LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH v5 00/13] Use qmp_send to update co-processor load state
@ 2021-08-19  3:02 Sibi Sankar
  2021-08-19  3:02 ` [PATCH v5 01/13] dt-bindings: soc: qcom: aoss: Drop the load state power-domain Sibi Sankar
                   ` (12 more replies)
  0 siblings, 13 replies; 20+ messages in thread
From: Sibi Sankar @ 2021-08-19  3:02 UTC (permalink / raw)
  To: mka, swboyd, bjorn.andersson, robh+dt
  Cc: ulf.hansson, rjw, agross, ohad, mathieu.poirier, linux-arm-msm,
	linux-remoteproc, devicetree, linux-kernel, dianders, rishabhb,
	sidgup, Sibi Sankar

The power domains exposed by the AOSS QMP driver control the load state
resources linked to modem, adsp, cdsp remoteprocs. These are used to
notify the Always on Subsystem (AOSS) that a particular co-processor is
up/down. AOSS uses this information to wait for the co-processors to
suspend before starting its sleep sequence. These co-processors enter
low-power modes independent to that of the application processor and
the load state resources linked to them are expected to remain unaltered
across system suspend/resume cycles. To achieve this behavior let's stop
modeling them as power-domains and replace them with generic qmp_send
interface instead.

https://lore.kernel.org/lkml/20200913034603.GV3715@yoga/
Previous discussion on dropping power-domain support from AOSS QMP driver

Depends on:
qmp_send: https://patchwork.kernel.org/project/linux-arm-msm/cover/1629113954-14084-1-git-send-email-deesin@codeaurora.org/

V5:
 * Fixup power-domain count (patch 2). [Matthias]
 * Add WARN_ON on truncation, remove redundant initialization
   code, use dev_err_probe (patch 4). [Stephen]
 * Use devm_kstrdup, handle kstrdup failure due to
   no memory and set qmp to NULL when not available
   (patch 4). [Bjorn]

V4:
 * Rebase patch 1 due to the aoss-qmp yaml conversion (Dropping Rb).
 * Commit message change and sc8180x co-processor addition
   to patch 2. [Rob/Bjorn]
 * Drop unused pdev and kfree the load state string in q6v5_deinit
   /probe path for patch 4. [Matthias]
 * Replaced "binding" with "property" across the series. [Matthias]
 * Commit message change and drop incorrect cleanup on cooling
   device probe failures. [Matthias]

V3:
 * Misc. documentation fixes [patch 2]:
  - Reduce power-domain maxItems due to load_state pd removal
  - Combine compatibles where possible with the load_state pd removal
  - Fixup the qcom,qmp ref to phandle type

V2:
 * load_state is currently broken on mainline so be safely dropped
   without side-effects.
 * Rebased on top of qmp_send v3 series.
 * Dropped R-b from Stephen and Rob on patch 3 due to the yaml
   conversion.
 * New patch [12] to drop unused aoss-qmp header.
 * Commit message update [patch 1] [Rob]
 * Reorder the series [Stephen]

Sibi Sankar (13):
  dt-bindings: soc: qcom: aoss: Drop the load state power-domain
  dt-bindings: remoteproc: qcom: pas: Add QMP property
  dt-bindings: remoteproc: qcom: Add QMP property
  remoteproc: qcom: q6v5: Use qmp_send to update co-processor load state
  arm64: dts: qcom: sc7180: Use QMP property to control load state
  arm64: dts: qcom: sc7280: Use QMP property to control load state
  arm64: dts: qcom: sdm845: Use QMP property to control load state
  arm64: dts: qcom: sm8150: Use QMP property to control load state
  arm64: dts: qcom: sm8250: Use QMP property to control load state
  arm64: dts: qcom: sm8350: Use QMP property to control load state
  soc: qcom: aoss: Drop power domain support
  dt-bindings: msm/dp: Remove aoss-qmp header
  dt-bindings: soc: qcom: aoss: Delete unused power-domain definitions

 .../bindings/display/msm/dp-controller.yaml        |   1 -
 .../devicetree/bindings/remoteproc/qcom,adsp.yaml  |  61 ++++++------
 .../devicetree/bindings/remoteproc/qcom,q6v5.txt   |   7 +-
 .../bindings/soc/qcom/qcom,aoss-qmp.yaml           |  11 +--
 arch/arm64/boot/dts/qcom/sc7180.dtsi               |   9 +-
 arch/arm64/boot/dts/qcom/sc7280.dtsi               |   2 -
 arch/arm64/boot/dts/qcom/sdm845.dtsi               |   8 +-
 arch/arm64/boot/dts/qcom/sm8150.dtsi               |  28 +++---
 arch/arm64/boot/dts/qcom/sm8250.dtsi               |  22 ++---
 arch/arm64/boot/dts/qcom/sm8350.dtsi               |  30 +++---
 drivers/remoteproc/qcom_q6v5.c                     |  57 ++++++++++-
 drivers/remoteproc/qcom_q6v5.h                     |   7 +-
 drivers/remoteproc/qcom_q6v5_adsp.c                |   7 +-
 drivers/remoteproc/qcom_q6v5_mss.c                 |  44 ++-------
 drivers/remoteproc/qcom_q6v5_pas.c                 |  85 ++++------------
 drivers/remoteproc/qcom_q6v5_wcss.c                |   4 +-
 drivers/soc/qcom/qcom_aoss.c                       | 107 ---------------------
 include/dt-bindings/power/qcom-aoss-qmp.h          |  14 ---
 18 files changed, 183 insertions(+), 321 deletions(-)
 delete mode 100644 include/dt-bindings/power/qcom-aoss-qmp.h

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 20+ messages in thread

* [PATCH v5 01/13] dt-bindings: soc: qcom: aoss: Drop the load state power-domain
  2021-08-19  3:02 [PATCH v5 00/13] Use qmp_send to update co-processor load state Sibi Sankar
@ 2021-08-19  3:02 ` Sibi Sankar
  2021-08-19  3:02 ` [PATCH v5 02/13] dt-bindings: remoteproc: qcom: pas: Add QMP property Sibi Sankar
                   ` (11 subsequent siblings)
  12 siblings, 0 replies; 20+ messages in thread
From: Sibi Sankar @ 2021-08-19  3:02 UTC (permalink / raw)
  To: mka, swboyd, bjorn.andersson, robh+dt
  Cc: ulf.hansson, rjw, agross, ohad, mathieu.poirier, linux-arm-msm,
	linux-remoteproc, devicetree, linux-kernel, dianders, rishabhb,
	sidgup, Sibi Sankar

The power-domains exposed by AOSS QMP node are used to notify the Always
on Subsystem (AOSS) that a particular co-processor is up/down. These
co-processors enter low-power modes independent to that of the application
processor and their states are expected to remain unaltered across system
suspend/resume cycles. To achieve this behavior let's drop the load
power-domain and replace them with generic qmp_send interface instead.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml | 11 +----------
 1 file changed, 1 insertion(+), 10 deletions(-)

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml
index 93e4b737ee1b..c55e98fc14fa 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml
@@ -19,8 +19,7 @@ description:
 
   The AOSS side channel exposes control over a set of resources, used to control
   a set of debug related clocks and to affect the low power state of resources
-  related to the secondary subsystems. These resources are exposed as a set of
-  power-domains.
+  related to the secondary subsystems.
 
 properties:
   compatible:
@@ -57,13 +56,6 @@ properties:
     description:
       The single clock represents the QDSS clock.
 
-  "#power-domain-cells":
-    const: 1
-    description: |
-        The provided power-domains are:
-        CDSP state (0), LPASS state (1), modem state (2), SLPI
-        state (3), SPSS state (4) and Venus state (5).
-
 required:
   - compatible
   - reg
@@ -101,7 +93,6 @@ examples:
       mboxes = <&apss_shared 0>;
 
       #clock-cells = <0>;
-      #power-domain-cells = <1>;
 
       cx_cdev: cx {
         #cooling-cells = <2>;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 20+ messages in thread

* [PATCH v5 02/13] dt-bindings: remoteproc: qcom: pas: Add QMP property
  2021-08-19  3:02 [PATCH v5 00/13] Use qmp_send to update co-processor load state Sibi Sankar
  2021-08-19  3:02 ` [PATCH v5 01/13] dt-bindings: soc: qcom: aoss: Drop the load state power-domain Sibi Sankar
@ 2021-08-19  3:02 ` Sibi Sankar
  2021-08-19 18:55   ` Stephen Boyd
  2021-08-19  3:02 ` [PATCH v5 03/13] dt-bindings: remoteproc: qcom: " Sibi Sankar
                   ` (10 subsequent siblings)
  12 siblings, 1 reply; 20+ messages in thread
From: Sibi Sankar @ 2021-08-19  3:02 UTC (permalink / raw)
  To: mka, swboyd, bjorn.andersson, robh+dt
  Cc: ulf.hansson, rjw, agross, ohad, mathieu.poirier, linux-arm-msm,
	linux-remoteproc, devicetree, linux-kernel, dianders, rishabhb,
	sidgup, Sibi Sankar

The load state power-domain, used by the co-processors to notify the
Always on Subsystem (AOSS) that a particular co-processor is up/down,
suffers from the side-effect of changing states during suspend/resume.
However the co-processors enter low-power modes independent to that of
the application processor and their states are expected to remain
unaltered across system suspend/resume cycles. To achieve this behavior
let's drop the load state power-domain and replace them with the qmp
property for all SoCs supporting low power mode signalling.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
---

v5:
 * Fixup power-domain count. [Matthias]

 .../devicetree/bindings/remoteproc/qcom,adsp.yaml  | 61 +++++++++++-----------
 1 file changed, 31 insertions(+), 30 deletions(-)

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
index 0c112f3264a9..0d2b5bd4907a 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
@@ -93,6 +93,10 @@ properties:
     maxItems: 1
     description: Reference to the reserved-memory for the Hexagon core
 
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Reference to the AOSS side-channel message RAM.
+
   qcom,smem-states:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     description: States used by the AP to signal the Hexagon core
@@ -369,13 +373,11 @@ allOf:
       properties:
         power-domains:
           items:
-            - description: Load State power domain
             - description: CX power domain
             - description: MX power domain
             - description: MSS power domain
         power-domain-names:
           items:
-            - const: load_state
             - const: cx
             - const: mx
             - const: mss
@@ -391,43 +393,20 @@ allOf:
       properties:
         power-domains:
           items:
-            - description: Load State power domain
             - description: CX power domain
-        power-domain-names:
-          items:
-            - const: load_state
-            - const: cx
 
