LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
To: agross@kernel.org, bjorn.andersson@linaro.org,
	mturquette@baylibre.com, sboyd@kernel.org, robh+dt@kernel.org,
	mark.rutland@arm.com, vinod.koul@linaro.org,
	psodagud@codeaurora.org, tsoni@codeaurora.org,
	jshriram@codeaurora.org, tdas@codeaurora.org,
	vnkgutta@codeaurora.org, linux-arm-msm@vger.kernel.org,
	linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 7/7] arm64: dts: qcom: sm8250: Add sm8250 dts file
Date: Thu, 16 Jan 2020 15:39:54 -0800	[thread overview]
Message-ID: <1579217994-22219-8-git-send-email-vnkgutta@codeaurora.org> (raw)
In-Reply-To: <1579217994-22219-1-git-send-email-vnkgutta@codeaurora.org>

Add sm8250 devicetree file for SM8250 SoC and SM8250 MTP platform.
This file adds the basic nodes like cpu, psci and other required
configuration for booting up to the serial console.

Signed-off-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/Makefile       |   1 +
 arch/arm64/boot/dts/qcom/sm8250-mtp.dts |  29 ++
 arch/arm64/boot/dts/qcom/sm8250.dtsi    | 450 ++++++++++++++++++++++++++++++++
 3 files changed, 480 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm8250-mtp.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sm8250.dtsi

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 973c0f0..c6014c0 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -22,5 +22,6 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-db845c.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-lenovo-yoga-c630.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
new file mode 100644
index 0000000..224d0f1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "sm8250.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8250 MTP";
+	compatible = "qcom,sm8250-mtp";
+
+	aliases {
+		serial0 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
new file mode 100644
index 0000000..76c0fcd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -0,0 +1,450 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <38400000>;
+			clock-output-names = "xo_board";
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <1>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+				      compatible = "cache";
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_100>;
+			L2_100: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			next-level-cache = <&L2_200>;
+			L2_200: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			next-level-cache = <&L2_300>;
+			L2_300: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			next-level-cache = <&L2_400>;
+			L2_400: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			next-level-cache = <&L2_500>;
+			L2_500: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			next-level-cache = <&L2_600>;
+			L2_600: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			next-level-cache = <&L2_700>;
+			L2_700: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+	};
+
+	firmware: firmware {
+		scm: scm {
+			compatible = "qcom,scm";
+			#reset-cells = <1>;
+		};
+	};
+
+	tcsr_mutex: hwlock {
+		compatible = "qcom,tcsr-mutex";
+		syscon = <&tcsr_mutex_regs 0 0x1000>;
+		#hwlock-cells = <1>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@80000000 {
+			reg = <0x0 0x80000000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_aop_mem: memory@80700000 {
+			reg = <0x0 0x80700000 0x0 0x160000>;
+			no-map;
+		};
+
+		cmd_db: memory@80860000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x80860000 0x0 0x20000>;
+			no-map;
+		};
+
+		smem_mem: memory@80900000 {
+			reg = <0x0 0x80900000 0x0 0x200000>;
+			no-map;
+		};
+
+		removed_mem: memory@80b00000 {
+			reg = <0x0 0x80b00000 0x0 0x5300000>;
+			no-map;
+		};
+
+		camera_mem: memory@86200000 {
+			reg = <0x0 0x86200000 0x0 0x500000>;
+			no-map;
+		};
+
+		wlan_mem: memory@86700000 {
+			reg = <0x0 0x86700000 0x0 0x100000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@86800000 {
+			reg = <0x0 0x86800000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: memory@86810000 {
+			reg = <0x0 0x86810000 0x0 0xa000>;
+			no-map;
+		};
+
+		gpu_mem: memory@8681a000 {
+			reg = <0x0 0x8681a000 0x0 0x2000>;
+			no-map;
+		};
+
+		npu_mem: memory@86900000 {
+			reg = <0x0 0x86900000 0x0 0x500000>;
+			no-map;
+		};
+
+		video_mem: memory@86e00000 {
+			reg = <0x0 0x86e00000 0x0 0x500000>;
+			no-map;
+		};
+
+		cvp_mem: memory@87300000 {
+			reg = <0x0 0x87300000 0x0 0x500000>;
+			no-map;
+		};
+
+		cdsp_mem: memory@87800000 {
+			reg = <0x0 0x87800000 0x0 0x1400000>;
+			no-map;
+		};
+
+		slpi_mem: memory@88c00000 {
+			reg = <0x0 0x88c00000 0x0 0x1500000>;
+			no-map;
+		};
+
+		adsp_mem: memory@8a100000 {
+			reg = <0x0 0x8a100000 0x0 0x1d00000>;
+			no-map;
+		};
+
+		spss_mem: memory@8be00000 {
+			reg = <0x0 0x8be00000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap: memory@8bf00000 {
+			reg = <0x0 0x8bf00000 0x0 0x4600000>;
+			no-map;
+		};
+	};
+
+	smem: qcom,smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sm8250";
+			reg = <0x0 0x00100000 0x0 0x1f0000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clock-names = "bi_tcxo",
+					"sleep_clk";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				<&sleep_clk>;
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x00ac0000 0x0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc 133>,
+				<&gcc 134>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			uart2: serial@a90000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0x0 0x00a90000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc 113>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
+			      <0x0 0x17a60000 0x0 0x100000>;    /* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sm8250-pdc";
+			reg = <0x0b220000 0x30000>, <0x17c000f0 0x60>;
+			qcom,pdc-ranges = <0 480 94>, <94 609 31>,
+					<125 63 1>, <126 716 12>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		spmi_bus: qcom,spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0 0x0c440000 0x0 0x0001100>,
+			      <0x0 0x0c600000 0x0 0x2000000>,
+			      <0x0 0x0e600000 0x0 0x0100000>,
+			      <0x0 0x0e700000 0x0 0x00a0000>,
+			      <0x0 0x0c40a000 0x0 0x0026000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+			cell-index = <0>;
+		};
+
+		apps_rsc: rsc@18200000 {
+			label = "apps_rsc";
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x18200000 0x0 0x10000>,
+				<0x0 0x18210000 0x0 0x10000>,
+				<0x0 0x18220000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  2>,
+						<SLEEP_TCS   3>,
+						<WAKE_TCS    3>,
+						<CONTROL_TCS 1>;
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sm8250-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+		};
+
+		tcsr_mutex_regs: syscon@1f40000 {
+			compatible = "syscon";
+			reg = <0x0 0x01f40000 0x0 0x40000>;
+		};
+
+		timer@17c20000 {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x17c20000 0x0 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@17c21000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17c21000 0x0 0x1000>,
+				      <0x0 0x17c22000 0x0 0x1000>;
+			};
+
+			frame@17c23000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17c23000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c25000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17c25000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c27000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17c27000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c29000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17c29000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2b000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17c2b000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2d000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17c2d000 0x0 0x1000>;
+				status = "disabled";
+			};
+		};
+
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 12
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

