LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Fenglin Wu <quic_fenglinw@quicinc.com>
To: <linux-arm-msm@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	"Stephen Boyd" <sboyd@kernel.org>
Cc: <collinsd@codeaurora.org>, <subbaram@codeaurora.org>,
	<quic_fenglinw@quicinc.com>
Subject: [spmi-pmic-arb fixes and optimization patches V1 2/9] spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
Date: Wed, 28 Jul 2021 12:30:02 +0800	[thread overview]
Message-ID: <1627446609-9064-3-git-send-email-quic_fenglinw@quicinc.com> (raw)
In-Reply-To: <1627446609-9064-1-git-send-email-quic_fenglinw@quicinc.com>

From: Subbaraman Narayanamurthy <subbaram@codeaurora.org>

Currently, cleanup_irq() is invoked when a peripheral's interrupt
fires and there is no mapping present in the interrupt domain of
spmi interrupt controller.

The cleanup_irq clears the arbiter bit, clears the pmic interrupt
and disables it at the pmic in that order. The last disable in
cleanup_irq races with request_irq() in that it stomps over the
enable issued by request_irq. Fix this by not writing to the pmic
in cleanup_irq. The latched bit will be left set in the pmic,
which will not send us more interrupts even if the enable bit
stays enabled.

When a client wants to request an interrupt, use the activate
callback on the irq_domain to clear latched bit. This ensures
that the latched, if set due to the above changes in cleanup_irq
or when the bootloader leaves it set, gets cleaned up, paving way
for upcoming interrupts to trigger.

With this, there is a possibility of unwanted triggering of
interrupt right after the latched bit is cleared - the interrupt
may be left enabled too. To avoid that, clear the enable first
followed by clearing the latched bit in the activate callback.

Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
[collinsd@codeaurora.org: fix merge conflict]
Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
---
 drivers/spmi/spmi-pmic-arb.c | 15 +++++----------
 1 file changed, 5 insertions(+), 10 deletions(-)

diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
index 295e19f..4d7ad004 100644
--- a/drivers/spmi/spmi-pmic-arb.c
+++ b/drivers/spmi/spmi-pmic-arb.c
@@ -492,16 +492,6 @@ static void cleanup_irq(struct spmi_pmic_arb *pmic_arb, u16 apid, int id)
 	dev_err_ratelimited(&pmic_arb->spmic->dev, "%s apid=%d sid=0x%x per=0x%x irq=%d\n",
 			__func__, apid, sid, per, id);
 	writel_relaxed(irq_mask, pmic_arb->ver_ops->irq_clear(pmic_arb, apid));
-
-	if (pmic_arb_write_cmd(pmic_arb->spmic, SPMI_CMD_EXT_WRITEL, sid,
-			(per << 8) + QPNPINT_REG_LATCHED_CLR, &irq_mask, 1))
-		dev_err_ratelimited(&pmic_arb->spmic->dev, "failed to ack irq_mask = 0x%x for ppid = %x\n",
-				irq_mask, ppid);
-
-	if (pmic_arb_write_cmd(pmic_arb->spmic, SPMI_CMD_EXT_WRITEL, sid,
-			       (per << 8) + QPNPINT_REG_EN_CLR, &irq_mask, 1))
-		dev_err_ratelimited(&pmic_arb->spmic->dev, "failed to ack irq_mask = 0x%x for ppid = %x\n",
-				irq_mask, ppid);
 }
 
 static void periph_interrupt(struct spmi_pmic_arb *pmic_arb, u16 apid)
@@ -667,6 +657,7 @@ static int qpnpint_irq_domain_activate(struct irq_domain *domain,
 	u16 apid = hwirq_to_apid(d->hwirq);
 	u16 sid = hwirq_to_sid(d->hwirq);
 	u16 irq = hwirq_to_irq(d->hwirq);
+	u8 buf;
 
 	if (pmic_arb->apid_data[apid].irq_ee != pmic_arb->ee) {
 		dev_err(&pmic_arb->spmic->dev, "failed to xlate sid = %#x, periph = %#x, irq = %u: ee=%u but owner=%u\n",
@@ -675,6 +666,10 @@ static int qpnpint_irq_domain_activate(struct irq_domain *domain,
 		return -ENODEV;
 	}
 
+	buf = BIT(irq);
+	qpnpint_spmi_write(d, QPNPINT_REG_EN_CLR, &buf, 1);
+	qpnpint_spmi_write(d, QPNPINT_REG_LATCHED_CLR, &buf, 1);
+
 	return 0;
 }
 
-- 
Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.


  parent reply	other threads:[~2021-07-28  4:30 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-28  4:30 [spmi-pmic-arb fixes and optimization patches V1 0/9] *** SUBJECT HERE *** Fenglin Wu
2021-07-28  4:30 ` [spmi-pmic-arb fixes and optimization patches V1 1/9] spmi: pmic-arb: add a print in cleanup_irq Fenglin Wu
2021-07-28  4:30 ` Fenglin Wu [this message]
2021-07-28  4:30 ` [spmi-pmic-arb fixes and optimization patches V1 3/9] spmi: pmic-arb: check apid against limits before calling irq handler Fenglin Wu
2021-07-28  4:30 ` [spmi-pmic-arb fixes and optimization patches V1 4/9] spmi: pmic-arb: add support to dispatch interrupt based on IRQ status Fenglin Wu
2021-07-28  4:30 ` [spmi-pmic-arb fixes and optimization patches V1 5/9] spmi: pmic-arb: correct duplicate APID to PPID mapping logic Fenglin Wu
2021-07-28  4:30 ` [spmi-pmic-arb fixes and optimization patches V1 6/9] spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes Fenglin Wu
2021-07-28  4:30 ` [spmi-pmic-arb fixes and optimization patches V1 7/9] spmi: pmic-arb: support updating interrupt type flags Fenglin Wu
2021-07-28  4:30 ` [spmi-pmic-arb fixes and optimization patches V1 8/9] spmi: pmic-arb: make interrupt support optional Fenglin Wu
2021-07-28  4:30 ` [spmi-pmic-arb fixes and optimization patches V1 9/9] spmi: pmic-arb: increase SPMI transaction timeout delay Fenglin Wu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1627446609-9064-3-git-send-email-quic_fenglinw@quicinc.com \
    --to=quic_fenglinw@quicinc.com \
    --cc=collinsd@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sboyd@kernel.org \
    --cc=subbaram@codeaurora.org \
    --subject='Re: [spmi-pmic-arb fixes and optimization patches V1 2/9] spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).