LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Eddie James <eajames@linux.ibm.com>
To: linux-aspeed@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	mark.rutland@arm.com, jason@lakedaemon.net, maz@kernel.org,
	robh+dt@kernel.org, tglx@linutronix.de, joel@jms.id.au,
	andrew@aj.id.au, eajames@linux.ibm.com
Subject: [PATCH v6 07/12] soc: aspeed: xdma: Add user interface
Date: Wed, 15 Jan 2020 15:29:45 -0600	[thread overview]
Message-ID: <1579123790-6894-8-git-send-email-eajames@linux.ibm.com> (raw)
In-Reply-To: <1579123790-6894-1-git-send-email-eajames@linux.ibm.com>

This commits adds a miscdevice to provide a user interface to the XDMA
engine. The interface provides the write operation to start DMA
operations. The DMA parameters are passed as the data to the write call.
The actual data to transfer is NOT passed through write. Note that both
directions of DMA operation are accomplished through the write command;
BMC to host and host to BMC.

The XDMA driver reserves an area of physical memory for DMA operations,
as the XDMA engine is restricted to accessing certain physical memory
areas on some platforms. This memory forms a pool from which users can
allocate pages for their usage with calls to mmap. The space allocated
by a client will be the space used in the DMA operation. For an
"upstream" (BMC to host) operation, the data in the client's area will
be transferred to the host. For a "downstream" (host to BMC) operation,
the host data will be placed in the client's memory area.

Poll is also provided in order to determine when the DMA operation is
complete for non-blocking IO.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
 drivers/soc/aspeed/aspeed-xdma.c | 200 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 200 insertions(+)

diff --git a/drivers/soc/aspeed/aspeed-xdma.c b/drivers/soc/aspeed/aspeed-xdma.c
index 3ca0795..1b81a08 100644
--- a/drivers/soc/aspeed/aspeed-xdma.c
+++ b/drivers/soc/aspeed/aspeed-xdma.c
@@ -13,6 +13,7 @@
 #include <linux/io.h>
 #include <linux/jiffies.h>
 #include <linux/mfd/syscon.h>
+#include <linux/miscdevice.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/of_device.h>
@@ -222,6 +223,8 @@ struct aspeed_xdma {
 	void __iomem *mem_virt;
 	dma_addr_t cmdq_phys;
 	struct gen_pool *pool;
+
+	struct miscdevice misc;
 };
 
 struct aspeed_xdma_client {
@@ -530,6 +533,186 @@ static irqreturn_t aspeed_xdma_pcie_irq(int irq, void *arg)
 	return IRQ_HANDLED;
 }
 
