mode = 0x19,
-	.clk_divisor_fast_plus_mode = 0x10,
+	.clk_divisor_std_mode = 0x4f,
+	.clk_divisor_fast_mode = 0x3c,
+	.clk_divisor_fast_plus_mode = 0x16,
 	.has_config_load_reg = true,
 	.has_multi_master_mode = true,
 	.has_slcg_override_reg = true,
@@ -1340,6 +1465,14 @@ static const struct tegra_i2c_hw_feature tegra194_i2c_hw = {
 	.quirks = &tegra194_i2c_quirks,
 	.supports_bus_clear = true,
 	.has_apb_dma = false,
+	.tlow_std_mode = 0x8,
+	.thigh_std_mode = 0x7,
+	.tlow_fast_fastplus_mode = 0x2,
+	.thigh_fast_fastplus_mode = 0x2,
+	.setup_hold_time_std_mode = 0x08080808,
+	.setup_hold_time_fast_fast_plus_mode = 0x02020202,
+	.setup_hold_time_hs_mode = 0x090909,
+	.has_interface_timing_reg = true,
 };
 
 /* Match table for of_platform binding */
@@ -1366,7 +1499,6 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 	phys_addr_t base_phys;
 	int irq;
 	int ret = 0;
-	int clk_multiplier = I2C_CLK_MULTIPLIER_STD_FAST_MODE;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	base_phys = res->start;
@@ -1438,20 +1570,17 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 		}
 	}
 
-	i2c_dev->clk_divisor_non_hs_mode =
-			i2c_dev->hw->clk_divisor_std_fast_mode;
-	if (i2c_dev->hw->clk_divisor_fast_plus_mode &&
-		(i2c_dev->bus_clk_rate == 1000000))
+	if (i2c_dev->bus_clk_rate > I2C_FAST_MODE &&
+	    i2c_dev->bus_clk_rate <= I2C_FAST_PLUS_MODE)
 		i2c_dev->clk_divisor_non_hs_mode =
-			i2c_dev->hw->clk_divisor_fast_plus_mode;
-
-	clk_multiplier *= (i2c_dev->clk_divisor_non_hs_mode + 1);
-	ret = clk_set_rate(i2c_dev->div_clk,
-			   i2c_dev->bus_clk_rate * clk_multiplier);
-	if (ret) {
-		dev_err(i2c_dev->dev, "Clock rate change failed %d\n", ret);
-		goto unprepare_fast_clk;
-	}
+				i2c_dev->hw->clk_divisor_fast_plus_mode;
+	else if (i2c_dev->bus_clk_rate > I2C_STANDARD_MODE &&
+		 i2c_dev->bus_clk_rate <= I2C_FAST_MODE)
+		i2c_dev->clk_divisor_non_hs_mode =
+				i2c_dev->hw->clk_divisor_fast_mode;
+	else
+		i2c_dev->clk_divisor_non_hs_mode =
+				i2c_dev->hw->clk_divisor_std_mode;
 
 	ret = clk_prepare(i2c_dev->div_clk);
 	if (ret < 0) {
@@ -1484,7 +1613,7 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto disable_div_clk;
 
-	ret = tegra_i2c_init(i2c_dev);
+	ret = tegra_i2c_init(i2c_dev, false);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to initialize i2c controller\n");
 		goto release_dma;
-- 
2.7.4


^ permalink raw reply	[flat|nested] 23+ messages in thread

* Re: [PATCH V19 1/7] i2c: tegra: sort all the include headers alphabetically
  2019-02-12 19:06 [PATCH V19 1/7] i2c: tegra: sort all the include headers alphabetically Sowjanya Komatineni
                   ` (5 preceding siblings ...)
  2019-02-12 19:06 ` [PATCH V19 7/7] i2c: tegra: add i2c interface timing support Sowjanya Komatineni
@ 2019-02-12 21:00 ` Peter Rosin
  2019-02-12 21:15   ` Dmitry Osipenko
  2019-02-14 16:51 ` Wolfram Sang
  7 siblings, 1 reply; 23+ messages in thread
From: Peter Rosin @ 2019-02-12 21:00 UTC (permalink / raw)
  To: Sowjanya Komatineni, thierry.reding, jonathanh, mkarthik,
	smohammed, talho
  Cc: wsa, digetx, linux-tegra, linux-kernel, linux-i2c