   - if:
       properties:
         compatible:
           contains:
             enum:
+              - qcom,sdx55-mpss-pas
               - qcom,sm8150-mpss-pas
               - qcom,sm8350-mpss-pas
     then:
       properties:
         power-domains:
           items:
-            - description: Load State power domain
-            - description: CX power domain
-            - description: MSS power domain
-        power-domain-names:
-          items:
-            - const: load_state
-            - const: cx
-            - const: mss
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sdx55-mpss-pas
-    then:
-      properties:
-        power-domains:
-          items:
             - description: CX power domain
             - description: MSS power domain
         power-domain-names:
@@ -451,12 +430,10 @@ allOf:
       properties:
         power-domains:
           items:
-            - description: Load State power domain
             - description: LCX power domain
             - description: LMX power domain
         power-domain-names:
           items:
-            - const: load_state
             - const: lcx
             - const: lmx
 
@@ -470,12 +447,10 @@ allOf:
       properties:
         power-domains:
           items:
-            - description: Load State power domain
             - description: CX power domain
             - description: MXC power domain
         power-domain-names:
           items:
-            - const: load_state
             - const: cx
             - const: mxc
 
@@ -511,6 +486,32 @@ allOf:
             - const: mss_restart
             - const: pdc_reset
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7180-mpss-pas
+              - qcom,sc8180x-adsp-pas
+              - qcom,sc8180x-cdsp-pas
+              - qcom,sc8180x-mpss-pas
+              - qcom,sm8150-adsp-pas
+              - qcom,sm8150-cdsp-pas
+              - qcom,sm8150-mpss-pas
+              - qcom,sm8150-slpi-pas
+              - qcom,sm8250-adsp-pas
+              - qcom,sm8250-cdsp-pas
+              - qcom,sm8250-slpi-pas
+              - qcom,sm8350-adsp-pas
+              - qcom,sm8350-cdsp-pas
+              - qcom,sm8350-mpss-pas
+              - qcom,sm8350-slpi-pas
+    then:
+      properties:
+        qcom,qmp:
+          items:
+            - description: Reference to the AOSS side-channel message RAM.
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmcc.h>
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 20+ messages in thread

* [PATCH v5 03/13] dt-bindings: remoteproc: qcom: Add QMP property
  2021-08-19  3:02 [PATCH v5 00/13] Use qmp_send to update co-processor load state Sibi Sankar
  2021-08-19  3:02 ` [PATCH v5 01/13] dt-bindings: soc: qcom: aoss: Drop the load state power-domain Sibi Sankar
  2021-08-19  3:02 ` [PATCH v5 02/13] dt-bindings: remoteproc: qcom: pas: Add QMP property Sibi Sankar
@ 2021-08-19  3:02 ` Sibi Sankar
  2021-08-19  3:02 ` [PATCH v5 04/13] remoteproc: qcom: q6v5: Use qmp_send to update co-processor load state Sibi Sankar
                   ` (9 subsequent siblings)
  12 siblings, 0 replies; 20+ messages in thread
From: Sibi Sankar @ 2021-08-19  3:02 UTC (permalink / raw)
  To: mka, swboyd, bjorn.andersson, robh+dt
  Cc: ulf.hansson, rjw, agross, ohad, mathieu.poirier, linux-arm-msm,
	linux-remoteproc, devicetree, linux-kernel, dianders, rishabhb,
	sidgup, Sibi Sankar

Add Qualcomm Mailbox Protocol (QMP) property to replace the power domain
exposed by the AOSS QMP node.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
index 69c49c7b2cff..494257010629 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
@@ -174,7 +174,12 @@ For the compatible string below the following supplies are required:
 		    must be "cx", "mx"
 	qcom,sc7180-mss-pil:
 	qcom,sdm845-mss-pil:
-		    must be "cx", "mx", "mss", "load_state"
+		    must be "cx", "mx", "mss"
+
+- qcom,qmp:
+	Usage: optional
+	Value type: <phandle>
+	Definition: reference to the AOSS side-channel message RAM.
 
 - qcom,smem-states:
 	Usage: required
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 20+ messages in thread

* [PATCH v5 04/13] remoteproc: qcom: q6v5: Use qmp_send to update co-processor load state
  2021-08-19  3:02 [PATCH v5 00/13] Use qmp_send to update co-processor load state Sibi Sankar
                   ` (2 preceding siblings ...)
  2021-08-19  3:02 ` [PATCH v5 03/13] dt-bindings: remoteproc: qcom: " Sibi Sankar
@ 2021-08-19  3:02 ` Sibi Sankar
  2021-08-23 20:17   ` Stephen Boyd
  2021-08-19  3:02 ` [PATCH v5 05/13] arm64: dts: qcom: sc7180: Use QMP property to control " Sibi Sankar
                   ` (8 subsequent siblings)
  12 siblings, 1 reply; 20+ messages in thread
From: Sibi Sankar @ 2021-08-19  3:02 UTC (permalink / raw)
  To: mka, swboyd, bjorn.andersson, robh+dt
  Cc: ulf.hansson, rjw, agross, ohad, mathieu.poirier, linux-arm-msm,
	linux-remoteproc, devicetree, linux-kernel, dianders, rishabhb,
	sidgup, Sibi Sankar

The power domains exposed by the AOSS QMP driver control the load state
resources linked to modem, adsp, cdsp remoteprocs. These are used to
notify the Always on Subsystem (AOSS) that a particular co-processor is
up/down. AOSS uses this information to wait for the co-processors to
suspend before starting its sleep sequence.

These co-processors enter low-power modes independent to that of the
application processor and the load state resources linked to them are
expected to remain unaltered across system suspend/resume cycles. To
achieve this behavior lets stop using the power-domains exposed by the
AOSS QMP node and replace them with generic qmp_send interface instead.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
---

v5:
 * Add WARN_ON on truncation, remove redundant initialization
   code, use dev_err_probe. [Stephen]
 * Use devm_kstrdup, handle kstrdup failure due to no memory
   and set qmp to NULL when not available. [Bjorn]

 drivers/remoteproc/qcom_q6v5.c      | 57 ++++++++++++++++++++++++-
 drivers/remoteproc/qcom_q6v5.h      |  7 ++-
 drivers/remoteproc/qcom_q6v5_adsp.c |  7 ++-
 drivers/remoteproc/qcom_q6v5_mss.c  | 44 ++++---------------
 drivers/remoteproc/qcom_q6v5_pas.c  | 85 +++++++++----------------------------
 drivers/remoteproc/qcom_q6v5_wcss.c |  4 +-
 6 files changed, 96 insertions(+), 108 deletions(-)

diff --git a/drivers/remoteproc/qcom_q6v5.c b/drivers/remoteproc/qcom_q6v5.c
index 7e9244c748da..eada7e34f3af 100644
--- a/drivers/remoteproc/qcom_q6v5.c
+++ b/drivers/remoteproc/qcom_q6v5.c
@@ -16,8 +16,30 @@
 #include "qcom_common.h"
 #include "qcom_q6v5.h"
 
+#define Q6V5_LOAD_STATE_MSG_LEN	64
 #define Q6V5_PANIC_DELAY_MS	200
 
+static int q6v5_load_state_toggle(struct qcom_q6v5 *q6v5, bool enable)
+{
+	char buf[Q6V5_LOAD_STATE_MSG_LEN];
+	int ret;
+
+	if (!q6v5->qmp)
+		return 0;
+
+	ret = snprintf(buf, sizeof(buf),
+		       "{class: image, res: load_state, name: %s, val: %s}",
+		       q6v5->load_state, enable ? "on" : "off");
+
+	WARN_ON(ret >= Q6V5_LOAD_STATE_MSG_LEN);
+
+	ret = qmp_send(q6v5->qmp, buf, sizeof(buf));
+	if (ret)
+		dev_err(q6v5->dev, "failed to toggle load state\n");
+
+	return ret;
+}
+
 /**
  * qcom_q6v5_prepare() - reinitialize the qcom_q6v5 context before start
  * @q6v5:	reference to qcom_q6v5 context to be reinitialized
@@ -26,6 +48,12 @@
  */
 int qcom_q6v5_prepare(struct qcom_q6v5 *q6v5)
 {
+	int ret;
+
+	ret = q6v5_load_state_toggle(q6v5, true);
+	if (ret)
+		return ret;
+
 	reinit_completion(&q6v5->start_done);
 	reinit_completion(&q6v5->stop_done);
 
@@ -47,6 +75,7 @@ EXPORT_SYMBOL_GPL(qcom_q6v5_prepare);
 int qcom_q6v5_unprepare(struct qcom_q6v5 *q6v5)
 {
 	disable_irq(q6v5->handover_irq);
+	q6v5_load_state_toggle(q6v5, false);
 
 	return !q6v5->handover_issued;
 }
@@ -196,12 +225,13 @@ EXPORT_SYMBOL_GPL(qcom_q6v5_panic);
  * @pdev:	platform_device reference for acquiring resources
  * @rproc:	associated remoteproc instance
  * @crash_reason: SMEM id for crash reason string, or 0 if none
+ * @load_state: load state resource string
  * @handover:	function to be called when proxy resources should be released
  *
  * Return: 0 on success, negative errno on failure
  */
 int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
-		   struct rproc *rproc, int crash_reason,
+		   struct rproc *rproc, int crash_reason, const char *load_state,
 		   void (*handover)(struct qcom_q6v5 *q6v5))
 {
 	int ret;
@@ -286,9 +316,34 @@ int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
 		return PTR_ERR(q6v5->state);
 	}
 
+	q6v5->load_state = devm_kstrdup_const(&pdev->dev, load_state, GFP_KERNEL);
+	q6v5->qmp = qmp_get(&pdev->dev);
+	if (IS_ERR(q6v5->qmp)) {
+		if (PTR_ERR(q6v5->qmp) != -ENODEV)
+			return dev_err_probe(&pdev->dev, PTR_ERR(q6v5->qmp),
+					     "failed to acquire load state\n");
+		q6v5->qmp = NULL;
+	} else if (!q6v5->load_state) {
+		if (!load_state)
+			dev_err(&pdev->dev, "load state resource string empty\n");
+
+		qmp_put(q6v5->qmp);
+		return load_state ? -ENOMEM : -EINVAL;
+	}
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(qcom_q6v5_init);
 
