LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Dragan Cvetic <dragan.cvetic@xilinx.com>
To: <arnd@arndb.de>, <gregkh@linuxfoundation.org>,
<michal.simek@xilinx.com>, <linux-arm-kernel@lists.infradead.org>,
<robh+dt@kernel.org>, <mark.rutland@arm.com>,
<devicetree@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>,
Dragan Cvetic <dragan.cvetic@xilinx.com>,
Derek Kiernan <derek.kiernan@xilinx.com>
Subject: [PATCH V4 02/12] misc: xilinx-sdfec: add core driver
Date: Sat, 25 May 2019 12:37:15 +0100 [thread overview]
Message-ID: <1558784245-108751-3-git-send-email-dragan.cvetic@xilinx.com> (raw)
In-Reply-To: <1558784245-108751-1-git-send-email-dragan.cvetic@xilinx.com>
Implements an platform driver that matches with xlnx,
sd-fec-1.1 device tree node and registers as a character
device, including:
- SD-FEC driver binds to sdfec DT node.
- creates and initialise an initial driver dev structure.
- add the driver in Linux build and Kconfig.
Tested-by: Dragan Cvetic <dragan.cvetic@xilinx.com>
Signed-off-by: Derek Kiernan <derek.kiernan@xilinx.com>
Signed-off-by: Dragan Cvetic <dragan.cvetic@xilinx.com>
---
drivers/misc/Kconfig | 12 ++++
drivers/misc/Makefile | 1 +
drivers/misc/xilinx_sdfec.c | 136 +++++++++++++++++++++++++++++++++++++++
include/uapi/misc/xilinx_sdfec.h | 44 +++++++++++++
4 files changed, 193 insertions(+)
create mode 100644 drivers/misc/xilinx_sdfec.c
create mode 100644 include/uapi/misc/xilinx_sdfec.h
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 6a0365b..15d93a7 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -480,6 +480,18 @@ config PCI_ENDPOINT_TEST
Enable this configuration option to enable the host side test driver
for PCI Endpoint.
+config XILINX_SDFEC
+ tristate "Xilinx SDFEC 16"
+ help
+ This option enables support for the Xilinx SDFEC (Soft Decision
+ Forward Error Correction) driver. This enables a char driver
+ for the SDFEC.
+
+ You may select this driver if your design instantiates the
+ SDFEC(16nm) hardened block. To compile this as a module choose M.
+
+ If unsure, say N.
+
config MISC_RTSX
tristate
default MISC_RTSX_PCI || MISC_RTSX_USB
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index b9affcd..29fd1d7 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -49,6 +49,7 @@ obj-$(CONFIG_VMWARE_VMCI) += vmw_vmci/
obj-$(CONFIG_LATTICE_ECP3_CONFIG) += lattice-ecp3-config.o
obj-$(CONFIG_SRAM) += sram.o
obj-$(CONFIG_SRAM_EXEC) += sram-exec.o
+obj-$(CONFIG_XILINX_SDFEC) += xilinx_sdfec.o
obj-y += mic/
obj-$(CONFIG_GENWQE) += genwqe/
obj-$(CONFIG_ECHO) += echo/
diff --git a/drivers/misc/xilinx_sdfec.c b/drivers/misc/xilinx_sdfec.c
new file mode 100644
index 0000000..c437f78
--- /dev/null
+++ b/drivers/misc/xilinx_sdfec.c
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Xilinx SDFEC
+ *
+ * Copyright (C) 2019 Xilinx, Inc.
+ *
+ * Description:
+ * This driver is developed for SDFEC16 (Soft Decision FEC 16nm)
+ * IP. It exposes a char device interface in sysfs and supports file
+ * operations like open(), close() and ioctl().
