[PATCH V1] mtd: spi-nor: winbond: Add support for winbond chip

[PATCH V1] mtd: spi-nor: winbond: Add support for winbond chip

[Shaik Sajida Bhanu]

Add support for winbond W25Q512NW-IM chip.

Signed-off-by: Shaik Sajida Bhanu <quic_c_sbhanu@quicinc.com>
---
 drivers/mtd/spi-nor/winbond.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mtd/spi-nor/winbond.c b/drivers/mtd/spi-nor/winbond.c
index 96573f6..cdfa2ee 100644
--- a/drivers/mtd/spi-nor/winbond.c
+++ b/drivers/mtd/spi-nor/winbond.c
@@ -100,6 +100,9 @@ static const struct flash_info winbond_parts[] = {
 			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
 	{ "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024,
 			    SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_DUAL_READ) },
+	{"w25q512nw", INFO(0xef8020, 0, 64 * 1024, 1024,
+			   SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			   SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
 	{ "w25q512jvq", INFO(0xef4020, 0, 64 * 1024, 1024,
 			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
 };
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation

Re: [PATCH V1] mtd: spi-nor: winbond: Add support for winbond chip

[Doug Anderson]

Hi,

On Thu, Nov 25, 2021 at 10:56 PM Shaik Sajida Bhanu
<quic_c_sbhanu@quicinc.com> wrote:
>
> Add support for winbond W25Q512NW-IM chip.
>
> Signed-off-by: Shaik Sajida Bhanu <quic_c_sbhanu@quicinc.com>
> ---
>  drivers/mtd/spi-nor/winbond.c | 3 +++
>  1 file changed, 3 insertions(+)
>
> diff --git a/drivers/mtd/spi-nor/winbond.c b/drivers/mtd/spi-nor/winbond.c
> index 96573f6..cdfa2ee 100644
> --- a/drivers/mtd/spi-nor/winbond.c
> +++ b/drivers/mtd/spi-nor/winbond.c
> @@ -100,6 +100,9 @@ static const struct flash_info winbond_parts[] = {
>                              SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
>         { "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024,
>                             SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_DUAL_READ) },
> +       {"w25q512nw", INFO(0xef8020, 0, 64 * 1024, 1024,
> +                          SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
> +                          SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
>         { "w25q512jvq", INFO(0xef4020, 0, 64 * 1024, 1024,
>                              SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },

I have no comments on the contents of this patch, but your spacing is
off. The entry above and below you have a space between the "{" and
the string with the name of the flash part. You should match.

-Doug

RE: [PATCH V1] mtd: spi-nor: winbond: Add support for winbond chip

[Sajida Bhanu (Temp) (QUIC)]

Hi Doug,

Sure thanks for the review.

Will address comment and share the patch .

Thanks,
Sajida
-----Original Message-----
From: Doug Anderson <dianders@chromium.org> 
Sent: Wednesday, December 1, 2021 3:01 AM
To: Sajida Bhanu (Temp) (QUIC) <quic_c_sbhanu@quicinc.com>
Cc: tudor.ambarus@microchip.com; michael@walle.cc; p.yadav@ti.com; miquel.raynal@bootlin.com; richard@nod.at; vigneshr@ti.com; linux-mtd@lists.infradead.org; linux-kernel@vger.kernel.org; stummala@codeaurora.org; vbadigan@codeaurora.org; Ram Prakash Gupta (QUIC) <quic_rampraka@quicinc.com>; Pradeep Pragallapati (QUIC) <quic_pragalla@quicinc.com>; sartgarg@codeaurora.org
Subject: Re: [PATCH V1] mtd: spi-nor: winbond: Add support for winbond chip

Hi,

On Thu, Nov 25, 2021 at 10:56 PM Shaik Sajida Bhanu <quic_c_sbhanu@quicinc.com> wrote:
>
> Add support for winbond W25Q512NW-IM chip.
>
> Signed-off-by: Shaik Sajida Bhanu <quic_c_sbhanu@quicinc.com>
> ---
>  drivers/mtd/spi-nor/winbond.c | 3 +++
>  1 file changed, 3 insertions(+)
>
> diff --git a/drivers/mtd/spi-nor/winbond.c 
> b/drivers/mtd/spi-nor/winbond.c index 96573f6..cdfa2ee 100644
> --- a/drivers/mtd/spi-nor/winbond.c
> +++ b/drivers/mtd/spi-nor/winbond.c
> @@ -100,6 +100,9 @@ static const struct flash_info winbond_parts[] = {
>                              SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
>         { "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024,
>                             SECT_4K | SPI_NOR_QUAD_READ | 
> SPI_NOR_DUAL_READ) },
> +       {"w25q512nw", INFO(0xef8020, 0, 64 * 1024, 1024,
> +                          SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
> +                          SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
>         { "w25q512jvq", INFO(0xef4020, 0, 64 * 1024, 1024,
>                              SECT_4K | SPI_NOR_DUAL_READ | 
> SPI_NOR_QUAD_READ) },

I have no comments on the contents of this patch, but your spacing is off. The entry above and below you have a space between the "{" and the string with the name of the flash part. You should match.

-Doug