+/**
+ * qcom_q6v5_deinit() - deinitialize the q6v5 common struct
+ * @q6v5:	reference to qcom_q6v5 context to be deinitialized
+ */
+void qcom_q6v5_deinit(struct qcom_q6v5 *q6v5)
+{
+	qmp_put(q6v5->qmp);
+}
+EXPORT_SYMBOL_GPL(qcom_q6v5_deinit);
+
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("Qualcomm Peripheral Image Loader for Q6V5");
diff --git a/drivers/remoteproc/qcom_q6v5.h b/drivers/remoteproc/qcom_q6v5.h
index 1c212f670cbc..f35e04471ed7 100644
--- a/drivers/remoteproc/qcom_q6v5.h
+++ b/drivers/remoteproc/qcom_q6v5.h
@@ -5,6 +5,7 @@
 
 #include <linux/kernel.h>
 #include <linux/completion.h>
+#include <linux/soc/qcom/qcom_aoss.h>
 
 struct rproc;
 struct qcom_smem_state;
@@ -15,6 +16,8 @@ struct qcom_q6v5 {
 	struct rproc *rproc;
 
 	struct qcom_smem_state *state;
+	struct qmp *qmp;
+
 	unsigned stop_bit;
 
 	int wdog_irq;
@@ -32,12 +35,14 @@ struct qcom_q6v5 {
 
 	bool running;
 
+	const char *load_state;
 	void (*handover)(struct qcom_q6v5 *q6v5);
 };
 
 int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
-		   struct rproc *rproc, int crash_reason,
+		   struct rproc *rproc, int crash_reason, const char *load_state,
 		   void (*handover)(struct qcom_q6v5 *q6v5));
+void qcom_q6v5_deinit(struct qcom_q6v5 *q6v5);
 
 int qcom_q6v5_prepare(struct qcom_q6v5 *q6v5);
 int qcom_q6v5_unprepare(struct qcom_q6v5 *q6v5);
diff --git a/drivers/remoteproc/qcom_q6v5_adsp.c b/drivers/remoteproc/qcom_q6v5_adsp.c
index 8b0d8bbacd2e..098362e6e233 100644
--- a/drivers/remoteproc/qcom_q6v5_adsp.c
+++ b/drivers/remoteproc/qcom_q6v5_adsp.c
@@ -185,7 +185,9 @@ static int adsp_start(struct rproc *rproc)
 	int ret;
 	unsigned int val;
 
-	qcom_q6v5_prepare(&adsp->q6v5);
+	ret = qcom_q6v5_prepare(&adsp->q6v5);
+	if (ret)
+		return ret;
 
 	ret = clk_prepare_enable(adsp->xo);
 	if (ret)
@@ -465,7 +467,7 @@ static int adsp_probe(struct platform_device *pdev)
 	if (ret)
 		goto disable_pm;
 
-	ret = qcom_q6v5_init(&adsp->q6v5, pdev, rproc, desc->crash_reason_smem,
+	ret = qcom_q6v5_init(&adsp->q6v5, pdev, rproc, desc->crash_reason_smem, NULL,
 			     qcom_adsp_pil_handover);
 	if (ret)
 		goto disable_pm;
@@ -500,6 +502,7 @@ static int adsp_remove(struct platform_device *pdev)
 
 	rproc_del(adsp->rproc);
 
+	qcom_q6v5_deinit(&adsp->q6v5);
 	qcom_remove_glink_subdev(adsp->rproc, &adsp->glink_subdev);
 	qcom_remove_sysmon_subdev(adsp->sysmon);
 	qcom_remove_ssr_subdev(adsp->rproc, &adsp->ssr_subdev);
diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index 423b31dfa574..7a1422bd7925 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -137,7 +137,6 @@ struct rproc_hexagon_res {
 	char **proxy_clk_names;
 	char **reset_clk_names;
 	char **active_clk_names;
-	char **active_pd_names;
 	char **proxy_pd_names;
 	int version;
 	bool need_mem_protection;
@@ -169,12 +168,10 @@ struct q6v5 {
 	struct clk *active_clks[8];
 	struct clk *reset_clks[4];
 	struct clk *proxy_clks[4];
-	struct device *active_pds[1];
 	struct device *proxy_pds[3];
 	int active_clk_count;
 	int reset_clk_count;
 	int proxy_clk_count;
-	int active_pd_count;
 	int proxy_pd_count;
 
 	struct reg_info active_regs[1];
@@ -895,18 +892,14 @@ static int q6v5_mba_load(struct q6v5 *qproc)
 	int xfermemop_ret;
 	bool mba_load_err = false;
 
-	qcom_q6v5_prepare(&qproc->q6v5);
-
-	ret = q6v5_pds_enable(qproc, qproc->active_pds, qproc->active_pd_count);
-	if (ret < 0) {
-		dev_err(qproc->dev, "failed to enable active power domains\n");
-		goto disable_irqs;
-	}
+	ret = qcom_q6v5_prepare(&qproc->q6v5);
+	if (ret)
+		return ret;
 
 	ret = q6v5_pds_enable(qproc, qproc->proxy_pds, qproc->proxy_pd_count);
 	if (ret < 0) {
 		dev_err(qproc->dev, "failed to enable proxy power domains\n");
-		goto disable_active_pds;
+		goto disable_irqs;
 	}
 
 	ret = q6v5_regulator_enable(qproc, qproc->fallback_proxy_regs,
@@ -1039,8 +1032,6 @@ static int q6v5_mba_load(struct q6v5 *qproc)
 			       qproc->fallback_proxy_reg_count);
 disable_proxy_pds:
 	q6v5_pds_disable(qproc, qproc->proxy_pds, qproc->proxy_pd_count);
-disable_active_pds:
-	q6v5_pds_disable(qproc, qproc->active_pds, qproc->active_pd_count);
 disable_irqs:
 	qcom_q6v5_unprepare(&qproc->q6v5);
 
@@ -1076,7 +1067,6 @@ static void q6v5_mba_reclaim(struct q6v5 *qproc)
 			 qproc->active_clk_count);
 	q6v5_regulator_disable(qproc, qproc->active_regs,
 			       qproc->active_reg_count);
-	q6v5_pds_disable(qproc, qproc->active_pds, qproc->active_pd_count);
 
 	/* In case of failure or coredump scenario where reclaiming MBA memory
 	 * could not happen reclaim it here.
@@ -1756,14 +1746,6 @@ static int q6v5_probe(struct platform_device *pdev)
 	}
 	qproc->active_reg_count = ret;
 
-	ret = q6v5_pds_attach(&pdev->dev, qproc->active_pds,
-			      desc->active_pd_names);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Failed to attach active power domains\n");
-		goto free_rproc;
-	}
-	qproc->active_pd_count = ret;
-
 	ret = q6v5_pds_attach(&pdev->dev, qproc->proxy_pds,
 			      desc->proxy_pd_names);
 	/* Fallback to regulators for old device trees */
@@ -1773,12 +1755,12 @@ static int q6v5_probe(struct platform_device *pdev)
 					  desc->fallback_proxy_supply);
 		if (ret < 0) {
 			dev_err(&pdev->dev, "Failed to get fallback proxy regulators.\n");
-			goto detach_active_pds;
+			goto free_rproc;
 		}
 		qproc->fallback_proxy_reg_count = ret;
 	} else if (ret < 0) {
 		dev_err(&pdev->dev, "Failed to init power domains\n");
-		goto detach_active_pds;
+		goto free_rproc;
 	} else {
 		qproc->proxy_pd_count = ret;
 	}
@@ -1792,7 +1774,7 @@ static int q6v5_probe(struct platform_device *pdev)
 	qproc->need_mem_protection = desc->need_mem_protection;
 	qproc->has_mba_logs = desc->has_mba_logs;
 
-	ret = qcom_q6v5_init(&qproc->q6v5, pdev, rproc, MPSS_CRASH_REASON_SMEM,
+	ret = qcom_q6v5_init(&qproc->q6v5, pdev, rproc, MPSS_CRASH_REASON_SMEM, "modem",
 			     qcom_msa_handover);
 	if (ret)
 		goto detach_proxy_pds;
@@ -1822,8 +1804,6 @@ static int q6v5_probe(struct platform_device *pdev)
 	qcom_remove_glink_subdev(rproc, &qproc->glink_subdev);
 detach_proxy_pds:
 	q6v5_pds_detach(qproc, qproc->proxy_pds, qproc->proxy_pd_count);
-detach_active_pds:
-	q6v5_pds_detach(qproc, qproc->active_pds, qproc->active_pd_count);
 free_rproc:
 	rproc_free(rproc);
 
@@ -1837,13 +1817,13 @@ static int q6v5_remove(struct platform_device *pdev)
 
 	rproc_del(rproc);
 
+	qcom_q6v5_deinit(&qproc->q6v5);
 	qcom_remove_sysmon_subdev(qproc->sysmon);
 	qcom_remove_ssr_subdev(rproc, &qproc->ssr_subdev);
 	qcom_remove_smd_subdev(rproc, &qproc->smd_subdev);
 	qcom_remove_glink_subdev(rproc, &qproc->glink_subdev);
 
 	q6v5_pds_detach(qproc, qproc->proxy_pds, qproc->proxy_pd_count);
-	q6v5_pds_detach(qproc, qproc->active_pds, qproc->active_pd_count);
 
 	rproc_free(rproc);
 
@@ -1867,10 +1847,6 @@ static const struct rproc_hexagon_res sc7180_mss = {
 		"nav",
 		NULL
 	},
-	.active_pd_names = (char*[]){
-		"load_state",
-		NULL
-	},
 	.proxy_pd_names = (char*[]){
 		"cx",
 		"mx",
@@ -1903,10 +1879,6 @@ static const struct rproc_hexagon_res sdm845_mss = {
 			"mnoc_axi",
 			NULL
 	},
-	.active_pd_names = (char*[]){
-			"load_state",
-			NULL
-	},
 	.proxy_pd_names = (char*[]){
 			"cx",
 			"mx",
diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index 401b1ec90785..7036e6e9eff4 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -37,9 +37,9 @@ struct adsp_data {
 	bool has_aggre2_clk;
 	bool auto_boot;
 
-	char **active_pd_names;
 	char **proxy_pd_names;
 
+	const char *load_state;
 	const char *ssr_name;
 	const char *sysmon_name;
 	int ssctl_id;
@@ -57,10 +57,8 @@ struct qcom_adsp {
 	struct regulator *cx_supply;
 	struct regulator *px_supply;
 
-	struct device *active_pds[1];
 	struct device *proxy_pds[3];
 
-	int active_pd_count;
 	int proxy_pd_count;
 
 	int pas_id;
@@ -149,15 +147,13 @@ static int adsp_start(struct rproc *rproc)
 	struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv;
 	int ret;
 
