LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Roger Quadros <rogerq@kernel.org>
To: Matthias Kaehlcke <mka@chromium.org>
Cc: "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	"Alan Stern" <stern@rowland.harvard.edu>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Frank Rowand" <frowand.list@gmail.com>,
	"Mathias Nyman" <mathias.nyman@intel.com>,
	"Felipe Balbi" <balbi@kernel.org>,
	"Bastien Nocera" <hadess@hadess.net>,
	"Peter Chen" <peter.chen@kernel.org>,
	devicetree@vger.kernel.org,
	"Michal Simek" <michal.simek@xilinx.com>,
	linux-kernel@vger.kernel.org,
	"Douglas Anderson" <dianders@chromium.org>,
	"Krzysztof Kozlowski" <krzk@kernel.org>,
	linux-usb@vger.kernel.org,
	"Ravi Chandra Sadineni" <ravisadineni@chromium.org>,
	"Stephen Boyd" <swboyd@chromium.org>,
	"Al Cooper" <alcooperx@gmail.com>,
	"Andrey Zhizhikin" <andrey.zhizhikin@leica-geosystems.com>,
	"Andy Gross" <agross@kernel.org>,
	"Aswath Govindraju" <a-govindraju@ti.com>,
	"Bjorn Andersson" <bjorn.andersson@linaro.org>,
	"Catalin Marinas" <catalin.marinas@arm.com>,
	"Dmitry Baryshkov" <dmitry.baryshkov@linaro.org>,
	"Dmitry Osipenko" <digetx@gmail.com>,
	"Enric Balletbo i Serra" <enric.balletbo@collabora.com>,
	"Fabio Estevam" <festevam@gmail.com>,
	"Guido Günther" <agx@sigxcpu.org>,
	"Jagan Teki" <jagan@amarulasolutions.com>,
	"Nishanth Menon" <nm@ti.com>,
	"Pawel Laszczak" <pawell@cadence.com>,
	"Shawn Guo" <shawnguo@kernel.org>,
	"Vinod Koul" <vkoul@kernel.org>, "Will Deacon" <will@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH v15 0/6] usb: misc: Add onboard_usb_hub driver
Date: Fri, 13 Aug 2021 09:35:53 +0300	[thread overview]
Message-ID: <166449bc-4c33-b923-f53d-6df4f83dc267@kernel.org> (raw)
In-Reply-To: <YRVVjwNprk7l1jUk@google.com>