+static ssize_t aspeed_xdma_write(struct file *file, const char __user *buf,
+				 size_t len, loff_t *offset)
+{
+	int rc;
+	unsigned int num_cmds;
+	struct aspeed_xdma_op op;
+	struct aspeed_xdma_cmd cmds[2];
+	struct aspeed_xdma_client *client = file->private_data;
+	struct aspeed_xdma *ctx = client->ctx;
+
+	if (len != sizeof(op))
+		return -EINVAL;
+
+	rc = copy_from_user(&op, buf, len);
+	if (rc)
+		return rc;
+
+	if (!op.len || op.len > client->size ||
+	    op.direction > ASPEED_XDMA_DIRECTION_UPSTREAM)
+		return -EINVAL;
+
+	num_cmds = ctx->chip->set_cmd(ctx, cmds, &op, client->phys);
+	do {
+		rc = aspeed_xdma_start(ctx, num_cmds, cmds, !!op.direction,
+				       client);
+		if (!rc)
+			break;
+
+		if ((file->f_flags & O_NONBLOCK) || rc != -EBUSY)
+			return rc;
+
+		rc = wait_event_interruptible(ctx->wait,
+					      !(ctx->current_client ||
+						ctx->in_reset));
+	} while (!rc);
+
+	if (rc)
+		return -EINTR;
+
+	if (!(file->f_flags & O_NONBLOCK)) {
+		rc = wait_event_interruptible(ctx->wait, !client->in_progress);
+		if (rc)
+			return -EINTR;
+
+		if (client->error)
+			return -EIO;
+	}
+
+	return len;
+}
+
+static __poll_t aspeed_xdma_poll(struct file *file,
+				 struct poll_table_struct *wait)
+{
+	__poll_t mask = 0;
+	__poll_t req = poll_requested_events(wait);
+	struct aspeed_xdma_client *client = file->private_data;
+	struct aspeed_xdma *ctx = client->ctx;
+
+	if (req & (EPOLLIN | EPOLLRDNORM)) {
+		if (READ_ONCE(client->in_progress))
+			poll_wait(file, &ctx->wait, wait);
+
+		if (!READ_ONCE(client->in_progress)) {
+			if (READ_ONCE(client->error))
+				mask |= EPOLLERR;
+			else
+				mask |= EPOLLIN | EPOLLRDNORM;
+		}
+	}
+
+	if (req & (EPOLLOUT | EPOLLWRNORM)) {
+		if (READ_ONCE(ctx->current_client))
+			poll_wait(file, &ctx->wait, wait);
+
+		if (!READ_ONCE(ctx->current_client))
+			mask |= EPOLLOUT | EPOLLWRNORM;
+	}
+
+	return mask;
+}
+
+static void aspeed_xdma_vma_close(struct vm_area_struct *vma)
+{
+	int rc;
+	struct aspeed_xdma_client *client = vma->vm_private_data;
+
+	rc = wait_event_interruptible(client->ctx->wait, !client->in_progress);
+	if (rc)
+		return;
+
+	gen_pool_free(client->ctx->pool, (unsigned long)client->virt,
+		      client->size);
+
+	client->virt = NULL;
+	client->phys = 0;
+	client->size = 0;
+}
+
+static const struct vm_operations_struct aspeed_xdma_vm_ops = {
+	.close =	aspeed_xdma_vma_close,
+};
+
+static int aspeed_xdma_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	int rc;
+	struct aspeed_xdma_client *client = file->private_data;
+	struct aspeed_xdma *ctx = client->ctx;
+
+	/* restrict file to one mapping */
+	if (client->size)
+		return -EBUSY;
+
+	client->size = vma->vm_end - vma->vm_start;
+	client->virt = gen_pool_dma_alloc(ctx->pool, client->size,
+					  &client->phys);
+	if (!client->virt) {
+		client->phys = 0;
+		client->size = 0;
+		return -ENOMEM;
+	}
+
+	vma->vm_pgoff = (client->phys - ctx->mem_phys) >> PAGE_SHIFT;
+	vma->vm_ops = &aspeed_xdma_vm_ops;
+	vma->vm_private_data = client;
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+	rc = io_remap_pfn_range(vma, vma->vm_start, client->phys >> PAGE_SHIFT,
+				client->size, vma->vm_page_prot);
+	if (rc) {
+		dev_warn(ctx->dev, "mmap err: v[%08lx] to p[%08x], s[%08x]\n",
+			 vma->vm_start, (u32)client->phys, client->size);
+
+		gen_pool_free(ctx->pool, (unsigned long)client->virt,
+			      client->size);
+
+		client->virt = NULL;
+		client->phys = 0;
+		client->size = 0;
+		return rc;
+	}
+
+	dev_dbg(ctx->dev, "mmap: v[%08lx] to p[%08x], s[%08x]\n",
+		vma->vm_start, (u32)client->phys, client->size);
+
+	return 0;
+}
+
+static int aspeed_xdma_open(struct inode *inode, struct file *file)
+{
+	struct miscdevice *misc = file->private_data;
+	struct aspeed_xdma *ctx = container_of(misc, struct aspeed_xdma, misc);
+	struct aspeed_xdma_client *client = kzalloc(sizeof(*client),
+						    GFP_KERNEL);
+
+	if (!client)
+		return -ENOMEM;
+
+	client->ctx = ctx;
+	file->private_data = client;
+	return 0;
+}
+
+static int aspeed_xdma_release(struct inode *inode, struct file *file)
+{
+	struct aspeed_xdma_client *client = file->private_data;
+
+	kfree(client);
+	return 0;
+}
+
+static const struct file_operations aspeed_xdma_fops = {
+	.owner			= THIS_MODULE,
+	.write			= aspeed_xdma_write,
+	.poll			= aspeed_xdma_poll,
+	.mmap			= aspeed_xdma_mmap,
+	.open			= aspeed_xdma_open,
+	.release		= aspeed_xdma_release,
+};
+
 static int aspeed_xdma_init_scu(struct aspeed_xdma *ctx, struct device *dev)
 {
 	struct regmap *scu = syscon_regmap_lookup_by_phandle(dev->of_node,
@@ -691,6 +874,22 @@ static int aspeed_xdma_probe(struct platform_device *pdev)
 
 	aspeed_xdma_init_eng(ctx);
 
