LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* Linux 2.6.38-rc4
@ 2011-02-08  0:23 Linus Torvalds
  2011-02-08 10:17 ` lockdep: possible reason: unannotated irqs-off. (was: Re: Linux 2.6.38-rc4) Borislav Petkov
                   ` (6 more replies)
  0 siblings, 7 replies; 62+ messages in thread
From: Linus Torvalds @ 2011-02-08  0:23 UTC (permalink / raw)
  To: Linux Kernel Mailing List

No travel or cyclone-dodging this time, so as promised, the -rc's are
now back to the usual weekly schedule.

There's nothing much that stands out here. Some arch updates (arm and
powerpc), the usual driver updates: dri (radeon/i915), network cards,
sound, media, scisi, some filesystem updates (cifs, btrfs), and some
random stuff to round it all out (networking, watchpoints,
tracepoints, etc).

Pretty small, all in all. I'd obviously prefer it to be even smaller,
and I actually dropped a pull request or two, but for being -rc4 this
is by no means horrible. As long as it keeps shrinking, I'll be happy.

                             Linus

---

Aaro Koskinen (3):
      arm: mach-omap2: voltage: debugfs: fix memory leak
      arm: mach-omap2: board-rm680: fix rm680_vemmc regulator constraints
      arm: mach-omap2: mux: free allocated memory on error exit

Ajit Khaparde (3):
      be2net: fix a crash seen during insmod/rmmod test
      be2net: remove netif_stop_queue being called before register_netdev.
      MAINTAINERS: update email ids of the be2net driver maintainers.

Akinobu Mita (1):
      [S390] use asm-generic/cacheflush.h

Alan Cox (1):
      depca: Fix warnings

Alex Deucher (10):
      drm/radeon/kms: rv6xx+ thermal sensor fixes
      drm/radeon/kms: switch back to min->max pll post divider iteration
      drm/radeon/kms: add pll debugging output
      drm/radeon/kms: add new pll algo for avivo asics
      drm/radeon/kms: Enable new pll calculation for avivo+ asics
      drm/radeon: remove 0x4243 pci id
      drm/radeon/kms: add updated ib_execute function for evergreen
      drm/radeon/kms/evergreen: always set certain VGT regs at CP init
      drm/radeon/kms: fix s/r issues with bios scratch regs
      drm/radeon/kms: dynamically allocate power state space

Alexey Charkov (1):
      btrfs: Drop __exit attribute on btrfs_exit_compress

Amerigo Wang (1):
      sound: silent echo'ed messages in Makefile

Andrea Arcangeli (1):
      mm: when migrate_pages returns 0, all pages must have been released

Andy Gospodarek (1):
      gro: reset skb_iif on reuse

Andy Robinson (1):
      ALSA: HDA: cxt5066 - Use asus model for Asus U50F, select
correct SPDIF output

Anton Blanchard (6):
      powerpc/numa: Only use active VPHN count fields
      powerpc/numa: Check for all VPHN changes
      powerpc/numa: Add length when creating OF properties via VPHN
      powerpc/numa: Disable VPHN on dedicated processor partitions
      powerpc/numa: Fix bug in unmap_cpu_from_node
      powerpc: Fix hcall tracepoint recursion

Arnaldo Carvalho de Melo (1):
      perf stat: Fix aggreate counter reading accounting

Ben Dooks (3):
      MAINTAINERS: move s3c2410 drivers to ARM/SAMSUNG ARM
      MAINTAINERS: fixup file entries for "SIMTEC EB2410ITX (BAST)"
      MAINTAINERS: fixup Simtec support email entries

Ben Hutchings (1):
      arm/ixp4xx: Rename FREQ macro to avoid collisions

Ben Skeggs (1):
      drm/nv50: fix display on 0x50

Benjamin Herrenschmidt (2):
      powerpc: Pass the right cpu_spec to ->setup_cpu() on 64-bit
      powerpc: Fix some 6xx/7xxx CPU setup functions

Boaz Harrosh (1):
      Revert "exofs: Set i_mapping->backing_dev_info anyway"

Bob Copeland (2):
      ath5k: fix error handling in ath5k_hw_dma_stop
      ath5k: correct endianness of frame duration

Chaoming Li (1):
      rtlwifi: Fix firmware upload errors

Chris Mason (2):
      Btrfs: catch errors from btrfs_sync_log
      Btrfs: avoid uninit variable warnings in ordered-data.c

Chris Wilson (10):
      drm/i915/sdvo: If at first we don't succeed in reading the response, wait
      drm: Add an interface to reset the device
      drm/i915: Reset state after a GPU reset or resume
      drm/i915/crt: Force the initial probe after reset
      drm/i915: Reset crtc after resume
      drm: Don't switch fb when disabling an output
      drm: Simplify and defend later checks when disabling a crtc
      drm: Avoid leak of adjusted mode along quick set_mode paths
      drm/i915: Suppress spurious vblank interrupts
      drm/i915: Only bind to function 0 of the PCI device

Christoph Hellwig (2):
      hfsplus: fix failed mount handling
      hfsplus: fix up a comparism in hfsplus_file_extend

Chuck Ebbert (4):
      CAN: softing driver depends on IOMEM
      atl1c: Add missing PCI device ID
      hfsplus: do not leak buffer on error
      hfsplus: fix two memory leaks in wrapper.c

Clemens Ladisch (1):
      ALSA: oxygen: fix output routing on Xonar DG

David Dillow (1):
      [SCSI] fix incorrect value of SCSI_MAX_SG_CHAIN_SEGMENTS due to
include file ordering

David Henningsson (3):
      ALSA: HDA: Refactor some redundant code for Conexant 5066/205xx
      ALSA: HDA: Add a new model "asus" for Conexant 5066/205xx
      ALSA: HDA: Fix microphone(s) on Lenovo Edge 13

David S. Miller (5):
      ipv6: Remove route peer binding assertions.
      niu: Fix races between up/down and get_stats.
      net: Fix bug in compat SIOCGETSGCNT handling.
      net: Support compat SIOCGETVIFCNT ioctl in ipv4.
      net: Provide compat support for SIOCGETMIFCNT_IN6 and SIOCGETSGCNT_IN6.

Eric Dumazet (4):
      perf: Fix alloc_callchain_buffers()
      econet: remove compiler warnings
      net: add kmemcheck annotation in __alloc_skb()
      epoll: epoll_wait() should not use timespec_add_ns()

Eric W. Biederman (3):
      net: Fix ip link add netns oops
      net: Add compat ioctl support for the ipv4 multicast ioctl SIOCGETSGCNT
      net: Fix ipv6 neighbour unregister_sysctl_table warning

Fabio Estevam (2):
      ARM: imx: Add VPR200 and MX51_3DS entries to uncompress.h
      ARM: mach-imx/mach-mx25_3ds: Fix section type

Francois Romieu (2):
      r8169: RxFIFO overflow oddities with 8168 chipsets.
      r8169: prevent RxFIFO induced loops in the irq handler.

Frank Blaschka (1):
      qeth: add more strict MTU checking

H. Peter Anvin (2):
      x86-32: Make sure the stack is set up before we use it
      x86, nx: Mark the ACPI resume trampoline code as +x

Heiko Carstens (1):
      [S390] tlb: fix build error caused by THP

Herbert Xu (1):
      gro: Reset dev pointer on reuse

Huang Weiyi (1):
      omap1: remove duplicated #include

Ian Campbell (1):
      xen: netfront: handle incoming GSO SKBs which are not CHECKSUM_PARTIAL

Ian Kent (1):
      Btrfs: Fix memory leak on finding existing super

Ivan Vecera (1):
      r8169: use RxFIFO overflow workaround for 8168c chipset.

James Bottomley (1):
      [SCSI] libsas: fix runaway error handler problem

Jan Glauber (1):
      [S390] qdio: prevent compile warning under CONFIG_32BIT

Janusz Krzysztofik (2):
      ASoC: Amstrad Delta: fix const related build error
      ASoC: CX20442: fix NULL pointer dereference

Jarkko Nikula (1):
      ASoC: Fix module refcount for auxiliary devices

Jarod Wilson (8):
      [media] rc/mce: add mappings for missing keys
      [media] hdpvr: fix up i2c device registration
      [media] lirc_zilog: z8 on usb doesn't like back-to-back i2c_master_send
      [media] ir-kbd-i2c: improve remote behavior with z8 behind usb
      [media] rc/ir-lirc-codec: add back debug spew
      [media] rc: use time unit conversion macros correctly
      [media] mceusb: really fix remaining keybounce issues
      [media] rc/streamzap: fix reporting response times

Javi Merino (1):
      sched, docs: Update schedstats documentation to version 15

Jean-François Moine (3):
      [media] gspca - zc3xx: Bad delay when given by a table
      [media] gspca - zc3xx: Fix bad images with the sensor hv7131r
      [media] gspca - zc3xx: Discard the partial frames

Jeff Layton (13):
      cifs: fix two compiler warning about uninitialized vars
      cifs: handle cancelled requests better
      cifs: send an NT_CANCEL request when a process is signalled
      cifs: simplify SMB header check routine
      cifs: don't pop a printk when sending on a socket is interrupted
      cifs: force a reconnect if there are too many MIDs in flight
      cifs: make CIFS depend on CRYPTO_MD4
      cifs: clean up some compiler warnings
      cifs: fix length checks in checkSMB
      cifs: fix length vs. total_read confusion in cifs_demultiplex_thread
      cifs: enable signing flag in SMB header when server has it on
      cifs: don't send an echo request unless NegProt has been done
      cifs: remove checks for ses->status == CifsExiting

Jesse Larrew (3):
      powerpc/pseries: Fix typo in VPHN comments
      powerpc/pseries: Fix brace placement in numa.c
      powerpc/pseries: Remove unnecessary variable initializations in numa.c

Jin Dongming (3):
      thp: fix splitting of hwpoisoned hugepages
      thp: fix the wrong reported address of hwpoisoned hugepages
      thp: fix unsuitable behavior for hwpoisoned tail page

Johannes Weiner (3):
      memcg: prevent endless loop when charging huge pages
      memcg: prevent endless loop when charging huge pages to near-limit group
      memcg: never OOM when charging huge pages

Josef Bacik (9):
      Btrfs: fix check_path_shared so it returns the right value
      Btrfs: do not release more reserved bytes to the
global_block_rsv than we need
      Btrfs: use the global block reserve if we cannot reserve space
      Btrfs: do error checking in btrfs_del_csums
      Btrfs: handle no memory properly in prepare_pages
      Btrfs: make shrink_delalloc a little friendlier
      fs: make block fiemap mapping length at least blocksize long
      Btrfs: make sure search_bitmap finds something in remove_from_bitmap
      Btrfs: exclude super blocks when we read in block groups

Julia Lawall (3):
      OMAP: PM: SmartReflex: Add missing IS_ERR test
      fs/btrfs/inode.c: Add missing IS_ERR test
      include/net/genetlink.h: Allow genlmsg_cancel to accept a NULL argument

KAMEZAWA Hiroyuki (1):
      memcg: fix event counting breakage from recent THP update

Kashyap, Desai (6):
      [SCSI] mpt2sas: Fix device removal handshake for zoned devices
      [SCSI] mpt2sas: fix internal device reset for older firmware
prior to MPI Rev K
      [SCSI] mpt2sas: Correct resizing calculation for max_queue_depth
      [SCSI] mpt2sas: Fix the race between broadcast asyn event and
scsi command completion
      [SCSI] mpt2sas: Kernel Panic during Large Topology discovery
      [SCSI] mpt2sas: fix Integrated Raid unsynced on shutdown problem

Keith Packard (1):
      drm: Only set DPMS ON when actually configuring a mode

Ken Kawasaki (1):
      axnet_cs: reduce delay time at ei_rx_overrun

Kevin Hilman (1):
      OMAP3: PM: fix save secure RAM to restore MPU power state

Krzysztof Hałasa (1):
      IXP4xx: Fix qmgr_release_queue() flushing unexpected queue entries.

Kurt Van Dijck (1):
      net: fix validate_link_af in rtnetlink core

Li Zefan (8):
      btrfs: Fix threshold calculation for block groups smaller than 1GB
      btrfs: Add helper function free_bitmap()
      btrfs: Free fully occupied bitmap in cluster
      btrfs: Update stats when allocating from a cluster
      btrfs: Add a helper try_merge_free_space()
      btrfs: Check mergeable free space when removing a cluster
      Btrfs: Fix memory leak at umount
      Btrfs: Fix file clone when source offset is not 0

Linus Lüssing (1):
      batman-adv: Fix kernel panic when fetching vis data on a vis server

Linus Torvalds (1):
      Linux 2.6.38-rc4

Lucas Stach (1):
      drm/nouveau: correctly pair hwmon_init and hwmon_fini

Luciano Coelho (1):
      MAINTAINERS: update information for the wl12xx driver

Manjunathappa, Prakash (1):
      ASoC: DaVinci: fix kernel panic due to uninitialized platform_data

Marcelo Roberto Jimenez (1):
      RTC: Prevents a division by zero in kernel code.

Marcin Slusarz (3):
      watchdog: Fix broken nowatchdog logic
      watchdog: Fix sysctl consistency
      watchdog: Don't change watchdog state on read of sysctl

Marek Vasut (1):
      OMAP1: Fix non-working LCD on OMAP310

Martin Schwidefsky (2):
      [S390] pgtable_list corruption
      [S390] missing sacf in uaccess

Mathias Krause (1):
      wl12xx: fix use after free

Mathieu Desnoyers (1):
      tracepoints: Fix section alignment using pointer array

Matt Turner (2):
      amd-k7-agp: remove non-x86 code
      Revert "agp: AMD AGP is used on UP1100 & UP1500 alpha boxen"

Matthieu CASTET (1):
      x86, nx: Don't force pages RW when setting NX bits

Miao Xie (2):
      Btrfs: Don't return acl info when mounting with noacl option
      Btrfs: Fix memory leak in writepage fixup work

Michael S. Tsirkin (1):
      vhost: rcu annotation fixup

Michal Hocko (2):
      memsw: handle swapaccount kernel parameter correctly
      memsw: deprecate noswapaccount kernel parameter and schedule it
for removal

Michal Simek (3):
      microblaze: Fix DTB passing from bootloader
      microblaze: Fix unaligned issue on MMU system with BS=0 DIV=1
      microblaze: Fix ASM optimized code for LE

Michel Lespinasse (1):
      mlock: operate on any regions with protection != PROT_NONE

Mika Westerberg (1):
      ARM: 6652/1: ep93xx: correct the end address of the AC97 memory resource

Minchan Kim (1):
      mm/migration: fix page corruption during hugepage migration

Ming Lei (1):
      arm: omap4: panda: remove usb_nop_xceiv_register(v1)

Mitko Haralanov (1):
      IB/qib: Hold link for TX SERDES settings

Mohammed Shafi Shajakhan (1):
      ath9k: Fix memory leak due to failed PAPRD frames

Namhyung Kim (2):
      vfs: sparse: remove a warning on OPEN_FMODE()
      vfs: sparse: add __FMODE_EXEC

NickCheng (1):
      [SCSI] arcmsr: Fix the issue of system hangup after commands
timeout on ARC-1200

Oliver Hartkopp (1):
      slcan: fix referenced website in Kconfig help text

Pablo Neira Ayuso (3):
      netfilter: ctnetlink: fix missing refcount increment during dumps
      netfilter: arpt_mangle: fix return values of checkentry
      netfilter: ecache: always set events bits, filter them later

Pavel Emelyanov (1):
      bridge: Don't put partly initialized fdb into hash

Pavel Shilovsky (1):
      CIFS: Fix variable types in cifs_iovec_read/write (try #2)

Peter Chubb (1):
      tcp_ecn is an integer not a boolean

Peter Zijlstra (3):
      perf: Fix reading in perf_event_read()
      sched: Fix update_curr_rt()
      lockdep, timer: Fix del_timer_sync() annotation

Rajkumar Manoharan (2):
      ath9k_hw: Fix system hang when resuming from S3/S4
      ath9k: Fix power save usage count imbalance on deinit

Ralf Thielow (1):
      RDMA/amso1100: Fix compile warnings

Randy Dunlap (2):
      gpu/stub: fix acpi_video build error, fix stub kconfig dependencies
      gpu/stub: fix acpi_video build error, fix stub kconfig dependencies

Roland Dreier (1):
      net: Add default_mtu() methods to blackhole dst_ops

Russell King (3):
      [media] fix saa7111 non-detection
      ARM: Update mach-types
      ALSA: AACI: allow writes to MAINCR to take effect

Sascha Hauer (4):
      ARM i.MX28: fix bit operation
      ARM i.MX28: use correct register for setting the rate
      ARM i.MX23/28: remove secondary field from struct clk. It's unused
      ARM i.MX23: use correct register for setting the rate

Scott Wood (2):
      powerpc: Fix pfn_valid() when memory starts at a non-zero address
      powerpc/book3e: Protect complex macro args in mmu-book3e.h

Sebastian Ott (1):
      [S390] reset default for CONFIG_CHSC_SCH

Shawn Guo (1):
      ARM: mxs: fix clock base address missing

Shirish Pargaonkar (2):
      cifs: No need to check crypto blockcipher allocation
      cifs: Possible slab memory corruption while updating extended
stats (repost)

Stanislav Fomichev (1):
      cifs: add check for kmalloc in parse_dacl

Stanislaw Gruszka (3):
      ath9k: fix race conditions when stop device
      ath9k_htc: fix race conditions when stop device
      dl2k: nulify fraginfo after unmap

Stefan Haberland (1):
      [S390] dasd: prevent panic with unresumed devices

Stefan Weil (8):
      drm/radeon: Fix wrong boolean operator
      OMAP: PM: SmartReflex: Fix possible memory leak
      OMAP: PM: SmartReflex: Fix possible null pointer read access
      enc28j60: Fix reading of transmit status vector
      vxge: Fix wrong boolean operator
      isdn: icn: Fix potentially wrong string handling
      s390: Fix wrong size in memcmp (netiucv)
      s390: Fix possibly wrong size in strncmp (smsgiucv)

Stephane Eranian (1):
      perf: Fix Pentium4 raw event validation

Stephen Kitt (1):
      agp: ensure GART has an address before enabling it

Stephen Warren (1):
      ASoC: Fix mask/val_mask confusion snd_soc_dapm_put_volsw()

Steve French (1):
      [CIFS] Update cifs minor version

Steve Wise (3):
      RDMA/cxgb4: Limit MAXBURST EQ context field to 256B
      RDMA/cxgb4: Set the correct device physical function for iWARP connections
      RDMA/ucma: Copy iWARP route information on queries

Steven Rostedt (2):
      tracing: Replace trace_event struct array with pointer array
      tracing: Replace syscall_meta_data struct array with pointer array

Suresh Siddha (2):
      x86, mtrr: Avoid MTRR reprogramming on BP during boot on UP platforms
      x86, mm: avoid possible bogus tlb entries by clearing prev
mm_cpumask after switching mm

Sven Eckelmann (3):
      batman-adv: Remove vis info on hashing errors
      batman-adv: Remove vis info element in free_info
      batman-adv: Make vis info stack traversal threadsafe

Takashi Iwai (2):
      ALSA: hda - Fix memory leaks in conexant jack arrays
      ALSA: use linux/io.h to fix compile warnings

Tejun Heo (1):
      RDMA: Update missed conversion of flush_scheduled_work()

Tero Roponen (1):
      Btrfs: Free correct pointer after using strsep

Tetsuo Handa (3):
      CRED: Fix kernel panic upon security_file_alloc() failure.
      CRED: Fix BUG() upon security_cred_alloc_blank() failure
      CRED: Fix memory and refcount leaks upon security_prepare_creds() failure

Thomas Gleixner (3):
      genirq: Prevent irq storm on migration
      genirq: Add missing status flags to modification mask
      m32r: Fixup last __do_IRQ leftover

Thomas Jacob (1):
      netfilter: xt_iprange: Incorrect xt_iprange boundary check for IPv6

Thomas Weber (1):
      OMAP3: Devkit8000: Change lcd power pin

Tom Herbert (1):
      net: Check rps_flow_table when RPS map length is 1

Tsutomu Itoh (5):
      btrfs: fix return value check of btrfs_join_transaction()
      btrfs: check return value of btrfs_start_ioctl_transaction() properly
      btrfs: checking NULL or not in some functions
      btrfs: fix return value check of btrfs_start_transaction()
      btrfs: cleanup error handling in btrfs_unlink_inode()

Ursula Braun (3):
      qeth: show new mac-address if its setting fails
      qeth: allow HiperSockets framesize change in suspend
      qeth: allow OSA CHPARM change in suspend state

Uwe Kleine-König (2):
      ARM: mxs: acknowledge gpio irq
      ARM: mxs/imx28: remove now unused clock lookup "fec.0"

Vasiliy Kulikov (2):
      net: can: at91_can: world-writable sysfs files
      net: can: janz-ican3: world-writable sysfs termination file

Vladislav Zolotarov (1):
      bnx2x: multicasts in NPAR mode

Yan, Zheng (1):
      Btrfs: Fix page count calculation

Yaniv Rosner (5):
      bnx2x: Remove setting XAUI low-power for BCM8073
      bnx2x: Fix LED blink rate on BCM84823
      bnx2x: Fix port swap for BCM8073
      bnx2x: Fix potential link loss in multi-function mode
      bnx2x: Update bnx2x version to 1.62.00-5

Yevgeny Petrilin (1):
      mlx4_core: Add ConnectX-3 device IDs

liubo (3):
      btrfs: fix uncheck memory allocation in btrfs_submit_compressed_read
      btrfs: fix several uncheck memory allocations
      btrfs: fix missing break in switch phrase

sjur.brandeland@stericsson.com (1):
      caif: bugfix - add caif headers for userspace usage.

^ permalink raw reply	[flat|nested] 62+ messages in thread

* lockdep: possible reason: unannotated irqs-off. (was: Re: Linux 2.6.38-rc4)
  2011-02-08  0:23 Linux 2.6.38-rc4 Linus Torvalds
@ 2011-02-08 10:17 ` Borislav Petkov
  2011-02-08 10:41   ` Peter Zijlstra
  2011-02-08 20:28 ` Heads up Linux 2.6.38-rc4 compile problems Eric W. Biederman
                   ` (5 subsequent siblings)
  6 siblings, 1 reply; 62+ messages in thread
From: Borislav Petkov @ 2011-02-08 10:17 UTC (permalink / raw)
  To: Linus Torvalds; +Cc: Linux Kernel Mailing List, x86

[-- Attachment #1: Type: text/plain, Size: 5921 bytes --]

On Mon, Feb 07, 2011 at 04:23:37PM -0800, Linus Torvalds wrote:
> No travel or cyclone-dodging this time, so as promised, the -rc's are
> now back to the usual weekly schedule.
> 
> There's nothing much that stands out here. Some arch updates (arm and
> powerpc), the usual driver updates: dri (radeon/i915), network cards,
> sound, media, scisi, some filesystem updates (cifs, btrfs), and some
> random stuff to round it all out (networking, watchpoints,
> tracepoints, etc).
> 
> Pretty small, all in all. I'd obviously prefer it to be even smaller,
> and I actually dropped a pull request or two, but for being -rc4 this
> is by no means horrible. As long as it keeps shrinking, I'll be happy.

So, I'm getting the warning below early in the boot process. And yes, I
didn't have it on -rc3. 2.6.38-rc4-00001-g1e554e3-dirty means a debug
diff ontop of -rc4 which shouldn't have anything to do with this splat
since all it does is a couple of printk's due to -rc3 not suspending to
disk properly in some cases.

Now, I'm not going to even pretend to understand the code but here's
what I can read out, you tell me whether it makes sense.

spawn_ksoftirqd() is one of the early initcalls that gets called and
it's notifier callback does kthread_bind() and you can follow in the
backtrace below that this thing comes down to del_timer_sync() which
does the lockdep annotation. Now, problem as I see it, is that hardirqs
were disabled when we were called although it doesn't say so in the
irqtrace events dump after the calltrace: "hardirqs last enabled at
(999)" and our irq event stamp is 1000.

There are actually at least three del_timer_sync()'s inflight so the
problem could be there somewhere, I dunno.

So, is it a wrong lockdep annotation or is it a real problem? I've
attached dmesg and config.

Thanks.

[    0.023211] Setting APIC routing to flat
[    0.024378] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.034634] CPU0: AMD Phenom(tm) II X4 940 Processor stepping 02
[    0.034997] calling  trace_init_flags_sys_exit+0x0/0x12 @ 1
[    0.034997] initcall trace_init_flags_sys_exit+0x0/0x12 returned 0 after 0 usecs
[    0.034997] calling  trace_init_flags_sys_enter+0x0/0x12 @ 1
[    0.034997] initcall trace_init_flags_sys_enter+0x0/0x12 returned 0 after 0 usecs
[    0.034997] calling  init_hw_perf_events+0x0/0xbfa @ 1
[    0.034997] Performance Events: AMD PMU driver.
[    0.035003] ... version:                0
[    0.035140] ... bit width:              48
[    0.035278] ... generic registers:      4
[    0.035415] ... value mask:             0000ffffffffffff
[    0.035554] ... max period:             00007fffffffffff
[    0.035692] ... fixed-purpose events:   0
[    0.035829] ... event mask:             000000000000000f
[    0.036035] initcall init_hw_perf_events+0x0/0xbfa returned 0 after 1952 usecs
[    0.036276] calling  migration_init+0x0/0x6d @ 1
[    0.036418] initcall migration_init+0x0/0x6d returned 0 after 0 usecs
[    0.036558] calling  spawn_ksoftirqd+0x0/0x52 @ 1
[    0.036786] System has AMD C1E enabled
[    0.036937] Switch to broadcast mode on CPU0
[    0.037063] ------------[ cut here ]------------
[    0.037210] WARNING: at kernel/lockdep.c:3151 check_flags+0x63/0x179()
[    0.037349] Hardware name: System Product Name
[    0.037487] Modules linked in:
[    0.037658] Pid: 1, comm: swapper Not tainted 2.6.38-rc4-00001-g1e554e3-dirty #11
[    0.037898] Call Trace:
[    0.037997]  [<ffffffff81039906>] ? warn_slowpath_common+0x85/0x9d
[    0.037997]  [<ffffffff81048251>] ? del_timer_sync+0x0/0xa0
[    0.037997]  [<ffffffff81039938>] ? warn_slowpath_null+0x1a/0x1c
[    0.037997]  [<ffffffff81066f1c>] ? check_flags+0x63/0x179
[    0.037997]  [<ffffffff8106c664>] ? lock_acquire+0x4c/0x192
[    0.037997]  [<ffffffff81048273>] ? del_timer_sync+0x22/0xa0
[    0.037997]  [<ffffffff81048292>] ? del_timer_sync+0x41/0xa0
[    0.037997]  [<ffffffff81048251>] ? del_timer_sync+0x0/0xa0
[    0.037997]  [<ffffffff81439969>] ? schedule_timeout+0x35c/0x3bb
[    0.037997]  [<ffffffff81047e9e>] ? process_timeout+0x0/0x10
[    0.037997]  [<ffffffff814399e6>] ? schedule_timeout_uninterruptible+0x1e/0x20
[    0.037997]  [<ffffffff81036c44>] ? wait_task_inactive+0x181/0x1cd
[    0.037997]  [<ffffffff810584bc>] ? kthread_bind+0x1c/0x6d
[    0.037997]  [<ffffffff81436007>] ? cpu_callback+0x87/0x3e8
[    0.037997]  [<ffffffff81931ed1>] ? spawn_ksoftirqd+0x0/0x52
[    0.037997]  [<ffffffff81931ef5>] ? spawn_ksoftirqd+0x24/0x52
[    0.037997]  [<ffffffff810001f2>] ? do_one_initcall+0x57/0x133
[    0.037997]  [<ffffffff8192258a>] ? kernel_init+0x67/0x1c1
[    0.037997]  [<ffffffff81002f94>] ? kernel_thread_helper+0x4/0x10
[    0.037997]  [<ffffffff81032a78>] ? finish_task_switch+0x80/0xec
[    0.037997]  [<ffffffff8143c499>] ? _raw_spin_unlock_irq+0x3b/0x58
[    0.037997]  [<ffffffff8143cb44>] ? restore_args+0x0/0x30
[    0.037997]  [<ffffffff81922523>] ? kernel_init+0x0/0x1c1
[    0.037997]  [<ffffffff81002f90>] ? kernel_thread_helper+0x0/0x10
[    0.037997] ---[ end trace 4eaa2a86a8e2da22 ]---
[    0.037997] possible reason: unannotated irqs-off.
[    0.037997] irq event stamp: 1000
[    0.037997] hardirqs last  enabled at (999): [<ffffffff8143c48e>] _raw_spin_unlock_irq+0x30/0x58
[    0.037997] hardirqs last disabled at (998): [<ffffffff8143ba38>] _raw_spin_lock_irq+0x19/0x79
[    0.037997] softirqs last  enabled at (908): [<ffffffff81040864>] __do_softirq+0x2a0/0x2f0
[    0.037997] softirqs last disabled at (1000): [<ffffffff81048273>] del_timer_sync+0x22/0xa0
[    0.038006] initcall spawn_ksoftirqd+0x0/0x52 returned 0 after 1952 usecs
[    0.039000] calling  init_workqueues+0x0/0x34d @ 1
[    0.040114] initcall init_workqueues+0x0/0x34d returned 0 after 976 usecs
[    0.041001] calling  init_call_single_data+0x0/0xaa @ 1
[    0.041143] initcall init_call_single_data+0x0/0xaa returned 0 after 0 usecs


-- 
Regards/Gruss,
    Boris.

[-- Attachment #2: dmesg.log --]
[-- Type: text/plain, Size: 104949 bytes --]

