[PATCH RESEND 1/5] ARM: dts: imx6qdl-sabresd: Assign corresponding power supply for LDOs

LKML Archive on lore.kernel.org
help / color / mirror / Atom feed

* [PATCH RESEND 1/5] ARM: dts: imx6qdl-sabresd: Assign corresponding power supply for LDOs
@ 2019-05-12  9:57 Anson Huang
  2019-05-12  9:57 ` [PATCH RESEND 2/5] ARM: dts: imx7d-sdb: " Anson Huang
                   ` (4 more replies)
  0 siblings, 5 replies; 8+ messages in thread
From: Anson Huang @ 2019-05-12  9:57 UTC (permalink / raw)
  To: robh+dt, mark.rutland, shawnguo, s.hauer, kernel, festevam,
	devicetree, linux-arm-kernel, linux-kernel
  Cc: dl-linux-imx

On i.MX6Q/DL SabreSD board, vgen5 supplies vdd1p1/vdd2p5 LDO and
sw2 supplies vdd3p0 LDO, this patch assigns corresponding power
supply for vdd1p1/vdd2p5/vdd3p0 to avoid confusion by below log:

vdd1p1: supplied by regulator-dummy
vdd3p0: supplied by regulator-dummy
vdd2p5: supplied by regulator-dummy

With this patch, the power supply is more accurate:

vdd1p1: supplied by VGEN5
vdd3p0: supplied by SW2
vdd2p5: supplied by VGEN5

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
No code change, just resend patch with correct encoding.
---
 arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 12 ++++++++++++
 arch/arm/boot/dts/imx6qdl.dtsi         |  6 +++---
 2 files changed, 15 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 185fb17..11103a4 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -745,6 +745,18 @@
        vin-supply = <&sw1c_reg>;
 };
 
+&reg_vdd1p1 {
+	vin-supply = <&vgen5_reg>;
+};
+
+&reg_vdd3p0 {
+	vin-supply = <&sw2_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&vgen5_reg>;
+};
+
 &snvs_poweroff {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 664f7b5..929fc7d 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -701,7 +701,7 @@
 					     <0 54 IRQ_TYPE_LEVEL_HIGH>,
 					     <0 127 IRQ_TYPE_LEVEL_HIGH>;
 
-				regulator-1p1 {
+				reg_vdd1p1: regulator-1p1 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd1p1";
 					regulator-min-microvolt = <1000000>;
@@ -716,7 +716,7 @@
 					anatop-enable-bit = <0>;
 				};
 
-				regulator-3p0 {
+				reg_vdd3p0: regulator-3p0 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd3p0";
 					regulator-min-microvolt = <2800000>;
@@ -731,7 +731,7 @@
 					anatop-enable-bit = <0>;
 				};
 
-				regulator-2p5 {
+				reg_vdd2p5: regulator-2p5 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd2p5";
 					regulator-min-microvolt = <2250000>;
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 8+ messages in thread

* [PATCH RESEND 2/5] ARM: dts: imx7d-sdb: Assign corresponding power supply for LDOs
  2019-05-12  9:57 [PATCH RESEND 1/5] ARM: dts: imx6qdl-sabresd: Assign corresponding power supply for LDOs Anson Huang
@ 2019-05-12  9:57 ` Anson Huang
  2019-05-28 19:24   ` Leonard Crestez
  2019-05-12  9:57 ` [PATCH RESEND 3/5] ARM: dts: imx6sl-evk: " Anson Huang
                   ` (3 subsequent siblings)
  4 siblings, 1 reply; 8+ messages in thread
From: Anson Huang @ 2019-05-12  9:57 UTC (permalink / raw)
  To: robh+dt, mark.rutland, shawnguo, s.hauer, kernel, festevam,
	devicetree, linux-arm-kernel, linux-kernel
  Cc: dl-linux-imx