Hi Matthias,

On 12/08/2021 20:08, Matthias Kaehlcke wrote:
> Hi Roger,
> 
> On Wed, Aug 11, 2021 at 03:56:15PM +0300, Roger Quadros wrote:
>>
>>
>> On 11/08/2021 15:38, Roger Quadros wrote:
>>> Hi Matthias,
>>>
>>> On 09/08/2021 18:49, Matthias Kaehlcke wrote:
>>>> Hi Greg,
>>>>
>>>> Just wanted to check if this series is still on your radar. Is
>>>> there anything that blocks it from landing (further ACKs, ...)?
>>>>
>>>> Thanks
>>>>
>>>> Matthias
>>>>
>>>> On Mon, Jul 26, 2021 at 05:41:12PM -0700, Matthias Kaehlcke wrote:
>>>>> This series adds:
>>>>> - the onboard_usb_hub_driver
>>>>> - glue in the xhci-plat driver to create and destroy the
>>>>>   onboard_usb_hub platform devices if needed
>>>>> - a device tree binding for the Realtek RTS5411 USB hub controller
>>>>> - device tree changes that add RTS5411 entries for the QCA SC7180
>>>>>   based boards trogdor and lazor
>>>>> - a couple of stubs for platform device functions to avoid
>>>>>   unresolved symbols with certain kernel configs
>>>>>
>>>>> The main issue the driver addresses is that a USB hub needs to be
>>>>> powered before it can be discovered. For discrete onboard hubs (an
>>>>> example for such a hub is the Realtek RTS5411) this is often solved
>>>>> by supplying the hub with an 'always-on' regulator, which is kind
>>>>> of a hack. Some onboard hubs may require further initialization
>>>>> steps, like changing the state of a GPIO or enabling a clock, which
>>>>> requires even more hacks. This driver creates a platform device
>>>>> representing the hub which performs the necessary initialization.
>>>>> Currently it only supports switching on a single regulator, support
>>>>> for multiple regulators or other actions can be added as needed.
>>>>> Different initialization sequences can be supported based on the
>>>>> compatible string.
>>>>>
>>>>> Besides performing the initialization the driver can be configured
>>>>> to power the hub off during system suspend. This can help to extend
>>>>> battery life on battery powered devices which have no requirements
>>>>> to keep the hub powered during suspend. The driver can also be
>>>>> configured to leave the hub powered when a wakeup capable USB device
>>>>> is connected when suspending, and power it off otherwise.
>>>>>
>>>>> Changes in v15:
>>>>> - adjusted dependencies of USB_DWC3_CORE to make sure it can only
>>>>>   be enabled when at least one of USB_DWC3_HOST, USB_DWC3_GADGET
>>>>>   or USB_DWC3_DUAL_ROLE is selectable
>>>>>
>>>>> Changes in v14:
>>>>> - rebased on top of v5.14-rc1
>>>>> - dropped DT binding patch which landed in v5.13
>>>>>
>>>>> Changes in v13:
>>>>> - added patch "usb: Specify dependency on USB_XHCI_PLATFORM with
>>>>>   'depends on'" to the series to avoid Kconfig conflicts
>>>>> - added patch "arm64: defconfig: Explicitly enable USB_XHCI_PLATFORM"
>>>>>   to the series to keep effective defconfig unchanged
>>>>>
>>>>> Changes in v12:
>>>>> - onboard_hub driver: use IS_ENABLED(CONFIG_USB_ONBOARD_HUB_MODULE)
>>>>>   in onboard_hub.h to also check for the driver built as module
>>>>> - onboard_hub_driver: include onboard_hub.h again to make sure there
>>>>>   are prototype declarations for the public functions
>>>>>
>>>>> Changes in v11:
>>>>> - support multiple onboard hubs connected to the same parent
>>>>> - don't include ‘onboard_hub.h’ from the onboard hub driver
>>>>>
>>>>> Changes in v10:
>>>>> - always use of_is_onboard_usb_hub() stub unless ONBOARD_USB_HUB=y/m
>>>>> - keep 'regulator-boot-on' property for pp3300_hub
>>>>>
>>>>> Changes in v9:
>>>>> - added dependency on ONBOARD_USB_HUB (or !!ONBOARD_USB_HUB) to