On 2019-02-12 20:06, Sowjanya Komatineni wrote:
> This patch sorts all the include headers alphabetically for the
> I2C Tegra driver.
> 
> Acked-by: Thierry Reding <treding@nvidia.com>
> Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
> ---
>  [V9/V10/V11/V12/V13/V14/V15/V16/V17/V18/V19] : Rebased to 5.0-rc4
>  [V3/V4/V5/V7/V8] : Removed unsued headers in tegra I2C

"^ Header removal should be mentioned in the commit message, I think."
- Wolfram Sang [0]

Cheers,
Peter

[0] https://lkml.org/lkml/2019/2/11/375

^ permalink raw reply	[flat|nested] 23+ messages in thread

* Re: [PATCH V19 1/7] i2c: tegra: sort all the include headers alphabetically
  2019-02-12 21:00 ` [PATCH V19 1/7] i2c: tegra: sort all the include headers alphabetically Peter Rosin
@ 2019-02-12 21:15   ` Dmitry Osipenko
  2019-02-13  8:35     ` Wolfram Sang
  0 siblings, 1 reply; 23+ messages in thread
From: Dmitry Osipenko @ 2019-02-12 21:15 UTC (permalink / raw)
  To: Peter Rosin, Sowjanya Komatineni, thierry.reding, jonathanh,
	mkarthik, smohammed, talho
  Cc: wsa, linux-tegra, linux-kernel, linux-i2c

13.02.2019 0:00, Peter Rosin пишет:
> On 2019-02-12 20:06, Sowjanya Komatineni wrote:
>> This patch sorts all the include headers alphabetically for the
>> I2C Tegra driver.
>>
>> Acked-by: Thierry Reding <treding@nvidia.com>
>> Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
>> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
>> ---
>>  [V9/V10/V11/V12/V13/V14/V15/V16/V17/V18/V19] : Rebased to 5.0-rc4
>>  [V3/V4/V5/V7/V8] : Removed unsued headers in tegra I2C
> 
> "^ Header removal should be mentioned in the commit message, I think."
> - Wolfram Sang [0]
> 
> Cheers,
> Peter
> 
> [0] https://lkml.org/lkml/2019/2/11/375
> 

It could make sense to adjust the comment only if there will be anything else worthwhile a new revision, otherwise it is not-so-important. 

^ permalink raw reply	[flat|nested] 23+ messages in thread

* Re: [PATCH V19 1/7] i2c: tegra: sort all the include headers alphabetically
  2019-02-12 21:15   ` Dmitry Osipenko
@ 2019-02-13  8:35     ` Wolfram Sang
  2019-02-13 13:13       ` Dmitry Osipenko
  0 siblings, 1 reply; 23+ messages in thread
From: Wolfram Sang @ 2019-02-13  8:35 UTC (permalink / raw)
  To: Dmitry Osipenko
  Cc: Peter Rosin, Sowjanya Komatineni, thierry.reding, jonathanh,
	mkarthik, smohammed, talho, linux-tegra, linux-kernel, linux-i2c

[-- Attachment #1: Type: text/plain, Size: 673 bytes --]


> > "^ Header removal should be mentioned in the commit message, I think."
> > - Wolfram Sang [0]
> > 
> > Cheers,
> > Peter
> > 
> > [0] https://lkml.org/lkml/2019/2/11/375
> > 
> 
> It could make sense to adjust the comment only if there will be
> anything else worthwhile a new revision, otherwise it is
> not-so-important. 

Not quite. Addressing review comments and proper commit messages are
both important. So, it needs to be fixed. Yes, I can fix this small
issue locally here (and I will do this, so no need to resend), but this
is ultimately my decision (which you can surely ask for but not
rely on).

I'll apply this series later today.


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 23+ messages in thread

* Re: [PATCH V19 1/7] i2c: tegra: sort all the include headers alphabetically
  2019-02-13  8:35     ` Wolfram Sang
@ 2019-02-13 13:13       ` Dmitry Osipenko
  2019-02-13 14:55         ` Wolfram Sang
  0 siblings, 1 reply; 23+ messages in thread
From: Dmitry Osipenko @ 2019-02-13 13:13 UTC (permalink / raw)
  To: Wolfram Sang
  Cc: Peter Rosin, Sowjanya Komatineni, thierry.reding, jonathanh,
	mkarthik, smohammed, talho, linux-tegra, linux-kernel, linux-i2c