[    0.000000] Linux version 2.6.38-rc4-00001-g1e554e3-dirty (boris@liondog) (gcc version 4.4.5 (Debian 4.4.5-10) ) #11 SMP PREEMPT Tue Feb 8 07:52:51 CET 2011
[    0.000000] Command line: root=/dev/sda1 vga=0 log_bug_len=10M resume=/dev/hda2 no_console_suspend debug initcall_debug
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
[    0.000000]  BIOS-e820: 00000000cffb0000 - 00000000cffbe000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cffbe000 - 00000000cffe0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] DMI: M3A78 PRO/System Product Name, BIOS 1203    06/29/2009
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFF0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000230000000 aka 8960M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xcffb0 max_arch_pfn = 0x400000000
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: 0000000000000000-00000000cffb0000
[    0.000000]  0000000000 - 00c0000000 page 1G
[    0.000000]  00c0000000 - 00cfe00000 page 2M
[    0.000000]  00cfe00000 - 00cffb0000 page 4k
[    0.000000] kernel direct mapping tables up to cffb0000 @ 1fffd000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-0000000230000000
[    0.000000]  0100000000 - 0200000000 page 1G
[    0.000000]  0200000000 - 0230000000 page 2M
[    0.000000] kernel direct mapping tables up to 230000000 @ cffae000-cffb0000
[    0.000000] ACPI: RSDP 00000000000fa1e0 00024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 00000000cffb0100 00054 (v01 062909 OEMXSDT  20090629 MSFT 00000097)
[    0.000000] ACPI: FACP 00000000cffb0290 000F4 (v03 062909 OEMFACP  20090629 MSFT 00000097)
[    0.000000] ACPI: DSDT 00000000cffb0440 09099 (v01  P0020 P0020000 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 00000000cffbe000 00040
[    0.000000] ACPI: APIC 00000000cffb0390 0006C (v01 062909 OEMAPIC  20090629 MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000cffb0400 0003C (v01 062909 OEMMCFG  20090629 MSFT 00000097)
[    0.000000] ACPI: OEMB 00000000cffbe040 00071 (v01 062909 AMI_OEM  20090629 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000cffb94e0 00038 (v01 062909 OEMHPET  20090629 MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000cffb9520 0088C (v01 A M I  POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000]  [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff8800bc000000-ffff8800c31fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00230000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000cffb0
[    0.000000]     0: 0x00100000 -> 0x00230000
[    0.000000] On node 0 totalpages: 2096959
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 6 pages reserved
[    0.000000]   DMA zone: 3921 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 833512 pages, LIFO batch:31
[    0.000000]   Normal zone: 17024 pages used for memmap
[    0.000000]   Normal zone: 1228160 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000cffb0000 - 00000000cffbe000
[    0.000000] PM: Registered nosave memory: 00000000cffbe000 - 00000000cffe0000
[    0.000000] PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000
[    0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000ff700000
[    0.000000] PM: Registered nosave memory: 00000000ff700000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2f700000)
[    0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 474 pages/cpu @ffff8800cee00000 s1909760 r8192 d23552 u2097152
[    0.000000] pcpu-alloc: s1909760 r8192 d23552 u2097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2065593
[    0.000000] Kernel command line: root=/dev/sda1 vga=0 log_bug_len=10M resume=/dev/hda2 no_console_suspend debug initcall_debug
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ c4000000 size 32 MB
[    0.000000] Aperture pointing to e820 RAM. Ignoring.
[    0.000000] Your BIOS doesn't leave a aperture memory hole
[    0.000000] Please enable the IOMMU option in the BIOS setup
[    0.000000] This costs you 64 MB of RAM
[    0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[    0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[    0.000000] Memory: 8097652k/9175040k available (4351k kernel code, 787204k absent, 290184k reserved, 3128k data, 2344k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptable hierarchical RCU implementation.
[    0.000000] 	RCU lockdep checking is enabled.
[    0.000000] NR_IRQS:384
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     16384
[    0.000000] ... MAX_LOCKDEP_CHAINS:      32768
[    0.000000] ... CHAINHASH_SIZE:          16384
[    0.000000]  memory used by lock dependency info: 6367 kB
[    0.000000]  per task-struct memory footprint: 2688 bytes
[    0.000000] ------------------------
[    0.000000] | Locking API testsuite:
[    0.000000] ----------------------------------------------------------------------------
[    0.000000]                                  | spin |wlock |rlock |mutex | wsem | rsem |
[    0.000000]   --------------------------------------------------------------------------
[    0.000000]                      A-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]                  A-B-B-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]              A-B-B-C-C-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]              A-B-C-A-B-C deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]          A-B-B-C-C-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]          A-B-C-D-B-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]          A-B-C-D-B-C-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]                     double unlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]                   initialize held:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]                  bad unlock order:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]   --------------------------------------------------------------------------
[    0.000000]               recursive read-lock:             |  ok  |             |  ok  |
[    0.000000]            recursive read-lock #2:             |  ok  |             |  ok  |
[    0.000000]             mixed read-write-lock:             |  ok  |             |  ok  |
[    0.000000]             mixed write-read-lock:             |  ok  |             |  ok  |
[    0.000000]   --------------------------------------------------------------------------
[    0.000000]      hard-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
[    0.000000]      soft-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
[    0.000000]      hard-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
[    0.000000]      soft-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
[    0.000000]        sirq-safe-A => hirqs-on/12:  ok  |  ok  |  ok  |
[    0.000000]        sirq-safe-A => hirqs-on/21:  ok  |  ok  |  ok  |
[    0.000000]          hard-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
[    0.000000]          soft-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
[    0.000000]          hard-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
[    0.000000]          soft-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
[    0.000000]       hard-irq lock-inversion/123:  ok  |  ok  |  ok  |
[    0.000000]       soft-irq lock-inversion/123:  ok  |  ok  |  ok  |
[    0.000000]       hard-irq lock-inversion/132:  ok  |  ok  |  ok  |
[    0.000000]       soft-irq lock-inversion/132:  ok  |  ok  |  ok  |
[    0.000000]       hard-irq lock-inversion/213:  ok  |  ok  |  ok  |
[    0.000000]       soft-irq lock-inversion/213:  ok  |  ok  |  ok  |
[    0.000000]       hard-irq lock-inversion/231:  ok  |  ok  |  ok  |
[    0.000000]       soft-irq lock-inversion/231:  ok  |  ok  |  ok  |
[    0.000000]       hard-irq lock-inversion/312:  ok  |  ok  |  ok  |
[    0.000000]       soft-irq lock-inversion/312:  ok  |  ok  |  ok  |
[    0.000000]       hard-irq lock-inversion/321:  ok  |  ok  |  ok  |
[    0.000000]       soft-irq lock-inversion/321:  ok  |  ok  |  ok  |
[    0.000000]       hard-irq read-recursion/123:  ok  |
[    0.000000]       soft-irq read-recursion/123:  ok  |
[    0.000000]       hard-irq read-recursion/132:  ok  |
[    0.000000]       soft-irq read-recursion/132:  ok  |
[    0.000000]       hard-irq read-recursion/213:  ok  |
[    0.000000]       soft-irq read-recursion/213:  ok  |
[    0.000000]       hard-irq read-recursion/231:  ok  |
[    0.000000]       soft-irq read-recursion/231:  ok  |
[    0.000000]       hard-irq read-recursion/312:  ok  |
[    0.000000]       soft-irq read-recursion/312:  ok  |
[    0.000000]       hard-irq read-recursion/321:  ok  |
[    0.000000]       soft-irq read-recursion/321:  ok  |
[    0.000000] -------------------------------------------------------
[    0.000000] Good, all 218 testcases passed! |
[    0.000000] ---------------------------------
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 3007.390 MHz processor.
[    0.002003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6014.78 BogoMIPS (lpj=3007390)
[    0.002282] pid_max: default: 32768 minimum: 301
[    0.002624] Mount-cache hash table entries: 256
[    0.004176] tseg: 0000000000
[    0.004333] CPU: Physical Processor ID: 0
[    0.004471] CPU: Processor Core ID: 0
[    0.004609] mce: CPU supports 6 MCE banks
[    0.004754] using C1E aware idle routine
[    0.004947] ACPI: Core revision 20110112
[    0.022063] ftrace: allocating 17116 entries in 68 pages
[    0.023211] Setting APIC routing to flat
[    0.024378] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.034634] CPU0: AMD Phenom(tm) II X4 940 Processor stepping 02
[    0.034997] calling  trace_init_flags_sys_exit+0x0/0x12 @ 1
[    0.034997] initcall trace_init_flags_sys_exit+0x0/0x12 returned 0 after 0 usecs
[    0.034997] calling  trace_init_flags_sys_enter+0x0/0x12 @ 1
[    0.034997] initcall trace_init_flags_sys_enter+0x0/0x12 returned 0 after 0 usecs
[    0.034997] calling  init_hw_perf_events+0x0/0xbfa @ 1
[    0.034997] Performance Events: AMD PMU driver.
[    0.035003] ... version:                0
[    0.035140] ... bit width:              48
[    0.035278] ... generic registers:      4
[    0.035415] ... value mask:             0000ffffffffffff
[    0.035554] ... max period:             00007fffffffffff
[    0.035692] ... fixed-purpose events:   0
[    0.035829] ... event mask:             000000000000000f
[    0.036035] initcall init_hw_perf_events+0x0/0xbfa returned 0 after 1952 usecs
[    0.036276] calling  migration_init+0x0/0x6d @ 1
[    0.036418] initcall migration_init+0x0/0x6d returned 0 after 0 usecs
[    0.036558] calling  spawn_ksoftirqd+0x0/0x52 @ 1
[    0.036786] System has AMD C1E enabled
[    0.036937] Switch to broadcast mode on CPU0
[    0.037063] ------------[ cut here ]------------
[    0.037210] WARNING: at kernel/lockdep.c:3151 check_flags+0x63/0x179()
[    0.037349] Hardware name: System Product Name
[    0.037487] Modules linked in:
[    0.037658] Pid: 1, comm: swapper Not tainted 2.6.38-rc4-00001-g1e554e3-dirty #11
[    0.037898] Call Trace:
[    0.037997]  [<ffffffff81039906>] ? warn_slowpath_common+0x85/0x9d
[    0.037997]  [<ffffffff81048251>] ? del_timer_sync+0x0/0xa0
[    0.037997]  [<ffffffff81039938>] ? warn_slowpath_null+0x1a/0x1c
[    0.037997]  [<ffffffff81066f1c>] ? check_flags+0x63/0x179
[    0.037997]  [<ffffffff8106c664>] ? lock_acquire+0x4c/0x192
[    0.037997]  [<ffffffff81048273>] ? del_timer_sync+0x22/0xa0
[    0.037997]  [<ffffffff81048292>] ? del_timer_sync+0x41/0xa0
[    0.037997]  [<ffffffff81048251>] ? del_timer_sync+0x0/0xa0
[    0.037997]  [<ffffffff81439969>] ? schedule_timeout+0x35c/0x3bb
[    0.037997]  [<ffffffff81047e9e>] ? process_timeout+0x0/0x10
[    0.037997]  [<ffffffff814399e6>] ? schedule_timeout_uninterruptible+0x1e/0x20
[    0.037997]  [<ffffffff81036c44>] ? wait_task_inactive+0x181/0x1cd
[    0.037997]  [<ffffffff810584bc>] ? kthread_bind+0x1c/0x6d
[    0.037997]  [<ffffffff81436007>] ? cpu_callback+0x87/0x3e8
[    0.037997]  [<ffffffff81931ed1>] ? spawn_ksoftirqd+0x0/0x52
[    0.037997]  [<ffffffff81931ef5>] ? spawn_ksoftirqd+0x24/0x52
[    0.037997]  [<ffffffff810001f2>] ? do_one_initcall+0x57/0x133
[    0.037997]  [<ffffffff8192258a>] ? kernel_init+0x67/0x1c1
[    0.037997]  [<ffffffff81002f94>] ? kernel_thread_helper+0x4/0x10
[    0.037997]  [<ffffffff81032a78>] ? finish_task_switch+0x80/0xec
[    0.037997]  [<ffffffff8143c499>] ? _raw_spin_unlock_irq+0x3b/0x58
[    0.037997]  [<ffffffff8143cb44>] ? restore_args+0x0/0x30
[    0.037997]  [<ffffffff81922523>] ? kernel_init+0x0/0x1c1
[    0.037997]  [<ffffffff81002f90>] ? kernel_thread_helper+0x0/0x10
[    0.037997] ---[ end trace 4eaa2a86a8e2da22 ]---
[    0.037997] possible reason: unannotated irqs-off.
[    0.037997] irq event stamp: 1000
[    0.037997] hardirqs last  enabled at (999): [<ffffffff8143c48e>] _raw_spin_unlock_irq+0x30/0x58
[    0.037997] hardirqs last disabled at (998): [<ffffffff8143ba38>] _raw_spin_lock_irq+0x19/0x79
[    0.037997] softirqs last  enabled at (908): [<ffffffff81040864>] __do_softirq+0x2a0/0x2f0
[    0.037997] softirqs last disabled at (1000): [<ffffffff81048273>] del_timer_sync+0x22/0xa0
[    0.038006] initcall spawn_ksoftirqd+0x0/0x52 returned 0 after 1952 usecs
[    0.039000] calling  init_workqueues+0x0/0x34d @ 1
[    0.040114] initcall init_workqueues+0x0/0x34d returned 0 after 976 usecs
[    0.041001] calling  init_call_single_data+0x0/0xaa @ 1
[    0.041143] initcall init_call_single_data+0x0/0xaa returned 0 after 0 usecs
[    0.041284] calling  cpu_stop_init+0x0/0xc5 @ 1
[    0.042028] initcall cpu_stop_init+0x0/0xc5 returned 0 after 976 usecs
[    0.042172] calling  tracer_alloc_buffers+0x0/0x1c8 @ 1
[    0.043040] initcall tracer_alloc_buffers+0x0/0x1c8 returned 0 after 0 usecs
[    0.043180] calling  init_trace_printk+0x0/0x12 @ 1
[    0.043320] initcall init_trace_printk+0x0/0x12 returned 0 after 0 usecs
[    0.043460] calling  mce_amd_init+0x0/0x15d @ 1
[    0.043599] MCE: In-kernel MCE decoding enabled.
[    0.043738] initcall mce_amd_init+0x0/0x15d returned 0 after 0 usecs
[    0.046033] lockdep: fixing up alternatives.
[    0.048064] Booting Node   0, Processors  #1
[    0.119998] Switch to broadcast mode on CPU1
[    0.122034] lockdep: fixing up alternatives.
[    0.123035]  #2
[    0.194994] Switch to broadcast mode on CPU2
[    0.197035] lockdep: fixing up alternatives.
[    0.198032]  #3 Ok.
[    0.269987] Switch to broadcast mode on CPU3
[    0.269993] Brought up 4 CPUs
[    0.269995] Total of 4 processors activated (24016.16 BogoMIPS).
[    0.272127] calling  init_mmap_min_addr+0x0/0x16 @ 1
[    0.273971] initcall init_mmap_min_addr+0x0/0x16 returned 0 after 0 usecs
[    0.274113] calling  init_cpufreq_transition_notifier_list+0x0/0x1b @ 1
[    0.274974] initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 usecs
[    0.275218] calling  net_ns_init+0x0/0x19a @ 1
[    0.275362] initcall net_ns_init+0x0/0x19a returned 0 after 0 usecs
[    0.275503] calling  e820_mark_nvs_memory+0x0/0x40 @ 1
[    0.275662] initcall e820_mark_nvs_memory+0x0/0x40 returned 0 after 0 usecs
[    0.275803] calling  cpufreq_tsc+0x0/0x37 @ 1
[    0.275970] initcall cpufreq_tsc+0x0/0x37 returned 0 after 0 usecs
[    0.276110] calling  pci_reboot_init+0x0/0x14 @ 1
[    0.276251] initcall pci_reboot_init+0x0/0x14 returned 0 after 0 usecs
[    0.276391] calling  init_lapic_sysfs+0x0/0x30 @ 1
[    0.276550] initcall init_lapic_sysfs+0x0/0x30 returned 0 after 0 usecs
[    0.276971] calling  init_smp_flush+0x0/0x4f @ 1
[    0.277112] initcall init_smp_flush+0x0/0x4f returned 0 after 0 usecs
[    0.277253] calling  alloc_frozen_cpus+0x0/0xd @ 1
[    0.277392] initcall alloc_frozen_cpus+0x0/0xd returned 0 after 0 usecs
[    0.277533] calling  sysctl_init+0x0/0x16 @ 1
[    0.277674] initcall sysctl_init+0x0/0x16 returned 0 after 0 usecs
[    0.277814] calling  ksysfs_init+0x0/0x94 @ 1
[    0.277976] initcall ksysfs_init+0x0/0x94 returned 0 after 0 usecs
[    0.278116] calling  init_jiffies_clocksource+0x0/0x12 @ 1
[    0.278257] initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 usecs
[    0.278499] calling  pm_init+0x0/0x39 @ 1
[    0.278646] initcall pm_init+0x0/0x39 returned 0 after 0 usecs
[    0.278786] calling  pm_disk_init+0x0/0x19 @ 1
[    0.278928] initcall pm_disk_init+0x0/0x19 returned 0 after 0 usecs
[    0.278970] calling  swsusp_header_init+0x0/0x31 @ 1
[    0.279110] initcall swsusp_header_init+0x0/0x31 returned 0 after 0 usecs
[    0.279251] calling  init_zero_pfn+0x0/0x35 @ 1
[    0.279391] initcall init_zero_pfn+0x0/0x35 returned 0 after 0 usecs
[    0.279531] calling  fsnotify_init+0x0/0x34 @ 1
[    0.279672] initcall fsnotify_init+0x0/0x34 returned 0 after 0 usecs
[    0.279812] calling  filelock_init+0x0/0x2e @ 1
[    0.279980] initcall filelock_init+0x0/0x2e returned 0 after 0 usecs
[    0.280120] calling  init_script_binfmt+0x0/0x14 @ 1
[    0.280260] initcall init_script_binfmt+0x0/0x14 returned 0 after 0 usecs
[    0.280400] calling  init_elf_binfmt+0x0/0x14 @ 1
[    0.280539] initcall init_elf_binfmt+0x0/0x14 returned 0 after 0 usecs
[    0.280680] calling  init_compat_elf_binfmt+0x0/0x14 @ 1
[    0.280820] initcall init_compat_elf_binfmt+0x0/0x14 returned 0 after 0 usecs
[    0.280969] calling  debugfs_init+0x0/0x5c @ 1
[    0.281111] initcall debugfs_init+0x0/0x5c returned 0 after 0 usecs
[    0.281251] calling  random32_init+0x0/0xd8 @ 1
[    0.281391] initcall random32_init+0x0/0xd8 returned 0 after 0 usecs
[    0.281531] calling  cpufreq_core_init+0x0/0xa3 @ 1
[    0.281674] initcall cpufreq_core_init+0x0/0xa3 returned 0 after 0 usecs
[    0.281814] calling  cpuidle_init+0x0/0x40 @ 1
[    0.281973] initcall cpuidle_init+0x0/0x40 returned 0 after 0 usecs
[    0.282113] calling  sock_init+0x0/0x83 @ 1
[    0.282337] initcall sock_init+0x0/0x83 returned 0 after 0 usecs
[    0.282477] calling  netpoll_init+0x0/0x41 @ 1
[    0.282617] initcall netpoll_init+0x0/0x41 returned 0 after 0 usecs
[    0.282757] calling  netlink_proto_init+0x0/0x1c7 @ 1
[    0.282991] NET: Registered protocol family 16
[    0.283157] initcall netlink_proto_init+0x0/0x1c7 returned 0 after 0 usecs
[    0.283298] calling  bdi_class_init+0x0/0x4d @ 1
[    0.283460] initcall bdi_class_init+0x0/0x4d returned 0 after 0 usecs
[    0.283460] calling  kobject_uevent_init+0x0/0x21 @ 1
[    0.283460] initcall kobject_uevent_init+0x0/0x21 returned 0 after 0 usecs
[    0.283969] calling  pcibus_class_init+0x0/0x19 @ 1
[    0.284135] initcall pcibus_class_init+0x0/0x19 returned 0 after 0 usecs
[    0.284135] calling  pci_driver_init+0x0/0x12 @ 1
[    0.284276] initcall pci_driver_init+0x0/0x12 returned 0 after 0 usecs
[    0.284276] calling  tty_class_init+0x0/0x38 @ 1
[    0.284991] initcall tty_class_init+0x0/0x38 returned 0 after 0 usecs
[    0.285115] calling  vtconsole_class_init+0x0/0xc2 @ 1
[    0.285275] initcall vtconsole_class_init+0x0/0xc2 returned 0 after 0 usecs
[    0.285275] calling  wakeup_sources_debugfs_init+0x0/0x2b @ 1
[    0.285275] initcall wakeup_sources_debugfs_init+0x0/0x2b returned 0 after 0 usecs
[    0.285968] calling  i2c_init+0x0/0x3e @ 1
[    0.286130] initcall i2c_init+0x0/0x3e returned 0 after 0 usecs
[    0.286130] calling  amd_postcore_init+0x0/0x150 @ 1
[    0.286257] node 0 link 0: io port [1000, ffffff]
[    0.286397] TOM: 00000000d0000000 aka 3328M
[    0.286968] Fam 10h mmconf [e0000000, efffffff]
[    0.287107] node 0 link 0: mmio [a0000, bffff]
[    0.287280] node 0 link 0: mmio [d0000000, dfffffff]
[    0.287453] node 0 link 0: mmio [e0000000, efffffff] ==> none
[    0.287627] node 0 link 0: mmio [f0000000, ffefffff]
[    0.287799] TOM2: 0000000230000000 aka 8960M
[    0.287799] bus: [00, 07] on node 0 link 0
[    0.287799] bus: 00 index 0 [io  0x0000-0xffff]
[    0.287799] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[    0.287799] bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
[    0.287799] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
[    0.287799] bus: 00 index 4 [mem 0x230000000-0xfcffffffff]
[    0.287808] Extended Config Space enabled on 1 nodes
[    0.287978] initcall amd_postcore_init+0x0/0x150 returned 0 after 2929 usecs
[    0.288120] calling  arch_kdebugfs_init+0x0/0x24 @ 1
[    0.288264] initcall arch_kdebugfs_init+0x0/0x24 returned 0 after 0 usecs
[    0.288404] calling  mtrr_if_init+0x0/0x78 @ 1
[    0.288548] initcall mtrr_if_init+0x0/0x78 returned 0 after 0 usecs
[    0.288688] calling  acpi_configure_wakeup_memory+0x0/0x1e @ 1
[    0.288832] initcall acpi_configure_wakeup_memory+0x0/0x1e returned 0 after 0 usecs
[    0.289968] calling  ffh_cstate_init+0x0/0x2a @ 1
[    0.290107] initcall ffh_cstate_init+0x0/0x2a returned -1 after 0 usecs
[    0.290247] initcall ffh_cstate_init+0x0/0x2a returned with error code -1 
[    0.290389] calling  acpi_pci_init+0x0/0x5c @ 1
[    0.290527] ACPI: bus type pci registered
[    0.290666] initcall acpi_pci_init+0x0/0x5c returned 0 after 0 usecs
[    0.290807] calling  pci_arch_init+0x0/0x69 @ 1
[    0.290991] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.291234] PCI: not using MMCONFIG
[    0.291373] PCI: Using configuration type 1 for base access
[    0.291512] PCI: Using configuration type 1 for extended access
[    0.291655] initcall pci_arch_init+0x0/0x69 returned 0 after 0 usecs
[    0.291796] calling  topology_init+0x0/0x40 @ 1
[    0.292018] initcall topology_init+0x0/0x40 returned 0 after 0 usecs
[    0.292115] calling  mtrr_init_finialize+0x0/0x3d @ 1
[    0.292254] mtrr: your CPUs had inconsistent fixed MTRR settings
[    0.292393] mtrr: probably your BIOS does not setup all CPUs.
[    0.292966] mtrr: corrected configuration.
[    0.293106] initcall mtrr_init_finialize+0x0/0x3d returned 0 after 976 usecs
[    0.293246] calling  init_vdso_vars+0x0/0x221 @ 1
[    0.293392] initcall init_vdso_vars+0x0/0x221 returned 0 after 0 usecs
[    0.293533] calling  sysenter_setup+0x0/0x2d8 @ 1
[    0.293674] initcall sysenter_setup+0x0/0x2d8 returned 0 after 0 usecs
[    0.293815] calling  param_sysfs_init+0x0/0x191 @ 1
[    0.308024] initcall param_sysfs_init+0x0/0x191 returned 0 after 14646 usecs
[    0.308116] calling  pm_sysrq_init+0x0/0x1e @ 1
[    0.308968] initcall pm_sysrq_init+0x0/0x1e returned 0 after 0 usecs
[    0.309109] calling  default_bdi_init+0x0/0xb2 @ 1
[    0.309250] initcall default_bdi_init+0x0/0xb2 returned 0 after 0 usecs
[    0.309250] calling  init_bio+0x0/0xef @ 1
[    0.309301] bio: create slab <bio-0> at 0
[    0.309994] initcall init_bio+0x0/0xef returned 0 after 976 usecs
[    0.310134] calling  fsnotify_notification_init+0x0/0x8b @ 1
[    0.310286] initcall fsnotify_notification_init+0x0/0x8b returned 0 after 0 usecs
[    0.310528] calling  cryptomgr_init+0x0/0x12 @ 1
[    0.310668] initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs
[    0.310808] calling  blk_settings_init+0x0/0x2a @ 1
[    0.310965] initcall blk_settings_init+0x0/0x2a returned 0 after 0 usecs
[    0.311106] calling  blk_ioc_init+0x0/0x2a @ 1
[    0.311250] initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs
[    0.311390] calling  blk_softirq_init+0x0/0x6e @ 1
[    0.311531] initcall blk_softirq_init+0x0/0x6e returned 0 after 0 usecs
[    0.311671] calling  blk_iopoll_setup+0x0/0x6e @ 1
[    0.311811] initcall blk_iopoll_setup+0x0/0x6e returned 0 after 0 usecs
[    0.311964] calling  genhd_device_init+0x0/0x7b @ 1
[    0.312124] initcall genhd_device_init+0x0/0x7b returned 0 after 0 usecs
[    0.312124] calling  pci_slot_init+0x0/0x4b @ 1
[    0.312264] initcall pci_slot_init+0x0/0x4b returned 0 after 0 usecs
[    0.312405] calling  fbmem_init+0x0/0x98 @ 1
[    0.313164] initcall fbmem_init+0x0/0x98 returned 0 after 976 usecs
[    0.313164] calling  acpi_init+0x0/0x10a @ 1
[    0.314916] ACPI: EC: Look up EC in DSDT
[    0.318434] ACPI: Executed 2 blocks of module-level executable AML code
[    0.339705] ACPI: Interpreter enabled
[    0.339846] ACPI: (supports S0 S1 S3 S4 S5)
[    0.340206] ACPI: Using IOAPIC for interrupt routing
[    0.340518] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.342288] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.409973] initcall acpi_init+0x0/0x10a returned 0 after 94712 usecs
[    0.410119] calling  dock_init+0x0/0xa5 @ 1
[    0.410549] ACPI: No dock devices found.
[    0.410693] initcall dock_init+0x0/0xa5 returned 0 after 976 usecs
[    0.411950] calling  acpi_pci_root_init+0x0/0x2d @ 1
[    0.412090] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.412650] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.413439] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[    0.413580] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
[    0.413720] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.413949] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[    0.414190] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff]
[    0.414430] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[    0.414686] pci 0000:00:00.0: [1022:9600] type 0 class 0x000600
[    0.416983] pci 0000:00:02.0: [1022:9603] type 1 class 0x000604
[    0.417156] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.417300] pci 0000:00:02.0: PME# disabled
[    0.418001] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
[    0.418163] pci 0000:00:11.0: reg 10: [io  0xc000-0xc007]
[    0.418311] pci 0000:00:11.0: reg 14: [io  0xb000-0xb003]
[    0.418459] pci 0000:00:11.0: reg 18: [io  0xa000-0xa007]
[    0.418606] pci 0000:00:11.0: reg 1c: [io  0x9000-0x9003]
[    0.418754] pci 0000:00:11.0: reg 20: [io  0x8000-0x800f]
[    0.418956] pci 0000:00:11.0: reg 24: [mem 0xfe9ff800-0xfe9ffbff]
[    0.419116] pci 0000:00:11.0: set SATA to AHCI mode
[    0.419301] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[    0.419453] pci 0000:00:12.0: reg 10: [mem 0xfe9fe000-0xfe9fefff]
[    0.419664] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[    0.419816] pci 0000:00:12.1: reg 10: [mem 0xfe9fd000-0xfe9fdfff]
[    0.420025] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[    0.420184] pci 0000:00:12.2: reg 10: [mem 0xfe9ff000-0xfe9ff0ff]
[    0.420401] pci 0000:00:12.2: supports D1 D2
[    0.420539] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.420680] pci 0000:00:12.2: PME# disabled
[    0.420843] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[    0.420960] pci 0000:00:13.0: reg 10: [mem 0xfe9fc000-0xfe9fcfff]
[    0.421171] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[    0.421323] pci 0000:00:13.1: reg 10: [mem 0xfe9fb000-0xfe9fbfff]
[    0.421540] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[    0.421698] pci 0000:00:13.2: reg 10: [mem 0xfe9fa800-0xfe9fa8ff]
[    0.422024] pci 0000:00:13.2: supports D1 D2
[    0.422162] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.422303] pci 0000:00:13.2: PME# disabled
[    0.422469] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[    0.422716] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[    0.422872] pci 0000:00:14.1: reg 10: [io  0x0000-0x0007]
[    0.422956] pci 0000:00:14.1: reg 14: [io  0x0000-0x0003]
[    0.423103] pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
[    0.423251] pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
[    0.423399] pci 0000:00:14.1: reg 20: [io  0xff00-0xff0f]
[    0.423593] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[    0.423754] pci 0000:00:14.2: reg 10: [mem 0xfe9f4000-0xfe9f7fff 64bit]
[    0.424010] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.424152] pci 0000:00:14.2: PME# disabled
[    0.424305] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[    0.424528] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[    0.424713] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[    0.424865] pci 0000:00:14.5: reg 10: [mem 0xfe9f9000-0xfe9f9fff]
[    0.425022] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[    0.425185] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[    0.425351] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[    0.425511] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[    0.425674] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[    0.425674] pci 0000:01:00.0: [1002:9598] type 0 class 0x000300
[    0.425674] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.425674] pci 0000:01:00.0: reg 18: [mem 0xfeaf0000-0xfeafffff 64bit]
[    0.425674] pci 0000:01:00.0: reg 20: [io  0xd000-0xd0ff]
[    0.425674] pci 0000:01:00.0: reg 30: [mem 0xfeac0000-0xfeadffff pref]
[    0.425779] pci 0000:01:00.0: supports D1 D2
[    0.425938] pci 0000:01:00.1: [1002:aa20] type 0 class 0x000403
[    0.426959] pci 0000:01:00.1: reg 10: [mem 0xfeaec000-0xfeaeffff 64bit]
[    0.427147] pci 0000:01:00.1: supports D1 D2
[    0.428979] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[    0.429125] pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
[    0.429266] pci 0000:00:02.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.429408] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.429703] pci 0000:02:06.0: [10ec:8139] type 0 class 0x000200
[    0.430969] pci 0000:02:06.0: reg 10: [io  0xe800-0xe8ff]
[    0.431120] pci 0000:02:06.0: reg 14: [mem 0xfebffc00-0xfebffcff]
[    0.431316] pci 0000:02:06.0: reg 30: [mem 0xfebe0000-0xfebeffff pref]
[    0.431484] pci 0000:02:06.0: supports D1 D2
[    0.431621] pci 0000:02:06.0: PME# supported from D1 D2 D3hot
[    0.431764] pci 0000:02:06.0: PME# disabled
[    0.431996] pci 0000:00:14.4: PCI bridge to [bus 02-02] (subtractive decode)
[    0.432139] pci 0000:00:14.4:   bridge window [io  0xe000-0xefff]
[    0.432280] pci 0000:00:14.4:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.432423] pci 0000:00:14.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.432665] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.432946] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.433187] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.433428] pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.433670] pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
[    0.433945] pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[    0.434196] pci_bus 0000:00: on NUMA node 0
[    0.434341] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.434903] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[    0.436202] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[    0.456025] initcall acpi_pci_root_init+0x0/0x2d returned 0 after 42962 usecs
[    0.456095] calling  acpi_pci_link_init+0x0/0x43 @ 1
[    0.456358] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.457505] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.458198] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.458198] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.458774] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.459502] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.461200] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 11 12 14 15) *0, disabled.
[    0.461200] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.462004] initcall acpi_pci_link_init+0x0/0x43 returned 0 after 5858 usecs
[    0.462089] calling  pnp_init+0x0/0x12 @ 1
[    0.462966] initcall pnp_init+0x0/0x12 returned 0 after 0 usecs
[    0.463097] calling  misc_init+0x0/0xb7 @ 1
[    0.463262] initcall misc_init+0x0/0xb7 returned 0 after 0 usecs
[    0.463262] calling  vga_arb_device_init+0x0/0x80 @ 1
[    0.463280] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.463280] vgaarb: loaded
[    0.463345] initcall vga_arb_device_init+0x0/0x80 returned 0 after 976 usecs
[    0.463486] calling  init_scsi+0x0/0x7c @ 1
[    0.464977] SCSI subsystem initialized
[    0.465085] initcall init_scsi+0x0/0x7c returned 0 after 976 usecs
[    0.465225] calling  ata_init+0x0/0x30a @ 1
[    0.465389] libata version 3.00 loaded.
[    0.465941] initcall ata_init+0x0/0x30a returned 0 after 976 usecs
[    0.466081] calling  usb_init+0x0/0x173 @ 1
[    0.466253] usbcore: registered new interface driver usbfs
[    0.466253] usbcore: registered new interface driver hub
[    0.466967] usbcore: registered new device driver usb
[    0.467085] initcall usb_init+0x0/0x173 returned 0 after 976 usecs
[    0.467225] calling  serio_init+0x0/0x31 @ 1
[    0.467388] initcall serio_init+0x0/0x31 returned 0 after 0 usecs
[    0.467388] calling  input_init+0x0/0x10d @ 1
[    0.467977] initcall input_init+0x0/0x10d returned 0 after 976 usecs
[    0.468100] calling  rtc_init+0x0/0x71 @ 1
[    0.468258] initcall rtc_init+0x0/0x71 returned 0 after 0 usecs
[    0.468258] calling  power_supply_class_init+0x0/0x44 @ 1
[    0.468258] initcall power_supply_class_init+0x0/0x44 returned 0 after 0 usecs
[    0.468940] calling  hwmon_init+0x0/0xee @ 1
[    0.469104] initcall hwmon_init+0x0/0xee returned 0 after 0 usecs
[    0.469104] calling  init_soundcore+0x0/0x95 @ 1
[    0.469245] initcall init_soundcore+0x0/0x95 returned 0 after 0 usecs
[    0.469245] calling  alsa_sound_init+0x0/0x95 @ 1
[    0.469245] Advanced Linux Sound Architecture Driver Version 1.0.23.
[    0.469245] initcall alsa_sound_init+0x0/0x95 returned 0 after 976 usecs
[    0.469249] calling  pci_subsys_init+0x0/0x4d @ 1
[    0.469387] PCI: Using ACPI for IRQ routing
[    0.469526] PCI: pci_cache_line_size set to 64 bytes
[    0.469815] reserve RAM buffer: 000000000009f000 - 000000000009ffff 
[    0.469856] reserve RAM buffer: 00000000cffb0000 - 00000000cfffffff 
[    0.470945] initcall pci_subsys_init+0x0/0x4d returned 0 after 976 usecs
[    0.471219] calling  proto_init+0x0/0x12 @ 1
[    0.471362] initcall proto_init+0x0/0x12 returned 0 after 0 usecs
[    0.471502] calling  net_dev_init+0x0/0x222 @ 1
[    0.471972] initcall net_dev_init+0x0/0x222 returned 0 after 976 usecs
[    0.472104] calling  neigh_init+0x0/0x71 @ 1
[    0.472244] initcall neigh_init+0x0/0x71 returned 0 after 0 usecs
[    0.472384] calling  pktsched_init+0x0/0xec @ 1
[    0.472528] initcall pktsched_init+0x0/0xec returned 0 after 0 usecs
[    0.472940] calling  tc_filter_init+0x0/0x4c @ 1
[    0.473079] initcall tc_filter_init+0x0/0x4c returned 0 after 0 usecs
[    0.473219] calling  tc_action_init+0x0/0x4c @ 1
[    0.473358] initcall tc_action_init+0x0/0x4c returned 0 after 0 usecs
[    0.473497] calling  genl_init+0x0/0x84 @ 1
[    0.473664] initcall genl_init+0x0/0x84 returned 0 after 0 usecs
[    0.473803] calling  sysctl_init+0x0/0x48 @ 1
[    0.473941] initcall sysctl_init+0x0/0x48 returned 0 after 0 usecs
[    0.474081] calling  print_ICs+0x0/0x553 @ 1
[    0.474220] initcall print_ICs+0x0/0x553 returned 0 after 0 usecs
[    0.474359] calling  hpet_late_init+0x0/0xd0 @ 1
[    0.474505] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.474813] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    0.476939] initcall hpet_late_init+0x0/0xd0 returned 0 after 2929 usecs
[    0.477079] calling  init_amd_nbs+0x0/0x3f @ 1
[    0.477305] initcall init_amd_nbs+0x0/0x3f returned 0 after 0 usecs
[    0.477445] calling  clocksource_done_booting+0x0/0x5e @ 1
[    0.477586] Switching to clocksource hpet
[    0.477765] initcall clocksource_done_booting+0x0/0x5e returned 0 after 4 usecs
[    0.477738] Switched to NOHz mode on CPU #3
[    0.477725] Switched to NOHz mode on CPU #0
[    0.477731] Switched to NOHz mode on CPU #1
[    0.480212] Switched to NOHz mode on CPU #2
[    0.480354] calling  ftrace_init_debugfs+0x0/0x20d @ 1
[    0.480553] initcall ftrace_init_debugfs+0x0/0x20d returned 0 after 57 usecs
[    0.480694] calling  rb_init_debugfs+0x0/0x2f @ 1
[    0.480843] initcall rb_init_debugfs+0x0/0x2f returned 0 after 8 usecs
[    0.480983] calling  tracer_init_debugfs+0x0/0x38c @ 1
[    0.481369] initcall tracer_init_debugfs+0x0/0x38c returned 0 after 215 usecs
[    0.481510] calling  init_trace_printk_function_export+0x0/0x2f @ 1
[    0.481656] initcall init_trace_printk_function_export+0x0/0x2f returned 0 after 4 usecs
[    0.481897] calling  event_trace_init+0x0/0x2bd @ 1
[    0.485992] initcall event_trace_init+0x0/0x2bd returned 0 after 3836 usecs
[    0.486161] calling  init_pipe_fs+0x0/0x4c @ 1
[    0.486324] initcall init_pipe_fs+0x0/0x4c returned 0 after 23 usecs
[    0.486465] calling  eventpoll_init+0x0/0xdb @ 1
[    0.486618] initcall eventpoll_init+0x0/0xdb returned 0 after 12 usecs
[    0.486758] calling  anon_inode_init+0x0/0x131 @ 1
[    0.486917] initcall anon_inode_init+0x0/0x131 returned 0 after 19 usecs
[    0.487083] calling  blk_scsi_ioctl_init+0x0/0x289 @ 1
[    0.487224] initcall blk_scsi_ioctl_init+0x0/0x289 returned 0 after 0 usecs
[    0.487364] calling  acpi_event_init+0x0/0x52 @ 1
[    0.487535] initcall acpi_event_init+0x0/0x52 returned 0 after 30 usecs
[    0.487674] calling  pnp_system_init+0x0/0x12 @ 1
[    0.487975] initcall pnp_system_init+0x0/0x12 returned 0 after 155 usecs
[    0.488142] calling  pnpacpi_init+0x0/0x8c @ 1
[    0.488281] pnp: PnP ACPI init
[    0.488438] ACPI: bus type pnp registered
[    0.488852] pnp 00:00: [bus 00-ff]
[    0.488991] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.489155] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.489294] pnp 00:00: [io  0x0d00-0xffff window]
[    0.489433] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.489573] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    0.489711] pnp 00:00: [mem 0xd0000000-0xdfffffff window]
[    0.489851] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[    0.490212] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.490646] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[    0.490786] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[    0.491169] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.491422] pnp 00:02: [dma 4]
[    0.491559] pnp 00:02: [io  0x0000-0x000f]
[    0.491697] pnp 00:02: [io  0x0081-0x0083]
[    0.491835] pnp 00:02: [io  0x0087]
[    0.491973] pnp 00:02: [io  0x0089-0x008b]
[    0.492141] pnp 00:02: [io  0x008f]
[    0.492279] pnp 00:02: [io  0x00c0-0x00df]
[    0.492605] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.492767] pnp 00:03: [io  0x0070-0x0071]
[    0.492912] pnp 00:03: [irq 8]
[    0.493247] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.493404] pnp 00:04: [io  0x0061]
[    0.493688] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.493845] pnp 00:05: [io  0x00f0-0x00ff]
[    0.493986] pnp 00:05: [irq 13]
[    0.494300] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.497583] pnp 00:06: [io  0x03f0-0x03f5]
[    0.497722] pnp 00:06: [io  0x03f7]
[    0.497862] pnp 00:06: [irq 6]
[    0.498011] pnp 00:06: [dma 2]
[    0.498383] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.498645] pnp 00:07: [mem 0xfed00000-0xfed003ff]
[    0.498980] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.499313] pnp 00:08: [mem 0xfec00000-0xfec00fff]
[    0.499452] pnp 00:08: [mem 0xfee00000-0xfee00fff]
[    0.499854] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.499995] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.500162] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.500567] pnp 00:09: [io  0x0010-0x001f]
[    0.500706] pnp 00:09: [io  0x0022-0x003f]
[    0.500844] pnp 00:09: [io  0x0062-0x0063]
[    0.500982] pnp 00:09: [io  0x0065-0x006f]
[    0.501146] pnp 00:09: [io  0x0072-0x007f]
[    0.501284] pnp 00:09: [io  0x0080]
[    0.501422] pnp 00:09: [io  0x0084-0x0086]
[    0.501560] pnp 00:09: [io  0x0088]
[    0.501697] pnp 00:09: [io  0x008c-0x008e]
[    0.501836] pnp 00:09: [io  0x0090-0x009f]
[    0.501974] pnp 00:09: [io  0x00a2-0x00bf]
[    0.502137] pnp 00:09: [io  0x00b1]
[    0.502274] pnp 00:09: [io  0x00e0-0x00ef]
[    0.502412] pnp 00:09: [io  0x04d0-0x04d1]
[    0.502550] pnp 00:09: [io  0x040b]
[    0.502688] pnp 00:09: [io  0x04d6]
[    0.502825] pnp 00:09: [io  0x0c00-0x0c01]
[    0.502967] pnp 00:09: [io  0x0c14]
[    0.503129] pnp 00:09: [io  0x0c50-0x0c51]
[    0.503267] pnp 00:09: [io  0x0c52]
[    0.503405] pnp 00:09: [io  0x0c6c]
[    0.503543] pnp 00:09: [io  0x0c6f]
[    0.503680] pnp 00:09: [io  0x0cd0-0x0cd1]
[    0.503819] pnp 00:09: [io  0x0cd2-0x0cd3]
[    0.503956] pnp 00:09: [io  0x0cd4-0x0cd5]
[    0.504119] pnp 00:09: [io  0x0cd6-0x0cd7]
[    0.504257] pnp 00:09: [io  0x0cd8-0x0cdf]
[    0.504397] pnp 00:09: [io  0x0800-0x089f]
[    0.504534] pnp 00:09: [io  0x0b00-0x0b3f]
[    0.504673] pnp 00:09: [io  0x0000-0xffffffffffffffff disabled]
[    0.504813] pnp 00:09: [io  0x0900-0x090f]
[    0.504950] pnp 00:09: [io  0x0910-0x091f]
[    0.505114] pnp 00:09: [io  0xfe00-0xfefe]
[    0.505252] pnp 00:09: [mem 0xffb80000-0xffbfffff]
[    0.505391] pnp 00:09: [mem 0xfec10000-0xfec1001f]
[    0.505808] system 00:09: [io  0x04d0-0x04d1] has been reserved
[    0.505949] system 00:09: [io  0x040b] has been reserved
[    0.506117] system 00:09: [io  0x04d6] has been reserved
[    0.506257] system 00:09: [io  0x0c00-0x0c01] has been reserved
[    0.506397] system 00:09: [io  0x0c14] has been reserved
[    0.506537] system 00:09: [io  0x0c50-0x0c51] has been reserved
[    0.506677] system 00:09: [io  0x0c52] has been reserved
[    0.506817] system 00:09: [io  0x0c6c] has been reserved
[    0.506956] system 00:09: [io  0x0c6f] has been reserved
[    0.507120] system 00:09: [io  0x0cd0-0x0cd1] has been reserved
[    0.507260] system 00:09: [io  0x0cd2-0x0cd3] has been reserved
[    0.507400] system 00:09: [io  0x0cd4-0x0cd5] has been reserved
[    0.507540] system 00:09: [io  0x0cd6-0x0cd7] has been reserved
[    0.507681] system 00:09: [io  0x0cd8-0x0cdf] has been reserved
[    0.507821] system 00:09: [io  0x0800-0x089f] has been reserved
[    0.507960] system 00:09: [io  0x0b00-0x0b3f] has been reserved
[    0.508125] system 00:09: [io  0x0900-0x090f] has been reserved
[    0.508265] system 00:09: [io  0x0910-0x091f] has been reserved
[    0.508409] system 00:09: [io  0xfe00-0xfefe] has been reserved
[    0.508549] system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved
[    0.508690] system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved
[    0.508830] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.509066] pnp 00:0a: [io  0x0060]
[    0.509204] pnp 00:0a: [io  0x0064]
[    0.509345] pnp 00:0a: [irq 1]
[    0.509677] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.512962] pnp 00:0b: [io  0x03f8-0x03ff]
[    0.513130] pnp 00:0b: [irq 4]
[    0.513267] pnp 00:0b: [dma 0 disabled]
[    0.513653] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.514312] pnp 00:0c: [io  0x0000-0xffffffffffffffff disabled]
[    0.514452] pnp 00:0c: [io  0x0e00-0x0e0f]
[    0.514591] pnp 00:0c: [io  0x0e80-0x0e8f]
[    0.514729] pnp 00:0c: [io  0x0f40-0x0f4f]
[    0.514867] pnp 00:0c: [io  0x0a30-0x0a3f]
[    0.515270] system 00:0c: [io  0x0e00-0x0e0f] has been reserved
[    0.515410] system 00:0c: [io  0x0e80-0x0e8f] has been reserved
[    0.515550] system 00:0c: [io  0x0f40-0x0f4f] has been reserved
[    0.515690] system 00:0c: [io  0x0a30-0x0a3f] has been reserved
[    0.515831] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.516082] pnp 00:0d: [mem 0xe0000000-0xefffffff]
[    0.516458] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[    0.516598] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.517156] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[    0.517295] pnp 00:0e: [mem 0x000c0000-0x000cffff]
[    0.517433] pnp 00:0e: [mem 0x000e0000-0x000fffff]
[    0.517572] pnp 00:0e: [mem 0x00100000-0xcfffffff]
[    0.517711] pnp 00:0e: [mem 0xfec00000-0xffffffff]
[    0.518125] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.518267] system 00:0e: [mem 0x000c0000-0x000cffff] has been reserved
[    0.518408] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.518550] system 00:0e: [mem 0x00100000-0xcfffffff] could not be reserved
[    0.518692] system 00:0e: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.518833] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.519357] pnp: PnP ACPI: found 15 devices
[    0.519495] ACPI: ACPI bus type pnp unregistered
[    0.519635] initcall pnpacpi_init+0x0/0x8c returned 0 after 30619 usecs
[    0.519775] calling  chr_dev_init+0x0/0xc5 @ 1
[    0.530843] initcall chr_dev_init+0x0/0xc5 returned 0 after 10668 usecs
[    0.530988] calling  firmware_class_init+0x0/0x19 @ 1
[    0.531261] initcall firmware_class_init+0x0/0x19 returned 0 after 103 usecs
[    0.531402] calling  thermal_init+0x0/0x8d @ 1
[    0.531677] initcall thermal_init+0x0/0x8d returned 0 after 130 usecs
[    0.531817] calling  cpufreq_gov_performance_init+0x0/0x12 @ 1
[    0.531959] initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 1 usecs
[    0.532229] calling  init_acpi_pm_clocksource+0x0/0xf0 @ 1
[    0.536898] initcall init_acpi_pm_clocksource+0x0/0xf0 returned 0 after 4424 usecs
[    0.537162] calling  pcibios_assign_resources+0x0/0x74 @ 1
[    0.537371] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[    0.537511] pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
[    0.537652] pci 0000:00:02.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.537792] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.540623] pci 0000:00:14.4: PCI bridge to [bus 02-02]
[    0.540765] pci 0000:00:14.4:   bridge window [io  0xe000-0xefff]
[    0.540908] pci 0000:00:14.4:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.541072] pci 0000:00:14.4:   bridge window [mem pref disabled]
[    0.541225] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.541367] pci 0000:00:02.0: setting latency timer to 64
[    0.541512] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.541650] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.541790] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.541929] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.542090] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[    0.542233] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.542373] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.542511] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.542651] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.542892] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.543054] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.543193] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7]
[    0.543332] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff]
[    0.543471] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[    0.543610] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000dffff]
[    0.543750] pci_bus 0000:02: resource 8 [mem 0xd0000000-0xdfffffff]
[    0.543889] pci_bus 0000:02: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.544053] initcall pcibios_assign_resources+0x0/0x74 returned 0 after 6592 usecs
[    0.544296] calling  sysctl_core_init+0x0/0x38 @ 1
[    0.544443] initcall sysctl_core_init+0x0/0x38 returned 0 after 6 usecs
[    0.544583] calling  inet_init+0x0/0x233 @ 1
[    0.544771] NET: Registered protocol family 2
[    0.544976] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.545823] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.547329] TCP bind hash table entries: 32768 (order: 9, 2621440 bytes)
[    0.548367] TCP: Hash tables configured (established 262144 bind 32768)
[    0.548508] TCP reno registered
[    0.548662] UDP hash table entries: 4096 (order: 7, 786432 bytes)
[    0.549112] UDP-Lite hash table entries: 4096 (order: 7, 786432 bytes)
[    0.549665] initcall inet_init+0x0/0x233 returned 0 after 4824 usecs
[    0.549807] calling  af_unix_init+0x0/0x55 @ 1
[    0.549956] NET: Registered protocol family 1
[    0.550130] initcall af_unix_init+0x0/0x55 returned 0 after 176 usecs
[    0.550272] calling  pci_apply_final_quirks+0x0/0x106 @ 1
[    0.653869] pci 0000:01:00.0: Boot video device
[    0.654031] PCI: CLS 64 bytes, default 64
[    0.654174] initcall pci_apply_final_quirks+0x0/0x106 returned 0 after 101326 usecs
[    0.654417] calling  default_rootfs+0x0/0x6b @ 1
[    0.654624] initcall default_rootfs+0x0/0x6b returned 0 after 66 usecs
[    0.654764] calling  pci_iommu_init+0x0/0x41 @ 1
[    0.655495] PCI-DMA: Disabling AGP.
[    0.655978] PCI-DMA: aperture base @ c4000000 size 65536 KB
[    0.656147] PCI-DMA: using GART IOMMU.
[    0.656285] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    0.660593] initcall pci_iommu_init+0x0/0x41 returned 0 after 5549 usecs
[    0.660738] calling  i8259A_init_sysfs+0x0/0x31 @ 1
[    0.661214] initcall i8259A_init_sysfs+0x0/0x31 returned 0 after 324 usecs
[    0.661354] calling  vsyscall_init+0x0/0x6c @ 1
[    0.661517] initcall vsyscall_init+0x0/0x6c returned 0 after 22 usecs
[    0.661658] calling  sbf_init+0x0/0xe9 @ 1
[    0.661799] initcall sbf_init+0x0/0xe9 returned 0 after 0 usecs
[    0.661938] calling  i8237A_init_sysfs+0x0/0x22 @ 1
[    0.662342] initcall i8237A_init_sysfs+0x0/0x22 returned 0 after 228 usecs
[    0.662483] calling  init_tsc_clocksource+0x0/0x5f @ 1
[    0.662633] initcall init_tsc_clocksource+0x0/0x5f returned 0 after 9 usecs
[    0.662773] calling  add_rtc_cmos+0x0/0x97 @ 1
[    0.662915] initcall add_rtc_cmos+0x0/0x97 returned 0 after 2 usecs
[    0.663085] calling  cache_sysfs_init+0x0/0x69 @ 1
[    0.665551] initcall cache_sysfs_init+0x0/0x69 returned 0 after 2270 usecs
[    0.665692] calling  mcheck_init_device+0x0/0x10e @ 1
[    0.666580] initcall mcheck_init_device+0x0/0x10e returned 0 after 728 usecs
[    0.666721] calling  threshold_init_device+0x0/0x8c @ 1
[    0.667230] initcall threshold_init_device+0x0/0x8c returned 0 after 359 usecs
[    0.667473] calling  ioapic_init_sysfs+0x0/0xb3 @ 1
[    0.667864] initcall ioapic_init_sysfs+0x0/0xb3 returned 0 after 244 usecs
[    0.668012] calling  add_pcspkr+0x0/0x3a @ 1
[    0.668299] initcall add_pcspkr+0x0/0x3a returned 0 after 125 usecs
[    0.668439] calling  ia32_binfmt_init+0x0/0x14 @ 1
[    0.668582] initcall ia32_binfmt_init+0x0/0x14 returned 0 after 2 usecs
[    0.668721] calling  init_aout_binfmt+0x0/0x14 @ 1
[    0.668863] initcall init_aout_binfmt+0x0/0x14 returned 0 after 1 usecs
[    0.669014] calling  init_sched_debug_procfs+0x0/0x2c @ 1
[    0.669177] initcall init_sched_debug_procfs+0x0/0x2c returned 0 after 7 usecs
[    0.669418] calling  proc_execdomains_init+0x0/0x22 @ 1
[    0.669563] initcall proc_execdomains_init+0x0/0x22 returned 0 after 5 usecs
[    0.669703] calling  ioresources_init+0x0/0x3c @ 1
[    0.669852] initcall ioresources_init+0x0/0x3c returned 0 after 8 usecs
[    0.669992] calling  uid_cache_init+0x0/0x8c @ 1
[    0.670169] initcall uid_cache_init+0x0/0x8c returned 0 after 13 usecs
[    0.670309] calling  init_posix_timers+0x0/0x17a @ 1
[    0.670455] initcall init_posix_timers+0x0/0x17a returned 0 after 6 usecs
[    0.670595] calling  init_posix_cpu_timers+0x0/0xe5 @ 1
[    0.670736] initcall init_posix_cpu_timers+0x0/0xe5 returned 0 after 1 usecs
[    0.670876] calling  nsproxy_cache_init+0x0/0x2d @ 1
[    0.671042] initcall nsproxy_cache_init+0x0/0x2d returned 0 after 6 usecs
[    0.671187] calling  timekeeping_init_device+0x0/0x22 @ 1
[    0.671590] initcall timekeeping_init_device+0x0/0x22 returned 0 after 255 usecs
[    0.671832] calling  init_clocksource_sysfs+0x0/0x50 @ 1
[    0.672241] initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 261 usecs
[    0.672483] calling  init_timer_list_procfs+0x0/0x2c @ 1
[    0.672628] initcall init_timer_list_procfs+0x0/0x2c returned 0 after 5 usecs
[    0.672768] calling  init_tstats_procfs+0x0/0x2c @ 1
[    0.672912] initcall init_tstats_procfs+0x0/0x2c returned 0 after 5 usecs
[    0.673082] calling  lockdep_proc_init+0x0/0x7c @ 1
[    0.673239] initcall lockdep_proc_init+0x0/0x7c returned 0 after 16 usecs
[    0.673379] calling  futex_init+0x0/0x80 @ 1
[    0.673530] initcall futex_init+0x0/0x80 returned 0 after 11 usecs
[    0.673669] calling  proc_dma_init+0x0/0x22 @ 1
[    0.673814] initcall proc_dma_init+0x0/0x22 returned 0 after 5 usecs
[    0.673954] calling  proc_modules_init+0x0/0x22 @ 1
[    0.674123] initcall proc_modules_init+0x0/0x22 returned 0 after 4 usecs
[    0.674263] calling  kallsyms_init+0x0/0x25 @ 1
[    0.674407] initcall kallsyms_init+0x0/0x25 returned 0 after 4 usecs
[    0.674547] calling  snapshot_device_init+0x0/0x12 @ 1
[    0.674879] initcall snapshot_device_init+0x0/0x12 returned 0 after 185 usecs
[    0.675039] calling  ikconfig_init+0x0/0x3a @ 1
[    0.675190] initcall ikconfig_init+0x0/0x3a returned 0 after 5 usecs
[    0.675329] calling  hung_task_init+0x0/0x53 @ 1
[    0.675561] initcall hung_task_init+0x0/0x53 returned 0 after 89 usecs
[    0.675703] calling  utsname_sysctl_init+0x0/0x14 @ 1
[    0.675845] initcall utsname_sysctl_init+0x0/0x14 returned 0 after 2 usecs
[    0.675986] calling  init_tracepoints+0x0/0x17 @ 1
[    0.676153] initcall init_tracepoints+0x0/0x17 returned 0 after 1 usecs
[    0.676295] calling  ftrace_mod_cmd_init+0x0/0x12 @ 1
[    0.676437] initcall ftrace_mod_cmd_init+0x0/0x12 returned 0 after 1 usecs
[    0.676580] calling  init_events+0x0/0x61 @ 1
[    0.676723] initcall init_events+0x0/0x61 returned 0 after 3 usecs
[    0.676863] calling  init_sched_switch_trace+0x0/0x12 @ 1
[    0.677015] initcall init_sched_switch_trace+0x0/0x12 returned 0 after 1 usecs
[    0.677268] calling  init_function_trace+0x0/0x3e @ 1
[    0.677410] initcall init_function_trace+0x0/0x3e returned 0 after 2 usecs
[    0.677551] calling  init_irqsoff_tracer+0x0/0x2c @ 1
[    0.677693] initcall init_irqsoff_tracer+0x0/0x2c returned 0 after 1 usecs
[    0.677833] calling  init_wakeup_tracer+0x0/0x22 @ 1
[    0.677974] initcall init_wakeup_tracer+0x0/0x22 returned 0 after 1 usecs
[    0.678139] calling  init_graph_trace+0x0/0x65 @ 1
[    0.678281] initcall init_graph_trace+0x0/0x65 returned 0 after 2 usecs
[    0.678421] calling  perf_event_sysfs_init+0x0/0x9b @ 1
[    0.679239] initcall perf_event_sysfs_init+0x0/0x9b returned 0 after 659 usecs
[    0.679480] calling  init_per_zone_wmark_min+0x0/0x67 @ 1
[    0.679974] initcall init_per_zone_wmark_min+0x0/0x67 returned 0 after 346 usecs
[    0.680246] calling  kswapd_init+0x0/0x20 @ 1
[    0.680465] initcall kswapd_init+0x0/0x20 returned 0 after 77 usecs
[    0.680606] calling  extfrag_debug_init+0x0/0x72 @ 1
[    0.680764] initcall extfrag_debug_init+0x0/0x72 returned 0 after 17 usecs
[    0.680905] calling  setup_vmstat+0x0/0xc5 @ 1
[    0.681098] initcall setup_vmstat+0x0/0xc5 returned 0 after 24 usecs
[    0.681238] calling  mm_sysfs_init+0x0/0x29 @ 1
[    0.681383] initcall mm_sysfs_init+0x0/0x29 returned 0 after 4 usecs
[    0.681523] calling  proc_vmalloc_init+0x0/0x25 @ 1
[    0.681668] initcall proc_vmalloc_init+0x0/0x25 returned 0 after 4 usecs
[    0.681808] calling  procswaps_init+0x0/0x22 @ 1
[    0.681952] initcall procswaps_init+0x0/0x22 returned 0 after 5 usecs
[    0.682126] calling  hugetlb_init+0x0/0x420 @ 1
[    0.682266] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.682418] initcall hugetlb_init+0x0/0x420 returned 0 after 148 usecs
[    0.682558] calling  slab_proc_init+0x0/0x25 @ 1
[    0.682702] initcall slab_proc_init+0x0/0x25 returned 0 after 5 usecs
[    0.682842] calling  slab_sysfs_init+0x0/0x102 @ 1
[    0.697868] initcall slab_sysfs_init+0x0/0x102 returned 0 after 14533 usecs
[    0.698023] calling  hugepage_init+0x0/0x116 @ 1
[    0.699101] initcall hugepage_init+0x0/0x116 returned 0 after 898 usecs
[    0.699241] calling  fcntl_init+0x0/0x2a @ 1
[    0.699562] initcall fcntl_init+0x0/0x2a returned 0 after 175 usecs
[    0.699702] calling  proc_filesystems_init+0x0/0x22 @ 1
[    0.699850] initcall proc_filesystems_init+0x0/0x22 returned 0 after 7 usecs
[    0.699990] calling  fsnotify_mark_init+0x0/0x3d @ 1
[    0.700582] initcall fsnotify_mark_init+0x0/0x3d returned 0 after 415 usecs
[    0.700723] calling  inotify_user_setup+0x0/0x70 @ 1
[    0.701213] initcall inotify_user_setup+0x0/0x70 returned 0 after 340 usecs
[    0.701353] calling  aio_setup+0x0/0xb0 @ 1
[    0.704467] initcall aio_setup+0x0/0xb0 returned 0 after 371 usecs
[    0.704608] calling  proc_locks_init+0x0/0x22 @ 1
[    0.704753] initcall proc_locks_init+0x0/0x22 returned 0 after 5 usecs
[    0.704894] calling  init_sys32_ioctl+0x0/0x28 @ 1
[    0.705125] initcall init_sys32_ioctl+0x0/0x28 returned 0 after 62 usecs
[    0.705266] calling  init_mbcache+0x0/0x14 @ 1
[    0.705409] initcall init_mbcache+0x0/0x14 returned 0 after 1 usecs
[    0.705549] calling  proc_cmdline_init+0x0/0x22 @ 1
[    0.705695] initcall proc_cmdline_init+0x0/0x22 returned 0 after 5 usecs
[    0.705836] calling  proc_consoles_init+0x0/0x22 @ 1
[    0.705980] initcall proc_consoles_init+0x0/0x22 returned 0 after 5 usecs
[    0.706147] calling  proc_cpuinfo_init+0x0/0x22 @ 1
[    0.706291] initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 4 usecs
[    0.706431] calling  proc_devices_init+0x0/0x22 @ 1
[    0.706576] initcall proc_devices_init+0x0/0x22 returned 0 after 5 usecs
[    0.706716] calling  proc_interrupts_init+0x0/0x22 @ 1
[    0.706861] initcall proc_interrupts_init+0x0/0x22 returned 0 after 4 usecs
[    0.707010] calling  proc_loadavg_init+0x0/0x22 @ 1
[    0.707168] initcall proc_loadavg_init+0x0/0x22 returned 0 after 5 usecs
[    0.707308] calling  proc_meminfo_init+0x0/0x22 @ 1
[    0.707453] initcall proc_meminfo_init+0x0/0x22 returned 0 after 4 usecs
[    0.707593] calling  proc_stat_init+0x0/0x22 @ 1
[    0.707738] initcall proc_stat_init+0x0/0x22 returned 0 after 4 usecs
[    0.707877] calling  proc_uptime_init+0x0/0x22 @ 1
[    0.708043] initcall proc_uptime_init+0x0/0x22 returned 0 after 6 usecs
[    0.708188] calling  proc_version_init+0x0/0x22 @ 1
[    0.708333] initcall proc_version_init+0x0/0x22 returned 0 after 5 usecs
[    0.708473] calling  proc_softirqs_init+0x0/0x22 @ 1
[    0.708618] initcall proc_softirqs_init+0x0/0x22 returned 0 after 5 usecs
[    0.708758] calling  proc_kcore_init+0x0/0xa9 @ 1
[    0.708908] initcall proc_kcore_init+0x0/0xa9 returned 0 after 10 usecs
[    0.709071] calling  proc_kmsg_init+0x0/0x25 @ 1
[    0.709220] initcall proc_kmsg_init+0x0/0x25 returned 0 after 5 usecs
[    0.709359] calling  proc_page_init+0x0/0x42 @ 1
[    0.709513] initcall proc_page_init+0x0/0x42 returned 0 after 14 usecs
[    0.709653] calling  configfs_init+0x0/0xb3 @ 1
[    0.710000] initcall configfs_init+0x0/0xb3 returned 0 after 200 usecs
[    0.710173] calling  init_devpts_fs+0x0/0x4c @ 1
[    0.710337] initcall init_devpts_fs+0x0/0x4c returned 0 after 23 usecs
[    0.710477] calling  init_ext3_fs+0x0/0x72 @ 1
[    0.710966] initcall init_ext3_fs+0x0/0x72 returned 0 after 338 usecs
[    0.711135] calling  init_ext2_fs+0x0/0x71 @ 1
[    0.711569] initcall init_ext2_fs+0x0/0x71 returned 0 after 286 usecs
[    0.711709] calling  journal_init+0x0/0x99 @ 1
[    0.712433] initcall journal_init+0x0/0x99 returned 0 after 570 usecs
[    0.712574] calling  init_ramfs_fs+0x0/0x12 @ 1
[    0.712715] initcall init_ramfs_fs+0x0/0x12 returned 0 after 1 usecs
[    0.712855] calling  init_hugetlbfs_fs+0x0/0x98 @ 1
[    0.713229] initcall init_hugetlbfs_fs+0x0/0x98 returned 0 after 225 usecs
[    0.713369] calling  ipc_init+0x0/0x23 @ 1
[    0.713514] msgmni has been set to 15944
[    0.713663] initcall ipc_init+0x0/0x23 returned 0 after 152 usecs
[    0.713803] calling  ipc_sysctl_init+0x0/0x14 @ 1
[    0.713945] initcall ipc_sysctl_init+0x0/0x14 returned 0 after 3 usecs
[    0.714119] calling  init_mqueue_fs+0x0/0xc8 @ 1
[    0.714460] initcall init_mqueue_fs+0x0/0xc8 returned 0 after 196 usecs
[    0.714600] calling  key_proc_init+0x0/0x33 @ 1
[    0.714746] initcall key_proc_init+0x0/0x33 returned 0 after 5 usecs
[    0.714885] calling  crypto_wq_init+0x0/0x36 @ 1
[    0.715117] initcall crypto_wq_init+0x0/0x36 returned 0 after 70 usecs
[    0.715258] calling  crypto_algapi_init+0x0/0xd @ 1
[    0.715404] initcall crypto_algapi_init+0x0/0xd returned 0 after 5 usecs
[    0.715544] calling  skcipher_module_init+0x0/0x36 @ 1
[    0.715685] initcall skcipher_module_init+0x0/0x36 returned 0 after 0 usecs
[    0.715826] calling  chainiv_module_init+0x0/0x12 @ 1
[    0.715967] initcall chainiv_module_init+0x0/0x12 returned 0 after 1 usecs
[    0.716140] calling  eseqiv_module_init+0x0/0x12 @ 1
[    0.716281] initcall eseqiv_module_init+0x0/0x12 returned 0 after 0 usecs
[    0.716421] calling  hmac_module_init+0x0/0x12 @ 1
[    0.716562] initcall hmac_module_init+0x0/0x12 returned 0 after 0 usecs
[    0.716702] calling  md5_mod_init+0x0/0x12 @ 1
[    0.716953] initcall md5_mod_init+0x0/0x12 returned 0 after 106 usecs
[    0.717120] calling  crypto_cbc_module_init+0x0/0x12 @ 1
[    0.717265] initcall crypto_cbc_module_init+0x0/0x12 returned 0 after 1 usecs
[    0.717406] calling  krng_mod_init+0x0/0x12 @ 1
[    0.717649] initcall krng_mod_init+0x0/0x12 returned 0 after 100 usecs
[    0.717790] calling  proc_genhd_init+0x0/0x3c @ 1
[    0.717940] initcall proc_genhd_init+0x0/0x3c returned 0 after 9 usecs
[    0.718108] calling  bsg_init+0x0/0x12e @ 1
[    0.718527] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.718770] initcall bsg_init+0x0/0x12e returned 0 after 510 usecs
[    0.718909] calling  noop_init+0x0/0x14 @ 1
[    0.719078] io scheduler noop registered
[    0.719218] initcall noop_init+0x0/0x14 returned 0 after 136 usecs
[    0.719357] calling  cfq_init+0x0/0x9e @ 1
[    0.719833] io scheduler cfq registered (default)
[    0.719973] initcall cfq_init+0x0/0x9e returned 0 after 464 usecs
[    0.720143] calling  percpu_counter_startup+0x0/0x19 @ 1
[    0.720285] initcall percpu_counter_startup+0x0/0x19 returned 0 after 1 usecs
[    0.720425] calling  pci_proc_init+0x0/0x6a @ 1
[    0.720735] initcall pci_proc_init+0x0/0x6a returned 0 after 166 usecs
[    0.720875] calling  pcie_portdrv_init+0x0/0x7a @ 1
[    0.721211] pcieport 0000:00:02.0: setting latency timer to 64
[    0.721621] initcall pcie_portdrv_init+0x0/0x7a returned 0 after 569 usecs
[    0.721762] calling  ioapic_init+0x0/0x1b @ 1
[    0.722040] initcall ioapic_init+0x0/0x1b returned 0 after 134 usecs
[    0.722180] calling  fb_console_init+0x0/0x11d @ 1
[    0.722456] initcall fb_console_init+0x0/0x11d returned 0 after 130 usecs
[    0.722596] calling  acpi_reserve_resources+0x0/0xeb @ 1
[    0.722742] initcall acpi_reserve_resources+0x0/0xeb returned 0 after 5 usecs
[    0.722883] calling  irqrouter_init_sysfs+0x0/0x38 @ 1
[    0.723277] initcall irqrouter_init_sysfs+0x0/0x38 returned 0 after 227 usecs
[    0.723418] calling  acpi_processor_init+0x0/0xcd @ 1
[    0.723557] ACPI: acpi_idle registered with cpuidle
[    0.723748] ACPI: processor limited to max C-state 1
[    0.724780] initcall acpi_processor_init+0x0/0xcd returned 0 after 1192 usecs
[    0.724921] calling  acpi_container_init+0x0/0x4a @ 1
[    0.731073] initcall acpi_container_init+0x0/0x4a returned 0 after 5841 usecs
[    0.731214] calling  acpi_thermal_init+0x0/0x42 @ 1
[    0.731541] initcall acpi_thermal_init+0x0/0x42 returned 0 after 180 usecs
[    0.731681] calling  pty_init+0x0/0x336 @ 1
[    0.731993] initcall pty_init+0x0/0x336 returned 0 after 168 usecs
[    0.732162] calling  sysrq_init+0x0/0x78 @ 1
[    0.732309] initcall sysrq_init+0x0/0x78 returned 0 after 8 usecs
[    0.732450] calling  rand_initialize+0x0/0x31 @ 1
[    0.732603] initcall rand_initialize+0x0/0x31 returned 0 after 12 usecs
[    0.732742] calling  hpet_init+0x0/0x6a @ 1
[    0.733301] initcall hpet_init+0x0/0x6a returned 0 after 406 usecs
[    0.733441] calling  agp_init+0x0/0x26 @ 1
[    0.733579] Linux agpgart interface v0.103
[    0.733718] initcall agp_init+0x0/0x26 returned 0 after 135 usecs
[    0.733858] calling  agp_amd64_mod_init+0x0/0x22 @ 1
[    0.734011] initcall agp_amd64_mod_init+0x0/0x22 returned -19 after 0 usecs
[    0.734170] calling  drm_core_init+0x0/0x132 @ 1
[    0.734456] [drm] Initialized drm 1.1.0 20060810
[    0.734596] initcall drm_core_init+0x0/0x132 returned 0 after 278 usecs
[    0.734735] calling  ttm_init+0x0/0x62 @ 1
[    0.735074] initcall ttm_init+0x0/0x62 returned 0 after 192 usecs
[    0.735213] calling  radeon_init+0x0/0xc1 @ 1
[    0.735352] [drm] radeon defaulting to userspace modesetting.
[    0.737476] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.737618] pci 0000:01:00.0: setting latency timer to 64
[    0.738116] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    0.738256] [drm] No driver support for vblank timestamp query.
[    0.738395] [drm] Initialized radeon 1.33.0 20080528 for 0000:01:00.0 on minor 0
[    0.738776] initcall radeon_init+0x0/0xc1 returned 0 after 3344 usecs
[    0.738917] calling  topology_sysfs_init+0x0/0x55 @ 1
[    0.739131] initcall topology_sysfs_init+0x0/0x55 returned 0 after 40 usecs
[    0.739272] calling  loop_init+0x0/0x1a3 @ 1
[    0.742187] loop: module loaded
[    0.742326] initcall loop_init+0x0/0x1a3 returned 0 after 2846 usecs
[    0.742466] calling  init_cryptoloop+0x0/0x2f @ 1
[    0.742607] initcall init_cryptoloop+0x0/0x2f returned 0 after 0 usecs
[    0.742747] calling  ide_init+0x0/0x7c @ 1
[    0.742885] Uniform Multi-Platform E-IDE driver
[    0.743287] initcall ide_init+0x0/0x7c returned 0 after 389 usecs
[    0.743427] calling  atiixp_ide_init+0x0/0x1b @ 1
[    0.743567] initcall atiixp_ide_init+0x0/0x1b returned 0 after 0 usecs
[    0.743707] calling  ide_scan_pcibus+0x0/0xd3 @ 1
[    0.743873] atiixp 0000:00:14.1: IDE controller (0x1002:0x439c rev 0x00)
[    0.744049] pci 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.744235] atiixp 0000:00:14.1: not 100% native mode: will probe irqs later
[    0.744378]     ide0: BM-DMA at 0xff00-0xff07
[    0.744525]     ide1: BM-DMA at 0xff08-0xff0f
[    0.744665] Probing IDE interface ide0...
[    1.012369] hda: MAXTOR 4K080H4, ATA DISK drive
[    1.480041] hdb: Optiarc DVD RW AD-7173A, ATAPI CD/DVD-ROM drive
[    1.480527] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[    1.480913] hda: UDMA/100 mode selected
[    1.481368] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[    1.481661] hdb: UDMA/66 mode selected
[    1.481958] Probing IDE interface ide1...
[    1.664833] Refined TSC clocksource calibration: 3007.805 MHz.
[    1.664978] Switching to clocksource tsc
[    2.005194] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    2.034292] ide1 at 0x170-0x177,0x376 on irq 15
[    2.035210] initcall ide_scan_pcibus+0x0/0xd3 returned 0 after 1261091 usecs
[    2.035352] calling  ide_gd_init+0x0/0x20 @ 1
[    2.035490] ide-gd driver 1.18
[    2.035667] hda: max request size: 128KiB
[    2.036302] hda: 156301488 sectors (80026 MB) w/2000KiB Cache, CHS=65535/16/63
[    2.037166] hda: cache flushes supported
[    2.067400]  hda: hda1 hda2
[    2.069335] initcall ide_gd_init+0x0/0x20 returned 0 after 33047 usecs
[    2.069480] calling  ide_cdrom_init+0x0/0x20 @ 1
[    2.069618] ide-cd driver 5.00
[    2.070397] ide-cd: hdb: ATAPI 48X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
[    2.073400] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.080303] initcall ide_cdrom_init+0x0/0x20 returned 0 after 10429 usecs
[    2.080446] calling  idetape_init+0x0/0xb5 @ 1
[    2.080779] initcall idetape_init+0x0/0xb5 returned 0 after 188 usecs
[    2.080919] calling  init_sd+0x0/0x142 @ 1
[    2.081419] initcall init_sd+0x0/0x142 returned 0 after 343 usecs
[    2.081559] calling  ahci_init+0x0/0x1b @ 1
[    2.081712] ahci 0000:00:11.0: version 3.0
[    2.081868] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    2.082126] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    2.082368] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
[    2.084659] scsi0 : ahci
[    2.085385] scsi1 : ahci
[    2.085825] scsi2 : ahci
[    2.086263] scsi3 : ahci
[    2.086662] ata1: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ff900 irq 22
[    2.086905] ata2: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ff980 irq 22
[    2.087153] ata3: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ffa00 irq 22
[    2.087401] ata4: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ffa80 irq 22
[    2.087673] calling  1_async_port_probe+0x0/0xb0 @ 5
[    2.087763] calling  2_async_port_probe+0x0/0xb0 @ 18
[    2.087828] calling  3_async_port_probe+0x0/0xb0 @ 662
[    2.087875] calling  4_async_port_probe+0x0/0xb0 @ 663
[    2.088027] initcall ahci_init+0x0/0x1b returned 0 after 6179 usecs
[    2.088029] calling  net_olddevs_init+0x0/0x9e @ 1
[    2.088034] initcall net_olddevs_init+0x0/0x9e returned 0 after 2 usecs
[    2.088036] calling  rtl8139_init_module+0x0/0x1b @ 1
[    2.088055] 8139too: 8139too Fast Ethernet driver 0.9.28
[    2.088084] 8139too 0000:02:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    2.089088] 8139too 0000:02:06.0: eth0: RealTek RTL8139 at 0xffffc9000002ac00, 00:0b:2b:01:34:65, IRQ 21
[    2.089190] initcall rtl8139_init_module+0x0/0x1b returned 0 after 1123 usecs
[    2.089192] calling  init_netconsole+0x0/0x234 @ 1
[    2.089940] console [netcon0] enabled
[    2.090098] netconsole: network logging started
[    2.090242] initcall init_netconsole+0x0/0x234 returned 0 after 1022 usecs
[    2.090382] calling  cdrom_init+0x0/0x6a @ 1
[    2.090520] initcall cdrom_init+0x0/0x6a returned 0 after 0 usecs
[    2.090660] calling  ehci_hcd_init+0x0/0x78 @ 1
[    2.090798] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.090965] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    2.091135] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    2.091317] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[    2.096309] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.096589] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[    2.096842] ehci_hcd 0000:00:12.2: debug port 1
[    2.097049] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe9ff000
[    2.103300] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    2.103537] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.103677] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.103918] usb usb1: Product: EHCI Host Controller
[    2.104064] usb usb1: Manufacturer: Linux 2.6.38-rc4-00001-g1e554e3-dirty ehci_hcd
[    2.104304] usb usb1: SerialNumber: 0000:00:12.2
[    2.104840] hub 1-0:1.0: USB hub found
[    2.104989] hub 1-0:1.0: 6 ports detected
[    2.105324] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    2.105488] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    2.105640] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[    2.114309] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.114587] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[    2.114841] ehci_hcd 0000:00:13.2: debug port 1
[    2.115044] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe9fa800
[    2.121299] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    2.121522] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.121662] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.121903] usb usb2: Product: EHCI Host Controller
[    2.122050] usb usb2: Manufacturer: Linux 2.6.38-rc4-00001-g1e554e3-dirty ehci_hcd
[    2.122291] usb usb2: SerialNumber: 0000:00:13.2
[    2.122838] hub 2-0:1.0: USB hub found
[    2.122984] hub 2-0:1.0: 6 ports detected
[    2.123437] initcall ehci_hcd_init+0x0/0x78 returned 0 after 31870 usecs
[    2.123578] calling  usb_stor_init+0x0/0x46 @ 1
[    2.123716] Initializing USB Mass Storage driver...
[    2.124035] usbcore: registered new interface driver usb-storage
[    2.124174] USB Mass Storage support registered.
[    2.124313] initcall usb_stor_init+0x0/0x46 returned 0 after 582 usecs
[    2.124453] calling  i8042_init+0x0/0x39f @ 1
[    2.132590] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    2.132734] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    2.133262] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.133600] initcall i8042_init+0x0/0x39f returned 0 after 8793 usecs
[    2.133741] calling  mousedev_init+0x0/0x8e @ 1
[    2.134149] mousedev: PS/2 mouse device common for all mice
[    2.134290] initcall mousedev_init+0x0/0x8e returned 0 after 399 usecs
[    2.134430] calling  evdev_init+0x0/0x12 @ 1
[    2.134569] initcall evdev_init+0x0/0x12 returned 0 after 0 usecs
[    2.134709] calling  atkbd_init+0x0/0x27 @ 1
[    2.135043] initcall atkbd_init+0x0/0x27 returned 0 after 189 usecs
[    2.135183] calling  cmos_init+0x0/0x6a @ 1
[    2.135346] rtc_cmos 00:03: RTC can wake from S4
[    2.144563] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    2.144735] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    2.144981] initcall cmos_init+0x0/0x6a returned 0 after 9429 usecs
[    2.145147] calling  init_ladder+0x0/0x12 @ 1
[    2.145286] cpuidle: using governor ladder
[    2.145425] initcall init_ladder+0x0/0x12 returned 0 after 135 usecs
[    2.145564] calling  init_menu+0x0/0x12 @ 1
[    2.145702] cpuidle: using governor menu
[    2.145840] initcall init_menu+0x0/0x12 returned 0 after 134 usecs
[    2.145980] calling  hid_init+0x0/0x4d @ 1
[    2.146280] initcall hid_init+0x0/0x4d returned 0 after 151 usecs
[    2.146419] calling  a4_init+0x0/0x1b @ 1
[    2.146656] initcall a4_init+0x0/0x1b returned 0 after 95 usecs
[    2.146795] calling  apple_init+0x0/0x39 @ 1
[    2.147155] initcall apple_init+0x0/0x39 returned 0 after 216 usecs
[    2.147295] calling  belkin_init+0x0/0x1b @ 1
[    2.147530] initcall belkin_init+0x0/0x1b returned 0 after 93 usecs
[    2.147682] calling  ch_init+0x0/0x1b @ 1
[    2.147914] initcall ch_init+0x0/0x1b returned 0 after 91 usecs
[    2.148062] calling  ch_init+0x0/0x1b @ 1
[    2.148300] initcall ch_init+0x0/0x1b returned 0 after 95 usecs
[    2.148439] calling  cp_init+0x0/0x1b @ 1
[    2.148675] initcall cp_init+0x0/0x1b returned 0 after 95 usecs
[    2.148815] calling  ez_init+0x0/0x1b @ 1
[    2.149055] initcall ez_init+0x0/0x1b returned 0 after 99 usecs
[    2.149195] calling  ks_init+0x0/0x1b @ 1
[    2.149426] initcall ks_init+0x0/0x1b returned 0 after 90 usecs
[    2.149565] calling  kye_init+0x0/0x1b @ 1
[    2.149799] initcall kye_init+0x0/0x1b returned 0 after 92 usecs
[    2.149938] calling  lg_init+0x0/0x1b @ 1
[    2.150180] initcall lg_init+0x0/0x1b returned 0 after 93 usecs
[    2.150320] calling  ms_init+0x0/0x1b @ 1
[    2.150550] initcall ms_init+0x0/0x1b returned 0 after 89 usecs
[    2.150702] calling  mr_init+0x0/0x1b @ 1
[    2.150938] initcall mr_init+0x0/0x1b returned 0 after 95 usecs
[    2.151086] calling  hid_init+0x0/0x78 @ 1
[    2.151443] usbcore: registered new interface driver usbhid
[    2.151581] usbhid: USB HID core driver
[    2.151720] initcall hid_init+0x0/0x78 returned 0 after 482 usecs
[    2.151859] calling  alsa_timer_init+0x0/0x17c @ 1
[    2.152177] initcall alsa_timer_init+0x0/0x17c returned 0 after 174 usecs
[    2.152318] calling  alsa_pcm_init+0x0/0x6c @ 1
[    2.152463] initcall alsa_pcm_init+0x0/0x6c returned 0 after 6 usecs
[    2.152604] calling  snd_mem_init+0x0/0x2c @ 1
[    2.152746] initcall snd_mem_init+0x0/0x2c returned 0 after 4 usecs
[    2.152886] calling  patch_realtek_init+0x0/0x12 @ 1
[    2.153032] initcall patch_realtek_init+0x0/0x12 returned 0 after 0 usecs
[    2.153173] calling  patch_cmedia_init+0x0/0x12 @ 1
[    2.153428] initcall patch_cmedia_init+0x0/0x12 returned 0 after 0 usecs
[    2.153578] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.153881] calling  patch_analog_init+0x0/0x12 @ 1
[    2.154042] initcall patch_analog_init+0x0/0x12 returned 0 after 0 usecs
[    2.154183] calling  patch_sigmatel_init+0x0/0x12 @ 1
[    2.154323] initcall patch_sigmatel_init+0x0/0x12 returned 0 after 0 usecs
[    2.154463] calling  patch_si3054_init+0x0/0x12 @ 1
[    2.154603] initcall patch_si3054_init+0x0/0x12 returned 0 after 0 usecs
[    2.154742] calling  patch_cirrus_init+0x0/0x12 @ 1
[    2.154881] initcall patch_cirrus_init+0x0/0x12 returned 0 after 0 usecs
[    2.155028] calling  patch_ca0110_init+0x0/0x12 @ 1
[    2.155167] initcall patch_ca0110_init+0x0/0x12 returned 0 after 0 usecs
[    2.155308] calling  patch_conexant_init+0x0/0x12 @ 1
[    2.155447] initcall patch_conexant_init+0x0/0x12 returned 0 after 0 usecs
[    2.155587] calling  patch_via_init+0x0/0x12 @ 1
[    2.155726] initcall patch_via_init+0x0/0x12 returned 0 after 0 usecs
[    2.155866] calling  patch_hdmi_init+0x0/0x12 @ 1
[    2.156009] initcall patch_hdmi_init+0x0/0x12 returned 0 after 0 usecs
[    2.156152] calling  alsa_card_azx_init+0x0/0x1b @ 1
[    2.156331] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.169144] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    2.171967] HDA Intel 0000:01:00.1: setting latency timer to 64
[    2.177990] initcall alsa_card_azx_init+0x0/0x1b returned 0 after 21185 usecs
[    2.178142] calling  alsa_sound_last_init+0x0/0x6f @ 1
[    2.178281] ALSA device list:
[    2.178418]   #0: HDA ATI SB at 0xfe9f4000 irq 16
[    2.178556]   #1: HDA ATI HDMI at 0xfeaec000 irq 19
[    2.178696] initcall alsa_sound_last_init+0x0/0x6f returned 0 after 405 usecs
[    2.178838] calling  flow_cache_init_global+0x0/0x12b @ 1
[    2.179260] initcall flow_cache_init_global+0x0/0x12b returned 0 after 274 usecs
[    2.179502] calling  blackhole_module_init+0x0/0x12 @ 1
[    2.179643] initcall blackhole_module_init+0x0/0x12 returned 0 after 0 usecs
[    2.179784] calling  sysctl_ipv4_init+0x0/0x8b @ 1
[    2.179934] initcall sysctl_ipv4_init+0x0/0x8b returned 0 after 10 usecs
[    2.180082] calling  init_syncookies+0x0/0x19 @ 1
[    2.180241] initcall init_syncookies+0x0/0x19 returned 0 after 19 usecs
[    2.180381] calling  xfrm4_beet_init+0x0/0x17 @ 1
[    2.180521] initcall xfrm4_beet_init+0x0/0x17 returned 0 after 1 usecs
[    2.180663] calling  ipv4_netfilter_init+0x0/0x17 @ 1
[    2.180803] initcall ipv4_netfilter_init+0x0/0x17 returned 0 after 1 usecs
[    2.180944] calling  cubictcp_register+0x0/0x5c @ 1
[    2.181090] TCP cubic registered
[    2.181228] initcall cubictcp_register+0x0/0x5c returned 0 after 135 usecs
[    2.181369] calling  init_dns_resolver+0x0/0x108 @ 1
[    2.181508] Registering the dns_resolver key type
[    2.181658] initcall init_dns_resolver+0x0/0x108 returned 0 after 146 usecs
[    2.181800] calling  mcheck_debugfs_init+0x0/0x3c @ 1
[    2.181952] initcall mcheck_debugfs_init+0x0/0x3c returned 0 after 12 usecs
[    2.182099] calling  severities_debugfs_init+0x0/0x3c @ 1
[    2.182243] initcall severities_debugfs_init+0x0/0x3c returned 0 after 4 usecs
[    2.182485] calling  hpet_insert_resource+0x0/0x23 @ 1
[    2.182626] initcall hpet_insert_resource+0x0/0x23 returned 0 after 1 usecs
[    2.182767] calling  lapic_insert_resource+0x0/0x3f @ 1
[    2.182907] initcall lapic_insert_resource+0x0/0x3f returned 0 after 0 usecs
[    2.183056] calling  io_apic_bug_finalize+0x0/0x1b @ 1
[    2.183196] initcall io_apic_bug_finalize+0x0/0x1b returned 0 after 0 usecs
[    2.183336] calling  check_early_ioremap_leak+0x0/0x65 @ 1
[    2.183476] initcall check_early_ioremap_leak+0x0/0x65 returned 0 after 0 usecs
[    2.183718] calling  pat_memtype_list_init+0x0/0x32 @ 1
[    2.183862] initcall pat_memtype_list_init+0x0/0x32 returned 0 after 4 usecs
[    2.184006] calling  sched_init_debug+0x0/0x24 @ 1
[    2.184153] initcall sched_init_debug+0x0/0x24 returned 0 after 4 usecs
[    2.184294] calling  init_oops_id+0x0/0x36 @ 1
[    2.184433] initcall init_oops_id+0x0/0x36 returned 0 after 0 usecs
[    2.184573] calling  printk_late_init+0x0/0x50 @ 1
[    2.184713] initcall printk_late_init+0x0/0x50 returned 0 after 0 usecs
[    2.184854] calling  pm_qos_power_init+0x0/0xca @ 1
[    2.185400] initcall pm_qos_power_init+0x0/0xca returned 0 after 395 usecs
[    2.185542] calling  software_resume+0x0/0x196 @ 1
[    2.186522] initcall software_resume+0x0/0x196 returned -22 after 814 usecs
[    2.186667] initcall software_resume+0x0/0x196 returned with error code -22 
[    2.186810] calling  clear_boot_tracer+0x0/0x2d @ 1
[    2.186949] initcall clear_boot_tracer+0x0/0x2d returned 0 after 0 usecs
[    2.187103] calling  max_swapfiles_check+0x0/0x8 @ 1
[    2.187242] initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs
[    2.187383] calling  set_recommended_min_free_kbytes+0x0/0x87 @ 1
[    2.187868] initcall set_recommended_min_free_kbytes+0x0/0x87 returned 0 after 337 usecs
[    2.188119] calling  random32_reseed+0x0/0xb3 @ 1
[    2.188272] initcall random32_reseed+0x0/0xb3 returned 0 after 14 usecs
[    2.188413] calling  pci_resource_alignment_sysfs_init+0x0/0x19 @ 1
[    2.188559] initcall pci_resource_alignment_sysfs_init+0x0/0x19 returned 0 after 5 usecs
[    2.188801] calling  pci_sysfs_init+0x0/0x51 @ 1
[    2.189248] initcall pci_sysfs_init+0x0/0x51 returned 0 after 299 usecs
[    2.189390] calling  seqgen_init+0x0/0xf @ 1
[    2.189537] initcall seqgen_init+0x0/0xf returned 0 after 8 usecs
[    2.189678] calling  scsi_complete_async_scans+0x0/0x10d @ 1
[    2.189818] initcall scsi_complete_async_scans+0x0/0x10d returned 0 after 0 usecs
[    2.190066] calling  rtc_hctosys+0x0/0x10d @ 1
[    2.190250] rtc_cmos 00:03: setting system clock to 2011-02-08 09:55:56 UTC (1297158956)
[    2.190493] initcall rtc_hctosys+0x0/0x10d returned 0 after 281 usecs
[    2.190633] calling  memmap_init+0x0/0x3b @ 1
[    2.190831] initcall memmap_init+0x0/0x3b returned 0 after 56 usecs
[    2.190971] calling  pci_mmcfg_late_insert_resources+0x0/0x66 @ 1
[    2.191120] initcall pci_mmcfg_late_insert_resources+0x0/0x66 returned 0 after 1 usecs
[    2.191362] calling  tcp_congestion_default+0x0/0x12 @ 1
[    2.191502] initcall tcp_congestion_default+0x0/0x12 returned 0 after 0 usecs
[    2.191643] calling  initialize_hashrnd+0x0/0x19 @ 1
[    2.191785] initcall initialize_hashrnd+0x0/0x19 returned 0 after 2 usecs
[    2.192026] async_waiting @ 1
[    2.392356] ata3: SATA link down (SStatus 0 SControl 300)
[    2.392536] async_waiting @ 662
[    2.394325] ata1: SATA link down (SStatus 0 SControl 300)
[    2.394805] async_waiting @ 5
[    2.394946] async_continuing @ 5 after 0 usec
[    2.395105] initcall 1_async_port_probe+0x0/0xb0 returned 0 after 298025 usecs
[    2.458403] usb 1-3: new high speed USB device using ehci_hcd and address 3
[    2.547428] ata4: softreset failed (device not ready)
[    2.547573] ata4: applying SB600 PMP SRST workaround and retrying
[    2.547730] ata2: softreset failed (device not ready)
[    2.547870] ata2: applying SB600 PMP SRST workaround and retrying
[    2.573444] usb 1-3: New USB device found, idVendor=0424, idProduct=2504
[    2.573589] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.575614] hub 1-3:1.0: USB hub found
[    2.576191] hub 1-3:1.0: 2 ports detected
[    2.702272] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.703274] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.704448] ata2.00: ATA-8: WDC WD2500AAJS-62B4A0, 01.03A01, max UDMA/133
[    2.704589] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.706225] ata2.00: configured for UDMA/133
[    2.706396] async_waiting @ 18
[    2.706538] async_continuing @ 18 after 0 usec
[    2.706963] scsi 1:0:0:0: Direct-Access     ATA      WDC WD2500AAJS-6 01.0 PQ: 0 ANSI: 5
[    2.707761] calling  5_sd_probe_async+0x0/0x1c4 @ 5
[    2.707980] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    2.708143] initcall 2_async_port_probe+0x0/0xb0 returned 0 after 605833 usecs
[    2.708155] async_continuing @ 662 after 308082 usec
[    2.708161] initcall 3_async_port_probe+0x0/0xb0 returned 0 after 605788 usecs
[    2.708799] ata4.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
[    2.708802] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.709352] sd 1:0:0:0: [sda] Write Protect is off
[    2.709492] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.709668] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.715437] ata4.00: configured for UDMA/133
[    2.715595] async_waiting @ 663
[    2.715737] async_continuing @ 663 after 0 usec
[    2.716089] scsi 3:0:0:0: Direct-Access     ATA      SAMSUNG HD103UJ  1AA0 PQ: 0 ANSI: 5
[    2.716905] calling  6_sd_probe_async+0x0/0x1c4 @ 662
[    2.717154] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    2.717246] initcall 4_async_port_probe+0x0/0xb0 returned 0 after 614614 usecs
[    2.717259] async_continuing @ 1 after 512784 usec
[    2.717261] async_waiting @ 1
[    2.718089] sd 3:0:0:0: [sdb] Write Protect is off
[    2.718232] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.718424] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.728715]  sdb: sdb1
[    2.729566] sd 3:0:0:0: [sdb] Attached SCSI disk
[    2.729713] initcall 6_sd_probe_async+0x0/0x1c4 returned 0 after 12359 usecs
[    2.755321]  sda: sda1 sda2
[    2.756437] sd 1:0:0:0: [sda] Attached SCSI disk
[    2.756583] initcall 5_sd_probe_async+0x0/0x1c4 returned 0 after 47534 usecs
[    2.756749] async_continuing @ 1 after 38558 usec
[    2.795375] EXT3-fs: barriers not enabled
[    2.812855] kjournald starting.  Commit interval 5 seconds
[    2.812942] EXT3-fs (sda1): mounted filesystem with writeback data mode
[    2.812976] VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
[    2.813024] async_waiting @ 1
[    2.813026] async_continuing @ 1 after 0 usec
[    2.816055] Freeing unused kernel memory: 2344k freed
[    2.852465] usb 1-3.1: new high speed USB device using ehci_hcd and address 4
[    2.941713] usb 1-3.1: New USB device found, idVendor=05ac, idProduct=1263
[    2.941858] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.942107] usb 1-3.1: Product: iPod
[    2.942245] usb 1-3.1: Manufacturer: Apple Inc.
[    2.942383] usb 1-3.1: SerialNumber: 000A27001D8212A9
[    2.951100] scsi4 : usb-storage 1-3.1:1.0
[    3.953821] scsi 4:0:0:0: Direct-Access     Apple    iPod             1.62 PQ: 0 ANSI: 0
[    3.958924] sd 4:0:0:0: [sdc] Spinning up disk...
[    4.713033] calling  ohci_hcd_mod_init+0x0/0x59 [ohci_hcd] @ 869
[    4.713312] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.713482] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.713664] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    4.713824] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[    4.718094] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe9fe000
[    4.773379] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    4.776063] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.776305] usb usb3: Product: OHCI Host Controller
[    4.776444] usb usb3: Manufacturer: Linux 2.6.38-rc4-00001-g1e554e3-dirty ohci_hcd
[    4.776685] usb usb3: SerialNumber: 0000:00:12.0
[    4.777038] hub 3-0:1.0: USB hub found
[    4.777190] hub 3-0:1.0: 3 ports detected
[    4.777513] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.777707] ohci_hcd 0000:00:12.1: OHCI Host Controller
[    4.777865] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[    4.786368] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe9fd000
[    4.842406] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    4.842551] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.842797] usb usb4: Product: OHCI Host Controller
[    4.842937] usb usb4: Manufacturer: Linux 2.6.38-rc4-00001-g1e554e3-dirty ohci_hcd
[    4.843184] usb usb4: SerialNumber: 0000:00:12.1
[    4.843537] hub 4-0:1.0: USB hub found
[    4.843688] hub 4-0:1.0: 3 ports detected
[    4.844067] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    4.844237] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    4.844399] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[    4.851331] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe9fc000
[    4.906382] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    4.906527] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.906768] usb usb5: Product: OHCI Host Controller
[    4.906907] usb usb5: Manufacturer: Linux 2.6.38-rc4-00001-g1e554e3-dirty ohci_hcd
[    4.907152] usb usb5: SerialNumber: 0000:00:13.0
[    4.907502] hub 5-0:1.0: USB hub found
[    4.907653] hub 5-0:1.0: 3 ports detected
[    4.907976] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    4.908152] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    4.908307] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[    4.913325] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe9fb000
[    4.968373] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    4.968578] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.968822] usb usb6: Product: OHCI Host Controller
[    4.968961] usb usb6: Manufacturer: Linux 2.6.38-rc4-00001-g1e554e3-dirty ohci_hcd
[    4.969209] usb usb6: SerialNumber: 0000:00:13.1
[    4.969582] hub 6-0:1.0: USB hub found
[    4.969732] hub 6-0:1.0: 3 ports detected
[    4.970094] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    4.970263] ohci_hcd 0000:00:14.5: OHCI Host Controller
[    4.970423] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[    4.977333] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe9f9000
[    5.032372] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    5.032517] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.032758] usb usb7: Product: OHCI Host Controller
[    5.032897] usb usb7: Manufacturer: Linux 2.6.38-rc4-00001-g1e554e3-dirty ohci_hcd
[    5.033142] usb usb7: SerialNumber: 0000:00:14.5
[    5.033484] hub 7-0:1.0: USB hub found
[    5.033640] hub 7-0:1.0: 2 ports detected
[    5.033992] initcall ohci_hcd_mod_init+0x0/0x59 [ohci_hcd] returned 0 after 313161 usecs
[    5.090323] usb 3-1: new low speed USB device using ohci_hcd and address 2
[    5.120737] calling  k10temp_init+0x0/0x20 [k10temp] @ 881
[    5.120911] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[    5.121217] initcall k10temp_init+0x0/0x20 [k10temp] returned 0 after 324 usecs
[    5.208308] .ready
[    5.210308] sd 4:0:0:0: [sdc] 3944897 4096-byte logical blocks: (16.1 GB/15.0 GiB)
[    5.212322] sd 4:0:0:0: [sdc] Write Protect is off
[    5.212465] sd 4:0:0:0: [sdc] Mode Sense: 68 00 00 08
[    5.214299] sd 4:0:0:0: [sdc] No Caching mode page present
[    5.214439] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[    5.216568] sd 4:0:0:0: [sdc] 3944897 4096-byte logical blocks: (16.1 GB/15.0 GiB)
[    5.220643] sd 4:0:0:0: [sdc] No Caching mode page present
[    5.220787] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[    5.222420]  sdc: sdc1
[    5.224768] sd 4:0:0:0: [sdc] 3944897 4096-byte logical blocks: (16.1 GB/15.0 GiB)
[    5.226520] sd 4:0:0:0: [sdc] No Caching mode page present
[    5.226662] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[    5.226805] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[    5.229168] usb 3-1: New USB device found, idVendor=046d, idProduct=c018
[    5.229313] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.229456] usb 3-1: Product: USB Optical Mouse
[    5.229596] usb 3-1: Manufacturer: Logitech
[    5.236538] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input1
[    5.236943] generic-usb 0003:046D:C018.0001: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-1/input0
[    5.523367] calling  serial8250_init+0x0/0x183 [8250] @ 857
[    5.523512] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    5.544301] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    5.558081] calling  edac_init+0x0/0x6f [edac_core] @ 879
[    5.558224] EDAC MC: Ver: 2.1.0 Feb  8 2011
[    5.558586] initcall edac_init+0x0/0x6f [edac_core] returned 0 after 344 usecs
[    5.573736] calling  amd64_edac_init+0x0/0x1af [amd64_edac_mod] @ 879
[    5.573880] EDAC amd64_edac: v3.3.0
[    5.574062] EDAC amd64: DRAM ECC disabled.
[    5.574205] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[    5.574206]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[    5.574207]  (Note that use of the override may cause unknown side effects.)
[    5.574915] initcall amd64_edac_init+0x0/0x1af [amd64_edac_mod] returned -19 after 1008 usecs
[    5.608370] initcall serial8250_init+0x0/0x183 [8250] returned 0 after 82863 usecs
[    5.609126] calling  serial8250_pnp_init+0x0/0x12 [8250_pnp] @ 903
[    5.629995] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    5.637092] initcall serial8250_pnp_init+0x0/0x12 [8250_pnp] returned 0 after 27165 usecs
[    7.613950] Adding 16016800k swap on /dev/sda2.  Priority:-1 extents:1 across:16016800k 
[    7.618429] Adding 15647304k swap on /dev/hda2.  Priority:-2 extents:1 across:15647304k 
[    7.796997] EXT3-fs (sda1): using internal journal
[    8.188938] EXT3-fs: barriers not enabled
[    8.198080] kjournald starting.  Commit interval 5 seconds
[    8.198314] EXT3-fs (sdb1): warning: mounting fs with errors, running e2fsck is recommended
[    8.199167] EXT3-fs (sdb1): using internal journal
[    8.199310] EXT3-fs (sdb1): mounted filesystem with writeback data mode
[    8.255765] calling  init_fat_fs+0x0/0x4f [fat] @ 1250
[    8.256136] initcall init_fat_fs+0x0/0x4f [fat] returned 0 after 215 usecs
[    8.285917] calling  init_vfat_fs+0x0/0x12 [vfat] @ 1250
[    8.286073] initcall init_vfat_fs+0x0/0x12 [vfat] returned 0 after 4 usecs
[    9.201795] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[    9.921802] calling  inet6_init+0x0/0x2a6 [ipv6] @ 1357
[    9.922861] NET: Registered protocol family 10
[    9.923789] initcall inet6_init+0x0/0x2a6 [ipv6] returned 0 after 1787 usecs
[   10.427592] calling  fuse_init+0x0/0x141 [fuse] @ 1449
[   10.427739] fuse init (API version 7.16)
[   10.428261] initcall fuse_init+0x0/0x141 [fuse] returned 0 after 504 usecs
[   10.982988] calling  irqfd_module_init+0x0/0x36 [kvm] @ 1514
[   10.983221] initcall irqfd_module_init+0x0/0x36 [kvm] returned 0 after 65 usecs
[   11.034499] calling  init_misc_binfmt+0x0/0x45 [binfmt_misc] @ 1532
[   11.034653] initcall init_misc_binfmt+0x0/0x45 [binfmt_misc] returned 0 after 5 usecs
[   11.106068] calling  svm_init+0x0/0x23 [kvm_amd] @ 1514
[   11.106663] kvm: Nested Virtualization enabled
[   11.106806] kvm: Nested Paging enabled
[   11.107528] initcall svm_init+0x0/0x23 [kvm_amd] returned 0 after 1281 usecs
[   15.261422] calling  xt_init+0x0/0x16c [x_tables] @ 1785
[   15.261450] initcall xt_init+0x0/0x16c [x_tables] returned 0 after 21 usecs
[   15.295872] calling  ip_tables_init+0x0/0xaa [ip_tables] @ 1785
[   15.295899] ip_tables: (C) 2000-2006 Netfilter Core Team
[   15.295904] initcall ip_tables_init+0x0/0xaa [ip_tables] returned 0 after 26 usecs
[   15.297098] calling  cpufreq_stats_init+0x0/0xad [cpufreq_stats] @ 1794
[   15.297108] initcall cpufreq_stats_init+0x0/0xad [cpufreq_stats] returned 0 after 5 usecs
[   15.331572] calling  iptable_filter_init+0x0/0x6f [iptable_filter] @ 1796
[   15.331607] initcall iptable_filter_init+0x0/0x6f [iptable_filter] returned 0 after 29 usecs
[   15.339346] calling  cpufreq_gov_dbs_init+0x0/0x6b [cpufreq_conservative] @ 1799
[   15.339460] initcall cpufreq_gov_dbs_init+0x0/0x6b [cpufreq_conservative] returned 0 after 100 usecs
[   15.375812] calling  ip6_tables_init+0x0/0xaa [ip6_tables] @ 1809
[   15.375841] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   15.375845] initcall ip6_tables_init+0x0/0xaa [ip6_tables] returned 0 after 27 usecs
[   15.386937] calling  cpufreq_gov_userspace_init+0x0/0x12 [cpufreq_userspace] @ 1808
[   15.386944] initcall cpufreq_gov_userspace_init+0x0/0x12 [cpufreq_userspace] returned 0 after 1 usecs
[   15.395814] calling  ip6table_filter_init+0x0/0x6f [ip6table_filter] @ 1811
[   15.395848] initcall ip6table_filter_init+0x0/0x6f [ip6table_filter] returned 0 after 29 usecs
[   15.702456] calling  cpufreq_gov_powersave_init+0x0/0x12 [cpufreq_powersave] @ 1814
[   15.702462] initcall cpufreq_gov_powersave_init+0x0/0x12 [cpufreq_powersave] returned 0 after 1 usecs
[   15.811599] calling  cpufreq_gov_dbs_init+0x0/0xe8 [cpufreq_ondemand] @ 1818
[   15.811734] initcall cpufreq_gov_dbs_init+0x0/0xe8 [cpufreq_ondemand] returned 0 after 121 usecs
[   15.885083] calling  powernowk8_init+0x0/0x18a [powernow_k8] @ 1839
[   15.885123] powernow-k8: Found 1 AMD Phenom(tm) II X4 940 Processor (4 cpu cores) (version 2.20.00)
[   15.885278] powernow-k8:    0 : pstate 0 (3000 MHz)
[   15.885280] powernow-k8:    1 : pstate 1 (2300 MHz)
[   15.885282] powernow-k8:    2 : pstate 2 (1800 MHz)
[   15.885284] powernow-k8:    3 : pstate 3 (800 MHz)
[   15.887557] initcall powernowk8_init+0x0/0x18a [powernow_k8] returned 0 after 2409 usecs
[   20.156269] sshd (1961): /proc/1961/oom_adj is deprecated, please use /proc/1961/oom_score_adj instead.
[   20.597589] eth0: no IPv6 routers present
[   25.814180] [drm] Setting GART location based on new memory map
[   25.814479] [drm] Loading RV635 CP Microcode
[   25.844578] [drm] Resetting GPU
[   25.844636] [drm] writeback test succeeded in 1 usecs
[   25.849949] HDMI hot plug event: Pin=3 Presence_Detect=0 ELD_Valid=0
[ 3281.785334] calling  msr_init+0x0/0x14f [msr] @ 8067
[ 3281.786624] initcall msr_init+0x0/0x14f [msr] returned 0 after 1241 usecs

