LKML Archive on lore.kernel.org help / color / mirror / Atom feed
From: Sibi Sankar <sibis@codeaurora.org> To: bjorn.andersson@linaro.org, robh+dt@kernel.org, will@kernel.org, saiprakash.ranjan@codeaurora.org Cc: ohad@wizery.com, agross@kernel.org, mathieu.poirier@linaro.org, robin.murphy@arm.com, joro@8bytes.org, p.zabel@pengutronix.de, linux-arm-msm@vger.kernel.org, linux-remoteproc@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, evgreen@chromium.org, dianders@chromium.org, swboyd@chromium.org, Sibi Sankar <sibis@codeaurora.org> Subject: [PATCH 5/9] remoteproc: mss: q6v5-mss: Add modem support on SC7280 Date: Fri, 25 Jun 2021 01:17:34 +0530 [thread overview] Message-ID: <1624564058-24095-6-git-send-email-sibis@codeaurora.org> (raw) In-Reply-To: <1624564058-24095-1-git-send-email-sibis@codeaurora.org> Add out of reset sequence support for modem sub-system on SC7280 SoCs. It requires access to an additional set of qaccept registers, external power/clk control registers and halt vq6 register to put the modem back into reset. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> --- drivers/remoteproc/qcom_q6v5_mss.c | 245 ++++++++++++++++++++++++++++++++++++- 1 file changed, 241 insertions(+), 4 deletions(-) diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c index 5d21084004cb..4e32811e0025 100644 --- a/drivers/remoteproc/qcom_q6v5_mss.c +++ b/drivers/remoteproc/qcom_q6v5_mss.c @@ -77,6 +77,14 @@ #define HALT_ACK_TIMEOUT_US 100000 +/* QACCEPT Register Offsets */ +#define QACCEPT_ACCEPT_REG 0x0 +#define QACCEPT_ACTIVE_REG 0x4 +#define QACCEPT_DENY_REG 0x8 +#define QACCEPT_REQ_REG 0xC + +#define QACCEPT_TIMEOUT_US 50 + /* QDSP6SS_RESET */ #define Q6SS_STOP_CORE BIT(0) #define Q6SS_CORE_ARES BIT(1) @@ -143,6 +151,9 @@ struct rproc_hexagon_res { bool has_alt_reset; bool has_mba_logs; bool has_spare_reg; + bool has_qaccept_regs; + bool has_ext_cntl_regs; + bool has_vq6; }; struct q6v5 { @@ -158,8 +169,18 @@ struct q6v5 { u32 halt_q6; u32 halt_modem; u32 halt_nc; + u32 halt_vq6; u32 conn_box; + u32 qaccept_mdm; + u32 qaccept_cx; + u32 qaccept_axi; + + u32 axim1_clk_off; + u32 crypto_clk_off; + u32 force_clk_on; + u32 rscc_disable; + struct reset_control *mss_restart; struct reset_control *pdc_reset; @@ -201,6 +222,9 @@ struct q6v5 { bool has_alt_reset; bool has_mba_logs; bool has_spare_reg; + bool has_qaccept_regs; + bool has_ext_cntl_regs; + bool has_vq6; int mpss_perm; int mba_perm; const char *hexagon_mdt_image; @@ -213,6 +237,7 @@ enum { MSS_MSM8996, MSS_MSM8998, MSS_SC7180, + MSS_SC7280, MSS_SDM845, }; @@ -473,6 +498,12 @@ static int q6v5_reset_assert(struct q6v5 *qproc) regmap_update_bits(qproc->conn_map, qproc->conn_box, AXI_GATING_VALID_OVERRIDE, 0); ret = reset_control_deassert(qproc->mss_restart); + } else if (qproc->has_ext_cntl_regs) { + regmap_write(qproc->conn_map, qproc->rscc_disable, 0); + reset_control_assert(qproc->pdc_reset); + reset_control_assert(qproc->mss_restart); + reset_control_deassert(qproc->pdc_reset); + ret = reset_control_deassert(qproc->mss_restart); } else { ret = reset_control_assert(qproc->mss_restart); } @@ -490,7 +521,7 @@ static int q6v5_reset_deassert(struct q6v5 *qproc) ret = reset_control_reset(qproc->mss_restart); writel(0, qproc->rmb_base + RMB_MBA_ALT_RESET); reset_control_deassert(qproc->pdc_reset); - } else if (qproc->has_spare_reg) { + } else if (qproc->has_spare_reg || qproc->has_ext_cntl_regs) { ret = reset_control_reset(qproc->mss_restart); } else { ret = reset_control_deassert(qproc->mss_restart); @@ -604,7 +635,7 @@ static int q6v5proc_reset(struct q6v5 *qproc) } goto pbl_wait; - } else if (qproc->version == MSS_SC7180) { + } else if (qproc->version == MSS_SC7180 || qproc->version == MSS_SC7280) { val = readl(qproc->reg_base + QDSP6SS_SLEEP); val |= Q6SS_CBCR_CLKEN; writel(val, qproc->reg_base + QDSP6SS_SLEEP); @@ -787,6 +818,82 @@ static int q6v5proc_reset(struct q6v5 *qproc) return ret; } +static int q6v5proc_enable_qchannel(struct q6v5 *qproc, struct regmap *map, u32 offset) +{ + unsigned int val; + int ret; + + if (!qproc->has_qaccept_regs) + return 0; + + if (qproc->has_ext_cntl_regs) { + regmap_write(qproc->conn_map, qproc->rscc_disable, 0); + regmap_write(qproc->conn_map, qproc->force_clk_on, 1); + + ret = regmap_read_poll_timeout(qproc->halt_map, qproc->axim1_clk_off, val, + !val, 1, Q6SS_CBCR_TIMEOUT_US); + if (ret) { + dev_err(qproc->dev, "failed to enable axim1 clock\n"); + return -ETIMEDOUT; + } + } + + regmap_write(map, offset + QACCEPT_REQ_REG, 1); + + /* Wait for accept */ + ret = regmap_read_poll_timeout(map, offset + QACCEPT_ACCEPT_REG, val, val, 5, + QACCEPT_TIMEOUT_US); + if (ret) { + dev_err(qproc->dev, "qchannel enable failed\n"); + return -ETIMEDOUT; + } + + return 0; +} + +static void q6v5proc_disable_qchannel(struct q6v5 *qproc, struct regmap *map, u32 offset) +{ + int ret; + unsigned int val, retry; + unsigned int nretry = 10; + bool takedown_complete = false; + + if (!qproc->has_qaccept_regs) + return; + + while (!takedown_complete && nretry) { + nretry--; + + regmap_read_poll_timeout(map, offset + QACCEPT_ACTIVE_REG, val, !val, 5, + QACCEPT_TIMEOUT_US); + + regmap_write(map, offset + QACCEPT_REQ_REG, 0); + + retry = 10; + while (retry) { + usleep_range(5, 10); + retry--; + ret = regmap_read(map, offset + QACCEPT_DENY_REG, &val); + if (!ret && val) { + regmap_write(map, offset + QACCEPT_REQ_REG, 1); + break; + } + + ret = regmap_read(map, offset + QACCEPT_ACCEPT_REG, &val); + if (!ret && !val) { + takedown_complete = true; + break; + } + } + + if (!retry) + break; + } + + if (!takedown_complete) + dev_err(qproc->dev, "qchannel takedown failed\n"); +} + static void q6v5proc_halt_axi_port(struct q6v5 *qproc, struct regmap *halt_map, u32 offset) @@ -950,6 +1057,12 @@ static int q6v5_mba_load(struct q6v5 *qproc) goto assert_reset; } + ret = q6v5proc_enable_qchannel(qproc, qproc->halt_map, qproc->qaccept_axi); + if (ret) { + dev_err(qproc->dev, "failed to enable axi bridge\n"); + goto disable_active_clks; + } + /* * Some versions of the MBA firmware will upon boot wipe the MPSS region as well, so provide * the Q6 access to this region. @@ -996,8 +1109,13 @@ static int q6v5_mba_load(struct q6v5 *qproc) halt_axi_ports: q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_q6); + if (qproc->has_vq6) + q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_vq6); q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_modem); q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_nc); + q6v5proc_disable_qchannel(qproc, qproc->halt_map, qproc->qaccept_mdm); + q6v5proc_disable_qchannel(qproc, qproc->halt_map, qproc->qaccept_cx); + q6v5proc_disable_qchannel(qproc, qproc->halt_map, qproc->qaccept_axi); mba_load_err = true; reclaim_mba: xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, true, @@ -1047,6 +1165,8 @@ static void q6v5_mba_reclaim(struct q6v5 *qproc) qproc->dp_size = 0; q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_q6); + if (qproc->has_vq6) + q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_vq6); q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_modem); q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_nc); if (qproc->version == MSS_MSM8996) { @@ -1059,6 +1179,24 @@ static void q6v5_mba_reclaim(struct q6v5 *qproc) writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG); } + if (qproc->has_ext_cntl_regs) { + regmap_write(qproc->conn_map, qproc->rscc_disable, 1); + + ret = regmap_read_poll_timeout(qproc->halt_map, qproc->axim1_clk_off, val, + !val, 1, Q6SS_CBCR_TIMEOUT_US); + if (ret) + dev_err(qproc->dev, "failed to enable axim1 clock\n"); + + ret = regmap_read_poll_timeout(qproc->halt_map, qproc->crypto_clk_off, val, + !val, 1, Q6SS_CBCR_TIMEOUT_US); + if (ret) + dev_err(qproc->dev, "failed to enable crypto clock\n"); + } + + q6v5proc_disable_qchannel(qproc, qproc->halt_map, qproc->qaccept_mdm); + q6v5proc_disable_qchannel(qproc, qproc->halt_map, qproc->qaccept_cx); + q6v5proc_disable_qchannel(qproc, qproc->halt_map, qproc->qaccept_axi); + q6v5_reset_assert(qproc); q6v5_clk_disable(qproc->dev, qproc->reset_clks, @@ -1471,6 +1609,7 @@ static int q6v5_init_mem(struct q6v5 *qproc, struct platform_device *pdev) { struct of_phandle_args args; struct resource *res; + int halt_cell_cnt = 3; int ret; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qdsp6"); @@ -1483,8 +1622,11 @@ static int q6v5_init_mem(struct q6v5 *qproc, struct platform_device *pdev) if (IS_ERR(qproc->rmb_base)) return PTR_ERR(qproc->rmb_base); + if (qproc->has_vq6) + halt_cell_cnt++; + ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node, - "qcom,halt-regs", 3, 0, &args); + "qcom,halt-regs", halt_cell_cnt, 0, &args); if (ret < 0) { dev_err(&pdev->dev, "failed to parse qcom,halt-regs\n"); return -EINVAL; @@ -1499,6 +1641,52 @@ static int q6v5_init_mem(struct q6v5 *qproc, struct platform_device *pdev) qproc->halt_modem = args.args[1]; qproc->halt_nc = args.args[2]; + if (qproc->has_vq6) + qproc->halt_vq6 = args.args[3]; + + if (qproc->has_qaccept_regs) { + ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node, + "qcom,qaccept-regs", + 3, 0, &args); + if (ret < 0) { + dev_err(&pdev->dev, "failed to parse qaccept-regs\n"); + return -EINVAL; + } + + qproc->qaccept_mdm = args.args[0]; + qproc->qaccept_cx = args.args[1]; + qproc->qaccept_axi = args.args[2]; + } + + if (qproc->has_ext_cntl_regs) { + ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node, + "qcom,ext-regs", + 2, 0, &args); + if (ret < 0) { + dev_err(&pdev->dev, "failed to parse ext-regs index 0\n"); + return -EINVAL; + } + + qproc->conn_map = syscon_node_to_regmap(args.np); + of_node_put(args.np); + if (IS_ERR(qproc->conn_map)) + return PTR_ERR(qproc->conn_map); + + qproc->force_clk_on = args.args[0]; + qproc->rscc_disable = args.args[1]; + + ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node, + "qcom,ext-regs", + 2, 1, &args); + if (ret < 0) { + dev_err(&pdev->dev, "failed to parse ext-regs index 1\n"); + return -EINVAL; + } + + qproc->axim1_clk_off = args.args[0]; + qproc->crypto_clk_off = args.args[1]; + } + if (qproc->has_spare_reg) { ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node, "qcom,spare-regs", @@ -1590,7 +1778,7 @@ static int q6v5_init_reset(struct q6v5 *qproc) return PTR_ERR(qproc->mss_restart); } - if (qproc->has_alt_reset || qproc->has_spare_reg) { + if (qproc->has_alt_reset || qproc->has_spare_reg || qproc->has_ext_cntl_regs) { qproc->pdc_reset = devm_reset_control_get_exclusive(qproc->dev, "pdc_reset"); if (IS_ERR(qproc->pdc_reset)) { @@ -1697,6 +1885,9 @@ static int q6v5_probe(struct platform_device *pdev) platform_set_drvdata(pdev, qproc); + qproc->has_qaccept_regs = desc->has_qaccept_regs; + qproc->has_ext_cntl_regs = desc->has_ext_cntl_regs; + qproc->has_vq6 = desc->has_vq6; qproc->has_spare_reg = desc->has_spare_reg; ret = q6v5_init_mem(qproc, pdev); if (ret) @@ -1857,9 +2048,39 @@ static const struct rproc_hexagon_res sc7180_mss = { .has_alt_reset = false, .has_mba_logs = true, .has_spare_reg = true, + .has_qaccept_regs = false, + .has_ext_cntl_regs = false, + .has_vq6 = false, .version = MSS_SC7180, }; +static const struct rproc_hexagon_res sc7280_mss = { + .hexagon_mba_image = "mba.mbn", + .proxy_clk_names = (char*[]){ + "xo", + NULL + }, + .active_clk_names = (char*[]){ + "iface", + "offline", + "snoc_axi", + NULL + }, + .proxy_pd_names = (char*[]){ + "cx", + "mss", + NULL + }, + .need_mem_protection = true, + .has_alt_reset = false, + .has_mba_logs = true, + .has_spare_reg = false, + .has_qaccept_regs = true, + .has_ext_cntl_regs = true, + .has_vq6 = true, + .version = MSS_SC7280, +}; + static const struct rproc_hexagon_res sdm845_mss = { .hexagon_mba_image = "mba.mbn", .proxy_clk_names = (char*[]){ @@ -1889,6 +2110,9 @@ static const struct rproc_hexagon_res sdm845_mss = { .has_alt_reset = true, .has_mba_logs = false, .has_spare_reg = false, + .has_qaccept_regs = false, + .has_ext_cntl_regs = false, + .has_vq6 = false, .version = MSS_SDM845, }; @@ -1917,6 +2141,9 @@ static const struct rproc_hexagon_res msm8998_mss = { .has_alt_reset = false, .has_mba_logs = false, .has_spare_reg = false, + .has_qaccept_regs = false, + .has_ext_cntl_regs = false, + .has_vq6 = false, .version = MSS_MSM8998, }; @@ -1948,6 +2175,9 @@ static const struct rproc_hexagon_res msm8996_mss = { .has_alt_reset = false, .has_mba_logs = false, .has_spare_reg = false, + .has_qaccept_regs = false, + .has_ext_cntl_regs = false, + .has_vq6 = false, .version = MSS_MSM8996, }; @@ -1990,6 +2220,9 @@ static const struct rproc_hexagon_res msm8916_mss = { .has_alt_reset = false, .has_mba_logs = false, .has_spare_reg = false, + .has_qaccept_regs = false, + .has_ext_cntl_regs = false, + .has_vq6 = false, .version = MSS_MSM8916, }; @@ -2040,6 +2273,9 @@ static const struct rproc_hexagon_res msm8974_mss = { .has_alt_reset = false, .has_mba_logs = false, .has_spare_reg = false, + .has_qaccept_regs = false, + .has_ext_cntl_regs = false, + .has_vq6 = false, .version = MSS_MSM8974, }; @@ -2050,6 +2286,7 @@ static const struct of_device_id q6v5_of_match[] = { { .compatible = "qcom,msm8996-mss-pil", .data = &msm8996_mss}, { .compatible = "qcom,msm8998-mss-pil", .data = &msm8998_mss}, { .compatible = "qcom,sc7180-mss-pil", .data = &sc7180_mss}, + { .compatible = "qcom,sc7280-mss-pil", .data = &sc7280_mss}, { .compatible = "qcom,sdm845-mss-pil", .data = &sdm845_mss}, { }, }; -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2021-06-24 19:49 UTC|newest] Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-06-24 19:47 [PATCH 0/9] Add Modem support on SC7280 SoCs Sibi Sankar 2021-06-24 19:47 ` [PATCH 1/9] dt-bindings: remoteproc: qcom: pas: Add SC7280 MPSS support Sibi Sankar 2021-06-25 17:12 ` Matthias Kaehlcke 2021-06-25 17:28 ` Sibi Sankar 2021-06-25 23:20 ` Matthias Kaehlcke 2021-07-14 19:36 ` Rob Herring 2021-06-24 19:47 ` [PATCH 2/9] remoteproc: qcom: pas: Add SC7280 Modem support Sibi Sankar 2021-06-25 23:23 ` Matthias Kaehlcke 2021-06-24 19:47 ` [PATCH 3/9] dt-bindings: remoteproc: qcom: Add Q6V5 Modem PIL binding Sibi Sankar 2021-06-25 23:43 ` Matthias Kaehlcke 2021-06-30 19:57 ` Sibi Sankar 2021-07-14 19:37 ` Rob Herring 2021-06-24 19:47 ` [PATCH 4/9] iommu/arm-smmu-qcom: Request direct mapping for modem device Sibi Sankar 2021-06-25 4:27 ` Sai Prakash Ranjan 2021-06-24 19:47 ` Sibi Sankar [this message] 2021-06-25 0:35 ` [PATCH 5/9] remoteproc: mss: q6v5-mss: Add modem support on SC7280 Matthias Kaehlcke 2021-06-25 14:21 ` Sibi Sankar 2021-06-25 16:39 ` Matthias Kaehlcke 2021-06-24 19:47 ` [PATCH 6/9] arm64: dts: qcom: sc7280: Update reserved memory map Sibi Sankar 2021-06-28 18:11 ` Matthias Kaehlcke 2021-06-30 20:02 ` Sibi Sankar 2021-07-30 18:24 ` Bjorn Andersson 2021-06-24 19:47 ` [PATCH 7/9] arm64: dts: qcom: sc7280: Add nodes to boot modem Sibi Sankar 2021-07-30 18:00 ` Bjorn Andersson 2021-06-24 19:47 ` [PATCH 8/9] arm64: dts: qcom: sc7280: Add Q6V5 MSS node Sibi Sankar 2021-06-28 18:39 ` Matthias Kaehlcke 2021-06-30 20:03 ` Sibi Sankar 2021-07-30 18:01 ` Bjorn Andersson 2021-06-24 19:47 ` [PATCH 9/9] arm64: dts: qcom: sc7280: Update " Sibi Sankar 2021-06-28 19:05 ` Matthias Kaehlcke 2021-06-30 20:08 ` Sibi Sankar 2021-07-30 18:14 ` Bjorn Andersson 2021-07-01 20:02 ` [PATCH 0/9] Add Modem support on SC7280 SoCs Pavel Machek
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1624564058-24095-6-git-send-email-sibis@codeaurora.org \ --to=sibis@codeaurora.org \ --cc=agross@kernel.org \ --cc=bjorn.andersson@linaro.org \ --cc=devicetree@vger.kernel.org \ --cc=dianders@chromium.org \ --cc=evgreen@chromium.org \ --cc=joro@8bytes.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-remoteproc@vger.kernel.org \ --cc=mathieu.poirier@linaro.org \ --cc=ohad@wizery.com \ --cc=p.zabel@pengutronix.de \ --cc=robh+dt@kernel.org \ --cc=robin.murphy@arm.com \ --cc=saiprakash.ranjan@codeaurora.org \ --cc=swboyd@chromium.org \ --cc=will@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).