-	qcom_q6v5_prepare(&adsp->q6v5);
-
-	ret = adsp_pds_enable(adsp, adsp->active_pds, adsp->active_pd_count);
-	if (ret < 0)
-		goto disable_irqs;
+	ret = qcom_q6v5_prepare(&adsp->q6v5);
+	if (ret)
+		return ret;
 
 	ret = adsp_pds_enable(adsp, adsp->proxy_pds, adsp->proxy_pd_count);
 	if (ret < 0)
-		goto disable_active_pds;
+		goto disable_irqs;
 
 	ret = clk_prepare_enable(adsp->xo);
 	if (ret)
@@ -201,8 +197,6 @@ static int adsp_start(struct rproc *rproc)
 	clk_disable_unprepare(adsp->xo);
 disable_proxy_pds:
 	adsp_pds_disable(adsp, adsp->proxy_pds, adsp->proxy_pd_count);
-disable_active_pds:
-	adsp_pds_disable(adsp, adsp->active_pds, adsp->active_pd_count);
 disable_irqs:
 	qcom_q6v5_unprepare(&adsp->q6v5);
 
@@ -234,7 +228,6 @@ static int adsp_stop(struct rproc *rproc)
 	if (ret)
 		dev_err(adsp->dev, "failed to shutdown: %d\n", ret);
 
-	adsp_pds_disable(adsp, adsp->active_pds, adsp->active_pd_count);
 	handover = qcom_q6v5_unprepare(&adsp->q6v5);
 	if (handover)
 		qcom_pas_handover(&adsp->q6v5);
@@ -456,19 +449,13 @@ static int adsp_probe(struct platform_device *pdev)
 	if (ret)
 		goto free_rproc;
 
-	ret = adsp_pds_attach(&pdev->dev, adsp->active_pds,
-			      desc->active_pd_names);
-	if (ret < 0)
-		goto free_rproc;
-	adsp->active_pd_count = ret;
-
 	ret = adsp_pds_attach(&pdev->dev, adsp->proxy_pds,
 			      desc->proxy_pd_names);
 	if (ret < 0)
-		goto detach_active_pds;
+		goto free_rproc;
 	adsp->proxy_pd_count = ret;
 
-	ret = qcom_q6v5_init(&adsp->q6v5, pdev, rproc, desc->crash_reason_smem,
+	ret = qcom_q6v5_init(&adsp->q6v5, pdev, rproc, desc->crash_reason_smem, desc->load_state,
 			     qcom_pas_handover);
 	if (ret)
 		goto detach_proxy_pds;
@@ -492,8 +479,6 @@ static int adsp_probe(struct platform_device *pdev)
 
 detach_proxy_pds:
 	adsp_pds_detach(adsp, adsp->proxy_pds, adsp->proxy_pd_count);
-detach_active_pds:
-	adsp_pds_detach(adsp, adsp->active_pds, adsp->active_pd_count);
 free_rproc:
 	rproc_free(rproc);
 
@@ -506,6 +491,7 @@ static int adsp_remove(struct platform_device *pdev)
 
 	rproc_del(adsp->rproc);
 
+	qcom_q6v5_deinit(&adsp->q6v5);
 	qcom_remove_glink_subdev(adsp->rproc, &adsp->glink_subdev);
 	qcom_remove_sysmon_subdev(adsp->sysmon);
 	qcom_remove_smd_subdev(adsp->rproc, &adsp->smd_subdev);
@@ -532,14 +518,11 @@ static const struct adsp_data sm8150_adsp_resource = {
 		.pas_id = 1,
 		.has_aggre2_clk = false,
 		.auto_boot = true,
-		.active_pd_names = (char*[]){
-			"load_state",
-			NULL
-		},
 		.proxy_pd_names = (char*[]){
 			"cx",
 			NULL
 		},
+		.load_state = "adsp",
 		.ssr_name = "lpass",
 		.sysmon_name = "adsp",
 		.ssctl_id = 0x14,
@@ -551,15 +534,12 @@ static const struct adsp_data sm8250_adsp_resource = {
 	.pas_id = 1,
 	.has_aggre2_clk = false,
 	.auto_boot = true,
-	.active_pd_names = (char*[]){
-		"load_state",
-		NULL
-	},
 	.proxy_pd_names = (char*[]){
 		"lcx",
 		"lmx",
 		NULL
 	},
+	.load_state = "adsp",
 	.ssr_name = "lpass",
 	.sysmon_name = "adsp",
 	.ssctl_id = 0x14,
@@ -571,15 +551,12 @@ static const struct adsp_data sm8350_adsp_resource = {
 	.pas_id = 1,
 	.has_aggre2_clk = false,
 	.auto_boot = true,
-	.active_pd_names = (char*[]){
-		"load_state",
-		NULL
-	},
 	.proxy_pd_names = (char*[]){
 		"lcx",
 		"lmx",
 		NULL
 	},
+	.load_state = "adsp",
 	.ssr_name = "lpass",
 	.sysmon_name = "adsp",
 	.ssctl_id = 0x14,
@@ -617,14 +594,11 @@ static const struct adsp_data sm8150_cdsp_resource = {
 	.pas_id = 18,
 	.has_aggre2_clk = false,
 	.auto_boot = true,
-	.active_pd_names = (char*[]){
-		"load_state",
-		NULL
-	},
 	.proxy_pd_names = (char*[]){
 		"cx",
 		NULL
 	},
+	.load_state = "cdsp",
 	.ssr_name = "cdsp",
 	.sysmon_name = "cdsp",
 	.ssctl_id = 0x17,
@@ -636,14 +610,11 @@ static const struct adsp_data sm8250_cdsp_resource = {
 	.pas_id = 18,
 	.has_aggre2_clk = false,
 	.auto_boot = true,
-	.active_pd_names = (char*[]){
-		"load_state",
-		NULL
-	},
 	.proxy_pd_names = (char*[]){
 		"cx",
 		NULL
 	},
+	.load_state = "cdsp",
 	.ssr_name = "cdsp",
 	.sysmon_name = "cdsp",
 	.ssctl_id = 0x17,
@@ -655,14 +626,11 @@ static const struct adsp_data sm8350_cdsp_resource = {
 	.pas_id = 18,
 	.has_aggre2_clk = false,
 	.auto_boot = true,
-	.active_pd_names = (char*[]){
-		"load_state",
-		NULL
-	},
 	.proxy_pd_names = (char*[]){
 		"cx",
 		NULL
 	},
+	.load_state = "cdsp",
 	.ssr_name = "cdsp",
 	.sysmon_name = "cdsp",
 	.ssctl_id = 0x17,
@@ -675,15 +643,12 @@ static const struct adsp_data mpss_resource_init = {
 	.minidump_id = 3,
 	.has_aggre2_clk = false,
 	.auto_boot = false,
-	.active_pd_names = (char*[]){
-		"load_state",
-		NULL
-	},
 	.proxy_pd_names = (char*[]){
 		"cx",
 		"mss",
 		NULL
 	},
+	.load_state = "modem",
 	.ssr_name = "mpss",
 	.sysmon_name = "modem",
 	.ssctl_id = 0x12,
@@ -695,14 +660,11 @@ static const struct adsp_data sc8180x_mpss_resource = {
 	.pas_id = 4,
 	.has_aggre2_clk = false,
 	.auto_boot = false,
-	.active_pd_names = (char*[]){
-		"load_state",
-		NULL
-	},
 	.proxy_pd_names = (char*[]){
 		"cx",
 		NULL
 	},
+	.load_state = "modem",
 	.ssr_name = "mpss",
 	.sysmon_name = "modem",
 	.ssctl_id = 0x12,
@@ -725,15 +687,12 @@ static const struct adsp_data sm8150_slpi_resource = {
 		.pas_id = 12,
 		.has_aggre2_clk = false,
 		.auto_boot = true,
-		.active_pd_names = (char*[]){
-			"load_state",
-			NULL
-		},
 		.proxy_pd_names = (char*[]){
 			"lcx",
 			"lmx",
 			NULL
 		},
+		.load_state = "slpi",
 		.ssr_name = "dsps",
 		.sysmon_name = "slpi",
 		.ssctl_id = 0x16,
@@ -745,15 +704,12 @@ static const struct adsp_data sm8250_slpi_resource = {
 	.pas_id = 12,
 	.has_aggre2_clk = false,
 	.auto_boot = true,
-	.active_pd_names = (char*[]){
-		"load_state",
-		NULL
-	},
 	.proxy_pd_names = (char*[]){
 		"lcx",
 		"lmx",
 		NULL
 	},
+	.load_state = "slpi",
 	.ssr_name = "dsps",
 	.sysmon_name = "slpi",
 	.ssctl_id = 0x16,
@@ -765,15 +721,12 @@ static const struct adsp_data sm8350_slpi_resource = {
 	.pas_id = 12,
 	.has_aggre2_clk = false,
 	.auto_boot = true,
-	.active_pd_names = (char*[]){
-		"load_state",
-		NULL
-	},
 	.proxy_pd_names = (char*[]){
 		"lcx",
 		"lmx",
 		NULL
 	},
+	.load_state = "slpi",
 	.ssr_name = "dsps",
 	.sysmon_name = "slpi",
 	.ssctl_id = 0x16,
diff --git a/drivers/remoteproc/qcom_q6v5_wcss.c b/drivers/remoteproc/qcom_q6v5_wcss.c
index 20d50ec7eff1..0689288a2425 100644
--- a/drivers/remoteproc/qcom_q6v5_wcss.c
+++ b/drivers/remoteproc/qcom_q6v5_wcss.c
@@ -1044,8 +1044,7 @@ static int q6v5_wcss_probe(struct platform_device *pdev)
 	if (ret)
 		goto free_rproc;
 
-	ret = qcom_q6v5_init(&wcss->q6v5, pdev, rproc, desc->crash_reason_smem,
-			     NULL);
+	ret = qcom_q6v5_init(&wcss->q6v5, pdev, rproc, desc->crash_reason_smem, NULL, NULL);
 	if (ret)
 		goto free_rproc;
 
@@ -1075,6 +1074,7 @@ static int q6v5_wcss_remove(struct platform_device *pdev)
 {
 	struct rproc *rproc = platform_get_drvdata(pdev);
 
+	qcom_q6v5_deinit(&qproc->q6v5);
 	rproc_del(rproc);
 	rproc_free(rproc);
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 20+ messages in thread