[-- Attachment #3: config --]
[-- Type: text/plain, Size: 62811 bytes --]

#
# Automatically generated make config: don't edit
# Linux/x86_64 2.6.38-rc3 Kernel Configuration
# Sun Feb  6 11:53:45 2011
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
# CONFIG_KTIME_SCALAR is not set
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_GENERIC_HARDIRQS_NO_DEPRECATED is not set
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
# CONFIG_AUTO_IRQ_AFFINITY is not set
# CONFIG_IRQ_PER_CPU is not set
# CONFIG_HARDIRQS_SW_RESEND is not set
# CONFIG_SPARSE_IRQ is not set

#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=21
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_CGROUPS is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EXPERT is not set
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_X86_MPPARSE is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
CONFIG_MK8=y
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_CMPXCHG_LOCAL=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
# CONFIG_AMD_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not set
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=4
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=m
# CONFIG_MICROCODE_INTEL is not set
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION="/dev/sda2"
# CONFIG_PM_RUNTIME is not set
CONFIG_PM_OPS=y
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_POWER_METER is not set
# CONFIG_ACPI_EC_DEBUGFS is not set
# CONFIG_ACPI_PROC_EVENT is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_FAN is not set
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_APEI is not set
# CONFIG_SFI is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m

#
# CPUFreq processor drivers
#
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_POWERNOW_K8=m
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_INTEL_IDLE is not set

#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
# CONFIG_PCIEAER is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_HT_IRQ is not set
# CONFIG_PCI_IOV is not set
CONFIG_PCI_IOAPIC=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=m
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_SECMARK is not set
# CONFIG_NF_CONNTRACK_EVENTS is not set
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_SCTP=m
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
# CONFIG_NF_CONNTRACK_FTP is not set
# CONFIG_NF_CONNTRACK_H323 is not set
# CONFIG_NF_CONNTRACK_IRC is not set
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
# CONFIG_NF_CONNTRACK_SIP is not set
# CONFIG_NF_CONNTRACK_TFTP is not set
# CONFIG_NF_CT_NETLINK is not set
# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
# CONFIG_NETFILTER_XT_CONNMARK is not set

#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
# CONFIG_NETFILTER_XT_TARGET_CT is not set
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
# CONFIG_NETFILTER_XT_MATCH_STATE is not set
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_SCTP=m
# CONFIG_NF_NAT_FTP is not set
# CONFIG_NF_NAT_IRC is not set
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
# CONFIG_NF_NAT_SIP is not set
CONFIG_IP_NF_MANGLE=m
# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
# CONFIG_NET_SCH_MULTIQ is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
# CONFIG_NET_SCH_DRR is not set
CONFIG_NET_SCH_INGRESS=m

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
# CONFIG_NET_ACT_NAT is not set
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_ACT_CSUM is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
CONFIG_RPS=y
CONFIG_XPS=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y

#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y

#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
CONFIG_IDE_GD_ATAPI=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=y
CONFIG_BLK_DEV_IDEACPI=y
CONFIG_IDE_TASK_IOCTL=y
# CONFIG_IDE_PROC_FS is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y

#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=m
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_ATIIXP=y
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_ATA_SFF is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_MII=y
CONFIG_PHYLIB=m

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM63XX_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_KSZ884X_PCI is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
# CONFIG_WLAN is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_IPHETH is not set
# CONFIG_WAN is not set

#
# CAIF transport drivers
#
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_SLIP=m
# CONFIG_SLIP_COMPRESSED is not set
CONFIG_SLHC=m
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not set
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=m
CONFIG_SERIAL_8250_PNP=m
CONFIG_SERIAL_8250_NR_UARTS=16
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_RAMOOPS is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_MUX is not set
# CONFIG_I2C_HELPER_AUTO is not set
# CONFIG_I2C_SMBUS is not set

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
# CONFIG_I2C_AMD756_S4882 is not set
CONFIG_I2C_AMD8111=m
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_INTEL_MID is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
# CONFIG_I2C_EG20T is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set

#
# PPS support
#
# CONFIG_PPS is not set

#
# PPS generators support
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ20Z75 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_PKGTEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_SENSORS_APPLESMC is not set

#
# ACPI drivers
#
# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
# CONFIG_MFD_SUPPORT is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_TTM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_RADEON_KMS is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_STUB_POULSBO is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_WMT_GE_ROPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
# CONFIG_SND_DRIVERS is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
# CONFIG_SND_HDA_HWDEP is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_INPUT_JACK is not set
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_HDMI=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_USB is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HIDRAW is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set

#
# Special HID drivers
#
# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
# CONFIG_HID_CANDO is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_PRODIKEYS is not set
CONFIG_HID_CYPRESS=y
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_EGALAX is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWII_FF is not set
CONFIG_HID_MICROSOFT=y
# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_QUANTA is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_ROCCAT_KONE is not set
# CONFIG_HID_ROCCAT_KONEPLUS is not set
# CONFIG_HID_ROCCAT_PYRA is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_STANTUM is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_UAS is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_GADGET is not set

#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_NFC_DEVICES is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=y
CONFIG_EDAC_MCE_INJ=m
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_AMD64=m
CONFIG_EDAC_AMD64_ERROR_INJECTION=y
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82975X is not set
# CONFIG_EDAC_I3000 is not set
# CONFIG_EDAC_I3200 is not set
# CONFIG_EDAC_X38 is not set
# CONFIG_EDAC_I5400 is not set
# CONFIG_EDAC_I7CORE is not set
# CONFIG_EDAC_I5000 is not set
# CONFIG_EDAC_I5100 is not set
# CONFIG_EDAC_I7300 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_X86_PLATFORM_DEVICES is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_DMIID is not set
# CONFIG_ISCSI_IBFT_FIND is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
# CONFIG_CUSE is not set

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
# CONFIG_NFS_USE_NEW_IDMAPPER is not set
# CONFIG_NFSD is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_UPCALL is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DFS_UPCALL is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SOLARIS_X86_PARTITION=y
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-15"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_SLUB_DEBUG_ON=y
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_BKL=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_PROVE_RCU=y
# CONFIG_PROVE_RCU_REPEATEDLY is not set
# CONFIG_SPARSE_RCU_POINTER is not set
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_DETECTOR=y
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_RCU_CPU_STALL_DETECTOR_RUNNABLE=y
CONFIG_RCU_CPU_STALL_VERBOSE=y
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_LKDTM is not set
# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE_NMI_ENTER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_FTRACE_NMI_ENTER=y
CONFIG_EVENT_TRACING=y
# CONFIG_EVENT_POWER_TRACING_DEPRECATED is not set
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_IRQSOFF_TRACER=y
CONFIG_PREEMPT_TRACER=y
CONFIG_SCHED_TRACER=y
# CONFIG_FTRACE_SYSCALLS is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_DYNAMIC_FTRACE=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_DEBUG_SET_MODULE_RONX is not set
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
CONFIG_CRYPTO_FPU=m

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_GHASH is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_AES_NI_INTEL=m
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
# CONFIG_CRYPTO_LZO is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
# CONFIG_KVM_INTEL is not set
CONFIG_KVM_AMD=m
# CONFIG_KVM_MMU_AUDIT is not set
# CONFIG_VHOST_NET is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=m
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: lockdep: possible reason: unannotated irqs-off. (was: Re: Linux 2.6.38-rc4)
  2011-02-08 10:17 ` lockdep: possible reason: unannotated irqs-off. (was: Re: Linux 2.6.38-rc4) Borislav Petkov
@ 2011-02-08 10:41   ` Peter Zijlstra
  2011-02-08 12:11     ` Yong Zhang
  0 siblings, 1 reply; 62+ messages in thread
From: Peter Zijlstra @ 2011-02-08 10:41 UTC (permalink / raw)
  To: Borislav Petkov
  Cc: Linus Torvalds, Linux Kernel Mailing List, x86, tglx, Yong Zhang

On Tue, 2011-02-08 at 11:17 +0100, Borislav Petkov wrote:
> 
> So, I'm getting the warning below early in the boot process. And yes, I
> didn't have it on -rc3. 2.6.38-rc4-00001-g1e554e3-dirty means a debug
> diff ontop of -rc4 which shouldn't have anything to do with this splat
> since all it does is a couple of printk's due to -rc3 not suspending to
> disk properly in some cases.
> 
> Now, I'm not going to even pretend to understand the code but here's
> what I can read out, you tell me whether it makes sense.
> 
> spawn_ksoftirqd() is one of the early initcalls that gets called and
> it's notifier callback does kthread_bind() and you can follow in the
> backtrace below that this thing comes down to del_timer_sync() which
> does the lockdep annotation. Now, problem as I see it, is that hardirqs
> were disabled when we were called although it doesn't say so in the
> irqtrace events dump after the calltrace: "hardirqs last enabled at
> (999)" and our irq event stamp is 1000.
> 
> There are actually at least three del_timer_sync()'s inflight so the
> problem could be there somewhere, I dunno.
> 
> So, is it a wrong lockdep annotation or is it a real problem? I've
> attached dmesg and config.

Argh! Its an annotation nightmare that.. it didn't trigger for me when
running that because I didn't have DEBUG_LOCKDEP=y.

OK, let me try and come up with another way to annotate this
del_timer_sync() muck, the trouble is we want that lock to be called
with BH disabled, but simply doing local_bh_disable()/local_bh_enable()
has the nasty side effect of calling __do_softirq(). Faking IRQ state
will trip this check_flags() debug muck..

We used to have local_irq_disable()/local_irq_enable() around it, but
then people wanted to use del_timer_sync() from softirq context..




^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: lockdep: possible reason: unannotated irqs-off. (was: Re: Linux 2.6.38-rc4)
  2011-02-08 10:41   ` Peter Zijlstra
@ 2011-02-08 12:11     ` Yong Zhang
  2011-02-08 12:14       ` [PATCH 2/2] timer: use local_bh_enable_force_wake() in del_timer_sync() Yong Zhang
  2011-02-08 13:34       ` lockdep: possible reason: unannotated irqs-off. (was: Re: Linux 2.6.38-rc4) Yong Zhang
  0 siblings, 2 replies; 62+ messages in thread
From: Yong Zhang @ 2011-02-08 12:11 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Borislav Petkov, Linus Torvalds, Linux Kernel Mailing List, x86,
	tglx, Ingo Molnar, Andrew Morton

On Tue, Feb 08, 2011 at 11:41:52AM +0100, Peter Zijlstra wrote:
> Argh! Its an annotation nightmare that.. it didn't trigger for me when
> running that because I didn't have DEBUG_LOCKDEP=y.

Me too...

> 
> OK, let me try and come up with another way to annotate this
> del_timer_sync() muck,

Is my previous patch acceptable?

I inlined it as below(and updated based on linux-2.6.38-rc4)

---
From: Yong Zhang <yong.zhang0@gmail.com>
Subject: [PATCH 1/2] softirq: introduce loacal_bh_enable_force_wake()

If there is pending softirq, don't handle it in the caller's
context, invoke ksoftirqd directly instead.

del_timer_sync() will be the first caller.

Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
---
 include/linux/bottom_half.h |    1 +
 kernel/softirq.c            |   21 +++++++++++++++------
 2 files changed, 16 insertions(+), 6 deletions(-)

diff --git a/include/linux/bottom_half.h b/include/linux/bottom_half.h
index 27b1bcf..665d697 100644
--- a/include/linux/bottom_half.h
+++ b/include/linux/bottom_half.h
@@ -5,5 +5,6 @@ extern void local_bh_disable(void);
 extern void _local_bh_enable(void);
 extern void local_bh_enable(void);
 extern void local_bh_enable_ip(unsigned long ip);
+extern void local_bh_enable_force_wake(void);
 
 #endif /* _LINUX_BH_H */
diff --git a/kernel/softirq.c b/kernel/softirq.c
index 68eb5ef..3c05dfa 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -154,9 +154,9 @@ void _local_bh_enable(void)
 
 EXPORT_SYMBOL(_local_bh_enable);
 
-static inline void _local_bh_enable_ip(unsigned long ip)
+static inline void _local_bh_enable_ip(unsigned long ip, bool force_wake)
 {
-	WARN_ON_ONCE(in_irq() || irqs_disabled());
+	WARN_ON_ONCE(in_irq() || (!force_wake && irqs_disabled()));
 #ifdef CONFIG_TRACE_IRQFLAGS
 	local_irq_disable();
 #endif
@@ -171,8 +171,12 @@ static inline void _local_bh_enable_ip(unsigned long ip)
  	 */
 	sub_preempt_count(SOFTIRQ_DISABLE_OFFSET - 1);
 
-	if (unlikely(!in_interrupt() && local_softirq_pending()))
-		do_softirq();
+	if (unlikely(!in_interrupt() && local_softirq_pending())) {
+		if (!force_wake)
+			do_softirq();
+		else
+			wakeup_softirqd();
+	}
 
 	dec_preempt_count();
 #ifdef CONFIG_TRACE_IRQFLAGS
@@ -183,16 +187,21 @@ static inline void _local_bh_enable_ip(unsigned long ip)
 
 void local_bh_enable(void)
 {
-	_local_bh_enable_ip((unsigned long)__builtin_return_address(0));
+	_local_bh_enable_ip((unsigned long)__builtin_return_address(0), false);
 }
 EXPORT_SYMBOL(local_bh_enable);
 
 void local_bh_enable_ip(unsigned long ip)
 {
-	_local_bh_enable_ip(ip);
+	_local_bh_enable_ip(ip, false);
 }
 EXPORT_SYMBOL(local_bh_enable_ip);
 
+void local_bh_enable_force_wake(void)
+{
+	_local_bh_enable_ip((unsigned long)__builtin_return_address(0), true);
+}
+EXPORT_SYMBOL(local_bh_enable_force_wake);
 /*
  * We restart softirq processing MAX_SOFTIRQ_RESTART times,
  * and we fall back to softirqd after that.
-- 
1.7.1

^ permalink raw reply	[flat|nested] 62+ messages in thread

* [PATCH 2/2] timer: use local_bh_enable_force_wake() in del_timer_sync()
  2011-02-08 12:11     ` Yong Zhang
@ 2011-02-08 12:14       ` Yong Zhang
  2011-02-08 13:34       ` lockdep: possible reason: unannotated irqs-off. (was: Re: Linux 2.6.38-rc4) Yong Zhang
  1 sibling, 0 replies; 62+ messages in thread
From: Yong Zhang @ 2011-02-08 12:14 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Borislav Petkov, Linus Torvalds, Linux Kernel Mailing List, x86,
	tglx, Ingo Molnar, Andrew Morton, Peter Zijlstra

From: Yong Zhang <yong.zhang0@gmail.com>
Subject: [PATCH 2/2] timer: use local_bh_enable_force_wake() in del_timer_sync()

raw_local_irq_save()/raw_local_irq_restore() is also not suitable
here because lockdep will report "possible reason: unannotated irqs-off"

To cure this issue, use local_bh_enable_force_wake() here in case of
we have pending softirq left during this time.

Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
---
 kernel/timer.c |    6 +-----
 1 files changed, 1 insertions(+), 5 deletions(-)

diff --git a/kernel/timer.c b/kernel/timer.c
index d53ce66..1654dc1 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -969,14 +969,10 @@ EXPORT_SYMBOL(try_to_del_timer_sync);
 int del_timer_sync(struct timer_list *timer)
 {
 #ifdef CONFIG_LOCKDEP
-	unsigned long flags;
-
-	raw_local_irq_save(flags);
 	local_bh_disable();
 	lock_map_acquire(&timer->lockdep_map);
 	lock_map_release(&timer->lockdep_map);
-	_local_bh_enable();
-	raw_local_irq_restore(flags);
+	local_bh_enable_force_wake();
 #endif
 	/*
 	 * don't use it in hardirq context, because it
-- 
1.7.1

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: lockdep: possible reason: unannotated irqs-off. (was: Re: Linux 2.6.38-rc4)
  2011-02-08 12:11     ` Yong Zhang
  2011-02-08 12:14       ` [PATCH 2/2] timer: use local_bh_enable_force_wake() in del_timer_sync() Yong Zhang
@ 2011-02-08 13:34       ` Yong Zhang
  2011-02-08 13:48         ` Peter Zijlstra
  1 sibling, 1 reply; 62+ messages in thread
From: Yong Zhang @ 2011-02-08 13:34 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Borislav Petkov, Linus Torvalds, Linux Kernel Mailing List, x86,
	tglx, Ingo Molnar, Andrew Morton

On Tue, Feb 08, 2011 at 08:11:08PM +0800, Yong Zhang wrote:
> From: Yong Zhang <yong.zhang0@gmail.com>
> Subject: [PATCH 1/2] softirq: introduce loacal_bh_enable_force_wake()
> 
> If there is pending softirq, don't handle it in the caller's
> context, invoke ksoftirqd directly instead.
> 
> del_timer_sync() will be the first caller.
> 
> Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
> Cc: Ingo Molnar <mingo@elte.hu>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
> Cc: Andrew Morton <akpm@linux-foundation.org>
> ---
>  include/linux/bottom_half.h |    1 +
>  kernel/softirq.c            |   21 +++++++++++++++------
>  2 files changed, 16 insertions(+), 6 deletions(-)
> 
> diff --git a/include/linux/bottom_half.h b/include/linux/bottom_half.h
> index 27b1bcf..665d697 100644
> --- a/include/linux/bottom_half.h
> +++ b/include/linux/bottom_half.h
> @@ -5,5 +5,6 @@ extern void local_bh_disable(void);
>  extern void _local_bh_enable(void);
>  extern void local_bh_enable(void);
>  extern void local_bh_enable_ip(unsigned long ip);
> +extern void local_bh_enable_force_wake(void);
>  
>  #endif /* _LINUX_BH_H */
> diff --git a/kernel/softirq.c b/kernel/softirq.c
> index 68eb5ef..3c05dfa 100644
> --- a/kernel/softirq.c
> +++ b/kernel/softirq.c
> @@ -154,9 +154,9 @@ void _local_bh_enable(void)
>  
>  EXPORT_SYMBOL(_local_bh_enable);
>  
> -static inline void _local_bh_enable_ip(unsigned long ip)
> +static inline void _local_bh_enable_ip(unsigned long ip, bool force_wake)
>  {
> -	WARN_ON_ONCE(in_irq() || irqs_disabled());
> +	WARN_ON_ONCE(in_irq() || (!force_wake && irqs_disabled()));

Only suppressing the warning is not enough here :(

>  #ifdef CONFIG_TRACE_IRQFLAGS
>  	local_irq_disable();


The semantic "called with irqs_disabled" is showed on several place
of _local_bh_enable_ip().

Need more thinking about it...

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: lockdep: possible reason: unannotated irqs-off. (was: Re: Linux 2.6.38-rc4)
  2011-02-08 13:34       ` lockdep: possible reason: unannotated irqs-off. (was: Re: Linux 2.6.38-rc4) Yong Zhang
@ 2011-02-08 13:48         ` Peter Zijlstra
  2011-02-08 14:18           ` Peter Zijlstra
  0 siblings, 1 reply; 62+ messages in thread
From: Peter Zijlstra @ 2011-02-08 13:48 UTC (permalink / raw)
  To: Yong Zhang
  Cc: Borislav Petkov, Linus Torvalds, Linux Kernel Mailing List, x86,
	tglx, Ingo Molnar, Andrew Morton

On Tue, 2011-02-08 at 21:34 +0800, Yong Zhang wrote:
> On Tue, Feb 08, 2011 at 08:11:08PM +0800, Yong Zhang wrote:
> > From: Yong Zhang <yong.zhang0@gmail.com>
> > Subject: [PATCH 1/2] softirq: introduce loacal_bh_enable_force_wake()
> > 
> > If there is pending softirq, don't handle it in the caller's
> > context, invoke ksoftirqd directly instead.
> > 
> > del_timer_sync() will be the first caller.
> > 
> > Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
> > Cc: Ingo Molnar <mingo@elte.hu>
> > Cc: Thomas Gleixner <tglx@linutronix.de>
> > Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
> > Cc: Andrew Morton <akpm@linux-foundation.org>
> > ---
> >  include/linux/bottom_half.h |    1 +
> >  kernel/softirq.c            |   21 +++++++++++++++------
> >  2 files changed, 16 insertions(+), 6 deletions(-)
> > 
> > diff --git a/include/linux/bottom_half.h b/include/linux/bottom_half.h
> > index 27b1bcf..665d697 100644
> > --- a/include/linux/bottom_half.h
> > +++ b/include/linux/bottom_half.h
> > @@ -5,5 +5,6 @@ extern void local_bh_disable(void);
> >  extern void _local_bh_enable(void);
> >  extern void local_bh_enable(void);
> >  extern void local_bh_enable_ip(unsigned long ip);
> > +extern void local_bh_enable_force_wake(void);
> >  
> >  #endif /* _LINUX_BH_H */
> > diff --git a/kernel/softirq.c b/kernel/softirq.c
> > index 68eb5ef..3c05dfa 100644
> > --- a/kernel/softirq.c
> > +++ b/kernel/softirq.c
> > @@ -154,9 +154,9 @@ void _local_bh_enable(void)
> >  
> >  EXPORT_SYMBOL(_local_bh_enable);
> >  
> > -static inline void _local_bh_enable_ip(unsigned long ip)
> > +static inline void _local_bh_enable_ip(unsigned long ip, bool force_wake)
> >  {
> > -	WARN_ON_ONCE(in_irq() || irqs_disabled());
> > +	WARN_ON_ONCE(in_irq() || (!force_wake && irqs_disabled()));
> 
> Only suppressing the warning is not enough here :(
> 
> >  #ifdef CONFIG_TRACE_IRQFLAGS
> >  	local_irq_disable();
> 
> 
> The semantic "called with irqs_disabled" is showed on several place
> of _local_bh_enable_ip().
> 
> Need more thinking about it...

Well that and modifying softirq bits for a lockdep annotation really
feels wrong.


^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: lockdep: possible reason: unannotated irqs-off. (was: Re: Linux 2.6.38-rc4)
  2011-02-08 13:48         ` Peter Zijlstra
@ 2011-02-08 14:18           ` Peter Zijlstra
  2011-02-08 15:15             ` Ingo Molnar
                               ` (3 more replies)
  0 siblings, 4 replies; 62+ messages in thread
From: Peter Zijlstra @ 2011-02-08 14:18 UTC (permalink / raw)
  To: Yong Zhang
  Cc: Borislav Petkov, Linus Torvalds, Linux Kernel Mailing List, x86,
	tglx, Ingo Molnar, Andrew Morton

On Tue, 2011-02-08 at 14:48 +0100, Peter Zijlstra wrote:
> 
> Well that and modifying softirq bits for a lockdep annotation really
> feels wrong. 

How about we revert it for this release and try again later?

---
Subject: lockdep, timer: Revert the del_timer_sync() annotation

Both attempts at trying to allow softirq usage failed, revert for this
release and try again later.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
---
 kernel/timer.c |    8 +++-----
 1 files changed, 3 insertions(+), 5 deletions(-)

diff --git a/kernel/timer.c b/kernel/timer.c
index 343ff27..c848cd8 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -959,7 +959,7 @@ EXPORT_SYMBOL(try_to_del_timer_sync);
  *
  * Synchronization rules: Callers must prevent restarting of the timer,
  * otherwise this function is meaningless. It must not be called from
- * hardirq contexts. The caller must not hold locks which would prevent
+ * interrupt contexts. The caller must not hold locks which would prevent
  * completion of the timer's handler. The timer's handler must not call
  * add_timer_on(). Upon exit the timer is not queued and the handler is
  * not running on any CPU.
@@ -971,12 +971,10 @@ int del_timer_sync(struct timer_list *timer)
 #ifdef CONFIG_LOCKDEP
 	unsigned long flags;
 
-	raw_local_irq_save(flags);
-	local_bh_disable();
+	local_irq_save(flags);
 	lock_map_acquire(&timer->lockdep_map);
 	lock_map_release(&timer->lockdep_map);
-	_local_bh_enable();
-	raw_local_irq_restore(flags);
+	local_irq_restore(flags);
 #endif
 	/*
 	 * don't use it in hardirq context, because it



^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: lockdep: possible reason: unannotated irqs-off. (was: Re: Linux 2.6.38-rc4)
  2011-02-08 14:18           ` Peter Zijlstra
@ 2011-02-08 15:15             ` Ingo Molnar
  2011-02-08 15:51             ` [tip:core/urgent] Revert "lockdep, timer: Fix del_timer_sync() annotation" tip-bot for Peter Zijlstra
                               ` (2 subsequent siblings)
  3 siblings, 0 replies; 62+ messages in thread
From: Ingo Molnar @ 2011-02-08 15:15 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Yong Zhang, Borislav Petkov, Linus Torvalds,
	Linux Kernel Mailing List, x86, tglx, Andrew Morton


* Peter Zijlstra <peterz@infradead.org> wrote:

> On Tue, 2011-02-08 at 14:48 +0100, Peter Zijlstra wrote:
> > 
> > Well that and modifying softirq bits for a lockdep annotation really
> > feels wrong. 
> 
> How about we revert it for this release and try again later?

That's the sanest way forward i think ...

I've queued up the revert.

Thanks,

	Ingo

^ permalink raw reply	[flat|nested] 62+ messages in thread

* [tip:core/urgent] Revert "lockdep, timer: Fix del_timer_sync() annotation"
  2011-02-08 14:18           ` Peter Zijlstra
  2011-02-08 15:15             ` Ingo Molnar
@ 2011-02-08 15:51             ` tip-bot for Peter Zijlstra
  2011-02-09  1:46             ` lockdep: possible reason: unannotated irqs-off. (was: Re: Linux 2.6.38-rc4) Yong Zhang
  2011-02-14 14:51             ` Yong Zhang
  3 siblings, 0 replies; 62+ messages in thread
From: tip-bot for Peter Zijlstra @ 2011-02-08 15:51 UTC (permalink / raw)
  To: linux-tip-commits
  Cc: linux-kernel, hpa, mingo, torvalds, a.p.zijlstra, peterz, bp,
	tglx, yong.zhang0, mingo

Commit-ID:  7ff207928eb0761fa6b6c39eda82ac07a5241acf
Gitweb:     http://git.kernel.org/tip/7ff207928eb0761fa6b6c39eda82ac07a5241acf
Author:     Peter Zijlstra <peterz@infradead.org>
AuthorDate: Tue, 8 Feb 2011 15:18:00 +0100
Committer:  Ingo Molnar <mingo@elte.hu>
CommitDate: Tue, 8 Feb 2011 16:18:39 +0100

Revert "lockdep, timer: Fix del_timer_sync() annotation"

Both attempts at trying to allow softirq usage for
del_timer_sync() failed (produced bogus warnings),
so revert the commit for this release:

  f266a5110d45: lockdep, timer: Fix del_timer_sync() annotation

and try again later.

Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Yong Zhang <yong.zhang0@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1297174680.13327.107.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/timer.c |    8 +++-----
 1 files changed, 3 insertions(+), 5 deletions(-)

diff --git a/kernel/timer.c b/kernel/timer.c
index d53ce66..d645992 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -959,7 +959,7 @@ EXPORT_SYMBOL(try_to_del_timer_sync);
  *
  * Synchronization rules: Callers must prevent restarting of the timer,
  * otherwise this function is meaningless. It must not be called from
- * hardirq contexts. The caller must not hold locks which would prevent
+ * interrupt contexts. The caller must not hold locks which would prevent
  * completion of the timer's handler. The timer's handler must not call
  * add_timer_on(). Upon exit the timer is not queued and the handler is
  * not running on any CPU.
@@ -971,12 +971,10 @@ int del_timer_sync(struct timer_list *timer)
 #ifdef CONFIG_LOCKDEP
 	unsigned long flags;
 
-	raw_local_irq_save(flags);
-	local_bh_disable();
+	local_irq_save(flags);
 	lock_map_acquire(&timer->lockdep_map);
 	lock_map_release(&timer->lockdep_map);
-	_local_bh_enable();
-	raw_local_irq_restore(flags);
+	local_irq_restore(flags);
 #endif
 	/*
 	 * don't use it in hardirq context, because it

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Heads up Linux 2.6.38-rc4 compile problems.
  2011-02-08  0:23 Linux 2.6.38-rc4 Linus Torvalds
  2011-02-08 10:17 ` lockdep: possible reason: unannotated irqs-off. (was: Re: Linux 2.6.38-rc4) Borislav Petkov
@ 2011-02-08 20:28 ` Eric W. Biederman
  2011-02-08 20:44   ` Linus Torvalds
  2011-02-09 17:08 ` Linux 2.6.38-rc4 (test_nx: BUG) Randy Dunlap
                   ` (4 subsequent siblings)
  6 siblings, 1 reply; 62+ messages in thread
From: Eric W. Biederman @ 2011-02-08 20:28 UTC (permalink / raw)
  To: Linus Torvalds; +Cc: Linux Kernel Mailing List


A quick heads up.  2.6.38-rc4 looks like the worst kernel I've ever tried to
test.  It boots up properly and looks ok, but I can't get it to even
compile the programs I usually test with. 2.6.38-rc3 at least managed
that yesterday.

>From 2.6.38-rc3 I managed to figure out that tftp transfers over ipv6
with curl are dying in with a getpeername problem.

Eric

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Heads up Linux 2.6.38-rc4 compile problems.
  2011-02-08 20:28 ` Heads up Linux 2.6.38-rc4 compile problems Eric W. Biederman
@ 2011-02-08 20:44   ` Linus Torvalds
  2011-02-09  9:01     ` Eric W. Biederman
  0 siblings, 1 reply; 62+ messages in thread
From: Linus Torvalds @ 2011-02-08 20:44 UTC (permalink / raw)
  To: Eric W. Biederman, David Miller; +Cc: Linux Kernel Mailing List

On Tue, Feb 8, 2011 at 12:28 PM, Eric W. Biederman
<ebiederm@xmission.com> wrote:
>
> A quick heads up.  2.6.38-rc4 looks like the worst kernel I've ever tried to
> test.  It boots up properly and looks ok, but I can't get it to even
> compile the programs I usually test with. 2.6.38-rc3 at least managed
> that yesterday.

gcc dying with ICE or SIGSEGV? Or what? Seriously lacking information here.

Are you using btrfs or cifs (the two filesystems that had
bigger-than-average changes)?

Any chance to bisect it (even if just partially - a couple of
bisection runs would already narrow it down quite a bit)?

> From 2.6.38-rc3 I managed to figure out that tftp transfers over ipv6
> with curl are dying in with a getpeername problem.

Hmm. Adding Davem for that one, although I'd expect you to be able to
figure out some networking problem on your own and perhaps give a
better report?

                             Linus

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: lockdep: possible reason: unannotated irqs-off. (was: Re: Linux 2.6.38-rc4)
  2011-02-08 14:18           ` Peter Zijlstra
  2011-02-08 15:15             ` Ingo Molnar
  2011-02-08 15:51             ` [tip:core/urgent] Revert "lockdep, timer: Fix del_timer_sync() annotation" tip-bot for Peter Zijlstra
@ 2011-02-09  1:46             ` Yong Zhang
  2011-02-14 14:51             ` Yong Zhang
  3 siblings, 0 replies; 62+ messages in thread
From: Yong Zhang @ 2011-02-09  1:46 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Borislav Petkov, Linus Torvalds, Linux Kernel Mailing List, x86,
	tglx, Ingo Molnar, Andrew Morton

On Tue, Feb 8, 2011 at 10:18 PM, Peter Zijlstra <peterz@infradead.org> wrote:
> On Tue, 2011-02-08 at 14:48 +0100, Peter Zijlstra wrote:
>>
>> Well that and modifying softirq bits for a lockdep annotation really
>> feels wrong.
>
> How about we revert it for this release and try again later?

No problem.

I'll take another look at this issue later.

Thanks,
Yong

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Heads up Linux 2.6.38-rc4 compile problems.
  2011-02-08 20:44   ` Linus Torvalds
@ 2011-02-09  9:01     ` Eric W. Biederman
  2011-02-09 14:59       ` Alex Riesen
  0 siblings, 1 reply; 62+ messages in thread
From: Eric W. Biederman @ 2011-02-09  9:01 UTC (permalink / raw)
  To: Linus Torvalds; +Cc: David Miller, Linux Kernel Mailing List

[-- Attachment #1: Type: text/plain, Size: 10199 bytes --]

Linus Torvalds <torvalds@linux-foundation.org> writes:

> On Tue, Feb 8, 2011 at 12:28 PM, Eric W. Biederman
> <ebiederm@xmission.com> wrote:
>>
>> A quick heads up.  2.6.38-rc4 looks like the worst kernel I've ever tried to
>> test.  It boots up properly and looks ok, but I can't get it to even
>> compile the programs I usually test with. 2.6.38-rc3 at least managed
>> that yesterday.
>
> gcc dying with ICE or SIGSEGV? Or what? Seriously lacking information
> here.
>
> Are you using btrfs or cifs (the two filesystems that had
> bigger-than-average changes)?
>
> Any chance to bisect it (even if just partially - a couple of
> bisection runs would already narrow it down quite a bit)?

What I have been able to do today on this one is, narrow it down a
little and provide a reasonable description of one of the problem.

In a fedora 12 world in a subdirectory on ext4 with the applications
pinned into a mount namespace.  I am seeing compiles of gcc-4.4.3 fail.  A
quick survey of the compile failures makes it look like these compiles
failures are deterministic, at least I see the same error messages in multiple
failed builds.

The machine is a dual socket quad core non hyperthread machine with 10G of RAM.
The cpus are: Intel(R) Xeon(R) CPU           E5420  @ 2.50GHz

In the case that fails I am simultaneously compiling a 32bit gcc cross
compiler for x86_64 and i386, for the same source but with different
object directories.  The compiles failures happen exactly as before if I
rerun the build commands.  I'm still trying to figure out why the
individual files are failing.  I expect if I do that will give me a much
bigger clue.

What is interesting is that this fails exactly the same way in at least three invocations
of the command and I expect all of them.  With failures taking about 30 minutes.
I might try a bisect tomorrow.

The unfortunate thing is that this weird compile failure during a
parallel build doesn't tell me much yet about what the root cause is.

I have attached my build scripts in case that helps.  To understand.
At the moment I am still trying to break this down into something smaller
so I can see just what the heck is going on.  And I will keep poking at
it until I get somewhere.

The annoying thing is that looking at the other failures I was seeing
before the compile fell apart.  I think I am might be on top of half a
dozen other regressions as well.  I don't have a clue how I am going to
get through all of those regressions before before 2.6.38 is out. 

Eric

The failures look like:

$ make -C gcc-stage1-x86_64 all-gcc all-target-libgcc install-gcc install-target-libgcc DESTDIR=/bld/Across/Across-2.0.0/sysroot-x86_64
gcc -qlanglvl=ansi -c -DHAVE_CONFIG_H -g -O2 -I. -I/bld/Across/Across-2.0.0/gcc-4.4.3/libiberty/../include  -W -Wall
-Wwrite-strings -Wc++-compat -Wstrict-prototypes /bld/Across/Across-2.0.0/gcc-4.4.3/libiberty/fibheap.c -o fibheap.o
gcc: unrecognized option '-qlanglvl=ansi'
/bld/Across/Across-2.0.0/gcc-4.4.3/libiberty/fibheap.c: In function ‘fibheap_union’:
/bld/Across/Across-2.0.0/gcc-4.4.3/libiberty/fibheap.c:151: warning: implicit declaration of function ‘free’
/bld/Across/Across-2.0.0/gcc-4.4.3/libiberty/fibheap.c:151: warning: incompatible implicit declaration of built-in function ‘free’
/bld/Across/Across-2.0.0/gcc-4.4.3/libiberty/fibheap.c:156: warning: incompatible implicit declaration of built-in function ‘free’
/bld/Across/Across-2.0.0/gcc-4.4.3/libiberty/fibheap.c:172: warning: incompatible implicit declaration of built-in function ‘free’
/bld/Across/Across-2.0.0/gcc-4.4.3/libiberty/fibheap.c: In function ‘fibheap_extract_min’:
/bld/Across/Across-2.0.0/gcc-4.4.3/libiberty/fibheap.c:190: warning: incompatible implicit declaration of built-in function ‘free’
/bld/Across/Across-2.0.0/gcc-4.4.3/libiberty/fibheap.c: In function ‘fibheap_delete_node’:
/bld/Across/Across-2.0.0/gcc-4.4.3/libiberty/fibheap.c:258: error: ‘LONG_MIN’ undeclared (first use in this function)
/bld/Across/Across-2.0.0/gcc-4.4.3/libiberty/fibheap.c:258: error: (Each undeclared identifier is reported only once
/bld/Across/Across-2.0.0/gcc-4.4.3/libiberty/fibheap.c:258: error: for each function it appears in.)
/bld/Across/Across-2.0.0/gcc-4.4.3/libiberty/fibheap.c: In function ‘fibheap_delete’:
/bld/Across/Across-2.0.0/gcc-4.4.3/libiberty/fibheap.c:269: warning: incompatible implicit declaration of built-in function ‘free’
/bld/Across/Across-2.0.0/gcc-4.4.3/libiberty/fibheap.c: In function ‘fibheap_consolidate’:
/bld/Across/Across-2.0.0/gcc-4.4.3/libiberty/fibheap.c:360: warning: implicit declaration of function ‘memset’
/bld/Across/Across-2.0.0/gcc-4.4.3/libiberty/fibheap.c:360: warning: incompatible implicit declaration of built-in function ‘memset’


$ make -C gcc-stage1-i386 all-gcc all-target-libgcc install-gcc install-target-libgcc DESTDIR=/bld/Across/Across-2.0.0/sysroot-i386
make: Entering directory `/bld/Across/Across-2.0.0/gcc-stage1-i386'
make[1]: Entering directory `/bld/Across/Across-2.0.0/gcc-stage1-i386/libiberty'
make[2]: Entering directory `/bld/Across/Across-2.0.0/gcc-stage1-i386/libiberty/testsuite'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/bld/Across/Across-2.0.0/gcc-stage1-i386/libiberty/testsuite'
make[1]: Leaving directory `/bld/Across/Across-2.0.0/gcc-stage1-i386/libiberty'
make[1]: Entering directory `/bld/Across/Across-2.0.0/gcc-stage1-i386/intl'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/bld/Across/Across-2.0.0/gcc-stage1-i386/intl'
make[1]: Entering directory `/bld/Across/Across-2.0.0/gcc-stage1-i386/build-i686-pc-linux-gnu/libiberty'
make[2]: Entering directory `/bld/Across/Across-2.0.0/gcc-stage1-i386/build-i686-pc-linux-gnu/libiberty/testsuite'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/bld/Across/Across-2.0.0/gcc-stage1-i386/build-i686-pc-linux-gnu/libiberty/testsuite'
make[1]: Leaving directory `/bld/Across/Across-2.0.0/gcc-stage1-i386/build-i686-pc-linux-gnu/libiberty'
make[1]: Entering directory `/bld/Across/Across-2.0.0/gcc-stage1-i386/build-i686-pc-linux-gnu/fixincludes'
gcc -g -O2  -o fixincl fixincl.o fixtests.o fixfixes.o server.o procopen.o fixlib.o fixopts.o ../libiberty/libiberty.a
fixincl.o: In function `quoted_file_exists':
/bld/Across/Across-2.0.0/gcc-4.4.3/fixincludes/fixincl.c:624: undefined reference to `_sch_istable'
/bld/Across/Across-2.0.0/gcc-4.4.3/fixincludes/fixincl.c:624: undefined reference to `_sch_istable'
fixincl.o: In function `egrep_test':
/bld/Across/Across-2.0.0/gcc-4.4.3/fixincludes/fixincl.c:600: undefined reference to `xregexec'
/bld/Across/Across-2.0.0/gcc-4.4.3/fixincludes/fixincl.c:600: undefined reference to `xregexec'
fixincl.o: In function `test_for_changes':
/bld/Across/Across-2.0.0/gcc-4.4.3/fixincludes/fixincl.c:1211: undefined reference to `xregexec'
fixincl.o: In function `extract_quoted_files':
/bld/Across/Across-2.0.0/gcc-4.4.3/fixincludes/fixincl.c:711: undefined reference to `xregexec'
fixincl.o: In function `initialize':
/bld/Across/Across-2.0.0/gcc-4.4.3/fixincludes/fixincl.c:245: undefined reference to `_sch_istable'
fixincl.o: In function `main':
/bld/Across/Across-2.0.0/gcc-4.4.3/fixincludes/fixincl.c:139: undefined reference to `_sch_istable'
/bld/Across/Across-2.0.0/gcc-4.4.3/fixincludes/fixincl.c:157: undefined reference to `_sch_istable'
fixtests.o: In function `machine_name_test':
/bld/Across/Across-2.0.0/gcc-4.4.3/fixincludes/fixtests.c:79: undefined reference to `xregexec'
/bld/Across/Across-2.0.0/gcc-4.4.3/fixincludes/fixtests.c:104: undefined reference to `xregexec'
fixfixes.o: In function `gnu_type_fix':
/bld/Across/Across-2.0.0/gcc-4.4.3/fixincludes/fixfixes.c:681: undefined reference to `xregexec'
fixfixes.o: In function `emit_gnu_type':
/bld/Across/Across-2.0.0/gcc-4.4.3/fixincludes/fixfixes.c:144: undefined reference to `_sch_toupper'
fixfixes.o: In function `wrap_fix':
/bld/Across/Across-2.0.0/gcc-4.4.3/fixincludes/fixfixes.c:599: undefined reference to `xregexec'
/bld/Across/Across-2.0.0/gcc-4.4.3/fixincludes/fixfixes.c:617: undefined reference to `_sch_istable'
/bld/Across/Across-2.0.0/gcc-4.4.3/fixincludes/fixfixes.c:621: undefined reference to `_sch_toupper'
fixfixes.o: In function `machine_name_fix':
/bld/Across/Across-2.0.0/gcc-4.4.3/fixincludes/fixfixes.c:508: undefined reference to `xregexec'
/bld/Across/Across-2.0.0/gcc-4.4.3/fixincludes/fixfixes.c:539: undefined reference to `xregexec'
fixfixes.o: In function `format_fix':
/bld/Across/Across-2.0.0/gcc-4.4.3/fixincludes/fixfixes.c:282: undefined reference to `xregexec'
fixfixes.o: In function `format_write':
/bld/Across/Across-2.0.0/gcc-4.4.3/fixincludes/fixfixes.c:198: undefined reference to `_sch_istable'
fixfixes.o: In function `char_macro_use_fix':
/bld/Across/Across-2.0.0/gcc-4.4.3/fixincludes/fixfixes.c:332: undefined reference to `xregexec'
/bld/Across/Across-2.0.0/gcc-4.4.3/fixincludes/fixfixes.c:439: undefined reference to `_sch_istable'
/bld/Across/Across-2.0.0/gcc-4.4.3/fixincludes/fixfixes.c:448: undefined reference to `_sch_istable'
/bld/Across/Across-2.0.0/gcc-4.4.3/fixincludes/fixfixes.c:451: undefined reference to `_sch_istable'
/bld/Across/Across-2.0.0/gcc-4.4.3/fixincludes/fixfixes.c:453: undefined reference to `_sch_istable'
/bld/Across/Across-2.0.0/gcc-4.4.3/fixincludes/fixfixes.c:448: undefined reference to `_sch_istable'
server.o:/bld/Across/Across-2.0.0/gcc-4.4.3/fixincludes/server.c:124: more undefined references to `_sch_istable' follow
fixlib.o: In function `compile_re':
/bld/Across/Across-2.0.0/gcc-4.4.3/fixincludes/fixlib.c:193: undefined reference to `xregcomp'
/bld/Across/Across-2.0.0/gcc-4.4.3/fixincludes/fixlib.c:198: undefined reference to `xregerror'
collect2: ld returned 1 exit status
make[1]: *** [full-stamp] Error 1
make[1]: Leaving directory `/bld/Across/Across-2.0.0/gcc-stage1-i386/build-i686-pc-linux-gnu/fixincludes'
make: *** [all-build-fixincludes] Error 2
make: Leaving directory `/bld/Across/Across-2.0.0/gcc-stage1-i386'




[-- Attachment #2: Across.spec --]
[-- Type: text/plain, Size: 2117 bytes --]

Name:           Across
Version:        2.0.0
Release:        %{?release:%{release}}%{!?release:eng}
Summary:        uClibc-based development toolchain

Group:          Development/Tools
License:        GPL
Source0:        uClibc-0.9.30.2.tar.bz2
Source1:        binutils-2.20.tar.bz2
Source2:        gcc-core-4.4.3.tar.bz2
Source3:        gmp-4.3.2.tar.bz2
Source4:        mpfr-2.4.2.tar.bz2
Source5:        kernel-headers-2.6.29.6.tar.bz2
Source10:       build.sh
Source11:       uclibc-i386.config
Source12:       uclibc-x86_64.config
BuildRoot:      %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)

BuildRequires:  quilt

# Disable automatic dependency processing: we don't want to override
# standard system libraries like libresolv.so.0
AutoReqProv:    no

# Disable automatic debuginfo package generation and other post-build
# processing, because it does not handle uClibc binaries
%define __spec_install_post %{nil}
%define debug_package %{nil}

%description
This package provides development tools based on the uClibc library, a
space-efficient replacement for glibc.

%prep
%setup -q -c -T -a 0 -a 1 -a 2 -a 3 -a 4 -a 5
ln -s %{_sourcedir} patches
#echo %{PATCHURL1} | tr ' ' '\n' >series
#quilt push -a
cp %{SOURCE10} %{SOURCE11} %{SOURCE12} .
chmod +x build.sh

%build
%{?a4_configure:exit 0}
( cd gmp-4.3.2; ./configure )
make -C gmp-4.3.2 all
( cd mpfr-2.4.2; ./configure --with-gmp-build=../gmp-4.3.2 )
make -C mpfr-2.4.2 all
./build.sh i386 $(pwd)/sysroot-i386 $(pwd)/uClibc-0.9.30.2 $(pwd)/binutils-2.20 $(pwd)/gcc-4.4.3 $(pwd)/gmp-4.3.2 $(pwd)/mpfr-2.4.2 $(pwd)/kernel-headers-2.6.29.6/include &
./build.sh x86_64 $(pwd)/sysroot-x86_64 $(pwd)/uClibc-0.9.30.2 $(pwd)/binutils-2.20 $(pwd)/gcc-4.4.3 $(pwd)/gmp-4.3.2 $(pwd)/mpfr-2.4.2 $(pwd)/kernel-headers-2.6.29.6/include &
wait

%install
rm -rf $RPM_BUILD_ROOT
mkdir -p $RPM_BUILD_ROOT/usr/share/Across
cp -alv sysroot-i386 $RPM_BUILD_ROOT/usr/share/Across/i386-linux-uclibc
cp -alv sysroot-x86_64 $RPM_BUILD_ROOT/usr/share/Across/x86_64-linux-uclibc

%clean
rm -rf $RPM_BUILD_ROOT

%files
%defattr(-,root,root,-)
/usr/share/Across/*

[-- Attachment #3: build.sh --]
[-- Type: text/plain, Size: 2854 bytes --]

#!/bin/bash
#
# Build a gcc + uClibc toolchain
#
# References:
# http://gcc.gnu.org/ml/gcc/2007-08/msg00327.html
# http://busybox.net/~vda/HOWTO/i486-linux-uclibc/HOWTO.txt
# http://wiki.osdev.org/GCC_Cross-Compiler

set -ex

arch=$1
sysroot=$2
uclibc=$3
binutils=$4
gcc=$5
gmp=$6
mpfr=$7
kernel_headers=$8

unset CPATH LIBRARY_PATH INSTALL
PATH=/usr/lib/ccache:/bin:/usr/bin
rm -rf ${sysroot}
mkdir ${sysroot}
ln -s . ${sysroot}/usr

# Link target-specific usr directory to usr, otherwise gcc has trouble finding ld
ln -s . ${sysroot}/usr/${arch}-linux-uclibc

# Install kernel headers
mkdir ${sysroot}/usr/include
cp -pLR ${kernel_headers}/{asm,linux,asm-generic} ${sysroot}/usr/include/

# Build binutils
mkdir binutils-${arch}
( cd binutils-${arch}; ${binutils}/configure --prefix=/usr --target=${arch}-linux-uclibc --with-gmp-include=${gmp} --with-gmp-lib=${gmp}/.libs --with-mpfr-include=${mpfr} --with-mpfr-lib=${mpfr}/.libs --with-sysroot=${sysroot} --program-prefix=${arch}-linux-uclibc- )
make -C binutils-${arch} all install DESTDIR=${sysroot}

# Build stage 1 gcc (required to build uClibc)
mkdir gcc-stage1-${arch}
( cd gcc-stage1-${arch}; ${gcc}/configure --prefix=/usr --target=${arch}-linux-uclibc --enable-languages=c --with-gmp-include=${gmp} --with-gmp-lib=${gmp}/.libs --with-mpfr-include=${mpfr} --with-mpfr-lib=${mpfr}/.libs --disable-shared --disable-nls --disable-multilib --disable-threads --disable-libmudflap --disable-libssp --disable-libgomp --disable-decimal-float --disable-tls --without-headers --with-build-time-tools=${sysroot}/usr/bin --with-gnu-ld )
make -C gcc-stage1-${arch} all-gcc all-target-libgcc install-gcc install-target-libgcc DESTDIR=${sysroot}

# Build uClibc
cp -a ${uclibc} uclibc-${arch}
cp uclibc-${arch}.config uclibc-${arch}/.config
make -C uclibc-${arch} oldconfig
make -C uclibc-${arch} extra/scripts/unifdef
PATH=${sysroot}/usr/bin:${PATH} make -C uclibc-${arch} CROSS=${arch}-linux-uclibc- KERNEL_HEADERS=${sysroot}/usr/include PREFIX=${sysroot} RUNTIME_PREFIX=/ DEVEL_PREFIX=/ RUNTIME_PREFIX_LIB_FROM_DEVEL_PREFIX_LIB= V=1 all install
PATH=${sysroot}/usr/bin:${PATH} make -C uclibc-${arch}/utils CROSS=${arch}-linux-uclibc- KERNEL_HEADERS=${sysroot}/usr/include PREFIX=${sysroot} RUNTIME_PREFIX=/ DEVEL_PREFIX=/ RUNTIME_PREFIX_LIB_FROM_DEVEL_PREFIX_LIB= V=1 hostutils utils_install

# Build final gcc targeting uClibc
mkdir gcc-final-${arch}
( cd gcc-final-${arch}; ${gcc}/configure --prefix=/usr --target=${arch}-linux-uclibc --enable-languages=c --with-sysroot=${sysroot} --with-gmp-include=${gmp} --with-gmp-lib=${gmp}/.libs --with-mpfr-include=${mpfr} --with-mpfr-lib=${mpfr}/.libs --disable-nls --disable-multilib --disable-threads --disable-libgomp --disable-decimal-float --with-build-time-tools=${sysroot}/usr/bin --with-gnu-ld )
make -C gcc-final-${arch} all install DESTDIR=${sysroot}

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Heads up Linux 2.6.38-rc4 compile problems.
  2011-02-09  9:01     ` Eric W. Biederman
@ 2011-02-09 14:59       ` Alex Riesen
  2011-02-09 16:02         ` Linus Torvalds
  0 siblings, 1 reply; 62+ messages in thread
From: Alex Riesen @ 2011-02-09 14:59 UTC (permalink / raw)
  To: Eric W. Biederman; +Cc: Linus Torvalds, David Miller, Linux Kernel Mailing List

On Wed, Feb 9, 2011 at 10:01, Eric W. Biederman <ebiederm@xmission.com> wrote:
> The failures look like:
>
> $ make -C gcc-stage1-x86_64 all-gcc all-target-libgcc install-gcc install-target-libgcc DESTDIR=/bld/Across/Across-2.0.0/sysroot-x86_64
> gcc -qlanglvl=ansi -c -DHAVE_CONFIG_H -g -O2 -I. -I/bld/Across/Across-2.0.0/gcc-4.4.3/libiberty/../include  -W -Wall
> -Wwrite-strings -Wc++-compat -Wstrict-prototypes /bld/Across/Across-2.0.0/gcc-4.4.3/libiberty/fibheap.c -o fibheap.o
> gcc: unrecognized option '-qlanglvl=ansi'
> /bld/Across/Across-2.0.0/gcc-4.4.3/libiberty/fibheap.c: In function ‘fibheap_union’:
> /bld/Across/Across-2.0.0/gcc-4.4.3/libiberty/fibheap.c:151: warning: implicit declaration of function ‘free’

Maybe some files (stdlib.h or malloc.h) return no data when read?
Then, gcc still
"compiles" them, but all the declarations are missing. And I would expect gcc
to complain if zero blocks returned, and truncated files are very likely to
abort compilation.

Can the command be strace'd immediately after the failure?

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Heads up Linux 2.6.38-rc4 compile problems.
  2011-02-09 14:59       ` Alex Riesen
@ 2011-02-09 16:02         ` Linus Torvalds
  2011-02-13 17:39           ` Linus Torvalds
  0 siblings, 1 reply; 62+ messages in thread
From: Linus Torvalds @ 2011-02-09 16:02 UTC (permalink / raw)
  To: Alex Riesen; +Cc: Eric W. Biederman, David Miller, Linux Kernel Mailing List

On Wed, Feb 9, 2011 at 6:59 AM, Alex Riesen <raa.lkml@gmail.com> wrote:
>
> Maybe some files (stdlib.h or malloc.h) return no data when read?
> Then, gcc still
> "compiles" them, but all the declarations are missing. And I would expect gcc
> to complain if zero blocks returned, and truncated files are very likely to
> abort compilation.

Well, the thing is, Eric said he was using ext4.

And there are absolutely no changes I can see after -rc3 that would
affect anything like this. No VFS layer changes that look at all
likely, there are no ext4 changes at all, and the VM changes there are
look rather unlikely too (ie they are about corner cases in page
migration and transparent hugepage support - not to mention that it's
almost certainly not some VM race or whatever if they are
deterministic).

The only unusual thing in Eric's setup is the mount namespace usage,
but nothing has changed wrt that, at least since -rc3.

                         Linus

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Linux 2.6.38-rc4 (test_nx: BUG)
  2011-02-08  0:23 Linux 2.6.38-rc4 Linus Torvalds
  2011-02-08 10:17 ` lockdep: possible reason: unannotated irqs-off. (was: Re: Linux 2.6.38-rc4) Borislav Petkov
  2011-02-08 20:28 ` Heads up Linux 2.6.38-rc4 compile problems Eric W. Biederman
@ 2011-02-09 17:08 ` Randy Dunlap
  2011-02-09 17:10   ` Arjan van de Ven
  2011-02-09 17:24 ` Linux 2.6.38-rc4 (hysdn: BUG) Randy Dunlap
                   ` (3 subsequent siblings)
  6 siblings, 1 reply; 62+ messages in thread
From: Randy Dunlap @ 2011-02-09 17:08 UTC (permalink / raw)
  To: Linus Torvalds, x86, Arjan van de Ven; +Cc: Linux Kernel Mailing List


test_nx BUGs.
CONFIG_DEBUG_RODATA=y
(nearly allmodconfig, with a few changes)

Is that expected?


[  132.533559] Testing NX protection
[  132.533583] BUG: unable to handle kernel paging request at ffffffffa05fa178
[  132.533730] IP: [<ffffffffa05f905e>] fudze_exception_table+0x4c/0x58 [test_nx]
[  132.533835] PGD 1a14067 PUD 1a18063 PMD 78b1c067 PTE 800000006cebf161
[  132.534073] Oops: 0003 [#1] SMP DEBUG_PAGEALLOC
[  132.534132] last sysfs file: /sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1.3/devnum
[  132.534138] CPU 0 
[  132.534140] Modules linked in: test_nx(+) af_packet nfsd lockd nfs_acl auth_rpcgss exportfs sunrpc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables x_tables ipv6 cpufreq_ondemand acpi_cpufreq freq_table mperf binfmt_misc dm_mirror dm_region_hash dm_log dm_multipath scsi_dh dm_mod mousedev joydev evdev mac_hid snd_hda_codec_analog snd_hda_intel snd_hda_codec snd_hwdep snd_seq usbmouse snd_seq_device usbkbd usbhid snd_pcm hid 8250_pnp rtc_cmos snd_timer sr_mod pcspkr rtc_core dcdbas i2c_i801 cdrom 8250 snd sg rtc_lib processor tg3 serial_core soundcore thermal_sys intel_agp iTCO_wdt snd_page_alloc button iTCO_vendor_support intel_gtt hwmon unix ide_pci_generic ide_core ata_generic pata_acpi ata_piix sd_mod crc_t10dif ext3 jbd mbcache uhci_hcd ohci_hcd ssb mmc_core pcmcia pcmcia_core firmware_class ehci_hcd usbcore nls_base [last unloaded: microcode]
[  132.534237] 
[  132.534241] Pid: 2526, comm: modprobe Not tainted 2.6.38-rc4 #1 0TY565/OptiPlex 745                 
[  132.534245] RIP: 0010:[<ffffffffa05f905e>]  [<ffffffffa05f905e>] fudze_exception_table+0x4c/0x58 [test_nx]
[  132.534252] RSP: 0018:ffff88006cec1ec8  EFLAGS: 00010246
[  132.534254] RAX: ffffffffa05fa178 RBX: 0000000000000001 RCX: 0000000000000000
[  132.534257] RDX: 0000000000000000 RSI: ffff88006cec1ef8 RDI: ffffffffa05f909d
[  132.534261] RBP: ffff88006cec1ec8 R08: 0000000000000001 R09: 0000000000000000
[  132.534263] R10: 0000000000000000 R11: ffff88006cec1d68 R12: ffff88006cec1ef8
[  132.534266] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[  132.534270] FS:  00007f420c3536f0(0000) GS:ffff88007c400000(0000) knlGS:0000000000000000
[  132.534274] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  132.534277] CR2: ffffffffa05fa178 CR3: 000000006cef0000 CR4: 00000000000006f0
[  132.534280] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  132.534283] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  132.534287] Process modprobe (pid: 2526, threadinfo ffff88006cec0000, task ffff88006ce93000)
[  132.534289] Stack:
[  132.534291]  ffff88006cec1ee8 ffffffffa05f9094 ffffffffa05fb080 ffffffffa05f90d7
[  132.534299]  ffff88006cec1f18 ffffffffa05f911d 00000000000090c3 0000000000000000
[  132.534304]  ffff88006cec1f18 ffffffffa05fb080 ffff88006cec1f48 ffffffff810020e3
[  132.534310] Call Trace:
[  132.534318]  [<ffffffffa05f9094>] test_address+0x2a/0x33 [test_nx]
[  132.534325]  [<ffffffffa05f90d7>] ? test_NX+0x0/0x180 [test_nx]
[  132.534330]  [<ffffffffa05f911d>] test_NX+0x46/0x180 [test_nx]
[  132.534336]  [<ffffffff810020e3>] do_one_initcall+0xa9/0x1ef
[  132.534341]  [<ffffffff810d6674>] sys_init_module+0x12b/0x307
[  132.534345]  [<ffffffff8100e942>] system_call_fastpath+0x16/0x1b
[  132.534347] Code: 00 e8 4b 9d f5 e0 48 c7 c7 53 a0 5f a0 31 c0 48 ff 05 c7 22 00 00 e8 36 9d f5 e0 48 ff 05 c3 22 00 00 eb 11 48 8b 05 62 21 00 00 <48> 89 30 48 ff 05 b8 22 00 00 c9 c3 55 48 89 e5 41 54 53 0f 1f 
[  132.534381] RIP  [<ffffffffa05f905e>] fudze_exception_table+0x4c/0x58 [test_nx]
[  132.534386]  RSP <ffff88006cec1ec8>
[  132.534388] CR2: ffffffffa05fa178
[  132.534392] ---[ end trace c7905109946d6306 ]---

---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Linux 2.6.38-rc4 (test_nx: BUG)
  2011-02-09 17:08 ` Linux 2.6.38-rc4 (test_nx: BUG) Randy Dunlap
@ 2011-02-09 17:10   ` Arjan van de Ven
  2011-02-17 19:33     ` Kees Cook
  0 siblings, 1 reply; 62+ messages in thread
From: Arjan van de Ven @ 2011-02-09 17:10 UTC (permalink / raw)
  To: Randy Dunlap; +Cc: Linus Torvalds, x86, Linux Kernel Mailing List

On 2/9/2011 9:08 AM, Randy Dunlap wrote:
> test_nx BUGs.
> CONFIG_DEBUG_RODATA=y
> (nearly allmodconfig, with a few changes)
>
> Is that expected?
>
this test should pass...
so something broke it (I'll call that a success for the test ;-)



^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Linux 2.6.38-rc4 (hysdn: BUG)
  2011-02-08  0:23 Linux 2.6.38-rc4 Linus Torvalds
                   ` (2 preceding siblings ...)
  2011-02-09 17:08 ` Linux 2.6.38-rc4 (test_nx: BUG) Randy Dunlap
@ 2011-02-09 17:24 ` Randy Dunlap
  2011-02-09 19:44   ` Linus Torvalds
  2011-02-09 17:26 ` Linux 2.6.38-rc4 (tty/ifx6x60: BUG) Randy Dunlap
                   ` (2 subsequent siblings)
  6 siblings, 1 reply; 62+ messages in thread
From: Randy Dunlap @ 2011-02-09 17:24 UTC (permalink / raw)
  To: Linus Torvalds, netdev; +Cc: Linux Kernel Mailing List, Karsten Keil

on x86_64.  no HYSDN hardware found (correct).
Nearly allmodconfig.


