LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Rajesh Patil <rajpat@codeaurora.org>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Rob Herring <robh+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, rnayak@codeaurora.org,
	saiprakash.ranjan@codeaurora.org, msavaliy@qti.qualcomm.com,
	skakit@codeaurora.org, sboyd@kernel.org,
	Roja Rani Yarubandi <rojay@codeaurora.org>,
	Rajesh Patil <rajpat@codeaurora.org>
Subject: [PATCH V6 4/7] arm64: dts: sc7280: Update QUPv3 UART5 DT node
Date: Thu, 26 Aug 2021 18:45:28 +0530	[thread overview]
Message-ID: <1629983731-10595-5-git-send-email-rajpat@codeaurora.org> (raw)
In-Reply-To: <1629983731-10595-1-git-send-email-rajpat@codeaurora.org>

From: Roja Rani Yarubandi <rojay@codeaurora.org>

Update the compatible string as "qcom,geni-uart".
Add interconnects and power-domains. Split the pinctrl
functions and correct the gpio pins.

split the pinctrl functions to match with SoC dt

Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org>
Signed-off-by: Rajesh Patil <rajpat@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 19 ++++++++-----------
 arch/arm64/boot/dts/qcom/sc7280.dtsi     | 30 +++++++++++++++++++++++++-----
 2 files changed, 33 insertions(+), 16 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index c41c2d0..53993b3 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -254,6 +254,7 @@
 };
 
 &uart5 {
+	compatible = "qcom,geni-debug-uart";
 	status = "okay";
 };
 
@@ -311,18 +312,14 @@
 	bias-pull-up;
 };
 
-&qup_uart5_default {
-	tx {
-		pins = "gpio46";
-		drive-strength = <2>;
-		bias-disable;
-	};
+&qup_uart5_tx {
+	drive-strength = <2>;
+	bias-disable;
+};
 
-	rx {
-		pins = "gpio47";
-		drive-strength = <2>;
-		bias-pull-up;
-	};
+&qup_uart5_rx {
+	drive-strength = <2>;
+	bias-pull-up;
 };
 
 &sdc1_on {
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index da3cf19..a3c11b0 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -861,13 +861,18 @@
 			};
 
 			uart5: serial@994000 {
-				compatible = "qcom,geni-debug-uart";
+				compatible = "qcom,geni-uart";
 				reg = <0 0x00994000 0 0x4000>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
 				clock-names = "se";
 				pinctrl-names = "default";
-				pinctrl-0 = <&qup_uart5_default>;
+				pinctrl-0 = <&qup_uart5_cts>, <&qup_uart5_rts>, <&qup_uart5_tx>, <&qup_uart5_rx>;
 				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -2255,9 +2260,24 @@
 				function = "qup04";
 			};
 
-			qup_uart5_default: qup-uart5-default {
-				pins = "gpio46", "gpio47";
-				function = "qup13";
+			qup_uart5_cts: qup-uart5-cts {
+				pins = "gpio20";
+				function = "qup05";
+			};
+
+			qup_uart5_rts: qup-uart5-rts {
+				pins = "gpio21";
+				function = "qup05";
+			};
+
+			qup_uart5_tx: qup-uart5-tx {
+				pins = "gpio22";
+				function = "qup05";
+			};
+
+			qup_uart5_rx: qup-uart5-rx {
+				pins = "gpio23";
+				function = "qup05";
 			};
 
 			qup_uart6_cts: qup-uart6-cts {
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation


  parent reply	other threads:[~2021-08-26 13:16 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-26 13:15 [PATCH V6 0/7] Add QSPI and QUPv3 DT nodes for SC7280 SoC Rajesh Patil
2021-08-26 13:15 ` [PATCH V6 1/7] arm64: dts: sc7280: Add QSPI node Rajesh Patil
2021-08-26 18:02   ` Stephen Boyd
2021-08-31 15:29     ` rajpat
2021-08-26 13:15 ` [PATCH V6 2/7] arm64: dts: sc7280: Configure SPI-NOR FLASH for sc7280-idp Rajesh Patil
2021-08-26 18:03   ` Stephen Boyd
2021-08-26 13:15 ` [PATCH V6 3/7] arm64: dts: sc7280: Add QUPv3 wrapper_0 nodes Rajesh Patil
2021-08-26 18:06   ` Stephen Boyd
2021-08-31 15:28     ` rajpat
2021-08-26 20:08   ` Matthias Kaehlcke
2021-08-26 13:15 ` Rajesh Patil [this message]
2021-08-26 21:01   ` [PATCH V6 4/7] arm64: dts: sc7280: Update QUPv3 UART5 DT node Matthias Kaehlcke
2021-08-31 15:27     ` rajpat
2021-08-26 13:15 ` [PATCH V6 5/7] arm64: dts: sc7280: Configure uart7 to support bluetooth on sc7280-idp Rajesh Patil
2021-08-26 13:15 ` [PATCH V6 6/7] arm64: dts: sc7280: Add QUPv3 wrapper_1 nodes Rajesh Patil
2021-08-26 18:11   ` Stephen Boyd
2021-08-31 15:28     ` rajpat
2021-09-01  5:04       ` Stephen Boyd
2021-08-26 13:15 ` [PATCH V6 7/7] arm64: dts: sc7280: Add aliases for I2C and SPI Rajesh Patil
2021-08-26 18:12   ` Stephen Boyd
2021-08-31 15:29     ` rajpat

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1629983731-10595-5-git-send-email-rajpat@codeaurora.org \
    --to=rajpat@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=msavaliy@qti.qualcomm.com \
    --cc=rnayak@codeaurora.org \
    --cc=robh+dt@kernel.org \
    --cc=rojay@codeaurora.org \
    --cc=saiprakash.ranjan@codeaurora.org \
    --cc=sboyd@kernel.org \
    --cc=skakit@codeaurora.org \
    --subject='Re: [PATCH V6 4/7] arm64: dts: sc7280: Update QUPv3 UART5 DT node' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).