* [PATCH v5 05/13] arm64: dts: qcom: sc7180: Use QMP property to control load state
  2021-08-19  3:02 [PATCH v5 00/13] Use qmp_send to update co-processor load state Sibi Sankar
                   ` (3 preceding siblings ...)
  2021-08-19  3:02 ` [PATCH v5 04/13] remoteproc: qcom: q6v5: Use qmp_send to update co-processor load state Sibi Sankar
@ 2021-08-19  3:02 ` Sibi Sankar
  2021-08-19  3:02 ` [PATCH v5 06/13] arm64: dts: qcom: sc7280: " Sibi Sankar
                   ` (7 subsequent siblings)
  12 siblings, 0 replies; 20+ messages in thread
From: Sibi Sankar @ 2021-08-19  3:02 UTC (permalink / raw)
  To: mka, swboyd, bjorn.andersson, robh+dt
  Cc: ulf.hansson, rjw, agross, ohad, mathieu.poirier, linux-arm-msm,
	linux-remoteproc, devicetree, linux-kernel, dianders, rishabhb,
	sidgup, Sibi Sankar

Use the Qualcomm Mailbox Protocol (QMP) property to control the load
state resources on SC7180 SoCs and drop deprecated power-domains exposed
by AOSS QMP node.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 4721c155ec11..e3f45f4cae2e 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -15,7 +15,6 @@
 #include <dt-bindings/interconnect/qcom,sc7180.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
-#include <dt-bindings/power/qcom-aoss-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,sdm845-aoss.h>
 #include <dt-bindings/reset/qcom,sdm845-pdc.h>
@@ -1898,14 +1897,15 @@
 			clock-names = "iface", "bus", "nav", "snoc_axi",
 				      "mnoc_axi", "xo";
 
-			power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>,
-					<&rpmhpd SC7180_CX>,
+			power-domains = <&rpmhpd SC7180_CX>,
 					<&rpmhpd SC7180_MX>,
 					<&rpmhpd SC7180_MSS>;
-			power-domain-names = "load_state", "cx", "mx", "mss";
+			power-domain-names = "cx", "mx", "mss";
 
 			memory-region = <&mpss_mem>;
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&modem_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
 
@@ -3200,7 +3200,6 @@
 			mboxes = <&apss_shared 0>;
 
 			#clock-cells = <0>;
-			#power-domain-cells = <1>;
 		};
 
 		spmi_bus: spmi@c440000 {
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 20+ messages in thread

* [PATCH v5 06/13] arm64: dts: qcom: sc7280: Use QMP property to control load state
  2021-08-19  3:02 [PATCH v5 00/13] Use qmp_send to update co-processor load state Sibi Sankar
                   ` (4 preceding siblings ...)
  2021-08-19  3:02 ` [PATCH v5 05/13] arm64: dts: qcom: sc7180: Use QMP property to control " Sibi Sankar
@ 2021-08-19  3:02 ` Sibi Sankar
  2021-08-19  3:02 ` [PATCH v5 07/13] arm64: dts: qcom: sdm845: " Sibi Sankar
                   ` (6 subsequent siblings)
  12 siblings, 0 replies; 20+ messages in thread
From: Sibi Sankar @ 2021-08-19  3:02 UTC (permalink / raw)
  To: mka, swboyd, bjorn.andersson, robh+dt
  Cc: ulf.hansson, rjw, agross, ohad, mathieu.poirier, linux-arm-msm,
	linux-remoteproc, devicetree, linux-kernel, dianders, rishabhb,
	sidgup, Sibi Sankar

Use the Qualcomm Mailbox Protocol (QMP) property to control the load
state resources on SC7280 SoCs and drop deprecated power-domains exposed
by AOSS QMP node.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 53a21d086178..5e4f4f3b738a 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -10,7 +10,6 @@
 #include <dt-bindings/interconnect/qcom,sc7280.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
-#include <dt-bindings/power/qcom-aoss-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,sdm845-aoss.h>
 #include <dt-bindings/reset/qcom,sdm845-pdc.h>
@@ -1481,7 +1480,6 @@
 					IPCC_MPROC_SIGNAL_GLINK_QMP>;
 
 			#clock-cells = <0>;
-			#power-domain-cells = <1>;
 		};
 
 		spmi_bus: spmi@c440000 {
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 20+ messages in thread

* [PATCH v5 07/13] arm64: dts: qcom: sdm845: Use QMP property to control load state
  2021-08-19  3:02 [PATCH v5 00/13] Use qmp_send to update co-processor load state Sibi Sankar
                   ` (5 preceding siblings ...)
  2021-08-19  3:02 ` [PATCH v5 06/13] arm64: dts: qcom: sc7280: " Sibi Sankar
@ 2021-08-19  3:02 ` Sibi Sankar
  2021-08-19  3:02 ` [PATCH v5 08/13] arm64: dts: qcom: sm8150: " Sibi Sankar
                   ` (5 subsequent siblings)
  12 siblings, 0 replies; 20+ messages in thread
From: Sibi Sankar @ 2021-08-19  3:02 UTC (permalink / raw)
  To: mka, swboyd, bjorn.andersson, robh+dt
  Cc: ulf.hansson, rjw, agross, ohad, mathieu.poirier, linux-arm-msm,
	linux-remoteproc, devicetree, linux-kernel, dianders, rishabhb,
	sidgup, Sibi Sankar

Use the Qualcomm Mailbox Protocol (QMP) property to control the load
state resources on SDM845 SoCs and drop deprecated power-domains exposed
by AOSS QMP node.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 6d7172e6f4c3..b96e15f088a9 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2979,6 +2979,8 @@
 			clock-names = "iface", "bus", "mem", "gpll0_mss",
 				      "snoc_axi", "mnoc_axi", "prng", "xo";
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&modem_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
 
@@ -2988,11 +2990,10 @@
 
 			qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
 
-			power-domains = <&aoss_qmp 2>,
-					<&rpmhpd SDM845_CX>,
+			power-domains = <&rpmhpd SDM845_CX>,
 					<&rpmhpd SDM845_MX>,
 					<&rpmhpd SDM845_MSS>;
-			power-domain-names = "load_state", "cx", "mx", "mss";
+			power-domain-names = "cx", "mx", "mss";
 
 			mba {
 				memory-region = <&mba_region>;
@@ -4583,7 +4584,6 @@
 			mboxes = <&apss_shared 0>;
 
 			#clock-cells = <0>;
-			#power-domain-cells = <1>;
 
 			cx_cdev: cx {
 				#cooling-cells = <2>;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 20+ messages in thread

* [PATCH v5 08/13] arm64: dts: qcom: sm8150: Use QMP property to control load state
  2021-08-19  3:02 [PATCH v5 00/13] Use qmp_send to update co-processor load state Sibi Sankar
                   ` (6 preceding siblings ...)
  2021-08-19  3:02 ` [PATCH v5 07/13] arm64: dts: qcom: sdm845: " Sibi Sankar
@ 2021-08-19  3:02 ` Sibi Sankar
  2021-08-19  3:02 ` [PATCH v5 09/13] arm64: dts: qcom: sm8250: " Sibi Sankar
                   ` (4 subsequent siblings)
  12 siblings, 0 replies; 20+ messages in thread
From: Sibi Sankar @ 2021-08-19  3:02 UTC (permalink / raw)
  To: mka, swboyd, bjorn.andersson, robh+dt
  Cc: ulf.hansson, rjw, agross, ohad, mathieu.poirier, linux-arm-msm,
	linux-remoteproc, devicetree, linux-kernel, dianders, rishabhb,
	sidgup, Sibi Sankar

Use the Qualcomm Mailbox Protocol (QMP) property to control the load
state resources on SM8150 SoCs and drop deprecated power-domains exposed
by AOSS QMP node.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
 arch/arm64/boot/dts/qcom/sm8150.dtsi | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index ef0232c2cf45..8a035693b7a3 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -6,7 +6,6 @@
 
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/power/qcom-aoss-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
@@ -1729,13 +1728,14 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&aoss_qmp AOSS_QMP_LS_SLPI>,
-					<&rpmhpd 3>,
+			power-domains = <&rpmhpd 3>,
 					<&rpmhpd 2>;
-			power-domain-names = "load_state", "lcx", "lmx";
+			power-domain-names = "lcx", "lmx";
 
 			memory-region = <&slpi_mem>;
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&slpi_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
 
@@ -2319,13 +2319,14 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>,
-					<&rpmhpd 7>,
+			power-domains = <&rpmhpd 7>,
 					<&rpmhpd 0>;
-			power-domain-names = "load_state", "cx", "mss";
+			power-domain-names = "cx", "mss";
 
 			memory-region = <&mpss_mem>;
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&modem_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
 
@@ -2945,12 +2946,12 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&aoss_qmp AOSS_QMP_LS_CDSP>,
-					<&rpmhpd 7>;
-			power-domain-names = "load_state", "cx";
+			power-domains = <&rpmhpd 7>;
 
 			memory-region = <&cdsp_mem>;
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&cdsp_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
 
@@ -3174,7 +3175,6 @@
 			mboxes = <&apss_shared 0>;
 
 			#clock-cells = <0>;
-			#power-domain-cells = <1>;
 		};
 
 		tsens0: thermal-sensor@c263000 {
@@ -3321,12 +3321,12 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&aoss_qmp AOSS_QMP_LS_LPASS>,
-					<&rpmhpd 7>;
-			power-domain-names = "load_state", "cx";
+			power-domains = <&rpmhpd 7>;
 
 			memory-region = <&adsp_mem>;
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&adsp_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 20+ messages in thread

* [PATCH v5 09/13] arm64: dts: qcom: sm8250: Use QMP property to control load state
  2021-08-19  3:02 [PATCH v5 00/13] Use qmp_send to update co-processor load state Sibi Sankar
                   ` (7 preceding siblings ...)
  2021-08-19  3:02 ` [PATCH v5 08/13] arm64: dts: qcom: sm8150: " Sibi Sankar
@ 2021-08-19  3:02 ` Sibi Sankar
  2021-08-19  3:02 ` [PATCH v5 10/13] arm64: dts: qcom: sm8350: " Sibi Sankar
                   ` (3 subsequent siblings)
  12 siblings, 0 replies; 20+ messages in thread
From: Sibi Sankar @ 2021-08-19  3:02 UTC (permalink / raw)
  To: mka, swboyd, bjorn.andersson, robh+dt
  Cc: ulf.hansson, rjw, agross, ohad, mathieu.poirier, linux-arm-msm,
	linux-remoteproc, devicetree, linux-kernel, dianders, rishabhb,
	sidgup, Sibi Sankar