On i.MX7D SDB board, sw2 supplies 1p0d/1p2 LDO, this patch assigns
corresponding power supply for 1p0d/1p2 LDO to avoid confusion by
below log:

vdd1p0d: supplied by regulator-dummy
vdd1p2: supplied by regulator-dummy

With this patch, the power supply is more accurate:

vdd1p0d: supplied by SW2
vdd1p2: supplied by SW2

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
No code change, just resend patch with correct encoding.
---
 arch/arm/boot/dts/imx7d-sdb.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 202922e..efc83bc 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -379,6 +379,14 @@
 	status = "okay";
 };
 
+&reg_1p0d {
+	vin-supply = <&sw2_reg>;
+};
+
+&reg_1p2 {
+	vin-supply = <&sw2_reg>;
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 8+ messages in thread

* Re: [PATCH RESEND 2/5] ARM: dts: imx7d-sdb: Assign corresponding power supply for LDOs
  2019-05-12  9:57 ` [PATCH RESEND 2/5] ARM: dts: imx7d-sdb: " Anson Huang
@ 2019-05-28 19:24   ` Leonard Crestez
  2019-05-29  5:17     ` Anson Huang
  0 siblings, 1 reply; 8+ messages in thread
From: Leonard Crestez @ 2019-05-28 19:24 UTC (permalink / raw)
  To: Anson Huang
  Cc: robh+dt, mark.rutland, shawnguo, s.hauer, kernel, festevam,
	devicetree, linux-arm-kernel, linux-kernel, dl-linux-imx

On 12.05.2019 12:57, Anson Huang wrote:
> On i.MX7D SDB board, sw2 supplies 1p0d/1p2 LDO, this patch assigns
> corresponding power supply for 1p0d/1p2 LDO to avoid confusion by
> below log:
> 
> vdd1p0d: supplied by regulator-dummy
> vdd1p2: supplied by regulator-dummy
> 
> With this patch, the power supply is more accurate:
> 
> vdd1p0d: supplied by SW2
> vdd1p2: supplied by SW2
> 
> diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
>
> +&reg_1p0d {
> +	vin-supply = <&sw2_reg>;
> +};
> +
> +&reg_1p2 {
> +	vin-supply = <&sw2_reg>;
> +};

It's not clear why but this patch breaks imx7d-sdb boot. Checked two 
boards: in a board farm and on my desk.

--
Regards,
Leonard

^ permalink raw reply	[flat|nested] 8+ messages in thread

* RE: [PATCH RESEND 2/5] ARM: dts: imx7d-sdb: Assign corresponding power supply for LDOs
  2019-05-28 19:24   ` Leonard Crestez
@ 2019-05-29  5:17     ` Anson Huang
  0 siblings, 0 replies; 8+ messages in thread
From: Anson Huang @ 2019-05-29  5:17 UTC (permalink / raw)
  To: Leonard Crestez
  Cc: robh+dt, mark.rutland, shawnguo, s.hauer, kernel, festevam,
	devicetree, linux-arm-kernel, linux-kernel, dl-linux-imx

Hi, Leonard

> -----Original Message-----
> From: Leonard Crestez
> Sent: Wednesday, May 29, 2019 3:24 AM
> To: Anson Huang <anson.huang@nxp.com>
> Cc: robh+dt@kernel.org; mark.rutland@arm.com; shawnguo@kernel.org;
> s.hauer@pengutronix.de; kernel@pengutronix.de; festevam@gmail.com;
> devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-
> kernel@vger.kernel.org; dl-linux-imx <linux-imx@nxp.com>
> Subject: Re: [PATCH RESEND 2/5] ARM: dts: imx7d-sdb: Assign corresponding
> power supply for LDOs
> 
> On 12.05.2019 12:57, Anson Huang wrote:
> > On i.MX7D SDB board, sw2 supplies 1p0d/1p2 LDO, this patch assigns
> > corresponding power supply for 1p0d/1p2 LDO to avoid confusion by
> > below log:
> >
> > vdd1p0d: supplied by regulator-dummy
> > vdd1p2: supplied by regulator-dummy
> >
> > With this patch, the power supply is more accurate:
> >
> > vdd1p0d: supplied by SW2
> > vdd1p2: supplied by SW2
> >
> > diff --git a/arch/arm/boot/dts/imx7d-sdb.dts
> > b/arch/arm/boot/dts/imx7d-sdb.dts
> >
> > +&reg_1p0d {
> > +	vin-supply = <&sw2_reg>;
> > +};
> > +
> > +&reg_1p2 {
> > +	vin-supply = <&sw2_reg>;
> > +};
> 
> It's not clear why but this patch breaks imx7d-sdb boot. Checked two
> boards: in a board farm and on my desk.