13.02.2019 11:35, Wolfram Sang пишет:
> 
>>> "^ Header removal should be mentioned in the commit message, I think."
>>> - Wolfram Sang [0]
>>>
>>> Cheers,
>>> Peter
>>>
>>> [0] https://lkml.org/lkml/2019/2/11/375
>>>
>>
>> It could make sense to adjust the comment only if there will be
>> anything else worthwhile a new revision, otherwise it is
>> not-so-important. 
> 
> Not quite. Addressing review comments and proper commit messages are
> both important. So, it needs to be fixed. Yes, I can fix this small
> issue locally here (and I will do this, so no need to resend), but this
> is ultimately my decision (which you can surely ask for but not
> rely on).
> 
> I'll apply this series later today.
> 

Fixing up minor itches while applying patches is the right approach, thank you!

^ permalink raw reply	[flat|nested] 23+ messages in thread

* Re: [PATCH V19 1/7] i2c: tegra: sort all the include headers alphabetically
  2019-02-13 13:13       ` Dmitry Osipenko
@ 2019-02-13 14:55         ` Wolfram Sang
  2019-02-13 23:45           ` Sowjanya Komatineni
  0 siblings, 1 reply; 23+ messages in thread
From: Wolfram Sang @ 2019-02-13 14:55 UTC (permalink / raw)
  To: Dmitry Osipenko
  Cc: Peter Rosin, Sowjanya Komatineni, thierry.reding, jonathanh,
	mkarthik, smohammed, talho, linux-tegra, linux-kernel, linux-i2c

[-- Attachment #1: Type: text/plain, Size: 150 bytes --]


> Fixing up minor itches while applying patches is the right approach,
> thank you!

It often is. But making a dogma out of it goes nowhere for me.


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 23+ messages in thread

* RE: [PATCH V19 1/7] i2c: tegra: sort all the include headers alphabetically
  2019-02-13 14:55         ` Wolfram Sang
@ 2019-02-13 23:45           ` Sowjanya Komatineni
  2019-02-14 16:51             ` Wolfram Sang
  0 siblings, 1 reply; 23+ messages in thread
From: Sowjanya Komatineni @ 2019-02-13 23:45 UTC (permalink / raw)
  To: Wolfram Sang, Dmitry Osipenko
  Cc: Peter Rosin, thierry.reding, Jonathan Hunter, Mantravadi Karthik,
	Shardar Mohammed, Timo Alho, linux-tegra, linux-kernel,
	linux-i2c

> > Fixing up minor itches while applying patches is the right approach, 
> > thank you!
>
> It often is. But making a dogma out of it goes nowhere for me.

Sorry, somehow I looked at your 2nd reply for this patch-1 of V19 about having few comments to take care in this series but missed to view your 1st reply to same patch-1 of V19.
Fixed my mail view so will not miss next time.

Appreciate if you can help fix the comment while applying patches.

Thanks a lot
Sowjanya


^ permalink raw reply	[flat|nested] 23+ messages in thread

* Re: [PATCH V19 1/7] i2c: tegra: sort all the include headers alphabetically
  2019-02-13 23:45           ` Sowjanya Komatineni
@ 2019-02-14 16:51             ` Wolfram Sang
  0 siblings, 0 replies; 23+ messages in thread
From: Wolfram Sang @ 2019-02-14 16:51 UTC (permalink / raw)
  To: Sowjanya Komatineni
  Cc: Dmitry Osipenko, Peter Rosin, thierry.reding, Jonathan Hunter,
	Mantravadi Karthik, Shardar Mohammed, Timo Alho, linux-tegra,
	linux-kernel, linux-i2c

[-- Attachment #1: Type: text/plain, Size: 99 bytes --]


> Appreciate if you can help fix the comment while applying patches.

You are welcome, Sowjanya.


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 23+ messages in thread

* Re: [PATCH V19 1/7] i2c: tegra: sort all the include headers alphabetically
  2019-02-12 19:06 [PATCH V19 1/7] i2c: tegra: sort all the include headers alphabetically Sowjanya Komatineni
                   ` (6 preceding siblings ...)
  2019-02-12 21:00 ` [PATCH V19 1/7] i2c: tegra: sort all the include headers alphabetically Peter Rosin
@ 2019-02-14 16:51 ` Wolfram Sang
  7 siblings, 0 replies; 23+ messages in thread
From: Wolfram Sang @ 2019-02-14 16:51 UTC (permalink / raw)
  To: Sowjanya Komatineni
  Cc: thierry.reding, jonathanh, mkarthik, smohammed, talho, peda,
	digetx, linux-tegra, linux-kernel, linux-i2c

[-- Attachment #1: Type: text/plain, Size: 372 bytes --]

On Tue, Feb 12, 2019 at 11:06:42AM -0800, Sowjanya Komatineni wrote:
> This patch sorts all the include headers alphabetically for the
> I2C Tegra driver.
> 
> Acked-by: Thierry Reding <treding@nvidia.com>
> Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>

Whole series applied to for-next, thanks!


