LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [RESEND PATCH v3 00/10] A bunch of fix and optimization patches in spmi-pmic-arb.c
@ 2021-12-02  0:00 Fenglin Wu
  2021-12-02  0:00 ` [RESEND PATCH v3 01/10] spmi: pmic-arb: handle spurious interrupt Fenglin Wu
                   ` (9 more replies)
  0 siblings, 10 replies; 20+ messages in thread
From: Fenglin Wu @ 2021-12-02  0:00 UTC (permalink / raw)
  To: linux-arm-msm, linux-kernel, sboyd
  Cc: collinsd, subbaram, quic_fenglinw, tglx, maz

  Resend the series and cc irqchip maintainers.

  Remove [v2 07/10], it's no longer needed after this change:
	https://lore.kernel.org/all/20211118034719.28971-1-quic_collinsd@quicinc.com/T/#u
  In [v3 07/10], update the author email to match with Signed-off-by.
  In [v3 10/10], address issues in qcom,spmi-pmic-arb.yaml


Abhijeet Dharmapurikar (1):
  spmi: pmic-arb: handle spurious interrupt

Ashay Jaiswal (1):
  spmi: pmic-arb: add support to dispatch interrupt based on IRQ status

David Collins (6):
  spmi: pmic-arb: check apid against limits before calling irq handler
  spmi: pmic-arb: correct duplicate APID to PPID mapping logic
  spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
  bindings: spmi: spmi-pmic-arb: mark interrupt properties as optional
  spmi: pmic-arb: make interrupt support optional
  spmi: pmic-arb: increase SPMI transaction timeout delay

Fenglin Wu (1):
  dt-bindings: convert qcom,spmi-pmic-arb binding to YAML format

Subbaraman Narayanamurthy (1):
  spmi: pmic-arb: do not ack and clear peripheral interrupts in
    cleanup_irq

 .../bindings/spmi/qcom,spmi-pmic-arb.txt           |  65 ----------
 .../bindings/spmi/qcom,spmi-pmic-arb.yaml          | 128 +++++++++++++++++++
 Documentation/devicetree/bindings/spmi/spmi.yaml   |   3 +-
 drivers/spmi/spmi-pmic-arb.c                       | 137 +++++++++++++++------
 4 files changed, 226 insertions(+), 107 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
 create mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml

-- 
2.7.4


^ permalink raw reply	[flat|nested] 20+ messages in thread

* [RESEND PATCH v3 01/10] spmi: pmic-arb: handle spurious interrupt
  2021-12-02  0:00 [RESEND PATCH v3 00/10] A bunch of fix and optimization patches in spmi-pmic-arb.c Fenglin Wu
@ 2021-12-02  0:00 ` Fenglin Wu
  2021-12-02  2:39   ` Bryan O'Donoghue
  2021-12-02  0:00 ` [RESEND PATCH v3 02/10] spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq Fenglin Wu
                   ` (8 subsequent siblings)
  9 siblings, 1 reply; 20+ messages in thread
From: Fenglin Wu @ 2021-12-02  0:00 UTC (permalink / raw)
  To: linux-arm-msm, linux-kernel, sboyd
  Cc: collinsd, subbaram, quic_fenglinw, tglx, maz, Abhijeet Dharmapurikar

From: Abhijeet Dharmapurikar <adharmap@codeaurora.org>

Call handle_bad_irq() for handling spurious interrupt. While at it,
add an error print in cleanup_irq() for any spurious interrupt which
is fired but not having interrupt handler registered.

Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
---
 drivers/spmi/spmi-pmic-arb.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
index bbbd311..da629cc 100644
--- a/drivers/spmi/spmi-pmic-arb.c
+++ b/drivers/spmi/spmi-pmic-arb.c
@@ -489,6 +489,8 @@ static void cleanup_irq(struct spmi_pmic_arb *pmic_arb, u16 apid, int id)
 	u8 per = ppid & 0xFF;
 	u8 irq_mask = BIT(id);
 
+	dev_err_ratelimited(&pmic_arb->spmic->dev, "%s apid=%d sid=0x%x per=0x%x irq=%d\n",
+			__func__, apid, sid, per, id);
 	writel_relaxed(irq_mask, pmic_arb->ver_ops->irq_clear(pmic_arb, apid));
 
 	if (pmic_arb_write_cmd(pmic_arb->spmic, SPMI_CMD_EXT_WRITEL, sid,
@@ -502,10 +504,10 @@ static void cleanup_irq(struct spmi_pmic_arb *pmic_arb, u16 apid, int id)
 				irq_mask, ppid);
 }
 
-static void periph_interrupt(struct spmi_pmic_arb *pmic_arb, u16 apid)
+static int periph_interrupt(struct spmi_pmic_arb *pmic_arb, u16 apid)
 {
 	unsigned int irq;
-	u32 status, id;
+	u32 status, id, handled = 0;
 	u8 sid = (pmic_arb->apid_data[apid].ppid >> 8) & 0xF;
 	u8 per = pmic_arb->apid_data[apid].ppid & 0xFF;
 
@@ -520,7 +522,10 @@ static void periph_interrupt(struct spmi_pmic_arb *pmic_arb, u16 apid)
 			continue;
 		}
 		generic_handle_irq(irq);
+		handled++;
 	}
+
+	return (handled) ? 0 : -EINVAL;
 }
 
 static void pmic_arb_chained_irq(struct irq_desc *desc)
@@ -531,7 +536,7 @@ static void pmic_arb_chained_irq(struct irq_desc *desc)
 	int first = pmic_arb->min_apid >> 5;
 	int last = pmic_arb->max_apid >> 5;
 	u8 ee = pmic_arb->ee;
-	u32 status, enable;
+	u32 status, enable, handled = 0;
 	int i, id, apid;
 
 	chained_irq_enter(chip, desc);
@@ -546,10 +551,14 @@ static void pmic_arb_chained_irq(struct irq_desc *desc)
 			enable = readl_relaxed(
 					ver_ops->acc_enable(pmic_arb, apid));
 			if (enable & SPMI_PIC_ACC_ENABLE_BIT)
-				periph_interrupt(pmic_arb, apid);
+				if (periph_interrupt(pmic_arb, apid) == 0)
+					handled++;
 		}
 	}
 
+	if (handled == 0)
+		handle_bad_irq(desc);
+
 	chained_irq_exit(chip, desc);
 }
 
-- 
2.7.4


^ permalink raw reply	[flat|nested] 20+ messages in thread

* [RESEND PATCH v3 02/10] spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
  2021-12-02  0:00 [RESEND PATCH v3 00/10] A bunch of fix and optimization patches in spmi-pmic-arb.c Fenglin Wu
  2021-12-02  0:00 ` [RESEND PATCH v3 01/10] spmi: pmic-arb: handle spurious interrupt Fenglin Wu
@ 2021-12-02  0:00 ` Fenglin Wu
  2021-12-02  2:39   ` Bryan O'Donoghue
  2021-12-02  0:00 ` [RESEND PATCH v3 03/10] spmi: pmic-arb: check apid against limits before calling irq handler Fenglin Wu
                   ` (7 subsequent siblings)
  9 siblings, 1 reply; 20+ messages in thread
From: Fenglin Wu @ 2021-12-02  0:00 UTC (permalink / raw)
  To: linux-arm-msm, linux-kernel, sboyd
  Cc: collinsd, subbaram, quic_fenglinw, tglx, maz

From: Subbaraman Narayanamurthy <subbaram@codeaurora.org>

Currently, cleanup_irq() is invoked when a peripheral's interrupt
fires and there is no mapping present in the interrupt domain of
spmi interrupt controller.

The cleanup_irq clears the arbiter bit, clears the pmic interrupt
and disables it at the pmic in that order. The last disable in
cleanup_irq races with request_irq() in that it stomps over the
enable issued by request_irq. Fix this by not writing to the pmic
in cleanup_irq. The latched bit will be left set in the pmic,
which will not send us more interrupts even if the enable bit
stays enabled.

When a client wants to request an interrupt, use the activate
callback on the irq_domain to clear latched bit. This ensures
that the latched, if set due to the above changes in cleanup_irq
or when the bootloader leaves it set, gets cleaned up, paving way
for upcoming interrupts to trigger.

With this, there is a possibility of unwanted triggering of
interrupt right after the latched bit is cleared - the interrupt
may be left enabled too. To avoid that, clear the enable first
followed by clearing the latched bit in the activate callback.

Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
[collinsd@codeaurora.org: fix merge conflict]
Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
---
 drivers/spmi/spmi-pmic-arb.c | 15 +++++----------
 1 file changed, 5 insertions(+), 10 deletions(-)

diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
index da629cc..ce7ae99 100644
--- a/drivers/spmi/spmi-pmic-arb.c
+++ b/drivers/spmi/spmi-pmic-arb.c
@@ -492,16 +492,6 @@ static void cleanup_irq(struct spmi_pmic_arb *pmic_arb, u16 apid, int id)
 	dev_err_ratelimited(&pmic_arb->spmic->dev, "%s apid=%d sid=0x%x per=0x%x irq=%d\n",
 			__func__, apid, sid, per, id);
 	writel_relaxed(irq_mask, pmic_arb->ver_ops->irq_clear(pmic_arb, apid));
-
-	if (pmic_arb_write_cmd(pmic_arb->spmic, SPMI_CMD_EXT_WRITEL, sid,
-			(per << 8) + QPNPINT_REG_LATCHED_CLR, &irq_mask, 1))
-		dev_err_ratelimited(&pmic_arb->spmic->dev, "failed to ack irq_mask = 0x%x for ppid = %x\n",
-				irq_mask, ppid);
-
-	if (pmic_arb_write_cmd(pmic_arb->spmic, SPMI_CMD_EXT_WRITEL, sid,
-			       (per << 8) + QPNPINT_REG_EN_CLR, &irq_mask, 1))
-		dev_err_ratelimited(&pmic_arb->spmic->dev, "failed to ack irq_mask = 0x%x for ppid = %x\n",
-				irq_mask, ppid);
 }
 
 static int periph_interrupt(struct spmi_pmic_arb *pmic_arb, u16 apid)
@@ -674,6 +664,7 @@ static int qpnpint_irq_domain_activate(struct irq_domain *domain,
 	u16 apid = hwirq_to_apid(d->hwirq);
 	u16 sid = hwirq_to_sid(d->hwirq);
 	u16 irq = hwirq_to_irq(d->hwirq);
+	u8 buf;
 
 	if (pmic_arb->apid_data[apid].irq_ee != pmic_arb->ee) {
 		dev_err(&pmic_arb->spmic->dev, "failed to xlate sid = %#x, periph = %#x, irq = %u: ee=%u but owner=%u\n",
@@ -682,6 +673,10 @@ static int qpnpint_irq_domain_activate(struct irq_domain *domain,
 		return -ENODEV;
 	}
 