Use the Qualcomm Mailbox Protocol (QMP) property to control the load
state resources on SM8250 SoCs and drop deprecated power-domains exposed
by AOSS QMP node.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 8c15d9fed08f..2796b27f7c04 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -13,7 +13,6 @@
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sm8250.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
-#include <dt-bindings/power/qcom-aoss-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,apr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
@@ -2088,13 +2087,14 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&aoss_qmp AOSS_QMP_LS_SLPI>,
-					<&rpmhpd SM8250_LCX>,
+			power-domains = <&rpmhpd SM8250_LCX>,
 					<&rpmhpd SM8250_LMX>;
-			power-domain-names = "load_state", "lcx", "lmx";
+			power-domain-names = "lcx", "lmx";
 
 			memory-region = <&slpi_mem>;
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&smp2p_slpi_out 0>;
 			qcom,smem-state-names = "stop";
 
@@ -2154,12 +2154,12 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&aoss_qmp AOSS_QMP_LS_CDSP>,
-					<&rpmhpd SM8250_CX>;
-			power-domain-names = "load_state", "cx";
+			power-domains = <&rpmhpd SM8250_CX>;
 
 			memory-region = <&cdsp_mem>;
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&smp2p_cdsp_out 0>;
 			qcom,smem-state-names = "stop";
 
@@ -2907,7 +2907,6 @@
 					IPCC_MPROC_SIGNAL_GLINK_QMP>;
 
 			#clock-cells = <0>;
-			#power-domain-cells = <1>;
 		};
 
 		spmi_bus: spmi@c440000 {
@@ -3824,13 +3823,14 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&aoss_qmp AOSS_QMP_LS_LPASS>,
-					<&rpmhpd SM8250_LCX>,
+			power-domains = <&rpmhpd SM8250_LCX>,
 					<&rpmhpd SM8250_LMX>;
-			power-domain-names = "load_state", "lcx", "lmx";
+			power-domain-names = "lcx", "lmx";
 
 			memory-region = <&adsp_mem>;
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&smp2p_adsp_out 0>;
 			qcom,smem-state-names = "stop";
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 20+ messages in thread

* [PATCH v5 10/13] arm64: dts: qcom: sm8350: Use QMP property to control load state
  2021-08-19  3:02 [PATCH v5 00/13] Use qmp_send to update co-processor load state Sibi Sankar
                   ` (8 preceding siblings ...)
  2021-08-19  3:02 ` [PATCH v5 09/13] arm64: dts: qcom: sm8250: " Sibi Sankar
@ 2021-08-19  3:02 ` Sibi Sankar
  2021-08-19  3:02 ` [PATCH v5 11/13] soc: qcom: aoss: Drop power domain support Sibi Sankar
                   ` (2 subsequent siblings)
  12 siblings, 0 replies; 20+ messages in thread
From: Sibi Sankar @ 2021-08-19  3:02 UTC (permalink / raw)
  To: mka, swboyd, bjorn.andersson, robh+dt
  Cc: ulf.hansson, rjw, agross, ohad, mathieu.poirier, linux-arm-msm,
	linux-remoteproc, devicetree, linux-kernel, dianders, rishabhb,
	sidgup, Sibi Sankar

Use the Qualcomm Mailbox Protocol (QMP) property to control the load
state resources on SM8350 SoCs and drop deprecated power-domains exposed
by AOSS QMP node.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 30 ++++++++++++++++--------------
 1 file changed, 16 insertions(+), 14 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index e91cd8a5e535..6c83cd52a279 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -8,7 +8,6 @@
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/interconnect/qcom,sm8350.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
-#include <dt-bindings/power/qcom-aoss-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/thermal/thermal.h>
@@ -726,15 +725,16 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>,
-					<&rpmhpd 0>,
+			power-domains = <&rpmhpd 0>,
 					<&rpmhpd 12>;
-			power-domain-names = "load_state", "cx", "mss";
+			power-domain-names = "cx", "mss";
 
 			interconnects = <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>;
 
 			memory-region = <&pil_modem_mem>;
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&smp2p_modem_out 0>;
 			qcom,smem-state-names = "stop";
 
@@ -794,7 +794,6 @@
 			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
 
 			#clock-cells = <0>;
-			#power-domain-cells = <1>;
 		};
 
 		spmi_bus: spmi@c440000 {
@@ -1107,13 +1106,14 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&aoss_qmp AOSS_QMP_LS_SLPI>,
-					<&rpmhpd 4>,
+			power-domains = <&rpmhpd 4>,
 					<&rpmhpd 5>;
-			power-domain-names = "load_state", "lcx", "lmx";
+			power-domain-names = "lcx", "lmx";
 
 			memory-region = <&pil_slpi_mem>;
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&smp2p_slpi_out 0>;
 			qcom,smem-state-names = "stop";
 
@@ -1147,15 +1147,16 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&aoss_qmp AOSS_QMP_LS_CDSP>,
-					<&rpmhpd 0>,
+			power-domains = <&rpmhpd 0>,
 					<&rpmhpd 10>;
-			power-domain-names = "load_state", "cx", "mxc";
+			power-domain-names = "cx", "mxc";
 
 			interconnects = <&compute_noc MASTER_CDSP_PROC &mc_virt SLAVE_EBI1>;
 
 			memory-region = <&pil_cdsp_mem>;
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&smp2p_cdsp_out 0>;
 			qcom,smem-state-names = "stop";
 
@@ -1381,13 +1382,14 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&aoss_qmp AOSS_QMP_LS_LPASS>,
-					<&rpmhpd 4>,
+			power-domains = <&rpmhpd 4>,
 					<&rpmhpd 5>;
-			power-domain-names = "load_state", "lcx", "lmx";
+			power-domain-names = "lcx", "lmx";
 
 			memory-region = <&pil_adsp_mem>;
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&smp2p_adsp_out 0>;
 			qcom,smem-state-names = "stop";
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 20+ messages in thread

* [PATCH v5 11/13] soc: qcom: aoss: Drop power domain support
  2021-08-19  3:02 [PATCH v5 00/13] Use qmp_send to update co-processor load state Sibi Sankar
                   ` (9 preceding siblings ...)
  2021-08-19  3:02 ` [PATCH v5 10/13] arm64: dts: qcom: sm8350: " Sibi Sankar
@ 2021-08-19  3:02 ` Sibi Sankar
  2021-08-19  3:02 ` [PATCH v5 12/13] dt-bindings: msm/dp: Remove aoss-qmp header Sibi Sankar
  2021-08-19  3:02 ` [PATCH v5 13/13] dt-bindings: soc: qcom: aoss: Delete unused power-domain definitions Sibi Sankar
  12 siblings, 0 replies; 20+ messages in thread
From: Sibi Sankar @ 2021-08-19  3:02 UTC (permalink / raw)
  To: mka, swboyd, bjorn.andersson, robh+dt
  Cc: ulf.hansson, rjw, agross, ohad, mathieu.poirier, linux-arm-msm,
	linux-remoteproc, devicetree, linux-kernel, dianders, rishabhb,
	sidgup, Sibi Sankar

Strip out the load state power-domain support from the driver since the
low power mode signalling for the co-processors is now accessible through
the direct qmp message send interface.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
 drivers/soc/qcom/qcom_aoss.c | 107 -------------------------------------------
 1 file changed, 107 deletions(-)

diff --git a/drivers/soc/qcom/qcom_aoss.c b/drivers/soc/qcom/qcom_aoss.c
index 99ec075f0eb9..58fb9ee68f15 100644
--- a/drivers/soc/qcom/qcom_aoss.c
+++ b/drivers/soc/qcom/qcom_aoss.c
@@ -2,7 +2,6 @@
 /*
  * Copyright (c) 2019, Linaro Ltd
  */
-#include <dt-bindings/power/qcom-aoss-qmp.h>
 #include <linux/clk-provider.h>
 #include <linux/debugfs.h>
 #include <linux/interrupt.h>
@@ -11,7 +10,6 @@
 #include <linux/module.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
-#include <linux/pm_domain.h>
 #include <linux/thermal.h>
 #include <linux/slab.h>
 #include <linux/soc/qcom/qcom_aoss.h>
@@ -67,7 +65,6 @@ struct qmp_cooling_device {
  * @event: wait_queue for synchronization with the IRQ
  * @tx_lock: provides synchronization between multiple callers of qmp_send()
  * @qdss_clk: QDSS clock hw struct
- * @pd_data: genpd data
  * @cooling_devs: thermal cooling devices
  */
 struct qmp {
@@ -85,20 +82,12 @@ struct qmp {
 	struct mutex tx_lock;
 
 	struct clk_hw qdss_clk;
-	struct genpd_onecell_data pd_data;
 	struct qmp_cooling_device *cooling_devs;
 #if IS_ENABLED(CONFIG_DEBUG_FS)
 	struct dentry *debugfs_file;
 #endif /* CONFIG_DEBUG_FS */
 };
 
-struct qmp_pd {
-	struct qmp *qmp;
-	struct generic_pm_domain pd;
-};
-
-#define to_qmp_pd_resource(res) container_of(res, struct qmp_pd, pd)
-
 static void qmp_kick(struct qmp *qmp)
 {
 	mbox_send_message(qmp->mbox_chan, NULL);
@@ -324,95 +313,6 @@ static void qmp_qdss_clk_remove(struct qmp *qmp)
 	clk_hw_unregister(&qmp->qdss_clk);
 }
 