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 23+ messages in thread

* Re: [PATCH V19 5/7] i2c: tegra: Add DMA support
  2019-02-12 19:06 ` [PATCH V19 5/7] i2c: tegra: Add DMA support Sowjanya Komatineni
@ 2019-02-14 16:53   ` Wolfram Sang
  2019-02-20 18:02   ` Jon Hunter
  1 sibling, 0 replies; 23+ messages in thread
From: Wolfram Sang @ 2019-02-14 16:53 UTC (permalink / raw)
  To: Sowjanya Komatineni
  Cc: thierry.reding, jonathanh, mkarthik, smohammed, talho, peda,
	digetx, linux-tegra, linux-kernel, linux-i2c

[-- Attachment #1: Type: text/plain, Size: 1804 bytes --]

On Tue, Feb 12, 2019 at 11:06:46AM -0800, Sowjanya Komatineni wrote:
> This patch adds DMA support for Tegra I2C.
> 
> Tegra I2C TX and RX FIFO depth is 8 words. PIO mode is used for
> transfer size of the max FIFO depth and DMA mode is used for
> transfer size higher than max FIFO depth to save CPU overhead.
> 
> PIO mode needs full intervention of CPU to fill or empty FIFO's
> and also need to service multiple data requests interrupt for the
> same transaction. This adds delay between data bytes of the same
> transfer when CPU is fully loaded and some slave devices has
> internal timeout for no bus activity and stops transaction to
> avoid bus hang. DMA mode is helpful in such cases.
> 
> DMA mode is also helpful for Large transfers during downloading or
> uploading FW over I2C to some external devices.
> 
> Tegra210 and prior Tegra chips use APBDMA driver which is replaced
> with GPCDMA on Tegra186 and Tegra194.
> This patch uses has_apb_dma flag in hw_feature to differentiate
> DMA driver change between Tegra chipset.
> 
> APBDMA driver is registered from module-init level and this patch
> also has a change to register I2C driver at module-init level
> rather than subsys-init to avoid deferring I2C probe till APBDMA
> driver is registered.
> 
> Acked-by: Thierry Reding <treding@nvidia.com>
> Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
> Tested-by: Dmitry Osipenko <digetx@gmail.com>
> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>

Not directly related to your code, but maybe someone is interested in
fixing this rightful checkpatch comment somewhen later:

WARNING: Avoid crashing the kernel - try using WARN_ON & recovery code rather than BUG() or BUG_ON()
#332: FILE: drivers/i2c/busses/i2c-tegra.c:791:
+				BUG();


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 23+ messages in thread

* Re: [PATCH V19 5/7] i2c: tegra: Add DMA support
  2019-02-12 19:06 ` [PATCH V19 5/7] i2c: tegra: Add DMA support Sowjanya Komatineni
  2019-02-14 16:53   ` Wolfram Sang
@ 2019-02-20 18:02   ` Jon Hunter
  2019-02-20 18:05     ` Dmitry Osipenko
  1 sibling, 1 reply; 23+ messages in thread
From: Jon Hunter @ 2019-02-20 18:02 UTC (permalink / raw)
  To: Sowjanya Komatineni, thierry.reding, mkarthik, smohammed, talho
  Cc: wsa, peda, digetx, linux-tegra, linux-kernel, linux-i2c