+ */
+
+#include <linux/miscdevice.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/poll.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+
+#include <uapi/misc/xilinx_sdfec.h>
+
+static atomic_t xsdfec_ndevs = ATOMIC_INIT(0);
+
+/**
+ * struct xsdfec_dev - Driver data for SDFEC
+ * @regs: device physical base address
+ * @dev: pointer to device struct
+ * @config: Configuration of the SDFEC device
+ * @open_count: Count of char device being opened
+ * @miscdev: Misc device handle
+ * @irq_lock: Driver spinlock
+ *
+ * This structure contains necessary state for SDFEC driver to operate
+ */
+struct xsdfec_dev {
+ void __iomem *regs;
+ struct device *dev;
+ struct xsdfec_config config;
+ atomic_t open_count;
+ struct miscdevice miscdev;
+ /* Spinlock to protect state_updated and stats_updated */
+ spinlock_t irq_lock;
+};
+
+static const struct file_operations xsdfec_fops = {
+ .owner = THIS_MODULE,
+};
+
+#define NAMEBUF_SIZE ((size_t)32)
+static int xsdfec_probe(struct platform_device *pdev)
+{
+ struct xsdfec_dev *xsdfec;
+ struct device *dev;
+ struct resource *res;
+ int err;
+ char buf[NAMEBUF_SIZE];
+
+ xsdfec = devm_kzalloc(&pdev->dev, sizeof(*xsdfec), GFP_KERNEL);
+ if (!xsdfec)
+ return -ENOMEM;
+
+ xsdfec->dev = &pdev->dev;
+ xsdfec->config.fec_id = atomic_read(&xsdfec_ndevs);
+ spin_lock_init(&xsdfec->irq_lock);
+
+ dev = xsdfec->dev;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ xsdfec->regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(xsdfec->regs)) {
+ dev_err(dev, "Unable to map resource");
+ err = PTR_ERR(xsdfec->regs);
+ goto err_xsdfec_dev;
+ }
+
+ /* Save driver private data */
+ platform_set_drvdata(pdev, xsdfec);
+
+ snprintf(buf, NAMEBUF_SIZE, "xsdfec%d", xsdfec->config.fec_id);
+ xsdfec->miscdev.minor = MISC_DYNAMIC_MINOR;
+ xsdfec->miscdev.name = buf;
+ xsdfec->miscdev.fops = &xsdfec_fops;
+ xsdfec->miscdev.parent = dev;
+ err = misc_register(&xsdfec->miscdev);
+ if (err) {
+ dev_err(dev, "Unable to register device");
+ goto err_xsdfec_dev;
+ }
+
+ atomic_set(&xsdfec->open_count, 1);
+ dev_info(dev, "XSDFEC%d Probe Successful", xsdfec->config.fec_id);
+ atomic_inc(&xsdfec_ndevs);
+ return 0;
+
+ /* Failure cleanup */
+err_xsdfec_dev:
+ return err;
+}
+
+static int xsdfec_remove(struct platform_device *pdev)
+{
+ struct xsdfec_dev *xsdfec;
+
+ xsdfec = platform_get_drvdata(pdev);
+ if (!xsdfec)
+ return -ENODEV;
+
+ misc_deregister(&xsdfec->miscdev);
+ atomic_dec(&xsdfec_ndevs);
+ return 0;
+}
+
+static const struct of_device_id xsdfec_of_match[] = {
+ {
+ .compatible = "xlnx,sd-fec-1.1",
+ },
+ { /* end of table */ }
+};
+MODULE_DEVICE_TABLE(of, xsdfec_of_match);
+
+static struct platform_driver xsdfec_driver = {
+ .driver = {
+ .name = "xilinx-sdfec",
+ .of_match_table = xsdfec_of_match,
+ },
+ .probe = xsdfec_probe,
+ .remove = xsdfec_remove,
+};
+
+module_platform_driver(xsdfec_driver);
+
+MODULE_AUTHOR("Xilinx, Inc");
+MODULE_DESCRIPTION("Xilinx SD-FEC16 Driver");
+MODULE_LICENSE("GPL");
diff --git a/include/uapi/misc/xilinx_sdfec.h b/include/uapi/misc/xilinx_sdfec.h
new file mode 100644
index 0000000..1b8a63f
--- /dev/null
+++ b/include/uapi/misc/xilinx_sdfec.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * Xilinx SD-FEC
+ *
+ * Copyright (C) 2016 - 2017 Xilinx, Inc.
+ *
+ * Description:
+ * This driver is developed for SDFEC16 IP. It provides a char device
+ * in sysfs and supports file operations like open(), close() and ioctl().