+	ctx->misc.minor = MISC_DYNAMIC_MINOR;
+	ctx->misc.fops = &aspeed_xdma_fops;
+	ctx->misc.name = "aspeed-xdma";
+	ctx->misc.parent = dev;
+	rc = misc_register(&ctx->misc);
+	if (rc) {
+		dev_err(dev, "Failed to register xdma miscdevice.\n");
+
+		gen_pool_free(ctx->pool, (unsigned long)ctx->cmdq,
+			      XDMA_CMDQ_SIZE);
+
+		reset_control_assert(ctx->reset);
+		clk_disable_unprepare(ctx->clock);
+		return rc;
+	}
+
 	/*
 	 * This interrupt could fire immediately so only request it once the
 	 * engine and driver are initialized.
@@ -712,6 +911,7 @@ static int aspeed_xdma_remove(struct platform_device *pdev)
 {
 	struct aspeed_xdma *ctx = platform_get_drvdata(pdev);
 
+	misc_deregister(&ctx->misc);
 	gen_pool_free(ctx->pool, (unsigned long)ctx->cmdq, XDMA_CMDQ_SIZE);
 
 	reset_control_assert(ctx->reset);
-- 
1.8.3.1


  parent reply	other threads:[~2020-01-15 21:30 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-15 21:29 [PATCH v6 00/12] aspeed: Add SCU interrupt controller and XDMA engine drivers Eddie James
2020-01-15 21:29 ` [PATCH v6 01/12] dt-bindings: interrupt-controller: Add Aspeed SCU interrupt controller Eddie James
2020-01-24 19:11   ` [tip: irq/core] " tip-bot2 for Eddie James
2020-01-15 21:29 ` [PATCH v6 02/12] irqchip: " Eddie James
2020-01-24 19:11   ` [tip: irq/core] " tip-bot2 for Eddie James
2020-01-15 21:29 ` [PATCH v6 03/12] ARM: dts: aspeed: ast2500: Add " Eddie James
2020-01-15 21:29 ` [PATCH v6 04/12] ARM: dts: aspeed: ast2600: Add SCU interrupt controllers Eddie James
2020-01-15 21:29 ` [PATCH v6 05/12] dt-bindings: soc: Add Aspeed XDMA Engine Eddie James
2020-01-17  0:01   ` Andrew Jeffery
2020-01-15 21:29 ` [PATCH v6 06/12] soc: aspeed: Add XDMA Engine Driver Eddie James
2020-01-17  0:07   ` Andrew Jeffery
2020-02-10 16:35   ` Arnd Bergmann
2020-02-10 17:10     ` Eddie James
2020-03-16  4:49       ` Joel Stanley
2020-02-16 23:56     ` Andrew Jeffery
2020-01-15 21:29 ` Eddie James [this message]
2020-01-17  0:09   ` [PATCH v6 07/12] soc: aspeed: xdma: Add user interface Andrew Jeffery
2020-01-15 21:29 ` [PATCH v6 08/12] soc: aspeed: xdma: Add reset ioctl Eddie James
2020-01-15 21:29 ` [PATCH v6 09/12] ARM: dts: aspeed: ast2500: Add XDMA Engine Eddie James
2020-01-15 21:29 ` [PATCH v6 10/12] ARM: dts: aspeed: ast2600: " Eddie James
2020-01-15 21:29 ` [PATCH v6 11/12] ARM: dts: aspeed: witherspoon: Enable " Eddie James
2020-01-17  0:12   ` Andrew Jeffery
2020-01-15 21:29 ` [PATCH v6 12/12] ARM: dts: aspeed: tacoma: Enable XDMA engine Eddie James
2020-01-17  0:13   ` Andrew Jeffery
2020-01-20  8:54 ` [PATCH v6 00/12] aspeed: Add SCU interrupt controller and XDMA engine drivers Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1579123790-6894-8-git-send-email-eajames@linux.ibm.com \
    --to=eajames@linux.ibm.com \
    --cc=andrew@aj.id.au \
    --cc=devicetree@vger.kernel.org \
    --cc=jason@lakedaemon.net \
    --cc=joel@jms.id.au \
    --cc=linux-aspeed@lists.ozlabs.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=maz@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=tglx@linutronix.de \
    --subject='Re: [PATCH v6 07/12] soc: aspeed: xdma: Add user interface' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).