LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Yuti Amonkar <yamonkar@cadence.com>
To: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<kishon@ti.com>, <robh+dt@kernel.org>, <mark.rutland@arm.com>,
	<maxime@cerno.tech>
Cc: <jsarha@ti.com>, <tomi.valkeinen@ti.com>, <praneeth@ti.com>,
	<mparab@cadence.com>, <sjakhade@cadence.com>,
	<yamonkar@cadence.com>
Subject: [PATCH v4 00/13] PHY: Update Cadence Torrent PHY driver with reconfiguration
Date: Thu, 6 Feb 2020 07:10:48 +0100	[thread overview]
Message-ID: <1580969461-16981-1-git-send-email-yamonkar@cadence.com> (raw)

This patch series applies to the Cadence SD0801 PHY driver.
Cadence SD0801 PHY is also known as Torrent PHY. Torrent PHY
is a multiprotocol PHY supporting PHY configurations including
Display Port, USB and PCIe.

This patch series converts SD0801 PHY driver for DisplayPort into a
generic Torrent PHY driver, updates DisplayPort functionality with
reconfiguration support and finally adds platform dependent initialization
for TI J7 SoCs.

The patch series has following patches which applies the changes
in the below sequence
1. 001-dt-bindings-phy-Remove-Cadence-MHDP-PHY-dt-binding
This patch removes the MHDP PHY binding.
2. 002-dt-bindings-phy-Add-Cadence-MHDP-PHY-bindings-in-YAML-format.
This patch converts the MHDP PHY device tree bindings to yaml schemas
3. 003-phy-cadence-dp-Rename-to-phy-Cadence-Torrent
Rename Cadence DP PHY driver from phy-cadence-dp to phy-cadence-torrent
4. 004-phy-cadence-torrent-Adopt-Torrent-nomenclature
Update private data structures, module descriptions and functions prefix to Torrent
5. 005-phy-cadence-torrent-Add-wrapper-for-PHY-register-access
Add a wrapper function to write Torrent PHY registers to improve code readability.
6. 006-phy-cadence-torrent-Add-wrapper-for-DPTX-register-access
Add wrapper functions to read, write DisplayPort specific PHY registers to improve code
readability.
7. 007-phy-cadence-torrent-Refactor-code-for-reusability
Add separate function to set different power state values.
Use of uniform polling timeout value. Check return values of functions for error handling.
8. 008-phy-cadence-torrent-Add-19.2-MHz-reference-clock-support
Add configuration functions for 19.2 MHz reference clock support. Add register configurations
for SSC support.
9. 009-phy-cadence-torrent-Implement-phy-configure-APIs
Add PHY configuration APIs for link rate, number of lanes, voltage swing and pre-emphasis values.
10. 010-phy-cadence-torrent-Use-regmap-to-read-and-write-Torrent-PHY-registers 
Use regmap for accessing Torrent PHY registers. Update register offsets. Abstract address
calculation using regmap APIs.
11. 011-phy: cadence-torrent-Use-regmap-to-read-and-write-DPTX-PHY-registers
Use regmap to read and write DPTX specific PHY registers.
12. 012-phy-cadence-torrent-Add-platform-dependent-initialization-structure
Add platform dependent initialization data for Torrent PHY used in TI's J721E SoC.
13. 013-phy: cadence-torrent-Add-support-for-subnode-bindings
Implement single link subnode support to the phy driver.

Version History:

v4:
- Add separate patch to remove old binding.
- Add new patch to add new binding in YAML format.
- Squashed "dt-bindings: phy: phy-cadence-torrent: Add platform dependent
  compatible string" with "dt-bindings: phy: Add Cadence MHDP PHY bindings
  in YAML format".
- Added SPDX dual license tag to YAML bindings.
- Updated resets property description and removed reset-names
  property.
- Added enum to cdns,phy-type property adding all the currently
  known phy-type values.
- Updated the child node resets property to support one reset
  per lane.
- Added default values for cdns,num-lanes and cdns,max-bit-rate properties.


v3:
- Removed "Add clock binding" patch from the series and merged it with
  "Convert-Cadence-MHDP-PHY-bindings-to-YAML" patch.
- Added reset and reset-names properties to YAML file.
- Updated dptx_phy reg entry as optional in YAML.
- Renamed reg-names from sd0801_phy to torrent_phy.
- Added subnode property for each group of PHY lanes based on PHY
  type to the YAML. Renamed num_lanes and max_bit_rate to cdns,num-lanes
  and cdns,max-bit-rate and moved it to subnode properties.
- Added cdns,phy-type property in subnode. Currently cdns,phy-type supports only
  PHY_TYPE_DP.
- Added subnode instance structure to the driver in reference to the dts change.
- Updated functions to read properties from child node instead of parent node.
- Added num_lanes as argument to the cdns_torrent_dp_run function.

v2:
- Remove patch [1] from this series and send for a separate review.
- Use enum in compatible property of YAML file.
- Remove quotes in clock-names property "refclk" -> refclk in YAML file.
- Add reg-names property to YAML file
- Add additionalProperties:false to YAML file.
- No change in the driver code.