+	buf = BIT(irq);
+	qpnpint_spmi_write(d, QPNPINT_REG_EN_CLR, &buf, 1);
+	qpnpint_spmi_write(d, QPNPINT_REG_LATCHED_CLR, &buf, 1);
+
 	return 0;
 }
 
-- 
2.7.4


^ permalink raw reply	[flat|nested] 20+ messages in thread

* [RESEND PATCH v3 03/10] spmi: pmic-arb: check apid against limits before calling irq handler
  2021-12-02  0:00 [RESEND PATCH v3 00/10] A bunch of fix and optimization patches in spmi-pmic-arb.c Fenglin Wu
  2021-12-02  0:00 ` [RESEND PATCH v3 01/10] spmi: pmic-arb: handle spurious interrupt Fenglin Wu
  2021-12-02  0:00 ` [RESEND PATCH v3 02/10] spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq Fenglin Wu
@ 2021-12-02  0:00 ` Fenglin Wu
  2021-12-02  0:00 ` [RESEND PATCH v3 04/10] spmi: pmic-arb: add support to dispatch interrupt based on IRQ status Fenglin Wu
                   ` (6 subsequent siblings)
  9 siblings, 0 replies; 20+ messages in thread
From: Fenglin Wu @ 2021-12-02  0:00 UTC (permalink / raw)
  To: linux-arm-msm, linux-kernel, sboyd
  Cc: collinsd, subbaram, quic_fenglinw, tglx, maz

From: David Collins <collinsd@codeaurora.org>

Check that the apid for an SPMI interrupt falls between the
min_apid and max_apid that can be handled by the APPS processor
before invoking the per-apid interrupt handler:
periph_interrupt().

This avoids an access violation in rare cases where the status
bit is set for an interrupt that is not owned by the APPS
processor.

Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
---
 drivers/spmi/spmi-pmic-arb.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
index ce7ae99..479f721 100644
--- a/drivers/spmi/spmi-pmic-arb.c
+++ b/drivers/spmi/spmi-pmic-arb.c
@@ -523,21 +523,26 @@ static void pmic_arb_chained_irq(struct irq_desc *desc)
 	struct spmi_pmic_arb *pmic_arb = irq_desc_get_handler_data(desc);
 	const struct pmic_arb_ver_ops *ver_ops = pmic_arb->ver_ops;
 	struct irq_chip *chip = irq_desc_get_chip(desc);
-	int first = pmic_arb->min_apid >> 5;
-	int last = pmic_arb->max_apid >> 5;
+	int first = pmic_arb->min_apid;
+	int last = pmic_arb->max_apid;
 	u8 ee = pmic_arb->ee;
 	u32 status, enable, handled = 0;
 	int i, id, apid;
 
 	chained_irq_enter(chip, desc);
 
-	for (i = first; i <= last; ++i) {
+	for (i = first >> 5; i <= last >> 5; ++i) {
 		status = readl_relaxed(
 				ver_ops->owner_acc_status(pmic_arb, ee, i));
 		while (status) {
 			id = ffs(status) - 1;
 			status &= ~BIT(id);
 			apid = id + i * 32;
+			if (apid < first || apid > last) {
+				WARN_ONCE(true, "spurious spmi irq received for apid=%d\n",
+					apid);
+				continue;
+			}
 			enable = readl_relaxed(
 					ver_ops->acc_enable(pmic_arb, apid));
 			if (enable & SPMI_PIC_ACC_ENABLE_BIT)
-- 
2.7.4


^ permalink raw reply	[flat|nested] 20+ messages in thread

* [RESEND PATCH v3 04/10] spmi: pmic-arb: add support to dispatch interrupt based on IRQ status
  2021-12-02  0:00 [RESEND PATCH v3 00/10] A bunch of fix and optimization patches in spmi-pmic-arb.c Fenglin Wu
                   ` (2 preceding siblings ...)
  2021-12-02  0:00 ` [RESEND PATCH v3 03/10] spmi: pmic-arb: check apid against limits before calling irq handler Fenglin Wu
@ 2021-12-02  0:00 ` Fenglin Wu
  2021-12-02  0:00 ` [RESEND PATCH v3 05/10] spmi: pmic-arb: correct duplicate APID to PPID mapping logic Fenglin Wu
                   ` (5 subsequent siblings)
  9 siblings, 0 replies; 20+ messages in thread
From: Fenglin Wu @ 2021-12-02  0:00 UTC (permalink / raw)
  To: linux-arm-msm, linux-kernel, sboyd
  Cc: collinsd, subbaram, quic_fenglinw, tglx, maz, Ashay Jaiswal

From: Ashay Jaiswal <ashayj@codeaurora.org>

Current implementation of SPMI arbiter dispatches interrupt based on the
Arbiter's accumulator status, in some cases the accumulator status may
remain zero and the interrupt remains un-handled. Add logic to dispatch
interrupts based Arbiter's IRQ status if the accumulator status is zero.

Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
---
 drivers/spmi/spmi-pmic-arb.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
index 479f721..127a427 100644
--- a/drivers/spmi/spmi-pmic-arb.c
+++ b/drivers/spmi/spmi-pmic-arb.c
@@ -528,12 +528,18 @@ static void pmic_arb_chained_irq(struct irq_desc *desc)
 	u8 ee = pmic_arb->ee;
 	u32 status, enable, handled = 0;
 	int i, id, apid;
+	/* status based dispatch */
+	bool acc_valid = false;
+	u32 irq_status = 0;
 
 	chained_irq_enter(chip, desc);
 
 	for (i = first >> 5; i <= last >> 5; ++i) {
 		status = readl_relaxed(
 				ver_ops->owner_acc_status(pmic_arb, ee, i));
+		if (status)
+			acc_valid = true;
+
 		while (status) {
 			id = ffs(status) - 1;
 			status &= ~BIT(id);
@@ -551,6 +557,29 @@ static void pmic_arb_chained_irq(struct irq_desc *desc)
 		}
 	}
 
+	/* ACC_STATUS is empty but IRQ fired check IRQ_STATUS */
+	if (!acc_valid) {
+		for (i = first; i <= last; i++) {
+			/* skip if APPS is not irq owner */
+			if (pmic_arb->apid_data[i].irq_ee != pmic_arb->ee)
+				continue;
+
+			irq_status = readl_relaxed(
+					     ver_ops->irq_status(pmic_arb, i));
+			if (irq_status) {
+				enable = readl_relaxed(
+					     ver_ops->acc_enable(pmic_arb, i));
+				if (enable & SPMI_PIC_ACC_ENABLE_BIT) {
+					dev_dbg(&pmic_arb->spmic->dev,
+						"Dispatching IRQ for apid=%d status=%x\n",
+						i, irq_status);
+					if (periph_interrupt(pmic_arb, i) == 0)
+						handled++;
+				}
+			}
+		}
+	}
+
 	if (handled == 0)
 		handle_bad_irq(desc);
 
-- 
2.7.4


^ permalink raw reply	[flat|nested] 20+ messages in thread

* [RESEND PATCH v3 05/10] spmi: pmic-arb: correct duplicate APID to PPID mapping logic
  2021-12-02  0:00 [RESEND PATCH v3 00/10] A bunch of fix and optimization patches in spmi-pmic-arb.c Fenglin Wu
                   ` (3 preceding siblings ...)
  2021-12-02  0:00 ` [RESEND PATCH v3 04/10] spmi: pmic-arb: add support to dispatch interrupt based on IRQ status Fenglin Wu
@ 2021-12-02  0:00 ` Fenglin Wu
  2021-12-02  0:00 ` [RESEND PATCH v3 06/10] spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes Fenglin Wu
                   ` (4 subsequent siblings)
  9 siblings, 0 replies; 20+ messages in thread
From: Fenglin Wu @ 2021-12-02  0:00 UTC (permalink / raw)
  To: linux-arm-msm, linux-kernel, sboyd, Greg Kroah-Hartman,
	Kiran Gunda, David Collins
  Cc: subbaram, quic_fenglinw, tglx, maz

From: David Collins <collinsd@codeaurora.org>

Correct the way that duplicate PPID mappings are handled for PMIC
arbiter v5.  The final APID mapped to a given PPID should be the
one which has write owner = APPS EE, if it exists, or if not
that, then the first APID mapped to the PPID, if it exists.