>>>>>   USB_PLATFORM_XHCI
>>>>>
>>>>> Changes in v7:
>>>>> - updated DT binding
>>>>> - series rebased on qcom/arm64-for-5.13
>>>>>
>>>>> Changes in v6:
>>>>> - updated summary
>>>>>
>>>>> Changes in v5:
>>>>> - cover letter added
>>>>>
>>>>> Matthias Kaehlcke (6):
>>>>>   usb: misc: Add onboard_usb_hub driver
>>>>>   of/platform: Add stubs for of_platform_device_create/destroy()
>>>>>   arm64: defconfig: Explicitly enable USB_XHCI_PLATFORM
>>>>>   usb: Specify dependencies on USB_XHCI_PLATFORM with 'depends on'
>>>>>   usb: host: xhci-plat: Create platform device for onboard hubs in
>>>>>     probe()
>>>>>   arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub
>>>>>
>>>>>  .../sysfs-bus-platform-onboard-usb-hub        |   8 +
>>>>>  MAINTAINERS                                   |   7 +
>>>>>  .../boot/dts/qcom/sc7180-trogdor-lazor-r0.dts |  19 +-
>>>>>  .../boot/dts/qcom/sc7180-trogdor-lazor-r1.dts |  12 +-
>>>>>  .../arm64/boot/dts/qcom/sc7180-trogdor-r1.dts |  19 +-
>>>>>  arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi  |  19 +-
>>>>>  arch/arm64/configs/defconfig                  |   1 +
>>>>>  drivers/usb/cdns3/Kconfig                     |   2 +-
>>>>>  drivers/usb/dwc3/Kconfig                      |   5 +-
>>>>>  drivers/usb/host/Kconfig                      |   5 +-
>>>
>>> These Kconfig changes are causing the resulting .config to be different.
>>> For example, if I start with omap2plus_defconfig, the resulting .config
>>> before and after your series is different as shown below
>>>
>>> :/work/linux$ diff /tmp/.config .config
>>> 1902d1901
>>> < # CONFIG_HISI_HIKEY_USB is not set
>>> 4992c4991
>>> < CONFIG_USB_XHCI_PLATFORM=m
>>> ---
>>>> # CONFIG_USB_XHCI_PLATFORM is not set
>>> 5073,5075c5072
>>> < # CONFIG_USB_DWC3_HOST is not set
>>> < # CONFIG_USB_DWC3_GADGET is not set
>>> < CONFIG_USB_DWC3_DUAL_ROLE=y
>>> ---
>>>> CONFIG_USB_DWC3_GADGET=y
>>> 5173a5171
>>>> # CONFIG_USB_ONBOARD_HUB is not set
>>> 5285c5283
>>> < CONFIG_USB_ROLE_SWITCH=m
>>> ---
>>>> # CONFIG_USB_ROLE_SWITCH is not set
>>>
>>> I would expect the same issues for multi_v7_defconfig and multi_v8_defconfig as well.
>>
>> Sorry I meant defconfig for arm64, not multi_v8_defconfig.
>>
>> I checked that for arm64 defconfig it is ok.
>>
>>> I'm ok to update the relevant defconfigs files so that the resulting .config is identical to
>>> before your series. Thanks!
>>
>> With the below patch you can fix it for omap2plus_defconfig and multi_v7_defconfig.
>>
>> diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
>> index d9abaae118dd..8c175ab37377 100644
>> --- a/arch/arm/configs/multi_v7_defconfig
>> +++ b/arch/arm/configs/multi_v7_defconfig
>> @@ -787,6 +787,7 @@ CONFIG_SND_AUDIO_GRAPH_CARD=m
>>  CONFIG_USB=y
>>  CONFIG_USB_OTG=y
>>  CONFIG_USB_XHCI_HCD=y
>> +CONFIG_USB_XHCI_PLATFORM=y
>>  CONFIG_USB_XHCI_MVEBU=y
>>  CONFIG_USB_XHCI_TEGRA=m
>>  CONFIG_USB_EHCI_HCD=y
>> diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
>> index 2ac2418084ab..a015fb04fa25 100644
>> --- a/arch/arm/configs/omap2plus_defconfig
>> +++ b/arch/arm/configs/omap2plus_defconfig
>> @@ -562,6 +562,7 @@ CONFIG_USB=m
>>  CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
>>  CONFIG_USB_MON=m
>>  CONFIG_USB_XHCI_HCD=m
>> +CONFIG_USB_XHCI_PLATFORM=m
>>  CONFIG_USB_EHCI_HCD=m
>>  CONFIG_USB_OHCI_HCD=m
>>  CONFIG_USB_ACM=m
> 
> Thanks for testing!
> 
> I completely forgot that arm32 has all these different defconfigs.
> 
> While trying to adjust qcom_defconfig I came across something that confuses
> me. The original defconfig results in:
> 
> # CONFIG_USB_XHCI_HCD is not set
> CONFIG_USB_DWC3_DUAL_ROLE=y

