LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Abel Vesa <abel.vesa@nxp.com>
To: Rob Herring <robh@kernel.org>,
Dong Aisheng <aisheng.dong@nxp.com>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Fabio Estevam <festevam@gmail.com>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>,
linux-i2c@vger.kernel.org, linux-serial@vger.kernel.org,
NXP Linux Team <linux-imx@nxp.com>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
Abel Vesa <abel.vesa@nxp.com>, Jacky Bai <ping.bai@nxp.com>
Subject: [PATCH v4 06/12] arm64: dts: freescale: Add the imx8dxl connectivity subsys dtsi
Date: Wed, 10 Nov 2021 19:46:49 +0200 [thread overview]
Message-ID: <1636566415-22750-7-git-send-email-abel.vesa@nxp.com> (raw)
In-Reply-To: <1636566415-22750-1-git-send-email-abel.vesa@nxp.com>
From: Jacky Bai <ping.bai@nxp.com>
On i.MX8DXL, the Connectivity subsystem includes below peripherals:
1x ENET with AVB support, 1x ENET with TSN support, 2x USB OTG,
1x eMMC, 2x SD, 1x NAND.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
---
.../boot/dts/freescale/imx8dxl-ss-conn.dtsi | 137 ++++++++++++++++++
1 file changed, 137 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
new file mode 100644
index 000000000000..b0059296a03f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019-2021 NXP
+ */
+
+/delete-node/ &enet1_lpcg;
+/delete-node/ &fec2;
+
+&conn_subsys {
+ conn_enet0_root_clk: clock-conn-enet0-root {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <250000000>;
+ clock-output-names = "conn_enet0_root_clk";
+ };
+
+ eqos: ethernet@5b050000 {
+ compatible = "nxp,imx8dxl-dwmac-eqos", "snps,dwmac-5.10a";
+ reg = <0x5b050000 0x10000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eth_wake_irq", "macirq";
+ clocks = <&eqos_lpcg IMX_LPCG_CLK_2>,
+ <&eqos_lpcg IMX_LPCG_CLK_4>,
+ <&eqos_lpcg IMX_LPCG_CLK_0>,
+ <&eqos_lpcg IMX_LPCG_CLK_3>,
+ <&eqos_lpcg IMX_LPCG_CLK_1>;
+ clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem";
+ assigned-clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <125000000>;
+ power-domains = <&pd IMX_SC_R_ENET_1>;
+ clk_csr = <0>;
+ status = "disabled";
+ };
+
+ usbotg2: usb@5b0e0000 {
+ compatible = "fsl,imx8dxl-usb", "fsl,imx7ulp-usb";
+ reg = <0x5b0e0000 0x200>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,usbphy = <&usbphy2>;
+ fsl,usbmisc = <&usbmisc2 0>;
+ /*
+ * usbotg1 and usbotg2 share one clcok
+ * scfw disable clock access and keep it always on
+ * in case other core (M4) use one of these.
+ */
+ clocks = <&clk_dummy>;
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
+ #stream-id-cells = <1>;
+ power-domains = <&pd IMX_SC_R_USB_1>;
+ status = "disabled";
+ };
+
+ usbmisc2: usbmisc@5b0e0200 {
+ #index-cells = <1>;
+ compatible = "fsl,imx8dxl-usbmisc", "fsl,imx7ulp-usbmisc";
+ reg = <0x5b0e0200 0x200>;
+ };
+
+ usbphy2: usbphy@0x5b110000 {
+ compatible = "fsl,imx8dxl-usbphy", "fsl,imx7ulp-usbphy";
+ reg = <0x5b110000 0x1000>;
+ clocks = <&usb2_2_lpcg IMX_LPCG_CLK_7>;
+ status = "disabled";
+ };
+
+ eqos_lpcg: clock-controller@5b240000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5b240000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&conn_enet0_root_clk>,
+ <&conn_axi_clk>,
+ <&conn_axi_clk>,
+ <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>,
+ <&conn_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>,
+ <IMX_LPCG_CLK_2>,