Fixes: 40f318f0ed67 ("spmi: pmic-arb: add support for HW version 5")
Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
---
 drivers/spmi/spmi-pmic-arb.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
index 127a427..011044e 100644
--- a/drivers/spmi/spmi-pmic-arb.c
+++ b/drivers/spmi/spmi-pmic-arb.c
@@ -925,7 +925,8 @@ static int pmic_arb_read_apid_map_v5(struct spmi_pmic_arb *pmic_arb)
 	 * version 5, there is more than one APID mapped to each PPID.
 	 * The owner field for each of these mappings specifies the EE which is
 	 * allowed to write to the APID.  The owner of the last (highest) APID
-	 * for a given PPID will receive interrupts from the PPID.
+	 * which has the IRQ owner bit set for a given PPID will receive
+	 * interrupts from the PPID.
 	 */
 	for (i = 0; ; i++, apidd++) {
 		offset = pmic_arb->ver_ops->apid_map_offset(i);
@@ -948,16 +949,16 @@ static int pmic_arb_read_apid_map_v5(struct spmi_pmic_arb *pmic_arb)
 		apid = pmic_arb->ppid_to_apid[ppid] & ~PMIC_ARB_APID_VALID;
 		prev_apidd = &pmic_arb->apid_data[apid];
 
-		if (valid && is_irq_ee &&
-				prev_apidd->write_ee == pmic_arb->ee) {
+		if (!valid || apidd->write_ee == pmic_arb->ee) {
+			/* First PPID mapping or one for this EE */
+			pmic_arb->ppid_to_apid[ppid] = i | PMIC_ARB_APID_VALID;
+		} else if (valid && is_irq_ee &&
+			   prev_apidd->write_ee == pmic_arb->ee) {
 			/*
 			 * Duplicate PPID mapping after the one for this EE;
 			 * override the irq owner
 			 */
 			prev_apidd->irq_ee = apidd->irq_ee;
-		} else if (!valid || is_irq_ee) {
-			/* First PPID mapping or duplicate for another EE */
-			pmic_arb->ppid_to_apid[ppid] = i | PMIC_ARB_APID_VALID;
 		}
 
 		apidd->ppid = ppid;
-- 
2.7.4


^ permalink raw reply	[flat|nested] 20+ messages in thread

* [RESEND PATCH v3 06/10] spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
  2021-12-02  0:00 [RESEND PATCH v3 00/10] A bunch of fix and optimization patches in spmi-pmic-arb.c Fenglin Wu
                   ` (4 preceding siblings ...)
  2021-12-02  0:00 ` [RESEND PATCH v3 05/10] spmi: pmic-arb: correct duplicate APID to PPID mapping logic Fenglin Wu
@ 2021-12-02  0:00 ` Fenglin Wu
  2021-12-02  0:00 ` [RESEND PATCH v3 07/10] bindings: spmi: spmi-pmic-arb: mark interrupt properties as optional Fenglin Wu
                   ` (3 subsequent siblings)
  9 siblings, 0 replies; 20+ messages in thread
From: Fenglin Wu @ 2021-12-02  0:00 UTC (permalink / raw)
  To: linux-arm-msm, linux-kernel, sboyd
  Cc: collinsd, subbaram, quic_fenglinw, tglx, maz

From: David Collins <collinsd@codeaurora.org>

The system crashes due to an access permission violation when
writing to a PMIC peripheral which is not owned by the current
ee.  Add a check for PMIC arbiter version 5 for such invalid
write requests and return an error instead of crashing the
system.

Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
---
 drivers/spmi/spmi-pmic-arb.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
index 011044e..e83342a 100644
--- a/drivers/spmi/spmi-pmic-arb.c
+++ b/drivers/spmi/spmi-pmic-arb.c
@@ -1027,6 +1027,11 @@ static int pmic_arb_offset_v5(struct spmi_pmic_arb *pmic_arb, u8 sid, u16 addr,
 		offset = 0x10000 * pmic_arb->ee + 0x80 * apid;
 		break;
 	case PMIC_ARB_CHANNEL_RW:
+		if (pmic_arb->apid_data[apid].write_ee != pmic_arb->ee) {
+			dev_err(&pmic_arb->spmic->dev, "disallowed SPMI write to sid=%u, addr=0x%04X\n",
+				sid, addr);
+			return -EPERM;
+		}
 		offset = 0x10000 * apid;
 		break;
 	}
-- 
2.7.4


^ permalink raw reply	[flat|nested] 20+ messages in thread

* [RESEND PATCH v3 07/10] bindings: spmi: spmi-pmic-arb: mark interrupt properties as optional
  2021-12-02  0:00 [RESEND PATCH v3 00/10] A bunch of fix and optimization patches in spmi-pmic-arb.c Fenglin Wu
                   ` (5 preceding siblings ...)
  2021-12-02  0:00 ` [RESEND PATCH v3 06/10] spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes Fenglin Wu
@ 2021-12-02  0:00 ` Fenglin Wu
  2021-12-10 22:10   ` Rob Herring
  2021-12-02  0:00 ` [RESEND PATCH v3 08/10] spmi: pmic-arb: make interrupt support optional Fenglin Wu
                   ` (2 subsequent siblings)
  9 siblings, 1 reply; 20+ messages in thread
From: Fenglin Wu @ 2021-12-02  0:00 UTC (permalink / raw)
  To: linux-arm-msm, linux-kernel, sboyd, Andy Gross, Bjorn Andersson,
	Rob Herring, devicetree
  Cc: collinsd, subbaram, quic_fenglinw, tglx, maz

From: David Collins <collinsd@codeaurora.org>

Mark all interrupt related properties as optional instead of
required.  Some boards do not required PMIC IRQ support and it
isn't needed to handle SPMI bus transactions, so specify it as
optional.

Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
---
 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
index ca645e2..6332507 100644
--- a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
+++ b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
@@ -29,6 +29,8 @@ Required properties:
 - #size-cells : must be set to 0
 - qcom,ee : indicates the active Execution Environment identifier (0-5)
 - qcom,channel : which of the PMIC Arb provided channels to use for accesses (0-5)
+
+Optional properties:
 - interrupts : interrupt list for the PMIC Arb controller, must contain a
                single interrupt entry for the peripheral interrupt
 - interrupt-names : corresponding interrupt names for the interrupts
-- 
2.7.4


^ permalink raw reply	[flat|nested] 20+ messages in thread

* [RESEND PATCH v3 08/10] spmi: pmic-arb: make interrupt support optional
  2021-12-02  0:00 [RESEND PATCH v3 00/10] A bunch of fix and optimization patches in spmi-pmic-arb.c Fenglin Wu
                   ` (6 preceding siblings ...)
  2021-12-02  0:00 ` [RESEND PATCH v3 07/10] bindings: spmi: spmi-pmic-arb: mark interrupt properties as optional Fenglin Wu
@ 2021-12-02  0:00 ` Fenglin Wu
  2021-12-02  0:00 ` [RESEND PATCH v3 09/10] spmi: pmic-arb: increase SPMI transaction timeout delay Fenglin Wu
  2021-12-02  0:00 ` [RESEND PATCH v3 10/10] dt-bindings: convert qcom,spmi-pmic-arb binding to YAML format Fenglin Wu
  9 siblings, 0 replies; 20+ messages in thread
From: Fenglin Wu @ 2021-12-02  0:00 UTC (permalink / raw)
  To: linux-arm-msm, linux-kernel, sboyd
  Cc: collinsd, subbaram, quic_fenglinw, tglx, maz

From: David Collins <collinsd@codeaurora.org>

Make the support of PMIC peripheral interrupts optional for
spmi-pmic-arb devices.  This is useful in situations where
SPMI address mapping is required without the need for IRQ
support.

Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
---
 drivers/spmi/spmi-pmic-arb.c | 45 +++++++++++++++++++++++++++-----------------
 1 file changed, 28 insertions(+), 17 deletions(-)

diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
index e83342a..5e8dec1 100644
--- a/drivers/spmi/spmi-pmic-arb.c
+++ b/drivers/spmi/spmi-pmic-arb.c
@@ -1280,10 +1280,12 @@ static int spmi_pmic_arb_probe(struct platform_device *pdev)
 		goto err_put_ctrl;
 	}
 
-	pmic_arb->irq = platform_get_irq_byname(pdev, "periph_irq");
-	if (pmic_arb->irq < 0) {
-		err = pmic_arb->irq;
-		goto err_put_ctrl;
+	if (of_find_property(pdev->dev.of_node, "interrupt-controller", NULL)) {
+		pmic_arb->irq = platform_get_irq_byname(pdev, "periph_irq");
+		if (pmic_arb->irq < 0) {
+			err = pmic_arb->irq;
+			goto err_put_ctrl;
+		}
 	}
 
 	err = of_property_read_u32(pdev->dev.of_node, "qcom,channel", &channel);
@@ -1343,17 +1345,22 @@ static int spmi_pmic_arb_probe(struct platform_device *pdev)
 		}
 	}
 
-	dev_dbg(&pdev->dev, "adding irq domain\n");
-	pmic_arb->domain = irq_domain_add_tree(pdev->dev.of_node,
-					 &pmic_arb_irq_domain_ops, pmic_arb);
-	if (!pmic_arb->domain) {
-		dev_err(&pdev->dev, "unable to create irq_domain\n");
-		err = -ENOMEM;
-		goto err_put_ctrl;
+	if (pmic_arb->irq > 0) {
+		dev_dbg(&pdev->dev, "adding irq domain\n");
+		pmic_arb->domain = irq_domain_add_tree(pdev->dev.of_node,
+					    &pmic_arb_irq_domain_ops, pmic_arb);
+		if (!pmic_arb->domain) {
+			dev_err(&pdev->dev, "unable to create irq_domain\n");
+			err = -ENOMEM;
+			goto err_put_ctrl;
+		}
+
+		irq_set_chained_handler_and_data(pmic_arb->irq,
+						pmic_arb_chained_irq, pmic_arb);
+	} else {
+		dev_dbg(&pdev->dev, "not supporting PMIC interrupts\n");
 	}
 
-	irq_set_chained_handler_and_data(pmic_arb->irq, pmic_arb_chained_irq,
-					pmic_arb);
 	err = spmi_controller_add(ctrl);
 	if (err)
 		goto err_domain_remove;
@@ -1361,8 +1368,10 @@ static int spmi_pmic_arb_probe(struct platform_device *pdev)
 	return 0;
 
 err_domain_remove:
-	irq_set_chained_handler_and_data(pmic_arb->irq, NULL, NULL);
-	irq_domain_remove(pmic_arb->domain);
+	if (pmic_arb->irq > 0) {
+		irq_set_chained_handler_and_data(pmic_arb->irq, NULL, NULL);
+		irq_domain_remove(pmic_arb->domain);
+	}
 err_put_ctrl:
 	spmi_controller_put(ctrl);
 	return err;
@@ -1373,8 +1382,10 @@ static int spmi_pmic_arb_remove(struct platform_device *pdev)
 	struct spmi_controller *ctrl = platform_get_drvdata(pdev);
 	struct spmi_pmic_arb *pmic_arb = spmi_controller_get_drvdata(ctrl);
 	spmi_controller_remove(ctrl);
-	irq_set_chained_handler_and_data(pmic_arb->irq, NULL, NULL);
-	irq_domain_remove(pmic_arb->domain);
+	if (pmic_arb->irq > 0) {
+		irq_set_chained_handler_and_data(pmic_arb->irq, NULL, NULL);
+		irq_domain_remove(pmic_arb->domain);
+	}
 	spmi_controller_put(ctrl);
 	return 0;
 }
-- 
2.7.4


^ permalink raw reply	[flat|nested] 20+ messages in thread

* [RESEND PATCH v3 09/10] spmi: pmic-arb: increase SPMI transaction timeout delay
  2021-12-02  0:00 [RESEND PATCH v3 00/10] A bunch of fix and optimization patches in spmi-pmic-arb.c Fenglin Wu
                   ` (7 preceding siblings ...)
  2021-12-02  0:00 ` [RESEND PATCH v3 08/10] spmi: pmic-arb: make interrupt support optional Fenglin Wu
@ 2021-12-02  0:00 ` Fenglin Wu
  2021-12-02  0:00 ` [RESEND PATCH v3 10/10] dt-bindings: convert qcom,spmi-pmic-arb binding to YAML format Fenglin Wu
  9 siblings, 0 replies; 20+ messages in thread
From: Fenglin Wu @ 2021-12-02  0:00 UTC (permalink / raw)
  To: linux-arm-msm, linux-kernel, sboyd
  Cc: collinsd, subbaram, quic_fenglinw, tglx, maz

From: David Collins <collinsd@codeaurora.org>

Increase the SPMI transaction timeout delay from 100 us to
1000 us in order to account for the slower execution time
found on some simulator targets.

Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
---
 drivers/spmi/spmi-pmic-arb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
index 5e8dec1..a4d2b09 100644
--- a/drivers/spmi/spmi-pmic-arb.c
+++ b/drivers/spmi/spmi-pmic-arb.c
@@ -91,7 +91,7 @@ enum pmic_arb_channel {
 
 /* Maximum number of support PMIC peripherals */
 #define PMIC_ARB_MAX_PERIPHS		512
-#define PMIC_ARB_TIMEOUT_US		100
+#define PMIC_ARB_TIMEOUT_US		1000
 #define PMIC_ARB_MAX_TRANS_BYTES	(8)
 
 #define PMIC_ARB_APID_MASK		0xFF
-- 
2.7.4


^ permalink raw reply	[flat|nested] 20+ messages in thread

* [RESEND PATCH v3 10/10] dt-bindings: convert qcom,spmi-pmic-arb binding to YAML format
  2021-12-02  0:00 [RESEND PATCH v3 00/10] A bunch of fix and optimization patches in spmi-pmic-arb.c Fenglin Wu
                   ` (8 preceding siblings ...)
  2021-12-02  0:00 ` [RESEND PATCH v3 09/10] spmi: pmic-arb: increase SPMI transaction timeout delay Fenglin Wu
@ 2021-12-02  0:00 ` Fenglin Wu
  2021-12-02 13:58   ` Rob Herring
  2021-12-10 22:12   ` Rob Herring
  9 siblings, 2 replies; 20+ messages in thread
From: Fenglin Wu @ 2021-12-02  0:00 UTC (permalink / raw)
  To: linux-arm-msm, linux-kernel, sboyd, Andy Gross, Bjorn Andersson,
	Rob Herring, Fenglin Wu, Subbaraman Narayanamurthy, devicetree
  Cc: collinsd, subbaram, tglx, maz

Convert the SPMI PMIC arbiter documentation to JSON/yaml. While at it,
update SPMI bus "reg" items constraint for SPMI PMIC arbiter to carry
it and update it with a smaller range.

Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
---
 .../bindings/spmi/qcom,spmi-pmic-arb.txt           |  67 -----------
 .../bindings/spmi/qcom,spmi-pmic-arb.yaml          | 128 +++++++++++++++++++++
 Documentation/devicetree/bindings/spmi/spmi.yaml   |   3 +-
 3 files changed, 130 insertions(+), 68 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
 create mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml

diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
deleted file mode 100644
index 6332507..0000000
--- a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-Qualcomm SPMI Controller (PMIC Arbiter)
-
-The SPMI PMIC Arbiter is found on Snapdragon chipsets.  It is an SPMI
-controller with wrapping arbitration logic to allow for multiple on-chip
-devices to control a single SPMI master.
-
-The PMIC Arbiter can also act as an interrupt controller, providing interrupts
-to slave devices.
-
-See Documentation/devicetree/bindings/spmi/spmi.yaml for the generic SPMI
-controller binding requirements for child nodes.
-
-See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
-generic interrupt controller binding documentation.
-
-Required properties:
-- compatible : should be "qcom,spmi-pmic-arb".
-- reg-names  : must contain:
-     "core" - core registers
-     "intr" - interrupt controller registers
-     "cnfg" - configuration registers
-   Registers used only for V2 PMIC Arbiter:
-     "chnls"  - tx-channel per virtual slave registers.
-     "obsrvr" - rx-channel (called observer) per virtual slave registers.
-
-- reg : address + size pairs describing the PMIC arb register sets; order must
-        correspond with the order of entries in reg-names
-- #address-cells : must be set to 2
-- #size-cells : must be set to 0
-- qcom,ee : indicates the active Execution Environment identifier (0-5)
-- qcom,channel : which of the PMIC Arb provided channels to use for accesses (0-5)
-
-Optional properties:
-- interrupts : interrupt list for the PMIC Arb controller, must contain a
-               single interrupt entry for the peripheral interrupt
-- interrupt-names : corresponding interrupt names for the interrupts
-                    listed in the 'interrupts' property, must contain:
-     "periph_irq" - summary interrupt for PMIC peripherals
-- interrupt-controller : boolean indicator that the PMIC arbiter is an interrupt controller
-- #interrupt-cells :  must be set to 4. Interrupts are specified as a 4-tuple:
-    cell 1: slave ID for the requested interrupt (0-15)
-    cell 2: peripheral ID for requested interrupt (0-255)
-    cell 3: the requested peripheral interrupt (0-7)
-    cell 4: interrupt flags indicating level-sense information, as defined in
-            dt-bindings/interrupt-controller/irq.h
-
-Example:
-
-	spmi {
-		compatible = "qcom,spmi-pmic-arb";
-		reg-names = "core", "intr", "cnfg";
-		reg = <0xfc4cf000 0x1000>,
-		      <0xfc4cb000 0x1000>,
-		      <0xfc4ca000 0x1000>;
-
-		interrupt-names = "periph_irq";
-		interrupts = <0 190 0>;
-
-		qcom,ee = <0>;
-		qcom,channel = <0>;
-
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		interrupt-controller;
-		#interrupt-cells = <4>;
-	};
diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
new file mode 100644
index 0000000..3f0bea2
--- /dev/null
+++ b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spmi/qcom,spmi-pmic-arb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SPMI PMIC Arbiter
+
+maintainers:
+  - Fenglin Wu <quic_fenglinw@quicinc.com>
+  - Subbaraman Narayanamurthy <quic_subbaram@quicinc.com>
+
+description: |
+  The SPMI PMIC Arbiter is found on Snapdragon chipsets. It is an SPMI
+  controller with wrapping arbitration logic to allow for multiple
+  on-chip devices to control a single SPMI master.
+
+  The PMIC Arbiter can also act as an interrupt controller, providing
+  interrupts to slave devices.
+
+  See Documentation/devicetree/bindings/spmi/spmi.yaml for the generic
+  SPMI controller binding requirements for child nodes.
+
+allOf:
+  - $ref: spmi.yaml#
+
+properties:
+  $nodename:
+    pattern: "^spmi@.*"
+
+  compatible:
+    const: qcom,spmi-pmic-arb
+
+  reg-names:
+    oneOf:
+      - items:
+          - const: core
+          - const: intr
+          - const: cnfg
+      - items:
+          - const: core
+          - const: intr
+          - const: cnfg
+          - const: chnls
+          - const: obsrvr
+
+  reg:
+    minItems: 3
+    maxItems: 5
+    description: |
+      Specifies base physical address and size of the registers in SPMI PMIC
+      Arbiter HW module, with the following order.
+        - SPMI PMIC arbiter core registers (core)
+        - SPMI PMIC arbiter interrupt controller registers (intr)
+        - SPMI PMIC arbiter configuration registers (cnfg)
+        - SPMI PMIC arbiter tx-channel per virtual slave registers (chnls)
+        - SPMI PMIC arbiter rx-channel per virtual slave registers (obsrvr).
+      Register for "chnls" and "obsrvr" are only applicable for PMIC arbiter
+      with HW version greater than V2.
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 0
+
+  interrupts:
+    description: The summary interrupt for the PMIC Arb controller.
+    maxItems: 1
+
+  interrupt-names:
+    const: periph_irq
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 4
+    description: |
+      Specifies the number of cells needed to encode any interrupt source.
+      The 1st cell is the slave ID for the requested interrupt, its valid
+      range is [0-15].
+      The 2nd cell is the  peripheral ID for requested interrupt, its valid
+      range is [0-255].
+      The 3rd cell is the requested peripheral interrupt, its valid range
+      is [0-7].
+      The 4th cell is interrupt flags indicating level-sense information,
+      as defined in dt-bindings/interrupt-controller/irq.h
+
+  qcom,ee:
+    description: the active Execution Environment identifier
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3, 4, 5]
+
+  qcom,channel:
+    description: which of the PMIC Arbiter provided channels to use for accesses
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3, 4, 5]
+
+required:
+  - compatible
+  - reg-names
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - qcom,ee
+  - qcom,channel
+
+additionalProperties: false
+
+examples:
+  - |
+    spmi@fc4cf000 {
+          compatible = "qcom,spmi-pmic-arb";
+          reg-names = "core", "intr", "cnfg";
+          reg = <0xfc4cf000 0x1000>,
+                <0xfc4cb000 0x1000>,
+                <0xfc4ca000 0x1000>;
+          interrupt-names = "periph_irq";
+          interrupts = <0 190 0>;
+          interrupt-controller;
+          #interrupt-cells = <4>;
+
+          qcom,ee = <0>;
+          qcom,channel = <0>;
+
+          #address-cells = <2>;
+          #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/spmi/spmi.yaml b/Documentation/devicetree/bindings/spmi/spmi.yaml
index 1d243fae..d7d9345 100644
--- a/Documentation/devicetree/bindings/spmi/spmi.yaml
+++ b/Documentation/devicetree/bindings/spmi/spmi.yaml
@@ -25,7 +25,8 @@ properties:
     pattern: "^spmi@.*"
 
   reg:
-    maxItems: 1
+    minItems: 1
+    maxItems: 5
 
   "#address-cells":
     const: 2
-- 
2.7.4


^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: [RESEND PATCH v3 01/10] spmi: pmic-arb: handle spurious interrupt
  2021-12-02  0:00 ` [RESEND PATCH v3 01/10] spmi: pmic-arb: handle spurious interrupt Fenglin Wu
@ 2021-12-02  2:39   ` Bryan O'Donoghue
  2021-12-02 12:43     ` Fenglin Wu
  0 siblings, 1 reply; 20+ messages in thread
From: Bryan O'Donoghue @ 2021-12-02  2:39 UTC (permalink / raw)
  To: Fenglin Wu, linux-arm-msm, linux-kernel, sboyd
  Cc: collinsd, subbaram, tglx, maz, Abhijeet Dharmapurikar

On 02/12/2021 00:00, Fenglin Wu wrote:
> Call handle_bad_irq() for handling spurious interrupt. While at it,
> add an error print in cleanup_irq() for any spurious interrupt which
> is fired but not having interrupt handler registered.

