LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Richard Zhu <hongxing.zhu@nxp.com>
To: l.stach@pengutronix.de, marcel.ziswiler@toradex.com,
	tharvey@gateworks.com, kishon@ti.com, vkoul@kernel.org,
	robh@kernel.org, galak@kernel.crashing.org, shawnguo@kernel.org
Cc: linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, kernel@pengutronix.de,
	linux-imx@nxp.com
Subject: [PATCH v4 0/8] add the imx8m pcie phy driver and imx8mm pcie support
Date: Thu, 28 Oct 2021 15:27:09 +0800	[thread overview]
Message-ID: <1635406037-20900-1-git-send-email-hongxing.zhu@nxp.com> (raw)

Refer to the discussion [1] when try to enable i.MX8MM PCIe support,
one standalone PCIe PHY driver should be seperated from i.MX PCIe
driver when enable i.MX8MM PCIe support.

This patch-set adds the standalone PCIe PHY driver suport[1-5], and i.MX8MM
PCIe support[6-8] to have whole view to review this patch-set.

The PCIe works on i.MX8MM EVK board based the the blkctrl power driver
[2] and this patch-set.

[1] https://patchwork.ozlabs.org/project/linux-pci/patch/20210510141509.929120-3-l.stach@pengutronix.de/
[2] https://patchwork.kernel.org/project/linux-arm-kernel/cover/20210910202640.980366-1-l.stach@pengutronix.de/

Main changes v3 --> v4:
- Update the yaml to fix syntax error, add maxitems and drop description of phy
- Correct the clock name in PHY DT node.
- Squash the EVK board relalted dts changes into one patch, and drop the
  useless dummy clock and gpio suffix in DT nodes.
- Add board specific de-emphasis parameters as DT properties. Thus each board
  can specify its actual de-emphasis values.
- Update the commit log of PHY driver.
- Remove the useless codes from PCIe driver, since they are moved to PHY driver
- After the discussion and verification of the CLKREQ# configurations with Tim,
  agree to add an optional boolean property "fsl,clkreq-unsupported", indicates
  the CLKREQ# signal is hooked or not in HW designs.
- Add "Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>" tag, since
  Marcel help to test the v3 patch-set.

Main changes v2 --> v3:
- Regarding Lucas' comments.
 - to have a whole view to review the patches, send out the i.MX8MM PCIe support too.
 - move the PHY related bits manipulations of the GPR/SRC to standalone PHY driver.
 - split the dts changes to SOC and board DT, and use the enum instead of raw value.
 - update the license of the dt-binding header file.

Changes v1 --> v2:
- Update the license of the dt-binding header file to make the license
  compatible with dts files.
- Fix the dt_binding_check errors.

Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml    |   6 +++
Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml |  95 +++++++++++++++++++++++++++++++++
arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi                |  55 +++++++++++++++++++
arch/arm64/boot/dts/freescale/imx8mm.dtsi                    |  46 +++++++++++++++-
drivers/pci/controller/dwc/pci-imx6.c                        |  73 ++++++++++++++++++++++---
drivers/phy/freescale/Kconfig                                |   9 ++++
drivers/phy/freescale/Makefile                               |   1 +
drivers/phy/freescale/phy-fsl-imx8m-pcie.c                   | 234 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
include/dt-bindings/phy/phy-imx8-pcie.h                      |  14 +++++
9 files changed, 525 insertions(+), 8 deletions(-)

[PATCH v4 1/8] dt-bindings: phy: phy-imx8-pcie: Add binding for the
[PATCH v4 2/8] dt-bindings: phy: Add imx8 pcie phy driver support
[PATCH v4 3/8] dt-bindings: imx6q-pcie: Add PHY phandles and name
[PATCH v4 4/8] arm64: dts: imx8mm: Add the pcie phy support
[PATCH v4 5/8] phy: freescale: pcie: Initialize the imx8 pcie
[PATCH v4 6/8] arm64: dts: imx8mm: Add the pcie support
[PATCH v4 7/8] arm64: dts: imx8mm-evk: Add the pcie support on imx8mm
[PATCH v4 8/8] PCI: imx: Add the imx8mm pcie support

             reply	other threads:[~2021-10-28  7:53 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-28  7:27 Richard Zhu [this message]
2021-10-28  7:27 ` [PATCH v4 1/8] dt-bindings: phy: phy-imx8-pcie: Add binding for the pad modes of imx8 pcie phy Richard Zhu
2021-10-28  7:27 ` [PATCH v4 2/8] dt-bindings: phy: Add imx8 pcie phy driver support Richard Zhu
2021-10-28  7:27 ` [PATCH v4 3/8] dt-bindings: imx6q-pcie: Add PHY phandles and name properties Richard Zhu
2021-10-28  7:27 ` [PATCH v4 4/8] arm64: dts: imx8mm: Add the pcie phy support Richard Zhu
2021-10-28  7:27 ` [PATCH v4 5/8] phy: freescale: pcie: Initialize the imx8 pcie standalone phy driver Richard Zhu
2021-10-29  8:12   ` Marcel Ziswiler
2021-10-29  8:45     ` Richard Zhu
2021-10-29 17:44       ` Tim Harvey
2021-11-01  8:19         ` Richard Zhu
2021-11-01 17:13           ` Tim Harvey
2021-11-01 23:52             ` Marcel Ziswiler
2021-11-02  2:41               ` Richard Zhu
2021-10-28  7:27 ` [PATCH v4 6/8] arm64: dts: imx8mm: Add the pcie support Richard Zhu
2021-10-28  7:27 ` [PATCH v4 7/8] arm64: dts: imx8mm-evk: Add the pcie support on imx8mm evk board Richard Zhu
2021-10-29  8:21   ` Marcel Ziswiler
2021-10-29  8:46     ` Richard Zhu
2021-10-28  7:27 ` [PATCH v4 8/8] PCI: imx: Add the imx8mm pcie support Richard Zhu
2021-10-28 18:17 ` [PATCH v4 0/8] add the imx8m pcie phy driver and " Tim Harvey
2021-10-29  1:11   ` Richard Zhu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1635406037-20900-1-git-send-email-hongxing.zhu@nxp.com \
    --to=hongxing.zhu@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@kernel.crashing.org \
    --cc=kernel@pengutronix.de \
    --cc=kishon@ti.com \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=marcel.ziswiler@toradex.com \
    --cc=robh@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=tharvey@gateworks.com \
    --cc=vkoul@kernel.org \
    --subject='Re: [PATCH v4 0/8] add the imx8m pcie phy driver and imx8mm pcie support' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).