LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Jim Lin <jilin@nvidia.com>
To: <gregkh@linuxfoundation.org>, <mathias.nyman@intel.com>,
	<stern@rowland.harvard.edu>, <hminas@synopsys.com>,
	<kai.heng.feng@canonical.com>, <drinkcat@chromium.org>,
	<prime.zeng@hisilicon.com>, <malat@debian.org>,
	<nsaenzjulienne@suse.de>, <jflat@chromium.org>,
	<linus.walleij@linaro.org>, <clabbe@baylibre.com>,
	<colin.king@canonical.com>
Cc: <linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Jim Lin <jilin@nvidia.com>
Subject: [PATCH v4 1/1] usb: xhci: Add Clear_TT_Buffer
Date: Mon, 6 May 2019 22:34:22 +0800	[thread overview]
Message-ID: <1557153262-22972-1-git-send-email-jilin@nvidia.com> (raw)

USB 2.0 specification chapter 11.17.5 says "as part of endpoint halt
processing for full-/low-speed endpoints connected via a TT, the host
software must use the Clear_TT_Buffer request to the TT to ensure
that the buffer is not in the busy state".

In our case, a full-speed speaker (ConferenceCam) is behind a high-
speed hub (ConferenceCam Connect), sometimes once we get STALL on a
request we may continue to get STALL with the folllowing requests,
like Set_Interface.

Here we add Clear_TT_Buffer for the following Set_Interface requests
to get ACK successfully.

Originally usb_hub_clear_tt_buffer uses urb->dev->devnum as device
address while sending Clear_TT_Buffer command, but this doesn't work
for XHCI.
We have to extend usb_hub_clear_tt_buffer parameter to specify device
number that will have the TT state of its hub cleared.

Signed-off-by: Jim Lin <jilin@nvidia.com>
---
v2: xhci_clear_tt_buffer_complete: add static, shorter indentation
    , remove its claiming in xhci.h
v3: Add description for clearing_tt (xhci.h)
v4: Remove clearing_tt flag because hub_tt_work has hub->tt.lock
    to protect for Clear_TT_Buffer to be run serially.
    Remove xhci_clear_tt_buffer_complete as it's not necessary.
    Same reason as the above.
    Extend usb_hub_clear_tt_buffer parameter

 drivers/usb/core/hub.c            |  5 +++--
 drivers/usb/dwc2/hcd_intr.c       |  2 +-
 drivers/usb/host/ehci-q.c         |  2 +-
 drivers/usb/host/fotg210-hcd.c    |  2 +-
 drivers/usb/host/xhci-ring.c      | 22 ++++++++++++++++++++++
 drivers/usb/isp1760/isp1760-hcd.c |  5 +++--
 include/linux/usb/hcd.h           |  2 +-
 7 files changed, 32 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 15a2934dc29d..4dec054c9776 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -840,6 +840,7 @@ int usb_hub_set_port_power(struct usb_device *hdev, struct usb_hub *hub,
 /**
  * usb_hub_clear_tt_buffer - clear control/bulk TT state in high speed hub
  * @urb: an URB associated with the failed or incomplete split transaction
+ * @devnum : device number that will have the TT state of its hub cleared
  *
  * High speed HCDs use this to tell the hub driver that some split control or
  * bulk transaction failed in a way that requires clearing internal state of
@@ -851,7 +852,7 @@ int usb_hub_set_port_power(struct usb_device *hdev, struct usb_hub *hub,
  *
  * Return: 0 if successful. A negative error code otherwise.
  */
-int usb_hub_clear_tt_buffer(struct urb *urb)
+int usb_hub_clear_tt_buffer(struct urb *urb, int devnum)
 {
 	struct usb_device	*udev = urb->dev;
 	int			pipe = urb->pipe;
@@ -873,7 +874,7 @@ int usb_hub_clear_tt_buffer(struct urb *urb)
 	/* info that CLEAR_TT_BUFFER needs */
 	clear->tt = tt->multi ? udev->ttport : 1;
 	clear->devinfo = usb_pipeendpoint (pipe);
-	clear->devinfo |= udev->devnum << 4;
+	clear->devinfo |= devnum << 4;
 	clear->devinfo |= usb_pipecontrol(pipe)
 			? (USB_ENDPOINT_XFER_CONTROL << 11)
 			: (USB_ENDPOINT_XFER_BULK << 11);
diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c
index 88b5dcf3aefc..a3bb6911a62a 100644
--- a/drivers/usb/dwc2/hcd_intr.c
+++ b/drivers/usb/dwc2/hcd_intr.c
@@ -125,7 +125,7 @@ static void dwc2_hc_handle_tt_clear(struct dwc2_hsotg *hsotg,
 
 	if (qtd->urb->status != -EPIPE && qtd->urb->status != -EREMOTEIO) {
 		chan->qh->tt_buffer_dirty = 1;
-		if (usb_hub_clear_tt_buffer(usb_urb))
+		if (usb_hub_clear_tt_buffer(usb_urb, usb_urb->dev->devnum))
 			/* Clear failed; let's hope things work anyway */
 			chan->qh->tt_buffer_dirty = 0;
 	}
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index aa2f77f1506d..9f64c260239e 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -169,7 +169,7 @@ static void ehci_clear_tt_buffer(struct ehci_hcd *ehci, struct ehci_qh *qh,
 		if (!ehci_is_TDI(ehci)
 				|| urb->dev->tt->hub !=
 				   ehci_to_hcd(ehci)->self.root_hub) {
-			if (usb_hub_clear_tt_buffer(urb) == 0)
+			if (!usb_hub_clear_tt_buffer(urb, urb->dev->devnum))
 				qh->clearing_tt = 1;
 		} else {
 
diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c
index 0da68df259c8..bd29ed0fbd46 100644
--- a/drivers/usb/host/fotg210-hcd.c
+++ b/drivers/usb/host/fotg210-hcd.c
@@ -2123,7 +2123,7 @@ static void fotg210_clear_tt_buffer(struct fotg210_hcd *fotg210,
 
 		if (urb->dev->tt->hub !=
 				fotg210_to_hcd(fotg210)->self.root_hub) {
-			if (usb_hub_clear_tt_buffer(urb) == 0)
+			if (!usb_hub_clear_tt_buffer(urb, urb->dev->devnum))
 				qh->clearing_tt = 1;
 		}
 	}
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 9215a28dad40..aa2a21e6cde3 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1786,6 +1786,27 @@ struct xhci_segment *trb_in_td(struct xhci_hcd *xhci,
 	return NULL;
 }
 
+static void xhci_clear_hub_tt_buffer(struct xhci_hcd *xhci,
+	unsigned int slot_id, struct xhci_td *td)
+{
+	struct xhci_virt_device *dev;
+	struct xhci_slot_ctx *slot_ctx;
+	int devnum;
+
+	/*
+	 * As part of low/full-speed endpoint-halt processing
+	 * we must clear the TT buffer (USB 2.0 specification 11.17.5).
+	 */
+	if (td->urb->dev->tt && !usb_pipeint(td->urb->pipe) &&
+	    (td->urb->dev->tt->hub != xhci_to_hcd(xhci)->self.root_hub)) {
+		dev = xhci->devs[slot_id];
+		slot_ctx = xhci_get_slot_ctx(xhci, dev->out_ctx);
+		devnum = (int) le32_to_cpu(slot_ctx->dev_state) &
+			DEV_ADDR_MASK;
+		usb_hub_clear_tt_buffer(td->urb, devnum);
+	}
+}
+
 static void xhci_cleanup_halted_endpoint(struct xhci_hcd *xhci,
 		unsigned int slot_id, unsigned int ep_index,
 		unsigned int stream_id, struct xhci_td *td,
@@ -1804,6 +1825,7 @@ static void xhci_cleanup_halted_endpoint(struct xhci_hcd *xhci,
 	if (reset_type == EP_HARD_RESET) {
 		ep->ep_state |= EP_HARD_CLEAR_TOGGLE;
 		xhci_cleanup_stalled_ring(xhci, ep_index, stream_id, td);
+		xhci_clear_hub_tt_buffer(xhci, slot_id, td);
 	}
 	xhci_ring_cmd_db(xhci);
 }
diff --git a/drivers/usb/isp1760/isp1760-hcd.c b/drivers/usb/isp1760/isp1760-hcd.c
index 8142c6b4c4cf..f1d68092becb 100644
--- a/drivers/usb/isp1760/isp1760-hcd.c
+++ b/drivers/usb/isp1760/isp1760-hcd.c
@@ -1166,7 +1166,8 @@ static void handle_done_ptds(struct usb_hcd *hcd)
 					(qtd->urb->status != -EPIPE) &&
 					(qtd->urb->status != -EREMOTEIO)) {
 				qh->tt_buffer_dirty = 1;
-				if (usb_hub_clear_tt_buffer(qtd->urb))
+				if (usb_hub_clear_tt_buffer(qtd->urb,
+						qtd->urb->dev->devnum))
 					/* Clear failed; let's hope things work
 					   anyway */
 					qh->tt_buffer_dirty = 0;
@@ -1633,7 +1634,7 @@ static void dequeue_urb_from_qtd(struct usb_hcd *hcd, struct isp1760_qh *qh,
 
 	if ((urb->dev->speed != USB_SPEED_HIGH) && urb_was_running) {
 		qh->tt_buffer_dirty = 1;
-		if (usb_hub_clear_tt_buffer(urb))
+		if (usb_hub_clear_tt_buffer(urb, urb->dev->devnum))
 			/* Clear failed; let's hope things work anyway */
 			qh->tt_buffer_dirty = 0;
 	}
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 695931b03684..01720f1f7d62 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -559,7 +559,7 @@ struct usb_tt_clear {
 	struct usb_host_endpoint	*ep;
 };
 
-extern int usb_hub_clear_tt_buffer(struct urb *urb);
+extern int usb_hub_clear_tt_buffer(struct urb *urb, int devnum);
 extern void usb_ep0_reinit(struct usb_device *);
 
 /* (shifted) direction/type/recipient from the USB 2.0 spec, table 9.2 */
-- 
2.1.4


             reply	other threads:[~2019-05-06 14:34 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-06 14:34 Jim Lin [this message]
2019-05-06 14:57 ` Alan Stern
2019-05-07  8:00   ` Mathias Nyman
2019-05-07 14:29     ` Alan Stern
2019-05-08 10:21       ` Mathias Nyman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1557153262-22972-1-git-send-email-jilin@nvidia.com \
    --to=jilin@nvidia.com \
    --cc=clabbe@baylibre.com \
    --cc=colin.king@canonical.com \
    --cc=drinkcat@chromium.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=hminas@synopsys.com \
    --cc=jflat@chromium.org \
    --cc=kai.heng.feng@canonical.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=malat@debian.org \
    --cc=mathias.nyman@intel.com \
    --cc=nsaenzjulienne@suse.de \
    --cc=prime.zeng@hisilicon.com \
    --cc=stern@rowland.harvard.edu \
    --subject='Re: [PATCH v4 1/1] usb: xhci: Add Clear_TT_Buffer' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).