The original Kconfig was:

> config USB_DWC3_DUAL_ROLE
>         bool "Dual Role mode"
>         depends on ((USB=y || USB=USB_DWC3) && (USB_GADGET=y || USB_GADGET=USB_DWC3))
>         depends on (EXTCON=y || EXTCON=USB_DWC3)

Which means USB_DWC3_DUAL_ROLE can be enabled even without CONFIG_USB_XHCI_HCD.

All the dual role code does is add/remove the host/gadget controller platform devices.
It doesn't care whether there is a driver for it or not.
i.e. there is no build dependency on CONFIG_USB_XHCI_HCD.

> 
> My assumption was that xHCI support is need for dwc3 dual mode (which is
> made explicit by https://lore.kernel.org/patchwork/patch/1468240/), is
> that incorrect? Maybe without xHCI support the controller can still
> operate in USB 2.0 dual role mode?
> 

Without xHCI support the host functionality will not work at all on dwc3 dual role.
So I think your Kconfig changes for USB_DWC3_DUAL_ROLE to depend on USB_XHCI_PLATFORM
are correct.

cheers,
-roger

  reply	other threads:[~2021-08-13  6:36 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-27  0:41 Matthias Kaehlcke
2021-07-27  0:41 ` [PATCH v15 1/6] " Matthias Kaehlcke
2021-07-27  0:41 ` [PATCH v15 2/6] of/platform: Add stubs for of_platform_device_create/destroy() Matthias Kaehlcke
2021-07-27  0:41 ` [PATCH v15 3/6] arm64: defconfig: Explicitly enable USB_XHCI_PLATFORM Matthias Kaehlcke
2021-07-27  0:41 ` [PATCH v15 4/6] usb: Specify dependencies on USB_XHCI_PLATFORM with 'depends on' Matthias Kaehlcke
2021-07-27  0:41 ` [PATCH v15 5/6] usb: host: xhci-plat: Create platform device for onboard hubs in probe() Matthias Kaehlcke
2021-07-27  0:41 ` [PATCH v15 6/6] arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub Matthias Kaehlcke
2021-08-09 15:49 ` [PATCH v15 0/6] usb: misc: Add onboard_usb_hub driver Matthias Kaehlcke
2021-08-11 12:38   ` Roger Quadros
2021-08-11 12:56     ` Roger Quadros
2021-08-12 17:08       ` Matthias Kaehlcke
2021-08-13  6:35         ` Roger Quadros [this message]
2021-08-13 18:33           ` Matthias Kaehlcke
2021-10-19 16:24 ` Dmitry Baryshkov
2021-10-19 22:54   ` Matthias Kaehlcke

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=166449bc-4c33-b923-f53d-6df4f83dc267@kernel.org \
    --to=rogerq@kernel.org \
    --cc=a-govindraju@ti.com \
    --cc=agross@kernel.org \
    --cc=agx@sigxcpu.org \
    --cc=alcooperx@gmail.com \
    --cc=andrey.zhizhikin@leica-geosystems.com \
    --cc=balbi@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=catalin.marinas@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=digetx@gmail.com \
    --cc=dmitry.baryshkov@linaro.org \
    --cc=enric.balletbo@collabora.com \
    --cc=festevam@gmail.com \
    --cc=frowand.list@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=hadess@hadess.net \
    --cc=jagan@amarulasolutions.com \
    --cc=krzk@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mathias.nyman@intel.com \
    --cc=michal.simek@xilinx.com \
    --cc=mka@chromium.org \
    --cc=nm@ti.com \
    --cc=pawell@cadence.com \
    --cc=peter.chen@kernel.org \
    --cc=ravisadineni@chromium.org \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=stern@rowland.harvard.edu \
    --cc=swboyd@chromium.org \
    --cc=vkoul@kernel.org \
    --cc=will@kernel.org \
    --subject='Re: [PATCH v15 0/6] usb: misc: Add onboard_usb_hub driver' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).