Thanks for reporting this issue, I can reproduce it now, a quick debug shows
that with this patch, when setting reg_1p0d's voltage to 1.0V, the SW2's voltage
will be changed to 1.5V, the expected voltage should be 1.8V, so 1.5V cause board
reset. Below patch can fix this issue, but I am still checking if this is the best fix, once
I figure out, I will send out a fix patch for review:

+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -267,6 +267,7 @@
                                regulator-max-microvolt = <1850000>;
                                regulator-boot-on;
                                regulator-always-on;
+                               regulator-max-step-microvolt = <25000>;
                        };

Thanks,
Anson

> 
> --
> Regards,
> Leonard

^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH RESEND 3/5] ARM: dts: imx6sl-evk: Assign corresponding power supply for LDOs
  2019-05-12  9:57 [PATCH RESEND 1/5] ARM: dts: imx6qdl-sabresd: Assign corresponding power supply for LDOs Anson Huang
  2019-05-12  9:57 ` [PATCH RESEND 2/5] ARM: dts: imx7d-sdb: " Anson Huang
@ 2019-05-12  9:57 ` Anson Huang
  2019-05-12  9:57 ` [PATCH RESEND 4/5] ARM: dts: imx6sll-evk: Assign corresponding power supply for vdd3p0 Anson Huang
                   ` (2 subsequent siblings)
  4 siblings, 0 replies; 8+ messages in thread
From: Anson Huang @ 2019-05-12  9:57 UTC (permalink / raw)
  To: robh+dt, mark.rutland, shawnguo, s.hauer, kernel, festevam,
	devicetree, linux-arm-kernel, linux-kernel
  Cc: dl-linux-imx

On i.MX6SL EVK board, sw2 supplies vdd1p1/vdd2p5/vdd3p0 LDO, this
patch assigns corresponding power supply for vdd1p1/vdd2p5/vdd3p0
to avoid confusion by below log:

vdd1p1: supplied by regulator-dummy
vdd3p0: supplied by regulator-dummy
vdd2p5: supplied by regulator-dummy

With this patch, the power supply is more accurate:

vdd1p1: supplied by SW2
vdd3p0: supplied by SW2
vdd2p5: supplied by SW2

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
No code change, just resend patch with correct encoding.
---
 arch/arm/boot/dts/imx6sl-evk.dts | 12 ++++++++++++
 arch/arm/boot/dts/imx6sl.dtsi    |  6 +++---
 2 files changed, 15 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index f7a48e4..4829aa6 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -580,6 +580,18 @@
 	status = "okay";
 };
 
+&reg_vdd1p1 {
+	vin-supply = <&sw2_reg>;
+};
+
+&reg_vdd3p0 {
+	vin-supply = <&sw2_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&sw2_reg>;
+};
+
 &snvs_poweroff {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 9393f03..b36fc01 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -531,7 +531,7 @@
 					     <0 54 IRQ_TYPE_LEVEL_HIGH>,
 					     <0 127 IRQ_TYPE_LEVEL_HIGH>;
 
-				regulator-1p1 {
+				reg_vdd1p1: regulator-1p1 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd1p1";
 					regulator-min-microvolt = <1000000>;
@@ -546,7 +546,7 @@
 					anatop-enable-bit = <0>;
 				};
 
-				regulator-3p0 {
+				reg_vdd3p0: regulator-3p0 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd3p0";
 					regulator-min-microvolt = <2800000>;
@@ -561,7 +561,7 @@
 					anatop-enable-bit = <0>;
 				};
 
-				regulator-2p5 {
+				reg_vdd2p5: regulator-2p5 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd2p5";
 					regulator-min-microvolt = <2250000>;
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 8+ messages in thread