On 12/02/2019 19:06, Sowjanya Komatineni wrote:
> This patch adds DMA support for Tegra I2C.
> 
> Tegra I2C TX and RX FIFO depth is 8 words. PIO mode is used for
> transfer size of the max FIFO depth and DMA mode is used for
> transfer size higher than max FIFO depth to save CPU overhead.
> 
> PIO mode needs full intervention of CPU to fill or empty FIFO's
> and also need to service multiple data requests interrupt for the
> same transaction. This adds delay between data bytes of the same
> transfer when CPU is fully loaded and some slave devices has
> internal timeout for no bus activity and stops transaction to
> avoid bus hang. DMA mode is helpful in such cases.
> 
> DMA mode is also helpful for Large transfers during downloading or
> uploading FW over I2C to some external devices.
> 
> Tegra210 and prior Tegra chips use APBDMA driver which is replaced
> with GPCDMA on Tegra186 and Tegra194.
> This patch uses has_apb_dma flag in hw_feature to differentiate
> DMA driver change between Tegra chipset.
> 
> APBDMA driver is registered from module-init level and this patch
> also has a change to register I2C driver at module-init level
> rather than subsys-init to avoid deferring I2C probe till APBDMA
> driver is registered.
> 
> Acked-by: Thierry Reding <treding@nvidia.com>
> Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
> Tested-by: Dmitry Osipenko <digetx@gmail.com>
> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>

...

> +static int tegra_i2c_init_dma(struct tegra_i2c_dev *i2c_dev)
> +{
> +	struct dma_chan *chan;
> +	u32 *dma_buf;
> +	dma_addr_t dma_phys;
> +	int err;
> +
> +	if (!IS_ENABLED(CONFIG_TEGRA20_APB_DMA) ||
> +	    !i2c_dev->hw->has_apb_dma) {
> +		err = -ENODEV;
> +		goto err_out;
> +	}
> +
> +	chan = dma_request_slave_channel_reason(i2c_dev->dev, "rx");
> +	if (IS_ERR(chan)) {
> +		err = PTR_ERR(chan);
> +		goto err_out;
> +	}
> +
> +	i2c_dev->rx_dma_chan = chan;
> +
> +	chan = dma_request_slave_channel_reason(i2c_dev->dev, "tx");
> +	if (IS_ERR(chan)) {
> +		err = PTR_ERR(chan);
> +		goto err_out;
> +	}
> +
> +	i2c_dev->tx_dma_chan = chan;
> +
> +	dma_buf = dma_alloc_coherent(i2c_dev->dev, i2c_dev->dma_buf_size,
> +				     &dma_phys, GFP_KERNEL | __GFP_NOWARN);
> +	if (!dma_buf) {
> +		dev_err(i2c_dev->dev, "failed to allocate the DMA buffer\n");
> +		err = -ENOMEM;
> +		goto err_out;
> +	}
> +
> +	i2c_dev->dma_buf = dma_buf;
> +	i2c_dev->dma_phys = dma_phys;
> +	return 0;
> +
> +err_out:
> +	tegra_i2c_release_dma(i2c_dev);
> +	if (err != -EPROBE_DEFER) {
> +		dev_err(i2c_dev->dev, "cannot use DMA: %d\n", err);
> +		dev_err(i2c_dev->dev, "fallbacking to PIO\n");
> +		return 0;
> +	}
I think that the above should be a dev_dbg print or re-worked in someway
because now for Tegra194 which does not have an APB DMA I see ...

[       6.093234] ERR KERN tegra-i2c 31c0000.i2c: cannot use DMA: -19
[       6.096847] ERR KERN tegra-i2c 31c0000.i2c: falling back to PIO

Given that the APB DMA is not supported for Tegra186/Tegra194, there is
no point in printing these error messages. Now it looks like something
is wrong but really it is not :-(

Cheers
Jon

-- 
nvpublic

^ permalink raw reply	[flat|nested] 23+ messages in thread

* Re: [PATCH V19 5/7] i2c: tegra: Add DMA support
  2019-02-20 18:02   ` Jon Hunter
@ 2019-02-20 18:05     ` Dmitry Osipenko
  0 siblings, 0 replies; 23+ messages in thread
From: Dmitry Osipenko @ 2019-02-20 18:05 UTC (permalink / raw)
  To: Jon Hunter, Sowjanya Komatineni, thierry.reding, mkarthik,
	smohammed, talho
  Cc: wsa, peda, linux-tegra, linux-kernel, linux-i2c

