LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Jacob Pan <jacob.jun.pan@linux.intel.com>
To: iommu@lists.linux-foundation.org,
	LKML <linux-kernel@vger.kernel.org>,
	Joerg Roedel <joro@8bytes.org>,
	David Woodhouse <dwmw2@infradead.org>,
	Eric Auger <eric.auger@redhat.com>,
	Alex Williamson <alex.williamson@redhat.com>,
	Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Cc: "Yi Liu" <yi.l.liu@intel.com>,
	"Tian, Kevin" <kevin.tian@intel.com>,
	Raj Ashok <ashok.raj@intel.com>,
	"Christoph Hellwig" <hch@infradead.org>,
	"Lu Baolu" <baolu.lu@linux.intel.com>,
	Andriy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Jacob Pan <jacob.jun.pan@linux.intel.com>,
	Liu@vger.kernel.org, Yi L <yi.l.liu@linux.intel.com>
Subject: [PATCH v3 12/16] iommu/vt-d: Add nested translation helper function
Date: Fri,  3 May 2019 15:32:13 -0700
Message-ID: <1556922737-76313-13-git-send-email-jacob.jun.pan@linux.intel.com> (raw)
In-Reply-To: <1556922737-76313-1-git-send-email-jacob.jun.pan@linux.intel.com>

Nested translation mode is supported in VT-d 3.0 Spec.CH 3.8.
With PASID granular translation type set to 0x11b, translation
result from the first level(FL) also subject to a second level(SL)
page table translation. This mode is used for SVA virtualization,
where FL performs guest virtual to guest physical translation and
SL performs guest physical to host physical translation.

Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Liu, Yi L <yi.l.liu@linux.intel.com>
---
 drivers/iommu/intel-pasid.c | 93 +++++++++++++++++++++++++++++++++++++++++++++
 drivers/iommu/intel-pasid.h | 11 ++++++
 2 files changed, 104 insertions(+)

diff --git a/drivers/iommu/intel-pasid.c b/drivers/iommu/intel-pasid.c
index dde05b5..d8421f7 100644
--- a/drivers/iommu/intel-pasid.c
+++ b/drivers/iommu/intel-pasid.c
@@ -682,3 +682,96 @@ int intel_pasid_setup_pass_through(struct intel_iommu *iommu,
 