[   65.397577] HYSDN: module Rev: 1.6.6.6 loaded
[   65.397584] HYSDN: network interface Rev: 1.8.6.4 
[   65.398057] HYSDN: 0 card(s) found.
[   65.398121] BUG: unable to handle kernel paging request at ffffffffa06c99f0
[   65.398269] IP: [<ffffffffa06c68ba>] hysdn_getrev+0x2e/0x50 [hysdn]
[   65.398379] PGD 1a14067 PUD 1a18063 PMD 6f6c1067 PTE 800000006ce8c161
[   65.398613] Oops: 0003 [#1] SMP DEBUG_PAGEALLOC
[   65.398805] last sysfs file: /sys/devices/pci0000:00/0000:00:1c.4/0000:03:00.0/irq
[   65.398864] CPU 0 
[   65.398913] Modules linked in: hysdn(+) kernelcapi af_packet nfsd lockd nfs_acl auth_rpcgss exportfs sunrpc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables x_tables ipv6 cpufreq_ondemand acpi_cpufreq freq_table mperf binfmt_misc dm_mirror dm_region_hash dm_log dm_multipath scsi_dh dm_mod mousedev joydev evdev mac_hid snd_hda_codec_analog snd_hda_intel snd_hda_codec snd_hwdep snd_seq usbmouse usbkbd snd_seq_device usbhid snd_pcm hid snd_timer 8250_pnp tg3 pcspkr sr_mod rtc_cmos dcdbas sg snd cdrom i2c_i801 rtc_core iTCO_wdt 8250 processor rtc_lib soundcore iTCO_vendor_support serial_core thermal_sys intel_agp snd_page_alloc intel_gtt button hwmon unix ide_pci_generic ide_core ata_generic pata_acpi ata_piix sd_mod crc_t10dif ext3 jbd mbcache uhci_hcd ohci_hcd ssb mmc_core pcmcia pcmcia_core firmware_class ehci_hcd usbcore nls_base [last unloaded: micr!
 ocode]
[   65.400030] 
[   65.400030] Pid: 2497, comm: modprobe Not tainted 2.6.38-rc4 #1 0TY565/OptiPlex 745                 
[   65.400030] RIP: 0010:[<ffffffffa06c68ba>]  [<ffffffffa06c68ba>] hysdn_getrev+0x2e/0x50 [hysdn]
[   65.400030] RSP: 0018:ffff88006eec1e68  EFLAGS: 00010206
[   65.400030] RAX: ffffffffa06c99f1 RBX: ffffffffa06c99e9 RCX: ffff88007c4159a0
[   65.400030] RDX: 000000000c960c24 RSI: 0000000000000024 RDI: ffffffffa06c99e9
[   65.400030] RBP: ffff88006eec1e78 R08: 0000000000000000 R09: 0000000000000000
[   65.400030] R10: 0000000000000000 R11: ffffffff8124698c R12: ffff88006eec1e88
[   65.400030] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[   65.400030] FS:  00007fe1ae6c76f0(0000) GS:ffff88007c400000(0000) knlGS:0000000000000000
[   65.400030] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[   65.400030] CR2: ffffffffa06c99f0 CR3: 000000006eee3000 CR4: 00000000000006f0
[   65.400030] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   65.400030] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[   65.400030] Process modprobe (pid: 2497, threadinfo ffff88006eec0000, task ffff88006cf88000)
[   65.400030] Stack:
[   65.400030]  ffff88006eec1e78 0000000000000000 ffff88006eec1eb8 ffffffffa06c3bf8
[   65.400030]  ffff88006cf88000 0000000000000000 0000000000000000 00000000b3346a0d
[   65.400030]  0000000000000000 ffffffffa062b000 ffff88006eec1f18 ffffffffa062b0e2
[   65.400030] Call Trace:
[   65.400030]  [<ffffffffa06c3bf8>] hysdn_procconf_init+0xf5/0x133 [hysdn]
[   65.400030]  [<ffffffffa062b000>] ? hysdn_init+0x0/0x1000 [hysdn]
[   65.400030]  [<ffffffffa062b0e2>] hysdn_init+0xe2/0x1000 [hysdn]
[   65.400030]  [<ffffffff810020e3>] do_one_initcall+0xa9/0x1ef
[   65.400030]  [<ffffffff810d6674>] sys_init_module+0x12b/0x307
[   65.400030]  [<ffffffff8100e942>] system_call_fastpath+0x16/0x1b
[   65.400030] Code: e5 53 48 83 ec 08 0f 1f 44 00 00 be 3a 00 00 00 e8 71 39 c0 e0 48 85 c0 74 1e 48 8d 58 02 be 24 00 00 00 48 89 df e8 5b 39 c0 e0 <c6> 40 ff 00 48 ff 05 db 79 00 00 eb 0e 48 ff 05 da 79 00 00 48 
[   65.400030] RIP  [<ffffffffa06c68ba>] hysdn_getrev+0x2e/0x50 [hysdn]
[   65.400030]  RSP <ffff88006eec1e68>
[   65.400030] CR2: ffffffffa06c99f0
[   65.400030] ---[ end trace bf14fd4acc41f5a9 ]---

---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Linux 2.6.38-rc4 (tty/ifx6x60: BUG)
  2011-02-08  0:23 Linux 2.6.38-rc4 Linus Torvalds
                   ` (3 preceding siblings ...)
  2011-02-09 17:24 ` Linux 2.6.38-rc4 (hysdn: BUG) Randy Dunlap
@ 2011-02-09 17:26 ` Randy Dunlap
  2011-02-09 18:28   ` Alan Cox
  2011-02-09 17:28 ` Linux 2.6.38-rc4 (target_core: rmmod GP fault) Randy Dunlap
  2011-02-09 17:36 ` Linux 2.6.38-rc4 (other bugs) Randy Dunlap
  6 siblings, 1 reply; 62+ messages in thread
From: Randy Dunlap @ 2011-02-09 17:26 UTC (permalink / raw)
  To: Linus Torvalds, gregkh; +Cc: Linux Kernel Mailing List

x86_64, nearly allmodconfig.


[   86.956907] BUG: unable to handle kernel paging request at ffffffffa062c5d8
[   86.958336] IP: [<ffffffff814461b1>] spi_register_driver+0x15/0x6c
[   86.958349] PGD 1a14067 PUD 1a18063 PMD 6f558067 PTE 800000006ed06161
[   86.958359] Oops: 0003 [#1] SMP DEBUG_PAGEALLOC
[   86.958364] last sysfs file: /sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1.3/devnum
[   86.958370] CPU 0 
[   86.958372] Modules linked in: ifx6x60(+) af_packet nfsd lockd nfs_acl auth_rpcgss exportfs sunrpc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables x_tables ipv6 cpufreq_ondemand acpi_cpufreq freq_table mperf binfmt_misc dm_mirror dm_region_hash dm_log dm_multipath scsi_dh dm_mod mousedev joydev evdev mac_hid snd_hda_codec_analog snd_hda_intel snd_hda_codec snd_hwdep snd_seq usbmouse usbkbd snd_seq_device usbhid hid snd_pcm sr_mod tg3 pcspkr dcdbas 8250_pnp snd_timer rtc_cmos cdrom i2c_i801 sg rtc_core iTCO_wdt snd 8250 iTCO_vendor_support rtc_lib processor serial_core soundcore thermal_sys intel_agp snd_page_alloc intel_gtt hwmon button unix ide_pci_generic ide_core ata_generic pata_acpi ata_piix sd_mod crc_t10dif ext3 jbd mbcache uhci_hcd ohci_hcd ssb mmc_core pcmcia pcmcia_core firmware_class ehci_hcd usbcore nls_base [last unloaded: microcode]
[   86.958466] 
[   86.958471] Pid: 2523, comm: modprobe Not tainted 2.6.38-rc4 #1 0TY565/OptiPlex 745                 
[   86.958474] RIP: 0010:[<ffffffff814461b1>]  [<ffffffff814461b1>] spi_register_driver+0x15/0x6c
[   86.958480] RSP: 0018:ffff88006cd63ef8  EFLAGS: 00010286
[   86.958483] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88006cd63e98
[   86.958487] RDX: 0000000000000000 RSI: 000000143f08b654 RDI: ffffffffa062c5a0
[   86.958490] RBP: ffff88006cd63ef8 R08: 0000000000000000 R09: 0000000000000000
[   86.958493] R10: 0000000000000000 R11: 2222222222222222 R12: ffffffffa01c2000
[   86.958496] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[   86.958501] FS:  00007f71c311a6f0(0000) GS:ffff88007c400000(0000) knlGS:0000000000000000
[   86.958504] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[   86.958507] CR2: ffffffffa062c5d8 CR3: 000000007033a000 CR4: 00000000000006f0
[   86.958511] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   86.958514] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[   86.958518] Process modprobe (pid: 2523, threadinfo ffff88006cd62000, task ffff88006cfa8000)
[   86.958521] Stack:
[   86.958523]  ffff88006cd63f18 ffffffffa01c2133 ffff88006cd63f18 ffffffffa062e140
[   86.958529]  ffff88006cd63f48 ffffffff810020e3 ffffffffa062e140 0000000000000001
[   86.958535]  000000000061b470 0000000000000000 ffff88006cd63f78 ffffffff810d6674
[   86.958541] Call Trace:
[   86.958551]  [<ffffffffa01c2133>] ifx_spi_init+0x133/0x1000 [ifx6x60]
[   86.958557]  [<ffffffff810020e3>] do_one_initcall+0xa9/0x1ef
[   86.958564]  [<ffffffff810d6674>] sys_init_module+0x12b/0x307
[   86.958569]  [<ffffffff8100e942>] system_call_fastpath+0x16/0x1b
[   86.958571] Code: e1 10 00 48 ff 05 e8 b9 94 01 41 58 5b 44 89 e0 41 5c 41 5d c9 c3 55 48 89 e5 0f 1f 44 00 00 48 ff 05 34 bb 94 01 48 83 7f 08 00 <48> c7 47 38 70 75 cb 81 74 0f 48 c7 47 58 f4 50 44 81 48 ff 05 
[   86.958613] RIP  [<ffffffff814461b1>] spi_register_driver+0x15/0x6c
[   86.958617]  RSP <ffff88006cd63ef8>
[   86.958620] CR2: ffffffffa062c5d8
[   86.958625] ---[ end trace 99fc207b918ffa02 ]---

---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Linux 2.6.38-rc4 (target_core: rmmod GP fault)
  2011-02-08  0:23 Linux 2.6.38-rc4 Linus Torvalds
                   ` (4 preceding siblings ...)
  2011-02-09 17:26 ` Linux 2.6.38-rc4 (tty/ifx6x60: BUG) Randy Dunlap
@ 2011-02-09 17:28 ` Randy Dunlap
  2011-02-09 19:00   ` Linus Torvalds
  2011-02-09 17:36 ` Linux 2.6.38-rc4 (other bugs) Randy Dunlap
  6 siblings, 1 reply; 62+ messages in thread
From: Randy Dunlap @ 2011-02-09 17:28 UTC (permalink / raw)
  To: Linus Torvalds, scsi; +Cc: Linux Kernel Mailing List

x86_64, nearly allmodconfig.  No target hardware.


[  144.508473] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC
[  144.509901] last sysfs file: /sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1.3/devnum
[  144.512026] CPU 1 
[  144.512026] Modules linked in: target_core_mod(-) configfs af_packet nfsd lockd nfs_acl auth_rpcgss exportfs sunrpc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables x_tables ipv6 cpufreq_ondemand acpi_cpufreq freq_table mperf binfmt_misc dm_mirror dm_region_hash dm_log dm_multipath scsi_dh dm_mod mousedev joydev evdev mac_hid snd_hda_codec_analog usbmouse snd_hda_intel snd_hda_codec usbkbd usbhid hid snd_hwdep snd_seq 8250_pnp snd_seq_device dcdbas pcspkr sr_mod i2c_i801 cdrom tg3 sg iTCO_wdt snd_pcm 8250 iTCO_vendor_support rtc_cmos serial_core rtc_core snd_timer rtc_lib snd processor button thermal_sys soundcore intel_agp hwmon snd_page_alloc intel_gtt unix ide_pci_generic ide_core ata_generic pata_acpi ata_piix sd_mod crc_t10dif ext3 jbd mbcache uhci_hcd ohci_hcd ssb mmc_core pcmcia pcmcia_core firmware_class ehci_hcd usbcore nls_base [last unload!
 ed: microcode]
[  144.512026] 
[  144.512026] Pid: 2597, comm: rmmod Not tainted 2.6.38-rc4 #1 0TY565/OptiPlex 745                 
[  144.512026] RIP: 0010:[<ffffffff810c3e5f>]  [<ffffffff810c3e5f>] __lock_acquire+0xd8/0x4e8
[  144.512026] RSP: 0018:ffff88006df1bb78  EFLAGS: 00010006
[  144.512026] RAX: 0000000000000002 RBX: 6b6b6b6b6b6b6be3 RCX: 0000000000000000
[  144.512026] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 6b6b6b6b6b6b6be3
[  144.512026] RBP: ffff88006df1bbd8 R08: 0000000000000001 R09: 0000000000000000
[  144.512026] R10: 0000000000000006 R11: ffffffffa06ab0ef R12: 0000000000000000
[  144.512026] R13: ffff88006dec3000 R14: 0000000000000000 R15: 0000000000000000
[  144.512026] FS:  00007fe0320d36f0(0000) GS:ffff88007c600000(0000) knlGS:0000000000000000
[  144.512026] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  144.512026] CR2: 0000003fadc7bf20 CR3: 000000006de4f000 CR4: 00000000000006e0
[  144.512026] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  144.512026] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  144.512026] Process rmmod (pid: 2597, threadinfo ffff88006df1a000, task ffff88006dec3000)
[  144.512026] Stack:
[  144.512026]  0000000000000118 ffff8800000003a7 0000000000000005 00000000810b175b
[  144.512026]  ffff88006df1bba8 0000000000000000 ffff88006dec3000 0000000000000000
[  144.512026]  ffff88006dec3000 ffffffffa06ab0ef 0000000000000001 0000000000000000
[  144.512026] Call Trace:
[  144.512026]  [<ffffffffa06ab0ef>] ? spin_lock+0x15/0x1e [configfs]
[  144.512026]  [<ffffffff810c436f>] lock_acquire+0x100/0x150
[  144.512026]  [<ffffffffa06ab0ef>] ? spin_lock+0x15/0x1e [configfs]
[  144.512026]  [<ffffffffa06ac40f>] ? detach_groups+0x91/0x12e [configfs]
[  144.512026]  [<ffffffffa06ac40f>] ? detach_groups+0x91/0x12e [configfs]
[  144.512026]  [<ffffffff81556300>] _raw_spin_lock+0x44/0xaf
[  144.512026]  [<ffffffffa06ab0ef>] ? spin_lock+0x15/0x1e [configfs]
[  144.512026]  [<ffffffff810c47db>] ? lock_release_nested+0xfb/0x133
[  144.512026]  [<ffffffffa06ab0ef>] spin_lock+0x15/0x1e [configfs]
[  144.512026]  [<ffffffffa06ab144>] dget+0x2e/0x56 [configfs]
[  144.512026]  [<ffffffffa06ac3a4>] detach_groups+0x26/0x12e [configfs]
[  144.512026]  [<ffffffffa06ac363>] configfs_detach_group+0x2d/0x48 [configfs]
[  144.512026]  [<ffffffffa06ac41f>] detach_groups+0xa1/0x12e [configfs]
[  144.512026]  [<ffffffffa06ac363>] configfs_detach_group+0x2d/0x48 [configfs]
[  144.512026]  [<ffffffffa06ac41f>] detach_groups+0xa1/0x12e [configfs]
[  144.512026]  [<ffffffffa06ac363>] configfs_detach_group+0x2d/0x48 [configfs]
[  144.512026]  [<ffffffffa06ac41f>] detach_groups+0xa1/0x12e [configfs]
[  144.512026]  [<ffffffffa06ac363>] configfs_detach_group+0x2d/0x48 [configfs]
[  144.512026]  [<ffffffffa06ac41f>] detach_groups+0xa1/0x12e [configfs]
[  144.512026]  [<ffffffffa06ac363>] configfs_detach_group+0x2d/0x48 [configfs]
[  144.512026]  [<ffffffffa06ace26>] configfs_unregister_subsystem+0x105/0x194 [configfs]
[  144.512026]  [<ffffffffa06baf55>] target_core_exit_configfs+0x185/0x1eb [target_core_mod]
[  144.512026]  [<ffffffff810d46a8>] sys_delete_module+0x2d6/0x368
[  144.512026]  [<ffffffff8155602d>] ? lockdep_sys_exit_thunk+0x35/0x67
[  144.512026]  [<ffffffff81555fb7>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[  144.512026]  [<ffffffff8100e942>] system_call_fastpath+0x16/0x1b
[  144.512026] Code: 05 8f 32 8d 01 e8 6c b1 fb ff 48 ff 05 8b 32 8d 01 48 ff 05 8c 32 8d 01 48 ff 05 95 32 8d 01 e9 e3 03 00 00 48 ff 05 81 32 8d 01 <48> 81 3b 40 5f 26 82 75 07 48 ff 05 81 32 8d 01 83 fe 01 77 13 
[  144.512026] RIP  [<ffffffff810c3e5f>] __lock_acquire+0xd8/0x4e8
[  144.512026]  RSP <ffff88006df1bb78>
[  144.512026] ---[ end trace 37e0ba5347875330 ]---

---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Linux 2.6.38-rc4 (other bugs)
  2011-02-08  0:23 Linux 2.6.38-rc4 Linus Torvalds
                   ` (5 preceding siblings ...)
  2011-02-09 17:28 ` Linux 2.6.38-rc4 (target_core: rmmod GP fault) Randy Dunlap
@ 2011-02-09 17:36 ` Randy Dunlap
  2011-02-09 22:01   ` David Miller
  2011-02-10 19:34   ` Linux 2.6.38-rc4 (other bugs: ipmi Oops) Randy Dunlap
  6 siblings, 2 replies; 62+ messages in thread
From: Randy Dunlap @ 2011-02-09 17:36 UTC (permalink / raw)
  To: Linus Torvalds; +Cc: Linux Kernel Mailing List


There are also bugs or other oopses etc. with ipmi, x25 (rmmod hangs system),
and (usb gadget) g_audio, but I don't have logs for them yet...
Someone else could do those.

Oh, and ext4, which was reported on the ext4 mailing list.

---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Linux 2.6.38-rc4 (tty/ifx6x60: BUG)
  2011-02-09 17:26 ` Linux 2.6.38-rc4 (tty/ifx6x60: BUG) Randy Dunlap
@ 2011-02-09 18:28   ` Alan Cox
  0 siblings, 0 replies; 62+ messages in thread
From: Alan Cox @ 2011-02-09 18:28 UTC (permalink / raw)
  To: Randy Dunlap; +Cc: Linus Torvalds, gregkh, Linux Kernel Mailing List

On Wed, 9 Feb 2011 09:26:33 -0800
Randy Dunlap <randy.dunlap@oracle.com> wrote:

> x86_64, nearly allmodconfig.

Russ posted a set of updates for ifx6x60 a while back which fix this (2nd
Feb was the first posting of it)




^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Linux 2.6.38-rc4 (target_core: rmmod GP fault)
  2011-02-09 17:28 ` Linux 2.6.38-rc4 (target_core: rmmod GP fault) Randy Dunlap
@ 2011-02-09 19:00   ` Linus Torvalds
  2011-02-09 20:02     ` Nicholas A. Bellinger
  0 siblings, 1 reply; 62+ messages in thread
From: Linus Torvalds @ 2011-02-09 19:00 UTC (permalink / raw)
  To: Randy Dunlap, Nicholas Bellinger, Joel Becker, James Bottomley
  Cc: scsi, Linux Kernel Mailing List

On Wed, Feb 9, 2011 at 9:28 AM, Randy Dunlap <randy.dunlap@oracle.com> wrote:
> x86_64, nearly allmodconfig.  No target hardware.
>
>
> [  144.508473] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC
> [  144.509901] last sysfs file: /sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1.3/devnum
> [  144.512026] CPU 1
> [  144.512026]
> [  144.512026] Pid: 2597, comm: rmmod Not tainted 2.6.38-rc4 #1 0TY565/OptiPlex 745
> [  144.512026] RIP: 0010:[<ffffffff810c3e5f>]  [<ffffffff810c3e5f>] __lock_acquire+0xd8/0x4e8
> [  144.512026] RSP: 0018:ffff88006df1bb78  EFLAGS: 00010006
> [  144.512026] RAX: 0000000000000002 RBX: 6b6b6b6b6b6b6be3 RCX: 0000000000000000

The code disassembles to

   0:	8d 01                	lea    (%rcx),%eax
   2:	e8 6c b1 fb ff       	callq  0xfffffffffffbb173
   7:	48 ff 05 8b 32 8d 01 	incq   0x18d328b(%rip)        # 0x18d3299
   e:	48 ff 05 8c 32 8d 01 	incq   0x18d328c(%rip)        # 0x18d32a1
  15:	48 ff 05 95 32 8d 01 	incq   0x18d3295(%rip)        # 0x18d32b1
  1c:	e9 e3 03 00 00       	jmpq   0x404
  21:	48 ff 05 81 32 8d 01 	incq   0x18d3281(%rip)        # 0x18d32a9
  28:*	48 81 3b 40 5f 26 82 	cmpq   $0xffffffff82265f40,(%rbx)     <--
trapping instruction
  2f:	75 07                	jne    0x38
  31:	48 ff 05 81 32 8d 01 	incq   0x18d3281(%rip)        # 0x18d32b9
  38:	83 fe 01             	cmp    $0x1,%esi

and %rbx (and %rdi) contains the poison pattern for free'd memory (0x6b6b6b..).

> [  144.512026] Process rmmod (pid: 2597, threadinfo ffff88006df1a000, task ffff88006dec3000)

.. and that's likely not a very commonly tested case.

> [  144.512026]  [<ffffffffa06ace26>] configfs_unregister_subsystem+0x105/0x194 [configfs]
> [  144.512026]  [<ffffffffa06baf55>] target_core_exit_configfs+0x185/0x1eb [target_core_mod]
> [  144.512026]  [<ffffffff810d46a8>] sys_delete_module+0x2d6/0x368

The target_core_exit_configfs() code looks _very_ broken. It looks
broken for two reasons:

 - it's very different from the cleanup code for the "failed to init"
case in target_core_init_configfs, which does a lot less (see the
"out:" code there)

 - it seems to do a lot of manual freeing of the
"su_group.default_groups" stuff etc, which is all internal configfs
stuff, and seems to be used by the register/unregister phases.

So somebody show knows configfs better should really check that
cleanup, but it looks like target-core is just totally broken for the
rmmod case.

Added more people to the cc. Nicholas, Joel and James. Guys: please
check the insmod/rmmod case with
 (a) spinlock debugging and lockdep enabled
 (b) SLUB poisoning enabled.
ie all of these should be on:

  CONFIG_SLUB_DEBUG_ON=y
  CONFIG_DEBUG_SPINLOCK=y
  CONFIG_DEBUG_MUTEXES=y
  CONFIG_DEBUG_LOCK_ALLOC=y
  CONFIG_PROVE_LOCKING=y
  CONFIG_LOCKDEP=y
  CONFIG_DEBUG_LOCKDEP=y
  CONFIG_TRACE_IRQFLAGS=y
  CONFIG_DEBUG_SPINLOCK_SLEEP=y
  CONFIG_STACKTRACE=y

and you might also want to add CONFIG_DEBUG_PAGEALLOC to the mix.

                        Linus

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Linux 2.6.38-rc4 (hysdn: BUG)
  2011-02-09 17:24 ` Linux 2.6.38-rc4 (hysdn: BUG) Randy Dunlap
@ 2011-02-09 19:44   ` Linus Torvalds
  2011-02-09 21:25     ` Randy Dunlap
  0 siblings, 1 reply; 62+ messages in thread
From: Linus Torvalds @ 2011-02-09 19:44 UTC (permalink / raw)
  To: Randy Dunlap; +Cc: netdev, Linux Kernel Mailing List, Karsten Keil

[-- Attachment #1: Type: text/plain, Size: 2424 bytes --]

On Wed, Feb 9, 2011 at 9:24 AM, Randy Dunlap <randy.dunlap@oracle.com> wrote:
>
> on x86_64.  no HYSDN hardware found (correct).
> Nearly allmodconfig.
>
>
> [   65.397577] HYSDN: module Rev: 1.6.6.6 loaded
> [   65.397584] HYSDN: network interface Rev: 1.8.6.4
> [   65.398057] HYSDN: 0 card(s) found.
> [   65.398121] BUG: unable to handle kernel paging request at ffffffffa06c99f0
> [   65.398269] IP: [<ffffffffa06c68ba>] hysdn_getrev+0x2e/0x50 [hysdn]
> [   65.398379] PGD 1a14067 PUD 1a18063 PMD 6f6c1067 PTE 800000006ce8c161
> [   65.398613] Oops: 0003 [#1] SMP DEBUG_PAGEALLOC
> [   65.400030]
> [   65.400030] Pid: 2497, comm: modprobe Not tainted 2.6.38-rc4 #1 0TY565/OptiPlex 745
> [   65.400030] RIP: 0010:[<ffffffffa06c68ba>]  [<ffffffffa06c68ba>] hysdn_getrev+0x2e/0x50 [hysdn]
> [   65.400030] RSP: 0018:ffff88006eec1e68  EFLAGS: 00010206
> [   65.400030] RAX: ffffffffa06c99f1 RBX: ffffffffa06c99e9 RCX: ffff88007c4159a0

The instruction sequence decodes to

  1e:	be 24 00 00 00       	mov    $0x24,%esi
  23:	48 89 df             	mov    %rbx,%rdi
  26:	e8 5b 39 c0 e0       	callq  0xffffffffe0c03986
  2b:*	c6 40 ff 00          	movb   $0x0,-0x1(%rax)     <-- trapping instruction

which seems to be this

                p = strchr(rev, '$');
                *--p = 0;

code. And yes, it's total crap, because while "p" and "rev" are "char
*", the string that is passed in is actually of type "const char *",
so that function is seriously broken. It's also seriously broken to
not test that "p" is non-NULL - the function would just break if there
is a colon in the string but not a '$'.

And hysdn_procconf_init() passes in a constant string to the thing:

    static char *hysdn_procconf_revision = "$Revision: 1.8.6.4 $";

What happens is that it breaks when we mark the constant section as
read-only, because you have CONFIG_DEBUG_RODATA enabled.

So the fix seems to be to
 - fix the prototype for hysdn_getrev() to not have "const".
 - fix hysdn_procconf_init() to not pass in a constant string to it

The minimal patch would appear to be something like the appended. UNTESTED!

Btw, all of this code seems to go back to before the git history even
started, so it doesn't seem to be new. I assume you haven't tried
booting these all-module kernels before? Or is it just the
DEBUG_RODATA thing that is new for you?

                    Linus

[-- Attachment #2: patch.diff --]
[-- Type: text/x-patch, Size: 1685 bytes --]

 drivers/isdn/hysdn/hysdn_defs.h     |    2 +-
 drivers/isdn/hysdn/hysdn_init.c     |    2 +-
 drivers/isdn/hysdn/hysdn_procconf.c |    2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/isdn/hysdn/hysdn_defs.h b/drivers/isdn/hysdn/hysdn_defs.h
index 729df40..d21b4a0 100644
--- a/drivers/isdn/hysdn/hysdn_defs.h
+++ b/drivers/isdn/hysdn/hysdn_defs.h
@@ -227,7 +227,7 @@ extern hysdn_card *card_root;	/* pointer to first card */
 /*************************/
 /* im/exported functions */
 /*************************/
-extern char *hysdn_getrev(const char *);
+extern char *hysdn_getrev(char *);
 
 /* hysdn_procconf.c */
 extern int hysdn_procconf_init(void);	/* init proc config filesys */
diff --git a/drivers/isdn/hysdn/hysdn_init.c b/drivers/isdn/hysdn/hysdn_init.c
index b7cc5c2..4ba2123 100644
--- a/drivers/isdn/hysdn/hysdn_init.c
+++ b/drivers/isdn/hysdn/hysdn_init.c
@@ -53,7 +53,7 @@ static hysdn_card *card_last = NULL;	/* pointer to first card */
 /* extract revision number from string for log output */
 /******************************************************/
 char *
-hysdn_getrev(const char *revision)
+hysdn_getrev(char *revision)
 {
 	char *rev;
 	char *p;
diff --git a/drivers/isdn/hysdn/hysdn_procconf.c b/drivers/isdn/hysdn/hysdn_procconf.c
index 96b3e39..1c396e1 100644
--- a/drivers/isdn/hysdn/hysdn_procconf.c
+++ b/drivers/isdn/hysdn/hysdn_procconf.c
@@ -23,7 +23,7 @@
 #include "hysdn_defs.h"
 
 static DEFINE_MUTEX(hysdn_conf_mutex);
-static char *hysdn_procconf_revision = "$Revision: 1.8.6.4 $";
+static char hysdn_procconf_revision[] = "$Revision: 1.8.6.4 $";
 
 #define INFO_OUT_LEN 80		/* length of info line including lf */
 

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Linux 2.6.38-rc4 (target_core: rmmod GP fault)
  2011-02-09 19:00   ` Linus Torvalds
@ 2011-02-09 20:02     ` Nicholas A. Bellinger
  2011-02-09 20:13       ` James Bottomley
  0 siblings, 1 reply; 62+ messages in thread
From: Nicholas A. Bellinger @ 2011-02-09 20:02 UTC (permalink / raw)
  To: Linus Torvalds
  Cc: Randy Dunlap, Joel Becker, James Bottomley, scsi,
	Linux Kernel Mailing List

On Wed, 2011-02-09 at 11:00 -0800, Linus Torvalds wrote:
> On Wed, Feb 9, 2011 at 9:28 AM, Randy Dunlap <randy.dunlap@oracle.com> wrote:
> > x86_64, nearly allmodconfig.  No target hardware.
> >
> >
> > [  144.508473] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC
> > [  144.509901] last sysfs file: /sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1.3/devnum
> > [  144.512026] CPU 1
> > [  144.512026]
> > [  144.512026] Pid: 2597, comm: rmmod Not tainted 2.6.38-rc4 #1 0TY565/OptiPlex 745
> > [  144.512026] RIP: 0010:[<ffffffff810c3e5f>]  [<ffffffff810c3e5f>] __lock_acquire+0xd8/0x4e8
> > [  144.512026] RSP: 0018:ffff88006df1bb78  EFLAGS: 00010006
> > [  144.512026] RAX: 0000000000000002 RBX: 6b6b6b6b6b6b6be3 RCX: 0000000000000000
> 
> The code disassembles to
> 
>    0:	8d 01                	lea    (%rcx),%eax
>    2:	e8 6c b1 fb ff       	callq  0xfffffffffffbb173
>    7:	48 ff 05 8b 32 8d 01 	incq   0x18d328b(%rip)        # 0x18d3299
>    e:	48 ff 05 8c 32 8d 01 	incq   0x18d328c(%rip)        # 0x18d32a1
>   15:	48 ff 05 95 32 8d 01 	incq   0x18d3295(%rip)        # 0x18d32b1
>   1c:	e9 e3 03 00 00       	jmpq   0x404
>   21:	48 ff 05 81 32 8d 01 	incq   0x18d3281(%rip)        # 0x18d32a9
>   28:*	48 81 3b 40 5f 26 82 	cmpq   $0xffffffff82265f40,(%rbx)     <--
> trapping instruction
>   2f:	75 07                	jne    0x38
>   31:	48 ff 05 81 32 8d 01 	incq   0x18d3281(%rip)        # 0x18d32b9
>   38:	83 fe 01             	cmp    $0x1,%esi
> 
> and %rbx (and %rdi) contains the poison pattern for free'd memory (0x6b6b6b..).
> 
> > [  144.512026] Process rmmod (pid: 2597, threadinfo ffff88006df1a000, task ffff88006dec3000)
> 
> .. and that's likely not a very commonly tested case.
> 
> > [  144.512026]  [<ffffffffa06ace26>] configfs_unregister_subsystem+0x105/0x194 [configfs]
> > [  144.512026]  [<ffffffffa06baf55>] target_core_exit_configfs+0x185/0x1eb [target_core_mod]
> > [  144.512026]  [<ffffffff810d46a8>] sys_delete_module+0x2d6/0x368
> 
> The target_core_exit_configfs() code looks _very_ broken. It looks
> broken for two reasons:
> 
>  - it's very different from the cleanup code for the "failed to init"
> case in target_core_init_configfs, which does a lot less (see the
> "out:" code there)
> 

When registering a top level struct configfs_subsystem to appear under

	/sys/kernel/config/$SUBSYSTEM

the releasing of the top-level default group via
configfs_unregister_subsystem() during a failure in
target_core_init_configfs() is done for us, but we are still missing the
extra config_item_put()'s on the sub top-level groups (Joel, please
correct me)

The original 'out:' failure path code does not call config_item_put() on
these default groups, because config_group_init_type_name() has only
initialized struct config_group until configfs_register_subsystem() is
called to register the top level struct config_subsystem.

With the current 'out:' path being broken, to address the first point I
think moving the following code chunk in target_core_init_configfs to
before the configfs_register_subsystem() would make sense so that
configfs_register_subsystem() will fail last:

        /*
         * Register built-in RAMDISK subsystem logic for virtual LUN 0
         */
        ret = rd_module_init();
        if (ret < 0)
                goto out;

        if (core_dev_setup_virtual_lun0() < 0)
                goto out;

        return 0;

However looking at fs/configfs/dir.c:configfs_register_subsystem(), I
think the caller is still expected to release any sub top-level struct
config_group->default_groups[] w/ config_item_put() even though
unlink_group() is called from the configfs_attach_group() failure path..
(Joel..?)

>  - it seems to do a lot of manual freeing of the
> "su_group.default_groups" stuff etc, which is all internal configfs
> stuff, and seems to be used by the register/unregister phases.
> 

The specific issue rmmod with SLUB poisioning had been reported by Fubo
Chen to linux-scsi in the last weeks.  The patch to address the proper
release of the top-level + sub top-level struct configfs_subsystem's
default_groups in target_core_exit_configfs() has been committed into
the upstream tree in lio-core-2.6.git/linus-38-rc3 and sent out to
linux-scsi here:

[PATCH] target: Fix top-level configfs_subsystem default_group shutdown breakage
http://marc.info/?l=linux-scsi&m=129662389218924&w=2

> So somebody show knows configfs better should really check that
> cleanup, but it looks like target-core is just totally broken for the
> rmmod case.
> 
> Added more people to the cc. Nicholas, Joel and James. Guys: please
> check the insmod/rmmod case with
>  (a) spinlock debugging and lockdep enabled
>  (b) SLUB poisoning enabled.
> ie all of these should be on:
> 
>   CONFIG_SLUB_DEBUG_ON=y
>   CONFIG_DEBUG_SPINLOCK=y
>   CONFIG_DEBUG_MUTEXES=y
>   CONFIG_DEBUG_LOCK_ALLOC=y
>   CONFIG_PROVE_LOCKING=y
>   CONFIG_LOCKDEP=y
>   CONFIG_DEBUG_LOCKDEP=y
>   CONFIG_TRACE_IRQFLAGS=y
>   CONFIG_DEBUG_SPINLOCK_SLEEP=y
>   CONFIG_STACKTRACE=y
> 
> and you might also want to add CONFIG_DEBUG_PAGEALLOC to the mix.
> 

<nod>  I believe the above patch resolves the specific rmmod issue.
However, during SLUB poisioning testing we also came across errors with
the incorrect use of struct config_item_operations->release() in
target_core_configfs.c and target_core_fabric_configfs.c code.  The
series to address these was included in the last series to James here:

[PATCH 00/12] target: Updates for .38-rc4
http://marc.info/?l=linux-scsi&m=129680191624837&w=2

Note that this series for-38 mainline needs to be applied on top of the
original update series after the drivers/target/ mainline merge:

[PATCH 00/24] target updates for .38-rc3 (v2)
http://marc.info/?l=linux-scsi&m=129632617326015&w=2

The entire series is available from
     
   git://git.kernel.org/pub/scm/linux/kernel/git/nab/scsi-post-merge-2.6.git for-38-rc4

James, please review + sign-off so we can get these updates into mainline.


^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Linux 2.6.38-rc4 (target_core: rmmod GP fault)
  2011-02-09 20:02     ` Nicholas A. Bellinger
@ 2011-02-09 20:13       ` James Bottomley
  2011-02-09 20:20         ` Nicholas A. Bellinger
  0 siblings, 1 reply; 62+ messages in thread
From: James Bottomley @ 2011-02-09 20:13 UTC (permalink / raw)
  To: Nicholas A. Bellinger
  Cc: Linus Torvalds, Randy Dunlap, Joel Becker, scsi,
	Linux Kernel Mailing List

On Wed, 2011-02-09 at 12:02 -0800, Nicholas A. Bellinger wrote:
> On Wed, 2011-02-09 at 11:00 -0800, Linus Torvalds wrote:
> > On Wed, Feb 9, 2011 at 9:28 AM, Randy Dunlap <randy.dunlap@oracle.com> wrote:
> > > x86_64, nearly allmodconfig.  No target hardware.
> > >
> > >
> > > [  144.508473] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC
> > > [  144.509901] last sysfs file: /sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1.3/devnum
> > > [  144.512026] CPU 1
> > > [  144.512026]
> > > [  144.512026] Pid: 2597, comm: rmmod Not tainted 2.6.38-rc4 #1 0TY565/OptiPlex 745
> > > [  144.512026] RIP: 0010:[<ffffffff810c3e5f>]  [<ffffffff810c3e5f>] __lock_acquire+0xd8/0x4e8
> > > [  144.512026] RSP: 0018:ffff88006df1bb78  EFLAGS: 00010006
> > > [  144.512026] RAX: 0000000000000002 RBX: 6b6b6b6b6b6b6be3 RCX: 0000000000000000
> > 
> > The code disassembles to
> > 
> >    0:	8d 01                	lea    (%rcx),%eax
> >    2:	e8 6c b1 fb ff       	callq  0xfffffffffffbb173
> >    7:	48 ff 05 8b 32 8d 01 	incq   0x18d328b(%rip)        # 0x18d3299
> >    e:	48 ff 05 8c 32 8d 01 	incq   0x18d328c(%rip)        # 0x18d32a1
> >   15:	48 ff 05 95 32 8d 01 	incq   0x18d3295(%rip)        # 0x18d32b1
> >   1c:	e9 e3 03 00 00       	jmpq   0x404
> >   21:	48 ff 05 81 32 8d 01 	incq   0x18d3281(%rip)        # 0x18d32a9
> >   28:*	48 81 3b 40 5f 26 82 	cmpq   $0xffffffff82265f40,(%rbx)     <--
> > trapping instruction
> >   2f:	75 07                	jne    0x38
> >   31:	48 ff 05 81 32 8d 01 	incq   0x18d3281(%rip)        # 0x18d32b9
> >   38:	83 fe 01             	cmp    $0x1,%esi
> > 
> > and %rbx (and %rdi) contains the poison pattern for free'd memory (0x6b6b6b..).
> > 
> > > [  144.512026] Process rmmod (pid: 2597, threadinfo ffff88006df1a000, task ffff88006dec3000)
> > 
> > .. and that's likely not a very commonly tested case.
> > 
> > > [  144.512026]  [<ffffffffa06ace26>] configfs_unregister_subsystem+0x105/0x194 [configfs]
> > > [  144.512026]  [<ffffffffa06baf55>] target_core_exit_configfs+0x185/0x1eb [target_core_mod]
> > > [  144.512026]  [<ffffffff810d46a8>] sys_delete_module+0x2d6/0x368
> > 
> > The target_core_exit_configfs() code looks _very_ broken. It looks
> > broken for two reasons:
> > 
> >  - it's very different from the cleanup code for the "failed to init"
> > case in target_core_init_configfs, which does a lot less (see the
> > "out:" code there)
> > 
> 
> When registering a top level struct configfs_subsystem to appear under
> 
> 	/sys/kernel/config/$SUBSYSTEM
> 
> the releasing of the top-level default group via
> configfs_unregister_subsystem() during a failure in
> target_core_init_configfs() is done for us, but we are still missing the
> extra config_item_put()'s on the sub top-level groups (Joel, please
> correct me)
> 
> The original 'out:' failure path code does not call config_item_put() on
> these default groups, because config_group_init_type_name() has only
> initialized struct config_group until configfs_register_subsystem() is
> called to register the top level struct config_subsystem.
> 
> With the current 'out:' path being broken, to address the first point I
> think moving the following code chunk in target_core_init_configfs to
> before the configfs_register_subsystem() would make sense so that
> configfs_register_subsystem() will fail last:
> 
>         /*
>          * Register built-in RAMDISK subsystem logic for virtual LUN 0
>          */
>         ret = rd_module_init();
>         if (ret < 0)
>                 goto out;
> 
>         if (core_dev_setup_virtual_lun0() < 0)
>                 goto out;
> 
>         return 0;
> 
> However looking at fs/configfs/dir.c:configfs_register_subsystem(), I
> think the caller is still expected to release any sub top-level struct
> config_group->default_groups[] w/ config_item_put() even though
> unlink_group() is called from the configfs_attach_group() failure path..
> (Joel..?)
> 
> >  - it seems to do a lot of manual freeing of the
> > "su_group.default_groups" stuff etc, which is all internal configfs
> > stuff, and seems to be used by the register/unregister phases.
> > 
> 
> The specific issue rmmod with SLUB poisioning had been reported by Fubo
> Chen to linux-scsi in the last weeks.  The patch to address the proper
> release of the top-level + sub top-level struct configfs_subsystem's
> default_groups in target_core_exit_configfs() has been committed into
> the upstream tree in lio-core-2.6.git/linus-38-rc3 and sent out to
> linux-scsi here:
> 
> [PATCH] target: Fix top-level configfs_subsystem default_group shutdown breakage
> http://marc.info/?l=linux-scsi&m=129662389218924&w=2
> 
> > So somebody show knows configfs better should really check that
> > cleanup, but it looks like target-core is just totally broken for the
> > rmmod case.
> > 
> > Added more people to the cc. Nicholas, Joel and James. Guys: please
> > check the insmod/rmmod case with
> >  (a) spinlock debugging and lockdep enabled
> >  (b) SLUB poisoning enabled.
> > ie all of these should be on:
> > 
> >   CONFIG_SLUB_DEBUG_ON=y
> >   CONFIG_DEBUG_SPINLOCK=y
> >   CONFIG_DEBUG_MUTEXES=y
> >   CONFIG_DEBUG_LOCK_ALLOC=y
> >   CONFIG_PROVE_LOCKING=y
> >   CONFIG_LOCKDEP=y
> >   CONFIG_DEBUG_LOCKDEP=y
> >   CONFIG_TRACE_IRQFLAGS=y
> >   CONFIG_DEBUG_SPINLOCK_SLEEP=y
> >   CONFIG_STACKTRACE=y
> > 
> > and you might also want to add CONFIG_DEBUG_PAGEALLOC to the mix.
> > 
> 
> <nod>  I believe the above patch resolves the specific rmmod issue.
> However, during SLUB poisioning testing we also came across errors with
> the incorrect use of struct config_item_operations->release() in
> target_core_configfs.c and target_core_fabric_configfs.c code.  The
> series to address these was included in the last series to James here:
> 
> [PATCH 00/12] target: Updates for .38-rc4
> http://marc.info/?l=linux-scsi&m=129680191624837&w=2
> 
> Note that this series for-38 mainline needs to be applied on top of the
> original update series after the drivers/target/ mainline merge:
> 
> [PATCH 00/24] target updates for .38-rc3 (v2)
> http://marc.info/?l=linux-scsi&m=129632617326015&w=2
> 
> The entire series is available from
>      
>    git://git.kernel.org/pub/scm/linux/kernel/git/nab/scsi-post-merge-2.6.git for-38-rc4
> 
> James, please review + sign-off so we can get these updates into mainline.

Firstly, could we get the serious bug fixes identified and separated
from the general enhancement updates, so they can go in a fixes tree
without depending on enhancements?  The former category would include
the /proc interface removal, since we don't want the legacy interface to
be in a released kernel.

James



^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Linux 2.6.38-rc4 (target_core: rmmod GP fault)
  2011-02-09 20:13       ` James Bottomley
@ 2011-02-09 20:20         ` Nicholas A. Bellinger
  2011-02-09 20:28           ` James Bottomley
  0 siblings, 1 reply; 62+ messages in thread
From: Nicholas A. Bellinger @ 2011-02-09 20:20 UTC (permalink / raw)
  To: James Bottomley
  Cc: Linus Torvalds, Randy Dunlap, Joel Becker, scsi,
	Linux Kernel Mailing List

On Wed, 2011-02-09 at 14:13 -0600, James Bottomley wrote:
> On Wed, 2011-02-09 at 12:02 -0800, Nicholas A. Bellinger wrote:
> > On Wed, 2011-02-09 at 11:00 -0800, Linus Torvalds wrote:
> > > On Wed, Feb 9, 2011 at 9:28 AM, Randy Dunlap <randy.dunlap@oracle.com> wrote:
> > > > x86_64, nearly allmodconfig.  No target hardware.

<SNIP>

> > <nod>  I believe the above patch resolves the specific rmmod issue.
> > However, during SLUB poisioning testing we also came across errors with
> > the incorrect use of struct config_item_operations->release() in
> > target_core_configfs.c and target_core_fabric_configfs.c code.  The
> > series to address these was included in the last series to James here:
> > 
> > [PATCH 00/12] target: Updates for .38-rc4
> > http://marc.info/?l=linux-scsi&m=129680191624837&w=2
> > 
> > Note that this series for-38 mainline needs to be applied on top of the
> > original update series after the drivers/target/ mainline merge:
> > 
> > [PATCH 00/24] target updates for .38-rc3 (v2)
> > http://marc.info/?l=linux-scsi&m=129632617326015&w=2
> > 
> > The entire series is available from
> >      
> >    git://git.kernel.org/pub/scm/linux/kernel/git/nab/scsi-post-merge-2.6.git for-38-rc4
> > 
> > James, please review + sign-off so we can get these updates into mainline.
> 
> Firstly, could we get the serious bug fixes identified and separated
> from the general enhancement updates, so they can go in a fixes tree
> without depending on enhancements?  The former category would include
> the /proc interface removal, since we don't want the legacy interface to
> be in a released kernel.
> 

Everything in those two series should be considered bug fixes and
immediate for-38 mainline material.

The target_core_mib.c statistics logic using procfs seq_list() has been
removed in [PATCH 12/12] of the most recent series above.

Thanks,

--nab



^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Linux 2.6.38-rc4 (target_core: rmmod GP fault)
  2011-02-09 20:20         ` Nicholas A. Bellinger
@ 2011-02-09 20:28           ` James Bottomley
  2011-02-09 20:44             ` Nicholas A. Bellinger
  0 siblings, 1 reply; 62+ messages in thread
From: James Bottomley @ 2011-02-09 20:28 UTC (permalink / raw)
  To: Nicholas A. Bellinger
  Cc: Linus Torvalds, Randy Dunlap, Joel Becker, scsi,
	Linux Kernel Mailing List

On Wed, 2011-02-09 at 12:20 -0800, Nicholas A. Bellinger wrote:
> On Wed, 2011-02-09 at 14:13 -0600, James Bottomley wrote:
> > Firstly, could we get the serious bug fixes identified and separated
> > from the general enhancement updates, so they can go in a fixes tree
> > without depending on enhancements?  The former category would include
> > the /proc interface removal, since we don't want the legacy interface to
> > be in a released kernel.
> > 
> 
> Everything in those two series should be considered bug fixes and
> immediate for-38 mainline material.

Things like this:

target: remove EXTRA_CFLAGS
target: Remove unnecessary container_of() pointer check
target: Remove unnecessary se_clear_dev_ports legacy code
target: Remove spurious double cast from structure macro accessors
target: Convert TMR REQ/RSP definitions to target namespace
target: Minor sparse warning fixes and annotations
target: Remove unneeded test of se_cmd

Are not serious bug fixes.  I could go either way on some of the error path changes.

James



^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Linux 2.6.38-rc4 (target_core: rmmod GP fault)
  2011-02-09 20:28           ` James Bottomley
@ 2011-02-09 20:44             ` Nicholas A. Bellinger
  0 siblings, 0 replies; 62+ messages in thread
From: Nicholas A. Bellinger @ 2011-02-09 20:44 UTC (permalink / raw)
  To: James Bottomley
  Cc: Linus Torvalds, Randy Dunlap, Joel Becker, scsi,
	Linux Kernel Mailing List, Christoph Hellwig

On Wed, 2011-02-09 at 14:28 -0600, James Bottomley wrote:
> On Wed, 2011-02-09 at 12:20 -0800, Nicholas A. Bellinger wrote:
> > On Wed, 2011-02-09 at 14:13 -0600, James Bottomley wrote:
> > > Firstly, could we get the serious bug fixes identified and separated
> > > from the general enhancement updates, so they can go in a fixes tree
> > > without depending on enhancements?  The former category would include
> > > the /proc interface removal, since we don't want the legacy interface to
> > > be in a released kernel.
> > > 
> > 
> > Everything in those two series should be considered bug fixes and
> > immediate for-38 mainline material.
> 
> Things like this:
> 
> target: remove EXTRA_CFLAGS
> target: Remove unnecessary container_of() pointer check
> target: Remove unnecessary se_clear_dev_ports legacy code
> target: Remove spurious double cast from structure macro accessors
> target: Convert TMR REQ/RSP definitions to target namespace

This is an important one, as using w/o TMR_* prefixed definitions for
task management response/response defs, we run into problems with
existing include/scsi/scsi.h message codes.

> target: Minor sparse warning fixes and annotations
> target: Remove unneeded test of se_cmd
> 
> Are not serious bug fixes.  I could go either way on some of the error path changes.
> 

Yes, these others are minor items that have been submitted by people
(hch, roland, jesper, danc) who have been reviewing target code since it
was merged for .38-rc1.

Considering how minor these are I would prefer to have these merged,
than deferring for-39.  If not, then I will need to respin tree w/o
their cleanups if what you prefer to be sent to Linus for-38, there are
3 other bugfix patches in the upstream LIO tree that I have been saving
for-38-rc5 since for-38-rc4 was cut(considering the two outstanding
series).  I would like to have these included as well.

Do you want me to send them all to the linux-scsi list again...?

--nab

  



> James
> 
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html


^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Linux 2.6.38-rc4 (hysdn: BUG)
  2011-02-09 19:44   ` Linus Torvalds
@ 2011-02-09 21:25     ` Randy Dunlap
  2011-02-09 21:57       ` David Miller
  0 siblings, 1 reply; 62+ messages in thread
From: Randy Dunlap @ 2011-02-09 21:25 UTC (permalink / raw)
  To: Linus Torvalds; +Cc: netdev, Linux Kernel Mailing List, Karsten Keil

On Wed, 9 Feb 2011 11:44:00 -0800 Linus Torvalds wrote:

> On Wed, Feb 9, 2011 at 9:24 AM, Randy Dunlap <randy.dunlap@oracle.com> wrote:
> >
> > on x86_64.  no HYSDN hardware found (correct).
> > Nearly allmodconfig.
> >
> >
> > [   65.397577] HYSDN: module Rev: 1.6.6.6 loaded
> > [   65.397584] HYSDN: network interface Rev: 1.8.6.4
> > [   65.398057] HYSDN: 0 card(s) found.
> > [   65.398121] BUG: unable to handle kernel paging request at ffffffffa06c99f0
> > [   65.398269] IP: [<ffffffffa06c68ba>] hysdn_getrev+0x2e/0x50 [hysdn]
> > [   65.398379] PGD 1a14067 PUD 1a18063 PMD 6f6c1067 PTE 800000006ce8c161
> > [   65.398613] Oops: 0003 [#1] SMP DEBUG_PAGEALLOC
> > [   65.400030]
> > [   65.400030] Pid: 2497, comm: modprobe Not tainted 2.6.38-rc4 #1 0TY565/OptiPlex 745
> > [   65.400030] RIP: 0010:[<ffffffffa06c68ba>]  [<ffffffffa06c68ba>] hysdn_getrev+0x2e/0x50 [hysdn]
> > [   65.400030] RSP: 0018:ffff88006eec1e68  EFLAGS: 00010206
> > [   65.400030] RAX: ffffffffa06c99f1 RBX: ffffffffa06c99e9 RCX: ffff88007c4159a0
> 
> The instruction sequence decodes to
> 
>   1e:	be 24 00 00 00       	mov    $0x24,%esi
>   23:	48 89 df             	mov    %rbx,%rdi
>   26:	e8 5b 39 c0 e0       	callq  0xffffffffe0c03986
>   2b:*	c6 40 ff 00          	movb   $0x0,-0x1(%rax)     <-- trapping instruction
> 
> which seems to be this
> 
>                 p = strchr(rev, '$');
>                 *--p = 0;
> 
> code. And yes, it's total crap, because while "p" and "rev" are "char
> *", the string that is passed in is actually of type "const char *",
> so that function is seriously broken. It's also seriously broken to
> not test that "p" is non-NULL - the function would just break if there
> is a colon in the string but not a '$'.
> 
> And hysdn_procconf_init() passes in a constant string to the thing:
> 
>     static char *hysdn_procconf_revision = "$Revision: 1.8.6.4 $";
> 
> What happens is that it breaks when we mark the constant section as
> read-only, because you have CONFIG_DEBUG_RODATA enabled.
> 
> So the fix seems to be to
>  - fix the prototype for hysdn_getrev() to not have "const".
>  - fix hysdn_procconf_init() to not pass in a constant string to it
> 
> The minimal patch would appear to be something like the appended. UNTESTED!

for your patch:

Tested-and-acked-by: Randy Dunlap <randy.dunlap@oracle.com>

> Btw, all of this code seems to go back to before the git history even
> started, so it doesn't seem to be new. I assume you haven't tried
> booting these all-module kernels before? Or is it just the
> DEBUG_RODATA thing that is new for you?

Neither is new.  I tested and reported many-modules on 2.6.37-rc1 and
reported these 2 bugs:

https://bugzilla.kernel.org/show_bug.cgi?id=22912
https://bugzilla.kernel.org/show_bug.cgi?id=22882

and that was with CONFIG_DEBUG_RODATA=y.
I don't know how hysdn was missed at that time.

---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Linux 2.6.38-rc4 (hysdn: BUG)
  2011-02-09 21:25     ` Randy Dunlap
@ 2011-02-09 21:57       ` David Miller
  2011-02-09 22:00         ` Linus Torvalds
  0 siblings, 1 reply; 62+ messages in thread
From: David Miller @ 2011-02-09 21:57 UTC (permalink / raw)
  To: randy.dunlap; +Cc: torvalds, netdev, linux-kernel, isdn

From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Wed, 9 Feb 2011 13:25:29 -0800

> On Wed, 9 Feb 2011 11:44:00 -0800 Linus Torvalds wrote:
> 
>> On Wed, Feb 9, 2011 at 9:24 AM, Randy Dunlap <randy.dunlap@oracle.com> wrote:
>> >
>> > on x86_64.  no HYSDN hardware found (correct).
>> > Nearly allmodconfig.
>> >
>> >
>> > [   65.397577] HYSDN: module Rev: 1.6.6.6 loaded
>> > [   65.397584] HYSDN: network interface Rev: 1.8.6.4
>> > [   65.398057] HYSDN: 0 card(s) found.
>> > [   65.398121] BUG: unable to handle kernel paging request at ffffffffa06c99f0
>> > [   65.398269] IP: [<ffffffffa06c68ba>] hysdn_getrev+0x2e/0x50 [hysdn]
>> > [   65.398379] PGD 1a14067 PUD 1a18063 PMD 6f6c1067 PTE 800000006ce8c161
>> > [   65.398613] Oops: 0003 [#1] SMP DEBUG_PAGEALLOC
>> > [   65.400030]
>> > [   65.400030] Pid: 2497, comm: modprobe Not tainted 2.6.38-rc4 #1 0TY565/OptiPlex 745
>> > [   65.400030] RIP: 0010:[<ffffffffa06c68ba>]  [<ffffffffa06c68ba>] hysdn_getrev+0x2e/0x50 [hysdn]
>> > [   65.400030] RSP: 0018:ffff88006eec1e68  EFLAGS: 00010206
>> > [   65.400030] RAX: ffffffffa06c99f1 RBX: ffffffffa06c99e9 RCX: ffff88007c4159a0
>> 
>> The instruction sequence decodes to
>> 
>>   1e:	be 24 00 00 00       	mov    $0x24,%esi
>>   23:	48 89 df             	mov    %rbx,%rdi
>>   26:	e8 5b 39 c0 e0       	callq  0xffffffffe0c03986
>>   2b:*	c6 40 ff 00          	movb   $0x0,-0x1(%rax)     <-- trapping instruction
>> 
>> which seems to be this
>> 
>>                 p = strchr(rev, '$');
>>                 *--p = 0;
>> 
>> code. And yes, it's total crap, because while "p" and "rev" are "char
>> *", the string that is passed in is actually of type "const char *",
>> so that function is seriously broken. It's also seriously broken to
>> not test that "p" is non-NULL - the function would just break if there
>> is a colon in the string but not a '$'.
>> 
>> And hysdn_procconf_init() passes in a constant string to the thing:
>> 
>>     static char *hysdn_procconf_revision = "$Revision: 1.8.6.4 $";
>> 
>> What happens is that it breaks when we mark the constant section as
>> read-only, because you have CONFIG_DEBUG_RODATA enabled.
>> 
>> So the fix seems to be to
>>  - fix the prototype for hysdn_getrev() to not have "const".
>>  - fix hysdn_procconf_init() to not pass in a constant string to it
>> 
>> The minimal patch would appear to be something like the appended. UNTESTED!
> 
> for your patch:
> 
> Tested-and-acked-by: Randy Dunlap <randy.dunlap@oracle.com>

This stuff just prints out a CVS revision string that hasn't changed
in 10 years into the kernel log.

I propose we just kill this stuff off completely.

I note that there is code in other places of this driver that copy
the read-only revision string into a local string buffer then pass
it into the hysdn_getrev() function, it just doesn't happen in this
one spot.

Anyways, I think I'll fix this like so:

--------------------
isdn: hysdn: Kill (partially buggy) CVS regision log reporting.

Some cases try to modify const strings, and in any event the
CVS revision strings have not changed in over ten years making
these printouts completely worthless.

Just kill all of this stuff off.

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/isdn/hysdn/hysdn_defs.h     |    2 --
 drivers/isdn/hysdn/hysdn_init.c     |   26 +-------------------------
 drivers/isdn/hysdn/hysdn_net.c      |    3 ---
 drivers/isdn/hysdn/hysdn_procconf.c |    3 +--
 4 files changed, 2 insertions(+), 32 deletions(-)

diff --git a/drivers/isdn/hysdn/hysdn_defs.h b/drivers/isdn/hysdn/hysdn_defs.h
index 729df40..18b801a 100644
--- a/drivers/isdn/hysdn/hysdn_defs.h
+++ b/drivers/isdn/hysdn/hysdn_defs.h
@@ -227,7 +227,6 @@ extern hysdn_card *card_root;	/* pointer to first card */
 /*************************/
 /* im/exported functions */
 /*************************/
-extern char *hysdn_getrev(const char *);
 
 /* hysdn_procconf.c */
 extern int hysdn_procconf_init(void);	/* init proc config filesys */
@@ -259,7 +258,6 @@ extern int hysdn_tx_cfgline(hysdn_card *, unsigned char *,
 
 /* hysdn_net.c */
 extern unsigned int hynet_enable; 
-extern char *hysdn_net_revision;
 extern int hysdn_net_create(hysdn_card *);	/* create a new net device */
 extern int hysdn_net_release(hysdn_card *);	/* delete the device */
 extern char *hysdn_net_getname(hysdn_card *);	/* get name of net interface */
diff --git a/drivers/isdn/hysdn/hysdn_init.c b/drivers/isdn/hysdn/hysdn_init.c
index b7cc5c2..0ab42ac 100644
--- a/drivers/isdn/hysdn/hysdn_init.c
+++ b/drivers/isdn/hysdn/hysdn_init.c
@@ -36,7 +36,6 @@ MODULE_DESCRIPTION("ISDN4Linux: Driver for HYSDN cards");
 MODULE_AUTHOR("Werner Cornelius");
 MODULE_LICENSE("GPL");
 
-static char *hysdn_init_revision = "$Revision: 1.6.6.6 $";
 static int cardmax;		/* number of found cards */
 hysdn_card *card_root = NULL;	/* pointer to first card */
 static hysdn_card *card_last = NULL;	/* pointer to first card */
@@ -49,25 +48,6 @@ static hysdn_card *card_last = NULL;	/* pointer to first card */
 /* Additionally newer versions may be activated without rebooting.          */
 /****************************************************************************/
 
-/******************************************************/
-/* extract revision number from string for log output */
-/******************************************************/
-char *
-hysdn_getrev(const char *revision)
-{
-	char *rev;
-	char *p;
-
-	if ((p = strchr(revision, ':'))) {
-		rev = p + 2;
-		p = strchr(rev, '$');
-		*--p = 0;
-	} else
-		rev = "???";
-	return rev;
-}
-
-
 /****************************************************************************/
 /* init_module is called once when the module is loaded to do all necessary */
 /* things like autodetect...                                                */
@@ -175,13 +155,9 @@ static int hysdn_have_procfs;
 static int __init
 hysdn_init(void)
 {
-	char tmp[50];
 	int rc;
 
-	strcpy(tmp, hysdn_init_revision);
-	printk(KERN_NOTICE "HYSDN: module Rev: %s loaded\n", hysdn_getrev(tmp));
-	strcpy(tmp, hysdn_net_revision);
-	printk(KERN_NOTICE "HYSDN: network interface Rev: %s \n", hysdn_getrev(tmp));
+	printk(KERN_NOTICE "HYSDN: module loaded\n");
 
 	rc = pci_register_driver(&hysdn_pci_driver);
 	if (rc)
diff --git a/drivers/isdn/hysdn/hysdn_net.c b/drivers/isdn/hysdn/hysdn_net.c
index feec8d8..11f2cce 100644
--- a/drivers/isdn/hysdn/hysdn_net.c
+++ b/drivers/isdn/hysdn/hysdn_net.c
@@ -26,9 +26,6 @@
 unsigned int hynet_enable = 0xffffffff; 
 module_param(hynet_enable, uint, 0);
 
-/* store the actual version for log reporting */
-char *hysdn_net_revision = "$Revision: 1.8.6.4 $";
-
 #define MAX_SKB_BUFFERS 20	/* number of buffers for keeping TX-data */
 
 /****************************************************************************/
diff --git a/drivers/isdn/hysdn/hysdn_procconf.c b/drivers/isdn/hysdn/hysdn_procconf.c
index 96b3e39..5fe83bd 100644
--- a/drivers/isdn/hysdn/hysdn_procconf.c
+++ b/drivers/isdn/hysdn/hysdn_procconf.c
@@ -23,7 +23,6 @@
 #include "hysdn_defs.h"
 
 static DEFINE_MUTEX(hysdn_conf_mutex);
-static char *hysdn_procconf_revision = "$Revision: 1.8.6.4 $";
 
 #define INFO_OUT_LEN 80		/* length of info line including lf */
 
@@ -404,7 +403,7 @@ hysdn_procconf_init(void)
 		card = card->next;	/* next entry */
 	}
 
-	printk(KERN_NOTICE "HYSDN: procfs Rev. %s initialised\n", hysdn_getrev(hysdn_procconf_revision));
+	printk(KERN_NOTICE "HYSDN: procfs initialised\n");
 	return (0);
 }				/* hysdn_procconf_init */
 
-- 
1.7.4


^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Linux 2.6.38-rc4 (hysdn: BUG)
  2011-02-09 21:57       ` David Miller
@ 2011-02-09 22:00         ` Linus Torvalds
  0 siblings, 0 replies; 62+ messages in thread
From: Linus Torvalds @ 2011-02-09 22:00 UTC (permalink / raw)
  To: David Miller; +Cc: randy.dunlap, netdev, linux-kernel, isdn

On Wed, Feb 9, 2011 at 1:57 PM, David Miller <davem@davemloft.net> wrote:
>
> I propose we just kill this stuff off completely.
>
> I note that there is code in other places of this driver that copy
> the read-only revision string into a local string buffer then pass
> it into the hysdn_getrev() function, it just doesn't happen in this
> one spot.
>
> Anyways, I think I'll fix this like so:

Ack from me. Removing terminally buggy and pointless code is certainly
better than trying to fix it up. No amount of lipstick will make that
pig look good.

