LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Alexandre Torgue <alexandre.torgue@st.com>
To: Linus Walleij <linus.walleij@linaro.org>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: <linux-kernel@vger.kernel.org>, <linux-gpio@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	<alexandre.torgue@st.com>
Subject: [PATCH] pinctrl: stm32: add lock mechanism for irqmux selection
Date: Fri, 10 May 2019 09:43:03 +0200	[thread overview]
Message-ID: <1557474183-19719-1-git-send-email-alexandre.torgue@st.com> (raw)

GPIOs are split between several banks (A, B, ...) and each bank can have
up to 16 lines. Those GPIOs could be used as interrupt lines thanks to
exti lines. As there are only 16 exti lines, a mux is used to select which
gpio line is connected to which exti line. Mapping is done as follow:

-A0, B0, C0.. -->exti_line_0 (X0 selected by mux_0)
-A1, B1, C1.. -->exti_line_1 (X1 selected by mux_1)
...

This patch adds a protection to avoid overriding on mux_n for exti_line_n.

Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c
index 2317ccf..99e4149 100644
--- a/drivers/pinctrl/stm32/pinctrl-stm32.c
+++ b/drivers/pinctrl/stm32/pinctrl-stm32.c
@@ -98,6 +98,8 @@ struct stm32_pinctrl {
 	struct stm32_desc_pin *pins;
 	u32 npins;
 	u32 pkg;
+	u16 irqmux_map;
+	spinlock_t irqmux_lock;
 };
 
 static inline int stm32_gpio_pin(int gpio)
@@ -307,9 +309,53 @@ static int stm32_gpio_domain_activate(struct irq_domain *d,
 {
 	struct stm32_gpio_bank *bank = d->host_data;
 	struct stm32_pinctrl *pctl = dev_get_drvdata(bank->gpio_chip.parent);
+	unsigned long flags;
+	int ret = 0;
+
+	/*
+	 * gpio irq mux is shared between several banks, a lock has to be done
+	 * to avoid overriding.
+	 */
+	spin_lock_irqsave(&pctl->irqmux_lock, flags);
+	if (pctl->hwlock)
+		ret = hwspin_lock_timeout(pctl->hwlock, HWSPINLOCK_TIMEOUT);
+
+	if (ret) {
+		dev_err(pctl->dev, "Can't get hwspinlock\n");
+		goto unlock;
+	}
+
+	if (pctl->irqmux_map & BIT(irq_data->hwirq)) {
+		dev_err(pctl->dev, "irq line %ld already requested.\n",
+			irq_data->hwirq);
+		ret = -EBUSY;
+		if (pctl->hwlock)
+			hwspin_unlock(pctl->hwlock);
+		goto unlock;
+	} else {
+		pctl->irqmux_map |= BIT(irq_data->hwirq);
+	}
 
 	regmap_field_write(pctl->irqmux[irq_data->hwirq], bank->bank_ioport_nr);
-	return 0;
+
+	if (pctl->hwlock)
+		hwspin_unlock(pctl->hwlock);
+
+unlock:
+	spin_unlock_irqrestore(&pctl->irqmux_lock, flags);
+	return ret;
+}
+
+static void stm32_gpio_domain_deactivate(struct irq_domain *d,
+					 struct irq_data *irq_data)
+{
+	struct stm32_gpio_bank *bank = d->host_data;
+	struct stm32_pinctrl *pctl = dev_get_drvdata(bank->gpio_chip.parent);
+	unsigned long flags;
+
+	spin_lock_irqsave(&pctl->irqmux_lock, flags);
+	pctl->irqmux_map &= ~BIT(irq_data->hwirq);
+	spin_unlock_irqrestore(&pctl->irqmux_lock, flags);
 }
 
 static int stm32_gpio_domain_alloc(struct irq_domain *d,
@@ -338,6 +384,7 @@ static const struct irq_domain_ops stm32_gpio_domain_ops = {
 	.alloc          = stm32_gpio_domain_alloc,
 	.free           = irq_domain_free_irqs_common,
 	.activate	= stm32_gpio_domain_activate,
+	.deactivate	= stm32_gpio_domain_deactivate,
 };
 
 /* Pinctrl functions */
@@ -1290,6 +1337,8 @@ int stm32_pctl_probe(struct platform_device *pdev)
 		pctl->hwlock = hwspin_lock_request_specific(hwlock_id);
 	}
 
+	spin_lock_init(&pctl->irqmux_lock);
+
 	pctl->dev = dev;
 	pctl->match_data = match->data;
 
-- 
2.7.4


             reply	other threads:[~2019-05-10  7:43 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-10  7:43 Alexandre Torgue [this message]
2019-05-24 11:26 ` Linus Walleij
2019-05-24 12:27   ` Alexandre Torgue
2019-05-24 15:22     ` Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1557474183-19719-1-git-send-email-alexandre.torgue@st.com \
    --to=alexandre.torgue@st.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --subject='Re: [PATCH] pinctrl: stm32: add lock mechanism for irqmux selection' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).