-static int qmp_pd_power_toggle(struct qmp_pd *res, bool enable)
-{
-	char buf[QMP_MSG_LEN] = {};
-
-	snprintf(buf, sizeof(buf),
-		 "{class: image, res: load_state, name: %s, val: %s}",
-		 res->pd.name, enable ? "on" : "off");
-	return qmp_send(res->qmp, buf, sizeof(buf));
-}
-
-static int qmp_pd_power_on(struct generic_pm_domain *domain)
-{
-	return qmp_pd_power_toggle(to_qmp_pd_resource(domain), true);
-}
-
-static int qmp_pd_power_off(struct generic_pm_domain *domain)
-{
-	return qmp_pd_power_toggle(to_qmp_pd_resource(domain), false);
-}
-
-static const char * const sdm845_resources[] = {
-	[AOSS_QMP_LS_CDSP] = "cdsp",
-	[AOSS_QMP_LS_LPASS] = "adsp",
-	[AOSS_QMP_LS_MODEM] = "modem",
-	[AOSS_QMP_LS_SLPI] = "slpi",
-	[AOSS_QMP_LS_SPSS] = "spss",
-	[AOSS_QMP_LS_VENUS] = "venus",
-};
-
-static int qmp_pd_add(struct qmp *qmp)
-{
-	struct genpd_onecell_data *data = &qmp->pd_data;
-	struct device *dev = qmp->dev;
-	struct qmp_pd *res;
-	size_t num = ARRAY_SIZE(sdm845_resources);
-	int ret;
-	int i;
-
-	res = devm_kcalloc(dev, num, sizeof(*res), GFP_KERNEL);
-	if (!res)
-		return -ENOMEM;
-
-	data->domains = devm_kcalloc(dev, num, sizeof(*data->domains),
-				     GFP_KERNEL);
-	if (!data->domains)
-		return -ENOMEM;
-
-	for (i = 0; i < num; i++) {
-		res[i].qmp = qmp;
-		res[i].pd.name = sdm845_resources[i];
-		res[i].pd.power_on = qmp_pd_power_on;
-		res[i].pd.power_off = qmp_pd_power_off;
-
-		ret = pm_genpd_init(&res[i].pd, NULL, true);
-		if (ret < 0) {
-			dev_err(dev, "failed to init genpd\n");
-			goto unroll_genpds;
-		}
-
-		data->domains[i] = &res[i].pd;
-	}
-
-	data->num_domains = i;
-
-	ret = of_genpd_add_provider_onecell(dev->of_node, data);
-	if (ret < 0)
-		goto unroll_genpds;
-
-	return 0;
-
-unroll_genpds:
-	for (i--; i >= 0; i--)
-		pm_genpd_remove(data->domains[i]);
-
-	return ret;
-}
-
-static void qmp_pd_remove(struct qmp *qmp)
-{
-	struct genpd_onecell_data *data = &qmp->pd_data;
-	struct device *dev = qmp->dev;
-	int i;
-
-	of_genpd_del_provider(dev->of_node);
-
-	for (i = 0; i < data->num_domains; i++)
-		pm_genpd_remove(data->domains[i]);
-}
-
 static int qmp_cdev_get_max_state(struct thermal_cooling_device *cdev,
 				  unsigned long *state)
 {
@@ -642,10 +542,6 @@ static int qmp_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_close_qmp;
 
-	ret = qmp_pd_add(qmp);
-	if (ret)
-		goto err_remove_qdss_clk;
-
 	ret = qmp_cooling_devices_register(qmp);
 	if (ret)
 		dev_err(&pdev->dev, "failed to register aoss cooling devices\n");
@@ -659,8 +555,6 @@ static int qmp_probe(struct platform_device *pdev)
 
 	return 0;
 
-err_remove_qdss_clk:
-	qmp_qdss_clk_remove(qmp);
 err_close_qmp:
 	qmp_close(qmp);
 err_free_mbox:
@@ -678,7 +572,6 @@ static int qmp_remove(struct platform_device *pdev)
 #endif /* CONFIG_DEBUG_FS */
 
 	qmp_qdss_clk_remove(qmp);
-	qmp_pd_remove(qmp);
 	qmp_cooling_devices_remove(qmp);
 
 	qmp_close(qmp);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 20+ messages in thread

* [PATCH v5 12/13] dt-bindings: msm/dp: Remove aoss-qmp header
  2021-08-19  3:02 [PATCH v5 00/13] Use qmp_send to update co-processor load state Sibi Sankar
                   ` (10 preceding siblings ...)
  2021-08-19  3:02 ` [PATCH v5 11/13] soc: qcom: aoss: Drop power domain support Sibi Sankar
@ 2021-08-19  3:02 ` Sibi Sankar
  2021-08-19  3:02 ` [PATCH v5 13/13] dt-bindings: soc: qcom: aoss: Delete unused power-domain definitions Sibi Sankar
  12 siblings, 0 replies; 20+ messages in thread
From: Sibi Sankar @ 2021-08-19  3:02 UTC (permalink / raw)
  To: mka, swboyd, bjorn.andersson, robh+dt
  Cc: ulf.hansson, rjw, agross, ohad, mathieu.poirier, linux-arm-msm,
	linux-remoteproc, devicetree, linux-kernel, dianders, rishabhb,
	sidgup, Sibi Sankar

Remove the unused aoss-qmp header from the list of includes.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
 Documentation/devicetree/bindings/display/msm/dp-controller.yaml | 1 -
 1 file changed, 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
index 64d8d9e5e47a..d89b3c510c27 100644
--- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
@@ -95,7 +95,6 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
-    #include <dt-bindings/power/qcom-aoss-qmp.h>
     #include <dt-bindings/power/qcom-rpmpd.h>
 
     displayport-controller@ae90000 {
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 20+ messages in thread

* [PATCH v5 13/13] dt-bindings: soc: qcom: aoss: Delete unused power-domain definitions
  2021-08-19  3:02 [PATCH v5 00/13] Use qmp_send to update co-processor load state Sibi Sankar
                   ` (11 preceding siblings ...)
  2021-08-19  3:02 ` [PATCH v5 12/13] dt-bindings: msm/dp: Remove aoss-qmp header Sibi Sankar
@ 2021-08-19  3:02 ` Sibi Sankar
  12 siblings, 0 replies; 20+ messages in thread
From: Sibi Sankar @ 2021-08-19  3:02 UTC (permalink / raw)
  To: mka, swboyd, bjorn.andersson, robh+dt
  Cc: ulf.hansson, rjw, agross, ohad, mathieu.poirier, linux-arm-msm,
	linux-remoteproc, devicetree, linux-kernel, dianders, rishabhb,
	sidgup, Sibi Sankar

Delete unused power-domain definitions exposed by AOSS QMP.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
---
 include/dt-bindings/power/qcom-aoss-qmp.h | 14 --------------
 1 file changed, 14 deletions(-)
 delete mode 100644 include/dt-bindings/power/qcom-aoss-qmp.h

diff --git a/include/dt-bindings/power/qcom-aoss-qmp.h b/include/dt-bindings/power/qcom-aoss-qmp.h
deleted file mode 100644
index ec336d31dee4..000000000000
--- a/include/dt-bindings/power/qcom-aoss-qmp.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* Copyright (c) 2018, Linaro Ltd. */
-
-#ifndef __DT_BINDINGS_POWER_QCOM_AOSS_QMP_H
-#define __DT_BINDINGS_POWER_QCOM_AOSS_QMP_H
-
-#define AOSS_QMP_LS_CDSP		0
-#define AOSS_QMP_LS_LPASS	1
-#define AOSS_QMP_LS_MODEM	2
-#define AOSS_QMP_LS_SLPI		3
-#define AOSS_QMP_LS_SPSS		4
-#define AOSS_QMP_LS_VENUS	5
-
-#endif
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: [PATCH v5 02/13] dt-bindings: remoteproc: qcom: pas: Add QMP property
  2021-08-19  3:02 ` [PATCH v5 02/13] dt-bindings: remoteproc: qcom: pas: Add QMP property Sibi Sankar
@ 2021-08-19 18:55   ` Stephen Boyd
  2021-08-20 14:24     ` Sibi Sankar
  0 siblings, 1 reply; 20+ messages in thread
From: Stephen Boyd @ 2021-08-19 18:55 UTC (permalink / raw)
  To: Sibi Sankar, bjorn.andersson, mka, robh+dt
  Cc: ulf.hansson, rjw, agross, ohad, mathieu.poirier, linux-arm-msm,
	linux-remoteproc, devicetree, linux-kernel, dianders, rishabhb,
	sidgup

Quoting Sibi Sankar (2021-08-18 20:02:05)
> The load state power-domain, used by the co-processors to notify the
> Always on Subsystem (AOSS) that a particular co-processor is up/down,
> suffers from the side-effect of changing states during suspend/resume.
> However the co-processors enter low-power modes independent to that of
> the application processor and their states are expected to remain
> unaltered across system suspend/resume cycles. To achieve this behavior
> let's drop the load state power-domain and replace them with the qmp
> property for all SoCs supporting low power mode signalling.
>

How do we drop the load state property without breaking existing DTBs?
Maybe we need to leave it there and then somehow make it optional? Or do
we not care about this problem as the driver will start ignoring it?

^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: [PATCH v5 02/13] dt-bindings: remoteproc: qcom: pas: Add QMP property
  2021-08-19 18:55   ` Stephen Boyd
@ 2021-08-20 14:24     ` Sibi Sankar
  2021-08-21 18:17       ` Stephen Boyd
  0 siblings, 1 reply; 20+ messages in thread
From: Sibi Sankar @ 2021-08-20 14:24 UTC (permalink / raw)
  To: Stephen Boyd
  Cc: bjorn.andersson, mka, robh+dt, ulf.hansson, rjw, agross, ohad,
	mathieu.poirier, linux-arm-msm, linux-remoteproc, devicetree,
	linux-kernel, dianders, rishabhb, sidgup

On 2021-08-20 00:25, Stephen Boyd wrote:
> Quoting Sibi Sankar (2021-08-18 20:02:05)
>> The load state power-domain, used by the co-processors to notify the
>> Always on Subsystem (AOSS) that a particular co-processor is up/down,
>> suffers from the side-effect of changing states during suspend/resume.
>> However the co-processors enter low-power modes independent to that of
>> the application processor and their states are expected to remain
>> unaltered across system suspend/resume cycles. To achieve this 
>> behavior
>> let's drop the load state power-domain and replace them with the qmp
>> property for all SoCs supporting low power mode signalling.
>> 
> 
> How do we drop the load state property without breaking existing DTBs?
> Maybe we need to leave it there and then somehow make it optional? Or 
> do
> we not care about this problem as the driver will start ignoring it?

We can afford to break the bindings
because of the following reason:

* Load state in mainline is currently
   broken i.e. it doesn't serve its
   main purpose of signalling AOP of
   the correct state of Q6 during
   system suspend/resume. Thus we
   can maintain current functionality
   even without the load state votes
   i.e. when a new kernel with load
   state removed is used with an older
   dtb the remoteproc functionality
   will remain the same.


-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.