                      Linus

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Linux 2.6.38-rc4 (other bugs)
  2011-02-09 17:36 ` Linux 2.6.38-rc4 (other bugs) Randy Dunlap
@ 2011-02-09 22:01   ` David Miller
  2011-02-09 22:16     ` Randy Dunlap
  2011-02-10  4:58     ` Linux 2.6.38-rc4 (other bugs: x25) Randy Dunlap
  2011-02-10 19:34   ` Linux 2.6.38-rc4 (other bugs: ipmi Oops) Randy Dunlap
  1 sibling, 2 replies; 62+ messages in thread
From: David Miller @ 2011-02-09 22:01 UTC (permalink / raw)
  To: randy.dunlap; +Cc: torvalds, linux-kernel

From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Wed, 9 Feb 2011 09:36:56 -0800

> 
> There are also bugs or other oopses etc. with ipmi, x25 (rmmod hangs system),
> and (usb gadget) g_audio, but I don't have logs for them yet...
> Someone else could do those.

Randy if you could simply get a CPU program counter when the x25
rmmod hang happens, I can probably fix it quickly.

But if you don't have time I can fiddle around with it myself.

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Linux 2.6.38-rc4 (other bugs)
  2011-02-09 22:01   ` David Miller
@ 2011-02-09 22:16     ` Randy Dunlap
  2011-02-10  4:58     ` Linux 2.6.38-rc4 (other bugs: x25) Randy Dunlap
  1 sibling, 0 replies; 62+ messages in thread
From: Randy Dunlap @ 2011-02-09 22:16 UTC (permalink / raw)
  To: David Miller; +Cc: torvalds, linux-kernel

On Wed, 09 Feb 2011 14:01:15 -0800 (PST) David Miller wrote:

> From: Randy Dunlap <randy.dunlap@oracle.com>
> Date: Wed, 9 Feb 2011 09:36:56 -0800
> 
> > 
> > There are also bugs or other oopses etc. with ipmi, x25 (rmmod hangs system),
> > and (usb gadget) g_audio, but I don't have logs for them yet...
> > Someone else could do those.
> 
> Randy if you could simply get a CPU program counter when the x25
> rmmod hang happens, I can probably fix it quickly.
> 
> But if you don't have time I can fiddle around with it myself.

I can probably get it this (WED.) evening.

---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Linux 2.6.38-rc4 (other bugs: x25)
  2011-02-09 22:01   ` David Miller
  2011-02-09 22:16     ` Randy Dunlap
@ 2011-02-10  4:58     ` Randy Dunlap
  2011-02-10  5:48       ` David Miller
  1 sibling, 1 reply; 62+ messages in thread
From: Randy Dunlap @ 2011-02-10  4:58 UTC (permalink / raw)
  To: David Miller; +Cc: torvalds, linux-kernel

On Wed, 09 Feb 2011 14:01:15 -0800 (PST) David Miller wrote:

> From: Randy Dunlap <randy.dunlap@oracle.com>
> Date: Wed, 9 Feb 2011 09:36:56 -0800
> 
> > 
> > There are also bugs or other oopses etc. with ipmi, x25 (rmmod hangs system),
> > and (usb gadget) g_audio, but I don't have logs for them yet...
> > Someone else could do those.
> 
> Randy if you could simply get a CPU program counter when the x25
> rmmod hang happens, I can probably fix it quickly.
> 
> But if you don't have time I can fiddle around with it myself.
> --

Hi Dave,

Here's what I captured before the system hung and the beeper stayed
on constantly.  ;)


[  300.488956] calling  x25_init+0x0/0x106 [x25] @ 2571
[  300.494055] NET: Registered protocol family 9
[  300.498609] X.25 for Linux Version 0.2
[  300.503565] initcall x25_init+0x0/0x106 [x25] returned 0 after 9284 usecs
[  303.931229] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC
[  303.934923] last sysfs file: /sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1.3/devnum
[  303.934923] CPU 1 
[  303.934923] Modules linked in: x25(-) af_packet nfsd lockd nfs_acl auth_rpcgss exportfs sunrpc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables x_tables ipv6 cpufreq_ondemand acpi_cpufreq freq_table mperf binfmt_misc dm_mirror dm_region_hash dm_log dm_multipath scsi_dh dm_mod joydev mousedev evdev mac_hid snd_hda_codec_analog snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device usbmouse usbkbd usbhid snd_pcm hid snd_timer sr_mod tg3 pcspkr rtc_cmos dcdbas sg snd iTCO_wdt cdrom i2c_i801 rtc_core processor iTCO_vendor_support rtc_lib 8250_pnp soundcore thermal_sys intel_agp button intel_gtt snd_page_alloc hwmon unix ide_pci_generic ide_core ata_generic pata_acpi ata_piix sd_mod crc_t10dif ext3 jbd mbcache uhci_hcd ohci_hcd ssb mmc_core pcmcia pcmcia_core firmware_class ehci_hcd usbcore nls_base [last unloaded: microcode]
[  303.934923] 
[  303.934923] Pid: 2573, comm: rmmod Not tainted 2.6.38-rc4 #3 0TY565/OptiPlex 745                 
[  303.934923] RIP: 0010:[<ffffffffa069c131>]  [<ffffffffa069c131>] x25_link_free+0x41/0x81 [x25]
[  303.934923] RSP: 0018:ffff880061777eb8  EFLAGS: 00010202
[  303.934923] RAX: 6b6b6b6b6b6b6b6b RBX: ffffffffa06a03d0 RCX: 0010000000004040
[  303.934923] RDX: 00000000001c0016 RSI: ffff88005ecc6438 RDI: 0000000000000216
[  303.934923] RBP: ffff880061777ec8 R08: ffff88007f004c80 R09: 000000000000005a
[  303.934923] R10: ffffffff8182c266 R11: ffff880061777e18 R12: ffffffffa06a03d0
[  303.934923] R13: 00007fff94141220 R14: 0000000000000000 R15: 0000000000000001
[  303.934923] FS:  00007fc688ac36f0(0000) GS:ffff88007c600000(0000) knlGS:0000000000000000
[  303.934923] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  303.934923] CR2: 00000000008faf20 CR3: 000000006873c000 CR4: 00000000000006e0
[  303.934923] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  303.934923] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  303.934923] Process rmmod (pid: 2573, threadinfo ffff880061776000, task ffff88005cec3000)
[  303.934923] Stack:
[  303.934923]  ffffffffa06a0b10 0000000000000000 ffff880061777ed8 ffffffffa069c085
[  303.934923]  ffff880061777f78 ffffffff810d3e94 ffffffffa06a0b10 0000000000000880
[  303.934923]  ffff880061777f14 ffffffff8155da0e ffff880061777f28 0000000081136a5f
[  303.934923] Call Trace:
[  303.934923]  [<ffffffffa069c085>] x25_exit+0x21/0x8c [x25]
[  303.934923]  [<ffffffff810d3e94>] sys_delete_module+0x2d6/0x368
[  303.934923]  [<ffffffff8155da0e>] ? lockdep_sys_exit_thunk+0x35/0x67
[  303.934923]  [<ffffffff810fd3f2>] ? audit_syscall_entry+0x172/0x1a5
[  303.934923]  [<ffffffff8155d998>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[  303.934923]  [<ffffffff8100e942>] system_call_fastpath+0x16/0x1b
[  303.934923] Code: 56 6a 00 00 e8 6e 22 ec e0 48 8b 1d ba 42 00 00 4c 8b 23 eb 2e 48 89 df 48 ff 05 4b 6a 00 00 e8 62 d1 ff ff 48 8b 43 10 4c 89 e3 <48> 8b 80 80 04 00 00 65 ff 08 49 8b 04 24 48 ff 05 22 6a 00 00 
[  303.934923] RIP  [<ffffffffa069c131>] x25_link_free+0x41/0x81 [x25]
[  303.934923]  RSP <ffff880061777eb8>


HTH.
---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Linux 2.6.38-rc4 (other bugs: x25)
  2011-02-10  4:58     ` Linux 2.6.38-rc4 (other bugs: x25) Randy Dunlap
@ 2011-02-10  5:48       ` David Miller
  2011-02-10  6:29         ` Randy Dunlap
  0 siblings, 1 reply; 62+ messages in thread
From: David Miller @ 2011-02-10  5:48 UTC (permalink / raw)
  To: randy.dunlap; +Cc: torvalds, linux-kernel

From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Wed, 9 Feb 2011 20:58:42 -0800

> Here's what I captured before the system hung and the beeper stayed
> on constantly.  ;)

:-)

> [  303.931229] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC
> [  303.934923] last sysfs file: /sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1.3/devnum
> [  303.934923] CPU 1 
> [  303.934923] Modules linked in: x25(-) af_packet nfsd lockd nfs_acl auth_rpcgss exportfs sunrpc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables x_tables ipv6 cpufreq_ondemand acpi_cpufreq freq_table mperf binfmt_misc dm_mirror dm_region_hash dm_log dm_multipath scsi_dh dm_mod joydev mousedev evdev mac_hid snd_hda_codec_analog snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device usbmouse usbkbd usbhid snd_pcm hid snd_timer sr_mod tg3 pcspkr rtc_cmos dcdbas sg snd iTCO_wdt cdrom i2c_i801 rtc_core processor iTCO_vendor_support rtc_lib 8250_pnp soundcore thermal_sys intel_agp button intel_gtt snd_page_alloc hwmon unix ide_pci_generic ide_core ata_generic pata_acpi ata_piix sd_mod crc_t10dif ext3 jbd mbcache uhci_hcd ohci_hcd ssb mmc_core pcmcia pcmcia_core firmware_class ehci_hcd usbcore nls_base [last unloaded: microcode]
> [  303.934923] 
> [  303.934923] Pid: 2573, comm: rmmod Not tainted 2.6.38-rc4 #3 0TY565/OptiPlex 745                 
> [  303.934923] RIP: 0010:[<ffffffffa069c131>]  [<ffffffffa069c131>] x25_link_free+0x41/0x81 [x25]

Ok, a GPF in x25_link_free().

This code simply traverses the x25_neigh_list, unlinking and releasing
each entry it finds.

Every node entry which is added to this list is dynamically allocated
entry.  See x25_link_device_up(), which is the only place where a
list_add() is performed on the x25_neigh_list.

The device should be accessible and the dev_put() should not cause
trouble because we grabbed a reference to this device when
x25_link_device_up() added the new x25_neigh to the list.

I can't see anything here that should barf like this.

I also can't see anything "const" in the x25 protocol code that might
be trampled upon.

I'm assuming in all of this that it's a write to a read-only location
which is causing this GPF, via CONFIG_DEBUG_RODATA.

Playing around with config options and looking at the various x86_64 asm
in these different cases seems to suggest that it's indeed the dev_put()
that is causing the GPF.

Network devices use per-cpu refcounts.

We know that at some point in the past, the ref bump worked, because
we did a dev_hold() when we added the referencing x25_neigh entry to
the list.

For some reason now it fails.

RAX is where the per-cpu base pointer should be, and in your dump
that's:

[  303.934923] RAX: 6b6b6b6b6b6b6b6b RBX: ffffffffa06a03d0 RCX: 0010000000004040

Which is the SLAB free poison value.

So it seems like the network device at nb->dev has been freed for some
reason.

Weird....

Oh, the bug is obvious... 'nb' is freed right before we 'nb->dev', duh.

Please try this fix:

--------------------
x25: Do not reference freed memory.

In x25_link_free(), we destroy 'nb' before dereferencing
'nb->dev'.  Don't do this, because 'nb' might be freed
by then.

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/x25/x25_link.c |    5 ++++-
 1 files changed, 4 insertions(+), 1 deletions(-)

diff --git a/net/x25/x25_link.c b/net/x25/x25_link.c
index 4cbc942..2130692 100644
--- a/net/x25/x25_link.c
+++ b/net/x25/x25_link.c
@@ -396,9 +396,12 @@ void __exit x25_link_free(void)
 	write_lock_bh(&x25_neigh_list_lock);
 
 	list_for_each_safe(entry, tmp, &x25_neigh_list) {
+		struct net_device *dev;
+
 		nb = list_entry(entry, struct x25_neigh, node);
+		dev = nb->dev;
 		__x25_remove_neigh(nb);
-		dev_put(nb->dev);
+		dev_put(dev);
 	}
 	write_unlock_bh(&x25_neigh_list_lock);
 }
-- 
1.7.4


^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Linux 2.6.38-rc4 (other bugs: x25)
  2011-02-10  5:48       ` David Miller
@ 2011-02-10  6:29         ` Randy Dunlap
  2011-02-10  6:35           ` David Miller
  0 siblings, 1 reply; 62+ messages in thread
From: Randy Dunlap @ 2011-02-10  6:29 UTC (permalink / raw)
  To: David Miller; +Cc: torvalds, linux-kernel

On 02/09/11 21:48, David Miller wrote:
> From: Randy Dunlap <randy.dunlap@oracle.com>
> Date: Wed, 9 Feb 2011 20:58:42 -0800
> 
>> Here's what I captured before the system hung and the beeper stayed
>> on constantly.  ;)
> 
> :-)
> 
>> [  303.931229] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC
>> [  303.934923] last sysfs file: /sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1.3/devnum
>> [  303.934923] CPU 1 
>> [  303.934923] Modules linked in: x25(-) af_packet nfsd lockd nfs_acl auth_rpcgss exportfs sunrpc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables x_tables ipv6 cpufreq_ondemand acpi_cpufreq freq_table mperf binfmt_misc dm_mirror dm_region_hash dm_log dm_multipath scsi_dh dm_mod joydev mousedev evdev mac_hid snd_hda_codec_analog snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device usbmouse usbkbd usbhid snd_pcm hid snd_timer sr_mod tg3 pcspkr rtc_cmos dcdbas sg snd iTCO_wdt cdrom i2c_i801 rtc_core processor iTCO_vendor_support rtc_lib 8250_pnp soundcore thermal_sys intel_agp button intel_gtt snd_page_alloc hwmon unix ide_pci_generic ide_core ata_generic pata_acpi ata_piix sd_mod crc_t10dif ext3 jbd mbcache uhci_hcd ohci_hcd ssb mmc_core pcmcia pcmcia_core firmware_class ehci_hcd usbcore nls_base [last unloaded: microcode]
>> [  303.934923] 
>> [  303.934923] Pid: 2573, comm: rmmod Not tainted 2.6.38-rc4 #3 0TY565/OptiPlex 745                 
>> [  303.934923] RIP: 0010:[<ffffffffa069c131>]  [<ffffffffa069c131>] x25_link_free+0x41/0x81 [x25]
> 
> Ok, a GPF in x25_link_free().
> 
> This code simply traverses the x25_neigh_list, unlinking and releasing
> each entry it finds.
> 
> Every node entry which is added to this list is dynamically allocated
> entry.  See x25_link_device_up(), which is the only place where a
> list_add() is performed on the x25_neigh_list.
> 
> The device should be accessible and the dev_put() should not cause
> trouble because we grabbed a reference to this device when
> x25_link_device_up() added the new x25_neigh to the list.
> 
> I can't see anything here that should barf like this.
> 
> I also can't see anything "const" in the x25 protocol code that might
> be trampled upon.
> 
> I'm assuming in all of this that it's a write to a read-only location
> which is causing this GPF, via CONFIG_DEBUG_RODATA.
> 
> Playing around with config options and looking at the various x86_64 asm
> in these different cases seems to suggest that it's indeed the dev_put()
> that is causing the GPF.
> 
> Network devices use per-cpu refcounts.
> 
> We know that at some point in the past, the ref bump worked, because
> we did a dev_hold() when we added the referencing x25_neigh entry to
> the list.
> 
> For some reason now it fails.
> 
> RAX is where the per-cpu base pointer should be, and in your dump
> that's:
> 
> [  303.934923] RAX: 6b6b6b6b6b6b6b6b RBX: ffffffffa06a03d0 RCX: 0010000000004040
> 
> Which is the SLAB free poison value.
> 
> So it seems like the network device at nb->dev has been freed for some
> reason.
> 
> Weird....
> 
> Oh, the bug is obvious... 'nb' is freed right before we 'nb->dev', duh.
> 
> Please try this fix:

Yes, that survives 5 loads/rmmods.  Thanks.

Tested-and-acked-by: Randy Dunlap <randy.dunlap@oracle.com>


> --------------------
> x25: Do not reference freed memory.
> 
> In x25_link_free(), we destroy 'nb' before dereferencing
> 'nb->dev'.  Don't do this, because 'nb' might be freed
> by then.
> 
> Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
> Signed-off-by: David S. Miller <davem@davemloft.net>
> ---
>  net/x25/x25_link.c |    5 ++++-
>  1 files changed, 4 insertions(+), 1 deletions(-)
> 
> diff --git a/net/x25/x25_link.c b/net/x25/x25_link.c
> index 4cbc942..2130692 100644
> --- a/net/x25/x25_link.c
> +++ b/net/x25/x25_link.c
> @@ -396,9 +396,12 @@ void __exit x25_link_free(void)
>  	write_lock_bh(&x25_neigh_list_lock);
>  
>  	list_for_each_safe(entry, tmp, &x25_neigh_list) {
> +		struct net_device *dev;
> +
>  		nb = list_entry(entry, struct x25_neigh, node);
> +		dev = nb->dev;
>  		__x25_remove_neigh(nb);
> -		dev_put(nb->dev);
> +		dev_put(dev);
>  	}
>  	write_unlock_bh(&x25_neigh_list_lock);
>  }


-- 
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Linux 2.6.38-rc4 (other bugs: x25)
  2011-02-10  6:29         ` Randy Dunlap
@ 2011-02-10  6:35           ` David Miller
  0 siblings, 0 replies; 62+ messages in thread
From: David Miller @ 2011-02-10  6:35 UTC (permalink / raw)
  To: randy.dunlap; +Cc: torvalds, linux-kernel

From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Wed, 09 Feb 2011 22:29:50 -0800

> On 02/09/11 21:48, David Miller wrote:
>> Please try this fix:
> 
> Yes, that survives 5 loads/rmmods.  Thanks.
> 
> Tested-and-acked-by: Randy Dunlap <randy.dunlap@oracle.com>

Thanks a lot Randy!

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Linux 2.6.38-rc4 (other bugs: ipmi Oops)
  2011-02-09 17:36 ` Linux 2.6.38-rc4 (other bugs) Randy Dunlap
  2011-02-09 22:01   ` David Miller
@ 2011-02-10 19:34   ` Randy Dunlap
  2011-02-10 20:03     ` Linus Torvalds
  1 sibling, 1 reply; 62+ messages in thread
From: Randy Dunlap @ 2011-02-10 19:34 UTC (permalink / raw)
  To: lkml, Corey Minyard; +Cc: Linus Torvalds

On Wed, 9 Feb 2011 09:36:56 -0800 Randy Dunlap wrote:

> 
> There are also bugs or other oopses etc. with ipmi, x25 (rmmod hangs system),
> and (usb gadget) g_audio, but I don't have logs for them yet...
> Someone else could do those.
> 
> Oh, and ext4, which was reported on the ext4 mailing list.


Loading ipmi_si module a second time causes an Oops:


[   66.603456] calling  ipmi_init_msghandler_mod+0x0/0x1000 [ipmi_msghandler] @ 2443
[   66.611879] ipmi message handler version 39.2
[   66.617403] initcall ipmi_init_msghandler_mod+0x0/0x1000 [ipmi_msghandler] returned 0 after 5548 usecs
[   66.707849] calling  init_ipmi_si+0x0/0x4cd [ipmi_si] @ 2443
[   66.713933] IPMI System Interface driver.
[   66.718605] ipmi_si: Adding default-specified kcs state machine
[   66.724835] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[   66.735302] ipmi_si: Interface detection failed
[   66.762751] ipmi_si: Adding default-specified smic state machine
[   66.769292] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
[   66.779869] ipmi_si: Interface detection failed
[   66.800186] ipmi_si: Adding default-specified bt state machine
[   66.806567] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
[   66.816866] ipmi_si: Interface detection failed
[   66.836603] ipmi_si: Unable to find any System Interface(s)
[   66.842704] initcall init_ipmi_si+0x0/0x4cd [ipmi_si] returned -19 after 125889 usecs
[   68.105422] calling  init_ipmi_si+0x0/0x4cd [ipmi_si] @ 2453
[   68.111878] IPMI System Interface driver.
[   68.116576] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
[   68.120143] last sysfs file: /sys/module/ipmi_msghandler/initstate
[   68.120143] CPU 0 
[   68.120143] Modules linked in: ipmi_si(+) ipmi_msghandler af_packet nfsd lockd nfs_acl auth_rpcgss exportfs sunrpc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables x_tables ipv6 cpufreq_ondemand acpi_cpufreq freq_table mperf binfmt_misc dm_mirror dm_region_hash dm_log dm_multipath scsi_dh dm_mod snd_hda_codec_analog joydev mousedev evdev mac_hid snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device usbmouse snd_pcm usbkbd usbhid snd_timer hid snd sr_mod tg3 dcdbas cdrom pcspkr rtc_cmos i2c_i801 soundcore sg iTCO_wdt rtc_core processor snd_page_alloc iTCO_vendor_support intel_agp rtc_lib thermal_sys 8250_pnp intel_gtt button hwmon unix ide_pci_generic ide_core ata_generic pata_acpi ata_piix sd_mod crc_t10dif ext3 jbd mbcache uhci_hcd ohci_hcd ssb mmc_core pcmcia pcmcia_core firmware_class ehci_hcd usbcore nls_base [last unloaded: microcode]
[   68.120143] 
[   68.120143] Pid: 2453, comm: modprobe Not tainted 2.6.38-rc4 #4 0TY565/OptiPlex 745                 
[   68.120143] RIP: 0010:[<ffffffff813fc579>]  [<ffffffff813fc579>] put_driver+0x10/0x22
[   68.120143] RSP: 0018:ffff88005ee8be98  EFLAGS: 00010202
[   68.120143] RAX: ffffffffa06a8430 RBX: ffffffffa06bd430 RCX: ffff88007c4187b0
[   68.120143] RDX: 00000000000b000a RSI: 0000000fdc10217c RDI: ffffffffa06a8430
[   68.120143] RBP: ffff88005ee8be98 R08: 0000000000000000 R09: 0000000000000000
[   68.120143] R10: ffffffff812be7f7 R11: ffff88005ee8bcd8 R12: ffffffffa06b86e9
[   68.120143] R13: 0000000000000000 R14: 0000000fdbc6e8dc R15: 0000000000000000
[   68.120143] FS:  00007fd2014156f0(0000) GS:ffff88007c400000(0000) knlGS:0000000000000000
[   68.120143] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   68.120143] CR2: ffffffffa06a8490 CR3: 000000005cec7000 CR4: 00000000000006f0
[   68.120143] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   68.120143] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[   68.120143] Process modprobe (pid: 2453, threadinfo ffff88005ee8a000, task ffff8800606ab000)
[   68.120143] Stack:
[   68.120143]  ffff88005ee8bec8 ffffffff813fc64b 0000000000000000 ffffffffa06b86e9
[   68.340115]  0000000000000000 0000000fdbc6e8dc ffff88005ee8bed8 ffffffff8137f5de
[   68.340115]  ffff88005ee8bf18 ffffffffa06b888d ffff88005ee8bf18 ffffffff810b5cee
[   68.340115] Call Trace:
[   68.340115]  [<ffffffff813fc64b>] driver_register+0xc0/0x1b2
[   68.340115]  [<ffffffffa06b86e9>] ? init_ipmi_si+0x0/0x4cd [ipmi_si]
[   68.340115]  [<ffffffff8137f5de>] pnp_register_driver+0x28/0x31
[   68.340115]  [<ffffffffa06b888d>] init_ipmi_si+0x1a4/0x4cd [ipmi_si]
[   68.340115]  [<ffffffff810b5cee>] ? ktime_get+0x88/0xde
[   68.340115]  [<ffffffffa06b86e9>] ? init_ipmi_si+0x0/0x4cd [ipmi_si]
[   68.340115]  [<ffffffff810020a6>] do_one_initcall+0x6c/0x1e3
[   68.340115]  [<ffffffff810d4998>] sys_init_module+0x12b/0x307
[   68.340115]  [<ffffffff8100e902>] system_call_fastpath+0x16/0x1b
[   68.340115] Code: 85 f6 75 d9 48 89 df e8 6f de ff ff 48 ff 05 d7 af 80 01 58 5b 41 5c 41 5d c9 c3 55 48 89 e5 0f 1f 44 00 00 48 ff 05 c7 af 80 01 <48> 8b 7f 60 e8 38 27 ec ff 48 ff 05 bf af 80 01 c9 c3 55 48 89 
[   68.340115] RIP  [<ffffffff813fc579>] put_driver+0x10/0x22
[   68.340115]  RSP <ffff88005ee8be98>
[   68.340115] CR2: ffffffffa06a8490
[   68.340115] ---[ end trace 0c99b6dc9c0e95a3 ]---


This is on x86_64, almost allmodconfig.

---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Linux 2.6.38-rc4 (other bugs: ipmi Oops)
  2011-02-10 19:34   ` Linux 2.6.38-rc4 (other bugs: ipmi Oops) Randy Dunlap
@ 2011-02-10 20:03     ` Linus Torvalds
  2011-02-10 20:08       ` Corey Minyard
  2011-02-10 21:41       ` Randy Dunlap
  0 siblings, 2 replies; 62+ messages in thread
From: Linus Torvalds @ 2011-02-10 20:03 UTC (permalink / raw)
  To: Randy Dunlap; +Cc: lkml, Corey Minyard, Bjorn Helgaas

[-- Attachment #1: Type: text/plain, Size: 2169 bytes --]

On Thu, Feb 10, 2011 at 11:34 AM, Randy Dunlap <randy.dunlap@oracle.com> wrote:
>
> Loading ipmi_si module a second time causes an Oops:
>
> [   68.120143] RIP: 0010:[<ffffffff813fc579>]  [<ffffffff813fc579>] put_driver+0x10/0x22

The disassembly is

  	55                   	push   %rbp
  	48 89 e5             	mov    %rsp,%rbp
  	0f 1f 44 00 00       	nopl   0x0(%rax,%rax,1)
  	48 ff 05 c7 af 80 01 	incq   0x180afc7(%rip)        # 0x180aff2
  *	48 8b 7f 60          	mov    0x60(%rdi),%rdi     <-- trapping instruction
  	e8 38 27 ec ff       	callq  0xffffffffffec276c
  	48 ff 05 bf af 80 01 	incq   0x180afbf(%rip)        # 0x180affa
  	c9                   	leaveq
  	c3                   	retq

which is the access of "drv->p" in that function:

   kobject_put(&drv->p->kobj);

so "drv" that was passed in was just bogus. (it's
"0xffffffffa06a8430", looks like it's the DEBUG_PAGEALLOC that has
caused the page to be free'd).

> [   68.340115] Call Trace:
> [   68.340115]  [<ffffffff813fc64b>] driver_register+0xc0/0x1b2
> [   68.340115]  [<ffffffff8137f5de>] pnp_register_driver+0x28/0x31
> [   68.340115]  [<ffffffffa06b888d>] init_ipmi_si+0x1a4/0x4cd [ipmi_si]
> [   68.340115]  [<ffffffff810020a6>] do_one_initcall+0x6c/0x1e3
> [   68.340115]  [<ffffffff810d4998>] sys_init_module+0x12b/0x307

And I think that - as usual - the problem is that the damn driver
cleanup is very ugly, and has this duplicate set of code to unregister
all the random crap. Except one of the duplicates is missing one case.
I think the bug was introduced by Gjorn Helgaas in commit 9e368fa011d4
("ipmi: add PNP discovery (ACPI namespace via PNPACPI)") which added
the acpi pnp case, but only unregistered it on the regular module exit
path, not on the "module loaded with no pnp devices" path.

Does this patch fix it? And Corey - this is a good example of why the
code shouldn't duplicate the "unregister stuff" in the module load
error case vs the module exit path, and there should be a shared
"cleanup()" function that is called by both. Can this be cleaned up,
please?

PATCH IS UNTESTED!

                         Linus

[-- Attachment #2: patch.diff --]
[-- Type: text/x-patch, Size: 567 bytes --]

 drivers/char/ipmi/ipmi_si_intf.c |    4 ++++
 1 files changed, 4 insertions(+), 0 deletions(-)

diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index b6ae6e9..5953825 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -3454,6 +3454,10 @@ static int __devinit init_ipmi_si(void)
 		if (pci_registered)
 			pci_unregister_driver(&ipmi_pci_driver);
 #endif
+#ifdef CONFIG_ACPI
+		if (pnp_registered)
+			pnp_unregister_driver(&ipmi_pnp_driver);
+#endif
 
 #ifdef CONFIG_PPC_OF
 		if (of_registered)

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Linux 2.6.38-rc4 (other bugs: ipmi Oops)
  2011-02-10 20:03     ` Linus Torvalds
@ 2011-02-10 20:08       ` Corey Minyard
  2011-02-10 21:41       ` Randy Dunlap
  1 sibling, 0 replies; 62+ messages in thread
From: Corey Minyard @ 2011-02-10 20:08 UTC (permalink / raw)
  To: Linus Torvalds; +Cc: Randy Dunlap, lkml, Bjorn Helgaas, Peter Huewe

On 02/10/2011 02:03 PM, Linus Torvalds wrote:
> On Thu, Feb 10, 2011 at 11:34 AM, Randy Dunlap<randy.dunlap@oracle.com>  wrote:
>> Loading ipmi_si module a second time causes an Oops:
>>
>> [   68.120143] RIP: 0010:[<ffffffff813fc579>]  [<ffffffff813fc579>] put_driver+0x10/0x22
> The disassembly is
>
>    	55                   	push   %rbp
>    	48 89 e5             	mov    %rsp,%rbp
>    	0f 1f 44 00 00       	nopl   0x0(%rax,%rax,1)
>    	48 ff 05 c7 af 80 01 	incq   0x180afc7(%rip)        # 0x180aff2
>    *	48 8b 7f 60          	mov    0x60(%rdi),%rdi<-- trapping instruction
>    	e8 38 27 ec ff       	callq  0xffffffffffec276c
>    	48 ff 05 bf af 80 01 	incq   0x180afbf(%rip)        # 0x180affa
>    	c9                   	leaveq
>    	c3                   	retq
>
> which is the access of "drv->p" in that function:
>
>     kobject_put(&drv->p->kobj);
>
> so "drv" that was passed in was just bogus. (it's
> "0xffffffffa06a8430", looks like it's the DEBUG_PAGEALLOC that has
> caused the page to be free'd).
>
>> [   68.340115] Call Trace:
>> [   68.340115]  [<ffffffff813fc64b>] driver_register+0xc0/0x1b2
>> [   68.340115]  [<ffffffff8137f5de>] pnp_register_driver+0x28/0x31
>> [   68.340115]  [<ffffffffa06b888d>] init_ipmi_si+0x1a4/0x4cd [ipmi_si]
>> [   68.340115]  [<ffffffff810020a6>] do_one_initcall+0x6c/0x1e3
>> [   68.340115]  [<ffffffff810d4998>] sys_init_module+0x12b/0x307
> And I think that - as usual - the problem is that the damn driver
> cleanup is very ugly, and has this duplicate set of code to unregister
> all the random crap. Except one of the duplicates is missing one case.
> I think the bug was introduced by Gjorn Helgaas in commit 9e368fa011d4
> ("ipmi: add PNP discovery (ACPI namespace via PNPACPI)") which added
> the acpi pnp case, but only unregistered it on the regular module exit
> path, not on the "module loaded with no pnp devices" path.
Yes, I already have a patch (that was neglected) from Peter Huewe to fix 
this problem.  I'll send it today once I finish testing it.

> Does this patch fix it? And Corey - this is a good example of why the
> code shouldn't duplicate the "unregister stuff" in the module load
> error case vs the module exit path, and there should be a shared
> "cleanup()" function that is called by both. Can this be cleaned up,
> please?
I will work on that.

-corey

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Linux 2.6.38-rc4 (other bugs: ipmi Oops)
  2011-02-10 20:03     ` Linus Torvalds
  2011-02-10 20:08       ` Corey Minyard
@ 2011-02-10 21:41       ` Randy Dunlap
  1 sibling, 0 replies; 62+ messages in thread
From: Randy Dunlap @ 2011-02-10 21:41 UTC (permalink / raw)
  To: Linus Torvalds; +Cc: lkml, Corey Minyard, Bjorn Helgaas

On 02/10/11 12:03, Linus Torvalds wrote:
> On Thu, Feb 10, 2011 at 11:34 AM, Randy Dunlap <randy.dunlap@oracle.com> wrote:
>>
>> Loading ipmi_si module a second time causes an Oops:
>>
>> [   68.120143] RIP: 0010:[<ffffffff813fc579>]  [<ffffffff813fc579>] put_driver+0x10/0x22
> 
> The disassembly is
> 
>   	55                   	push   %rbp
>   	48 89 e5             	mov    %rsp,%rbp
>   	0f 1f 44 00 00       	nopl   0x0(%rax,%rax,1)
>   	48 ff 05 c7 af 80 01 	incq   0x180afc7(%rip)        # 0x180aff2
>   *	48 8b 7f 60          	mov    0x60(%rdi),%rdi     <-- trapping instruction
>   	e8 38 27 ec ff       	callq  0xffffffffffec276c
>   	48 ff 05 bf af 80 01 	incq   0x180afbf(%rip)        # 0x180affa
>   	c9                   	leaveq
>   	c3                   	retq
> 
> which is the access of "drv->p" in that function:
> 
>    kobject_put(&drv->p->kobj);
> 
> so "drv" that was passed in was just bogus. (it's
> "0xffffffffa06a8430", looks like it's the DEBUG_PAGEALLOC that has
> caused the page to be free'd).
> 
>> [   68.340115] Call Trace:
>> [   68.340115]  [<ffffffff813fc64b>] driver_register+0xc0/0x1b2
>> [   68.340115]  [<ffffffff8137f5de>] pnp_register_driver+0x28/0x31
>> [   68.340115]  [<ffffffffa06b888d>] init_ipmi_si+0x1a4/0x4cd [ipmi_si]
>> [   68.340115]  [<ffffffff810020a6>] do_one_initcall+0x6c/0x1e3
>> [   68.340115]  [<ffffffff810d4998>] sys_init_module+0x12b/0x307
> 
> And I think that - as usual - the problem is that the damn driver
> cleanup is very ugly, and has this duplicate set of code to unregister
> all the random crap. Except one of the duplicates is missing one case.
> I think the bug was introduced by Gjorn Helgaas in commit 9e368fa011d4
> ("ipmi: add PNP discovery (ACPI namespace via PNPACPI)") which added
> the acpi pnp case, but only unregistered it on the regular module exit
> path, not on the "module loaded with no pnp devices" path.
> 
> Does this patch fix it? And Corey - this is a good example of why the
> code shouldn't duplicate the "unregister stuff" in the module load
> error case vs the module exit path, and there should be a shared
> "cleanup()" function that is called by both. Can this be cleaned up,
> please?
> 
> PATCH IS UNTESTED!

That works.

Acked-and-tested-by: Randy Dunlap <randy.dunlap@oracle.com>

thanks,
-- 
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Heads up Linux 2.6.38-rc4 compile problems.
  2011-02-09 16:02         ` Linus Torvalds
@ 2011-02-13 17:39           ` Linus Torvalds
  2011-02-14  2:04             ` Eric W. Biederman
  0 siblings, 1 reply; 62+ messages in thread
From: Linus Torvalds @ 2011-02-13 17:39 UTC (permalink / raw)
  To: Alex Riesen, Eric W. Biederman; +Cc: David Miller, Linux Kernel Mailing List

On Wed, Feb 9, 2011 at 8:02 AM, Linus Torvalds
<torvalds@linux-foundation.org> wrote:
>
> Well, the thing is, Eric said he was using ext4.
>
> And there are absolutely no changes I can see after -rc3 that would
> affect anything like this.

Hmm. Eric - mind testing current -git?

J. R. Okajima found a possible problem with the new RCU filename
lookup, which could corrupt the filp_cache. I'd expect the normal
result to be an oops, but maybe there could be memory corruption. And
the easiest way to trigger it would probably be to have lots of
concurrent fs activity with renames.

Now, it's not new to -rc4: the whole rcu lookup thing was merged into
-rc1. But since I still don't see anything that looks likely to be
introduced after -rc3, it might not hurt to think that maybe it's just
rare enough that you just thought -rc3 was ok, and then you were
unlucky with -rc4.

                                Linus

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Heads up Linux 2.6.38-rc4 compile problems.
  2011-02-13 17:39           ` Linus Torvalds
@ 2011-02-14  2:04             ` Eric W. Biederman
  2011-02-14  2:45               ` Linus Torvalds
  0 siblings, 1 reply; 62+ messages in thread
From: Eric W. Biederman @ 2011-02-14  2:04 UTC (permalink / raw)
  To: Linus Torvalds; +Cc: Alex Riesen, David Miller, Linux Kernel Mailing List

Linus Torvalds <torvalds@linux-foundation.org> writes:

> On Wed, Feb 9, 2011 at 8:02 AM, Linus Torvalds
> <torvalds@linux-foundation.org> wrote:
>>
>> Well, the thing is, Eric said he was using ext4.
>>
>> And there are absolutely no changes I can see after -rc3 that would
>> affect anything like this.
>
> Hmm. Eric - mind testing current -git?

Sorry for taking so long to get back to this.  I came down with
a nasty cold and haven't been had much time.

While I haven't been doing anything the machine has been still running
the builds so I have some interesting test results.

The build failures appear to have been due to a corrupted ccache. A
coworker turned off using the ccache and the compiles started working
again.  Unfortunately I can't qualify when my ccache got corrupted,
or give a hint at which kernel bug caused the corrupted cache.  I
expected it happened in whatever I tested just before -rc3.


There is something corrupting my page tables.

messages:Feb 13 12:50:00 bs38 kernel: BUG: Bad page map in process [manager]  pte:ffff88028688b748 pmd:28688b067
messages:Feb 13 12:50:00 bs38 kernel: BUG: Bad page map in process [manager]  pte:ffff88028688b748 pmd:28688b067
messages:Feb 13 12:52:17 bs38 kernel: BUG: Bad page map in process [manager]  pte:ffff880011065748 pmd:11065067
messages:Feb 13 12:52:17 bs38 kernel: BUG: Bad page map in process [manager]  pte:ffff880011065748 pmd:11065067
messages:Feb 13 12:52:27 bs38 kernel: BUG: Bad page map in process [manager]  pte:ffff8802460d3748 pmd:2460d3067
messages:Feb 13 12:52:27 bs38 kernel: BUG: Bad page map in process [manager]  pte:ffff8802460d3748 pmd:2460d3067
messages-20110213:Feb  7 05:50:21 bs38 kernel: BUG: Bad page map in process [manager]  pte:ffff8801d256b748 pmd:1d256b067
messages-20110213:Feb  7 05:50:21 bs38 kernel: BUG: Bad page map in process [manager]  pte:ffff8801d256b748 pmd:1d256b067
messages-20110213:Feb  7 18:34:32 bs38 kernel: BUG: Bad page map in process Mlag  pte:ffff8800cad2d748 pmd:cad2d067
messages-20110213:Feb  7 18:34:33 bs38 kernel: BUG: Bad page map in process Mlag  pte:ffff8800cad2d748 pmd:cad2d067
messages-20110213:Feb  7 18:35:11 bs38 kernel: BUG: Bad page map in process [manager]  pte:ffff88003c021748 pmd:3c021067
messages-20110213:Feb  7 18:35:12 bs38 kernel: BUG: Bad page map in process [manager]  pte:ffff88003c021748 pmd:3c021067
messages-20110213:Feb  8 04:08:26 bs38 kernel: BUG: Bad page map in process IgmpSnooping  pte:ffff880288b29748 pmd:288b29067
messages-20110213:Feb  8 04:08:26 bs38 kernel: BUG: Bad page map in process IgmpSnooping  pte:ffff880288b29748 pmd:288b29067
messages-20110213:Feb 10 14:21:34 bs38 kernel: BUG: Bad page map in process pylint  pte:ffff8802984d7c28 pmd:2984d7067
messages-20110213:Feb 10 14:21:35 bs38 kernel: BUG: Bad page map in process pylint  pte:ffff8802984d7c28 pmd:2984d7067
messages-20110213:Feb 11 00:02:32 bs38 kernel: BUG: soft lockup - CPU#5 stuck for 67s! [kswapd0:57]
messages-20110213:Feb 11 02:03:33 bs38 kernel: BUG: Bad page map in process configure  pte:ffff880299b1b748 pmd:299b1b067
messages-20110213:Feb 11 02:03:33 bs38 kernel: BUG: Bad page map in process configure  pte:ffff880299b1b748 pmd:299b1b067
messages-20110213:Feb 11 17:16:36 bs38 kernel: BUG: Bad page map in process [manager]  pte:ffff88013efa9748 pmd:13efa9067
messages-20110213:Feb 11 17:16:37 bs38 kernel: BUG: Bad page map in process [manager]  pte:ffff88013efa9748 pmd:13efa9067

> J. R. Okajima found a possible problem with the new RCU filename
> lookup, which could corrupt the filp_cache. I'd expect the normal
> result to be an oops, but maybe there could be memory corruption. And
> the easiest way to trigger it would probably be to have lots of
> concurrent fs activity with renames.

It does look like I have seen something like that.  I will update
shortly and hopefully I can see something tomorrow.

I still have about half a dozen unclassified failures of my tests under
-rc4 that I haven't been seen anywhere.  But at least I have them all
running

> Now, it's not new to -rc4: the whole rcu lookup thing was merged into
> -rc1. But since I still don't see anything that looks likely to be
> introduced after -rc3, it might not hurt to think that maybe it's just
> rare enough that you just thought -rc3 was ok, and then you were
> unlucky with -rc4.

I have some unexpected kernel crashes as well.
With 2.6.38-rc3 (something I think this was a git snapshot) I saw:

<1>BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
<1>IP: [<ffffffff81069008>] do_raw_spin_lock+0x9/0x1a
<4>PGD 0 
<0>Oops: 0002 [#1] SMP 
<0>last sysfs file: /sys/devices/system/cpu/cpu7/cache/index2/shared_cpu_map
<4>CPU 5 
<4>Modules linked in: macvtap ipt_LOG xt_limit ipt_REJECT xt_hl xt_state dummy tulip xt_tcpudp iptable_filter inet_diag veth macvlan nfsd lockd nfs_acl auth_rpcgss exportfs sunrpc dm_mirror dm_region_hash dm_log uinput bonding ipv6 kvm_intel kvm fuse xt_multiport iptable_nat ip_tables nf_nat x_tables nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 tun 8021q serio_raw sg shpchp pcspkr i5k_amb iTCO_wdt iTCO_vendor_support i2c_i801 i5400_edac ioatdma ghes microcode edac_core hed dca radeon ttm drm_kms_helper drm hwmon sr_mod i2c_algo_bit i2c_core uhci_hcd igb ehci_hcd cdrom netxen_nic dm_mod [last unloaded: mperf]
<4>
<4>Pid: 57, comm: kswapd0 Tainted: G    B       2.6.38-rc3-355347.2010AroraKernelBeta.fc14.x86_64 #1 X7DWU/X7DWU
<4>RIP: 0010:[<ffffffff81069008>]  [<ffffffff81069008>] do_raw_spin_lock+0x9/0x1a
<4>RSP: 0000:ffff880296ee5a90  EFLAGS: 00010246
<4>RAX: 0000000000000100 RBX: ffff880072d529b0 RCX: ffff880296ee5bf8
<4>RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000008
<4>RBP: ffff880296ee5a90 R08: dead000000200200 R09: dead000000100100
<4>R10: 0000000000014a0c R11: 00000000000149b8 R12: 0000000000000000
<4>R13: ffffea00060d7cc8 R14: ffff880296ee5c80 R15: 0000000000000001
<4>FS:  0000000000000000(0000) GS:ffff8800cfd40000(0000) knlGS:0000000000000000
<4>CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
<4>CR2: 0000000000000008 CR3: 0000000001803000 CR4: 00000000000006e0
<4>DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
<4>DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
<4>Process kswapd0 (pid: 57, threadinfo ffff880296ee4000, task ffff88029adc6040)
<0>Stack:
<4> ffff880296ee5aa0 ffffffff813d0a0c ffff880296ee5ad0 ffffffff810d30cd
<4> ffffea00060bdcb8 ffffea00060d7cc8 0000000000000000 ffff880072d529b1
<4> ffff880296ee5b80 ffffffff810d3633 ffffea00060bdcb8 ffffffff8181ff70
<0>Call Trace:
<4> [<ffffffff813d0a0c>] _raw_spin_lock+0x9/0xb
<4> [<ffffffff810d30cd>] __page_lock_anon_vma+0x3a/0x54
<4> [<ffffffff810d3633>] page_referenced+0xaf/0x240
<4> [<ffffffff810bbbe4>] ? pageout+0x223/0x233
<4> [<ffffffff810bcfda>] shrink_page_list+0x154/0x49e
<4> [<ffffffff810bd762>] shrink_inactive_list+0x234/0x386
<4> [<ffffffff810b79da>] ? determine_dirtyable_memory+0x18/0x21
<4> [<ffffffff810bdede>] shrink_zone+0x356/0x418
<4> [<ffffffff810b3eef>] ? zone_watermark_ok_safe+0x9c/0xa9
<4> [<ffffffff810bed0e>] kswapd+0x4f6/0x84d
<4> [<ffffffff810be818>] ? kswapd+0x0/0x84d
<4> [<ffffffff81057de9>] kthread+0x7d/0x85
<4> [<ffffffff810037a4>] kernel_thread_helper+0x4/0x10
<4> [<ffffffff81057d6c>] ? kthread+0x0/0x85
<4> [<ffffffff810037a0>] ? kernel_thread_helper+0x0/0x10
<0>Code: 00 00 01 74 05 e8 49 be 18 00 c9 c3 55 48 89 e5 f0 ff 07 c9 c3 55 48 89 e5 f0 81 07 00 00 00 01 c9 c3 55 b8 00 01 00 00 48 89 e5 <f0> 66 0f c1 07 38 e0 74 06 f3 90 8a 07 eb f6 c9 c3 55 48 89 e5 
<1>RIP  [<ffffffff81069008>] do_raw_spin_lock+0x9/0x1a
<4> RSP <ffff880296ee5a90>
<0>CR2: 0000000000000008

With 2.6.38-rc4 I have seen:
<0>general protection fault: 0000 [#1] SMP 
<0>last sysfs file: /sys/devices/system/cpu/cpu7/cache/index2/shared_cpu_map
<4>CPU 6 
<4>Modules linked in: dummy tulip xt_tcpudp iptable_filter inet_diag veth macvlan nfsd lockd nfs_acl auth_rpcgss exportfs sunrpc dm_mirror dm_region_hash dm_log uinput bonding ipv6 kvm_intel kvm fuse xt_multiport iptable_nat ip_tables nf_nat x_tables nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 tun 8021q iTCO_wdt iTCO_vendor_support i5k_amb i5400_edac ioatdma edac_core dca i2c_i801 serio_raw shpchp sg pcspkr ghes microcode hed radeon ttm drm_kms_helper drm sr_mod hwmon i2c_algo_bit i2c_core igb netxen_nic cdrom ehci_hcd uhci_hcd dm_mod [last unloaded: mperf]
<4>
<4>Pid: 7643, comm: netnsd Not tainted 2.6.38-rc4-355739.2010AroraKernelBeta.fc14.x86_64 #1 X7DWU/X7DWU
<4>RIP: 0010:[<ffffffff810326b0>]  [<ffffffff810326b0>] post_schedule+0x7/0x4e
<4>RSP: 0000:ffff8802981c5bf8  EFLAGS: 00010287
<4>RAX: 0000000000000006 RBX: ffff100367f45c28 RCX: ffff8801a6af0dc0
<4>RDX: ffff8802981c5fd8 RSI: ffff8801a6af0dc0 RDI: ffff100367f45c28
<4>RBP: ffff8802981c5c08 R08: ffff8802981c4000 R09: 0000000000000000
<4>R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800036f2a00
<4>R13: ffff880296bc2a00 R14: ffff8801a6af1068 R15: 0000000000000006
<4>FS:  0000000000000000(0000) GS:ffff8800cfd80000(0063) knlGS:00000000f74e76d0
<4>CS:  0010 DS: 002b ES: 002b CR0: 000000008005003b
<4>CR2: 00000000ffd70f80 CR3: 0000000297dc9000 CR4: 00000000000006e0
<4>DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
<4>DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
<4>Process netnsd (pid: 7643, threadinfo ffff8802981c4000, task ffff8801d2f1a260)
<0>Stack:
<4> ffff100367f45c28 ffff8800036f2a00 ffff8802981c5cb8 ffffffff813cf98c
<4> ffff8802981c5ca8 00000000000118c0 ffff8802981c5c28 ffff8802981c5c28
<4> 00000000000118c0 ffff8801d2f1a260 00000000000118c0 ffff8802981c5fd8
<0>Call Trace:
<4> [<ffffffff813cf98c>] schedule+0x544/0x577
<4> [<ffffffff813cfb4f>] schedule_timeout+0x22/0xbb
<4> [<ffffffff813d0a5f>] ? _raw_spin_unlock_irqrestore+0x11/0x13
<4> [<ffffffff81058427>] ? prepare_to_wait_exclusive+0x70/0x7b
<4> [<ffffffff813386e5>] __skb_recv_datagram+0x1ec/0x264
<4> [<ffffffff810e3da8>] ? arch_local_irq_save+0x16/0x1c
<4> [<ffffffff8133877e>] ? receiver_wake_function+0x0/0x1a
<4> [<ffffffff8133877c>] skb_recv_datagram+0x1f/0x21
<4> [<ffffffff813aefeb>] unix_accept+0x55/0x103
<4> [<ffffffff8132efcb>] sys_accept4+0xf3/0x1c3
<4> [<ffffffff81076155>] ? compat_sys_wait4+0x26/0xc3
<4> [<ffffffff813d0a4c>] ? _raw_spin_lock_irq+0x1a/0x1c
<4> [<ffffffff8104f34a>] ? do_sigaction+0x168/0x179
<4> [<ffffffff8102e15b>] ? ia32_restore_sigcontext+0x136/0x15c
<4> [<ffffffff81353b97>] compat_sys_socketcall+0x17d/0x186
<4> [<ffffffff8102cd90>] sysenter_dispatch+0x7/0x2e
<0>Code: 49 89 c4 8b 75 e8 48 89 df 31 c9 e8 a3 d4 ff ff 4c 89 e6 48 89 df e8 ae e3 39 00 48 83 c4 20 5b 41 5c c9 c3 55 48 89 e5 41 54 53 <83> bf 74 08 00 00 00 48 89 fb 74 36 e8 4d e3 39 00 49 89 c4 48 
<1>RIP  [<ffffffff810326b0>] post_schedule+0x7/0x4e
<4> RSP <ffff8802981c5bf8>


With 2.6.38-rc4 I have seen:
<1>BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
<1>IP: [<ffffffff811016cb>] shrink_dcache_parent+0x104/0x23c
<4>PGD 15a66d067 PUD 15a65a067 PMD 0 
<0>Oops: 0002 [#1] SMP 
<0>last sysfs file: /sys/devices/system/cpu/cpu7/cache/index2/shared_cpu_map
<4>CPU 5 
<4>Modules linked in: macvtap ipt_LOG xt_limit ipt_REJECT xt_hl xt_state dummy tulip xt_tcpudp iptable_filter inet_diag veth macvlan nfsd lockd nfs_acl auth_rpcgss exportfs sunrpc dm_mirror dm_region_hash dm_log uinput bonding ipv6 kvm_intel kvm fuse xt_multiport iptable_nat ip_tables nf_nat x_tables nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 tun 8021q i5k_amb i5400_edac edac_core iTCO_wdt iTCO_vendor_support ioatdma dca i2c_i801 shpchp sg ghes hed pcspkr serio_raw microcode radeon ttm drm_kms_helper drm sr_mod cdrom ehci_hcd hwmon i2c_algo_bit i2c_core netxen_nic uhci_hcd igb dm_mod [last unloaded: mperf]
<4>
<4>Pid: 24433, comm: netnsd Tainted: G    B       2.6.38-rc4-355739.2010AroraKernelBeta.fc14.x86_64 #1 X7DWU/X7DWU
<4>RIP: 0010:[<ffffffff811016cb>]  [<ffffffff811016cb>] shrink_dcache_parent+0x104/0x23c
<4>RSP: 0018:ffff8802633c9bb8  EFLAGS: 00010213
<4>RAX: ffffffff8141c100 RBX: ffff880128e3d600 RCX: ffff880128e3d738
<4>RDX: 0000000000000000 RSI: ffff880128e3d740 RDI: ffffffff818022c0
<4>RBP: ffff8802633c9c18 R08: 0000000000000004 R09: ffff880128e3d638
<4>R10: ffff8802633c9c65 R11: 0000000000000000 R12: ffff880128e3d748
<4>R13: 0000000000000004 R14: ffff880128e3d600 R15: ffff880128e3d6b8
<4>FS:  0000000000000000(0000) GS:ffff8800cfd40000(0063) knlGS:00000000f746b6d0
<4>CS:  0010 DS: 002b ES: 002b CR0: 000000008005003b
<4>CR2: 0000000000000008 CR3: 00000001e4181000 CR4: 00000000000006e0
<4>DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
<4>DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
<4>Process netnsd (pid: 24433, threadinfo ffff8802633c8000, task ffff880296870000)
<0>Stack:
<4> ffff88004ec85000 00b2130a00000000 ffff8802633c8000 ffff880128e3d65c
<4> ffff8802633c9be8 ffff8801c6826cc0 ffff8802633c9c48 ffff8802633c9c58
<4> 0000000000000002 ffff88019d1f2500 00000000000013bf ffff8802633c9c48
<0>Call Trace:
<4> [<ffffffff8113c8bc>] proc_flush_task+0xae/0x1d2
<4> [<ffffffff8104061a>] release_task+0x35/0x3b9
<4> [<ffffffff81040f53>] wait_consider_task+0x5b5/0x911
<4> [<ffffffff810413a6>] do_wait+0xf7/0x222
<4> [<ffffffff8104266f>] sys_wait4+0x99/0xbc
<4> [<ffffffff8104038f>] ? child_wait_callback+0x0/0x53
<4> [<ffffffff81076155>] compat_sys_wait4+0x26/0xc3
<4> [<ffffffff813d0a4c>] ? _raw_spin_lock_irq+0x1a/0x1c
<4> [<ffffffff8104f34a>] ? do_sigaction+0x168/0x179
<4> [<ffffffff810024c1>] ? do_notify_resume+0x27/0x69
<4> [<ffffffff8102d9e0>] sys32_waitpid+0xb/0xd
<4> [<ffffffff8102cd90>] sysenter_dispatch+0x7/0x2e
<0>Code: 00 49 89 87 80 00 00 00 49 89 8f 88 00 00 00 48 89 11 49 8b 47 68 ff 05 28 04 72 00 ff 80 f0 00 00 00 eb 33 49 8b b7 88 00 00 00 <48> 89 72 08 48 89 16 48 8b 90 e8 00 00 00 48 89 88 e8 00 00 00 
<1>RIP  [<ffffffff811016cb>] shrink_dcache_parent+0x104/0x23c
<4> RSP <ffff8802633c9bb8>
<0>CR2: 0000000000000008

Eric

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Heads up Linux 2.6.38-rc4 compile problems.
  2011-02-14  2:04             ` Eric W. Biederman
@ 2011-02-14  2:45               ` Linus Torvalds
  2011-02-14  3:40                 ` Eric W. Biederman
  0 siblings, 1 reply; 62+ messages in thread
From: Linus Torvalds @ 2011-02-14  2:45 UTC (permalink / raw)
  To: Eric W. Biederman
  Cc: Alex Riesen, David Miller, Linux Kernel Mailing List, Andrew Morton

On Sun, Feb 13, 2011 at 6:04 PM, Eric W. Biederman
<ebiederm@xmission.com> wrote:
>
> The build failures appear to have been due to a corrupted ccache. A
> coworker turned off using the ccache and the compiles started working
> again.  Unfortunately I can't qualify when my ccache got corrupted,
> or give a hint at which kernel bug caused the corrupted cache.  I
> expected it happened in whatever I tested just before -rc3.

Ok, that certainly explains how it was reproducible, and why it would
show up in rc4 despite there not being a lot of reasons for any of the
post-rc3 changes to introduce anything like that.

It does sound like memory corruption. I'm not at all sure that it's
the rcu lookup thing (although it's a possible case), and especially
if you've been playing around with some of the more experimental VM
features (memcg? transparent hugepage? migration/compaction?) it could
easily be something there. There's been several bug-fixes in those
areas.

Having SLUB debugging on would be a good start. Obviously,
CONFIG_DEBUG_PAGEALLOC would be wondeful, but it's expensive as heck,
so it can be a bit painful to use on a machine that is actually used
for real work. But it can really help pinpoint those kinds of
problems.

> There is something corrupting my page tables.
>
> messages:Feb 13 12:50:00 bs38 kernel: BUG: Bad page map in process [manager]  pte:ffff88028688b748 pmd:28688b067
> messages:Feb 13 12:50:00 bs38 kernel: BUG: Bad page map in process [manager]  pte:ffff88028688b748 pmd:28688b067
> messages:Feb 13 12:52:17 bs38 kernel: BUG: Bad page map in process [manager]  pte:ffff880011065748 pmd:11065067

Odd pattern. That is a totally invalid pte, and I do not see what the
pattern would come from. It's a kernel pointer, afaik, and obviously
shouldn't show up in the pte.

But it could be the result of a use-after-free. Or a double free.
Which I _think_ is that rcu lookup bug pattern, but I may be barking
up the wrong tree. Again, SLUB or PAGEALLOC debugging would probably
give more information.

I'm adding Andrew to the cc too, in case it's simply some of the VM patches.

> I have some unexpected kernel crashes as well.
> With 2.6.38-rc3 (something I think this was a git snapshot) I saw:
>
> <1>BUG: unable to handle kernel NULL pointer dereference at 0000000000000008

The instruction is the "lock xadd %ax,(%rdi)" that is the actual
locked spin-lock instruction. It's this:

   spin_lock(&root_anon_vma->lock);

in __page_lock_anon_vma(), and %rdi is 8. Which is consistent with
root_anon_vma being NULL.

> <0>Call Trace:
> <4> [<ffffffff813d0a0c>] _raw_spin_lock+0x9/0xb
> <4> [<ffffffff810d30cd>] __page_lock_anon_vma+0x3a/0x54
> <4> [<ffffffff810d3633>] page_referenced+0xaf/0x240
> <4> [<ffffffff810bcfda>] shrink_page_list+0x154/0x49e
> <4> [<ffffffff810bd762>] shrink_inactive_list+0x234/0x386
> <4> [<ffffffff810bdede>] shrink_zone+0x356/0x418
> <4> [<ffffffff810bed0e>] kswapd+0x4f6/0x84d
> <4> [<ffffffff81057de9>] kthread+0x7d/0x85
> <4> [<ffffffff810037a4>] kernel_thread_helper+0x4/0x10

It goes without saying that root_anon_vma shouldn't have been NULL
here. But maybe this triggers something for Andrew?

> With 2.6.38-rc4 I have seen:
> <0>general protection fault: 0000 [#1] SMP
> <4>RIP: 0010:[<ffffffff810326b0>]  [<ffffffff810326b0>] post_schedule+0x7/0x4e
> <4>RSP: 0000:ffff8802981c5bf8  EFLAGS: 00010287
> <4>RAX: 0000000000000006 RBX: ffff100367f45c28 RCX: ffff8801a6af0dc0
> <4>RDX: ffff8802981c5fd8 RSI: ffff8801a6af0dc0 RDI: ffff100367f45c28
> <0>Call Trace:
> <4> [<ffffffff813cf98c>] schedule+0x544/0x577
> <4> [<ffffffff813cfb4f>] schedule_timeout+0x22/0xbb
> <4> [<ffffffff813386e5>] __skb_recv_datagram+0x1ec/0x264
> <4> [<ffffffff8133877c>] skb_recv_datagram+0x1f/0x21
> <4> [<ffffffff813aefeb>] unix_accept+0x55/0x103
> <4> [<ffffffff8132efcb>] sys_accept4+0xf3/0x1c3
> <4> [<ffffffff81353b97>] compat_sys_socketcall+0x17d/0x186
> <4> [<ffffffff8102cd90>] sysenter_dispatch+0x7/0x2e
> <0>Code: 49 89 c4 8b 75 e8 48 89 df 31 c9 e8 a3 d4 ff ff 4c 89 e6 48 89 df e8 ae e3 39 00 48 83 c4 20 5b 41 5c c9 c3 55 48 89 e5 41 54 53 <83> bf 74 08 00 00 00 48 89 fb 74 36 e8 4d e3 39 00 49 89 c4 48
> <1>RIP  [<ffffffff810326b0>] post_schedule+0x7/0x4e

This is the very first memory access in post_schedule, the

   if (rq->post_schedule) {

load. (trapping instruction is "cmpl $0x0,0x874(%rdi)". With %rdi
being corrupt, and the resulting pointer being invalid, it looks like.

Odd, and looks pretty random. Maybe it really is just memory corruption.

> With 2.6.38-rc4 I have seen:
> <1>BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
> <1>IP: [<ffffffff811016cb>] shrink_dcache_parent+0x104/0x23c
> <0>Call Trace:
> <4> [<ffffffff8113c8bc>] proc_flush_task+0xae/0x1d2
> <4> [<ffffffff8104061a>] release_task+0x35/0x3b9
> <4> [<ffffffff81040f53>] wait_consider_task+0x5b5/0x911
> <4> [<ffffffff810413a6>] do_wait+0xf7/0x222
> <4> [<ffffffff8104266f>] sys_wait4+0x99/0xbc
> <4> [<ffffffff81076155>] compat_sys_wait4+0x26/0xc3
> <4> [<ffffffff8102d9e0>] sys32_waitpid+0xb/0xd
> <4> [<ffffffff8102cd90>] sysenter_dispatch+0x7/0x2e
> <0>Code: 00 49 89 87 80 00 00 00 49 89 8f 88 00 00 00 48 89 11 49 8b 47 68 ff 05 28 04 72 00 ff 80 f0 00 00 00 eb 33 49 8b b7 88 00 00 00 <48> 89 72 08 48 89 16 48 8b 90 e8 00 00 00 48 89 88 e8 00 00 00
> <1>RIP  [<ffffffff811016cb>] shrink_dcache_parent+0x104/0x23c

I dunno. That instruction sequence looks like a list_del(), but I'm
not certain ("mov %rsi,0x8(%rdx) ; mov %rdx,(%rsi)"). With %rdx being
NULL. But shrink_dcache tends to be where a lot of random memory
corruption ends up then blowing up (because the dcache is very
pointer-intensive, and it can be a large cache), so again, I don't
think the oops really tells us anything. It looks more like the
symptom rather than a cause.

                                    Linus

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Heads up Linux 2.6.38-rc4 compile problems.
  2011-02-14  2:45               ` Linus Torvalds
@ 2011-02-14  3:40                 ` Eric W. Biederman
  2011-02-14  5:34                   ` Eric W. Biederman
  0 siblings, 1 reply; 62+ messages in thread
From: Eric W. Biederman @ 2011-02-14  3:40 UTC (permalink / raw)
  To: Linus Torvalds
  Cc: Alex Riesen, David Miller, Linux Kernel Mailing List, Andrew Morton

Linus Torvalds <torvalds@linux-foundation.org> writes:

> On Sun, Feb 13, 2011 at 6:04 PM, Eric W. Biederman
> <ebiederm@xmission.com> wrote:
>>
>> The build failures appear to have been due to a corrupted ccache. A
>> coworker turned off using the ccache and the compiles started working
>> again.  Unfortunately I can't qualify when my ccache got corrupted,
>> or give a hint at which kernel bug caused the corrupted cache.  I
>> expected it happened in whatever I tested just before -rc3.
>
> Ok, that certainly explains how it was reproducible, and why it would
> show up in rc4 despite there not being a lot of reasons for any of the
> post-rc3 changes to introduce anything like that.
>
> It does sound like memory corruption. I'm not at all sure that it's
> the rcu lookup thing (although it's a possible case), and especially
> if you've been playing around with some of the more experimental VM
> features (memcg? transparent hugepage? migration/compaction?) it could
> easily be something there. There's been several bug-fixes in those
> areas.

I wish.  Our builds trigger the OOM killer is way to frequent but I
haven't figured out the magic invocation to get the memory control
groups to prevent that from happening.

This is a distribution like build so practically everything is enabled.
Let's see. Memory control groups are in there but unused.  Transparent
huge pages are not enabled.  Memory migration and compaction are not enabled.

We use kvm a little bit to but most of our stuff uses namespaces and in
particular the network namespace for testing.  And I haven't seen any
problems in the one or two tests that use vms..

> Having SLUB debugging on would be a good start. Obviously,
> CONFIG_DEBUG_PAGEALLOC would be wondeful, but it's expensive as heck,
> so it can be a bit painful to use on a machine that is actually used
> for real work. But it can really help pinpoint those kinds of
> problems.

If the problems persist I will look at what I can start turning on in
that direction.