Being excruciatingly pedantic, I'd suggest breaking this up into two 
patches, one for the ratelimit one for the logical change to the irq 
handling flow.

> Signed-off-by: Abhijeet Dharmapurikar<adharmap@codeaurora.org>
> Signed-off-by: David Collins<collinsd@codeaurora.org>
> Signed-off-by: Fenglin Wu<quic_fenglinw@quicinc.com>
> ---
>   drivers/spmi/spmi-pmic-arb.c | 17 +++++++++++++----
>   1 file changed, 13 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
> index bbbd311..da629cc 100644
> --- a/drivers/spmi/spmi-pmic-arb.c
> +++ b/drivers/spmi/spmi-pmic-arb.c
> @@ -489,6 +489,8 @@ static void cleanup_irq(struct spmi_pmic_arb *pmic_arb, u16 apid, int id)
>   	u8 per = ppid & 0xFF;
>   	u8 irq_mask = BIT(id);
>   
> +	dev_err_ratelimited(&pmic_arb->spmic->dev, "%s apid=%d sid=0x%x per=0x%x irq=%d\n",
> +			__func__, apid, sid, per, id);
>   	writel_relaxed(irq_mask, pmic_arb->ver_ops->irq_clear(pmic_arb, apid));
>   
>   	if (pmic_arb_write_cmd(pmic_arb->spmic, SPMI_CMD_EXT_WRITEL, sid,
> @@ -502,10 +504,10 @@ static void cleanup_irq(struct spmi_pmic_arb *pmic_arb, u16 apid, int id)
>   				irq_mask, ppid);
>   }
>   
> -static void periph_interrupt(struct spmi_pmic_arb *pmic_arb, u16 apid)
> +static int periph_interrupt(struct spmi_pmic_arb *pmic_arb, u16 apid)
>   {
>   	unsigned int irq;
> -	u32 status, id;
> +	u32 status, id, handled = 0;

If handled were an int

>   	u8 sid = (pmic_arb->apid_data[apid].ppid >> 8) & 0xF;
>   	u8 per = pmic_arb->apid_data[apid].ppid & 0xFF;
>   
> @@ -520,7 +522,10 @@ static void periph_interrupt(struct spmi_pmic_arb *pmic_arb, u16 apid)
>   			continue;
>   		}
>   		generic_handle_irq(irq);
> +		handled++;
>   	}
> +
> +	return (handled) ? 0 : -EINVAL;
>   }

you could "return handled;" and then have

if (periph_interrupt(pmic_arb, apid))
     handled++;

later on

Its not important I suppose but please do at least break this up into 
two separate patches.

---
bod

^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: [RESEND PATCH v3 02/10] spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
  2021-12-02  0:00 ` [RESEND PATCH v3 02/10] spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq Fenglin Wu
@ 2021-12-02  2:39   ` Bryan O'Donoghue
  2021-12-02 12:52     ` Fenglin Wu
  0 siblings, 1 reply; 20+ messages in thread
From: Bryan O'Donoghue @ 2021-12-02  2:39 UTC (permalink / raw)
  To: Fenglin Wu, linux-arm-msm, linux-kernel, sboyd
  Cc: collinsd, subbaram, tglx, maz

On 02/12/2021 00:00, Fenglin Wu wrote:
> From: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
> 
> Currently, cleanup_irq() is invoked when a peripheral's interrupt
> fires and there is no mapping present in the interrupt domain of
> spmi interrupt controller.
> 
> The cleanup_irq clears the arbiter bit, clears the pmic interrupt
> and disables it at the pmic in that order. The last disable in
> cleanup_irq races with request_irq() in that it stomps over the
> enable issued by request_irq. Fix this by not writing to the pmic
> in cleanup_irq. The latched bit will be left set in the pmic,
> which will not send us more interrupts even if the enable bit
> stays enabled.
> 
> When a client wants to request an interrupt, use the activate
> callback on the irq_domain to clear latched bit. This ensures
> that the latched, if set due to the above changes in cleanup_irq
> or when the bootloader leaves it set, gets cleaned up, paving way
> for upcoming interrupts to trigger.
> 
> With this, there is a possibility of unwanted triggering of
> interrupt right after the latched bit is cleared - the interrupt
> may be left enabled too. To avoid that, clear the enable first
> followed by clearing the latched bit in the activate callback.
> 
> Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
> [collinsd@codeaurora.org: fix merge conflict]
> Signed-off-by: David Collins <collinsd@codeaurora.org>
> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
> ---
>   drivers/spmi/spmi-pmic-arb.c | 15 +++++----------
>   1 file changed, 5 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
> index da629cc..ce7ae99 100644
> --- a/drivers/spmi/spmi-pmic-arb.c
> +++ b/drivers/spmi/spmi-pmic-arb.c
> @@ -492,16 +492,6 @@ static void cleanup_irq(struct spmi_pmic_arb *pmic_arb, u16 apid, int id)
>   	dev_err_ratelimited(&pmic_arb->spmic->dev, "%s apid=%d sid=0x%x per=0x%x irq=%d\n",
>   			__func__, apid, sid, per, id);
>   	writel_relaxed(irq_mask, pmic_arb->ver_ops->irq_clear(pmic_arb, apid));
> -
> -	if (pmic_arb_write_cmd(pmic_arb->spmic, SPMI_CMD_EXT_WRITEL, sid,
> -			(per << 8) + QPNPINT_REG_LATCHED_CLR, &irq_mask, 1))
> -		dev_err_ratelimited(&pmic_arb->spmic->dev, "failed to ack irq_mask = 0x%x for ppid = %x\n",
> -				irq_mask, ppid);spmi: pmic-arb: cleanup unrequested irqs
> -
> -	if (pmic_arb_write_cmd(pmic_arb->spmic, SPMI_CMD_EXT_WRITEL, sid,
> -			       (per << 8) + QPNPINT_REG_EN_CLR, &irq_mask, 1))
> -		dev_err_ratelimited(&pmic_arb->spmic->dev, "failed to ack irq_mask = 0x%x for ppid = %x\n",
> -				irq_mask, ppid);
>   }
>   
>   static int periph_interrupt(struct spmi_pmic_arb *pmic_arb, u16 apid)
> @@ -674,6 +664,7 @@ static int qpnpint_irq_domain_activate(struct irq_domain *domain,
>   	u16 apid = hwirq_to_apid(d->hwirq);
>   	u16 sid = hwirq_to_sid(d->hwirq);
>   	u16 irq = hwirq_to_irq(d->hwirq);
> +	u8 buf;
>   
>   	if (pmic_arb->apid_data[apid].irq_ee != pmic_arb->ee) {
>   		dev_err(&pmic_arb->spmic->dev, "failed to xlate sid = %#x, periph = %#x, irq = %u: ee=%u but owner=%u\n",
> @@ -682,6 +673,10 @@ static int qpnpint_irq_domain_activate(struct irq_domain *domain,
>   		return -ENODEV;
>   	}
>   
> +	buf = BIT(irq);
> +	qpnpint_spmi_write(d, QPNPINT_REG_EN_CLR, &buf, 1);
> +	qpnpint_spmi_write(d, QPNPINT_REG_LATCHED_CLR, &buf, 1);
> +
>   	return 0;
>   }
>   
> 

Shouldn't this have a

Fixes: 6bc546e71e50 ("spmi: pmic-arb: cleanup unrequested irqs")
Fixes: 02abec3616c1 ("spmi: pmic-arb: rename pa_xx to pmic_arb_xx and 
other cleanup")

so we know to backport as necessary

---
bod


^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: [RESEND PATCH v3 01/10] spmi: pmic-arb: handle spurious interrupt
  2021-12-02  2:39   ` Bryan O'Donoghue
@ 2021-12-02 12:43     ` Fenglin Wu
  0 siblings, 0 replies; 20+ messages in thread
From: Fenglin Wu @ 2021-12-02 12:43 UTC (permalink / raw)
  To: Bryan O'Donoghue, linux-arm-msm, linux-kernel, sboyd
  Cc: collinsd, subbaram, tglx, maz, Abhijeet Dharmapurikar