20.02.2019 21:02, Jon Hunter пишет:
> 
> On 12/02/2019 19:06, Sowjanya Komatineni wrote:
>> This patch adds DMA support for Tegra I2C.
>>
>> Tegra I2C TX and RX FIFO depth is 8 words. PIO mode is used for
>> transfer size of the max FIFO depth and DMA mode is used for
>> transfer size higher than max FIFO depth to save CPU overhead.
>>
>> PIO mode needs full intervention of CPU to fill or empty FIFO's
>> and also need to service multiple data requests interrupt for the
>> same transaction. This adds delay between data bytes of the same
>> transfer when CPU is fully loaded and some slave devices has
>> internal timeout for no bus activity and stops transaction to
>> avoid bus hang. DMA mode is helpful in such cases.
>>
>> DMA mode is also helpful for Large transfers during downloading or
>> uploading FW over I2C to some external devices.
>>
>> Tegra210 and prior Tegra chips use APBDMA driver which is replaced
>> with GPCDMA on Tegra186 and Tegra194.
>> This patch uses has_apb_dma flag in hw_feature to differentiate
>> DMA driver change between Tegra chipset.
>>
>> APBDMA driver is registered from module-init level and this patch
>> also has a change to register I2C driver at module-init level
>> rather than subsys-init to avoid deferring I2C probe till APBDMA
>> driver is registered.
>>
>> Acked-by: Thierry Reding <treding@nvidia.com>
>> Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
>> Tested-by: Dmitry Osipenko <digetx@gmail.com>
>> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
> 
> ...
> 
>> +static int tegra_i2c_init_dma(struct tegra_i2c_dev *i2c_dev)
>> +{
>> +	struct dma_chan *chan;
>> +	u32 *dma_buf;
>> +	dma_addr_t dma_phys;
>> +	int err;
>> +
>> +	if (!IS_ENABLED(CONFIG_TEGRA20_APB_DMA) ||
>> +	    !i2c_dev->hw->has_apb_dma) {
>> +		err = -ENODEV;
>> +		goto err_out;
>> +	}
>> +
>> +	chan = dma_request_slave_channel_reason(i2c_dev->dev, "rx");
>> +	if (IS_ERR(chan)) {
>> +		err = PTR_ERR(chan);
>> +		goto err_out;
>> +	}
>> +
>> +	i2c_dev->rx_dma_chan = chan;
>> +
>> +	chan = dma_request_slave_channel_reason(i2c_dev->dev, "tx");
>> +	if (IS_ERR(chan)) {
>> +		err = PTR_ERR(chan);
>> +		goto err_out;
>> +	}
>> +
>> +	i2c_dev->tx_dma_chan = chan;
>> +
>> +	dma_buf = dma_alloc_coherent(i2c_dev->dev, i2c_dev->dma_buf_size,
>> +				     &dma_phys, GFP_KERNEL | __GFP_NOWARN);
>> +	if (!dma_buf) {
>> +		dev_err(i2c_dev->dev, "failed to allocate the DMA buffer\n");
>> +		err = -ENOMEM;
>> +		goto err_out;
>> +	}
>> +
>> +	i2c_dev->dma_buf = dma_buf;
>> +	i2c_dev->dma_phys = dma_phys;
>> +	return 0;
>> +
>> +err_out:
>> +	tegra_i2c_release_dma(i2c_dev);
>> +	if (err != -EPROBE_DEFER) {
>> +		dev_err(i2c_dev->dev, "cannot use DMA: %d\n", err);
>> +		dev_err(i2c_dev->dev, "fallbacking to PIO\n");
>> +		return 0;
>> +	}
> I think that the above should be a dev_dbg print or re-worked in someway
> because now for Tegra194 which does not have an APB DMA I see ...
> 
> [       6.093234] ERR KERN tegra-i2c 31c0000.i2c: cannot use DMA: -19
> [       6.096847] ERR KERN tegra-i2c 31c0000.i2c: falling back to PIO
> 
> Given that the APB DMA is not supported for Tegra186/Tegra194, there is
> no point in printing these error messages. Now it looks like something
> is wrong but really it is not :-(

Jon, patches are welcome ;)

^ permalink raw reply	[flat|nested] 23+ messages in thread

* RE: [PATCH V19 1/7] i2c: tegra: sort all the include headers alphabetically
  2019-02-12 18:42   ` Dmitry Osipenko
@ 2019-02-12 18:45     ` Sowjanya Komatineni
  0 siblings, 0 replies; 23+ messages in thread
From: Sowjanya Komatineni @ 2019-02-12 18:45 UTC (permalink / raw)
  To: Dmitry Osipenko, thierry.reding, Jonathan Hunter,
	Mantravadi Karthik, Shardar Mohammed, Timo Alho
  Cc: wsa, peda, linux-tegra, linux-kernel, linux-i2c

> 12.02.2019 21:32, Sowjanya Komatineni пишет:
> > Please ignore all Patch V19 series. Will resend.
> > 
> > Dmitry/Thierry
> > I am using below stable tags in commit message based on V18 feedback 
> > to get patch applied to old kernels Git send email considers whole text after Cc as email address and reports badly formatted address.
> > 
> > Is there any format that I should follow to specify kernel versions along with stable tag?
> > 
> > Cc: stable@vger.kernel.org # 4.4+
> > Cc: stable@vger.kernel.org # 4.20+
>
> You could ask send-email to not auto-include CC's from the commit message: 
>
> git send-email --suppress-cc=all
>
> Also see https://git-scm.com/docs/git-send-email#git-send-email---suppress-ccltcategorygt for more options.