>> There is something corrupting my page tables.
>>
>> messages:Feb 13 12:50:00 bs38 kernel: BUG: Bad page map in process [manager]  pte:ffff88028688b748 pmd:28688b067
>> messages:Feb 13 12:50:00 bs38 kernel: BUG: Bad page map in process [manager]  pte:ffff88028688b748 pmd:28688b067
>> messages:Feb 13 12:52:17 bs38 kernel: BUG: Bad page map in process [manager]  pte:ffff880011065748 pmd:11065067
>
> Odd pattern. That is a totally invalid pte, and I do not see what the
> pattern would come from. It's a kernel pointer, afaik, and obviously
> shouldn't show up in the pte.
>
> But it could be the result of a use-after-free. Or a double free.
> Which I _think_ is that rcu lookup bug pattern, but I may be barking
> up the wrong tree. Again, SLUB or PAGEALLOC debugging would probably
> give more information.
>
> I'm adding Andrew to the cc too, in case it's simply some of the VM patches.
>
>> I have some unexpected kernel crashes as well.
>> With 2.6.38-rc3 (something I think this was a git snapshot) I saw:
>>
>> <1>BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
>
> The instruction is the "lock xadd %ax,(%rdi)" that is the actual
> locked spin-lock instruction. It's this:
>
>    spin_lock(&root_anon_vma->lock);
>
> in __page_lock_anon_vma(), and %rdi is 8. Which is consistent with
> root_anon_vma being NULL.
>
>> <0>Call Trace:
>> <4> [<ffffffff813d0a0c>] _raw_spin_lock+0x9/0xb
>> <4> [<ffffffff810d30cd>] __page_lock_anon_vma+0x3a/0x54
>> <4> [<ffffffff810d3633>] page_referenced+0xaf/0x240
>> <4> [<ffffffff810bcfda>] shrink_page_list+0x154/0x49e
>> <4> [<ffffffff810bd762>] shrink_inactive_list+0x234/0x386
>> <4> [<ffffffff810bdede>] shrink_zone+0x356/0x418
>> <4> [<ffffffff810bed0e>] kswapd+0x4f6/0x84d
>> <4> [<ffffffff81057de9>] kthread+0x7d/0x85
>> <4> [<ffffffff810037a4>] kernel_thread_helper+0x4/0x10
>
> It goes without saying that root_anon_vma shouldn't have been NULL
> here. But maybe this triggers something for Andrew?
>
>> With 2.6.38-rc4 I have seen:
>> <0>general protection fault: 0000 [#1] SMP
>> <4>RIP: 0010:[<ffffffff810326b0>]  [<ffffffff810326b0>] post_schedule+0x7/0x4e
>> <4>RSP: 0000:ffff8802981c5bf8  EFLAGS: 00010287
>> <4>RAX: 0000000000000006 RBX: ffff100367f45c28 RCX: ffff8801a6af0dc0
>> <4>RDX: ffff8802981c5fd8 RSI: ffff8801a6af0dc0 RDI: ffff100367f45c28
>> <0>Call Trace:
>> <4> [<ffffffff813cf98c>] schedule+0x544/0x577
>> <4> [<ffffffff813cfb4f>] schedule_timeout+0x22/0xbb
>> <4> [<ffffffff813386e5>] __skb_recv_datagram+0x1ec/0x264
>> <4> [<ffffffff8133877c>] skb_recv_datagram+0x1f/0x21
>> <4> [<ffffffff813aefeb>] unix_accept+0x55/0x103
>> <4> [<ffffffff8132efcb>] sys_accept4+0xf3/0x1c3
>> <4> [<ffffffff81353b97>] compat_sys_socketcall+0x17d/0x186
>> <4> [<ffffffff8102cd90>] sysenter_dispatch+0x7/0x2e
>> <0>Code: 49 89 c4 8b 75 e8 48 89 df 31 c9 e8 a3 d4 ff ff 4c 89 e6 48 89 df e8 ae e3 39 00 48 83 c4 20 5b 41 5c c9 c3 55 48 89 e5 41 54 53 <83> bf 74 08 00 00 00 48 89 fb 74 36 e8 4d e3 39 00 49 89 c4 48
>> <1>RIP  [<ffffffff810326b0>] post_schedule+0x7/0x4e
>
> This is the very first memory access in post_schedule, the
>
>    if (rq->post_schedule) {
>
> load. (trapping instruction is "cmpl $0x0,0x874(%rdi)". With %rdi
> being corrupt, and the resulting pointer being invalid, it looks like.
>
> Odd, and looks pretty random. Maybe it really is just memory corruption.
>
>> With 2.6.38-rc4 I have seen:
>> <1>BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
>> <1>IP: [<ffffffff811016cb>] shrink_dcache_parent+0x104/0x23c
>> <0>Call Trace:
>> <4> [<ffffffff8113c8bc>] proc_flush_task+0xae/0x1d2
>> <4> [<ffffffff8104061a>] release_task+0x35/0x3b9
>> <4> [<ffffffff81040f53>] wait_consider_task+0x5b5/0x911
>> <4> [<ffffffff810413a6>] do_wait+0xf7/0x222
>> <4> [<ffffffff8104266f>] sys_wait4+0x99/0xbc
>> <4> [<ffffffff81076155>] compat_sys_wait4+0x26/0xc3
>> <4> [<ffffffff8102d9e0>] sys32_waitpid+0xb/0xd
>> <4> [<ffffffff8102cd90>] sysenter_dispatch+0x7/0x2e
>> <0>Code: 00 49 89 87 80 00 00 00 49 89 8f 88 00 00 00 48 89 11 49 8b 47 68 ff 05 28 04 72 00 ff 80 f0 00 00 00 eb 33 49 8b b7 88 00 00 00 <48> 89 72 08 48 89 16 48 8b 90 e8 00 00 00 48 89 88 e8 00 00 00
>> <1>RIP  [<ffffffff811016cb>] shrink_dcache_parent+0x104/0x23c
>
> I dunno. That instruction sequence looks like a list_del(), but I'm
> not certain ("mov %rsi,0x8(%rdx) ; mov %rdx,(%rsi)"). With %rdx being
> NULL. But shrink_dcache tends to be where a lot of random memory
> corruption ends up then blowing up (because the dcache is very
> pointer-intensive, and it can be a large cache), so again, I don't
> think the oops really tells us anything. It looks more like the
> symptom rather than a cause.

Agreed.  Except for the pmd corruption I haven't seen any of these more
than once.

Eric

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Heads up Linux 2.6.38-rc4 compile problems.
  2011-02-14  3:40                 ` Eric W. Biederman
@ 2011-02-14  5:34                   ` Eric W. Biederman
  2011-02-14 15:26                     ` Linus Torvalds
                                       ` (2 more replies)
  0 siblings, 3 replies; 62+ messages in thread
From: Eric W. Biederman @ 2011-02-14  5:34 UTC (permalink / raw)
  To: Linus Torvalds
  Cc: Alex Riesen, David Miller, Linux Kernel Mailing List, Andrew Morton


And for completeness.  When I was rebooting v2.6.38-rc4 to start running
795abaf1e4e188c4171e3cd3dbb11a9fcacaf505  I hit this.

Sigh.  I wish crash worked on something besides redhats enterprise
kernels.  Then I could use the system core file I have to do more than
extract the dmesg.

Eric

<0>------------[ cut here ]------------
<2>kernel BUG at mm/filemap.c:125!
<0>invalid opcode: 0000 [#1] SMP 
<0>last sysfs file: /sys/devices/virtual/net/sit0/uevent
<4>CPU 5 
<4>Modules linked in: sit tunnel4 macvtap ipt_LOG xt_limit ipt_REJECT xt_hl xt_state dummy tulip xt_tcpudp iptable_filter inet_diag veth macvlan nfsd lockd nfs_acl auth_rpcgss exportfs sunrpc dm_mirror dm_region_hash dm_log uinput bonding ipv6 kvm_intel kvm fuse xt_multiport iptable_nat ip_tables nf_nat x_tables nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 tun 8021q i5k_amb iTCO_wdt i5400_edac ioatdma iTCO_vendor_support edac_core i2c_i801 dca shpchp ghes hed microcode sg serio_raw pcspkr radeon ttm drm_kms_helper drm hwmon i2c_algo_bit i2c_core ehci_hcd uhci_hcd sr_mod cdrom igb netxen_nic dm_mod [last unloaded: mperf]
<4>
<4>Pid: 2611, comm: umount Tainted: G    B       2.6.38-rc4-355739.2010AroraKernelBeta.fc14.x86_64 #1 X7DWU/X7DWU
<4>RIP: 0010:[<ffffffff810b0cd7>]  [<ffffffff810b0cd7>] __remove_from_page_cache+0x54/0xb9
<4>RSP: 0018:ffff880296397c28  EFLAGS: 00010046
<4>RAX: 0000000000000000 RBX: ffffea00086cf1b8 RCX: 00000000ffffffc8
<4>RDX: 0000000000000009 RSI: 0000000000000009 RDI: ffff8802affece00
<4>RBP: ffff880296397c38 R08: 0000000000000000 R09: de80000000000000
<4>R10: ffff88028a4f6aa8 R11: ffff8802affece00 R12: ffff8801a7588578
<4>R13: ffff8801a7588590 R14: ffff880296397cc8 R15: ffffffffffffffff
<4>FS:  00007fbde33db760(0000) GS:ffff8800cfd40000(0000) knlGS:0000000000000000
<4>CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
<4>CR2: 0000003928271610 CR3: 0000000295e3b000 CR4: 00000000000006e0
<4>DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
<4>DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
<4>Process umount (pid: 2611, threadinfo ffff880296396000, task ffff88007d62d960)
<0>Stack:
<4> ffffea00086cf1b8 0000000000000000 ffff880296397c68 ffffffff810b0d75
<4> ffff880296397cc8 ffffea00086cf1b8 ffff8801a7588578 ffff8801a7588578
<4> ffff880296397c88 ffffffff810b9b5e 0000000000000000 0000000000000005
<0>Call Trace:
<4> [<ffffffff810b0d75>] remove_from_page_cache+0x39/0x5c
<4> [<ffffffff810b9b5e>] truncate_inode_page+0x63/0x77
<4> [<ffffffff810b9c3c>] truncate_inode_pages_range+0xca/0x2e9
<4> [<ffffffff811876ae>] ? ext4_discard_preallocations+0x88/0x309
<4> [<ffffffff810b9e68>] truncate_inode_pages+0xd/0xf
<4> [<ffffffff8116716a>] ext4_evict_inode+0x4b/0x213
<4> [<ffffffff8110389d>] evict+0x1f/0x88
<4> [<ffffffff81103945>] dispose_list+0x3f/0xce
<4> [<ffffffff81104652>] ? evict_inodes+0xe4/0x124
<4> [<ffffffff8110467b>] evict_inodes+0x10d/0x124
<4> [<ffffffff810f1e2c>] generic_shutdown_super+0x60/0xf0
<4> [<ffffffff810f1ede>] kill_block_super+0x22/0x65
<4> [<ffffffff810f2139>] deactivate_locked_super+0x21/0x41
<4> [<ffffffff810f2c2d>] deactivate_super+0x35/0x39
<4> [<ffffffff81106fa3>] mntput_no_expire+0xcb/0xd0
<4> [<ffffffff81107ae4>] sys_umount+0x2e9/0x317
<4> [<ffffffff810f8afe>] ? path_put+0x1d/0x21
<4> [<ffffffff81002992>] system_call_fastpath+0x16/0x1b
<0>Code: be 09 00 00 00 48 89 df e8 5b 45 01 00 48 8b 03 a9 00 00 08 00 74 0d be 16 00 00 00 48 89 df e8 44 45 01 00 8b 43 0c 85 c0 78 02 <0f> 0b 48 8b 03 a8 10 74 57 49 8b 44 24 68 f6 40 20 01 75 4c 48 
<1>RIP  [<ffffffff810b0cd7>] __remove_from_page_cache+0x54/0xb9
<4> RSP <ffff880296397c28>


^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: lockdep: possible reason: unannotated irqs-off. (was: Re: Linux 2.6.38-rc4)
  2011-02-08 14:18           ` Peter Zijlstra
                               ` (2 preceding siblings ...)
  2011-02-09  1:46             ` lockdep: possible reason: unannotated irqs-off. (was: Re: Linux 2.6.38-rc4) Yong Zhang
@ 2011-02-14 14:51             ` Yong Zhang
  2011-02-14 18:53               ` Thomas Gleixner
  3 siblings, 1 reply; 62+ messages in thread
From: Yong Zhang @ 2011-02-14 14:51 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Borislav Petkov, Linus Torvalds, Linux Kernel Mailing List, x86,
	tglx, Ingo Molnar, Andrew Morton

On Tue, Feb 08, 2011 at 03:18:00PM +0100, Peter Zijlstra wrote:
> Subject: lockdep, timer: Revert the del_timer_sync() annotation
> 
> Both attempts at trying to allow softirq usage failed, revert for this
> release and try again later.
> 
> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
> ---
>  kernel/timer.c |    8 +++-----
>  1 files changed, 3 insertions(+), 5 deletions(-)
> 
> diff --git a/kernel/timer.c b/kernel/timer.c
> index 343ff27..c848cd8 100644
> --- a/kernel/timer.c
> +++ b/kernel/timer.c
> @@ -959,7 +959,7 @@ EXPORT_SYMBOL(try_to_del_timer_sync);
>   *
>   * Synchronization rules: Callers must prevent restarting of the timer,
>   * otherwise this function is meaningless. It must not be called from
> - * hardirq contexts. The caller must not hold locks which would prevent
> + * interrupt contexts. The caller must not hold locks which would prevent

I think we don't need to revert this comment.

>   * completion of the timer's handler. The timer's handler must not call
>   * add_timer_on(). Upon exit the timer is not queued and the handler is
>   * not running on any CPU.
> @@ -971,12 +971,10 @@ int del_timer_sync(struct timer_list *timer)
>  #ifdef CONFIG_LOCKDEP
>  	unsigned long flags;
>  
> -	raw_local_irq_save(flags);
> -	local_bh_disable();
> +	local_irq_save(flags);

Going back to local_irq_save()/local_irq_restore() doesn't prevent
it from using in softirq context.

Thanks,
Yong

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Heads up Linux 2.6.38-rc4 compile problems.
  2011-02-14  5:34                   ` Eric W. Biederman
@ 2011-02-14 15:26                     ` Linus Torvalds
  2011-02-14 15:37                     ` Eric W. Biederman
  2011-02-14 16:58                     ` Mike Snitzer
  2 siblings, 0 replies; 62+ messages in thread
From: Linus Torvalds @ 2011-02-14 15:26 UTC (permalink / raw)
  To: Eric W. Biederman
  Cc: Alex Riesen, David Miller, Linux Kernel Mailing List, Andrew Morton

On Sun, Feb 13, 2011 at 9:34 PM, Eric W. Biederman
<ebiederm@xmission.com> wrote:
>
> And for completeness.  When I was rebooting v2.6.38-rc4 to start running
> 795abaf1e4e188c4171e3cd3dbb11a9fcacaf505  I hit this.

.. but this was while still running the older kernel, right?

> <2>kernel BUG at mm/filemap.c:125!

I suspect this is "normal" after page table corruption. Any page that
was mapped but overwritten by the corruption would never get unmapped
(since it can't be found in the page tables), and then you trigger the

  BUG_ON(page_mapped(page));

in __remove_from_page_cache() at umount time. Your register state
shows that %eax is 0, and that's the count that we tested
("page->_mapcount" is -1 when there are no mappings, so you have one
lost mapping reference to that page).

So that oops isn't all that interesting, I'm afraid.

                             Linus

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Heads up Linux 2.6.38-rc4 compile problems.
  2011-02-14  5:34                   ` Eric W. Biederman
  2011-02-14 15:26                     ` Linus Torvalds
@ 2011-02-14 15:37                     ` Eric W. Biederman
  2011-02-14 16:37                       ` Linus Torvalds
  2011-02-14 16:58                     ` Mike Snitzer
  2 siblings, 1 reply; 62+ messages in thread
From: Eric W. Biederman @ 2011-02-14 15:37 UTC (permalink / raw)
  To: Linus Torvalds
  Cc: Alex Riesen, David Miller, Linux Kernel Mailing List, Andrew Morton

[-- Attachment #1: Type: text/plain, Size: 580 bytes --]


795abaf1e4e188c4171e3cd3dbb11a9fcacaf505  is not fairing too well.

The Bad PMDs may be happening more frequently but the oops that killed
me was a NULL pointer dereference in acct_collect this time.  Ugh.

My last two reboot records from last.
reboot   system boot  2.6.38-rc4-35764 Mon Feb 14 04:38 - 07:25  (02:47)    
reboot   system boot  2.6.38-rc4-35764 Sun Feb 13 21:27 - 07:25  (09:58)    
What was that 5 hours the kernel lasted before it died?

The entire dmesg is attached.

I am going to attempt to enable some debugging and see if that flushes
anything out.

Eric


[-- Attachment #2: dmesg-bs38-2011-02-14-12:26:46 --]
[-- Type: text/plain, Size: 396528 bytes --]