On 2021/12/2 10:39, Bryan O'Donoghue wrote:
> On 02/12/2021 00:00, Fenglin Wu wrote:
>> Call handle_bad_irq() for handling spurious interrupt. While at it,
>> add an error print in cleanup_irq() for any spurious interrupt which
>> is fired but not having interrupt handler registered.
>
> Being excruciatingly pedantic, I'd suggest breaking this up into two 
> patches, one for the ratelimit one for the logical change to the irq 
> handling flow.
>
The original patch actually only prints a message for any interrupt 
that's fired but not
registered, and it got reviewed and commented to add logic to handle 
spurious interrupt
like this.I might have misunderstood the comments so I combined them 
together, I agreed
theyare not very related and I can separate them and send them again.
Thanks.
>> Signed-off-by: Abhijeet Dharmapurikar<adharmap@codeaurora.org>
>> Signed-off-by: David Collins<collinsd@codeaurora.org>
>> Signed-off-by: Fenglin Wu<quic_fenglinw@quicinc.com>
>> ---
>>   drivers/spmi/spmi-pmic-arb.c | 17 +++++++++++++----
>>   1 file changed, 13 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
>> index bbbd311..da629cc 100644
>> --- a/drivers/spmi/spmi-pmic-arb.c
>> +++ b/drivers/spmi/spmi-pmic-arb.c
>> @@ -489,6 +489,8 @@ static void cleanup_irq(struct spmi_pmic_arb 
>> *pmic_arb, u16 apid, int id)
>>       u8 per = ppid & 0xFF;
>>       u8 irq_mask = BIT(id);
>>   +    dev_err_ratelimited(&pmic_arb->spmic->dev, "%s apid=%d 
>> sid=0x%x per=0x%x irq=%d\n",
>> +            __func__, apid, sid, per, id);
>>       writel_relaxed(irq_mask, pmic_arb->ver_ops->irq_clear(pmic_arb, 
>> apid));
>>         if (pmic_arb_write_cmd(pmic_arb->spmic, SPMI_CMD_EXT_WRITEL, 
>> sid,
>> @@ -502,10 +504,10 @@ static void cleanup_irq(struct spmi_pmic_arb 
>> *pmic_arb, u16 apid, int id)
>>                   irq_mask, ppid);
>>   }
>>   -static void periph_interrupt(struct spmi_pmic_arb *pmic_arb, u16 
>> apid)
>> +static int periph_interrupt(struct spmi_pmic_arb *pmic_arb, u16 apid)
>>   {
>>       unsigned int irq;
>> -    u32 status, id;
>> +    u32 status, id, handled = 0;
>
> If handled were an int
>
>>       u8 sid = (pmic_arb->apid_data[apid].ppid >> 8) & 0xF;
>>       u8 per = pmic_arb->apid_data[apid].ppid & 0xFF;
>>   @@ -520,7 +522,10 @@ static void periph_interrupt(struct 
>> spmi_pmic_arb *pmic_arb, u16 apid)
>>               continue;
>>           }
>>           generic_handle_irq(irq);
>> +        handled++;
>>       }
>> +
>> +    return (handled) ? 0 : -EINVAL;
>>   }
>
> you could "return handled;" and then have
>
> if (periph_interrupt(pmic_arb, apid))
>     handled++;
>
> later on
>
> Its not important I suppose but please do at least break this up into 
> two separate patches.
>
Got it, will update it. Thanks
> ---
> bod

^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: [RESEND PATCH v3 02/10] spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
  2021-12-02  2:39   ` Bryan O'Donoghue
@ 2021-12-02 12:52     ` Fenglin Wu
  0 siblings, 0 replies; 20+ messages in thread
From: Fenglin Wu @ 2021-12-02 12:52 UTC (permalink / raw)
  To: Bryan O'Donoghue, linux-arm-msm, linux-kernel, sboyd
  Cc: collinsd, subbaram, tglx, maz


On 2021/12/2 10:39, Bryan O'Donoghue wrote:
> On 02/12/2021 00:00, Fenglin Wu wrote:
>> From: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
>>
>> Currently, cleanup_irq() is invoked when a peripheral's interrupt
>> fires and there is no mapping present in the interrupt domain of
>> spmi interrupt controller.
>>
>> The cleanup_irq clears the arbiter bit, clears the pmic interrupt
>> and disables it at the pmic in that order. The last disable in
>> cleanup_irq races with request_irq() in that it stomps over the
>> enable issued by request_irq. Fix this by not writing to the pmic
>> in cleanup_irq. The latched bit will be left set in the pmic,
>> which will not send us more interrupts even if the enable bit
>> stays enabled.
>>
>> When a client wants to request an interrupt, use the activate
>> callback on the irq_domain to clear latched bit. This ensures
>> that the latched, if set due to the above changes in cleanup_irq
>> or when the bootloader leaves it set, gets cleaned up, paving way
>> for upcoming interrupts to trigger.
>>
>> With this, there is a possibility of unwanted triggering of
>> interrupt right after the latched bit is cleared - the interrupt
>> may be left enabled too. To avoid that, clear the enable first
>> followed by clearing the latched bit in the activate callback.
>>
>> Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
>> [collinsd@codeaurora.org: fix merge conflict]
>> Signed-off-by: David Collins <collinsd@codeaurora.org>
>> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
>> ---
>>   drivers/spmi/spmi-pmic-arb.c | 15 +++++----------
>>   1 file changed, 5 insertions(+), 10 deletions(-)
>>
>> diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
>> index da629cc..ce7ae99 100644
>> --- a/drivers/spmi/spmi-pmic-arb.c
>> +++ b/drivers/spmi/spmi-pmic-arb.c
>> @@ -492,16 +492,6 @@ static void cleanup_irq(struct spmi_pmic_arb 
>> *pmic_arb, u16 apid, int id)
>>       dev_err_ratelimited(&pmic_arb->spmic->dev, "%s apid=%d sid=0x%x 
>> per=0x%x irq=%d\n",
>>               __func__, apid, sid, per, id);
>>       writel_relaxed(irq_mask, pmic_arb->ver_ops->irq_clear(pmic_arb, 
>> apid));
>> -
>> -    if (pmic_arb_write_cmd(pmic_arb->spmic, SPMI_CMD_EXT_WRITEL, sid,
>> -            (per << 8) + QPNPINT_REG_LATCHED_CLR, &irq_mask, 1))
>> -        dev_err_ratelimited(&pmic_arb->spmic->dev, "failed to ack 
>> irq_mask = 0x%x for ppid = %x\n",
>> -                irq_mask, ppid);spmi: pmic-arb: cleanup unrequested 
>> irqs
>> -
>> -    if (pmic_arb_write_cmd(pmic_arb->spmic, SPMI_CMD_EXT_WRITEL, sid,
>> -                   (per << 8) + QPNPINT_REG_EN_CLR, &irq_mask, 1))
>> -        dev_err_ratelimited(&pmic_arb->spmic->dev, "failed to ack 
>> irq_mask = 0x%x for ppid = %x\n",
>> -                irq_mask, ppid);
>>   }
>>     static int periph_interrupt(struct spmi_pmic_arb *pmic_arb, u16 
>> apid)
>> @@ -674,6 +664,7 @@ static int qpnpint_irq_domain_activate(struct 
>> irq_domain *domain,
>>       u16 apid = hwirq_to_apid(d->hwirq);
>>       u16 sid = hwirq_to_sid(d->hwirq);
>>       u16 irq = hwirq_to_irq(d->hwirq);
>> +    u8 buf;
>>         if (pmic_arb->apid_data[apid].irq_ee != pmic_arb->ee) {
>>           dev_err(&pmic_arb->spmic->dev, "failed to xlate sid = %#x, 
>> periph = %#x, irq = %u: ee=%u but owner=%u\n",
>> @@ -682,6 +673,10 @@ static int qpnpint_irq_domain_activate(struct 
>> irq_domain *domain,
>>           return -ENODEV;
>>       }
>>   +    buf = BIT(irq);
>> +    qpnpint_spmi_write(d, QPNPINT_REG_EN_CLR, &buf, 1);
>> +    qpnpint_spmi_write(d, QPNPINT_REG_LATCHED_CLR, &buf, 1);
>> +
>>       return 0;
>>   }
>>
>
> Shouldn't this have a
>
> Fixes: 6bc546e71e50 ("spmi: pmic-arb: cleanup unrequested irqs")
> Fixes: 02abec3616c1 ("spmi: pmic-arb: rename pa_xx to pmic_arb_xx and 
> other cleanup")
>
> so we know to backport as necessary
>
Got it, I will add the Fixes tag and send it again.

> ---
> bod
>

^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: [RESEND PATCH v3 10/10] dt-bindings: convert qcom,spmi-pmic-arb binding to YAML format
  2021-12-02  0:00 ` [RESEND PATCH v3 10/10] dt-bindings: convert qcom,spmi-pmic-arb binding to YAML format Fenglin Wu
@ 2021-12-02 13:58   ` Rob Herring
  2021-12-10  2:05     ` Stephen Boyd
  2021-12-10 22:12   ` Rob Herring
  1 sibling, 1 reply; 20+ messages in thread
From: Rob Herring @ 2021-12-02 13:58 UTC (permalink / raw)
  To: Fenglin Wu
  Cc: linux-kernel, Subbaraman Narayanamurthy, collinsd, Andy Gross,
	devicetree, linux-arm-msm, subbaram, tglx, maz, Rob Herring,
	Bjorn Andersson, sboyd

On Thu, 02 Dec 2021 08:00:12 +0800, Fenglin Wu wrote:
> Convert the SPMI PMIC arbiter documentation to JSON/yaml. While at it,
> update SPMI bus "reg" items constraint for SPMI PMIC arbiter to carry
> it and update it with a smaller range.
> 
> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
> ---
>  .../bindings/spmi/qcom,spmi-pmic-arb.txt           |  67 -----------
>  .../bindings/spmi/qcom,spmi-pmic-arb.yaml          | 128 +++++++++++++++++++++
>  Documentation/devicetree/bindings/spmi/spmi.yaml   |   3 +-
>  3 files changed, 130 insertions(+), 68 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
>  create mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
> 

Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.

Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.

Full log is available here: https://patchwork.ozlabs.org/patch/1562483


qcom,spmi@400f000: $nodename:0: 'qcom,spmi@400f000' does not match '^spmi@.*'
	arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml
	arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml
	arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml
	arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml
	arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml
	arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml
	arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-dora.dt.yaml
	arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-dora.dt.yaml
	arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-kagura.dt.yaml
	arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-kagura.dt.yaml
	arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-keyaki.dt.yaml
	arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-keyaki.dt.yaml
	arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dt.yaml
	arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dt.yaml
	arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dt.yaml
	arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dt.yaml
	arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dt.yaml
	arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dt.yaml
	arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dt.yaml
	arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dt.yaml
	arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dt.yaml
	arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dt.yaml

qcom,spmi@400f000: 'pmic@0', 'pmic@1', 'pmic@2', 'pmic@3' do not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml
	arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml
	arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-dora.dt.yaml
	arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-kagura.dt.yaml
	arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-keyaki.dt.yaml
	arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dt.yaml
	arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dt.yaml
	arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dt.yaml
	arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dt.yaml
	arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dt.yaml

qcom,spmi@400f000: reg-names: 'oneOf' conditional failed, one must be fixed:
	arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml
	arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml
	arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml
	arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-dora.dt.yaml
	arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-kagura.dt.yaml
	arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-keyaki.dt.yaml
	arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dt.yaml
	arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dt.yaml
	arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dt.yaml
	arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dt.yaml
	arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dt.yaml

