LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH v3 0/2] i2c: designware: Add support for a bus clock
@ 2019-02-20 13:25 Gareth Williams
2019-02-20 13:42 ` Gareth Williams
0 siblings, 1 reply; 3+ messages in thread
From: Gareth Williams @ 2019-02-20 13:25 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Alexandre Belloni, Wolfram Sang,
Jarkko Nikula, Andy Shevchenko, Mika Westerberg
Cc: Gareth Williams, devicetree, linux-i2c, linux-renesas-soc, linux-kernel
The Synopsys I2C Controller has a bus clock that some SoCs require to access
the registers. This series also details the new clock property in the bindings
documentation.
v3:
- busclk renamed to pclk.
- Added comment with dw_i2c_dev struct definition describing pclk.
- Added enable rollback of first clock if second fails to enable.
- Changed clocks and clock-names sections to use term "peripheral clock"
(pclk) instead of "bus clock" (busclk) in dt-bindings documentation.
v2:
- Use new devm_clk_get_optional() function as it simplifies handling when
the optional clock is not present.
Phil Edworthy (2):
dt: snps,designware-i2c: Add clock bindings documentation
i2c: designware: Add support for a bus clock
.../devicetree/bindings/i2c/i2c-designware.txt | 9 +++++++++
drivers/i2c/busses/i2c-designware-common.c | 18 ++++++++++++++++--
drivers/i2c/busses/i2c-designware-core.h | 2 ++
drivers/i2c/busses/i2c-designware-platdrv.c | 5 +++++
4 files changed, 32 insertions(+), 2 deletions(-)
--
2.7.4
^ permalink raw reply [flat|nested] 3+ messages in thread
* RE: [PATCH v3 0/2] i2c: designware: Add support for a bus clock
2019-02-20 13:25 [PATCH v3 0/2] i2c: designware: Add support for a bus clock Gareth Williams
@ 2019-02-20 13:42 ` Gareth Williams
0 siblings, 0 replies; 3+ messages in thread
From: Gareth Williams @ 2019-02-20 13:42 UTC (permalink / raw)
To: Gareth Williams, Rob Herring, Mark Rutland, Alexandre Belloni,
Wolfram Sang, Jarkko Nikula, Andy Shevchenko, Mika Westerberg
Cc: devicetree, linux-i2c, linux-renesas-soc, linux-kernel
Sorry, the email below was sent prematurely and will be resent shortly.
-Gareth
> On 20 February 2019 13:26 Gareth Williams wrote:
> The Synopsys I2C Controller has a bus clock that some SoCs require to access
> the registers. This series also details the new clock property in the bindings
> documentation.
>
> v3:
> - busclk renamed to pclk.
> - Added comment with dw_i2c_dev struct definition describing pclk.
> - Added enable rollback of first clock if second fails to enable.
> - Changed clocks and clock-names sections to use term "peripheral clock"
> (pclk) instead of "bus clock" (busclk) in dt-bindings documentation.
> v2:
> - Use new devm_clk_get_optional() function as it simplifies handling when
> the optional clock is not present.
>
> Phil Edworthy (2):
> dt: snps,designware-i2c: Add clock bindings documentation
> i2c: designware: Add support for a bus clock
>
> .../devicetree/bindings/i2c/i2c-designware.txt | 9 +++++++++
> drivers/i2c/busses/i2c-designware-common.c | 18
> ++++++++++++++++--
> drivers/i2c/busses/i2c-designware-core.h | 2 ++
> drivers/i2c/busses/i2c-designware-platdrv.c | 5 +++++
> 4 files changed, 32 insertions(+), 2 deletions(-)
>
> --
> 2.7.4
Renesas Electronics Europe GmbH,Geschaeftsfuehrer/President : Michael Hannawald, Sitz der Gesellschaft/Registered office: Duesseldorf, Arcadiastrasse 10, 40472 Duesseldorf, Germany,Handelsregister/Commercial Register: Duesseldorf, HRB 3708 USt-IDNr./Tax identification no.: DE 119353406 WEEE-Reg.-Nr./WEEE reg. no.: DE 14978647
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH v3 0/2] i2c: designware: Add support for a bus clock
@ 2019-02-20 15:50 Gareth Williams
0 siblings, 0 replies; 3+ messages in thread
From: Gareth Williams @ 2019-02-20 15:50 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Alexandre Belloni, Wolfram Sang,
Jarkko Nikula, Andy Shevchenko, Mika Westerberg
Cc: Gareth Williams, devicetree, linux-i2c, linux-renesas-soc, linux-kernel
The Synopsys I2C Controller has a bus clock that some SoCs require to access
the registers. This series also details the new clock property in the bindings
documentation.
v3:
- busclk renamed to pclk.
- Added comment with dw_i2c_dev struct definition describing pclk.
- Added enable rollback of first clock if second fails to enable.
- Changed clocks and clock-names sections to use term "peripheral clock"
(pclk) instead of "bus clock" (busclk) in dt-bindings documentation.
v2:
- Use new devm_clk_get_optional() function as it simplifies handling when
the optional clock is not present.
Phil Edworthy (2):
dt: snps,designware-i2c: Add clock bindings documentation
i2c: designware: Add support for a bus clock
.../devicetree/bindings/i2c/i2c-designware.txt | 9 +++++++++
drivers/i2c/busses/i2c-designware-common.c | 18 ++++++++++++++++--
drivers/i2c/busses/i2c-designware-core.h | 2 ++
drivers/i2c/busses/i2c-designware-platdrv.c | 5 +++++
4 files changed, 32 insertions(+), 2 deletions(-)
--
2.7.4
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-02-20 15:53 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-02-20 13:25 [PATCH v3 0/2] i2c: designware: Add support for a bus clock Gareth Williams
2019-02-20 13:42 ` Gareth Williams
2019-02-20 15:50 Gareth Williams
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).