+ */
+#ifndef __XILINX_SDFEC_H__
+#define __XILINX_SDFEC_H__
+
+#include <linux/types.h>
+
+/**
+ * enum xsdfec_state - State.
+ * @XSDFEC_INIT: Driver is initialized.
+ * @XSDFEC_STARTED: Driver is started.
+ * @XSDFEC_STOPPED: Driver is stopped.
+ * @XSDFEC_NEEDS_RESET: Driver needs to be reset.
+ * @XSDFEC_PL_RECONFIGURE: Programmable Logic needs to be recofigured.
+ *
+ * This enum is used to indicate the state of the driver.
+ */
+enum xsdfec_state {
+ XSDFEC_INIT = 0,
+ XSDFEC_STARTED,
+ XSDFEC_STOPPED,
+ XSDFEC_NEEDS_RESET,
+ XSDFEC_PL_RECONFIGURE,
+};
+
+/**
+ * struct xsdfec_config - Configuration of SD-FEC core.
+ * @fec_id: ID of SD-FEC instance. ID is limited to the number of active
+ * SD-FEC's in the FPGA and is related to the driver instance
+ * Minor number.
+ */
+struct xsdfec_config {
+ __s32 fec_id;
+};
+
+#endif /* __XILINX_SDFEC_H__ */
--
2.7.4
next prev parent reply other threads:[~2019-05-25 11:38 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-25 11:37 [PATCH V4 00/12] misc: xilinx sd-fec drive Dragan Cvetic
2019-05-25 11:37 ` [PATCH V4 01/12] dt-bindings: xilinx-sdfec: Add SDFEC binding Dragan Cvetic
2019-05-25 11:37 ` Dragan Cvetic [this message]
2019-06-06 13:25 ` [PATCH V4 02/12] misc: xilinx-sdfec: add core driver Greg KH
2019-06-06 18:16 ` Dragan Cvetic
2019-06-06 19:04 ` Greg KH
2019-05-25 11:37 ` [PATCH V4 03/12] misc: xilinx_sdfec: Add CCF support Dragan Cvetic
2019-05-25 11:37 ` [PATCH V4 04/12] misc: xilinx_sdfec: Add open, close and ioctl Dragan Cvetic
2019-06-06 13:26 ` Greg KH
2019-06-06 18:18 ` Dragan Cvetic
2019-06-06 13:28 ` Greg KH
2019-06-06 18:22 ` Dragan Cvetic
2019-06-07 10:58 ` Dragan Cvetic
2019-06-07 15:57 ` Greg KH
2019-06-08 19:40 ` Dragan Cvetic
2019-05-25 11:37 ` [PATCH V4 05/12] misc: xilinx_sdfec: Store driver config and state Dragan Cvetic
2019-05-25 11:37 ` [PATCH V4 06/12] misc: xilinx_sdfec: Add ability to configure turbo Dragan Cvetic
2019-05-25 11:37 ` [PATCH V4 07/12] misc: xilinx_sdfec: Add ability to configure LDPC Dragan Cvetic
2019-05-25 11:37 ` [PATCH V4 08/12] misc: xilinx_sdfec: Add ability to get/set config Dragan Cvetic
2019-05-25 11:37 ` [PATCH V4 09/12] misc: xilinx_sdfec: Support poll file operation Dragan Cvetic
2019-05-25 11:37 ` [PATCH V4 10/12] misc: xilinx_sdfec: Add stats & status ioctls Dragan Cvetic
2019-06-06 14:11 ` Greg KH
2019-06-06 18:27 ` Dragan Cvetic
2019-05-25 11:37 ` [PATCH V4 11/12] Docs: misc: xilinx_sdfec: Add documentation Dragan Cvetic
2019-05-25 11:37 ` [PATCH V4 12/12] MAINTAINERS: add maintainer for SD-FEC Dragan Cvetic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1558784245-108751-3-git-send-email-dragan.cvetic@xilinx.com \
--to=dragan.cvetic@xilinx.com \
--cc=arnd@arndb.de \
--cc=derek.kiernan@xilinx.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=michal.simek@xilinx.com \
--cc=robh+dt@kernel.org \
--subject='Re: [PATCH V4 02/12] misc: xilinx-sdfec: add core driver' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).