qcom,spmi@c440000: $nodename:0: 'qcom,spmi@c440000' does not match '^spmi@.*'
	arch/arm/boot/dts/qcom-sdx55-mtp.dt.yaml
	arch/arm/boot/dts/qcom-sdx55-mtp.dt.yaml
	arch/arm/boot/dts/qcom-sdx55-t55.dt.yaml
	arch/arm/boot/dts/qcom-sdx55-t55.dt.yaml
	arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dt.yaml
	arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dt.yaml

qcom,spmi@c440000: 'cell-index', 'pmic@2', 'pmic@3', 'pmic@8', 'pmic@9' do not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/qcom-sdx55-mtp.dt.yaml

qcom,spmi@c440000: 'cell-index', 'pmic@8', 'pmic@9' do not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/qcom-sdx55-t55.dt.yaml
	arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dt.yaml

qcom,spmi@c440000: reg-names: 'oneOf' conditional failed, one must be fixed:
	arch/arm/boot/dts/qcom-sdx55-mtp.dt.yaml
	arch/arm/boot/dts/qcom-sdx55-t55.dt.yaml
	arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dt.yaml

spmi@1c40000: 'cell-index' does not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dt.yaml

spmi@1c40000: reg-names: 'oneOf' conditional failed, one must be fixed:
	arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dt.yaml

spmi@200f000: 'cell-index' does not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml
	arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dt.yaml
	arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dt.yaml

spmi@200f000: 'pmic@0', 'pmic@1' do not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dt.yaml
	arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dt.yaml

spmi@200f000: 'pms405@0', 'pms405@1' do not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/qcs404-evb-1000.dt.yaml
	arch/arm64/boot/dts/qcom/qcs404-evb-4000.dt.yaml

spmi@200f000: reg-names: 'oneOf' conditional failed, one must be fixed:
	arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml
	arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml
	arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dt.yaml
	arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dt.yaml
	arch/arm64/boot/dts/qcom/qcs404-evb-1000.dt.yaml
	arch/arm64/boot/dts/qcom/qcs404-evb-4000.dt.yaml
	arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dt.yaml

spmi@800f000: 'cell-index' does not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dt.yaml

spmi@800f000: 'cell-index', 'pmic@0', 'pmic@1', 'pmic@2', 'pmic@3' do not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dt.yaml
	arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dt.yaml
	arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dt.yaml
	arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dt.yaml
	arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dt.yaml

spmi@800f000: 'cell-index', 'pmic@0', 'pmic@1', 'pmic@2', 'pmic@3', 'pmic@4', 'pmic@5' do not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dt.yaml
	arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml
	arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dt.yaml
	arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dt.yaml
	arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dt.yaml
	arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dt.yaml
	arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dt.yaml

spmi@800f000: 'cell-index', 'pmic@0', 'pmic@1', 'pmic@4', 'pmic@5' do not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dt.yaml
	arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml
	arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dt.yaml

spmi@800f000: reg-names: 'oneOf' conditional failed, one must be fixed:
	arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dt.yaml
	arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dt.yaml
	arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml
	arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dt.yaml
	arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml
	arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dt.yaml
	arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dt.yaml
	arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dt.yaml
	arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dt.yaml
	arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dt.yaml
	arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dt.yaml
	arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dt.yaml
	arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dt.yaml
	arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dt.yaml
	arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dt.yaml
	arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dt.yaml

spmi@c440000: #address-cells:0:0: 2 was expected
	arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-r1-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-r1-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-r1-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7280-herobrine.dt.yaml
	arch/arm64/boot/dts/qcom/sc7280-herobrine.dt.yaml
	arch/arm64/boot/dts/qcom/sc7280-herobrine.dt.yaml
	arch/arm64/boot/dts/qcom/sc7280-idp2.dt.yaml
	arch/arm64/boot/dts/qcom/sc7280-idp2.dt.yaml
	arch/arm64/boot/dts/qcom/sc7280-idp2.dt.yaml
	arch/arm64/boot/dts/qcom/sc7280-idp.dt.yaml
	arch/arm64/boot/dts/qcom/sc7280-idp.dt.yaml
	arch/arm64/boot/dts/qcom/sc7280-idp.dt.yaml

spmi@c440000: 'cell-index' does not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/sdm845-mtp.dt.yaml

spmi@c440000: 'cell-index', 'pmic@0', 'pmic@1' do not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dt.yaml

spmi@c440000: 'cell-index', 'pmic@0', 'pmic@1', 'pmic@2', 'pmic@3' do not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/sdm845-db845c.dt.yaml
	arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dt.yaml
	arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml
	arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dt.yaml

spmi@c440000: 'cell-index', 'pmic@0', 'pmic@1', 'pmic@2', 'pmic@3', 'pmic@4', 'pmic@5' do not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/sm8150-hdk.dt.yaml
	arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dt.yaml
	arch/arm64/boot/dts/qcom/sm8150-mtp.dt.yaml
	arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dt.yaml
	arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dt.yaml

spmi@c440000: 'cell-index', 'pmic@0', 'pmic@1', 'pmic@4', 'pmic@5' do not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/sa8155p-adp.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-r1-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dt.yaml
	arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dt.yaml
	arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dt.yaml

spmi@c440000: 'pmic@0', 'pmic@1' do not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dt.yaml

spmi@c440000: 'pmic@0', 'pmic@1', 'pmic@2' do not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/sc7280-herobrine.dt.yaml
	arch/arm64/boot/dts/qcom/sc7280-idp2.dt.yaml

spmi@c440000: 'pmic@0', 'pmic@1', 'pmic@2', 'pmic@3', 'pmic@4', 'pmic@5' do not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/qrb5165-rb5.dt.yaml
	arch/arm64/boot/dts/qcom/sm8250-hdk.dt.yaml
	arch/arm64/boot/dts/qcom/sm8350-mtp.dt.yaml

spmi@c440000: 'pmic@0', 'pmic@1', 'pmic@2', 'pmic@3', 'pmic@4', 'pmic@5', 'pmic@a', 'pmic@b' do not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/sm8250-mtp.dt.yaml
	arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dt.yaml
	arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dt.yaml

spmi@c440000: 'pmic@0', 'pmic@1', 'pmic@2', 'pmic@4' do not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/sc7280-idp.dt.yaml

spmi@c440000: reg-names: 'oneOf' conditional failed, one must be fixed:
	arch/arm64/boot/dts/qcom/qrb5165-rb5.dt.yaml
	arch/arm64/boot/dts/qcom/sa8155p-adp.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-r1-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7280-herobrine.dt.yaml
	arch/arm64/boot/dts/qcom/sc7280-idp2.dt.yaml
	arch/arm64/boot/dts/qcom/sc7280-idp.dt.yaml
	arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dt.yaml
	arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dt.yaml
	arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dt.yaml
	arch/arm64/boot/dts/qcom/sdm845-db845c.dt.yaml
	arch/arm64/boot/dts/qcom/sdm845-mtp.dt.yaml
	arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dt.yaml
	arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml
	arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dt.yaml
	arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dt.yaml
	arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dt.yaml
	arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dt.yaml
	arch/arm64/boot/dts/qcom/sm8150-hdk.dt.yaml
	arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dt.yaml
	arch/arm64/boot/dts/qcom/sm8150-mtp.dt.yaml
	arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dt.yaml
	arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dt.yaml
	arch/arm64/boot/dts/qcom/sm8250-hdk.dt.yaml
	arch/arm64/boot/dts/qcom/sm8250-mtp.dt.yaml
	arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dt.yaml
	arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dt.yaml
	arch/arm64/boot/dts/qcom/sm8350-hdk.dt.yaml
	arch/arm64/boot/dts/qcom/sm8350-mtp.dt.yaml

spmi@c440000: #size-cells:0:0: 0 was expected
	arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-r1-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-r1-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7180-trogdor-r1-lte.dt.yaml
	arch/arm64/boot/dts/qcom/sc7280-herobrine.dt.yaml
	arch/arm64/boot/dts/qcom/sc7280-herobrine.dt.yaml
	arch/arm64/boot/dts/qcom/sc7280-herobrine.dt.yaml
	arch/arm64/boot/dts/qcom/sc7280-idp2.dt.yaml
	arch/arm64/boot/dts/qcom/sc7280-idp2.dt.yaml
	arch/arm64/boot/dts/qcom/sc7280-idp2.dt.yaml
	arch/arm64/boot/dts/qcom/sc7280-idp.dt.yaml
	arch/arm64/boot/dts/qcom/sc7280-idp.dt.yaml
	arch/arm64/boot/dts/qcom/sc7280-idp.dt.yaml

spmi@fc4c0000: 'pmic@0', 'pmic@1', 'pmic@2', 'pmic@3' do not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dt.yaml
	arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dt.yaml
	arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dt.yaml
	arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dt.yaml
	arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dt.yaml
	arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dt.yaml
	arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dt.yaml
	arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dt.yaml
	arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dt.yaml
	arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dt.yaml

spmi@fc4cf000: 'pm8226@0', 'pm8226@1' do not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/qcom-apq8026-lg-lenok.dt.yaml

spmi@fc4cf000: 'pm8841@4', 'pm8841@5', 'pm8941@0', 'pm8941@1' do not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/qcom-apq8074-dragonboard.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dt.yaml

spmi@fc4cf000: 'pma8084@0', 'pma8084@1' do not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/qcom-apq8084-ifc6540.dt.yaml
	arch/arm/boot/dts/qcom-apq8084-mtp.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-samsung-klte.dt.yaml


^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: [RESEND PATCH v3 10/10] dt-bindings: convert qcom,spmi-pmic-arb binding to YAML format
  2021-12-02 13:58   ` Rob Herring
@ 2021-12-10  2:05     ` Stephen Boyd
  2021-12-14  5:50       ` Fenglin Wu
  0 siblings, 1 reply; 20+ messages in thread
From: Stephen Boyd @ 2021-12-10  2:05 UTC (permalink / raw)
  To: Fenglin Wu, Rob Herring
  Cc: linux-kernel, Subbaraman Narayanamurthy, collinsd, Andy Gross,
	devicetree, linux-arm-msm, subbaram, tglx, maz, Rob Herring,
	Bjorn Andersson

Quoting Rob Herring (2021-12-02 05:58:09)
> On Thu, 02 Dec 2021 08:00:12 +0800, Fenglin Wu wrote:
> > Convert the SPMI PMIC arbiter documentation to JSON/yaml. While at it,
> > update SPMI bus "reg" items constraint for SPMI PMIC arbiter to carry
> > it and update it with a smaller range.
> > 
> > Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
> > ---
> >  .../bindings/spmi/qcom,spmi-pmic-arb.txt           |  67 -----------
> >  .../bindings/spmi/qcom,spmi-pmic-arb.yaml          | 128 +++++++++++++++++++++
> >  Documentation/devicetree/bindings/spmi/spmi.yaml   |   3 +-
> >  3 files changed, 130 insertions(+), 68 deletions(-)
> >  delete mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
> >  create mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
> > 
> 
> Running 'make dtbs_check' with the schema in this patch gives the
> following warnings. Consider if they are expected or the schema is
> incorrect. These may not be new warnings.
> 
> Note that it is not yet a requirement to have 0 warnings for dtbs_check.
> This will change in the future.
> 
> Full log is available here: https://patchwork.ozlabs.org/patch/1562483

Are any of these problems going to be fixed?

