LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Maulik Shah <mkshah@codeaurora.org>
To: swboyd@chromium.org, mka@chromium.org, evgreen@chromium.org,
bjorn.andersson@linaro.org
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
agross@kernel.org, dianders@chromium.org, rnayak@codeaurora.org,
ilina@codeaurora.org, lsrao@codeaurora.org,
Maulik Shah <mkshah@codeaurora.org>,
devicetree@vger.kernel.orgi
Subject: [PATCH v10 1/3] arm64: dts: qcom: sc7180: Add cpuidle low power states
Date: Tue, 3 Mar 2020 17:56:53 +0530 [thread overview]
Message-ID: <1583238415-18686-2-git-send-email-mkshah@codeaurora.org> (raw)
In-Reply-To: <1583238415-18686-1-git-send-email-mkshah@codeaurora.org>
Add device bindings for cpuidle states for cpu devices.
Cc: devicetree@vger.kernel.orgi
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Srinivas Rao L <lsrao@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
arch/arm64/boot/dts/qcom/sc7180.dtsi | 78 ++++++++++++++++++++++++++++++++++++
1 file changed, 78 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 253274d..f5c08ce 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -94,6 +94,9 @@
compatible = "arm,armv8";
reg = <0x0 0x0>;
enable-method = "psci";
+ cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+ &LITTLE_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_0>;
@@ -113,6 +116,9 @@
compatible = "arm,armv8";
reg = <0x0 0x100>;
enable-method = "psci";
+ cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+ &LITTLE_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_100>;
@@ -129,6 +135,9 @@
compatible = "arm,armv8";
reg = <0x0 0x200>;
enable-method = "psci";
+ cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+ &LITTLE_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_200>;
@@ -145,6 +154,9 @@
compatible = "arm,armv8";
reg = <0x0 0x300>;
enable-method = "psci";
+ cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+ &LITTLE_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_300>;
@@ -161,6 +173,9 @@
compatible = "arm,armv8";
reg = <0x0 0x400>;
enable-method = "psci";
+ cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+ &LITTLE_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_400>;
@@ -177,6 +192,9 @@
compatible = "arm,armv8";
reg = <0x0 0x500>;
enable-method = "psci";
+ cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+ &LITTLE_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_500>;
@@ -193,6 +211,9 @@
compatible = "arm,armv8";
reg = <0x0 0x600>;
enable-method = "psci";
+ cpu-idle-states = <&BIG_CPU_SLEEP_0
+ &BIG_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <1740>;
dynamic-power-coefficient = <405>;
next-level-cache = <&L2_600>;
@@ -209,6 +230,9 @@
compatible = "arm,armv8";
reg = <0x0 0x700>;
enable-method = "psci";
+ cpu-idle-states = <&BIG_CPU_SLEEP_0
+ &BIG_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <1740>;
dynamic-power-coefficient = <405>;
next-level-cache = <&L2_700>;
@@ -255,6 +279,60 @@
};
};
};
+
+ idle-states {
+ entry-method = "psci";
+
+ LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "little-power-down";
+ arm,psci-suspend-param = <0x40000003>;
+ entry-latency-us = <549>;
+ exit-latency-us = <901>;
+ min-residency-us = <1774>;
+ local-timer-stop;
+ };
+
+ LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
+ compatible = "arm,idle-state";
+ idle-state-name = "little-rail-power-down";
+ arm,psci-suspend-param = <0x40000004>;
+ entry-latency-us = <702>;
+ exit-latency-us = <915>;
+ min-residency-us = <4001>;
+ local-timer-stop;
+ };
+
+ BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "big-power-down";
+ arm,psci-suspend-param = <0x40000003>;
+ entry-latency-us = <523>;
+ exit-latency-us = <1244>;
+ min-residency-us = <2207>;
+ local-timer-stop;
+ };
+
+ BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
+ compatible = "arm,idle-state";
+ idle-state-name = "big-rail-power-down";
+ arm,psci-suspend-param = <0x40000004>;
+ entry-latency-us = <526>;
+ exit-latency-us = <1854>;
+ min-residency-us = <5555>;
+ local-timer-stop;
+ };
+
+ CLUSTER_SLEEP_0: cluster-sleep-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "cluster-power-down";
+ arm,psci-suspend-param = <0x40003444>;
+ entry-latency-us = <3263>;
+ exit-latency-us = <6562>;
+ min-residency-us = <9926>;
+ local-timer-stop;
+ };
+ };
};
memory@80000000 {
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2020-03-03 12:27 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-03 12:26 [PATCH v10 0/3] Invoke rpmh_flush for non OSI targets Maulik Shah
2020-03-03 12:26 ` Maulik Shah [this message]
2020-03-03 12:26 ` [PATCH v10 2/3] soc: qcom: rpmh: Update dirty flag only when data changes Maulik Shah
2020-03-04 23:21 ` Doug Anderson
2020-03-05 11:10 ` Maulik Shah
2020-03-05 22:22 ` Doug Anderson
2020-03-10 11:03 ` Maulik Shah
2020-03-10 15:46 ` Doug Anderson
2020-03-11 5:40 ` Maulik Shah
2020-03-03 12:26 ` [PATCH v10 3/3] soc: qcom: rpmh: Invoke rpmh_flush() for dirty caches Maulik Shah
2020-03-04 23:22 ` Doug Anderson
2020-03-05 11:30 ` Maulik Shah
2020-03-05 22:20 ` Doug Anderson
2020-03-10 11:00 ` Maulik Shah
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1583238415-18686-2-git-send-email-mkshah@codeaurora.org \
--to=mkshah@codeaurora.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.orgi \
--cc=dianders@chromium.org \
--cc=evgreen@chromium.org \
--cc=ilina@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lsrao@codeaurora.org \
--cc=mka@chromium.org \
--cc=rnayak@codeaurora.org \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).