  parent reply	other threads:[~2020-01-16 23:40 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-16 23:39 [PATCH 0/7] Add device tree and clock drivers for SM8250 SoC Venkata Narendra Kumar Gutta
2020-01-16 23:39 ` [PATCH 1/7] dt-bindings: clock: Add RPMHCC bindings for SM8250 Venkata Narendra Kumar Gutta
2020-01-21  9:54   ` Vinod Koul
2020-01-22 16:09   ` Rob Herring
2020-01-24 18:10   ` Bjorn Andersson
2020-01-16 23:39 ` [PATCH 2/7] clk: qcom: rpmh: Add support for RPMH clocks on SM8250 Venkata Narendra Kumar Gutta
2020-01-21  9:54   ` Vinod Koul
2020-01-23  6:46   ` Stephen Boyd
2020-01-24 18:01     ` Bjorn Andersson
2020-01-24 18:09   ` Bjorn Andersson
2020-01-16 23:39 ` [PATCH 3/7] clk: qcom: clk-alpha-pll: Refactor and cleanup trion PLL Venkata Narendra Kumar Gutta
2020-01-21 10:01   ` Vinod Koul
2020-01-24 18:32   ` Bjorn Andersson
2020-01-16 23:39 ` [PATCH 4/7] clk: qcom: clk-alpha-pll: Add support for controlling Lucid PLLs Venkata Narendra Kumar Gutta
2020-01-24 18:23   ` Bjorn Andersson
2020-01-16 23:39 ` [PATCH 5/7] dt-bindings: clock: Add SM8250 GCC clock bindings Venkata Narendra Kumar Gutta
2020-01-22 16:10   ` Rob Herring
2020-01-24 18:10   ` Bjorn Andersson
2020-01-16 23:39 ` [PATCH 6/7] clk: qcom: gcc: Add global clock controller driver for SM8250 Venkata Narendra Kumar Gutta
2020-01-24 18:35   ` Bjorn Andersson
2020-01-16 23:39 ` Venkata Narendra Kumar Gutta [this message]
2020-01-21 10:05   ` [PATCH 7/7] arm64: dts: qcom: sm8250: Add sm8250 dts file Vinod Koul
2020-01-24 18:16   ` Bjorn Andersson
2020-01-21 10:05 ` [PATCH 0/7] Add device tree and clock drivers for SM8250 SoC Vinod Koul
2020-01-24 18:07 ` Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1579217994-22219-8-git-send-email-vnkgutta@codeaurora.org \
    --to=vnkgutta@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jshriram@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=psodagud@codeaurora.org \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=tdas@codeaurora.org \
    --cc=tsoni@codeaurora.org \
    --cc=vinod.koul@linaro.org \
    --subject='Re: [PATCH 7/7] arm64: dts: qcom: sm8250: Add sm8250 dts file' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).