 	return 0;
 }
+
+/**
+ * intel_pasid_setup_nested() - Set up PASID entry for nested translation
+ * which is used for vSVA. The first level page tables are used for
+ * GVA-GPA translation in the guest, second level page tables are used
+ * for GPA to HPA translation.
+ *
+ * @iommu:      Iommu which the device belong to
+ * @dev:        Device to be set up for translation
+ * @gpgd:       FLPTPTR: First Level Page translation pointer in GPA
+ * @pasid:      PASID to be programmed in the device PASID table
+ * @flags:      Additional info such as supervisor PASID
+ * @domain:     Domain info for setting up second level page tables
+ * @addr_width: Address width of the first level (guest)
+ */
+int intel_pasid_setup_nested(struct intel_iommu *iommu,
+			struct device *dev, pgd_t *gpgd,
+			int pasid, int flags,
+			struct dmar_domain *domain,
+			int addr_width)
+{
+	struct pasid_entry *pte;
+	struct dma_pte *pgd;
+	u64 pgd_val;
+	int agaw;
+	u16 did;
+
+	if (!ecap_nest(iommu->ecap)) {
+		pr_err("IOMMU: %s: No nested translation support\n",
+		       iommu->name);
+		return -EINVAL;
+	}
+
+	pte = intel_pasid_get_entry(dev, pasid);
+	if (WARN_ON(!pte))
+		return -EINVAL;
+
+	pasid_clear_entry(pte);
+
+	/* Sanity checking performed by caller to make sure address
+	 * width matching in two dimensions:
+	 * 1. CPU vs. IOMMU
+	 * 2. Guest vs. Host.
+	 */
+	switch (addr_width) {
+	case 57:
+		pasid_set_flpm(pte, 1);
+		break;
+	case 48:
+		pasid_set_flpm(pte, 0);
+		break;
+	default:
+		dev_err(dev, "Invalid paging mode %d\n", addr_width);
+		return -EINVAL;
+	}
+
+	/* Setup the first level page table pointer in GPA */
+	pasid_set_flptr(pte, (u64)gpgd);
+	if (flags & PASID_FLAG_SUPERVISOR_MODE) {
+		if (!ecap_srs(iommu->ecap)) {
+			pr_err("No supervisor request support on %s\n",
+			       iommu->name);
+			return -EINVAL;
+		}
+		pasid_set_sre(pte);
+	}
+
+	/* Setup the second level based on the given domain */
+	pgd = domain->pgd;
+
+	for (agaw = domain->agaw; agaw != iommu->agaw; agaw--) {
+		pgd = phys_to_virt(dma_pte_addr(pgd));
+		if (!dma_pte_present(pgd)) {
+			dev_err(dev, "Invalid domain page table\n");
+			return -EINVAL;
+		}
+	}
+	pgd_val = virt_to_phys(pgd);
+	pasid_set_slptr(pte, pgd_val);
+	pasid_set_fault_enable(pte);
+
+	did = domain->iommu_did[iommu->seq_id];
+	pasid_set_domain_id(pte, did);
+
+	pasid_set_address_width(pte, agaw);
+	pasid_set_page_snoop(pte, !!ecap_smpwc(iommu->ecap));
+
+	pasid_set_translation_type(pte, PASID_ENTRY_PGTT_NESTED);
+	pasid_set_present(pte);
+	pasid_flush_caches(iommu, pte, pasid, did);
+
+	return 0;
+}
diff --git a/drivers/iommu/intel-pasid.h b/drivers/iommu/intel-pasid.h
index 4b26ab5..2234fd5 100644
--- a/drivers/iommu/intel-pasid.h
+++ b/drivers/iommu/intel-pasid.h
@@ -42,6 +42,7 @@
  * to vmalloc or even module mappings.
  */
 #define PASID_FLAG_SUPERVISOR_MODE	BIT(0)
+#define PASID_FLAG_NESTED		BIT(1)
 
 struct pasid_dir_entry {
 	u64 val;
@@ -51,6 +52,11 @@ struct pasid_entry {
 	u64 val[8];
 };
 
+#define PASID_ENTRY_PGTT_FL_ONLY	(1)
+#define PASID_ENTRY_PGTT_SL_ONLY	(2)
+#define PASID_ENTRY_PGTT_NESTED		(3)
+#define PASID_ENTRY_PGTT_PT		(4)
+
 /* The representative of a PASID table */
 struct pasid_table {
 	void			*table;		/* pasid table pointer */
@@ -77,6 +83,11 @@ int intel_pasid_setup_second_level(struct intel_iommu *iommu,
 int intel_pasid_setup_pass_through(struct intel_iommu *iommu,
 				   struct dmar_domain *domain,
 				   struct device *dev, int pasid);
+int intel_pasid_setup_nested(struct intel_iommu *iommu,
+			struct device *dev, pgd_t *pgd,
+			int pasid, int flags,
+			struct dmar_domain *domain,
+			int addr_width);
 void intel_pasid_tear_down_entry(struct intel_iommu *iommu,
 				 struct device *dev, int pasid);
 int vcmd_alloc_pasid(struct intel_iommu *iommu, unsigned int *pasid);
-- 
2.7.4


