LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH v6 0/9] Introduce STMFX I2C Multi-Function eXpander
@ 2019-05-09  8:58 Amelie Delaunay
  2019-05-09  8:58 ` [PATCH v6 1/9] dt-bindings: mfd: Add ST Multi-Function eXpander (STMFX) core bindings Amelie Delaunay
                   ` (10 more replies)
  0 siblings, 11 replies; 18+ messages in thread
From: Amelie Delaunay @ 2019-05-09  8:58 UTC (permalink / raw)
  To: Lee Jones, Linus Walleij, Rob Herring, Mark Rutland,
	Alexandre Torgue, Maxime Coquelin
  Cc: linux-gpio, linux-kernel, devicetree, linux-arm-kernel,
	linux-stm32, Amelie Delaunay

This series adds support for STMicroelectronics Multi-Function eXpander
(STMFX), used on some STM32 discovery and evaluation boards.

STMFX is an STM32L152 slave controller whose firmware embeds the following
features:
- I/O expander (16 GPIOs + 8 extra if the other features are not enabled),
- resistive touchscreen controller,
- IDD measurement.

I2C stuff and chip initialization is based on an MFD parent driver, which
registers STMFX features MFD children.

---
Changes in v6:
- mfd: go with Lee's suggestion about vdd regulator management (but
initialize ret with PTR_ERR_OR_ZERO to use it in if/else if and error log),
also remove backup/restore helpers and move the code in suspend/
resume
Changes in v5:
- mfd: fix Lee's comments (reorder struct declaration, drop mfd cells
  platform data initialization, typos)
- pinctrl: get stmfx struct through dev_get_drvdata(pdev->dev.parent)
  instead of dev_get_platdata(&pdev->dev);
Changes in v4:
- mfd: move registers #define into the header
- mfd: merge stmfx and stmfx_ddata structures into one stmfx structure
- mfd: change stmfx_chip_init/exit and stmfx_irq_init/exit args: use
  i2c_client struct and i2c_get_clientdata
- mfd: fix typos
- mfd: add MFD cells for IDD and TS features
- pinctrl: rework registers #define
- dts: add STMFX support on stm32mp157c-ev1
Changes in v3:
- fix MFD interrupt bindings
- fix drivers/mfd/stmfx.c:103:8: warning: 'mask' may be used uninitialized
  in this function
Changes in v2:
- move to MFD parent driver for i2c stuff and chip initialization
- improve regmap configuration
- take advantage of the use of gpio-ranges

Amelie Delaunay (9):
  dt-bindings: mfd: Add ST Multi-Function eXpander (STMFX) core bindings
  mfd: Add ST Multi-Function eXpander (STMFX) core driver
  dt-bindings: pinctrl: document the STMFX pinctrl bindings
  pinctrl: Add STMFX GPIO expander Pinctrl/GPIO driver
  ARM: dts: stm32: add STMFX support on stm32746g-eval
  ARM: dts: stm32: add joystick support on stm32746g-eval
  ARM: dts: stm32: add orange and blue leds on stm32746g-eval
  ARM: dts: stm32: add STMFX support on stm32mp157c-ev1
  ARM: dts: stm32: add joystick support on stm32mp157c-ev1

 Documentation/devicetree/bindings/mfd/stmfx.txt    |  28 +
 .../devicetree/bindings/pinctrl/pinctrl-stmfx.txt  | 116 +++
 arch/arm/boot/dts/stm32746g-eval.dts               |  66 ++
 arch/arm/boot/dts/stm32mp157c-ev1.dts              |  60 ++
 drivers/mfd/Kconfig                                |  13 +
 drivers/mfd/Makefile                               |   2 +-
 drivers/mfd/stmfx.c                                | 545 ++++++++++++++
 drivers/pinctrl/Kconfig                            |  12 +
 drivers/pinctrl/Makefile                           |   1 +
 drivers/pinctrl/pinctrl-stmfx.c                    | 820 +++++++++++++++++++++
 include/linux/mfd/stmfx.h                          | 123 ++++
 11 files changed, 1785 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/stmfx.txt
 create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt
 create mode 100644 drivers/mfd/stmfx.c
 create mode 100644 drivers/pinctrl/pinctrl-stmfx.c
 create mode 100644 include/linux/mfd/stmfx.h

-- 
2.7.4


^ permalink raw reply	[flat|nested] 18+ messages in thread

end of thread, other threads:[~2019-05-21  8:13 UTC | newest]

Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-09  8:58 [PATCH v6 0/9] Introduce STMFX I2C Multi-Function eXpander Amelie Delaunay
2019-05-09  8:58 ` [PATCH v6 1/9] dt-bindings: mfd: Add ST Multi-Function eXpander (STMFX) core bindings Amelie Delaunay
2019-05-09  9:33   ` Lee Jones
2019-05-09  8:58 ` [PATCH v6 2/9] mfd: Add ST Multi-Function eXpander (STMFX) core driver Amelie Delaunay
2019-05-09  9:33   ` Lee Jones
2019-05-09  8:58 ` [PATCH v6 3/9] dt-bindings: pinctrl: document the STMFX pinctrl bindings Amelie Delaunay
2019-05-09  8:58 ` [PATCH v6 4/9] pinctrl: Add STMFX GPIO expander Pinctrl/GPIO driver Amelie Delaunay
2019-05-09  8:58 ` [PATCH v6 5/9] ARM: dts: stm32: add STMFX support on stm32746g-eval Amelie Delaunay
2019-05-09  8:58 ` [PATCH v6 6/9] ARM: dts: stm32: add joystick " Amelie Delaunay
2019-05-09  8:58 ` [PATCH v6 7/9] ARM: dts: stm32: add orange and blue leds " Amelie Delaunay
2019-05-09  8:58 ` [PATCH v6 8/9] ARM: dts: stm32: add STMFX support on stm32mp157c-ev1 Amelie Delaunay
2019-05-09  8:58 ` [PATCH v6 9/9] ARM: dts: stm32: add joystick " Amelie Delaunay
2019-05-10  7:23 ` [GIT PULL] Immutable branch between MFD and Pinctrl due for the v5.2 merge window Lee Jones
2019-05-10 15:15   ` Lee Jones
2019-05-10 15:19     ` [GIT PULL v2] " Lee Jones
2019-05-13  7:42       ` [GIT PULL v3] " Lee Jones
2019-05-13  7:43         ` Lee Jones
2019-05-21  8:13 ` [PATCH v6 0/9] Introduce STMFX I2C Multi-Function eXpander Alexandre Torgue

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).