LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Ben Levinsky <ben.levinsky@xilinx.com>
To: ohad@wizery.com, bjorn.andersson@linaro.org,
michal.simek@xilinx.com, jollys@xilinx.com,
rajan.vaja@xilinx.com, robh+dt@kernel.org, mark.rutland@arm.com
Cc: linux-remoteproc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 3/5] firmware: xilinx: Add zynqmp_get_node_status API
Date: Mon, 24 Feb 2020 09:52:29 -0800 [thread overview]
Message-ID: <1582566751-13118-4-git-send-email-ben.levinsky@xilinx.com> (raw)
In-Reply-To: <1582566751-13118-1-git-send-email-ben.levinsky@xilinx.com>
This patch adds a new API to provide access to the
current power state of a sub-system on Zynqmp sub-system.
Signed-off-by: Ben Levinsky <ben.levinsky@xilinx.com>
---
drivers/firmware/xilinx/zynqmp.c | 42 ++++++++++++++++++++++++++++++++++++
include/linux/firmware/xlnx-zynqmp.h | 3 +++
2 files changed, 45 insertions(+)
diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index 486dcb1..98e35d4 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -725,6 +725,47 @@ static int zynqmp_pm_request_wakeup(const u32 node,
}
/**
+ * zynqmp_pm_get_node_status - PM call to request a node's current power state
+ * @node: ID of the component or sub-system in question
+ * @status: Current operating state of the requested node
+ * @requirements: Current requirements asserted on the node,
+ * used for slave nodes only.
+ * @usage: Usage information, used for slave nodes only:
+ * PM_USAGE_NO_MASTER - No master is currently using
+ * the node
+ * PM_USAGE_CURRENT_MASTER - Only requesting master is
+ * currently using the node
+ * PM_USAGE_OTHER_MASTER - Only other masters are
+ * currently using the node
+ * PM_USAGE_BOTH_MASTERS - Both the current and at least
+ * one other master is currently
+ * using the node
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_get_node_status(const u32 node, u32 *const status,
+ u32 *const requirements, u32 *const usage)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ if (!status)
+ return -EINVAL;
+
+ ret = zynqmp_pm_invoke_fn(PM_GET_NODE_STATUS, node, 0, 0,
+ 0, ret_payload);
+ if (ret_payload[0] == XST_PM_SUCCESS) {
+ *status = ret_payload[1];
+ if (requirements)
+ *requirements = ret_payload[2];
+ if (usage)
+ *usage = ret_payload[3];
+ }
+
+ return ret;
+}
+
+/**
* zynqmp_pm_set_requirement() - PM call to set requirement for PM slaves
* @node: Node ID of the slave
* @capabilities: Requested capabilities of the slave
@@ -769,6 +810,7 @@ static const struct zynqmp_eemi_ops eemi_ops = {
.set_requirement = zynqmp_pm_set_requirement,
.fpga_load = zynqmp_pm_fpga_load,
.fpga_get_status = zynqmp_pm_fpga_get_status,
+ .get_node_status = zynqmp_pm_get_node_status,
};
/**
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 0a68849..fb4efc9 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -62,6 +62,7 @@
enum pm_api_id {
PM_GET_API_VERSION = 1,
+ PM_GET_NODE_STATUS = 3,
PM_REQUEST_NODE = 13,
PM_RELEASE_NODE,
PM_SET_REQUIREMENT,
@@ -309,6 +310,8 @@ struct zynqmp_pm_query_data {
struct zynqmp_eemi_ops {
int (*get_api_version)(u32 *version);
int (*get_chipid)(u32 *idcode, u32 *version);
+ int (*get_node_status)(const u32 node, u32 *const status,
+ u32 *const requirements, u32 *const usage);
int (*fpga_load)(const u64 address, const u32 size, const u32 flags);
int (*fpga_get_status)(u32 *value);
int (*query_data)(struct zynqmp_pm_query_data qdata, u32 *out);
--
2.7.4
next prev parent reply other threads:[~2020-02-24 17:52 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-24 17:52 [PATCH 0/5] remoteproc: Add zynqmp_r5 driver Ben Levinsky
2020-02-24 17:52 ` [PATCH 1/5] firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration Ben Levinsky
2020-03-12 7:32 ` Michal Simek
2020-02-24 17:52 ` [PATCH 2/5] firmware: xilinx: Add shutdown/wakeup APIs Ben Levinsky
2020-03-12 7:34 ` Michal Simek
2020-02-24 17:52 ` Ben Levinsky [this message]
2020-03-11 16:26 ` [PATCH 3/5] firmware: xilinx: Add zynqmp_get_node_status API Mathieu Poirier
2020-02-24 17:52 ` [PATCH 4/5] dt-bindings: remoteproc: Add documentation for ZynqMP R5 rproc bindings Ben Levinsky
2020-03-02 20:27 ` Rob Herring
2020-03-11 16:55 ` Mathieu Poirier
2020-02-24 17:52 ` [PATCH 5/5] remoteproc: Add initial zynqmp R5 remoteproc driver Ben Levinsky
2020-03-05 23:12 ` Michael Auchter
2020-03-11 17:38 ` Mathieu Poirier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1582566751-13118-4-git-send-email-ben.levinsky@xilinx.com \
--to=ben.levinsky@xilinx.com \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=jollys@xilinx.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=michal.simek@xilinx.com \
--cc=ohad@wizery.com \
--cc=rajan.vaja@xilinx.com \
--cc=robh+dt@kernel.org \
--subject='Re: [PATCH 3/5] firmware: xilinx: Add zynqmp_get_node_status API' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).