  parent reply index

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-03 22:32 [PATCH v3 00/16] Shared virtual address IOMMU and VT-d support Jacob Pan
2019-05-03 22:32 ` [PATCH v3 01/16] iommu: Introduce attach/detach_pasid_table API Jacob Pan
2019-05-03 22:32 ` [PATCH v3 02/16] iommu: Introduce cache_invalidate API Jacob Pan
2019-05-13  9:14   ` Auger Eric
2019-05-13 11:20     ` Jean-Philippe Brucker
2019-05-13 16:50       ` Auger Eric
2019-05-13 17:09         ` Jean-Philippe Brucker
2019-05-13 22:16           ` Jacob Pan
2019-05-14  7:36             ` Auger Eric
2019-05-14 10:41               ` Jean-Philippe Brucker
2019-05-14 17:44                 ` Jacob Pan
2019-05-14 17:57                   ` Jacob Pan
2019-05-15 11:03                   ` Jean-Philippe Brucker
2019-05-15 14:47                     ` Tian, Kevin
2019-05-15 15:25                       ` Jean-Philippe Brucker
2019-05-14  7:46           ` Auger Eric
2019-05-14 10:42             ` Jean-Philippe Brucker
2019-05-14 11:02               ` Auger Eric
2019-05-14 17:55                 ` Jacob Pan
2019-05-15 15:52                   ` Jean-Philippe Brucker
2019-05-15 16:25                     ` Jacob Pan
2019-05-03 22:32 ` [PATCH v3 03/16] iommu: Add I/O ASID allocator Jacob Pan
2019-05-21  8:21   ` Auger Eric
2019-05-21 17:03     ` Jacob Pan
2019-05-22 12:19       ` Jean-Philippe Brucker
2019-05-21  9:41   ` Auger Eric
2019-05-21 17:05     ` Jacob Pan
2019-05-03 22:32 ` [PATCH v3 04/16] ioasid: Add custom IOASID allocator Jacob Pan
2019-05-21  9:55   ` Auger Eric
2019-05-22 19:42     ` Jacob Pan
2019-05-23  7:14       ` Auger Eric
2019-05-23 15:40         ` Jacob Pan
2019-05-03 22:32 ` [PATCH v3 05/16] iommu/vt-d: Enlightened PASID allocation Jacob Pan
2019-05-03 22:32 ` [PATCH v3 06/16] iommu/vt-d: Add custom allocator for IOASID Jacob Pan
2019-05-03 22:32 ` [PATCH v3 07/16] iommu/vtd: Optimize tlb invalidation for vIOMMU Jacob Pan
2019-05-03 22:32 ` [PATCH v3 08/16] iommu/vt-d: Replace Intel specific PASID allocator with IOASID Jacob Pan
2019-05-03 22:32 ` [PATCH v3 09/16] iommu: Introduce guest PASID bind function Jacob Pan
2019-05-16 14:14   ` Jean-Philippe Brucker
2019-05-16 16:14     ` Jacob Pan
2019-05-20 19:22       ` Jacob Pan
2019-05-21 16:09         ` Jean-Philippe Brucker
2019-05-21 22:50           ` Jacob Pan
2019-05-22 15:05             ` Jean-Philippe Brucker
2019-05-22 17:15               ` Jacob Pan
2019-05-03 22:32 ` [PATCH v3 10/16] iommu/vt-d: Move domain helper to header Jacob Pan
2019-05-03 22:32 ` [PATCH v3 11/16] iommu/vt-d: Avoid duplicated code for PASID setup Jacob Pan
2019-05-03 22:32 ` Jacob Pan [this message]
2019-05-03 22:32 ` [PATCH v3 13/16] iommu/vt-d: Clean up for SVM device list Jacob Pan
2019-05-03 22:32 ` [PATCH v3 14/16] iommu/vt-d: Add bind guest PASID support Jacob Pan
2019-05-03 22:32 ` [PATCH v3 15/16] iommu/vt-d: Support flushing more translation cache types Jacob Pan
2019-05-03 22:32 ` [PATCH v3 16/16] iommu/vt-d: Add svm/sva invalidate function Jacob Pan
2019-05-15 16:31 ` [PATCH v3 00/16] Shared virtual address IOMMU and VT-d support Jacob Pan

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1556922737-76313-13-git-send-email-jacob.jun.pan@linux.intel.com \
    --to=jacob.jun.pan@linux.intel.com \
    --cc=Liu@vger.kernel.org \
    --cc=alex.williamson@redhat.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=ashok.raj@intel.com \
    --cc=baolu.lu@linux.intel.com \
    --cc=dwmw2@infradead.org \
    --cc=eric.auger@redhat.com \
    --cc=hch@infradead.org \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jean-philippe.brucker@arm.com \
    --cc=joro@8bytes.org \
    --cc=kevin.tian@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=yi.l.liu@intel.com \
    --cc=yi.l.liu@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lkml.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lkml.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lkml.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lkml.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lkml.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lkml.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lkml.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lkml.kernel.org/lkml/7 lkml/git/7.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lkml.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git