LKML Archive on
help / color / mirror / Atom feed
From: Maulik Shah <>
	Maulik Shah <>
Subject: [PATCH v13 0/4] Invoke rpmh_flush for non OSI targets
Date: Mon,  9 Mar 2020 15:00:31 +0530	[thread overview]
Message-ID: <> (raw)

Changes in v13:
- Address Stephen's comment to maintain COMPILE_TEST
- Address Doug's comments and add new APIs for start and end transaction

Changes in v12:
- Kconfig change to remove COMPILE_TEST was dropped in v11, reinclude it.

Changes in v11:
- Address Doug's comments on change 2 and 3
- Include change to invalidate TCSes before flush from [4]

Changes in v10:
- Address Evan's comments to update commit message on change 2
- Add Evan's Reviewed by on change 2
- Remove comment from rpmh_flush() related to last CPU invoking it
- Rebase all changes on top of next-20200302

Changes in v9:
- Keep rpmh_flush() to invoke from within cache_lock
- Remove comments related to only last cpu invoking rpmh_flush()

Changes in v8:
- Address Stephen's comments on changes 2 and 3
- Add Reviewed by from Stephen on change 1

Changes in v7:
- Address Srinivas's comments to update commit text
- Add Reviewed by from Srinivas

Changes in v6:
- Drop 1 & 2 changes from v5 as they already landed in maintainer tree
- Drop 3 & 4 changes from v5 as no user at present for power domain in rsc
- Rename subject to appropriate since power domain changes are dropped
- Rebase other changes on top of next-20200221

Changes in v5:
- Add Rob's Acked by on dt-bindings change
- Drop firmware psci change
- Update cpuidle stats in dtsi to follow PC mode
- Include change to update dirty flag when data is updated from [4]
- Add change to invoke rpmh_flush when caches are dirty

Changes in v4:
- Add change to allow hierarchical topology in PC mode
- Drop hierarchical domain idle states converter from v3
- Address Merge sc7180 dtsi change to add low power modes

Changes in v3:
- Address Rob's comment on dt property value
- Address Stephen's comments on rpmh-rsc driver change
- Include sc7180 cpuidle low power mode changes from [1]
- Include hierarchical domain idle states converter change from [2]

Changes in v2:
- Add Stephen's Reviewed-By to the first three patches
- Addressed Stephen's comments on fourth patch
- Include changes to connect rpmh domain to cpuidle and genpds

Resource State Coordinator (RSC) is responsible for powering off/lowering
the requirements from CPU subsystem for the associated hardware like buses,
clocks, and regulators when all CPUs and cluster is powered down.

RSC power domain uses last-man activities provided by genpd framework based
on Ulf Hansoon's patch series[3], when the cluster of CPUs enter deepest
idle states. As a part of domain poweroff, RSC can lower resource state
requirements by flushing the cached sleep and wake state votes for various


Maulik Shah (3):
  arm64: dts: qcom: sc7180: Add cpuidle low power states
  soc: qcom: rpmh: Update dirty flag only when data changes
  soc: qcom: rpmh: Invoke rpmh_flush for dirty caches

 arch/arm64/boot/dts/qcom/sc7180.dtsi | 78 ++++++++++++++++++++++++++++++++++++
 drivers/soc/qcom/rpmh.c              | 27 ++++++++++---
 2 files changed, 100 insertions(+), 5 deletions(-)

QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

             reply	other threads:[~2020-03-09  9:31 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-09  9:30 Maulik Shah [this message]
2020-03-09  9:30 ` [PATCH v13 1/5] arm64: dts: qcom: sc7180: Add cpuidle low power states Maulik Shah
2020-03-09  9:30 ` [PATCH v13 2/5] soc: qcom: rpmh: Update dirty flag only when data changes Maulik Shah
2020-03-09 23:42   ` Doug Anderson
2020-03-13  8:53     ` Maulik Shah
2020-03-09  9:30 ` [PATCH v13 3/5] soc: qcom: rpmh: Invalidate SLEEP and WAKE TCSes before flushing new data Maulik Shah
2020-03-09 23:42   ` Doug Anderson
2020-03-10 11:09     ` Maulik Shah
2020-03-09  9:30 ` [PATCH v13 4/5] soc: qcom: rpmh: Invoke rpmh_flush() for dirty caches Maulik Shah
2020-03-09 23:43   ` Doug Anderson
2020-03-10 11:19     ` Maulik Shah
2020-03-10 15:46       ` Doug Anderson
2020-03-11  6:36         ` Maulik Shah
2020-03-11 23:06           ` Doug Anderson
     [not found]             ` <>
2020-03-12 15:11               ` Doug Anderson
2020-03-25 17:15                 ` Maulik Shah
2020-03-26 18:08                   ` Doug Anderson
2020-03-09  9:30 ` [PATCH v13 5/5] drivers: qcom: Update rpmh clients to use start and end transactions Maulik Shah
2020-03-09 23:44   ` Doug Anderson
2020-03-10 11:46     ` Maulik Shah
2020-03-10 15:46       ` Doug Anderson
2020-03-11 23:02   ` Doug Anderson
2020-03-09 23:42 ` [PATCH v13 0/4] Invoke rpmh_flush for non OSI targets Doug Anderson
2020-03-10 11:49   ` Maulik Shah

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \ \ \ \ \ \ \
    --subject='Re: [PATCH v13 0/4] Invoke rpmh_flush for non OSI targets' \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).