^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: [PATCH v5 02/13] dt-bindings: remoteproc: qcom: pas: Add QMP property
  2021-08-20 14:24     ` Sibi Sankar
@ 2021-08-21 18:17       ` Stephen Boyd
  2021-08-23 16:19         ` Sibi Sankar
  0 siblings, 1 reply; 20+ messages in thread
From: Stephen Boyd @ 2021-08-21 18:17 UTC (permalink / raw)
  To: Sibi Sankar
  Cc: bjorn.andersson, mka, robh+dt, ulf.hansson, rjw, agross, ohad,
	mathieu.poirier, linux-arm-msm, linux-remoteproc, devicetree,
	linux-kernel, dianders, rishabhb, sidgup

Quoting Sibi Sankar (2021-08-20 07:24:02)
> On 2021-08-20 00:25, Stephen Boyd wrote:
> > Quoting Sibi Sankar (2021-08-18 20:02:05)
> >> The load state power-domain, used by the co-processors to notify the
> >> Always on Subsystem (AOSS) that a particular co-processor is up/down,
> >> suffers from the side-effect of changing states during suspend/resume.
> >> However the co-processors enter low-power modes independent to that of
> >> the application processor and their states are expected to remain
> >> unaltered across system suspend/resume cycles. To achieve this
> >> behavior
> >> let's drop the load state power-domain and replace them with the qmp
> >> property for all SoCs supporting low power mode signalling.
> >>
> >
> > How do we drop the load state property without breaking existing DTBs?
> > Maybe we need to leave it there and then somehow make it optional? Or
> > do
> > we not care about this problem as the driver will start ignoring it?
>
> We can afford to break the bindings
> because of the following reason:
>
> * Load state in mainline is currently
>    broken i.e. it doesn't serve its
>    main purpose of signalling AOP of
>    the correct state of Q6 during
>    system suspend/resume. Thus we
>    can maintain current functionality
>    even without the load state votes
>    i.e. when a new kernel with load
>    state removed is used with an older
>    dtb the remoteproc functionality
>    will remain the same.
>

Alright. Is that reflected somewhere in the commit text? I must have
missed it. Can you please add it?

^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: [PATCH v5 02/13] dt-bindings: remoteproc: qcom: pas: Add QMP property
  2021-08-21 18:17       ` Stephen Boyd
@ 2021-08-23 16:19         ` Sibi Sankar
  2021-08-23 20:18           ` Stephen Boyd
  0 siblings, 1 reply; 20+ messages in thread
From: Sibi Sankar @ 2021-08-23 16:19 UTC (permalink / raw)
  To: Stephen Boyd
  Cc: bjorn.andersson, mka, robh+dt, ulf.hansson, rjw, agross, ohad,
	mathieu.poirier, linux-arm-msm, linux-remoteproc, devicetree,
	linux-kernel, dianders, rishabhb, sidgup

On 2021-08-21 23:47, Stephen Boyd wrote:
> Quoting Sibi Sankar (2021-08-20 07:24:02)
>> On 2021-08-20 00:25, Stephen Boyd wrote:
>> > Quoting Sibi Sankar (2021-08-18 20:02:05)
>> >> The load state power-domain, used by the co-processors to notify the
>> >> Always on Subsystem (AOSS) that a particular co-processor is up/down,
>> >> suffers from the side-effect of changing states during suspend/resume.
>> >> However the co-processors enter low-power modes independent to that of
>> >> the application processor and their states are expected to remain
>> >> unaltered across system suspend/resume cycles. To achieve this
>> >> behavior
>> >> let's drop the load state power-domain and replace them with the qmp
>> >> property for all SoCs supporting low power mode signalling.
>> >>
>> >
>> > How do we drop the load state property without breaking existing DTBs?
>> > Maybe we need to leave it there and then somehow make it optional? Or
>> > do
>> > we not care about this problem as the driver will start ignoring it?
>> 
>> We can afford to break the bindings
>> because of the following reason:
>> 
>> * Load state in mainline is currently
>>    broken i.e. it doesn't serve its
>>    main purpose of signalling AOP of
>>    the correct state of Q6 during
>>    system suspend/resume. Thus we
>>    can maintain current functionality
>>    even without the load state votes
>>    i.e. when a new kernel with load
>>    state removed is used with an older
>>    dtb the remoteproc functionality
>>    will remain the same.
>> 
> 
> Alright. Is that reflected somewhere in the commit text? I must have
> missed it. Can you please add it?

Commit message throughout the series
mention that the current load state
implementation is broken but it is
never mentioned explicitly that it
is the reason why bindings can be
broken. I'll wait for a couple of
days to see if I get any more
comments and will re-word it in the
next re-spin.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.

^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: [PATCH v5 04/13] remoteproc: qcom: q6v5: Use qmp_send to update co-processor load state
  2021-08-19  3:02 ` [PATCH v5 04/13] remoteproc: qcom: q6v5: Use qmp_send to update co-processor load state Sibi Sankar
@ 2021-08-23 20:17   ` Stephen Boyd
  0 siblings, 0 replies; 20+ messages in thread
From: Stephen Boyd @ 2021-08-23 20:17 UTC (permalink / raw)
  To: Sibi Sankar, bjorn.andersson, mka, robh+dt
  Cc: ulf.hansson, rjw, agross, ohad, mathieu.poirier, linux-arm-msm,
	linux-remoteproc, devicetree, linux-kernel, dianders, rishabhb,
	sidgup

Quoting Sibi Sankar (2021-08-18 20:02:07)
> The power domains exposed by the AOSS QMP driver control the load state
> resources linked to modem, adsp, cdsp remoteprocs. These are used to
> notify the Always on Subsystem (AOSS) that a particular co-processor is
> up/down. AOSS uses this information to wait for the co-processors to
> suspend before starting its sleep sequence.
>
> These co-processors enter low-power modes independent to that of the
> application processor and the load state resources linked to them are
> expected to remain unaltered across system suspend/resume cycles. To
> achieve this behavior lets stop using the power-domains exposed by the
> AOSS QMP node and replace them with generic qmp_send interface instead.
>
> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: [PATCH v5 02/13] dt-bindings: remoteproc: qcom: pas: Add QMP property
  2021-08-23 16:19         ` Sibi Sankar
@ 2021-08-23 20:18           ` Stephen Boyd
  0 siblings, 0 replies; 20+ messages in thread
From: Stephen Boyd @ 2021-08-23 20:18 UTC (permalink / raw)
  To: Sibi Sankar
  Cc: bjorn.andersson, mka, robh+dt, ulf.hansson, rjw, agross, ohad,
	mathieu.poirier, linux-arm-msm, linux-remoteproc, devicetree,
	linux-kernel, dianders, rishabhb, sidgup

Quoting Sibi Sankar (2021-08-23 09:19:08)
> On 2021-08-21 23:47, Stephen Boyd wrote:
> > Quoting Sibi Sankar (2021-08-20 07:24:02)
> >> On 2021-08-20 00:25, Stephen Boyd wrote:
> >> > Quoting Sibi Sankar (2021-08-18 20:02:05)
> >> >> The load state power-domain, used by the co-processors to notify the
> >> >> Always on Subsystem (AOSS) that a particular co-processor is up/down,
> >> >> suffers from the side-effect of changing states during suspend/resume.
> >> >> However the co-processors enter low-power modes independent to that of
> >> >> the application processor and their states are expected to remain
> >> >> unaltered across system suspend/resume cycles. To achieve this
> >> >> behavior
> >> >> let's drop the load state power-domain and replace them with the qmp
> >> >> property for all SoCs supporting low power mode signalling.
> >> >>
> >> >
> >> > How do we drop the load state property without breaking existing DTBs?
> >> > Maybe we need to leave it there and then somehow make it optional? Or
> >> > do
> >> > we not care about this problem as the driver will start ignoring it?
> >>
> >> We can afford to break the bindings
> >> because of the following reason:
> >>
> >> * Load state in mainline is currently
> >>    broken i.e. it doesn't serve its
> >>    main purpose of signalling AOP of
> >>    the correct state of Q6 during
> >>    system suspend/resume. Thus we
> >>    can maintain current functionality
> >>    even without the load state votes
> >>    i.e. when a new kernel with load
> >>    state removed is used with an older
> >>    dtb the remoteproc functionality
> >>    will remain the same.
> >>
> >
> > Alright. Is that reflected somewhere in the commit text? I must have
> > missed it. Can you please add it?
>
> Commit message throughout the series
> mention that the current load state
> implementation is broken but it is
> never mentioned explicitly that it
> is the reason why bindings can be
> broken. I'll wait for a couple of
> days to see if I get any more
> comments and will re-word it in the
> next re-spin.
>

Ok. You can add my Reviewed-by tag with that text updated.

^ permalink raw reply	[flat|nested] 20+ messages in thread

end of thread, other threads:[~2021-08-23 20:18 UTC | newest]

Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-19  3:02 [PATCH v5 00/13] Use qmp_send to update co-processor load state Sibi Sankar
2021-08-19  3:02 ` [PATCH v5 01/13] dt-bindings: soc: qcom: aoss: Drop the load state power-domain Sibi Sankar
2021-08-19  3:02 ` [PATCH v5 02/13] dt-bindings: remoteproc: qcom: pas: Add QMP property Sibi Sankar
2021-08-19 18:55   ` Stephen Boyd
2021-08-20 14:24     ` Sibi Sankar
2021-08-21 18:17       ` Stephen Boyd
2021-08-23 16:19         ` Sibi Sankar
2021-08-23 20:18           ` Stephen Boyd
2021-08-19  3:02 ` [PATCH v5 03/13] dt-bindings: remoteproc: qcom: " Sibi Sankar
2021-08-19  3:02 ` [PATCH v5 04/13] remoteproc: qcom: q6v5: Use qmp_send to update co-processor load state Sibi Sankar
2021-08-23 20:17   ` Stephen Boyd
2021-08-19  3:02 ` [PATCH v5 05/13] arm64: dts: qcom: sc7180: Use QMP property to control " Sibi Sankar
2021-08-19  3:02 ` [PATCH v5 06/13] arm64: dts: qcom: sc7280: " Sibi Sankar
2021-08-19  3:02 ` [PATCH v5 07/13] arm64: dts: qcom: sdm845: " Sibi Sankar
2021-08-19  3:02 ` [PATCH v5 08/13] arm64: dts: qcom: sm8150: " Sibi Sankar
2021-08-19  3:02 ` [PATCH v5 09/13] arm64: dts: qcom: sm8250: " Sibi Sankar
2021-08-19  3:02 ` [PATCH v5 10/13] arm64: dts: qcom: sm8350: " Sibi Sankar
2021-08-19  3:02 ` [PATCH v5 11/13] soc: qcom: aoss: Drop power domain support Sibi Sankar
2021-08-19  3:02 ` [PATCH v5 12/13] dt-bindings: msm/dp: Remove aoss-qmp header Sibi Sankar
2021-08-19  3:02 ` [PATCH v5 13/13] dt-bindings: soc: qcom: aoss: Delete unused power-domain definitions Sibi Sankar

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).