Thanks Dmitry. Will go thru...

^ permalink raw reply	[flat|nested] 23+ messages in thread

* Re: [PATCH V19 1/7] i2c: tegra: sort all the include headers alphabetically
  2019-02-12 18:32 ` Sowjanya Komatineni
@ 2019-02-12 18:42   ` Dmitry Osipenko
  2019-02-12 18:45     ` Sowjanya Komatineni
  0 siblings, 1 reply; 23+ messages in thread
From: Dmitry Osipenko @ 2019-02-12 18:42 UTC (permalink / raw)
  To: Sowjanya Komatineni, thierry.reding, Jonathan Hunter,
	Mantravadi Karthik, Shardar Mohammed, Timo Alho
  Cc: wsa, peda, linux-tegra, linux-kernel, linux-i2c

12.02.2019 21:32, Sowjanya Komatineni пишет:
> Please ignore all Patch V19 series. Will resend.
> 
> Dmitry/Thierry
> I am using below stable tags in commit message based on V18 feedback to get patch applied to old kernels
> Git send email considers whole text after Cc as email address and reports badly formatted address.
> 
> Is there any format that I should follow to specify kernel versions along with stable tag?
> 
> Cc: stable@vger.kernel.org # 4.4+
> Cc: stable@vger.kernel.org # 4.20+

You could ask send-email to not auto-include CC's from the commit message: 

git send-email --suppress-cc=all

Also see https://git-scm.com/docs/git-send-email#git-send-email---suppress-ccltcategorygt for more options.

^ permalink raw reply	[flat|nested] 23+ messages in thread

* RE: [PATCH V19 1/7] i2c: tegra: sort all the include headers alphabetically
  2019-02-12 18:27 Sowjanya Komatineni
@ 2019-02-12 18:32 ` Sowjanya Komatineni
  2019-02-12 18:42   ` Dmitry Osipenko
  0 siblings, 1 reply; 23+ messages in thread
From: Sowjanya Komatineni @ 2019-02-12 18:32 UTC (permalink / raw)
  To: thierry.reding, Jonathan Hunter, Mantravadi Karthik,
	Shardar Mohammed, Timo Alho
  Cc: wsa, peda, digetx, linux-tegra, linux-kernel, linux-i2c

Please ignore all Patch V19 series. Will resend.

Dmitry/Thierry
I am using below stable tags in commit message based on V18 feedback to get patch applied to old kernels
Git send email considers whole text after Cc as email address and reports badly formatted address.

Is there any format that I should follow to specify kernel versions along with stable tag?

Cc: stable@vger.kernel.org # 4.4+
Cc: stable@vger.kernel.org # 4.20+

Thanks
Sowjanya

^ permalink raw reply	[flat|nested] 23+ messages in thread

* [PATCH V19 1/7] i2c: tegra: sort all the include headers alphabetically
@ 2019-02-12 18:28 Sowjanya Komatineni
  0 siblings, 0 replies; 23+ messages in thread
From: Sowjanya Komatineni @ 2019-02-12 18:28 UTC (permalink / raw)
  To: thierry.reding, jonathanh, mkarthik, smohammed, talho
  Cc: wsa, peda, digetx, linux-tegra, linux-kernel, linux-i2c,
	Sowjanya Komatineni

This patch sorts all the include headers alphabetically for the
I2C Tegra driver.

Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
 [V9/V10/V11/V12/V13/V14/V15/V16/V17/V18/V19] : Rebased to 5.0-rc4
 [V3/V4/V5/V7/V8] : Removed unsued headers in tegra I2C
 [V2] 		  : Added this in V2 to sort the headers in tegra I2C



 drivers/i2c/busses/i2c-tegra.c | 19 ++++++++-----------
 1 file changed, 8 insertions(+), 11 deletions(-)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index c77adbbea0c7..79c6aa87499b 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -6,24 +6,21 @@
  * Author: Colin Cross <ccross@android.com>
  */
 
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/i2c.h>
-#include <linux/io.h>
+#include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/of_device.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/reset.h>
+#include <linux/of_device.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
-#include <linux/iopoll.h>
-
-#include <asm/unaligned.h>
+#include <linux/reset.h>
 
 #define TEGRA_I2C_TIMEOUT (msecs_to_jiffies(1000))
 #define BYTES_PER_FIFO_WORD 4
-- 
2.7.4


^ permalink raw reply	[flat|nested] 23+ messages in thread

* [PATCH V19 1/7] i2c: tegra: sort all the include headers alphabetically
@ 2019-02-12 18:27 Sowjanya Komatineni
  2019-02-12 18:32 ` Sowjanya Komatineni
  0 siblings, 1 reply; 23+ messages in thread
From: Sowjanya Komatineni @ 2019-02-12 18:27 UTC (permalink / raw)
  To: thierry.reding, jonathanh, mkarthik, smohammed, talho
  Cc: wsa, peda, digetx, linux-tegra, linux-kernel, linux-i2c,
	Sowjanya Komatineni

This patch sorts all the include headers alphabetically for the
I2C Tegra driver.

Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
 [V9/V10/V11/V12/V13/V14/V15/V16/V17/V18/V19] : Rebased to 5.0-rc4
 [V3/V4/V5/V7/V8] : Removed unsued headers in tegra I2C
 [V2] 		  : Added this in V2 to sort the headers in tegra I2C



 drivers/i2c/busses/i2c-tegra.c | 19 ++++++++-----------
 1 file changed, 8 insertions(+), 11 deletions(-)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index c77adbbea0c7..79c6aa87499b 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -6,24 +6,21 @@
  * Author: Colin Cross <ccross@android.com>
  */
 
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/i2c.h>
-#include <linux/io.h>
+#include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/of_device.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/reset.h>
+#include <linux/of_device.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
-#include <linux/iopoll.h>
-
-#include <asm/unaligned.h>
+#include <linux/reset.h>
 
 #define TEGRA_I2C_TIMEOUT (msecs_to_jiffies(1000))
 #define BYTES_PER_FIFO_WORD 4
-- 
2.7.4


^ permalink raw reply	[flat|nested] 23+ messages in thread

end of thread, other threads:[~2019-02-20 18:05 UTC | newest]

Thread overview: 23+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-02-12 19:06 [PATCH V19 1/7] i2c: tegra: sort all the include headers alphabetically Sowjanya Komatineni
2019-02-12 19:06 ` [PATCH V19 2/7] i2c: tegra: add bus clear Master Support Sowjanya Komatineni
2019-02-12 19:06 ` [PATCH V19 3/7] i2c: tegra: fix maximum transfer size Sowjanya Komatineni
2019-02-12 19:06 ` [PATCH V19 4/7] i2c: tegra: update " Sowjanya Komatineni
2019-02-12 19:06 ` [PATCH V19 5/7] i2c: tegra: Add DMA support Sowjanya Komatineni
2019-02-14 16:53   ` Wolfram Sang
2019-02-20 18:02   ` Jon Hunter
2019-02-20 18:05     ` Dmitry Osipenko
2019-02-12 19:06 ` [PATCH V19 6/7] i2c: tegra: update transfer timeout Sowjanya Komatineni
2019-02-12 19:06 ` [PATCH V19 7/7] i2c: tegra: add i2c interface timing support Sowjanya Komatineni
2019-02-12 21:00 ` [PATCH V19 1/7] i2c: tegra: sort all the include headers alphabetically Peter Rosin
2019-02-12 21:15   ` Dmitry Osipenko
2019-02-13  8:35     ` Wolfram Sang
2019-02-13 13:13       ` Dmitry Osipenko
2019-02-13 14:55         ` Wolfram Sang
2019-02-13 23:45           ` Sowjanya Komatineni
2019-02-14 16:51             ` Wolfram Sang
2019-02-14 16:51 ` Wolfram Sang
  -- strict thread matches above, loose matches on Subject: below --
2019-02-12 18:28 Sowjanya Komatineni
2019-02-12 18:27 Sowjanya Komatineni
2019-02-12 18:32 ` Sowjanya Komatineni
2019-02-12 18:42   ` Dmitry Osipenko
2019-02-12 18:45     ` Sowjanya Komatineni

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).