<6>Initializing cgroup subsys cpuset
<6>Initializing cgroup subsys cpu
<5>Linux version 2.6.38-rc4-357643.2010AroraKernelBeta.fc14.x86_64 (arastra@local19.aristanetworks.com) (gcc version 4.5.1 20100924 (Red Hat 4.5.1-4) (GCC) ) #1 SMP Sun Feb 13 18:25:40 PST 2011
<6>Command line: ro root=LABEL=/ rhgb quiet crashkernel=128M rd_NO_PLYMOUTH console=tty0 console=ttyS0,9600 LANG=en_US.UTF-8
<6>BIOS-provided physical RAM map:
<6> BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
<6> BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
<6> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
<6> BIOS-e820: 0000000000100000 - 00000000cfef0000 (usable)
<6> BIOS-e820: 00000000cfef0000 - 00000000cff04000 (ACPI data)
<6> BIOS-e820: 00000000cff04000 - 00000000cff05000 (ACPI NVS)
<6> BIOS-e820: 00000000cff05000 - 00000000d0000000 (reserved)
<6> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
<6> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
<6> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<6> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
<6> BIOS-e820: 0000000100000000 - 00000002b0000000 (usable)
<6>NX (Execute Disable) protection: active
<6>DMI present.
<7>DMI: X7DWU/X7DWU, BIOS  1.2 11/04/2008
<7>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
<7>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
<6>No AGP bridge found
<6>last_pfn = 0x2b0000 max_arch_pfn = 0x400000000
<7>MTRR default type: uncachable
<7>MTRR fixed ranges enabled:
<7>  00000-9FFFF write-back
<7>  A0000-BFFFF uncachable
<7>  C0000-CFFFF write-protect
<7>  D0000-E3FFF uncachable
<7>  E4000-FFFFF write-protect
<7>MTRR variable ranges enabled:
<7>  0 base 00D0000000 mask 3FF0000000 uncachable
<7>  1 base 00E0000000 mask 3FE0000000 uncachable
<7>  2 base 0000000000 mask 3E00000000 write-back
<7>  3 base 0200000000 mask 3F80000000 write-back
<7>  4 base 0280000000 mask 3FE0000000 write-back
<7>  5 base 02A0000000 mask 3FF0000000 write-back
<7>  6 base 00CFF80000 mask 3FFFF80000 uncachable
<7>  7 disabled
<6>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
<7>e820 update range: 00000000cff80000 - 0000000100000000 (usable) ==> (reserved)
<6>last_pfn = 0xcfef0 max_arch_pfn = 0x400000000
<6>found SMP MP-table at [ffff8800000f68b0] f68b0
<7>initial memory mapped : 0 - 20000000
<6>init_memory_mapping: 0000000000000000-00000000cfef0000
<7> 0000000000 - 00cfe00000 page 2M
<7> 00cfe00000 - 00cfef0000 page 4k
<7>kernel direct mapping tables up to cfef0000 @ 1fffa000-20000000
<6>init_memory_mapping: 0000000100000000-00000002b0000000
<7> 0100000000 - 02b0000000 page 2M
<7>kernel direct mapping tables up to 2b0000000 @ cfee4000-cfef0000
<6>RAMDISK: 36e6f000 - 37ff0000
<6>Reserving 128MB of memory at 736MB for crashkernel (System RAM: 11008MB)
<4>ACPI: RSDP 00000000000f6880 00024 (v02 PTLTD )
<4>ACPI: XSDT 00000000cfefcef6 000D4 (v01 PTLTD  ? XSDT   06040000  LTP 00000000)
<4>ACPI: FACP 00000000cff033a8 000F4 (v03 INTEL  STOAKLEY 06040000 PTL  00000003)
<4>ACPI: DSDT 00000000cfefeab8 0487C (v01  Intel SEABURG  06040000 MSFT 03000001)
<4>ACPI: FACS 00000000cff04fc0 00040
<4>ACPI: _MAR 00000000cff0349c 00030 (v01 Intel  OEMDMAR  06040000 LOHR 00000001)
<4>ACPI: TCPA 00000000cff034cc 00032 (v01 Intel  STOAKLEY 06040000 LOHR 0000005A)
<4>ACPI: APIC 00000000cff034fe 000C8 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
<4>ACPI: MCFG 00000000cff035c6 0003C (v01 PTLTD    MCFG   06040000  LTP 00000000)
<4>ACPI: HPET 00000000cff03602 00038 (v01 PTLTD  HPETTBL  06040000  LTP 00000001)
<4>ACPI: BOOT 00000000cff0363a 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
<4>ACPI: SPCR 00000000cff03662 00050 (v01 PTLTD  $UCRTBL$ 06040000 PTL  00000001)
<4>ACPI: ERST 00000000cff036b2 00590 (v01 SMCI   ERSTTBL  06040000 SMCI 00000001)
<4>ACPI: HEST 00000000cff03c42 000A8 (v01 SMCI   HESTTBL  06040000 SMCI 00000001)
<4>ACPI: BERT 00000000cff03cea 00030 (v01 SMCI   BERTTBL  06040000 SMCI 00000001)
<4>ACPI: EINJ 00000000cff03d1a 00170 (v01 SMCI   EINJTBL  06040000 SMCI 00000001)
<4>ACPI: SLIC 00000000cff03e8a 00176 (v01 OEM_ID OEMTABLE 06040000  LTP 00000000)
<4>ACPI: SSDT 00000000cfefe859 0025F (v01  PmRef  Cpu0Tst 00003000 INTL 20050228)
<4>ACPI: SSDT 00000000cfefe7b3 000A6 (v01  PmRef  Cpu7Tst 00003000 INTL 20050228)
<4>ACPI: SSDT 00000000cfefe70d 000A6 (v01  PmRef  Cpu6Tst 00003000 INTL 20050228)
<4>ACPI: SSDT 00000000cfefe667 000A6 (v01  PmRef  Cpu5Tst 00003000 INTL 20050228)
<4>ACPI: SSDT 00000000cfefe5c1 000A6 (v01  PmRef  Cpu4Tst 00003000 INTL 20050228)
<4>ACPI: SSDT 00000000cfefe51b 000A6 (v01  PmRef  Cpu3Tst 00003000 INTL 20050228)
<4>ACPI: SSDT 00000000cfefe475 000A6 (v01  PmRef  Cpu2Tst 00003000 INTL 20050228)
<4>ACPI: SSDT 00000000cfefe3cf 000A6 (v01  PmRef  Cpu1Tst 00003000 INTL 20050228)
<4>ACPI: SSDT 00000000cfefcfca 01405 (v01  PmRef    CpuPm 00003000 INTL 20050228)
<7>ACPI: Local APIC address 0xfee00000
<6>No NUMA configuration found
<6>Faking a node at 0000000000000000-00000002b0000000
<6>Initmem setup node 0 0000000000000000-00000002b0000000
<6>  NODE_DATA [00000002affec000 - 00000002afffffff]
<7> [ffffea0000000000-ffffea00097fffff] PMD -> [ffff8802a5e00000-ffff8802aebfffff] on node 0
<4>Zone PFN ranges:
<4>  DMA      0x00000010 -> 0x00001000
<4>  DMA32    0x00001000 -> 0x00100000
<4>  Normal   0x00100000 -> 0x002b0000
<4>Movable zone start PFN for each node
<4>early_node_map[3] active PFN ranges
<4>    0: 0x00000010 -> 0x0000009d
<4>    0: 0x00000100 -> 0x000cfef0
<4>    0: 0x00100000 -> 0x002b0000
<7>On node 0 totalpages: 2621053
<7>  DMA zone: 56 pages used for memmap
<7>  DMA zone: 6 pages reserved
<7>  DMA zone: 3919 pages, LIFO batch:0
<7>  DMA32 zone: 14280 pages used for memmap
<7>  DMA32 zone: 833320 pages, LIFO batch:31
<7>  Normal zone: 24192 pages used for memmap
<7>  Normal zone: 1745280 pages, LIFO batch:31
<6>ACPI: PM-Timer IO Port: 0x1008
<7>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
<6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
<6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
<6>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
<6>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
<6>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x06] enabled)
<6>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
<6>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
<6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
<6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
<6>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
<6>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
<6>ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
<6>ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
<6>ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
<6>ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
<6>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
<6>IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
<6>ACPI: IOAPIC (id[0x09] address[0xfec89000] gsi_base[24])
<6>IOAPIC[1]: apic_id 9, version 32, address 0xfec89000, GSI 24-47
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<7>ACPI: IRQ0 used by override.
<7>ACPI: IRQ2 used by override.
<7>ACPI: IRQ9 used by override.
<6>Using ACPI (MADT) for SMP configuration information
<6>ACPI: HPET id: 0x8086a201 base: 0xfed00000
<6>SMP: Allowing 8 CPUs, 0 hotplug CPUs
<7>nr_irqs_gsi: 64
<6>PM: Registered nosave memory: 000000000009d000 - 000000000009e000
<6>PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
<6>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
<6>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
<6>PM: Registered nosave memory: 00000000cfef0000 - 00000000cff04000
<6>PM: Registered nosave memory: 00000000cff04000 - 00000000cff05000
<6>PM: Registered nosave memory: 00000000cff05000 - 00000000d0000000
<6>PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
<6>PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
<6>PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
<6>PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
<6>PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
<6>PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
<6>PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
<6>PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
<6>Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
<6>Booting paravirtualized kernel on bare hardware
<6>setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
<6>PERCPU: Embedded 26 pages/cpu @ffff8800cfc00000 s74944 r8192 d23360 u262144
<7>pcpu-alloc: s74944 r8192 d23360 u262144 alloc=1*2097152
<7>pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
<4>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2582519
<4>Policy zone: Normal
<5>Kernel command line: ro root=LABEL=/ rhgb quiet crashkernel=128M rd_NO_PLYMOUTH console=tty0 console=ttyS0,9600 LANG=en_US.UTF-8
<6>PID hash table entries: 4096 (order: 3, 32768 bytes)
<6>Checking aperture...
<6>No AGP bridge found
<7>Calgary: detecting Calgary via BIOS EBDA area
<7>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
<6>Memory: 10109856k/11272192k available (3940k kernel code, 787980k absent, 374356k reserved, 4719k data, 1276k init)
<6>SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
<6>Hierarchical RCU implementation.
<6>	RCU-based detection of stalled CPUs is disabled.
<6>NR_IRQS:4352 nr_irqs:1152 16
<6>Extended CMOS year: 2000
<4>Console: colour VGA+ 80x25
<6>console [tty0] enabled
<6>console [ttyS0] enabled
<6>allocated 104857600 bytes of page_cgroup
<6>please try 'cgroup_disable=memory' option if you don't want memory cgroups
<7>hpet clockevent registered
<4>Fast TSC calibration using PIT
<4>Detected 2500.305 MHz processor.
<6>Calibrating delay loop (skipped), value calculated using timer frequency.. 5000.61 BogoMIPS (lpj=10001220)
<6>pid_max: default: 32768 minimum: 301
<6>Security Framework initialized
<6>Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
<6>Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
<4>Mount-cache hash table entries: 256
<6>Initializing cgroup subsys cpuacct
<6>Initializing cgroup subsys memory
<6>Initializing cgroup subsys devices
<6>Initializing cgroup subsys freezer
<6>Initializing cgroup subsys blkio
<6>CPU: Physical Processor ID: 0
<6>CPU: Processor Core ID: 0
<6>mce: CPU supports 6 MCE banks
<6>CPU0: Thermal monitoring enabled (TM2)
<6>using mwait in idle threads.
<6>ACPI: Core revision 20110112
<6>Setting APIC routing to flat
<6>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
<6>CPU0: Intel(R) Xeon(R) CPU           E5420  @ 2.50GHz stepping 06
<6>Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
<6>... version:                2
<6>... bit width:              40
<6>... generic registers:      2
<6>... value mask:             000000ffffffffff
<6>... max period:             000000007fffffff
<6>... fixed-purpose events:   3
<6>... event mask:             0000000700000003
<6>NMI watchdog enabled, takes one hw-pmu counter.
<6>Booting Node   0, Processors  #1
<6>NMI watchdog enabled, takes one hw-pmu counter.
<4> #2
<6>NMI watchdog enabled, takes one hw-pmu counter.
<4> #3
<6>NMI watchdog enabled, takes one hw-pmu counter.
<4> #4
<6>NMI watchdog enabled, takes one hw-pmu counter.
<4> #5
<6>NMI watchdog enabled, takes one hw-pmu counter.
<4> #6
<6>NMI watchdog enabled, takes one hw-pmu counter.
<4> #7 Ok.
<6>NMI watchdog enabled, takes one hw-pmu counter.
<6>Brought up 8 CPUs
<6>Total of 8 processors activated (40002.02 BogoMIPS).
<6>NET: Registered protocol family 16
<6>ACPI: bus type pci registered
<6>PCI: MMCONFIG for domain 0000 [bus 00-09] at [mem 0xe0000000-0xe09fffff] (base 0xe0000000)
<6>PCI: MMCONFIG at [mem 0xe0000000-0xe09fffff] reserved in E820
<6>PCI: Using configuration type 1 for base access
<4>bio: create slab <bio-0> at 0
<7>ACPI: EC: Look up EC in DSDT
<7>\_SB_:_OSC evaluation returned wrong type
<7>_OSC request data:1 7 
<6>ACPI: Interpreter enabled
<6>ACPI: (supports S0 S1 S4 S5)
<6>ACPI: Using IOAPIC for interrupt routing
<6>ACPI: No dock devices found.
<6>HEST: Table parsing has been initialized.
<6>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
<6>pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
<6>pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
<6>pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
<6>pci_root PNP0A03:00: host bridge window [mem 0x000cc000-0x000cffff]
<6>pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff]
<6>pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff]
<6>pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff]
<6>pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff]
<6>pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff]
<7>pci 0000:00:00.0: [8086:4003] type 0 class 0x000600
<7>pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
<7>pci 0000:00:00.0: PME# disabled
<7>pci 0000:00:01.0: [8086:4021] type 1 class 0x000604
<7>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
<7>pci 0000:00:01.0: PME# disabled
<7>pci 0000:00:03.0: [8086:4023] type 1 class 0x000604
<7>pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
<7>pci 0000:00:03.0: PME# disabled
<7>pci 0000:00:05.0: [8086:4025] type 1 class 0x000604
<7>pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
<7>pci 0000:00:05.0: PME# disabled
<7>pci 0000:00:07.0: [8086:4027] type 1 class 0x000604
<7>pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<7>pci 0000:00:07.0: PME# disabled
<7>pci 0000:00:09.0: [8086:4029] type 1 class 0x000604
<7>pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
<7>pci 0000:00:09.0: PME# disabled
<7>pci 0000:00:0f.0: [8086:402f] type 0 class 0x000880
<7>pci 0000:00:0f.0: reg 10: [mem 0xfe700000-0xfe703fff 64bit]
<7>pci 0000:00:10.0: [8086:4030] type 0 class 0x000600
<7>pci 0000:00:10.1: [8086:4030] type 0 class 0x000600
<7>pci 0000:00:10.2: [8086:4030] type 0 class 0x000600
<7>pci 0000:00:10.3: [8086:4030] type 0 class 0x000600
<7>pci 0000:00:10.4: [8086:4030] type 0 class 0x000600
<7>pci 0000:00:11.0: [8086:4031] type 0 class 0x000600
<7>pci 0000:00:15.0: [8086:4035] type 0 class 0x000600
<7>pci 0000:00:15.1: [8086:4035] type 0 class 0x000600
<7>pci 0000:00:16.0: [8086:4036] type 0 class 0x000600
<7>pci 0000:00:16.1: [8086:4036] type 0 class 0x000600
<7>pci 0000:00:1d.0: [8086:2688] type 0 class 0x000c03
<7>pci 0000:00:1d.0: reg 20: [io  0x1800-0x181f]
<7>pci 0000:00:1d.1: [8086:2689] type 0 class 0x000c03
<7>pci 0000:00:1d.1: reg 20: [io  0x1820-0x183f]
<7>pci 0000:00:1d.2: [8086:268a] type 0 class 0x000c03
<7>pci 0000:00:1d.2: reg 20: [io  0x1840-0x185f]
<7>pci 0000:00:1d.3: [8086:268b] type 0 class 0x000c03
<7>pci 0000:00:1d.3: reg 20: [io  0x1860-0x187f]
<7>pci 0000:00:1d.7: [8086:268c] type 0 class 0x000c03
<7>pci 0000:00:1d.7: reg 10: [mem 0xdc904000-0xdc9043ff]
<7>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
<7>pci 0000:00:1d.7: PME# disabled
<7>pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
<7>pci 0000:00:1f.0: [8086:2670] type 0 class 0x000601
<7>pci 0000:00:1f.1: [8086:269e] type 0 class 0x000101
<7>pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
<7>pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
<7>pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
<7>pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
<7>pci 0000:00:1f.1: reg 20: [io  0x1880-0x188f]
<7>pci 0000:00:1f.2: [8086:2680] type 0 class 0x000101
<7>pci 0000:00:1f.2: reg 10: [io  0x18c0-0x18c7]
<7>pci 0000:00:1f.2: reg 14: [io  0x18b8-0x18bb]
<7>pci 0000:00:1f.2: reg 18: [io  0x18b0-0x18b7]
<7>pci 0000:00:1f.2: reg 1c: [io  0x1894-0x1897]
<7>pci 0000:00:1f.2: reg 20: [io  0x18a0-0x18af]
<7>pci 0000:00:1f.2: reg 24: [mem 0xdc904400-0xdc9047ff]
<7>pci 0000:00:1f.2: PME# supported from D3hot
<7>pci 0000:00:1f.2: PME# disabled
<7>pci 0000:00:1f.3: [8086:269b] type 0 class 0x000c05
<7>pci 0000:00:1f.3: reg 20: [io  0x1100-0x111f]
<6>pci 0000:00:01.0: PCI bridge to [bus 01-01]
<7>pci 0000:00:01.0:   bridge window [io  0xf000-0x0000] (disabled)
<7>pci 0000:00:01.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
<7>pci 0000:00:01.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
<7>pci 0000:02:00.0: [8086:3500] type 1 class 0x000604
<7>pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
<7>pci 0000:02:00.0: PME# disabled
<7>pci 0000:02:00.3: [8086:350c] type 1 class 0x000604
<7>pci 0000:02:00.3: PME# supported from D0 D3hot D3cold
<7>pci 0000:02:00.3: PME# disabled
<6>pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
<6>pci 0000:00:03.0: PCI bridge to [bus 02-05]
<7>pci 0000:00:03.0:   bridge window [io  0xf000-0x0000] (disabled)
<7>pci 0000:00:03.0:   bridge window [mem 0xdc500000-0xdc5fffff]
<7>pci 0000:00:03.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
<7>pci 0000:03:00.0: [8086:3510] type 1 class 0x000604
<7>pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
<7>pci 0000:03:00.0: PME# disabled
<6>pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
<6>pci 0000:02:00.0: PCI bridge to [bus 03-04]
<7>pci 0000:02:00.0:   bridge window [io  0xf000-0x0000] (disabled)
<7>pci 0000:02:00.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
<7>pci 0000:02:00.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
<6>pci 0000:03:00.0: PCI bridge to [bus 04-04]
<7>pci 0000:03:00.0:   bridge window [io  0xf000-0x0000] (disabled)
<7>pci 0000:03:00.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
<7>pci 0000:03:00.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
<6>pci 0000:02:00.3: PCI bridge to [bus 05-05]
<7>pci 0000:02:00.3:   bridge window [io  0xf000-0x0000] (disabled)
<7>pci 0000:02:00.3:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
<7>pci 0000:02:00.3:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
<7>pci 0000:06:00.0: [4040:0100] type 0 class 0x000200
<7>pci 0000:06:00.0: reg 10: [mem 0xdc000000-0xdc1fffff 64bit]
<7>pci 0000:06:00.0: reg 20: [mem 0xd8000000-0xd9ffffff 64bit]
<7>pci 0000:06:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
<7>pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
<7>pci 0000:06:00.0: PME# disabled
<7>pci 0000:06:00.1: [4040:0100] type 0 class 0x000200
<7>pci 0000:06:00.1: reg 10: [mem 0xdc200000-0xdc3fffff 64bit]
<7>pci 0000:06:00.1: reg 20: [mem 0xda000000-0xdbffffff 64bit]
<7>pci 0000:06:00.1: PME# supported from D0 D3hot D3cold
<7>pci 0000:06:00.1: PME# disabled
<6>pci 0000:00:05.0: PCI bridge to [bus 06-06]
<7>pci 0000:00:05.0:   bridge window [io  0xf000-0x0000] (disabled)
<7>pci 0000:00:05.0:   bridge window [mem 0xd8000000-0xdc3fffff]
<7>pci 0000:00:05.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
<6>pci 0000:00:07.0: PCI bridge to [bus 07-07]
<7>pci 0000:00:07.0:   bridge window [io  0xf000-0x0000] (disabled)
<7>pci 0000:00:07.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
<7>pci 0000:00:07.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
<7>pci 0000:08:00.0: [8086:10a7] type 0 class 0x000200
<7>pci 0000:08:00.0: reg 10: [mem 0xdc420000-0xdc43ffff]
<7>pci 0000:08:00.0: reg 14: [mem 0xdc400000-0xdc41ffff]
<7>pci 0000:08:00.0: reg 18: [io  0x2000-0x201f]
<7>pci 0000:08:00.0: reg 1c: [mem 0xdc480000-0xdc483fff]
<7>pci 0000:08:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
<7>pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
<7>pci 0000:08:00.0: PME# disabled
<7>pci 0000:08:00.1: [8086:10a7] type 0 class 0x000200
<7>pci 0000:08:00.1: reg 10: [mem 0xdc460000-0xdc47ffff]
<7>pci 0000:08:00.1: reg 14: [mem 0xdc440000-0xdc45ffff]
<7>pci 0000:08:00.1: reg 18: [io  0x2020-0x203f]
<7>pci 0000:08:00.1: reg 1c: [mem 0xdc484000-0xdc487fff]
<7>pci 0000:08:00.1: reg 30: [mem 0x00000000-0x0001ffff pref]
<7>pci 0000:08:00.1: PME# supported from D0 D3hot D3cold
<7>pci 0000:08:00.1: PME# disabled
<6>pci 0000:00:09.0: PCI bridge to [bus 08-08]
<7>pci 0000:00:09.0:   bridge window [io  0x2000-0x2fff]
<7>pci 0000:00:09.0:   bridge window [mem 0xdc400000-0xdc4fffff]
<7>pci 0000:00:09.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
<7>pci 0000:09:01.0: [1002:515e] type 0 class 0x000300
<7>pci 0000:09:01.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
<7>pci 0000:09:01.0: reg 14: [io  0x3000-0x30ff]
<7>pci 0000:09:01.0: reg 18: [mem 0xdc600000-0xdc60ffff]
<7>pci 0000:09:01.0: reg 30: [mem 0x00000000-0x0001ffff pref]
<7>pci 0000:09:01.0: supports D1 D2
<6>pci 0000:00:1e.0: PCI bridge to [bus 09-09] (subtractive decode)
<7>pci 0000:00:1e.0:   bridge window [io  0x3000-0x3fff]
<7>pci 0000:00:1e.0:   bridge window [mem 0xdc600000-0xdc6fffff]
<7>pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
<7>pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
<7>pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
<7>pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
<7>pci 0000:00:1e.0:   bridge window [mem 0x000cc000-0x000cffff] (subtractive decode)
<7>pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
<7>pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
<7>pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
<7>pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
<7>pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3.BMF0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3.BMF0.BPD0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
<6> pci0000:00: Requesting ACPI _OSC control (0x1d)
<6>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 14 15)
<6>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15)
<6>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15)
<6>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
<6>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15)
<6>ACPI: PCI Interrupt Link [LNKF] (IRQs 4 *5 6 7 10 11 14 15)
<6>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 14 15)
<6>ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 *11 14 15)
<6>vgaarb: device added: PCI:0000:09:01.0,decodes=io+mem,owns=io+mem,locks=none
<6>vgaarb: loaded
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>PCI: Using ACPI for IRQ routing
<7>PCI: pci_cache_line_size set to 64 bytes
<7>reserve RAM buffer: 000000000009dc00 - 000000000009ffff 
<7>reserve RAM buffer: 00000000cfef0000 - 00000000cfffffff 
<6>NetLabel: Initializing
<6>NetLabel:  domain hash size = 128
<6>NetLabel:  protocols = UNLABELED CIPSOv4
<6>NetLabel:  unlabeled traffic allowed by default
<6>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
<6>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
<6>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
<6>Switching to clocksource hpet
<6>pnp: PnP ACPI init
<6>ACPI: bus type pnp registered
<7>pnp 00:00: [bus 00-ff]
<7>pnp 00:00: [io  0x0000-0x0cf7 window]
<7>pnp 00:00: [io  0x0cf8-0x0cff]
<7>pnp 00:00: [io  0x0d00-0xffff window]
<7>pnp 00:00: [mem 0x000a0000-0x000bffff window]
<7>pnp 00:00: [mem 0x000c0000-0x000c3fff window]
<7>pnp 00:00: [mem 0x000c4000-0x000c7fff window]
<7>pnp 00:00: [mem 0x000c8000-0x000cbfff window]
<7>pnp 00:00: [mem 0x000cc000-0x000cffff window]
<7>pnp 00:00: [mem 0x000d0000-0x000d3fff window]
<7>pnp 00:00: [mem 0x000d4000-0x000d7fff window]
<7>pnp 00:00: [mem 0x000d8000-0x000dbfff window]
<7>pnp 00:00: [mem 0x000dc000-0x000dffff window]
<7>pnp 00:00: [mem 0x000e0000-0x000e3fff window]
<7>pnp 00:00: [mem 0x000e4000-0x000e7fff window]
<7>pnp 00:00: [mem 0x000e8000-0x000ebfff window]
<7>pnp 00:00: [mem 0x000ec000-0x000effff window]
<7>pnp 00:00: [mem 0xd0000000-0xfebfffff window]
<7>pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
<7>pnp 00:01: [io  0x0010-0x001f]
<7>pnp 00:01: [io  0x0024-0x0025]
<7>pnp 00:01: [io  0x0028-0x0029]
<7>pnp 00:01: [io  0x002c-0x002d]
<7>pnp 00:01: [io  0x002e-0x002f]
<7>pnp 00:01: [io  0x0030-0x0031]
<7>pnp 00:01: [io  0x0034-0x0035]
<7>pnp 00:01: [io  0x0038-0x0039]
<7>pnp 00:01: [io  0x003c-0x003d]
<7>pnp 00:01: [io  0x004e-0x004f]
<7>pnp 00:01: [io  0x0050-0x0053]
<7>pnp 00:01: [io  0x0063]
<7>pnp 00:01: [io  0x0065]
<7>pnp 00:01: [io  0x0067]
<7>pnp 00:01: [io  0x0072-0x0077]
<7>pnp 00:01: [io  0x0080]
<7>pnp 00:01: [io  0x0090-0x009f]
<7>pnp 00:01: [io  0x00a4-0x00a5]
<7>pnp 00:01: [io  0x00a8-0x00a9]
<7>pnp 00:01: [io  0x00ac-0x00ad]
<7>pnp 00:01: [io  0x00b0-0x00b5]
<7>pnp 00:01: [io  0x00b8-0x00b9]
<7>pnp 00:01: [io  0x00bc-0x00bd]
<7>pnp 00:01: [io  0x04d0-0x04d1]
<7>pnp 00:01: [io  0x0295-0x0296]
<7>pnp 00:01: [io  0x0ca2-0x0ca3]
<7>pnp 00:01: [io  0x0ca8-0x0caf]
<7>pnp 00:01: [io  0x0800-0x080f]
<7>pnp 00:01: [io  0x1000-0x107f]
<7>pnp 00:01: [io  0x1180-0x11bf]
<7>pnp 00:01: [io  0xfe00]
<7>pnp 00:01: [mem 0xe0000000-0xefffffff]
<7>pnp 00:01: [mem 0xfee00000-0xfee0ffff]
<7>pnp 00:01: [mem 0xfec89000-0xfec89fff]
<7>pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
<7>pnp 00:01: [mem 0xfe000000-0xfe01ffff]
<7>pnp 00:01: [mem 0xfe600000-0xfe6fffff]
<7>pnp 00:01: [mem 0xfed20000-0xfed44fff]
<7>pnp 00:01: [mem 0xfed45000-0xfed8ffff]
<6>system 00:01: [io  0x04d0-0x04d1] has been reserved
<6>system 00:01: [io  0x0295-0x0296] has been reserved
<6>system 00:01: [io  0x0ca2-0x0ca3] has been reserved
<6>system 00:01: [io  0x0ca8-0x0caf] has been reserved
<6>system 00:01: [io  0x0800-0x080f] has been reserved
<6>system 00:01: [io  0x1000-0x107f] has been reserved
<6>system 00:01: [io  0x1180-0x11bf] has been reserved
<6>system 00:01: [io  0xfe00] has been reserved
<6>system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
<6>system 00:01: [mem 0xfee00000-0xfee0ffff] could not be reserved
<6>system 00:01: [mem 0xfec89000-0xfec89fff] could not be reserved
<6>system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
<6>system 00:01: [mem 0xfe000000-0xfe01ffff] has been reserved
<6>system 00:01: [mem 0xfe600000-0xfe6fffff] has been reserved
<6>system 00:01: [mem 0xfed20000-0xfed44fff] has been reserved
<6>system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
<7>system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
<7>pnp 00:02: [io  0x0000-0x001f]
<7>pnp 00:02: [io  0x0081-0x0091]
<7>pnp 00:02: [io  0x0093-0x009f]
<7>pnp 00:02: [io  0x00c0-0x00df]
<7>pnp 00:02: [dma 4]
<7>pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
<7>pnp 00:03: [io  0x00f0-0x00fe]
<7>pnp 00:03: [irq 13]
<7>pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
<7>pnp 00:04: [irq 0 disabled]
<7>pnp 00:04: [irq 8]
<7>pnp 00:04: [mem 0xfed00000-0xfed003ff]
<7>pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
<7>pnp 00:05: [io  0x0070-0x0071]
<7>pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
<7>pnp 00:06: [io  0x0061]
<7>pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
<7>pnp 00:07: [mem 0xff000000-0xffffffff]
<7>pnp 00:07: Plug and Play ACPI device, IDs INT0800 (active)
<7>pnp 00:08: [io  0x0060]
<7>pnp 00:08: [io  0x0064]
<7>pnp 00:08: [irq 1]
<7>pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
<7>pnp 00:09: [irq 12]
<7>pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
<6>Switched to NOHz mode on CPU #0
<6>Switched to NOHz mode on CPU #1
<6>Switched to NOHz mode on CPU #3
<6>Switched to NOHz mode on CPU #4
<7>pnp 00:0a: [io  0x03f8-0x03ff]
<7>pnp 00:0a: [irq 4]
<6>Switched to NOHz mode on CPU #2
<6>Switched to NOHz mode on CPU #5
<6>Switched to NOHz mode on CPU #6
<6>Switched to NOHz mode on CPU #7
<7>pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
<7>pnp 00:0b: [io  0x02f8-0x02ff]
<7>pnp 00:0b: [irq 3]
<7>pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
<6>pnp: PnP ACPI: found 12 devices
<6>ACPI: ACPI bus type pnp unregistered
<6>pci 0000:00:05.0: BAR 15: assigned [mem 0xdc700000-0xdc7fffff pref]
<6>pci 0000:00:09.0: BAR 15: assigned [mem 0xdc800000-0xdc8fffff pref]
<6>pci 0000:00:01.0: PCI bridge to [bus 01-01]
<6>pci 0000:00:01.0:   bridge window [io  disabled]
<6>pci 0000:00:01.0:   bridge window [mem disabled]
<6>pci 0000:00:01.0:   bridge window [mem pref disabled]
<6>pci 0000:03:00.0: PCI bridge to [bus 04-04]
<6>pci 0000:03:00.0:   bridge window [io  disabled]
<6>pci 0000:03:00.0:   bridge window [mem disabled]
<6>pci 0000:03:00.0:   bridge window [mem pref disabled]
<6>pci 0000:02:00.0: PCI bridge to [bus 03-04]
<6>pci 0000:02:00.0:   bridge window [io  disabled]
<6>pci 0000:02:00.0:   bridge window [mem disabled]
<6>pci 0000:02:00.0:   bridge window [mem pref disabled]
<6>pci 0000:02:00.3: PCI bridge to [bus 05-05]
<6>pci 0000:02:00.3:   bridge window [io  disabled]
<6>pci 0000:02:00.3:   bridge window [mem disabled]
<6>pci 0000:02:00.3:   bridge window [mem pref disabled]
<6>pci 0000:00:03.0: PCI bridge to [bus 02-05]
<6>pci 0000:00:03.0:   bridge window [io  disabled]
<6>pci 0000:00:03.0:   bridge window [mem 0xdc500000-0xdc5fffff]
<6>pci 0000:00:03.0:   bridge window [mem pref disabled]
<6>pci 0000:06:00.0: BAR 6: assigned [mem 0xdc700000-0xdc70ffff pref]
<6>pci 0000:00:05.0: PCI bridge to [bus 06-06]
<6>pci 0000:00:05.0:   bridge window [io  disabled]
<6>pci 0000:00:05.0:   bridge window [mem 0xd8000000-0xdc3fffff]
<6>pci 0000:00:05.0:   bridge window [mem 0xdc700000-0xdc7fffff pref]
<6>pci 0000:00:07.0: PCI bridge to [bus 07-07]
<6>pci 0000:00:07.0:   bridge window [io  disabled]
<6>pci 0000:00:07.0:   bridge window [mem disabled]
<6>pci 0000:00:07.0:   bridge window [mem pref disabled]
<6>pci 0000:08:00.0: BAR 6: assigned [mem 0xdc800000-0xdc81ffff pref]
<6>pci 0000:08:00.1: BAR 6: assigned [mem 0xdc820000-0xdc83ffff pref]
<6>pci 0000:00:09.0: PCI bridge to [bus 08-08]
<6>pci 0000:00:09.0:   bridge window [io  0x2000-0x2fff]
<6>pci 0000:00:09.0:   bridge window [mem 0xdc400000-0xdc4fffff]
<6>pci 0000:00:09.0:   bridge window [mem 0xdc800000-0xdc8fffff pref]
<6>pci 0000:09:01.0: BAR 6: assigned [mem 0xdc620000-0xdc63ffff pref]
<6>pci 0000:00:1e.0: PCI bridge to [bus 09-09]
<6>pci 0000:00:1e.0:   bridge window [io  0x3000-0x3fff]
<6>pci 0000:00:1e.0:   bridge window [mem 0xdc600000-0xdc6fffff]
<6>pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
<6>pci 0000:00:01.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
<7>pci 0000:00:01.0: setting latency timer to 64
<6>pci 0000:00:03.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
<7>pci 0000:00:03.0: setting latency timer to 64
<6>pci 0000:02:00.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
<7>pci 0000:02:00.0: setting latency timer to 64
<6>pci 0000:03:00.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
<7>pci 0000:03:00.0: setting latency timer to 64
<7>pci 0000:02:00.3: setting latency timer to 64
<6>pci 0000:00:05.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
<7>pci 0000:00:05.0: setting latency timer to 64
<6>pci 0000:00:07.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
<7>pci 0000:00:07.0: setting latency timer to 64
<6>pci 0000:00:09.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
<7>pci 0000:00:09.0: setting latency timer to 64
<7>pci 0000:00:1e.0: setting latency timer to 64
<7>pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
<7>pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
<7>pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
<7>pci_bus 0000:00: resource 7 [mem 0x000cc000-0x000cffff]
<7>pci_bus 0000:00: resource 8 [mem 0x000d0000-0x000d3fff]
<7>pci_bus 0000:00: resource 9 [mem 0x000d4000-0x000d7fff]
<7>pci_bus 0000:00: resource 10 [mem 0x000d8000-0x000dbfff]
<7>pci_bus 0000:00: resource 11 [mem 0x000dc000-0x000dffff]
<7>pci_bus 0000:00: resource 12 [mem 0xd0000000-0xfebfffff]
<7>pci_bus 0000:02: resource 1 [mem 0xdc500000-0xdc5fffff]
<7>pci_bus 0000:06: resource 1 [mem 0xd8000000-0xdc3fffff]
<7>pci_bus 0000:06: resource 2 [mem 0xdc700000-0xdc7fffff pref]
<7>pci_bus 0000:08: resource 0 [io  0x2000-0x2fff]
<7>pci_bus 0000:08: resource 1 [mem 0xdc400000-0xdc4fffff]
<7>pci_bus 0000:08: resource 2 [mem 0xdc800000-0xdc8fffff pref]
<7>pci_bus 0000:09: resource 0 [io  0x3000-0x3fff]
<7>pci_bus 0000:09: resource 1 [mem 0xdc600000-0xdc6fffff]
<7>pci_bus 0000:09: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref]
<7>pci_bus 0000:09: resource 4 [io  0x0000-0x0cf7]
<7>pci_bus 0000:09: resource 5 [io  0x0d00-0xffff]
<7>pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff]
<7>pci_bus 0000:09: resource 7 [mem 0x000cc000-0x000cffff]
<7>pci_bus 0000:09: resource 8 [mem 0x000d0000-0x000d3fff]
<7>pci_bus 0000:09: resource 9 [mem 0x000d4000-0x000d7fff]
<7>pci_bus 0000:09: resource 10 [mem 0x000d8000-0x000dbfff]
<7>pci_bus 0000:09: resource 11 [mem 0x000dc000-0x000dffff]
<7>pci_bus 0000:09: resource 12 [mem 0xd0000000-0xfebfffff]
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
<6>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
<6>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
<6>TCP: Hash tables configured (established 524288 bind 65536)
<6>TCP reno registered
<6>UDP hash table entries: 8192 (order: 6, 262144 bytes)
<6>UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
<6>NET: Registered protocol family 1
<7>pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x1030
<7>pci 0000:00:1d.0: Performing full reset
<7>pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
<7>pci 0000:00:1d.1: Performing full reset
<7>pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
<7>pci 0000:00:1d.2: Performing full reset
<7>pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010
<7>pci 0000:00:1d.3: Performing full reset
<7>PCI: CLS mismatch (32 != 64), using 64 bytes
<6>pci 0000:08:00.0: Disabling L0s
<6>pci 0000:08:00.1: Disabling L0s
<7>pci 0000:09:01.0: Boot video device
<6>Trying to unpack rootfs image as initramfs...
<6>Freeing initrd memory: 17924k freed
<6>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>Placing 64MB software IO TLB between ffff8800cbc00000 - ffff8800cfc00000
<6>software IO TLB at phys 0xcbc00000 - 0xcfc00000
<6>Simple Boot Flag at 0x41 set to 0x80
<6>audit: initializing netlink socket (disabled)
<5>type=2000 audit(1297661245.160:1): initialized
<6>HugeTLB registered 2 MB page size, pre-allocated 0 pages
<5>VFS: Disk quotas dquot_6.5.2
<4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>msgmni has been set to 19780
<4>cryptomgr_test used greatest stack depth: 7112 bytes left
<4>cryptomgr_test used greatest stack depth: 6856 bytes left
<6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
<6>io scheduler noop registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
<7>intel_idle: MWAIT substates: 0x2220
<7>intel_idle: does not run on family 6 model 23
<6>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0C:00/input/input0
<6>ACPI: Power Button [PWRB]
<6>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
<6>ACPI: Power Button [PWRF]
<7>ACPI: acpi_idle registered with cpuidle
<6>ERST: Error Record Serialization Table (ERST) support is initialized.
<6>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
<6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>Non-volatile memory driver v1.3
<6>Linux agpgart interface v0.103
<6>brd: module loaded
<7>ata_piix 0000:00:1f.1: version 2.13
<6>ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
<7>ata_piix 0000:00:1f.1: setting latency timer to 64
<6>scsi0 : ata_piix
<6>scsi1 : ata_piix
<6>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
<6>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
<6>ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
<6>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
<7>ata2: port disabled. ignoring.
<6>Refined TSC clocksource calibration: 2500.088 MHz.
<6>Switching to clocksource tsc
<7>ata_piix 0000:00:1f.2: setting latency timer to 64
<6>scsi2 : ata_piix
<6>scsi3 : ata_piix
<6>ata3: SATA max UDMA/133 cmd 0x18c0 ctl 0x18b8 bmdma 0x18a0 irq 17
<6>ata4: SATA max UDMA/133 cmd 0x18b0 ctl 0x1894 bmdma 0x18a8 irq 17
<6>ata1.01: ATAPI: DVD-ROM UJDA780, 1.50, max UDMA/33
<6>i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
<6>ata1.01: configured for UDMA/33
<5>scsi 0:0:1:0: CD-ROM            MATSHITA DVD-ROM UJDA780  1.50 PQ: 0 ANSI: 5
<6>ata3.00: ATA-7: WDC WD2500JS-60NCB2, 10.02E03, max UDMA/100
<6>ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
<6>ata3.00: configured for UDMA/100
<5>scsi 2:0:0:0: Direct-Access     ATA      WDC WD2500JS-60N 10.0 PQ: 0 ANSI: 5
<5>sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
<5>sd 2:0:0:0: [sda] Write Protect is off
<7>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6> sda: sda1 sda2 sda3
<5>sd 2:0:0:0: [sda] Attached SCSI disk
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>mousedev: PS/2 mouse device common for all mice
<6>rtc_cmos 00:05: RTC can wake from S4
<6>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
<6>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
<6>cpuidle: using governor ladder
<6>cpuidle: using governor menu
<6>usbcore: registered new interface driver usbhid
<6>usbhid: USB HID core driver
<6>TCP cubic registered
<6>Initializing XFRM netlink socket
<6>NET: Registered protocol family 17
<5>Registering the dns_resolver key type
<7>PM: Hibernation image not present or could not be loaded.
<4>registered taskstats version 1
<6>Freeing unused kernel memory: 1276k freed
<6>Write protecting the kernel read-only data: 8192k
<6>Freeing unused kernel memory: 140k freed
<6>Freeing unused kernel memory: 2008k freed
<4>mknod used greatest stack depth: 5728 bytes left
<4>modprobe used greatest stack depth: 5504 bytes left
<6>dracut: dracut-006-6.fc14
<6>device-mapper: uevent: version 1.0.3
<6>device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
<6>udev[122]: starting version 161
<4>modprobe used greatest stack depth: 5088 bytes left
<6>uhci_hcd: USB Universal Host Controller Interface driver
<6>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
<7>uhci_hcd 0000:00:1d.0: setting latency timer to 64
<6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
<7>drivers/usb/core/inode.c: creating file 'devices'
<7>drivers/usb/core/inode.c: creating file '001'
<6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<4>Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
<7>ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
<6>QLogic/NetXen Network Driver v4.0.75
<4>netxen_nic: chip revisions between 0x30-0x41 will not be enabled.
<4>netxen_nic: chip revisions between 0x30-0x41 will not be enabled.
<6>Intel(R) Gigabit Ethernet Network Driver - version 2.1.0-k2
<6>Copyright (c) 2007-2009 Intel Corporation.
<6>igb 0000:08:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
<7>igb 0000:08:00.0: setting latency timer to 64
<7>igb 0000:08:00.0: irq 64 for MSI/MSI-X
<7>igb 0000:08:00.0: irq 65 for MSI/MSI-X
<7>igb 0000:08:00.0: irq 66 for MSI/MSI-X
<7>igb 0000:08:00.0: irq 67 for MSI/MSI-X
<7>igb 0000:08:00.0: irq 68 for MSI/MSI-X
<7>igb 0000:08:00.0: irq 69 for MSI/MSI-X
<7>igb 0000:08:00.0: irq 70 for MSI/MSI-X
<7>igb 0000:08:00.0: irq 71 for MSI/MSI-X
<7>igb 0000:08:00.0: irq 72 for MSI/MSI-X
<4>sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
<6>cdrom: Uniform CD-ROM driver Revision: 3.20
<7>sr 0:0:1:0: Attached scsi CD-ROM sr0
<6>uhci_hcd 0000:00:1d.0: detected 2 ports
<7>uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
<7>uhci_hcd 0000:00:1d.0: Performing full reset
<7>uhci_hcd 0000:00:1d.0: supports USB remote wakeup
<6>uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001800
<7>usb usb1: default language 0x0409
<7>usb usb1: udev 1, busnum 1, minor = 0
<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: UHCI Host Controller
<6>usb usb1: Manufacturer: Linux 2.6.38-rc4-357643.2010AroraKernelBeta.fc14.x86_64 uhci_hcd
<6>usb usb1: SerialNumber: 0000:00:1d.0
<7>usb usb1: usb_probe_device
<7>usb usb1: configuration #1 chosen from 1 choice
<7>usb usb1: adding 1-0:1.0 (config #1, interface 0)
<7>hub 1-0:1.0: usb_probe_interface
<7>hub 1-0:1.0: usb_probe_interface - got id
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 2 ports detected
<7>hub 1-0:1.0: standalone hub
<7>hub 1-0:1.0: no power switching (usb 1.0)
<7>hub 1-0:1.0: individual port over-current protection
<7>hub 1-0:1.0: power on to power good time: 2ms
<7>hub 1-0:1.0: local power source is good
<7>hub 1-0:1.0: trying to enable port power on non-switchable hub
<7>drivers/usb/core/inode.c: creating file '001'
<6>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
<7>uhci_hcd 0000:00:1d.1: setting latency timer to 64
<6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
<7>drivers/usb/core/inode.c: creating file '002'
<6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
<4>cdrom_id used greatest stack depth: 4720 bytes left
<6>[drm] Initialized drm 1.1.0 20060810
<6>[drm] radeon defaulting to kernel modesetting.
<6>[drm] radeon kernel modesetting enabled.
<6>radeon 0000:09:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
<6>[drm] initializing kernel modesetting (RV100 0x1002:0x515E).
<6>[drm] register mmio base: 0xDC600000
<6>[drm] register mmio size: 65536
<6>radeon 0000:09:01.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (32M used)
<6>radeon 0000:09:01.0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF
<6>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
<6>[drm] Driver supports precise vblank timestamp query.
<6>[drm] radeon: irq initialized.
<4>mtrr: type mismatch for d0000000,8000000 old: write-back new: write-combining
<6>[drm] Detected VRAM RAM=128M, BAR=128M
<6>[drm] RAM width 16bits DDR
<6>[TTM] Zone  kernel: Available graphics memory: 5065602 kiB.
<6>[TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
<6>[TTM] Initializing pool allocator.
<6>[drm] radeon: 32M of VRAM memory ready
<6>[drm] radeon: 512M of GTT memory ready.
<6>[drm] GART: num cpu pages 131072, num gpu pages 131072
<6>uhci_hcd 0000:00:1d.1: detected 2 ports
<7>uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
<7>uhci_hcd 0000:00:1d.1: Performing full reset
<7>uhci_hcd 0000:00:1d.1: supports USB remote wakeup
<6>uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820
<7>usb usb2: default language 0x0409
<7>usb usb2: udev 1, busnum 2, minor = 128
<6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb2: Product: UHCI Host Controller
<6>usb usb2: Manufacturer: Linux 2.6.38-rc4-357643.2010AroraKernelBeta.fc14.x86_64 uhci_hcd
<6>usb usb2: SerialNumber: 0000:00:1d.1
<7>usb usb2: usb_probe_device
<7>usb usb2: configuration #1 chosen from 1 choice
<7>usb usb2: adding 2-0:1.0 (config #1, interface 0)
<7>hub 2-0:1.0: usb_probe_interface
<7>hub 2-0:1.0: usb_probe_interface - got id
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<7>hub 2-0:1.0: standalone hub
<7>hub 2-0:1.0: no power switching (usb 1.0)
<7>hub 2-0:1.0: individual port over-current protection
<7>hub 2-0:1.0: power on to power good time: 2ms
<7>hub 2-0:1.0: local power source is good
<7>hub 2-0:1.0: trying to enable port power on non-switchable hub
<7>drivers/usb/core/inode.c: creating file '001'
<6>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
<7>uhci_hcd 0000:00:1d.2: setting latency timer to 64
<6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
<7>drivers/usb/core/inode.c: creating file '003'
<6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
<6>radeon 0000:09:01.0: WB enabled
<6>[drm] Loading R100 Microcode
<6>[drm] radeon: ring at 0x00000000B0001000
<6>[drm] ring test succeeded in 3 usecs
<6>[drm] radeon: ib pool ready.
<6>[drm] ib test succeeded in 0 usecs
<6>[drm] No TV DAC info found in BIOS
<6>[drm] No valid Ext TMDS info found in BIOS
<6>[drm] Radeon Display Connectors
<6>[drm] Connector 0:
<6>[drm]   VGA
<6>[drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
<6>[drm]   Encoders:
<6>[drm]     CRT1: INTERNAL_DAC1
<6>[drm] Connector 1:
<6>[drm]   DVI-I
<6>[drm]   HPD2
<6>[drm]   DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c
<6>[drm]   Encoders:
<6>[drm]     CRT2: INTERNAL_DAC2
<6>[drm]     DFP2: INTERNAL_DVO1
<6>uhci_hcd 0000:00:1d.2: detected 2 ports
<7>uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
<7>uhci_hcd 0000:00:1d.2: Performing full reset
<7>uhci_hcd 0000:00:1d.2: supports USB remote wakeup
<6>uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840
<7>usb usb3: default language 0x0409
<7>usb usb3: udev 1, busnum 3, minor = 256
<6>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb3: Product: UHCI Host Controller
<6>usb usb3: Manufacturer: Linux 2.6.38-rc4-357643.2010AroraKernelBeta.fc14.x86_64 uhci_hcd
<6>usb usb3: SerialNumber: 0000:00:1d.2
<7>usb usb3: usb_probe_device
<7>usb usb3: configuration #1 chosen from 1 choice
<7>usb usb3: adding 3-0:1.0 (config #1, interface 0)
<7>hub 3-0:1.0: usb_probe_interface
<7>hub 3-0:1.0: usb_probe_interface - got id
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 2 ports detected
<7>hub 3-0:1.0: standalone hub
<7>hub 3-0:1.0: no power switching (usb 1.0)
<7>hub 3-0:1.0: individual port over-current protection
<7>hub 3-0:1.0: power on to power good time: 2ms
<7>hub 3-0:1.0: local power source is good
<7>hub 3-0:1.0: trying to enable port power on non-switchable hub
<7>drivers/usb/core/inode.c: creating file '001'
<6>uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
<7>uhci_hcd 0000:00:1d.3: setting latency timer to 64
<6>uhci_hcd 0000:00:1d.3: UHCI Host Controller
<7>drivers/usb/core/inode.c: creating file '004'
<6>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
<7>hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000
<6>[drm] fb mappable at 0xD0040000
<6>[drm] vram apper at 0xD0000000
<6>[drm] size 786432
<6>[drm] fb depth is 8
<6>[drm]    pitch is 1024
<6>fbcon: radeondrmfb (fb0) is primary device
<7>hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
<7>hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
<6>igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection
<6>igb 0000:08:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:30:48:64:a0:bc
<6>igb 0000:08:00.0: eth0: PBA No: FFFFFF-0FF
<6>igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
<6>igb 0000:08:00.1: PCI INT B -> GSI 46 (level, low) -> IRQ 46
<7>igb 0000:08:00.1: setting latency timer to 64
<7>igb 0000:08:00.1: irq 73 for MSI/MSI-X
<7>igb 0000:08:00.1: irq 74 for MSI/MSI-X
<7>igb 0000:08:00.1: irq 75 for MSI/MSI-X
<7>igb 0000:08:00.1: irq 76 for MSI/MSI-X
<7>igb 0000:08:00.1: irq 77 for MSI/MSI-X
<7>igb 0000:08:00.1: irq 78 for MSI/MSI-X
<7>igb 0000:08:00.1: irq 79 for MSI/MSI-X
<7>igb 0000:08:00.1: irq 80 for MSI/MSI-X
<7>igb 0000:08:00.1: irq 81 for MSI/MSI-X
<4>Console: switching to colour frame buffer device 128x48
<6>fb0: radeondrmfb frame buffer device
<6>drm: registered panic notifier
<6>[drm] Initialized radeon 2.8.0 20080528 for 0000:09:01.0 on minor 0
<4>modprobe used greatest stack depth: 4288 bytes left
<6>uhci_hcd 0000:00:1d.3: detected 2 ports
<7>uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
<7>uhci_hcd 0000:00:1d.3: Performing full reset
<6>uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001860
<7>usb usb4: default language 0x0409
<7>usb usb4: udev 1, busnum 4, minor = 384
<6>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb4: Product: UHCI Host Controller
<6>usb usb4: Manufacturer: Linux 2.6.38-rc4-357643.2010AroraKernelBeta.fc14.x86_64 uhci_hcd
<6>usb usb4: SerialNumber: 0000:00:1d.3
<7>usb usb4: usb_probe_device
<7>usb usb4: configuration #1 chosen from 1 choice
<7>usb usb4: adding 4-0:1.0 (config #1, interface 0)
<7>hub 4-0:1.0: usb_probe_interface
<7>hub 4-0:1.0: usb_probe_interface - got id
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 2 ports detected
<7>hub 4-0:1.0: standalone hub
<7>hub 4-0:1.0: no power switching (usb 1.0)
<7>hub 4-0:1.0: individual port over-current protection
<7>hub 4-0:1.0: power on to power good time: 2ms
<7>hub 4-0:1.0: local power source is good
<7>hub 4-0:1.0: trying to enable port power on non-switchable hub
<7>drivers/usb/core/inode.c: creating file '001'
<6>ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
<7>ehci_hcd 0000:00:1d.7: setting latency timer to 64
<6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
<7>drivers/usb/core/inode.c: creating file '005'
<6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
<7>ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
<7>ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
<6>ehci_hcd 0000:00:1d.7: debug port 1
<7>ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
<7>ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
<7>ehci_hcd 0000:00:1d.7: supports USB remote wakeup
<6>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdc904000
<7>ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
<7>ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
<6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
<7>usb usb5: default language 0x0409
<7>usb usb5: udev 1, busnum 5, minor = 512
<6>usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
<6>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb5: Product: EHCI Host Controller
<6>usb usb5: Manufacturer: Linux 2.6.38-rc4-357643.2010AroraKernelBeta.fc14.x86_64 ehci_hcd
<6>usb usb5: SerialNumber: 0000:00:1d.7
<7>usb usb5: usb_probe_device
<7>usb usb5: configuration #1 chosen from 1 choice
<7>usb usb5: adding 5-0:1.0 (config #1, interface 0)
<7>hub 5-0:1.0: usb_probe_interface
<7>hub 5-0:1.0: usb_probe_interface - got id
<6>hub 5-0:1.0: USB hub found
<6>hub 5-0:1.0: 8 ports detected
<7>hub 5-0:1.0: standalone hub
<7>hub 5-0:1.0: no power switching (usb 1.0)
<7>hub 5-0:1.0: individual port over-current protection
<7>hub 5-0:1.0: power on to power good time: 20ms
<7>hub 5-0:1.0: local power source is good
<7>hub 5-0:1.0: trying to enable port power on non-switchable hub
<7>drivers/usb/core/inode.c: creating file '001'
<7>ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0
<7>ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1
<7>ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2
<7>ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.3
<7>hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
<7>hub 5-0:1.0: state 7 ports 8 chg 0000 evt 0000
<6>igb 0000:08:00.1: Intel(R) Gigabit Ethernet Network Connection
<6>igb 0000:08:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:30:48:64:a0:bd
<6>igb 0000:08:00.1: eth1: PBA No: FFFFFF-0FF
<6>igb 0000:08:00.1: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
<6>EXT3-fs (sda1): recovery required on readonly filesystem
<6>EXT3-fs (sda1): write access will be enabled during recovery
<6>EXT3-fs: barriers not enabled
<7>usb usb1: suspend_rh (auto-stop)
<7>usb usb2: suspend_rh (auto-stop)
<7>usb usb3: suspend_rh (auto-stop)
<7>usb usb4: suspend_rh (auto-stop)
<7>hub 1-0:1.0: hub_suspend
<7>usb usb1: bus auto-suspend
<7>usb usb1: suspend_rh
<7>hub 2-0:1.0: hub_suspend
<7>usb usb2: bus auto-suspend
<7>usb usb2: suspend_rh
<7>hub 3-0:1.0: hub_suspend
<7>usb usb3: bus auto-suspend
<7>usb usb3: suspend_rh
<7>hub 4-0:1.0: hub_suspend
<7>usb usb4: bus auto-suspend
<7>usb usb4: suspend_rh
<7>hub 5-0:1.0: hub_suspend
<7>usb usb5: bus auto-suspend
<7>ehci_hcd 0000:00:1d.7: suspend root hub
<6>kjournald starting.  Commit interval 5 seconds
<6>EXT3-fs (sda1): recovery complete
<6>EXT3-fs (sda1): mounted filesystem with ordered data mode
<6>dracut: Mounted root filesystem /dev/sda1
<6>dracut: Loading SELinux policy
<4>load_policy used greatest stack depth: 3872 bytes left
<6>dracut: /sbin/load_policy: Can't load policy: No such device
<6>dracut: Switching root
<6>udev[345]: starting version 161
<4>modprobe used greatest stack depth: 3664 bytes left
<5>sr 0:0:1:0: Attached scsi generic sg0 type 5
<5>sd 2:0:0:0: Attached scsi generic sg1 type 0
<6>microcode: CPU0 sig=0x10676, pf=0x40, revision=0x60b
<6>input: PC Speaker as /devices/platform/pcspkr/input/input2
<6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<5>intel_rng: FWH not detected
<6>dca service started, version 1.12.1
<6>microcode: CPU1 sig=0x10676, pf=0x40, revision=0x60b
<6>microcode: CPU2 sig=0x10676, pf=0x40, revision=0x60b
<6>microcode: CPU3 sig=0x10676, pf=0x40, revision=0x60b
<6>microcode: CPU4 sig=0x10676, pf=0x40, revision=0x60b
<6>microcode: CPU5 sig=0x10676, pf=0x40, revision=0x60b
<6>microcode: CPU6 sig=0x10676, pf=0x40, revision=0x60b
<6>microcode: CPU7 sig=0x10676, pf=0x40, revision=0x60b
<6>microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
<6>ioatdma: Intel(R) QuickData Technology Driver 4.00
<6>ioatdma 0000:00:0f.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33
<7>ioatdma 0000:00:0f.0: setting latency timer to 64
<3>ioatdma 0000:00:0f.0: channel enumeration error
<4>hpet1: lost 1 rtc interrupts
<6>EDAC MC: Ver: 2.1.0 Feb 13 2011
<3>ioatdma 0000:00:0f.0: Intel(R) I/OAT DMA Engine init failed
<6>ioatdma 0000:00:0f.0: PCI INT A disabled
<6>i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
<6>iTCO_vendor_support: vendor-support=0
<6>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
<6>iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0x1060)
<6>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
<6>EDAC MC0: Giving out device to 'i5400_edac.c' 'I5400': DEV 0000:00:10.0
<6>EDAC PCI0: Giving out device to module 'i5400_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED)
<6>microcode: CPU0 updated to revision 0x60f, date = 2010-09-29
<6>microcode: CPU1 updated to revision 0x60f, date = 2010-09-29
<6>microcode: CPU2 updated to revision 0x60f, date = 2010-09-29
<6>microcode: CPU3 updated to revision 0x60f, date = 2010-09-29
<6>microcode: CPU4 updated to revision 0x60f, date = 2010-09-29
<6>microcode: CPU5 updated to revision 0x60f, date = 2010-09-29
<6>microcode: CPU6 updated to revision 0x60f, date = 2010-09-29
<6>microcode: CPU7 updated to revision 0x60f, date = 2010-09-29
<6>802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
<6>All bugs added by David S. Miller <davem@redhat.com>
<6>tun: Universal TUN/TAP device driver, 1.6
<6>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
<6>ip_tables: (C) 2000-2006 Netfilter Core Team
<6>fuse init (API version 7.16)
<6>has_svm: not amd
<3>kvm: no hardware support
<6>NET: Registered protocol family 10
<6>bonding: Ethernet Channel Bonding Driver: v3.7.0 (June 2, 2010)
<6>bonding: MII link monitoring set to 100 ms
<6>EXT3-fs (sda1): using internal journal
<4>EXT4-fs (sda3): Ignoring deprecated nobh option
<6>EXT4-fs (sda3): mounted filesystem with writeback data mode. Opts: data=writeback,nobh
<6>Adding 1951892k swap on /dev/sda2.  Priority:-1 extents:1 across:1951892k 
<6>8021q: adding VLAN 0 to HW filter on device bond0
<6>ADDRCONF(NETDEV_UP): bond0: link is not ready
<6>bonding: bond0: Adding slave eth0.
<6>8021q: adding VLAN 0 to HW filter on device eth0
<6>bonding: bond0: enslaving eth0 as a backup interface with a down link.
<6>bonding: bond0: Adding slave eth1.
<6>8021q: adding VLAN 0 to HW filter on device eth1
<6>bonding: bond0: enslaving eth1 as a backup interface with a down link.
<6>igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
<6>bonding: bond0: link status definitely up for interface eth0, 1000 Mbps full duplex.
<6>ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
<7>bond0: no IPv6 routers present
<6>RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
<6>RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
<4>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
<6>NFSD: starting 90-second grace period
<4>sshd (5792): /proc/5792/oom_adj is deprecated, please use /proc/5792/oom_score_adj instead.
<6>device bond0 entered promiscuous mode
<6>device eth0 entered promiscuous mode
<6>device eth1 entered promiscuous mode
<7>qnet0: no IPv6 routers present
<7>qnet1: no IPv6 routers present
<7>qnet0: no IPv6 routers present
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth2: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth3: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth4: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth4: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth2: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth3: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
<6>lt-LinkQueueTes[27642]: segfault at 5 ip 00000000f76dd26a sp 00000000ff8a3038 error 4 in libtacC.so.0.0.0[f76c1000+41000]
<6>lt-HashMapItera[28691]: segfault at 0 ip 00000000f770c4c7 sp 00000000fffad654 error 4 in libtacC.so.0.0.0[f76f0000+41000]
<6>lt-HashMapItera[28692]: segfault at 0 ip 00000000f770c731 sp 00000000fffad660 error 4 in libtacC.so.0.0.0[f76f0000+41000]
<6>lt-LinkQueueIte[30373]: segfault at 0 ip 00000000f7770814 sp 00000000ffa64f2c error 4 in libtacC.so.0.0.0[f7755000+41000]
<6>lt-LinkQueueIte[30374]: segfault at 0 ip 00000000f777082d sp 00000000ffa64f2c error 4 in libtacC.so.0.0.0[f7755000+41000]
<6>device rtnmTest entered promiscuous mode
<6>device rtnmTest left promiscuous mode
<7>tap2690-2: no IPv6 routers present
<7>tap2690-1: no IPv6 routers present
<6>Linux Tulip driver version 1.1.15 (Feb 27, 2007)
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>lt-LinkQueueTes[5781]: segfault at 5 ip 00000000f778426a sp 00000000ffe2d618 error 4 in libtacC.so.0.0.0[f7768000+41000]
<6>lt-HashMapItera[6723]: segfault at 0 ip 00000000f77824c7 sp 00000000ffc3b004 error 4 in libtacC.so.0.0.0[f7766000+41000]
<6>lt-HashMapItera[6725]: segfault at 0 ip 00000000f7782731 sp 00000000ffc3b010 error 4 in libtacC.so.0.0.0[f7766000+41000]
<6>lt-LinkQueueIte[6822]: segfault at 0 ip 00000000f76f0814 sp 00000000ffee588c error 4 in libtacC.so.0.0.0[f76d5000+41000]
<6>lt-LinkQueueIte[6824]: segfault at 0 ip 00000000f76f082d sp 00000000ffee588c error 4 in libtacC.so.0.0.0[f76d5000+41000]
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>ADDRCONF(NETDEV_UP): v1a: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): v1a: link becomes ready
<6>ADDRCONF(NETDEV_UP): v2a: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): v2a: link becomes ready
<6>ADDRCONF(NETDEV_CHANGE): v1a: link becomes ready
<6>ADDRCONF(NETDEV_UP): v1a: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): v1a: link becomes ready
<6>ADDRCONF(NETDEV_UP): v2a: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): v2a: link becomes ready
<6>ADDRCONF(NETDEV_CHANGE): v1a: link becomes ready
<7>v2b: no IPv6 routers present
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth2: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth3: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth4: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth4: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth5: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth5: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth2: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth3: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth4: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth4: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth5: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth5: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth2: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth3: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth4: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth4: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth5: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth5: link becomes ready
<6>ADDRCONF(NETDEV_UP): e12: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): e12: link becomes ready
<6>ADDRCONF(NETDEV_UP): e1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): e1: link becomes ready
<6>lt-LinkQueueTes[26385]: segfault at 5 ip 00000000f777f26a sp 00000000ffc82228 error 4 in libtacC.so.0.0.0[f7763000+41000]
<6>lt-HashMapItera[26766]: segfault at 0 ip 00000000f76ca4c7 sp 00000000ffd1c034 error 4 in libtacC.so.0.0.0[f76ae000+41000]
<6>lt-HashMapItera[26769]: segfault at 0 ip 00000000f76ca731 sp 00000000ffd1c040 error 4 in libtacC.so.0.0.0[f76ae000+41000]
<6>lt-LinkQueueIte[26832]: segfault at 0 ip 00000000f776a814 sp 00000000ff98c18c error 4 in libtacC.so.0.0.0[f774f000+41000]
<6>lt-LinkQueueIte[26835]: segfault at 0 ip 00000000f776a82d sp 00000000ff98c18c error 4 in libtacC.so.0.0.0[f774f000+41000]
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<6>device lo entered promiscuous mode
<6>device lo left promiscuous mode
<4>modprobe used greatest stack depth: 3648 bytes left
<6>device etba1-et8 entered promiscuous mode
<6>device etba1-et9 entered promiscuous mode
<6>device etba1-et2 entered promiscuous mode
<6>device etba1-et3 entered promiscuous mode
<6>device etba1-et1 entered promiscuous mode
<6>device etba1-et6 entered promiscuous mode
<6>device etba1-et7 entered promiscuous mode
<6>device etba1-et4 entered promiscuous mode
<6>device etba1-et5 entered promiscuous mode
<6>device etba1-et21 entered promiscuous mode
<6>device etba1-et15 entered promiscuous mode
<6>device etba1-et16 entered promiscuous mode
<6>device etba1-et22 entered promiscuous mode
<6>device etba1-et24 entered promiscuous mode
<6>device etba1-et18 entered promiscuous mode
<6>device etba1-et19 entered promiscuous mode
<6>device etba1-et14 entered promiscuous mode
<6>device etba1-et20 entered promiscuous mode
<6>device etba1-et23 entered promiscuous mode
<6>device etba1-et17 entered promiscuous mode
<6>device etba1-et10 entered promiscuous mode
<6>device etba1-et11 entered promiscuous mode
<6>device etba1-et12 entered promiscuous mode
<6>device etba1-et13 entered promiscuous mode
<6>device etba1-et8 left promiscuous mode
<6>device etba1-et9 left promiscuous mode
<6>device etba1-et2 left promiscuous mode
<6>device etba1-et3 left promiscuous mode
<6>device etba1-et1 left promiscuous mode
<6>device etba1-et6 left promiscuous mode
<6>device etba1-et7 left promiscuous mode
<6>device etba1-et4 left promiscuous mode
<6>device etba1-et5 left promiscuous mode
<6>device etba1-et14 left promiscuous mode
<6>device etba1-et15 left promiscuous mode
<6>device etba1-et23 left promiscuous mode
<6>device etba1-et17 left promiscuous mode
<6>device etba1-et24 left promiscuous mode
<6>device etba1-et18 left promiscuous mode
<6>device etba1-et19 left promiscuous mode
<6>device etba1-et21 left promiscuous mode
<6>device etba1-et20 left promiscuous mode
<6>device etba1-et16 left promiscuous mode
<6>device etba1-et22 left promiscuous mode
<6>device etba1-et10 left promiscuous mode
<6>device etba1-et11 left promiscuous mode
<6>device etba1-et12 left promiscuous mode
<6>device etba1-et13 left promiscuous mode
<6>device etba1-et8 entered promiscuous mode
<6>device etba1-et9 entered promiscuous mode
<6>device etba1-et2 entered promiscuous mode
<6>device etba1-et3 entered promiscuous mode
<6>device etba1-et1 entered promiscuous mode
<6>device etba1-et6 entered promiscuous mode
<6>device etba1-et7 entered promiscuous mode
<6>device etba1-et4 entered promiscuous mode
<6>device etba1-et5 entered promiscuous mode
<6>device etba1-et21 entered promiscuous mode
<6>device etba1-et15 entered promiscuous mode
<6>device etba1-et16 entered promiscuous mode
<6>device etba1-et22 entered promiscuous mode
<6>device etba1-et24 entered promiscuous mode
<6>device etba1-et18 entered promiscuous mode
<6>device etba1-et19 entered promiscuous mode
<6>device etba1-et14 entered promiscuous mode
<6>device etba1-et20 entered promiscuous mode
<6>device etba1-et23 entered promiscuous mode
<6>device etba1-et17 entered promiscuous mode
<6>device etba1-et10 entered promiscuous mode
<6>device etba1-et11 entered promiscuous mode
<6>device etba1-et12 entered promiscuous mode
<6>device etba1-et13 entered promiscuous mode
<6>device etba1-et8 left promiscuous mode
<6>device etba1-et9 left promiscuous mode
<6>device etba1-et2 left promiscuous mode
<6>device etba1-et3 left promiscuous mode
<6>device etba1-et1 left promiscuous mode
<6>device etba1-et6 left promiscuous mode
<6>device etba1-et7 left promiscuous mode
<6>device etba1-et4 left promiscuous mode
<6>device etba1-et5 left promiscuous mode
<6>device etba1-et14 left promiscuous mode
<6>device etba1-et15 left promiscuous mode
<6>device etba1-et23 left promiscuous mode
<6>device etba1-et17 left promiscuous mode
<6>device etba1-et24 left promiscuous mode
<6>device etba1-et18 left promiscuous mode
<6>device etba1-et19 left promiscuous mode
<6>device etba1-et21 left promiscuous mode
<6>device etba1-et20 left promiscuous mode
<6>device etba1-et16 left promiscuous mode
<6>device etba1-et22 left promiscuous mode
<6>device etba1-et10 left promiscuous mode
<6>device etba1-et11 left promiscuous mode
<6>device etba1-et12 left promiscuous mode
<6>device etba1-et13 left promiscuous mode
<6>device tap1260-1 entered promiscuous mode
<6>device tap1260-1 left promiscuous mode
<6>device etba1-et8 entered promiscuous mode
<6>device etba1-et9 entered promiscuous mode
<6>device etba1-et2 entered promiscuous mode
<6>device etba1-et3 entered promiscuous mode
<6>device etba1-et1 entered promiscuous mode
<6>device etba1-et6 entered promiscuous mode
<6>device etba1-et7 entered promiscuous mode
<6>device etba1-et4 entered promiscuous mode
<6>device etba1-et5 entered promiscuous mode
<6>device etba1-et21 entered promiscuous mode
<6>device etba1-et15 entered promiscuous mode
<6>device etba1-et16 entered promiscuous mode
<6>device etba1-et22 entered promiscuous mode
<6>device etba1-et24 entered promiscuous mode
<6>device etba1-et18 entered promiscuous mode
<6>device etba1-et19 entered promiscuous mode
<6>device etba1-et14 entered promiscuous mode
<6>device etba1-et20 entered promiscuous mode
<6>device etba1-et23 entered promiscuous mode
<6>device etba1-et17 entered promiscuous mode
<6>device etba1-et10 entered promiscuous mode
<6>device etba1-et11 entered promiscuous mode
<6>device etba1-et12 entered promiscuous mode
<6>device etba1-et13 entered promiscuous mode
<6>device etba1-et8 left promiscuous mode
<6>device etba1-et9 left promiscuous mode
<6>device etba1-et2 left promiscuous mode
<6>device etba1-et3 left promiscuous mode
<6>device etba1-et1 left promiscuous mode
<6>device etba1-et6 left promiscuous mode
<6>device etba1-et7 left promiscuous mode
<6>device etba1-et4 left promiscuous mode
<6>device etba1-et5 left promiscuous mode
<6>device etba1-et14 left promiscuous mode
<6>device etba1-et15 left promiscuous mode
<6>device etba1-et23 left promiscuous mode
<6>device etba1-et17 left promiscuous mode
<6>device etba1-et24 left promiscuous mode
<6>device etba1-et18 left promiscuous mode
<6>device etba1-et19 left promiscuous mode
<6>device etba1-et21 left promiscuous mode
<6>device etba1-et20 left promiscuous mode
<6>device etba1-et16 left promiscuous mode
<6>device etba1-et22 left promiscuous mode
<6>device etba1-et10 left promiscuous mode
<6>device etba1-et11 left promiscuous mode
<6>device etba1-et12 left promiscuous mode
<6>device etba1-et13 left promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host1-e0 entered promiscuous mode
<6>device host2-e0 entered promiscuous mode
<6>device host1-e0 left promiscuous mode
<6>device host2-e0 left promiscuous mode
<6>device etba1-et8 entered promiscuous mode
<6>device etba1-et9 entered promiscuous mode
<6>device etba1-et2 entered promiscuous mode
<6>device etba1-et3 entered promiscuous mode
<6>device etba1-et1 entered promiscuous mode
<6>device etba1-et6 entered promiscuous mode
<6>device etba1-et7 entered promiscuous mode
<6>device etba1-et4 entered promiscuous mode
<6>device etba1-et5 entered promiscuous mode
<6>device etba1-et21 entered promiscuous mode
<6>device etba1-et15 entered promiscuous mode
<6>device etba1-et16 entered promiscuous mode
<6>device etba1-et22 entered promiscuous mode
<6>device etba1-et24 entered promiscuous mode
<6>device etba1-et18 entered promiscuous mode
<6>device etba1-et19 entered promiscuous mode
<6>device etba1-et14 entered promiscuous mode
<6>device etba1-et20 entered promiscuous mode
<6>device etba1-et23 entered promiscuous mode
<6>device etba1-et17 entered promiscuous mode
<6>device etba1-et10 entered promiscuous mode
<6>device etba1-et11 entered promiscuous mode
<6>device etba1-et12 entered promiscuous mode
<6>device etba1-et13 entered promiscuous mode
<6>device etba1-et8 left promiscuous mode
<6>device etba1-et9 left promiscuous mode
<6>device etba1-et3 left promiscuous mode
<6>device etba1-et1 left promiscuous mode
<6>device etba1-et4 left promiscuous mode
<6>device etba1-et5 left promiscuous mode
<6>device etba1-et14 left promiscuous mode
<6>device etba1-et15 left promiscuous mode
<6>device etba1-et23 left promiscuous mode
<6>device etba1-et17 left promiscuous mode
<6>device etba1-et24 left promiscuous mode
<6>device etba1-et18 left promiscuous mode
<6>device etba1-et19 left promiscuous mode
<6>device etba1-et21 left promiscuous mode
<6>device etba1-et20 left promiscuous mode
<6>device etba1-et16 left promiscuous mode
<6>device etba1-et10 left promiscuous mode
<6>device etba1-et11 left promiscuous mode
<6>device etba1-et12 left promiscuous mode
<6>device etba1-et13 left promiscuous mode
<6>device etba1-et8 entered promiscuous mode
<6>device etba1-et9 entered promiscuous mode
<6>device etba1-et2 entered promiscuous mode
<6>device etba1-et3 entered promiscuous mode
<6>device etba1-et1 entered promiscuous mode
<6>device etba1-et6 entered promiscuous mode
<6>device etba1-et7 entered promiscuous mode
<6>device etba1-et4 entered promiscuous mode
<6>device etba1-et5 entered promiscuous mode
<6>device etba1-et21 entered promiscuous mode
<6>device etba1-et15 entered promiscuous mode
<6>device etba1-et16 entered promiscuous mode
<6>device etba1-et22 entered promiscuous mode
<6>device etba1-et24 entered promiscuous mode
<6>device etba1-et18 entered promiscuous mode
<6>device etba1-et19 entered promiscuous mode
<6>device etba1-et14 entered promiscuous mode
<6>device etba1-et20 entered promiscuous mode
<6>device etba1-et23 entered promiscuous mode
<6>device etba1-et17 entered promiscuous mode
<6>device etba1-et10 entered promiscuous mode
<6>device etba1-et11 entered promiscuous mode
<6>device etba1-et12 entered promiscuous mode
<6>device etba1-et13 entered promiscuous mode
<7>lacpreconverge1: no IPv6 routers present
<7>lacpreconverge2: no IPv6 routers present
<6>device etba1-et8 entered promiscuous mode
<6>device etba1-et9 entered promiscuous mode
<6>device etba1-et2 entered promiscuous mode
<6>device etba1-et3 entered promiscuous mode
<6>device etba1-et1 entered promiscuous mode
<6>device etba1-et6 entered promiscuous mode
<6>device etba1-et7 entered promiscuous mode
<6>device etba1-et4 entered promiscuous mode
<6>device etba1-et5 entered promiscuous mode
<6>device etba1-et21 entered promiscuous mode
<6>device etba1-et15 entered promiscuous mode
<6>device etba1-et16 entered promiscuous mode
<6>device etba1-et22 entered promiscuous mode
<6>device etba1-et24 entered promiscuous mode
<6>device etba1-et18 entered promiscuous mode
<6>device etba1-et19 entered promiscuous mode
<6>device etba1-et14 entered promiscuous mode
<6>device etba1-et20 entered promiscuous mode
<6>device etba1-et23 entered promiscuous mode
<6>device etba1-et17 entered promiscuous mode
<6>device etba1-et10 entered promiscuous mode
<6>device etba1-et11 entered promiscuous mode
<6>device etba1-et12 entered promiscuous mode
<6>device etba1-et13 entered promiscuous mode
<6>device etba1-et8 left promiscuous mode
<6>device etba1-et9 left promiscuous mode
<6>device etba1-et2 left promiscuous mode
<6>device etba1-et3 left promiscuous mode
<6>device etba1-et1 left promiscuous mode
<6>device etba1-et7 left promiscuous mode
<6>device etba1-et4 left promiscuous mode
<6>device etba1-et5 left promiscuous mode
<6>device etba1-et14 left promiscuous mode
<6>device etba1-et23 left promiscuous mode
<6>device etba1-et17 left promiscuous mode
<6>device etba1-et18 left promiscuous mode
<6>device etba1-et19 left promiscuous mode
<6>device etba1-et21 left promiscuous mode
<6>device etba1-et20 left promiscuous mode
<6>device etba1-et16 left promiscuous mode
<6>device etba1-et22 left promiscuous mode
<6>device etba1-et10 left promiscuous mode
<6>device etba1-et11 left promiscuous mode
<6>device etba1-et12 left promiscuous mode
<6>device etba1-et8 entered promiscuous mode
<6>device etba1-et9 entered promiscuous mode
<6>device etba1-et2 entered promiscuous mode
<6>device etba1-et3 entered promiscuous mode
<6>device etba1-et1 entered promiscuous mode
<6>device etba1-et6 entered promiscuous mode
<6>device etba1-et7 entered promiscuous mode
<6>device etba1-et4 entered promiscuous mode
<6>device etba1-et5 entered promiscuous mode
<6>device etba1-et21 entered promiscuous mode
<6>device etba1-et15 entered promiscuous mode
<6>device etba1-et16 entered promiscuous mode
<6>device etba1-et22 entered promiscuous mode
<6>device etba1-et24 entered promiscuous mode
<6>device etba1-et18 entered promiscuous mode
<6>device etba1-et19 entered promiscuous mode
<6>device etba1-et14 entered promiscuous mode
<6>device etba1-et20 entered promiscuous mode
<6>device etba1-et23 entered promiscuous mode
<6>device etba1-et17 entered promiscuous mode
<6>device etba1-et10 entered promiscuous mode
<6>device etba1-et11 entered promiscuous mode
<6>device etba1-et12 entered promiscuous mode
<6>device etba1-et13 entered promiscuous mode
<6>device acl1-et8 entered promiscuous mode
<6>device acl1-et9 entered promiscuous mode
<6>device acl1-et2 entered promiscuous mode
<6>device acl1-et3 entered promiscuous mode
<6>device acl1-et1 entered promiscuous mode
<6>device acl1-et6 entered promiscuous mode
<6>device acl1-et7 entered promiscuous mode
<6>device acl1-et4 entered promiscuous mode
<6>device acl1-et5 entered promiscuous mode
<6>device acl1-et21 entered promiscuous mode
<6>device acl1-et15 entered promiscuous mode
<6>device acl1-et16 entered promiscuous mode
<6>device acl1-et22 entered promiscuous mode
<6>device acl1-et24 entered promiscuous mode
<6>device acl1-et18 entered promiscuous mode
<6>device acl1-et19 entered promiscuous mode
<6>device acl1-et14 entered promiscuous mode
<6>device acl1-et20 entered promiscuous mode
<6>device acl1-et23 entered promiscuous mode
<6>device acl1-et17 entered promiscuous mode
<6>device acl1-et10 entered promiscuous mode
<6>device acl1-et11 entered promiscuous mode
<6>device acl1-et12 entered promiscuous mode
<6>device acl1-et13 entered promiscuous mode
<6>device acl1-et8 entered promiscuous mode
<6>device acl1-et9 entered promiscuous mode
<6>device acl1-et2 entered promiscuous mode
<6>device acl1-et3 entered promiscuous mode
<6>device acl1-et1 entered promiscuous mode
<6>device acl1-et6 entered promiscuous mode
<6>device acl1-et7 entered promiscuous mode
<6>device acl1-et4 entered promiscuous mode
<6>device acl1-et5 entered promiscuous mode
<6>device acl1-et21 entered promiscuous mode
<6>device acl1-et15 entered promiscuous mode
<6>device acl1-et16 entered promiscuous mode
<6>device acl1-et22 entered promiscuous mode
<6>device acl1-et24 entered promiscuous mode
<6>device acl1-et18 entered promiscuous mode
<6>device acl1-et19 entered promiscuous mode
<6>device acl1-et14 entered promiscuous mode
<6>device acl1-et20 entered promiscuous mode
<6>device acl1-et23 entered promiscuous mode
<6>device acl1-et17 entered promiscuous mode
<6>device acl1-et10 entered promiscuous mode
<6>device acl1-et11 entered promiscuous mode
<6>device acl1-et12 entered promiscuous mode
<6>device acl1-et13 entered promiscuous mode
<6>device acl1-et8 left promiscuous mode
<6>device acl1-et9 left promiscuous mode
<6>device acl1-et2 left promiscuous mode
<6>device acl1-et3 left promiscuous mode
<6>device acl1-et1 left promiscuous mode
<6>device acl1-et6 left promiscuous mode
<6>device acl1-et7 left promiscuous mode
<6>device acl1-et4 left promiscuous mode
<6>device acl1-et5 left promiscuous mode
<6>device acl1-et14 left promiscuous mode
<6>device acl1-et15 left promiscuous mode
<6>device acl1-et23 left promiscuous mode
<6>device acl1-et17 left promiscuous mode
<6>device acl1-et24 left promiscuous mode
<6>device acl1-et18 left promiscuous mode
<6>device acl1-et19 left promiscuous mode
<6>device acl1-et21 left promiscuous mode
<6>device acl1-et20 left promiscuous mode
<6>device acl1-et16 left promiscuous mode
<6>device acl1-et22 left promiscuous mode
<6>device acl1-et10 left promiscuous mode
<6>device acl1-et11 left promiscuous mode
<6>device acl1-et12 left promiscuous mode
<6>device acl1-et13 left promiscuous mode
<6>device acl1-et8 left promiscuous mode
<6>device acl1-et9 left promiscuous mode
<6>device acl1-et2 left promiscuous mode
<6>device acl1-et3 left promiscuous mode
<6>device acl1-et1 left promiscuous mode
<6>device acl1-et6 left promiscuous mode
<6>device acl1-et7 left promiscuous mode
<6>device acl1-et4 left promiscuous mode
<6>device acl1-et5 left promiscuous mode
<6>device acl1-et14 left promiscuous mode
<6>device acl1-et15 left promiscuous mode
<6>device acl1-et23 left promiscuous mode
<6>device acl1-et17 left promiscuous mode
<6>device acl1-et24 left promiscuous mode
<6>device acl1-et18 left promiscuous mode
<6>device acl1-et19 left promiscuous mode
<6>device acl1-et21 left promiscuous mode
<6>device acl1-et20 left promiscuous mode
<6>device acl1-et16 left promiscuous mode
<6>device acl1-et22 left promiscuous mode
<6>device acl1-et10 left promiscuous mode
<6>device acl1-et11 left promiscuous mode
<6>device acl1-et12 left promiscuous mode
<6>device acl1-et13 left promiscuous mode
<6>device acl1-et8 entered promiscuous mode
<6>device acl1-et9 entered promiscuous mode
<6>device acl1-et2 entered promiscuous mode
<6>device acl1-et3 entered promiscuous mode
<6>device acl1-et1 entered promiscuous mode
<6>device acl1-et6 entered promiscuous mode
<6>device acl1-et7 entered promiscuous mode
<6>device acl1-et4 entered promiscuous mode
<6>device acl1-et5 entered promiscuous mode
<6>device acl1-et21 entered promiscuous mode
<6>device acl1-et15 entered promiscuous mode
<6>device acl1-et16 entered promiscuous mode
<6>device acl1-et22 entered promiscuous mode
<6>device acl1-et24 entered promiscuous mode
<6>device acl1-et18 entered promiscuous mode
<6>device acl1-et19 entered promiscuous mode
<6>device acl1-et14 entered promiscuous mode
<6>device acl1-et20 entered promiscuous mode
<6>device acl1-et23 entered promiscuous mode
<6>device acl1-et17 entered promiscuous mode
<6>device acl1-et10 entered promiscuous mode
<6>device acl1-et11 entered promiscuous mode
<6>device acl1-et12 entered promiscuous mode
<6>device acl1-et13 entered promiscuous mode
<6>device acl1-et8 left promiscuous mode
<6>device acl1-et9 left promiscuous mode
<6>device acl1-et2 left promiscuous mode
<6>device acl1-et3 left promiscuous mode
<6>device acl1-et1 left promiscuous mode
<6>device acl1-et6 left promiscuous mode
<6>device acl1-et7 left promiscuous mode
<6>device acl1-et4 left promiscuous mode
<6>device acl1-et5 left promiscuous mode
<6>device acl1-et14 left promiscuous mode
<6>device acl1-et15 left promiscuous mode
<6>device acl1-et23 left promiscuous mode
<6>device acl1-et17 left promiscuous mode
<6>device acl1-et24 left promiscuous mode
<6>device acl1-et18 left promiscuous mode
<6>device acl1-et19 left promiscuous mode
<6>device acl1-et21 left promiscuous mode
<6>device acl1-et20 left promiscuous mode
<6>device acl1-et16 left promiscuous mode
<6>device acl1-et22 left promiscuous mode
<6>device acl1-et10 left promiscuous mode
<6>device acl1-et11 left promiscuous mode
<6>device acl1-et12 left promiscuous mode
<6>device acl1-et13 left promiscuous mode
<6>device acl1-et8 entered promiscuous mode
<6>device acl1-et9 entered promiscuous mode
<6>device acl1-et2 entered promiscuous mode
<6>device acl1-et3 entered promiscuous mode
<6>device acl1-et1 entered promiscuous mode
<6>device acl1-et6 entered promiscuous mode
<6>device acl1-et7 entered promiscuous mode
<6>device acl1-et4 entered promiscuous mode
<6>device acl1-et5 entered promiscuous mode
<6>device acl1-et21 entered promiscuous mode
<6>device acl1-et15 entered promiscuous mode
<6>device acl1-et16 entered promiscuous mode
<6>device acl1-et22 entered promiscuous mode
<6>device acl1-et24 entered promiscuous mode
<6>device acl1-et18 entered promiscuous mode
<6>device acl1-et19 entered promiscuous mode
<6>device acl1-et14 entered promiscuous mode
<6>device acl1-et20 entered promiscuous mode
<6>device acl1-et23 entered promiscuous mode
<6>device acl1-et17 entered promiscuous mode
<6>device acl1-et10 entered promiscuous mode
<6>device acl1-et11 entered promiscuous mode
<6>device acl1-et12 entered promiscuous mode
<6>device acl1-et13 entered promiscuous mode
<6>device acl1-et8 entered promiscuous mode
<6>device acl1-et9 entered promiscuous mode
<6>device acl1-et2 entered promiscuous mode
<6>device acl1-et3 entered promiscuous mode
<6>device acl1-et1 entered promiscuous mode
<6>device acl1-et6 entered promiscuous mode
<6>device acl1-et7 entered promiscuous mode
<6>device acl1-et4 entered promiscuous mode
<6>device acl1-et5 entered promiscuous mode
<6>device acl1-et21 entered promiscuous mode
<6>device acl1-et15 entered promiscuous mode
<6>device acl1-et16 entered promiscuous mode
<6>device acl1-et22 entered promiscuous mode
<6>device acl1-et24 entered promiscuous mode
<6>device acl1-et18 entered promiscuous mode
<6>device acl1-et19 entered promiscuous mode
<6>device acl1-et14 entered promiscuous mode
<6>device acl1-et20 entered promiscuous mode
<6>device acl1-et23 entered promiscuous mode
<6>device acl1-et17 entered promiscuous mode
<6>device acl1-et10 entered promiscuous mode
<6>device acl1-et11 entered promiscuous mode
<6>device acl1-et12 entered promiscuous mode
<6>device acl1-et13 entered promiscuous mode
<6>device acl1-et8 left promiscuous mode
<6>device acl1-et9 left promiscuous mode
<6>device acl1-et2 left promiscuous mode
<6>device acl1-et3 left promiscuous mode
<6>device acl1-et1 left promiscuous mode
<6>device acl1-et6 left promiscuous mode
<6>device acl1-et7 left promiscuous mode
<6>device acl1-et4 left promiscuous mode
<6>device acl1-et5 left promiscuous mode
<6>device acl1-et14 left promiscuous mode
<6>device acl1-et15 left promiscuous mode
<6>device acl1-et23 left promiscuous mode
<6>device acl1-et17 left promiscuous mode
<6>device acl1-et24 left promiscuous mode
<6>device acl1-et18 left promiscuous mode
<6>device acl1-et19 left promiscuous mode
<6>device acl1-et21 left promiscuous mode
<6>device acl1-et20 left promiscuous mode
<6>device acl1-et16 left promiscuous mode
<6>device acl1-et22 left promiscuous mode
<6>device acl1-et10 left promiscuous mode
<6>device acl1-et11 left promiscuous mode
<6>device acl1-et12 left promiscuous mode
<6>device acl1-et13 left promiscuous mode
<6>device acl1-et8 left promiscuous mode
<6>device acl1-et9 left promiscuous mode
<6>device acl1-et2 left promiscuous mode
<6>device acl1-et3 left promiscuous mode
<6>device acl1-et1 left promiscuous mode
<6>device acl1-et6 left promiscuous mode
<6>device acl1-et7 left promiscuous mode
<6>device acl1-et4 left promiscuous mode
<6>device acl1-et5 left promiscuous mode
<6>device acl1-et14 left promiscuous mode
<6>device acl1-et15 left promiscuous mode
<6>device acl1-et23 left promiscuous mode
<6>device acl1-et17 left promiscuous mode
<6>device acl1-et24 left promiscuous mode
<6>device acl1-et18 left promiscuous mode
<6>device acl1-et19 left promiscuous mode
<6>device acl1-et21 left promiscuous mode
<6>device acl1-et20 left promiscuous mode
<6>device acl1-et16 left promiscuous mode
<6>device acl1-et22 left promiscuous mode
<6>device acl1-et10 left promiscuous mode
<6>device acl1-et11 left promiscuous mode
<6>device acl1-et12 left promiscuous mode
<6>device acl1-et13 left promiscuous mode
<6>device acl1-et8 entered promiscuous mode
<6>device acl1-et9 entered promiscuous mode
<6>device acl1-et2 entered promiscuous mode
<6>device acl1-et3 entered promiscuous mode
<6>device acl1-et1 entered promiscuous mode
<6>device acl1-et6 entered promiscuous mode
<6>device acl1-et7 entered promiscuous mode
<6>device acl1-et4 entered promiscuous mode
<6>device acl1-et5 entered promiscuous mode
<6>device acl1-et21 entered promiscuous mode
<6>device acl1-et15 entered promiscuous mode
<6>device acl1-et16 entered promiscuous mode
<6>device acl1-et22 entered promiscuous mode
<6>device acl1-et24 entered promiscuous mode
<6>device acl1-et18 entered promiscuous mode
<6>device acl1-et19 entered promiscuous mode
<6>device acl1-et14 entered promiscuous mode
<6>device acl1-et20 entered promiscuous mode
<6>device acl1-et23 entered promiscuous mode
<6>device acl1-et17 entered promiscuous mode
<6>device acl1-et10 entered promiscuous mode
<6>device acl1-et11 entered promiscuous mode
<6>device acl1-et12 entered promiscuous mode
<6>device acl1-et13 entered promiscuous mode
<6>device acl1-et8 entered promiscuous mode
<6>device acl1-et9 entered promiscuous mode
<6>device acl1-et2 entered promiscuous mode
<6>device acl1-et3 entered promiscuous mode
<6>device acl1-et1 entered promiscuous mode
<6>device acl1-et6 entered promiscuous mode
<6>device acl1-et7 entered promiscuous mode
<6>device acl1-et4 entered promiscuous mode
<6>device acl1-et5 entered promiscuous mode
<6>device acl1-et21 entered promiscuous mode
<6>device acl1-et15 entered promiscuous mode
<6>device acl1-et16 entered promiscuous mode
<6>device acl1-et22 entered promiscuous mode
<6>device acl1-et24 entered promiscuous mode
<6>device acl1-et18 entered promiscuous mode
<6>device acl1-et19 entered promiscuous mode
<6>device acl1-et14 entered promiscuous mode
<6>device acl1-et20 entered promiscuous mode
<6>device acl1-et23 entered promiscuous mode
<6>device acl1-et17 entered promiscuous mode
<6>device acl1-et10 entered promiscuous mode
<6>device acl1-et11 entered promiscuous mode
<6>device acl1-et12 entered promiscuous mode
<6>device acl1-et13 entered promiscuous mode
<6>device acl1-et8 left promiscuous mode
<6>device acl1-et9 left promiscuous mode
<6>device acl1-et2 left promiscuous mode
<6>device acl1-et3 left promiscuous mode
<6>device acl1-et1 left promiscuous mode
<6>device acl1-et6 left promiscuous mode
<6>device acl1-et7 left promiscuous mode
<6>device acl1-et4 left promiscuous mode
<6>device acl1-et5 left promiscuous mode
<6>device acl1-et14 left promiscuous mode
<6>device acl1-et15 left promiscuous mode
<6>device acl1-et23 left promiscuous mode
<6>device acl1-et17 left promiscuous mode
<6>device acl1-et24 left promiscuous mode
<6>device acl1-et18 left promiscuous mode
<6>device acl1-et19 left promiscuous mode
<6>device acl1-et21 left promiscuous mode
<6>device acl1-et20 left promiscuous mode
<6>device acl1-et16 left promiscuous mode
<6>device acl1-et22 left promiscuous mode
<6>device acl1-et10 left promiscuous mode
<6>device acl1-et11 left promiscuous mode
<6>device acl1-et12 left promiscuous mode
<6>device acl1-et13 left promiscuous mode
<6>device acl1-et8 left promiscuous mode
<6>device acl1-et9 left promiscuous mode
<6>device acl1-et2 left promiscuous mode
<6>device acl1-et3 left promiscuous mode
<6>device acl1-et1 left promiscuous mode
<6>device acl1-et6 left promiscuous mode
<6>device acl1-et7 left promiscuous mode
<6>device acl1-et4 left promiscuous mode
<6>device acl1-et5 left promiscuous mode
<6>device acl1-et14 left promiscuous mode
<6>device acl1-et15 left promiscuous mode
<6>device acl1-et23 left promiscuous mode
<6>device acl1-et17 left promiscuous mode
<6>device acl1-et24 left promiscuous mode
<6>device acl1-et18 left promiscuous mode
<6>device acl1-et19 left promiscuous mode
<6>device acl1-et21 left promiscuous mode
<6>device acl1-et20 left promiscuous mode
<6>device acl1-et16 left promiscuous mode
<6>device acl1-et22 left promiscuous mode
<6>device acl1-et10 left promiscuous mode
<6>device acl1-et11 left promiscuous mode
<6>device acl1-et12 left promiscuous mode
<6>device acl1-et13 left promiscuous mode
<6>device acl1-et8 entered promiscuous mode
<6>device acl1-et9 entered promiscuous mode
<6>device acl1-et2 entered promiscuous mode
<6>device acl1-et3 entered promiscuous mode
<6>device acl1-et1 entered promiscuous mode
<6>device acl1-et6 entered promiscuous mode
<6>device acl1-et7 entered promiscuous mode
<6>device acl1-et4 entered promiscuous mode
<6>device acl1-et5 entered promiscuous mode
<6>device acl1-et21 entered promiscuous mode