* [PATCH RESEND 4/5] ARM: dts: imx6sll-evk: Assign corresponding power supply for vdd3p0
  2019-05-12  9:57 [PATCH RESEND 1/5] ARM: dts: imx6qdl-sabresd: Assign corresponding power supply for LDOs Anson Huang
  2019-05-12  9:57 ` [PATCH RESEND 2/5] ARM: dts: imx7d-sdb: " Anson Huang
  2019-05-12  9:57 ` [PATCH RESEND 3/5] ARM: dts: imx6sl-evk: " Anson Huang
@ 2019-05-12  9:57 ` Anson Huang
  2019-05-12  9:57 ` [PATCH RESEND 5/5] ARM: dts: imx6sx-sdb: Assign corresponding power supply for LDOs Anson Huang
  2019-05-20  3:04 ` [PATCH RESEND 1/5] ARM: dts: imx6qdl-sabresd: " Shawn Guo
  4 siblings, 0 replies; 8+ messages in thread
From: Anson Huang @ 2019-05-12  9:57 UTC (permalink / raw)
  To: robh+dt, mark.rutland, shawnguo, s.hauer, kernel, festevam,
	devicetree, linux-arm-kernel, linux-kernel
  Cc: dl-linux-imx

On i.MX6SLL EVK board, sw2 supplies vdd3p0 LDO, this patch assigns
corresponding power supply for vdd3p0 to avoid confusion by below log:

vdd3p0: supplied by regulator-dummy

With this patch, the power supply is more accurate:

vdd3p0: supplied by SW2

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
No code change, just resend patch with correct encoding.
---
 arch/arm/boot/dts/imx6sll-evk.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts
index 4a31a41..78809ea 100644
--- a/arch/arm/boot/dts/imx6sll-evk.dts
+++ b/arch/arm/boot/dts/imx6sll-evk.dts
@@ -265,6 +265,10 @@
 	status = "okay";
 };
 
+&reg_3p0 {
+	vin-supply = <&sw2_reg>;
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 8+ messages in thread

* [PATCH RESEND 5/5] ARM: dts: imx6sx-sdb: Assign corresponding power supply for LDOs
  2019-05-12  9:57 [PATCH RESEND 1/5] ARM: dts: imx6qdl-sabresd: Assign corresponding power supply for LDOs Anson Huang
                   ` (2 preceding siblings ...)
  2019-05-12  9:57 ` [PATCH RESEND 4/5] ARM: dts: imx6sll-evk: Assign corresponding power supply for vdd3p0 Anson Huang
@ 2019-05-12  9:57 ` Anson Huang
  2019-05-20  3:04 ` [PATCH RESEND 1/5] ARM: dts: imx6qdl-sabresd: " Shawn Guo
  4 siblings, 0 replies; 8+ messages in thread
From: Anson Huang @ 2019-05-12  9:57 UTC (permalink / raw)
  To: robh+dt, mark.rutland, shawnguo, s.hauer, kernel, festevam,
	devicetree, linux-arm-kernel, linux-kernel
  Cc: dl-linux-imx

On i.MX6SX SDB board, vgen6 supplies vdd1p1/vdd2p5 LDO and
sw2 supplies vdd3p0 LDO, this patch assigns corresponding power
supply for vdd1p1/vdd2p5/vdd3p0 to avoid confusion by below log:

vdd1p1: supplied by regulator-dummy
vdd3p0: supplied by regulator-dummy
vdd2p5: supplied by regulator-dummy

With this patch, the power supply is more accurate:

vdd1p1: supplied by VGEN6
vdd3p0: supplied by SW2
vdd2p5: supplied by VGEN6

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
No code change, just resend patch with correct encoding.
---
 arch/arm/boot/dts/imx6sx-sdb-reva.dts | 12 ++++++++++++
 arch/arm/boot/dts/imx6sx-sdb.dts      | 12 ++++++++++++
 arch/arm/boot/dts/imx6sx.dtsi         |  6 +++---
 3 files changed, 27 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
index 00c4854..5b3d6c10 100644
--- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
@@ -154,3 +154,15 @@
 	enable-active-high;
 	vin-supply = <&reg_can_en>;
 };
+
+&reg_vdd1p1 {
+	vin-supply = <&vgen6_reg>;
+};
+
+&reg_vdd3p0 {
+	vin-supply = <&sw2_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&vgen6_reg>;
+};
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
index 998e3e1..10f6da8 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb.dts
@@ -137,6 +137,18 @@
 	vin-supply = <&sw1a_reg>;
 };
 