This patch series is dependent on PHY DisplayPort configuration patch [1].

[1]

https://lkml.org/lkml/2020/1/6/279

Swapnil Jakhade (10):
  phy: cadence-torrent: Adopt Torrent nomenclature
  phy: cadence-torrent: Add wrapper for PHY register access
  phy: cadence-torrent: Add wrapper for DPTX register access
  phy: cadence-torrent: Refactor code for reusability
  phy: cadence-torrent: Add 19.2 MHz reference clock support
  phy: cadence-torrent: Implement PHY configure APIs
  phy: cadence-torrent: Use regmap to read and write Torrent PHY
    registers
  phy: cadence-torrent: Use regmap to read and write DPTX PHY registers
  phy: cadence-torrent: Add platform dependent initialization structure
  phy: cadence-torrent: Add support for subnode bindings

Yuti Amonkar (3):
  dt-bindings: phy: Remove Cadence MHDP PHY dt binding
  dt-bindings: phy: Add Cadence MHDP PHY bindings in YAML format.
  phy: cadence-dp: Rename to phy-cadence-torrent

 .../bindings/phy/phy-cadence-dp.txt           |   30 -
 .../bindings/phy/phy-cadence-torrent.yaml     |  143 ++
 drivers/phy/cadence/Kconfig                   |    6 +-
 drivers/phy/cadence/Makefile                  |    2 +-
 drivers/phy/cadence/phy-cadence-dp.c          |  541 -----
 drivers/phy/cadence/phy-cadence-torrent.c     | 1944 +++++++++++++++++
 6 files changed, 2091 insertions(+), 575 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/phy/phy-cadence-dp.txt
 create mode 100644 Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
 delete mode 100644 drivers/phy/cadence/phy-cadence-dp.c
 create mode 100644 drivers/phy/cadence/phy-cadence-torrent.c

-- 
2.20.1


             reply	other threads:[~2020-02-06  6:11 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-06  6:10 Yuti Amonkar [this message]
2020-02-06  6:10 ` [PATCH v4 01/13] dt-bindings: phy: Remove Cadence MHDP PHY dt binding Yuti Amonkar
2020-02-06 21:51   ` Rob Herring
2020-02-06  6:10 ` [PATCH v4 02/13] dt-bindings: phy: Add Cadence MHDP PHY bindings in YAML format Yuti Amonkar
2020-02-06 20:55   ` Rob Herring
2020-02-07 12:05     ` Yuti Suresh Amonkar
2020-02-10 12:10     ` Jyri Sarha
2020-03-11 19:53   ` Rob Herring
2020-02-06  6:10 ` [PATCH v4 03/13] phy: cadence-dp: Rename to phy-cadence-torrent Yuti Amonkar
2020-02-06  6:10 ` [PATCH v4 04/13] phy: cadence-torrent: Adopt Torrent nomenclature Yuti Amonkar
2020-02-06  6:10 ` [PATCH v4 05/13] phy: cadence-torrent: Add wrapper for PHY register access Yuti Amonkar
2020-02-06  6:10 ` [PATCH v4 06/13] phy: cadence-torrent: Add wrapper for DPTX " Yuti Amonkar
2020-02-06  6:10 ` [PATCH v4 07/13] phy: cadence-torrent: Refactor code for reusability Yuti Amonkar
2020-02-06  6:10 ` [PATCH v4 08/13] phy: cadence-torrent: Add 19.2 MHz reference clock support Yuti Amonkar
2020-02-06  6:10 ` [PATCH v4 09/13] phy: cadence-torrent: Implement PHY configure APIs Yuti Amonkar
2020-02-06  6:10 ` [PATCH v4 10/13] phy: cadence-torrent: Use regmap to read and write Torrent PHY registers Yuti Amonkar
2020-02-06  6:10 ` [PATCH v4 11/13] phy: cadence-torrent: Use regmap to read and write DPTX " Yuti Amonkar
2020-02-06  6:11 ` [PATCH v4 12/13] phy: cadence-torrent: Add platform dependent initialization structure Yuti Amonkar
2020-02-06  6:11 ` [PATCH v4 13/13] phy: cadence-torrent: Add support for subnode bindings Yuti Amonkar
2020-03-04 12:05 ` [PATCH v4 00/13] PHY: Update Cadence Torrent PHY driver with reconfiguration Kishon Vijay Abraham I

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1580969461-16981-1-git-send-email-yamonkar@cadence.com \
    --to=yamonkar@cadence.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jsarha@ti.com \
    --cc=kishon@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=maxime@cerno.tech \
    --cc=mparab@cadence.com \
    --cc=praneeth@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=sjakhade@cadence.com \
    --cc=tomi.valkeinen@ti.com \
    --subject='Re: [PATCH v4 00/13] PHY: Update Cadence Torrent PHY driver with reconfiguration' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).