^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: [RESEND PATCH v3 07/10] bindings: spmi: spmi-pmic-arb: mark interrupt properties as optional
  2021-12-02  0:00 ` [RESEND PATCH v3 07/10] bindings: spmi: spmi-pmic-arb: mark interrupt properties as optional Fenglin Wu
@ 2021-12-10 22:10   ` Rob Herring
  0 siblings, 0 replies; 20+ messages in thread
From: Rob Herring @ 2021-12-10 22:10 UTC (permalink / raw)
  To: Fenglin Wu
  Cc: sboyd, devicetree, collinsd, Bjorn Andersson, Andy Gross,
	Rob Herring, linux-arm-msm, subbaram, maz, linux-kernel, tglx

On Thu, 02 Dec 2021 08:00:09 +0800, Fenglin Wu wrote:
> From: David Collins <collinsd@codeaurora.org>
> 
> Mark all interrupt related properties as optional instead of
> required.  Some boards do not required PMIC IRQ support and it
> isn't needed to handle SPMI bus transactions, so specify it as
> optional.
> 
> Signed-off-by: David Collins <collinsd@codeaurora.org>
> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
> ---
>  Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: [RESEND PATCH v3 10/10] dt-bindings: convert qcom,spmi-pmic-arb binding to YAML format
  2021-12-02  0:00 ` [RESEND PATCH v3 10/10] dt-bindings: convert qcom,spmi-pmic-arb binding to YAML format Fenglin Wu
  2021-12-02 13:58   ` Rob Herring
@ 2021-12-10 22:12   ` Rob Herring
  1 sibling, 0 replies; 20+ messages in thread
From: Rob Herring @ 2021-12-10 22:12 UTC (permalink / raw)
  To: Fenglin Wu
  Cc: linux-kernel, collinsd, Subbaraman Narayanamurthy, tglx,
	subbaram, sboyd, Rob Herring, Andy Gross, devicetree,
	Bjorn Andersson, maz, linux-arm-msm

On Thu, 02 Dec 2021 08:00:12 +0800, Fenglin Wu wrote:
> Convert the SPMI PMIC arbiter documentation to JSON/yaml. While at it,
> update SPMI bus "reg" items constraint for SPMI PMIC arbiter to carry
> it and update it with a smaller range.
> 
> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
> ---
>  .../bindings/spmi/qcom,spmi-pmic-arb.txt           |  67 -----------
>  .../bindings/spmi/qcom,spmi-pmic-arb.yaml          | 128 +++++++++++++++++++++
>  Documentation/devicetree/bindings/spmi/spmi.yaml   |   3 +-
>  3 files changed, 130 insertions(+), 68 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
>  create mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: [RESEND PATCH v3 10/10] dt-bindings: convert qcom,spmi-pmic-arb binding to YAML format
  2021-12-10  2:05     ` Stephen Boyd
@ 2021-12-14  5:50       ` Fenglin Wu
  0 siblings, 0 replies; 20+ messages in thread
From: Fenglin Wu @ 2021-12-14  5:50 UTC (permalink / raw)
  To: Stephen Boyd, Rob Herring
  Cc: linux-kernel, Subbaraman Narayanamurthy, collinsd, Andy Gross,
	devicetree, linux-arm-msm, subbaram, tglx, maz, Rob Herring,
	Bjorn Andersson

Sorry for late response. I had a check in the log and tried "make 
dtbs_check" at my side.
There are 5 types of warnings, I guess I can fix two types of them.

1) : qcom,spmi@400f000: 'pmic@0', 'pmic@1', 'pmic@2', 'pmic@3' do not 
match any of the regexes: 'pinctrl-[0-9]+'

This indicates the child nodes devices are not recognized, this can be 
fixed by adding pattern
properties similar to what defines in spmi.yaml. I will address it in 
next patchset.

2) qcom,spmi@400f000: reg-names: 'oneOf' conditional failed, one must be 
fixed:

This is because of the "items" defined in "reg-name" does not match 
between the dtsi nodes
and the schema in sequence wise. I will update the scheme for "reg-name" 
like this to fix it in
next patchset:
   reg-names:
     anyOf:
       - minItems: 3
       - maxItems: 3
       - enum: ["core", "intr", "cnfg"]

       - minItems: 5
       - maxItems: 5
       - enum: ["core", "intr", "cnfg", "chnls", "obsrvr"]

3) qcom,spmi@400f000: $nodename:0: 'qcom,spmi@400f000' does not match 
'^spmi@.*'

This indicates the mismatch of the device node name between the dtsi and 
schema, I guess
the fix should be in dtsi file instead of this binding, the spmi.yaml 
file has defined
the nodename with "spmi@" prefix, qcom,spmi-pmic-arb.yaml should follow 
this.
Should I make the change and update all the nodes names in dtsi file 
like this? Or can this
be ignored and leave it to dtsi file owners to update them accordingly?

4) spmi@c440000: #address-cells:0:0: 2 was expected
   spmi@c440000: #size-cells:0:0: 0 was expected

Some of the spmi device nodes specify #address-cell = < 1>, and 
#size-cell = <1>, the original
.txt binding specified #address-cell = < 2>, and #size-cell = <0>. The 
change should be in dtsi
to update them following the binding. Let me know if I should do this, 
or I can leave itto the
dtsi file owners to update them accordingly.

5) spmi@1c40000: 'cell-index' does not match any of the regexes: 
'pinctrl-[0-9]+'

"cell-index" is not used in the driver, also it doesn't exist in the 
.txt binding, so this should
be fixedin the corresponding dtsi file. Let me know if I need to fix it.

Thanks


On 2021/12/10 10:05, Stephen Boyd wrote:
> Quoting Rob Herring (2021-12-02 05:58:09)
>> On Thu, 02 Dec 2021 08:00:12 +0800, Fenglin Wu wrote:
>>> Convert the SPMI PMIC arbiter documentation to JSON/yaml. While at it,
>>> update SPMI bus "reg" items constraint for SPMI PMIC arbiter to carry
>>> it and update it with a smaller range.
>>>
>>> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
>>> ---
>>>   .../bindings/spmi/qcom,spmi-pmic-arb.txt           |  67 -----------
>>>   .../bindings/spmi/qcom,spmi-pmic-arb.yaml          | 128 +++++++++++++++++++++
>>>   Documentation/devicetree/bindings/spmi/spmi.yaml   |   3 +-
>>>   3 files changed, 130 insertions(+), 68 deletions(-)
>>>   delete mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
>>>   create mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
>>>
>> Running 'make dtbs_check' with the schema in this patch gives the
>> following warnings. Consider if they are expected or the schema is
>> incorrect. These may not be new warnings.
>>
>> Note that it is not yet a requirement to have 0 warnings for dtbs_check.
>> This will change in the future.
>>
>> Full log is available here: https://patchwork.ozlabs.org/patch/1562483
> Are any of these problems going to be fixed?

^ permalink raw reply	[flat|nested] 20+ messages in thread

end of thread, other threads:[~2021-12-14  5:50 UTC | newest]

Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-12-02  0:00 [RESEND PATCH v3 00/10] A bunch of fix and optimization patches in spmi-pmic-arb.c Fenglin Wu
2021-12-02  0:00 ` [RESEND PATCH v3 01/10] spmi: pmic-arb: handle spurious interrupt Fenglin Wu
2021-12-02  2:39   ` Bryan O'Donoghue
2021-12-02 12:43     ` Fenglin Wu
2021-12-02  0:00 ` [RESEND PATCH v3 02/10] spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq Fenglin Wu
2021-12-02  2:39   ` Bryan O'Donoghue
2021-12-02 12:52     ` Fenglin Wu
2021-12-02  0:00 ` [RESEND PATCH v3 03/10] spmi: pmic-arb: check apid against limits before calling irq handler Fenglin Wu
2021-12-02  0:00 ` [RESEND PATCH v3 04/10] spmi: pmic-arb: add support to dispatch interrupt based on IRQ status Fenglin Wu
2021-12-02  0:00 ` [RESEND PATCH v3 05/10] spmi: pmic-arb: correct duplicate APID to PPID mapping logic Fenglin Wu
2021-12-02  0:00 ` [RESEND PATCH v3 06/10] spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes Fenglin Wu
2021-12-02  0:00 ` [RESEND PATCH v3 07/10] bindings: spmi: spmi-pmic-arb: mark interrupt properties as optional Fenglin Wu
2021-12-10 22:10   ` Rob Herring
2021-12-02  0:00 ` [RESEND PATCH v3 08/10] spmi: pmic-arb: make interrupt support optional Fenglin Wu
2021-12-02  0:00 ` [RESEND PATCH v3 09/10] spmi: pmic-arb: increase SPMI transaction timeout delay Fenglin Wu
2021-12-02  0:00 ` [RESEND PATCH v3 10/10] dt-bindings: convert qcom,spmi-pmic-arb binding to YAML format Fenglin Wu
2021-12-02 13:58   ` Rob Herring
2021-12-10  2:05     ` Stephen Boyd
2021-12-14  5:50       ` Fenglin Wu
2021-12-10 22:12   ` Rob Herring

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).