+&reg_vdd1p1 {
+	vin-supply = <&vgen6_reg>;
+};
+
+&reg_vdd3p0 {
+	vin-supply = <&sw2_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&vgen6_reg>;
+};
+
 &reg_can_stby {
 	/* Transceiver EN/STBY is active low on RevB board */
 	gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index b16a123..bbdfdd8 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -600,7 +600,7 @@
 					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 
-				regulator-1p1 {
+				reg_vdd1p1: regulator-1p1 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd1p1";
 					regulator-min-microvolt = <1000000>;
@@ -615,7 +615,7 @@
 					anatop-enable-bit = <0>;
 				};
 
-				regulator-3p0 {
+				reg_vdd3p0: regulator-3p0 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd3p0";
 					regulator-min-microvolt = <2800000>;
@@ -630,7 +630,7 @@
 					anatop-enable-bit = <0>;
 				};
 
-				regulator-2p5 {
+				reg_vdd2p5: regulator-2p5 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd2p5";
 					regulator-min-microvolt = <2250000>;
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 8+ messages in thread

* Re: [PATCH RESEND 1/5] ARM: dts: imx6qdl-sabresd: Assign corresponding power supply for LDOs
  2019-05-12  9:57 [PATCH RESEND 1/5] ARM: dts: imx6qdl-sabresd: Assign corresponding power supply for LDOs Anson Huang
                   ` (3 preceding siblings ...)
  2019-05-12  9:57 ` [PATCH RESEND 5/5] ARM: dts: imx6sx-sdb: Assign corresponding power supply for LDOs Anson Huang
@ 2019-05-20  3:04 ` Shawn Guo
  4 siblings, 0 replies; 8+ messages in thread
From: Shawn Guo @ 2019-05-20  3:04 UTC (permalink / raw)
  To: Anson Huang
  Cc: robh+dt, mark.rutland, s.hauer, kernel, festevam, devicetree,
	linux-arm-kernel, linux-kernel, dl-linux-imx

On Sun, May 12, 2019 at 09:57:20AM +0000, Anson Huang wrote:
> On i.MX6Q/DL SabreSD board, vgen5 supplies vdd1p1/vdd2p5 LDO and
> sw2 supplies vdd3p0 LDO, this patch assigns corresponding power
> supply for vdd1p1/vdd2p5/vdd3p0 to avoid confusion by below log:
> 
> vdd1p1: supplied by regulator-dummy
> vdd3p0: supplied by regulator-dummy
> vdd2p5: supplied by regulator-dummy
> 
> With this patch, the power supply is more accurate:
> 
> vdd1p1: supplied by VGEN5
> vdd3p0: supplied by SW2
> vdd2p5: supplied by VGEN5
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

Applied all, thanks.

^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2019-05-29  5:17 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-12  9:57 [PATCH RESEND 1/5] ARM: dts: imx6qdl-sabresd: Assign corresponding power supply for LDOs Anson Huang
2019-05-12  9:57 ` [PATCH RESEND 2/5] ARM: dts: imx7d-sdb: " Anson Huang
2019-05-28 19:24   ` Leonard Crestez
2019-05-29  5:17     ` Anson Huang
2019-05-12  9:57 ` [PATCH RESEND 3/5] ARM: dts: imx6sl-evk: " Anson Huang
2019-05-12  9:57 ` [PATCH RESEND 4/5] ARM: dts: imx6sll-evk: Assign corresponding power supply for vdd3p0 Anson Huang
2019-05-12  9:57 ` [PATCH RESEND 5/5] ARM: dts: imx6sx-sdb: Assign corresponding power supply for LDOs Anson Huang
2019-05-20  3:04 ` [PATCH RESEND 1/5] ARM: dts: imx6qdl-sabresd: " Shawn Guo

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).