+ <IMX_LPCG_CLK_4>,
+ <IMX_LPCG_CLK_5>,
+ <IMX_LPCG_CLK_6>;
+ clock-output-names = "eqos_ptp",
+ "eqos_mem_clk",
+ "eqos_aclk",
+ "eqos_clk",
+ "eqos_csr_clk";
+ power-domains = <&pd IMX_SC_R_ENET_1>;
+ };
+
+ usb2_2_lpcg: clock-controller@5b280000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5b280000 0x10000>;
+ #clock-cells = <1>;
+
+ clock-indices = <IMX_LPCG_CLK_7>;
+ clocks = <&conn_ipg_clk>;
+ clock-output-names = "usboh3_2_phy_ipg_clk";
+ };
+
+};
+
+&enet0_lpcg {
+ clocks = <&conn_enet0_root_clk>,
+ <&conn_enet0_root_clk>,
+ <&conn_axi_clk>,
+ <&clk IMX_SC_R_ENET_0 IMX_SC_C_TXCLK>,
+ <&conn_ipg_clk>,
+ <&conn_ipg_clk>;
+};
+
+&fec1 {
+ compatible = "fsl,imx8dxl-fec", "fsl,imx8qm-fec";
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+ assigned-clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_C_CLKDIV>;
+ assigned-clock-rates = <125000000>;
+};
+
+&usdhc1 {
+ compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
+ interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usdhc2 {
+ compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
+ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usdhc3 {
+ compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+};
--
2.31.1
next prev parent reply other threads:[~2021-11-10 17:47 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-10 17:46 [PATCH v4 00/12] arm64: dts: Add i.MX8DXL initial support Abel Vesa
2021-11-10 17:46 ` [PATCH v4 01/12] dt-bindings: i2c: imx-lpi2c: Fix i.MX 8QM compatible matching Abel Vesa
2021-11-19 0:56 ` Rob Herring
2021-11-23 8:52 ` Wolfram Sang
2021-11-23 8:53 ` Wolfram Sang
2021-11-10 17:46 ` [PATCH v4 02/12] dt-bindings: serial: fsl-lpuart: " Abel Vesa
2021-11-19 1:02 ` Rob Herring
2021-11-10 17:46 ` [PATCH v4 03/12] arm64: dts: freescale: Add the top level dtsi support for imx8dxl Abel Vesa
2021-11-10 17:46 ` [PATCH v4 04/12] arm64: dts: imx8-ss-lsio: Add mu5a mailbox Abel Vesa
2021-11-10 17:46 ` [PATCH v4 05/12] arm64: dts: freescale: Add adma subsystem dtsi for imx8dxl Abel Vesa
2021-11-10 17:46 ` Abel Vesa [this message]
2021-11-10 17:46 ` [PATCH v4 07/12] arm64: dts: freescale: Add ddr subsys " Abel Vesa
2021-11-10 17:46 ` [PATCH v4 08/12] arm64: dts: freescale: Add lsio " Abel Vesa
2021-11-10 17:46 ` [PATCH v4 09/12] arm64: dts: imx8dxl: Add i.MX8DXL evk board support Abel Vesa
2021-11-10 17:46 ` [PATCH v4 10/12] dt-bindings: fsl: scu: Add i.MX8DXL ocotp binding Abel Vesa
2021-11-10 17:46 ` [PATCH v4 11/12] dt-bindings: i2c: imx-lpi2c: Add i.MX8DXL compatible match Abel Vesa
2021-11-19 1:02 ` Rob Herring
2021-11-29 8:41 ` Wolfram Sang
2021-11-10 17:46 ` [PATCH v4 12/12] dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatible Abel Vesa
2021-11-19 1:04 ` Rob Herring
2021-11-19 7:17 ` (EXT) " Alexander Stein
2021-11-22 16:45 ` Abel Vesa
2021-11-23 7:30 ` (EXT) " Alexander Stein
2021-11-25 13:19 ` Abel Vesa
2021-11-25 13:23 ` (EXT) " Alexander Stein
2021-11-22 16:29 ` Abel Vesa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1636566415-22750-7-git-send-email-abel.vesa@nxp.com \
--to=abel.vesa@nxp.com \
--cc=aisheng.dong@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=ping.bai@nxp.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--subject='Re: [PATCH v4 06/12] arm64: dts: freescale: Add the imx8dxl connectivity subsys dtsi' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).