<6>device acl1-et15 entered promiscuous mode
<6>device acl1-et16 entered promiscuous mode
<6>device acl1-et22 entered promiscuous mode
<6>device acl1-et24 entered promiscuous mode
<6>device acl1-et18 entered promiscuous mode
<6>device acl1-et19 entered promiscuous mode
<6>device acl1-et14 entered promiscuous mode
<6>device acl1-et20 entered promiscuous mode
<6>device acl1-et23 entered promiscuous mode
<6>device acl1-et17 entered promiscuous mode
<6>device acl1-et10 entered promiscuous mode
<6>device acl1-et11 entered promiscuous mode
<6>device acl1-et12 entered promiscuous mode
<6>device acl1-et13 entered promiscuous mode
<6>device etba1-et9 left promiscuous mode
<6>device etba1-et3 left promiscuous mode
<6>device etba1-et6 left promiscuous mode
<6>device etba1-et7 left promiscuous mode
<6>device etba1-et4 left promiscuous mode
<6>device etba1-et5 left promiscuous mode
<6>device etba1-et14 left promiscuous mode
<6>device etba1-et15 left promiscuous mode
<6>device etba1-et23 left promiscuous mode
<6>device etba1-et17 left promiscuous mode
<6>device etba1-et24 left promiscuous mode
<6>device etba1-et18 left promiscuous mode
<6>device etba1-et19 left promiscuous mode
<6>device etba1-et21 left promiscuous mode
<6>device etba1-et20 left promiscuous mode
<6>device etba1-et22 left promiscuous mode
<6>device etba1-et10 left promiscuous mode
<6>device etba1-et11 left promiscuous mode
<6>device etba1-et12 left promiscuous mode
<6>device etba1-et13 left promiscuous mode
<6>device acl1-et8 left promiscuous mode
<6>device acl1-et9 left promiscuous mode
<6>device acl1-et2 left promiscuous mode
<6>device acl1-et3 left promiscuous mode
<6>device acl1-et1 left promiscuous mode
<6>device acl1-et6 left promiscuous mode
<6>device acl1-et7 left promiscuous mode
<6>device acl1-et4 left promiscuous mode
<6>device acl1-et5 left promiscuous mode
<6>device acl1-et14 left promiscuous mode
<6>device acl1-et15 left promiscuous mode
<6>device acl1-et23 left promiscuous mode
<6>device acl1-et17 left promiscuous mode
<6>device acl1-et24 left promiscuous mode
<6>device acl1-et18 left promiscuous mode
<6>device acl1-et19 left promiscuous mode
<6>device acl1-et21 left promiscuous mode
<6>device acl1-et20 left promiscuous mode
<6>device acl1-et16 left promiscuous mode
<6>device acl1-et22 left promiscuous mode
<6>device acl1-et10 left promiscuous mode
<6>device acl1-et11 left promiscuous mode
<6>device acl1-et12 left promiscuous mode
<6>device acl1-et13 left promiscuous mode
<6>device acl1-et8 entered promiscuous mode
<6>device acl1-et9 entered promiscuous mode
<6>device acl1-et2 entered promiscuous mode
<6>device acl1-et3 entered promiscuous mode
<6>device acl1-et1 entered promiscuous mode
<6>device acl1-et6 entered promiscuous mode
<6>device acl1-et7 entered promiscuous mode
<6>device acl1-et4 entered promiscuous mode
<6>device acl1-et5 entered promiscuous mode
<6>device acl1-et21 entered promiscuous mode
<6>device acl1-et15 entered promiscuous mode
<6>device acl1-et16 entered promiscuous mode
<6>device acl1-et22 entered promiscuous mode
<6>device acl1-et24 entered promiscuous mode
<6>device acl1-et18 entered promiscuous mode
<6>device acl1-et19 entered promiscuous mode
<6>device acl1-et14 entered promiscuous mode
<6>device acl1-et20 entered promiscuous mode
<6>device acl1-et23 entered promiscuous mode
<6>device acl1-et17 entered promiscuous mode
<6>device acl1-et10 entered promiscuous mode
<6>device acl1-et11 entered promiscuous mode
<6>device acl1-et12 entered promiscuous mode
<6>device acl1-et13 entered promiscuous mode
<6>device acl1-et8 left promiscuous mode
<6>device acl1-et9 left promiscuous mode
<6>device acl1-et2 left promiscuous mode
<6>device acl1-et3 left promiscuous mode
<6>device acl1-et1 left promiscuous mode
<6>device acl1-et6 left promiscuous mode
<6>device acl1-et7 left promiscuous mode
<6>device acl1-et4 left promiscuous mode
<6>device acl1-et5 left promiscuous mode
<6>device acl1-et14 left promiscuous mode
<6>device acl1-et15 left promiscuous mode
<6>device acl1-et23 left promiscuous mode
<6>device acl1-et17 left promiscuous mode
<6>device acl1-et24 left promiscuous mode
<6>device acl1-et18 left promiscuous mode
<6>device acl1-et19 left promiscuous mode
<6>device acl1-et21 left promiscuous mode
<6>device acl1-et20 left promiscuous mode
<6>device acl1-et16 left promiscuous mode
<6>device acl1-et22 left promiscuous mode
<6>device acl1-et10 left promiscuous mode
<6>device acl1-et11 left promiscuous mode
<6>device acl1-et12 left promiscuous mode
<6>device acl1-et13 left promiscuous mode
<7>rstpeleventap1: no IPv6 routers present
<7>rstpeleventap2: no IPv6 routers present
<7>rstpeleventap4: no IPv6 routers present
<7>rstpeleventap3: no IPv6 routers present
<7>tap30-1: no IPv6 routers present
<7>tap30-3: no IPv6 routers present
<7>tap30-2: no IPv6 routers present
<7>tap30-3: no IPv6 routers present
<7>tap30-4: no IPv6 routers present
<7>tap30-2: no IPv6 routers present
<7>tap30-1: no IPv6 routers present
<7>tap30-2: no IPv6 routers present
<7>tap30-1: no IPv6 routers present
<7>tap30-3: no IPv6 routers present
<7>tap30-4: no IPv6 routers present
<6>device etba1-et8 entered promiscuous mode
<6>device etba1-et9 entered promiscuous mode
<6>device etba1-et2 entered promiscuous mode
<6>device etba1-et3 entered promiscuous mode
<6>device etba1-et1 entered promiscuous mode
<6>device etba1-et6 entered promiscuous mode
<6>device etba1-et7 entered promiscuous mode
<6>device etba1-et4 entered promiscuous mode
<6>device etba1-et5 entered promiscuous mode
<6>device etba1-et21 entered promiscuous mode
<6>device etba1-et15 entered promiscuous mode
<6>device etba1-et16 entered promiscuous mode
<6>device etba1-et22 entered promiscuous mode
<6>device etba1-et24 entered promiscuous mode
<6>device etba1-et18 entered promiscuous mode
<6>device etba1-et19 entered promiscuous mode
<6>device etba1-et14 entered promiscuous mode
<6>device etba1-et20 entered promiscuous mode
<6>device etba1-et23 entered promiscuous mode
<6>device etba1-et17 entered promiscuous mode
<6>device etba1-et10 entered promiscuous mode
<6>device etba1-et11 entered promiscuous mode
<6>device etba1-et12 entered promiscuous mode
<6>device etba1-et13 entered promiscuous mode
<6>device etba1-et8 entered promiscuous mode
<6>device etba1-et9 entered promiscuous mode
<6>device etba1-et2 entered promiscuous mode
<6>device etba1-et3 entered promiscuous mode
<6>device etba1-et1 entered promiscuous mode
<6>device etba1-et6 entered promiscuous mode
<6>device etba1-et7 entered promiscuous mode
<6>device etba1-et4 entered promiscuous mode
<6>device etba1-et5 entered promiscuous mode
<6>device etba1-et21 entered promiscuous mode
<6>device etba1-et15 entered promiscuous mode
<6>device etba1-et16 entered promiscuous mode
<6>device etba1-et22 entered promiscuous mode
<6>device etba1-et24 entered promiscuous mode
<6>device etba1-et18 entered promiscuous mode
<6>device etba1-et19 entered promiscuous mode
<6>device etba1-et14 entered promiscuous mode
<6>device etba1-et20 entered promiscuous mode
<6>device etba1-et23 entered promiscuous mode
<6>device etba1-et17 entered promiscuous mode
<6>device etba1-et10 entered promiscuous mode
<6>device etba1-et11 entered promiscuous mode
<6>device etba1-et12 entered promiscuous mode
<6>device etba1-et13 entered promiscuous mode
<4>python used greatest stack depth: 3472 bytes left
<6>device etba1-et8 left promiscuous mode
<6>device etba1-et9 left promiscuous mode
<6>device etba1-et2 left promiscuous mode
<6>device etba1-et3 left promiscuous mode
<6>device etba1-et1 left promiscuous mode
<6>device etba1-et6 left promiscuous mode
<6>device etba1-et7 left promiscuous mode
<6>device etba1-et4 left promiscuous mode
<6>device etba1-et5 left promiscuous mode
<6>device etba1-et14 left promiscuous mode
<6>device etba1-et15 left promiscuous mode
<6>device etba1-et23 left promiscuous mode
<6>device etba1-et17 left promiscuous mode
<6>device etba1-et24 left promiscuous mode
<6>device etba1-et18 left promiscuous mode
<6>device etba1-et19 left promiscuous mode
<6>device etba1-et21 left promiscuous mode
<6>device etba1-et20 left promiscuous mode
<6>device etba1-et16 left promiscuous mode
<6>device etba1-et22 left promiscuous mode
<6>device etba1-et10 left promiscuous mode
<6>device etba1-et11 left promiscuous mode
<6>device etba1-et12 left promiscuous mode
<6>device etba1-et13 left promiscuous mode
<6>device etba1-et8 entered promiscuous mode
<6>device etba1-et9 entered promiscuous mode
<6>device etba1-et2 entered promiscuous mode
<6>device etba1-et3 entered promiscuous mode
<6>device etba1-et1 entered promiscuous mode
<6>device etba1-et6 entered promiscuous mode
<6>device etba1-et7 entered promiscuous mode
<6>device etba1-et4 entered promiscuous mode
<6>device etba1-et5 entered promiscuous mode
<6>device etba1-et21 entered promiscuous mode
<6>device etba1-et15 entered promiscuous mode
<6>device etba1-et16 entered promiscuous mode
<6>device etba1-et22 entered promiscuous mode
<6>device etba1-et24 entered promiscuous mode
<6>device etba1-et18 entered promiscuous mode
<6>device etba1-et19 entered promiscuous mode
<6>device etba1-et14 entered promiscuous mode
<6>device etba1-et20 entered promiscuous mode
<6>device etba1-et23 entered promiscuous mode
<6>device etba1-et17 entered promiscuous mode
<6>device etba1-et10 entered promiscuous mode
<6>device etba1-et11 entered promiscuous mode
<6>device etba1-et12 entered promiscuous mode
<6>device etba1-et13 entered promiscuous mode
<6>device etba1-et8 left promiscuous mode
<6>device etba1-et9 left promiscuous mode
<6>device etba1-et2 left promiscuous mode
<6>device etba1-et3 left promiscuous mode
<6>device etba1-et1 left promiscuous mode
<6>device etba1-et6 left promiscuous mode
<6>device etba1-et7 left promiscuous mode
<6>device etba1-et4 left promiscuous mode
<6>device etba1-et5 left promiscuous mode
<6>device etba1-et14 left promiscuous mode
<6>device etba1-et15 left promiscuous mode
<6>device etba1-et23 left promiscuous mode
<6>device etba1-et17 left promiscuous mode
<6>device etba1-et24 left promiscuous mode
<6>device etba1-et18 left promiscuous mode
<6>device etba1-et19 left promiscuous mode
<6>device etba1-et21 left promiscuous mode
<6>device etba1-et20 left promiscuous mode
<6>device etba1-et16 left promiscuous mode
<6>device etba1-et22 left promiscuous mode
<6>device etba1-et10 left promiscuous mode
<6>device etba1-et11 left promiscuous mode
<6>device etba1-et12 left promiscuous mode
<6>device etba1-et13 left promiscuous mode
<6>device etba1-et8 left promiscuous mode
<6>device etba1-et9 left promiscuous mode
<6>device etba1-et2 left promiscuous mode
<6>device etba1-et3 left promiscuous mode
<6>device etba1-et1 left promiscuous mode
<6>device etba1-et6 left promiscuous mode
<6>device etba1-et7 left promiscuous mode
<6>device etba1-et4 left promiscuous mode
<6>device etba1-et5 left promiscuous mode
<6>device etba1-et14 left promiscuous mode
<6>device etba1-et15 left promiscuous mode
<6>device etba1-et23 left promiscuous mode
<6>device etba1-et17 left promiscuous mode
<6>device etba1-et24 left promiscuous mode
<6>device etba1-et18 left promiscuous mode
<6>device etba1-et19 left promiscuous mode
<6>device etba1-et21 left promiscuous mode
<6>device etba1-et20 left promiscuous mode
<6>device etba1-et16 left promiscuous mode
<6>device etba1-et22 left promiscuous mode
<6>device etba1-et10 left promiscuous mode
<6>device etba1-et11 left promiscuous mode
<6>device etba1-et12 left promiscuous mode
<6>device etba1-et13 left promiscuous mode
<6>device etba1-et8 entered promiscuous mode
<6>device etba1-et9 entered promiscuous mode
<6>device etba1-et2 entered promiscuous mode
<6>device etba1-et3 entered promiscuous mode
<6>device etba1-et1 entered promiscuous mode
<6>device etba1-et6 entered promiscuous mode
<6>device etba1-et7 entered promiscuous mode
<6>device etba1-et4 entered promiscuous mode
<6>device etba1-et5 entered promiscuous mode
<6>device etba1-et21 entered promiscuous mode
<6>device etba1-et15 entered promiscuous mode
<6>device etba1-et16 entered promiscuous mode
<6>device etba1-et22 entered promiscuous mode
<6>device etba1-et24 entered promiscuous mode
<6>device etba1-et18 entered promiscuous mode
<6>device etba1-et19 entered promiscuous mode
<6>device etba1-et14 entered promiscuous mode
<6>device etba1-et20 entered promiscuous mode
<6>device etba1-et23 entered promiscuous mode
<6>device etba1-et17 entered promiscuous mode
<6>device etba1-et10 entered promiscuous mode
<6>device etba1-et11 entered promiscuous mode
<6>device etba1-et12 entered promiscuous mode
<6>device etba1-et13 entered promiscuous mode
<6>device etba1-et8 entered promiscuous mode
<6>device etba1-et9 entered promiscuous mode
<6>device etba1-et2 entered promiscuous mode
<6>device etba1-et3 entered promiscuous mode
<6>device etba1-et1 entered promiscuous mode
<6>device etba1-et6 entered promiscuous mode
<6>device etba1-et7 entered promiscuous mode
<6>device etba1-et4 entered promiscuous mode
<6>device etba1-et5 entered promiscuous mode
<6>device etba1-et21 entered promiscuous mode
<6>device etba1-et15 entered promiscuous mode
<6>device etba1-et16 entered promiscuous mode
<6>device etba1-et22 entered promiscuous mode
<6>device etba1-et24 entered promiscuous mode
<6>device etba1-et18 entered promiscuous mode
<6>device etba1-et19 entered promiscuous mode
<6>device etba1-et14 entered promiscuous mode
<6>device etba1-et20 entered promiscuous mode
<6>device etba1-et23 entered promiscuous mode
<6>device etba1-et17 entered promiscuous mode
<6>device etba1-et10 entered promiscuous mode
<6>device etba1-et11 entered promiscuous mode
<6>device etba1-et12 entered promiscuous mode
<6>device etba1-et13 entered promiscuous mode
<6>device etba1-et8 left promiscuous mode
<6>device etba1-et9 left promiscuous mode
<6>device etba1-et2 left promiscuous mode
<6>device etba1-et3 left promiscuous mode
<6>device etba1-et1 left promiscuous mode
<6>device etba1-et6 left promiscuous mode
<6>device etba1-et7 left promiscuous mode
<6>device etba1-et4 left promiscuous mode
<6>device etba1-et5 left promiscuous mode
<6>device etba1-et14 left promiscuous mode
<6>device etba1-et15 left promiscuous mode
<6>device etba1-et23 left promiscuous mode
<6>device etba1-et17 left promiscuous mode
<6>device etba1-et24 left promiscuous mode
<6>device etba1-et18 left promiscuous mode
<6>device etba1-et19 left promiscuous mode
<6>device etba1-et21 left promiscuous mode
<6>device etba1-et20 left promiscuous mode
<6>device etba1-et16 left promiscuous mode
<6>device etba1-et22 left promiscuous mode
<6>device etba1-et10 left promiscuous mode
<6>device etba1-et11 left promiscuous mode
<6>device etba1-et12 left promiscuous mode
<6>device etba1-et13 left promiscuous mode
<6>device etba1-et8 entered promiscuous mode
<6>device etba1-et9 entered promiscuous mode
<6>device etba1-et2 entered promiscuous mode
<6>device etba1-et3 entered promiscuous mode
<6>device etba1-et1 entered promiscuous mode
<6>device etba1-et6 entered promiscuous mode
<6>device etba1-et7 entered promiscuous mode
<6>device etba1-et4 entered promiscuous mode
<6>device etba1-et5 entered promiscuous mode
<6>device etba1-et21 entered promiscuous mode
<6>device etba1-et15 entered promiscuous mode
<6>device etba1-et16 entered promiscuous mode
<6>device etba1-et22 entered promiscuous mode
<6>device etba1-et24 entered promiscuous mode
<6>device etba1-et18 entered promiscuous mode
<6>device etba1-et19 entered promiscuous mode
<6>device etba1-et14 entered promiscuous mode
<6>device etba1-et20 entered promiscuous mode
<6>device etba1-et23 entered promiscuous mode
<6>device etba1-et17 entered promiscuous mode
<6>device etba1-et10 entered promiscuous mode
<6>device etba1-et11 entered promiscuous mode
<6>device etba1-et12 entered promiscuous mode
<6>device etba1-et13 entered promiscuous mode
<6>device etba1-et8 left promiscuous mode
<6>device etba1-et9 left promiscuous mode
<6>device etba1-et2 left promiscuous mode
<6>device etba1-et3 left promiscuous mode
<6>device etba1-et1 left promiscuous mode
<6>device etba1-et6 left promiscuous mode
<6>device etba1-et7 left promiscuous mode
<6>device etba1-et4 left promiscuous mode
<6>device etba1-et5 left promiscuous mode
<6>device etba1-et14 left promiscuous mode
<6>device etba1-et15 left promiscuous mode
<6>device etba1-et23 left promiscuous mode
<6>device etba1-et17 left promiscuous mode
<6>device etba1-et24 left promiscuous mode
<6>device etba1-et18 left promiscuous mode
<6>device etba1-et19 left promiscuous mode
<6>device etba1-et21 left promiscuous mode
<6>device etba1-et20 left promiscuous mode
<6>device etba1-et16 left promiscuous mode
<6>device etba1-et22 left promiscuous mode
<6>device etba1-et10 left promiscuous mode
<6>device etba1-et11 left promiscuous mode
<6>device etba1-et12 left promiscuous mode
<6>device etba1-et13 left promiscuous mode
<6>device etba1-et8 left promiscuous mode
<6>device etba1-et9 left promiscuous mode
<6>device etba1-et2 left promiscuous mode
<6>device etba1-et3 left promiscuous mode
<6>device etba1-et1 left promiscuous mode
<6>device etba1-et6 left promiscuous mode
<6>device etba1-et7 left promiscuous mode
<6>device etba1-et4 left promiscuous mode
<6>device etba1-et5 left promiscuous mode
<6>device etba1-et14 left promiscuous mode
<6>device etba1-et15 left promiscuous mode
<6>device etba1-et23 left promiscuous mode
<6>device etba1-et17 left promiscuous mode
<6>device etba1-et24 left promiscuous mode
<6>device etba1-et18 left promiscuous mode
<6>device etba1-et19 left promiscuous mode
<6>device etba1-et21 left promiscuous mode
<6>device etba1-et20 left promiscuous mode
<6>device etba1-et16 left promiscuous mode
<6>device etba1-et22 left promiscuous mode
<6>device etba1-et10 left promiscuous mode
<6>device etba1-et11 left promiscuous mode
<6>device etba1-et12 left promiscuous mode
<6>device etba1-et13 left promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host1-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host2-e0 entered promiscuous mode
<6>device host1-e0 left promiscuous mode
<6>device host2-e0 left promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host1-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host2-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host3-e0 entered promiscuous mode
<6>device host1-e0 left promiscuous mode
<6>device host2-e0 left promiscuous mode
<6>device host3-e0 left promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host1-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host2-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>device host3-e0 entered promiscuous mode
<6>device host3-e1 entered promiscuous mode
<6>device host3-e1 left promiscuous mode
<6>device host3-e1 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host4-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>device host5-e0 entered promiscuous mode
<6>device host5-e1 entered promiscuous mode
<6>device host5-e1 left promiscuous mode
<6>device host5-e1 entered promiscuous mode
<6>device host1-e0 left promiscuous mode
<6>device host2-e0 left promiscuous mode
<6>device host3-e1 left promiscuous mode
<6>device host4-e0 left promiscuous mode
<6>device host5-e1 left promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host1-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host2-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>device host3-e0 entered promiscuous mode
<6>device host3-e1 entered promiscuous mode
<6>device host3-e1 left promiscuous mode
<6>device host3-e1 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host4-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>device host5-e0 entered promiscuous mode
<6>device host5-e1 entered promiscuous mode
<6>device host5-e1 left promiscuous mode
<6>device host5-e1 entered promiscuous mode
<6>device host1-e0 left promiscuous mode
<6>device host2-e0 left promiscuous mode
<6>device host3-e1 left promiscuous mode
<6>device host4-e0 left promiscuous mode
<6>device host5-e1 left promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host1-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host2-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host3-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host4-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host5-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>device host6-e0 entered promiscuous mode
<6>device host6-e1 entered promiscuous mode
<6>device host6-e1 left promiscuous mode
<6>device host6-e1 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>device host7-e0 entered promiscuous mode
<6>device host7-e1 entered promiscuous mode
<6>device host7-e1 left promiscuous mode
<6>device host7-e1 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth2: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth3: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth4: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth4: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth5: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth5: link becomes ready
<6>device host8-e0 entered promiscuous mode
<6>device host8-e1 entered promiscuous mode
<6>device host8-e2 entered promiscuous mode
<6>device host8-e3 entered promiscuous mode
<6>device host8-e4 entered promiscuous mode
<6>device host8-e5 entered promiscuous mode
<6>device host8-e5 left promiscuous mode
<6>device host8-e4 left promiscuous mode
<6>device host8-e3 left promiscuous mode
<6>device host8-e2 left promiscuous mode
<6>device host8-e1 left promiscuous mode
<6>device host8-e1 entered promiscuous mode
<6>device host8-e2 entered promiscuous mode
<6>device host8-e3 entered promiscuous mode
<6>device host8-e4 entered promiscuous mode
<6>device host8-e5 entered promiscuous mode
<6>device host8-e5 left promiscuous mode
<6>device host8-e4 left promiscuous mode
<6>device host8-e3 left promiscuous mode
<6>device host8-e2 left promiscuous mode
<6>device host8-e2 entered promiscuous mode
<6>device host8-e3 entered promiscuous mode
<6>device host8-e4 entered promiscuous mode
<6>device host8-e5 entered promiscuous mode
<6>device host8-e5 left promiscuous mode
<6>device host8-e4 left promiscuous mode
<6>device host8-e3 left promiscuous mode
<6>device host8-e3 entered promiscuous mode
<6>device host8-e4 entered promiscuous mode
<6>device host8-e5 entered promiscuous mode
<6>device host8-e5 left promiscuous mode
<6>device host8-e4 left promiscuous mode
<6>device host8-e4 entered promiscuous mode
<6>device host8-e5 entered promiscuous mode
<6>device host8-e5 left promiscuous mode
<6>device host8-e5 entered promiscuous mode
<6>device host1-e0 left promiscuous mode
<6>device host2-e0 left promiscuous mode
<6>device host3-e0 left promiscuous mode
<6>device host4-e0 left promiscuous mode
<6>device host5-e0 left promiscuous mode
<6>device host6-e1 left promiscuous mode
<6>device host7-e1 left promiscuous mode
<6>device host8-e5 left promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host1-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host2-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>device host3-e0 entered promiscuous mode
<6>device host3-e1 entered promiscuous mode
<6>device host3-e1 left promiscuous mode
<6>device host3-e1 entered promiscuous mode
<6>device host1-e0 left promiscuous mode
<6>device host2-e0 left promiscuous mode
<6>device host3-e1 left promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host1-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host2-e0 entered promiscuous mode
<6>device host1-e0 left promiscuous mode
<6>device host2-e0 left promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host1-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host2-e0 entered promiscuous mode
<6>device host1-e0 left promiscuous mode
<6>device host2-e0 left promiscuous mode
<6>device vlan1999 entered promiscuous mode
<6>device fabric entered promiscuous mode
<6>device vlan1999 left promiscuous mode
<6>device fabric left promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device rtr2-et8 entered promiscuous mode
<6>device rtr2-et9 entered promiscuous mode
<6>device rtr2-et2 entered promiscuous mode
<6>device rtr2-et3 entered promiscuous mode
<6>device rtr2-et1 entered promiscuous mode
<6>device rtr2-et6 entered promiscuous mode
<6>device rtr2-et7 entered promiscuous mode
<6>device rtr2-et4 entered promiscuous mode
<6>device rtr2-et5 entered promiscuous mode
<6>device rtr2-et21 entered promiscuous mode
<6>device rtr2-et15 entered promiscuous mode
<6>device rtr2-et16 entered promiscuous mode
<6>device rtr2-et22 entered promiscuous mode
<6>device rtr2-et24 entered promiscuous mode
<6>device rtr2-et18 entered promiscuous mode
<6>device rtr2-et19 entered promiscuous mode
<6>device rtr2-et14 entered promiscuous mode
<6>device rtr2-et20 entered promiscuous mode
<6>device rtr2-et23 entered promiscuous mode
<6>device rtr2-et17 entered promiscuous mode
<6>device rtr2-et10 entered promiscuous mode
<6>device rtr2-et11 entered promiscuous mode
<6>device rtr2-et12 entered promiscuous mode
<6>device rtr2-et13 entered promiscuous mode
<6>device rtr3-et1 entered promiscuous mode
<6>device rtr3-et1 left promiscuous mode
<6>device rtr2-et1 left promiscuous mode
<6>device rtr2-et2 left promiscuous mode
<6>device rtr2-et3 left promiscuous mode
<6>device rtr2-et4 left promiscuous mode
<6>device rtr2-et5 left promiscuous mode
<6>device rtr2-et6 left promiscuous mode
<6>device rtr2-et7 left promiscuous mode
<6>device rtr2-et8 left promiscuous mode
<6>device rtr2-et10 left promiscuous mode
<6>device rtr2-et11 left promiscuous mode
<6>device rtr2-et12 left promiscuous mode
<6>device rtr2-et13 left promiscuous mode
<6>device rtr2-et14 left promiscuous mode
<6>device rtr2-et15 left promiscuous mode
<6>device rtr2-et16 left promiscuous mode
<6>device rtr2-et17 left promiscuous mode
<6>device rtr2-et18 left promiscuous mode
<6>device rtr2-et19 left promiscuous mode
<6>device rtr2-et20 left promiscuous mode
<6>device rtr2-et21 left promiscuous mode
<6>device rtr2-et22 left promiscuous mode
<6>device rtr2-et23 left promiscuous mode
<6>device rtr2-et24 left promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host1-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host2-e0 entered promiscuous mode
<6>device host1-e0 left promiscuous mode
<6>device host2-e0 left promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host1-e0 entered promiscuous mode
<6>device host1-e0 left promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth2: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth3: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth4: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth4: link becomes ready
<6>ADDRCONF(NETDEV_CHANGE): host1-e0: link becomes ready
<6>ADDRCONF(NETDEV_CHANGE): host1-e1: link becomes ready
<6>ADDRCONF(NETDEV_CHANGE): host1-e2: link becomes ready
<6>ADDRCONF(NETDEV_CHANGE): host1-e3: link becomes ready
<7>host1-e4: no IPv6 routers present
<6>device etba1-et8 entered promiscuous mode
<6>device etba1-et9 entered promiscuous mode
<6>device etba1-et2 entered promiscuous mode
<6>device etba1-et3 entered promiscuous mode
<6>device etba1-et1 entered promiscuous mode
<6>device etba1-et6 entered promiscuous mode
<6>device etba1-et7 entered promiscuous mode
<6>device etba1-et4 entered promiscuous mode
<6>device etba1-et5 entered promiscuous mode
<6>device etba1-et21 entered promiscuous mode
<6>device etba1-et15 entered promiscuous mode
<6>device etba1-et16 entered promiscuous mode
<6>device etba1-et22 entered promiscuous mode
<6>device etba1-et24 entered promiscuous mode
<6>device etba1-et18 entered promiscuous mode
<6>device etba1-et19 entered promiscuous mode
<6>device etba1-et14 entered promiscuous mode
<6>device etba1-et20 entered promiscuous mode
<6>device etba1-et23 entered promiscuous mode
<6>device etba1-et17 entered promiscuous mode
<6>device etba1-et10 entered promiscuous mode
<6>device etba1-et11 entered promiscuous mode
<6>device etba1-et12 entered promiscuous mode
<6>device etba1-et13 entered promiscuous mode
<6>device etba1-et8 left promiscuous mode
<6>device etba1-et9 left promiscuous mode
<6>device etba1-et2 left promiscuous mode
<6>device etba1-et3 left promiscuous mode
<6>device etba1-et1 left promiscuous mode
<6>device etba1-et6 left promiscuous mode
<6>device etba1-et7 left promiscuous mode
<6>device etba1-et4 left promiscuous mode
<6>device etba1-et5 left promiscuous mode
<6>device etba1-et14 left promiscuous mode
<6>device etba1-et15 left promiscuous mode
<6>device etba1-et23 left promiscuous mode
<6>device etba1-et17 left promiscuous mode
<6>device etba1-et24 left promiscuous mode
<6>device etba1-et18 left promiscuous mode
<6>device etba1-et19 left promiscuous mode
<6>device etba1-et21 left promiscuous mode
<6>device etba1-et20 left promiscuous mode
<6>device etba1-et16 left promiscuous mode
<6>device etba1-et22 left promiscuous mode
<6>device etba1-et10 left promiscuous mode
<6>device etba1-et11 left promiscuous mode
<6>device etba1-et12 left promiscuous mode
<6>device etba1-et13 left promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth2: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>perl[32550]: segfault at 0 ip 00000000f757b7a6 sp 00000000ffa57c70 error 4 in libperl.so[f7433000+25f000]
<6>perl[32552]: segfault at 0 ip 00000000f76147a6 sp 00000000ffe10710 error 4 in libperl.so[f74cc000+25f000]
<6>perl[32554]: segfault at 0 ip 00000000f75cd7a6 sp 00000000ff85ab50 error 4 in libperl.so[f7485000+25f000]
<6>perl[32556]: segfault at 0 ip 00000000f76367a6 sp 00000000ff948f10 error 4 in libperl.so[f74ee000+25f000]
<6>perl[32561]: segfault at 0 ip 00000000f75f17a6 sp 00000000ffa2ef80 error 4 in libperl.so[f74a9000+25f000]
<6>perl[32572]: segfault at 0 ip 00000000f75aa7a6 sp 00000000ffa2dd00 error 4 in libperl.so[f7462000+25f000]
<6>perl[32574]: segfault at 0 ip 00000000f75747a6 sp 00000000ffe85cc0 error 4 in libperl.so[f742c000+25f000]
<6>perl[32576]: segfault at 0 ip 00000000f761b7a6 sp 00000000ffcdc100 error 4 in libperl.so[f74d3000+25f000]
<6>perl[32578]: segfault at 0 ip 00000000f756b7a6 sp 00000000fffe3660 error 4 in libperl.so[f7423000+25f000]
<6>perl[32580]: segfault at 0 ip 00000000f757f7a6 sp 00000000ffa3fe10 error 4 in libperl.so[f7437000+25f000]
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<4>show_signal_msg: 24 callbacks suppressed
<6>perl[921]: segfault at 0 ip 00000000f75687a6 sp 00000000ffd21ce0 error 4 in libperl.so[f7420000+25f000]
<6>perl[923]: segfault at 0 ip 00000000f75bf7a6 sp 00000000ff8467a0 error 4 in libperl.so[f7477000+25f000]
<6>perl[925]: segfault at 0 ip 00000000f759c7a6 sp 00000000ffca8240 error 4 in libperl.so[f7454000+25f000]
<6>perl[927]: segfault at 0 ip 00000000f75a97a6 sp 00000000ff7fc7a0 error 4 in libperl.so[f7461000+25f000]
<6>perl[944]: segfault at 0 ip 00000000f75ae7a6 sp 00000000ffdf9480 error 4 in libperl.so[f7466000+25f000]
<6>perl[949]: segfault at 0 ip 00000000f75a37a6 sp 00000000ff845e50 error 4 in libperl.so[f745b000+25f000]
<6>perl[951]: segfault at 0 ip 00000000f75e77a6 sp 00000000fff2ffb0 error 4 in libperl.so[f749f000+25f000]
<6>perl[953]: segfault at 0 ip 00000000f76437a6 sp 00000000ffc42e90 error 4 in libperl.so[f74fb000+25f000]
<6>perl[955]: segfault at 0 ip 00000000f761e7a6 sp 00000000ffa76760 error 4 in libperl.so[f74d6000+25f000]
<6>perl[957]: segfault at 0 ip 00000000f759b7a6 sp 00000000ff9fd9c0 error 4 in libperl.so[f7453000+25f000]
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host1-e0 entered promiscuous mode
<6>udev: starting version 145
<6>udev: starting version 145
<6>device fabric entered promiscuous mode
<6>device fabric left promiscuous mode
<6>device host1-e0 left promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): RO-i0-961: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): RO-i0-961: link becomes ready
<4>show_signal_msg: 24 callbacks suppressed
<6>cliribd[2542]: segfault at 5f ip 000000000805a61c sp 00000000ff9d22f0 error 4 in cliribd[8048000+ef000]
<6>perl[2586]: segfault at 0 ip 00000000f75b77a6 sp 00000000ffc02130 error 4 in libperl.so[f746f000+25f000]
<6>perl[2597]: segfault at 0 ip 00000000f75e07a6 sp 00000000ffd3a3f0 error 4 in libperl.so[f7498000+25f000]
<6>device rtr1-et8 entered promiscuous mode
<6>perl[2606]: segfault at 0 ip 00000000f75a87a6 sp 00000000ffd4a930 error 4 in libperl.so[f7460000+25f000]
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>perl[2612]: segfault at 0 ip 00000000f75787a6 sp 00000000ff8ef510 error 4 in libperl.so[f7430000+25f000]
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>perl[2614]: segfault at 0 ip 00000000f757d7a6 sp 00000000ff95ac50 error 4 in libperl.so[f7435000+25f000]
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>perl[2628]: segfault at 0 ip 00000000f762b7a6 sp 00000000ff920700 error 4 in libperl.so[f74e3000+25f000]
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>perl[2630]: segfault at 0 ip 00000000f761a7a6 sp 00000000ff840800 error 4 in libperl.so[f74d2000+25f000]
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et26 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>perl[2634]: segfault at 0 ip 00000000f75947a6 sp 00000000ffddc0b0 error 4 in libperl.so[f744c000+25f000]
<6>device rtr1-et27 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>perl[2636]: segfault at 0 ip 00000000f76357a6 sp 00000000ffff2570 error 4 in libperl.so[f74ed000+25f000]
<6>device rtr1-et25 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et28 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>device rtr2-et8 entered promiscuous mode
<6>device rtr2-et9 entered promiscuous mode
<6>device rtr2-et2 entered promiscuous mode
<6>device rtr2-et3 entered promiscuous mode
<6>device rtr2-et1 entered promiscuous mode
<6>device rtr2-et6 entered promiscuous mode
<6>device rtr2-et7 entered promiscuous mode
<6>device rtr2-et4 entered promiscuous mode
<6>device rtr2-et5 entered promiscuous mode
<6>device rtr2-et21 entered promiscuous mode
<6>device rtr2-et26 entered promiscuous mode
<6>device rtr2-et15 entered promiscuous mode
<6>device rtr2-et23 entered promiscuous mode
<6>device rtr2-et27 entered promiscuous mode
<6>device rtr2-et17 entered promiscuous mode
<6>device rtr2-et25 entered promiscuous mode
<6>device rtr2-et24 entered promiscuous mode
<6>device rtr2-et28 entered promiscuous mode
<6>device rtr2-et18 entered promiscuous mode
<6>device rtr2-et19 entered promiscuous mode
<6>device rtr2-et14 entered promiscuous mode
<6>device rtr2-et20 entered promiscuous mode
<6>device rtr2-et16 entered promiscuous mode
<6>device rtr2-et22 entered promiscuous mode
<6>device rtr2-et10 entered promiscuous mode
<6>device rtr2-et11 entered promiscuous mode
<6>device rtr2-et12 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device rtr2-et13 entered promiscuous mode
<6>device host1-e0 entered promiscuous mode
<6>udev: starting version 145
<6>device fabric entered promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>device fabric left promiscuous mode
<6>device rtr2-et4 left promiscuous mode
<6>device rtr2-et7 left promiscuous mode
<6>device rtr2-et11 left promiscuous mode
<6>device rtr2-et15 left promiscuous mode
<6>device rtr2-et16 left promiscuous mode
<6>device rtr2-et18 left promiscuous mode
<6>device rtr2-et19 left promiscuous mode
<6>device rtr2-et22 left promiscuous mode
<6>device rtr2-et26 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et26 left promiscuous mode
<6>device rtr1-et28 left promiscuous mode
<6>device fabric entered promiscuous mode
<6>device fabric left promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device fabric entered promiscuous mode
<6>device fabric left promiscuous mode
<6>device host1-e0 left promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr2-et8 entered promiscuous mode
<6>device rtr2-et9 entered promiscuous mode
<6>device rtr2-et2 entered promiscuous mode
<6>device rtr2-et3 entered promiscuous mode
<6>device rtr2-et1 entered promiscuous mode
<6>device rtr2-et6 entered promiscuous mode
<6>device rtr2-et7 entered promiscuous mode
<6>device rtr2-et4 entered promiscuous mode
<6>device rtr2-et5 entered promiscuous mode
<4>show_signal_msg: 23 callbacks suppressed
<6>perl[7946]: segfault at 0 ip 00000000f76507a6 sp 00000000fff350b0 error 4 in libperl.so[f7508000+25f000]
<6>perl[7955]: segfault at 0 ip 00000000f75c17a6 sp 00000000ffa1f730 error 4 in libperl.so[f7479000+25f000]
<6>perl[7959]: segfault at 0 ip 00000000f75db7a6 sp 00000000ffe375a0 error 4 in libperl.so[f7493000+25f000]
<6>perl[7974]: segfault at 0 ip 00000000f763b7a6 sp 00000000ffa1e8c0 error 4 in libperl.so[f74f3000+25f000]
<6>perl[7976]: segfault at 0 ip 00000000f75df7a6 sp 00000000fffadde0 error 4 in libperl.so[f7497000+25f000]
<6>perl[7980]: segfault at 0 ip 00000000f76557a6 sp 00000000ffd77220 error 4 in libperl.so[f750d000+25f000]
<6>perl[7982]: segfault at 0 ip 00000000f755d7a6 sp 00000000ffeac960 error 4 in libperl.so[f7415000+25f000]
<6>perl[7986]: segfault at 0 ip 00000000f76367a6 sp 00000000ffd06970 error 4 in libperl.so[f74ee000+25f000]
<6>perl[7988]: segfault at 0 ip 00000000f76017a6 sp 00000000ffb42180 error 4 in libperl.so[f74b9000+25f000]
<6>perl[7990]: segfault at 0 ip 00000000f75707a6 sp 00000000ff8f9540 error 4 in libperl.so[f7428000+25f000]
<6>device rtr2-et1 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host1-e0 entered promiscuous mode
<6>udev: starting version 145
<6>device fabric entered promiscuous mode
<6>device fabric left promiscuous mode
<6>device host1-e0 left promiscuous mode
<6>device rtr3-et1 entered promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<4>show_signal_msg: 20 callbacks suppressed
<6>perl[9209]: segfault at 0 ip 00000000f75c47a6 sp 00000000ff908510 error 4 in libperl.so[f747c000+25f000]
<6>perl[9214]: segfault at 0 ip 00000000f75977a6 sp 00000000ffcee430 error 4 in libperl.so[f744f000+25f000]
<6>perl[9216]: segfault at 0 ip 00000000f758c7a6 sp 00000000ff8a3590 error 4 in libperl.so[f7444000+25f000]
<6>perl[9218]: segfault at ff267ffc ip 00000000f75b8dcc sp 00000000ff268000 error 6 in libperl.so[f74b5000+25f000]
<6>perl[9232]: segfault at 0 ip 00000000f75b27a6 sp 00000000ffb8af50 error 4 in libperl.so[f746a000+25f000]
<6>perl[9241]: segfault at 0 ip 00000000f75e47a6 sp 00000000ffdb9bc0 error 4 in libperl.so[f749c000+25f000]
<6>perl[9243]: segfault at 0 ip 00000000f75d37a6 sp 00000000ffa9fdc0 error 4 in libperl.so[f748b000+25f000]
<6>perl[9246]: segfault at 0 ip 00000000f75cd7a6 sp 00000000ff8fd8c0 error 4 in libperl.so[f7485000+25f000]
<6>perl[9248]: segfault at 0 ip 00000000f75f27a6 sp 00000000ff9c45f0 error 4 in libperl.so[f74aa000+25f000]
<6>perl[9251]: segfault at 0 ip 00000000f75c17a6 sp 00000000ff88a250 error 4 in libperl.so[f7479000+25f000]
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr2-et1 left promiscuous mode
<6>device rtr2-et2 left promiscuous mode
<6>device rtr2-et3 left promiscuous mode
<6>device rtr2-et5 left promiscuous mode
<6>device rtr2-et6 left promiscuous mode
<6>device rtr2-et7 left promiscuous mode
<6>device rtr2-et8 left promiscuous mode
<6>device rtr2-et9 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host1-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host2-e0 entered promiscuous mode
<6>device rtr2-et1 left promiscuous mode
<6>device rtr3-et1 left promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host3-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host4-e0 entered promiscuous mode
<6>udev: starting version 145
<6>device fabric entered promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>device fabric left promiscuous mode
<6>device host1-e0 left promiscuous mode
<6>device host2-e0 left promiscuous mode
<6>device host3-e0 left promiscuous mode
<6>device host4-e0 left promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>ADDRCONF(NETDEV_UP): Rib-i0-121: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): Rib-i0-121: link becomes ready
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et26 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et27 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et25 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et28 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr2-et1 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>device rtr2-et8 entered promiscuous mode
<6>device rtr2-et9 entered promiscuous mode
<6>device rtr2-et2 entered promiscuous mode
<6>device rtr2-et3 entered promiscuous mode
<6>device rtr2-et1 entered promiscuous mode
<6>device rtr2-et6 entered promiscuous mode
<6>device rtr2-et7 entered promiscuous mode
<6>device rtr2-et4 entered promiscuous mode
<6>device rtr2-et5 entered promiscuous mode
<6>device rtr2-et21 entered promiscuous mode
<6>device rtr2-et26 entered promiscuous mode
<6>device rtr2-et15 entered promiscuous mode
<6>device rtr2-et23 entered promiscuous mode
<6>device rtr2-et27 entered promiscuous mode
<6>device rtr2-et17 entered promiscuous mode
<6>device rtr2-et25 entered promiscuous mode
<6>device rtr2-et24 entered promiscuous mode
<6>device rtr2-et28 entered promiscuous mode
<6>device rtr2-et18 entered promiscuous mode
<6>device rtr2-et19 entered promiscuous mode
<6>device rtr2-et14 entered promiscuous mode
<6>device rtr2-et20 entered promiscuous mode
<6>device rtr2-et16 entered promiscuous mode
<6>device rtr2-et22 entered promiscuous mode
<6>device rtr2-et10 entered promiscuous mode
<6>device rtr2-et11 entered promiscuous mode
<6>device rtr2-et12 entered promiscuous mode
<6>device rtr2-et13 entered promiscuous mode
<6>device rtr3-et1 entered promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>device rtr2-et1 left promiscuous mode
<6>device rtr3-et1 left promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<7>ribd1-e1: no IPv6 routers present
<7>ribd1-e0: no IPv6 routers present
<7>ribd2-e1: no IPv6 routers present
<7>ribd2-e0: no IPv6 routers present
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host1-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host2-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>device ribd1-e0 entered promiscuous mode
<6>device ribd1-e1 entered promiscuous mode
<6>device ribd1-e1 left promiscuous mode
<6>device ribd1-e1 entered promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>device rtr2-et1 left promiscuous mode
<6>device rtr2-et2 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr2-et13 left promiscuous mode
<6>device rtr2-et3 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr2-et12 left promiscuous mode
<6>device rtr2-et4 left promiscuous mode
<6>device rtr2-et5 left promiscuous mode
<6>device rtr2-et11 left promiscuous mode
<6>device rtr2-et6 left promiscuous mode
<6>device rtr2-et7 left promiscuous mode
<6>device rtr2-et8 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr2-et10 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr2-et9 left promiscuous mode
<6>device rtr2-et22 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr2-et16 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device rtr2-et20 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr2-et15 left promiscuous mode
<6>device rtr2-et17 left promiscuous mode
<6>device rtr2-et18 left promiscuous mode
<6>device rtr2-et19 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr2-et21 left promiscuous mode
<6>device rtr2-et23 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr2-et24 left promiscuous mode
<6>device rtr2-et28 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr2-et25 left promiscuous mode
<6>device host1-e0 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr2-et26 left promiscuous mode
<6>device rtr2-et27 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device host2-e0 left promiscuous mode
<6>device rtr1-et25 left promiscuous mode
<6>device rtr1-et26 left promiscuous mode
<6>device rtr1-et27 left promiscuous mode
<6>device rtr1-et28 left promiscuous mode
<6>device ribd1-e1 left promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host1-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host2-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>device ribd1-e0 entered promiscuous mode
<6>device ribd1-e1 entered promiscuous mode
<6>device ribd1-e1 left promiscuous mode
<6>device ribd1-e1 entered promiscuous mode
<6>device host1-e0 left promiscuous mode
<6>device host2-e0 left promiscuous mode
<6>device ribd1-e1 left promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device rtr2-et1 entered promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>device rtr2-et8 entered promiscuous mode
<6>device rtr2-et9 entered promiscuous mode
<6>device rtr2-et2 entered promiscuous mode
<6>device rtr2-et3 entered promiscuous mode
<6>device rtr2-et1 entered promiscuous mode
<6>device rtr2-et6 entered promiscuous mode
<6>device rtr2-et7 entered promiscuous mode
<6>device rtr2-et4 entered promiscuous mode
<6>device rtr2-et5 entered promiscuous mode
<6>device rtr2-et14 entered promiscuous mode
<6>device rtr2-et15 entered promiscuous mode
<6>device rtr2-et10 entered promiscuous mode
<6>device rtr2-et11 entered promiscuous mode
<6>device rtr2-et12 entered promiscuous mode
<6>device rtr2-et13 entered promiscuous mode
<6>device rtr3-et1 entered promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>ADDRCONF(NETDEV_UP): RibBgp-i0-1108: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): RibBgp-i0-1108: link becomes ready
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr2-et1 left promiscuous mode
<6>device rtr3-et1 left promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host1-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host2-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>device ribd1-e0 entered promiscuous mode
<6>device ribd1-e1 entered promiscuous mode
<6>device ribd1-e1 left promiscuous mode
<6>device ribd1-e1 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host3-e0 entered promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device ribd2-e0 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device ribd2-e1 entered promiscuous mode
<6>device ribd2-e1 left promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device ribd2-e1 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>device host1-e0 left promiscuous mode
<6>device host2-e0 left promiscuous mode
<6>device rtr2-et1 entered promiscuous mode
<6>device ribd1-e1 left promiscuous mode
<6>device host3-e0 left promiscuous mode
<6>device ribd2-e1 left promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host1-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host2-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host3-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth2: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
<6>device ribd1-e0 entered promiscuous mode
<6>device ribd1-e1 entered promiscuous mode
<6>device ribd1-e2 entered promiscuous mode
<6>device ribd1-e2 left promiscuous mode
<6>device ribd1-e1 left promiscuous mode
<6>device ribd1-e1 entered promiscuous mode
<6>device ribd1-e2 entered promiscuous mode
<6>device ribd1-e2 left promiscuous mode
<6>device ribd1-e2 entered promiscuous mode
<6>device host1-e0 left promiscuous mode
<6>device host2-e0 left promiscuous mode
<6>device host3-e0 left promiscuous mode
<6>device ribd1-e2 left promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host1-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host2-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host3-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth2: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
<6>device ribd1-e0 entered promiscuous mode
<6>device ribd1-e1 entered promiscuous mode
<6>device ribd1-e2 entered promiscuous mode
<6>device ribd1-e2 left promiscuous mode
<6>device ribd1-e1 left promiscuous mode
<6>device ribd1-e1 entered promiscuous mode
<6>device ribd1-e2 entered promiscuous mode
<6>device ribd1-e2 left promiscuous mode
<6>device ribd1-e2 entered promiscuous mode
<6>device host1-e0 left promiscuous mode
<6>device host2-e0 left promiscuous mode
<6>device host3-e0 left promiscuous mode
<6>device ribd1-e2 left promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device rtr2-et1 left promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host1-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host2-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>device ribd1-e0 entered promiscuous mode
<6>device ribd1-e1 entered promiscuous mode
<6>device ribd1-e1 left promiscuous mode
<6>device ribd1-e1 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host1-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host2-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host3-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth2: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
<6>device ribd1-e0 entered promiscuous mode
<6>device ribd1-e1 entered promiscuous mode
<6>device ribd1-e2 entered promiscuous mode
<6>device ribd1-e2 left promiscuous mode
<6>device ribd1-e1 left promiscuous mode
<6>device ribd1-e1 entered promiscuous mode
<6>device ribd1-e2 entered promiscuous mode
<6>device ribd1-e2 left promiscuous mode
<6>device ribd1-e2 entered promiscuous mode
<6>device host1-e0 left promiscuous mode
<6>device host2-e0 left promiscuous mode
<6>device ribd1-e1 left promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host1-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host2-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>device ribd1-e0 entered promiscuous mode
<6>device ribd1-e1 entered promiscuous mode
<6>device ribd1-e1 left promiscuous mode
<6>device ribd1-e1 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host3-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>device ribd2-e0 entered promiscuous mode
<6>device ribd2-e1 entered promiscuous mode
<6>device ribd2-e1 left promiscuous mode
<6>device ribd2-e1 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host4-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>device ribd3-e0 entered promiscuous mode
<6>device ribd3-e1 entered promiscuous mode
<6>device ribd3-e1 left promiscuous mode
<6>device ribd3-e1 entered promiscuous mode
<6>device host1-e0 left promiscuous mode
<6>device host2-e0 left promiscuous mode
<6>device ribd1-e1 left promiscuous mode
<6>device host3-e0 left promiscuous mode
<6>device ribd2-e1 left promiscuous mode
<6>device host4-e0 left promiscuous mode
<6>device ribd3-e1 left promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>device host1-e0 left promiscuous mode
<6>device host2-e0 left promiscuous mode
<6>device host3-e0 left promiscuous mode
<6>device ribd1-e2 left promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device rtr2-et13 left promiscuous mode
<6>device rtr2-et4 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr2-et7 left promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host1-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host2-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>device ribd1-e0 entered promiscuous mode
<6>device ribd1-e1 entered promiscuous mode
<6>device ribd1-e1 left promiscuous mode
<6>device ribd1-e1 entered promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>device rtr2-et2 entered promiscuous mode
<6>device rtr2-et3 entered promiscuous mode
<6>device rtr2-et1 entered promiscuous mode
<6>device rtr2-et6 entered promiscuous mode
<6>device rtr2-et4 entered promiscuous mode
<6>device rtr2-et5 entered promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device host1-e0 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device host2-e0 left promiscuous mode
<6>device ribd1-e1 left promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>ADDRCONF(NETDEV_UP): e12: link is not ready
<6>ADDRCONF(NETDEV_UP): e23: link is not ready
<6>ADDRCONF(NETDEV_UP): e1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): e1: link becomes ready
<6>ADDRCONF(NETDEV_UP): e2: link is not ready
<6>ADDRCONF(NETDEV_UP): e3: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): e3: link becomes ready
<6>ADDRCONF(NETDEV_CHANGE): e12: link becomes ready
<6>ADDRCONF(NETDEV_CHANGE): e2: link becomes ready
<6>ADDRCONF(NETDEV_CHANGE): e23: link becomes ready
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr2-et1 left promiscuous mode
<6>device rtr2-et2 left promiscuous mode
<6>device rtr2-et3 left promiscuous mode
<6>device rtr2-et4 left promiscuous mode
<6>device rtr2-et5 left promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<1>BUG: Bad page map in process [manager]  pte:ffff880282177748 pmd:282177067
<1>addr:00000000f50e9000 vm_flags:08000075 anon_vma:          (null) mapping:ffff8801ec94dcf8 index:128
<1>vma->vm_ops->fault: filemap_fault+0x0/0x351
<1>vma->vm_file->f_op->mmap: ext4_file_mmap+0x0/0x4f
<4>Pid: 20778, comm: [manager] Not tainted 2.6.38-rc4-357643.2010AroraKernelBeta.fc14.x86_64 #1
<4>Call Trace:
<4> [<ffffffff810c92c0>] ? print_bad_pte+0x19e/0x1b7
<4> [<ffffffff810ca056>] ? vm_normal_page+0x4b/0x82
<4> [<ffffffff810cacca>] ? unmap_vmas+0x39f/0x75e
<4> [<ffffffff810d0239>] ? exit_mmap+0x9d/0x114
<4> [<ffffffff8103c4a6>] ? mmput+0x43/0xe6
<4> [<ffffffff810419e4>] ? exit_mm+0x134/0x141
<4> [<ffffffff813d0dbc>] ? _raw_spin_lock_irq+0x1a/0x1c
<4> [<ffffffff81041c1d>] ? do_exit+0x22c/0x7a6
<4> [<ffffffff8104240e>] ? do_group_exit+0x74/0x9c
<4> [<ffffffff81042448>] ? sys_exit_group+0x12/0x16
<4> [<ffffffff8102cd90>] ? sysenter_dispatch+0x7/0x2e
<4>Disabling lock debugging due to kernel taint
<1>BUG: Bad page map in process [manager]  pte:ffff880282177748 pmd:282177067
<1>addr:00000000f50ea000 vm_flags:08000075 anon_vma:          (null) mapping:ffff8801ec94dcf8 index:129
<1>vma->vm_ops->fault: filemap_fault+0x0/0x351
<1>vma->vm_file->f_op->mmap: ext4_file_mmap+0x0/0x4f
<4>Pid: 20778, comm: [manager] Tainted: G    B       2.6.38-rc4-357643.2010AroraKernelBeta.fc14.x86_64 #1
<4>Call Trace:
<4> [<ffffffff810c92c0>] ? print_bad_pte+0x19e/0x1b7
<4> [<ffffffff810ca056>] ? vm_normal_page+0x4b/0x82
<4> [<ffffffff810cacca>] ? unmap_vmas+0x39f/0x75e
<4> [<ffffffff810d0239>] ? exit_mmap+0x9d/0x114
<4> [<ffffffff8103c4a6>] ? mmput+0x43/0xe6
<4> [<ffffffff810419e4>] ? exit_mm+0x134/0x141
<4> [<ffffffff813d0dbc>] ? _raw_spin_lock_irq+0x1a/0x1c
<4> [<ffffffff81041c1d>] ? do_exit+0x22c/0x7a6
<4> [<ffffffff8104240e>] ? do_group_exit+0x74/0x9c
<4> [<ffffffff81042448>] ? sys_exit_group+0x12/0x16
<4> [<ffffffff8102cd90>] ? sysenter_dispatch+0x7/0x2e
<1>BUG: Bad page map in process [manager]  pte:ffff880192d85748 pmd:192d85067
<1>addr:00000000f66e9000 vm_flags:08000075 anon_vma:          (null) mapping:ffff880220316af8 index:e4
<1>vma->vm_ops->fault: filemap_fault+0x0/0x351
<1>vma->vm_file->f_op->mmap: ext4_file_mmap+0x0/0x4f
<4>Pid: 20778, comm: [manager] Tainted: G    B       2.6.38-rc4-357643.2010AroraKernelBeta.fc14.x86_64 #1
<4>Call Trace:
<4> [<ffffffff810c92c0>] ? print_bad_pte+0x19e/0x1b7
<4> [<ffffffff810ca056>] ? vm_normal_page+0x4b/0x82
<4> [<ffffffff810cacca>] ? unmap_vmas+0x39f/0x75e
<4> [<ffffffff810d0239>] ? exit_mmap+0x9d/0x114
<4> [<ffffffff8103c4a6>] ? mmput+0x43/0xe6
<4> [<ffffffff810419e4>] ? exit_mm+0x134/0x141
<4> [<ffffffff813d0dbc>] ? _raw_spin_lock_irq+0x1a/0x1c
<4> [<ffffffff81041c1d>] ? do_exit+0x22c/0x7a6
<4> [<ffffffff8104240e>] ? do_group_exit+0x74/0x9c
<4> [<ffffffff81042448>] ? sys_exit_group+0x12/0x16
<4> [<ffffffff8102cd90>] ? sysenter_dispatch+0x7/0x2e
<1>BUG: Bad page map in process [manager]  pte:ffff880192d85748 pmd:192d85067
<1>addr:00000000f66ea000 vm_flags:08000075 anon_vma:          (null) mapping:ffff880220316af8 index:e5
<1>vma->vm_ops->fault: filemap_fault+0x0/0x351
<1>vma->vm_file->f_op->mmap: ext4_file_mmap+0x0/0x4f
<4>Pid: 20778, comm: [manager] Tainted: G    B       2.6.38-rc4-357643.2010AroraKernelBeta.fc14.x86_64 #1
<4>Call Trace:
<4> [<ffffffff810c92c0>] ? print_bad_pte+0x19e/0x1b7
<4> [<ffffffff810ca056>] ? vm_normal_page+0x4b/0x82
<4> [<ffffffff810cacca>] ? unmap_vmas+0x39f/0x75e
<4> [<ffffffff810d0239>] ? exit_mmap+0x9d/0x114
<4> [<ffffffff8103c4a6>] ? mmput+0x43/0xe6
<4> [<ffffffff810419e4>] ? exit_mm+0x134/0x141
<4> [<ffffffff813d0dbc>] ? _raw_spin_lock_irq+0x1a/0x1c
<4> [<ffffffff81041c1d>] ? do_exit+0x22c/0x7a6
<4> [<ffffffff8104240e>] ? do_group_exit+0x74/0x9c
<4> [<ffffffff81042448>] ? sys_exit_group+0x12/0x16
<4> [<ffffffff8102cd90>] ? sysenter_dispatch+0x7/0x2e
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device ribd1-e0 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device ribd2-e0 entered promiscuous mode
<6>device rtr2-et2 entered promiscuous mode
<6>device rtr2-et3 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>device rtr2-et1 entered promiscuous mode
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device rtr2-et6 entered promiscuous mode
<6>device rtr2-et4 entered promiscuous mode
<6>device ribd3-e0 entered promiscuous mode
<6>device rtr2-et5 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device ribd1-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>device ribd1-e0 entered promiscuous mode
<6>device ribd1-e1 entered promiscuous mode
<6>device ribd1-e1 left promiscuous mode
<6>device ribd1-e1 entered promiscuous mode
<6>device ribd1-e0 left promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device ribd1-e1 left promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>device rtr1-et2 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth2: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth3: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
<6>device rtr1-et6 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth4: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth4: link becomes ready
<6>device rtr1-et7 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth5: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth5: link becomes ready
<6>device rtr1-et4 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth6: link is not ready
<6>device rtr1-et5 entered promiscuous mode
<6>ADDRCONF(NETDEV_CHANGE): eth6: link becomes ready
<6>device rtr1-et21 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth7: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth7: link becomes ready
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth8: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth8: link becomes ready
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth9: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth9: link becomes ready
<6>device rtr1-et18 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth10: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth10: link becomes ready
<6>device rtr1-et19 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth11: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth11: link becomes ready
<6>device rtr1-et14 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth12: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth12: link becomes ready
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth13: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth13: link becomes ready
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth14: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth14: link becomes ready
<6>device rtr1-et11 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth15: link is not ready
<6>device rtr1-et12 entered promiscuous mode
<6>ADDRCONF(NETDEV_CHANGE): eth15: link becomes ready
<6>device rtr1-et13 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth16: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth16: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth17: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth17: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth18: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth18: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth19: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth19: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth20: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth20: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth21: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth21: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth22: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth22: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth23: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth23: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth24: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth24: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth25: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth25: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth26: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth26: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth27: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth27: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth28: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth28: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth29: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth29: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth30: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth30: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth31: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth31: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth32: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth32: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth33: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth33: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth34: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth34: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth35: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth35: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth36: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth36: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth37: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth37: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth38: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth38: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth39: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth39: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth40: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth40: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth41: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth41: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth42: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth42: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth43: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth43: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth44: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth44: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth45: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth45: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth46: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth46: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth47: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth47: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth48: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth48: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth49: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth49: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth50: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth50: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth51: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth51: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth52: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth52: link becomes ready
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth53: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth53: link becomes ready
<6>device rtr1-et2 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth54: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth54: link becomes ready
<6>device rtr1-et3 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth55: link is not ready
<6>device rtr1-et1 entered promiscuous mode
<6>ADDRCONF(NETDEV_CHANGE): eth55: link becomes ready
<6>device rtr1-et6 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth56: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth56: link becomes ready
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth57: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth57: link becomes ready
<6>device rtr1-et5 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth58: link is not ready
<6>device rtr1-et21 entered promiscuous mode
<6>ADDRCONF(NETDEV_CHANGE): eth58: link becomes ready
<6>device rtr1-et15 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth59: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth59: link becomes ready
<6>device rtr1-et16 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth60: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth60: link becomes ready
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth61: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth61: link becomes ready
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth62: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth62: link becomes ready
<6>device rtr1-et14 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth63: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth63: link becomes ready
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<7>ribd1-e2: no IPv6 routers present
<7>ribd1-e3: no IPv6 routers present
<7>ribd1-e0: no IPv6 routers present
<7>ribd1-e1: no IPv6 routers present
<7>ribd1-e4: no IPv6 routers present
<7>ribd1-e7: no IPv6 routers present
<7>ribd1-e5: no IPv6 routers present
<7>ribd1-e6: no IPv6 routers present
<7>ribd1-e12: no IPv6 routers present
<7>ribd1-e10: no IPv6 routers present
<7>ribd1-e13: no IPv6 routers present
<7>ribd1-e8: no IPv6 routers present
<7>ribd1-e9: no IPv6 routers present
<7>ribd1-e17: no IPv6 routers present
<7>ribd1-e14: no IPv6 routers present
<7>ribd1-e16: no IPv6 routers present
<7>ribd1-e15: no IPv6 routers present
<7>ribd1-e11: no IPv6 routers present
<7>ribd1-e21: no IPv6 routers present
<7>ribd1-e22: no IPv6 routers present
<7>ribd1-e20: no IPv6 routers present
<7>ribd1-e23: no IPv6 routers present
<7>ribd1-e18: no IPv6 routers present
<7>ribd1-e24: no IPv6 routers present
<7>ribd1-e19: no IPv6 routers present
<7>ribd1-e25: no IPv6 routers present
<7>ribd1-e31: no IPv6 routers present
<7>ribd1-e28: no IPv6 routers present
<7>ribd1-e27: no IPv6 routers present
<7>ribd1-e26: no IPv6 routers present
<7>ribd1-e33: no IPv6 routers present
<7>ribd1-e30: no IPv6 routers present
<7>ribd1-e29: no IPv6 routers present
<7>ribd1-e32: no IPv6 routers present
<7>ribd1-e37: no IPv6 routers present
<7>ribd1-e35: no IPv6 routers present
<7>ribd1-e34: no IPv6 routers present
<7>ribd1-e39: no IPv6 routers present
<7>ribd1-e38: no IPv6 routers present
<7>ribd1-e36: no IPv6 routers present
<7>ribd1-e40: no IPv6 routers present
<7>ribd1-e45: no IPv6 routers present
<6>device rtr2-et1 left promiscuous mode
<7>ribd1-e43: no IPv6 routers present
<7>ribd1-e46: no IPv6 routers present
<6>device rtr2-et2 left promiscuous mode
<7>ribd1-e42: no IPv6 routers present
<7>ribd1-e44: no IPv6 routers present
<7>ribd1-e41: no IPv6 routers present
<6>device rtr2-et3 left promiscuous mode
<6>device rtr2-et4 left promiscuous mode
<7>ribd1-e52: no IPv6 routers present
<6>device rtr2-et6 left promiscuous mode
<7>ribd1-e51: no IPv6 routers present
<7>ribd1-e50: no IPv6 routers present
<7>ribd1-e53: no IPv6 routers present
<7>ribd1-e47: no IPv6 routers present
<7>ribd1-e48: no IPv6 routers present
<7>ribd1-e49: no IPv6 routers present
<7>ribd1-e54: no IPv6 routers present
<6>device rtr1-et1 left promiscuous mode
<7>ribd1-e57: no IPv6 routers present
<6>device rtr1-et2 left promiscuous mode
<7>ribd1-e55: no IPv6 routers present
<7>ribd1-e56: no IPv6 routers present
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<7>ribd1-e59: no IPv6 routers present
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<7>ribd1-e61: no IPv6 routers present
<7>ribd1-e60: no IPv6 routers present
<7>ribd1-e62: no IPv6 routers present
<7>ribd1-e58: no IPv6 routers present
<7>ribd1-e63: no IPv6 routers present
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>device ribd1-e0 entered promiscuous mode
<6>device ribd1-e1 entered promiscuous mode
<6>device ribd1-e1 left promiscuous mode
<6>device ribd1-e1 entered promiscuous mode
<6>device ribd1-e0 left promiscuous mode
<6>device ribd2-e0 left promiscuous mode
<6>device ribd3-e0 left promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr2-et2 entered promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr2-et1 entered promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device rtr3-et2 entered promiscuous mode
<6>device rtr3-et1 entered promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>device rtr2-et8 entered promiscuous mode
<6>device rtr2-et9 entered promiscuous mode
<6>device rtr2-et2 entered promiscuous mode
<6>device rtr2-et3 entered promiscuous mode
<6>device rtr2-et1 entered promiscuous mode
<6>device rtr2-et6 entered promiscuous mode
<6>device rtr2-et7 entered promiscuous mode
<6>device rtr2-et4 entered promiscuous mode
<6>device rtr2-et5 entered promiscuous mode
<6>device rtr2-et10 entered promiscuous mode
<6>device rtr2-et11 entered promiscuous mode
<6>device rtr2-et12 entered promiscuous mode
<6>device rtr2-et13 entered promiscuous mode
<6>device rtr2-et1 left promiscuous mode
<6>device rtr2-et2 left promiscuous mode
<6>device rtr3-et1 left promiscuous mode
<6>device rtr3-et2 left promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth2: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth3: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth2: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth3: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth2: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth3: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
<7>ribd1-e0: no IPv6 routers present
<7>ribd1-e2: no IPv6 routers present
<7>ribd1-e3: no IPv6 routers present
<7>ribd1-e1: no IPv6 routers present
<7>ribd2-e1: no IPv6 routers present
<7>ribd2-e2: no IPv6 routers present
<7>ribd2-e3: no IPv6 routers present
<7>ribd2-e0: no IPv6 routers present
<7>ribd3-e0: no IPv6 routers present
<7>ribd3-e1: no IPv6 routers present
<7>ribd3-e3: no IPv6 routers present
<7>ribd3-e2: no IPv6 routers present
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device rtr1-et11 entered promiscuous mode
<6>device ribd1-e0 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device ribd2-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device ribd3-e0 entered promiscuous mode
<6>device ribd1-e0 left promiscuous mode
<6>device rtr2-et9 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device ribd2-e0 left promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device ribd3-e0 left promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et30 entered promiscuous mode
<6>device rtr1-et31 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>device rtr1-et32 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et29 entered promiscuous mode
<6>device rtr1-et28 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et25 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et27 entered promiscuous mode
<6>device rtr1-et26 entered promiscuous mode
<6>device rtr2-et8 entered promiscuous mode
<6>device rtr2-et9 entered promiscuous mode
<6>device rtr2-et2 entered promiscuous mode
<6>device rtr2-et3 entered promiscuous mode
<6>device rtr2-et1 entered promiscuous mode
<6>device rtr2-et6 entered promiscuous mode
<6>device rtr2-et7 entered promiscuous mode
<6>device rtr2-et4 entered promiscuous mode
<6>device rtr2-et5 entered promiscuous mode
<6>device rtr2-et18 entered promiscuous mode
<6>device rtr2-et19 entered promiscuous mode
<6>device rtr2-et14 entered promiscuous mode
<6>device rtr2-et15 entered promiscuous mode
<6>device rtr2-et30 entered promiscuous mode
<6>device rtr2-et31 entered promiscuous mode
<6>device rtr2-et10 entered promiscuous mode
<6>device rtr2-et11 entered promiscuous mode
<6>device rtr2-et12 entered promiscuous mode
<6>device rtr2-et13 entered promiscuous mode
<6>device rtr2-et32 entered promiscuous mode
<6>device rtr2-et16 entered promiscuous mode
<6>device rtr2-et17 entered promiscuous mode
<6>device rtr2-et29 entered promiscuous mode
<6>device rtr2-et28 entered promiscuous mode
<6>device rtr2-et21 entered promiscuous mode
<6>device rtr2-et20 entered promiscuous mode
<6>device rtr2-et23 entered promiscuous mode
<6>device rtr2-et22 entered promiscuous mode
<6>device rtr2-et25 entered promiscuous mode
<6>device rtr2-et24 entered promiscuous mode
<6>device rtr2-et27 entered promiscuous mode
<6>device rtr2-et26 entered promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device rtr2-et1 entered promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth2: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth3: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth4: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth4: link becomes ready
<6>device ribd1-e0 entered promiscuous mode
<6>device ribd1-e1 entered promiscuous mode
<6>device ribd1-e2 entered promiscuous mode
<6>device ribd1-e3 entered promiscuous mode
<6>device ribd1-e4 entered promiscuous mode
<6>device ribd1-e4 left promiscuous mode
<6>device ribd1-e3 left promiscuous mode
<6>device ribd1-e2 left promiscuous mode
<6>device ribd1-e1 left promiscuous mode
<6>device ribd1-e1 entered promiscuous mode
<6>device ribd1-e2 entered promiscuous mode
<6>device ribd1-e3 entered promiscuous mode
<6>device ribd1-e4 entered promiscuous mode
<6>device ribd1-e4 left promiscuous mode
<6>device ribd1-e3 left promiscuous mode
<6>device ribd1-e2 left promiscuous mode
<6>device ribd1-e2 entered promiscuous mode
<6>device ribd1-e3 entered promiscuous mode
<6>device ribd1-e4 entered promiscuous mode
<6>device ribd1-e4 left promiscuous mode
<6>device ribd1-e3 left promiscuous mode
<6>device ribd1-e3 entered promiscuous mode
<6>device ribd1-e4 entered promiscuous mode
<6>device ribd1-e4 left promiscuous mode
<6>device ribd1-e4 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth2: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth3: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth4: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth4: link becomes ready
<6>device ribd2-e0 entered promiscuous mode
<6>device ribd2-e1 entered promiscuous mode
<6>device ribd2-e2 entered promiscuous mode
<6>device ribd2-e3 entered promiscuous mode
<6>device ribd2-e4 entered promiscuous mode
<6>device ribd2-e4 left promiscuous mode
<6>device ribd2-e3 left promiscuous mode
<6>device ribd2-e2 left promiscuous mode
<6>device ribd2-e1 left promiscuous mode
<6>device ribd2-e1 entered promiscuous mode
<6>device ribd2-e2 entered promiscuous mode
<6>device ribd2-e3 entered promiscuous mode
<6>device ribd2-e4 entered promiscuous mode
<6>device ribd2-e4 left promiscuous mode
<6>device ribd2-e3 left promiscuous mode
<6>device ribd2-e2 left promiscuous mode
<6>device ribd2-e2 entered promiscuous mode
<6>device ribd2-e3 entered promiscuous mode
<6>device ribd2-e4 entered promiscuous mode
<6>device ribd2-e4 left promiscuous mode
<6>device ribd2-e3 left promiscuous mode
<6>device ribd2-e3 entered promiscuous mode
<6>device ribd2-e4 entered promiscuous mode
<6>device ribd2-e4 left promiscuous mode
<6>device ribd2-e4 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth2: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth3: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth4: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth4: link becomes ready
<6>device ribd3-e0 entered promiscuous mode
<6>device ribd3-e1 entered promiscuous mode
<6>device ribd3-e2 entered promiscuous mode
<6>device ribd3-e3 entered promiscuous mode
<6>device ribd3-e4 entered promiscuous mode
<6>device ribd3-e4 left promiscuous mode
<6>device ribd3-e3 left promiscuous mode
<6>device ribd3-e2 left promiscuous mode
<6>device ribd3-e1 left promiscuous mode
<6>device ribd3-e1 entered promiscuous mode
<6>device ribd3-e2 entered promiscuous mode
<6>device ribd3-e3 entered promiscuous mode
<6>device ribd3-e4 entered promiscuous mode
<6>device ribd3-e4 left promiscuous mode
<6>device ribd3-e3 left promiscuous mode
<6>device ribd3-e2 left promiscuous mode
<6>device ribd3-e2 entered promiscuous mode
<6>device ribd3-e3 entered promiscuous mode
<6>device ribd3-e4 entered promiscuous mode
<6>device ribd3-e4 left promiscuous mode
<6>device ribd3-e3 left promiscuous mode
<6>device ribd3-e3 entered promiscuous mode
<6>device ribd3-e4 entered promiscuous mode
<6>device ribd3-e4 left promiscuous mode
<6>device ribd3-e4 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth2: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
<6>device ribd4-e0 entered promiscuous mode
<6>device ribd4-e1 entered promiscuous mode
<6>device ribd4-e2 entered promiscuous mode
<6>device ribd4-e2 left promiscuous mode
<6>device ribd4-e1 left promiscuous mode
<6>device ribd4-e1 entered promiscuous mode
<6>device ribd4-e2 entered promiscuous mode
<6>device ribd4-e2 left promiscuous mode
<6>device ribd4-e2 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth2: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
<6>device ribd5-e0 entered promiscuous mode
<6>device ribd5-e1 entered promiscuous mode
<6>device ribd5-e2 entered promiscuous mode
<6>device ribd5-e2 left promiscuous mode
<6>device ribd5-e1 left promiscuous mode
<6>device ribd5-e1 entered promiscuous mode
<6>device ribd5-e2 entered promiscuous mode
<6>device ribd5-e2 left promiscuous mode
<6>device ribd5-e2 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth2: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
<6>device ribd6-e0 entered promiscuous mode
<6>device ribd6-e1 entered promiscuous mode
<6>device ribd6-e2 entered promiscuous mode
<6>device ribd6-e2 left promiscuous mode
<6>device ribd6-e1 left promiscuous mode
<6>device ribd6-e1 entered promiscuous mode
<6>device ribd6-e2 entered promiscuous mode
<6>device ribd6-e2 left promiscuous mode
<6>device ribd6-e2 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth2: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
<6>device ribd7-e0 entered promiscuous mode
<6>device ribd7-e1 entered promiscuous mode
<6>device ribd7-e2 entered promiscuous mode
<6>device ribd7-e2 left promiscuous mode
<6>device ribd7-e1 left promiscuous mode
<6>device ribd7-e1 entered promiscuous mode
<6>device ribd7-e2 entered promiscuous mode
<6>device ribd7-e2 left promiscuous mode
<6>device ribd7-e2 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host1-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host2-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host3-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host4-e0 entered promiscuous mode
<4>modprobe used greatest stack depth: 3440 bytes left
<6>device rtr1-et22 left promiscuous mode
<6>device rtr2-et30 left promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host1-e0 entered promiscuous mode
<6>device ribd1-e1 left promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host2-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host3-e0 entered promiscuous mode
<7>UDP: short packet: From 171.64.90.1:12589 12850/512 to 10.10.1.2:25972
<7>UDP: short packet: From 171.64.90.1:12332 12332/512 to 10.10.1.0:12332
<7>UDP: short packet: From 171.64.90.1:12332 12332/512 to 10.10.1.1:12332
<7>UDP: short packet: From 171.64.90.1:12332 12332/512 to 10.10.1.255:12332
<7>UDP: short packet: From 171.64.90.1:29300 18895/512 to 10.10.3.2:29233
<7>UDP: short packet: From 171.64.90.1:40152 0/512 to 10.10.3.2:19209
<7>UDP: short packet: From 171.64.90.1:0 0/512 to 10.10.1.2:0
<7>UDP: short packet: From 171.64.90.1:22644 40152/900 to 10.10.1.2:34314
<6>device host1-e0 left promiscuous mode
<6>device host2-e0 left promiscuous mode
<6>device host3-e0 left promiscuous mode
<6>device ribd1-e4 left promiscuous mode
<6>device ribd2-e4 left promiscuous mode
<6>device ribd3-e4 left promiscuous mode
<6>device ribd4-e2 left promiscuous mode
<6>device ribd5-e2 left promiscuous mode
<6>device ribd6-e2 left promiscuous mode
<6>device ribd7-e2 left promiscuous mode
<6>device host1-e0 left promiscuous mode
<6>device host2-e0 left promiscuous mode
<6>device host3-e0 left promiscuous mode
<6>device host4-e0 left promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth2: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth3: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
<6>device ribd1-e0 entered promiscuous mode
<6>device ribd1-e1 entered promiscuous mode
<6>device ribd1-e2 entered promiscuous mode
<6>device ribd1-e3 entered promiscuous mode
<6>device ribd1-e3 left promiscuous mode
<6>device ribd1-e2 left promiscuous mode
<6>device ribd1-e1 left promiscuous mode
<6>device ribd1-e1 entered promiscuous mode
<6>device ribd1-e2 entered promiscuous mode
<6>device ribd1-e3 entered promiscuous mode
<6>device ribd1-e3 left promiscuous mode
<6>device ribd1-e2 left promiscuous mode
<6>device ribd1-e2 entered promiscuous mode
<6>device ribd1-e3 entered promiscuous mode
<6>device ribd1-e3 left promiscuous mode
<6>device ribd1-e3 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth2: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
<6>device ribd2-e0 entered promiscuous mode
<6>device ribd2-e1 entered promiscuous mode
<6>device ribd2-e2 entered promiscuous mode
<6>device ribd2-e2 left promiscuous mode
<6>device ribd2-e1 left promiscuous mode
<6>device ribd2-e1 entered promiscuous mode
<6>device ribd2-e2 entered promiscuous mode
<6>device ribd2-e2 left promiscuous mode
<6>device ribd2-e2 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth2: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
<6>device host1-e0 entered promiscuous mode
<6>device ribd3-e0 entered promiscuous mode
<6>device ribd3-e1 entered promiscuous mode
<6>device ribd3-e2 entered promiscuous mode
<6>device ribd3-e2 left promiscuous mode
<6>device ribd3-e1 left promiscuous mode
<6>device ribd3-e1 entered promiscuous mode
<6>device ribd3-e2 entered promiscuous mode
<6>device ribd3-e2 left promiscuous mode
<6>device ribd3-e2 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host2-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host1-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host2-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host3-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device ribd1-e0 entered promiscuous mode
<6>device host4-e0 entered promiscuous mode
<6>device ribd1-e1 entered promiscuous mode
<6>device ribd1-e1 left promiscuous mode
<6>device ribd1-e1 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host3-e0 entered promiscuous mode
<6>device rtr2-et1 left promiscuous mode
<4>Sysdb used greatest stack depth: 3216 bytes left
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device ribd1-e3 left promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et26 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et27 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et25 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et28 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device ribd2-e2 left promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>device rtr2-et8 entered promiscuous mode
<6>device rtr2-et9 entered promiscuous mode
<6>device rtr2-et2 entered promiscuous mode
<6>device ribd3-e2 left promiscuous mode
<6>device rtr2-et3 entered promiscuous mode
<6>device rtr2-et1 entered promiscuous mode
<6>device host1-e0 left promiscuous mode
<6>device rtr2-et6 entered promiscuous mode
<6>device host2-e0 left promiscuous mode
<6>device rtr2-et7 entered promiscuous mode
<6>device host3-e0 left promiscuous mode
<6>device rtr2-et4 entered promiscuous mode
<6>device host4-e0 left promiscuous mode
<6>device rtr2-et5 entered promiscuous mode
<6>device rtr2-et21 entered promiscuous mode
<6>device rtr2-et26 entered promiscuous mode
<6>device rtr2-et15 entered promiscuous mode
<6>device rtr2-et23 entered promiscuous mode
<6>device rtr2-et27 entered promiscuous mode
<6>device rtr2-et17 entered promiscuous mode
<6>device rtr2-et25 entered promiscuous mode
<6>device rtr2-et24 entered promiscuous mode
<6>device rtr2-et28 entered promiscuous mode
<6>device rtr2-et18 entered promiscuous mode
<6>device rtr2-et19 entered promiscuous mode
<6>device rtr2-et14 entered promiscuous mode
<6>device rtr2-et20 entered promiscuous mode
<6>device rtr2-et16 entered promiscuous mode
<6>device rtr2-et22 entered promiscuous mode
<6>device rtr2-et10 entered promiscuous mode
<6>device rtr2-et11 entered promiscuous mode
<6>device rtr2-et12 entered promiscuous mode
<6>device rtr2-et13 entered promiscuous mode
<6>device etba1-et2 entered promiscuous mode
<6>device etba1-et3 entered promiscuous mode
<6>device etba1-et1 entered promiscuous mode
<4>IgmpSnooping used greatest stack depth: 3184 bytes left
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et26 left promiscuous mode
<6>device rtr2-et10 left promiscuous mode
<6>device rtr2-et22 left promiscuous mode
<6>device rtr2-et21 left promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth2: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
<6>device ribd1-e0 entered promiscuous mode
<6>device ribd1-e1 entered promiscuous mode
<6>device ribd1-e2 entered promiscuous mode
<6>device ribd1-e2 left promiscuous mode
<6>device ribd1-e1 left promiscuous mode
<6>device ribd1-e1 entered promiscuous mode
<6>device ribd1-e2 entered promiscuous mode
<6>device ribd1-e2 left promiscuous mode
<6>device ribd1-e2 entered promiscuous mode
<6>device rtr2-et2 entered promiscuous mode
<6>device rtr2-et3 entered promiscuous mode
<6>device rtr2-et1 entered promiscuous mode
<6>device rtr2-et4 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host1-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host2-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host3-e0 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr2-et2 entered promiscuous mode
<6>device rtr2-et3 entered promiscuous mode
<6>device rtr2-et1 entered promiscuous mode
<6>device rtr2-et6 entered promiscuous mode
<6>device rtr2-et4 entered promiscuous mode
<6>device rtr2-et5 entered promiscuous mode
<6>device host1-e0 left promiscuous mode
<6>device host2-e0 left promiscuous mode
<6>device ribd1-e1 left promiscuous mode
<6>device host3-e0 left promiscuous mode
<6>device etba1-et1 left promiscuous mode
<6>device etba1-et2 left promiscuous mode
<6>device etba1-et3 left promiscuous mode
<6>device rtr2-et1 left promiscuous mode
<6>device rtr2-et2 left promiscuous mode
<6>device rtr2-et3 left promiscuous mode
<6>device rtr2-et5 left promiscuous mode
<6>device rtr2-et6 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>ADDRCONF(NETDEV_UP): RO-i0-961: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): RO-i0-961: link becomes ready
<4>show_signal_msg: 24 callbacks suppressed
<6>cliribd[29539]: segfault at 5f ip 000000000805a61c sp 00000000ffe2c710 error 4 in cliribd[8048000+ef000]
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device ribd1-e2 left promiscuous mode
<6>device rtr2-et1 left promiscuous mode
<6>device rtr2-et2 left promiscuous mode
<6>device rtr2-et3 left promiscuous mode
<6>device rtr2-et4 left promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device host1-e0 left promiscuous mode
<6>device host2-e0 left promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device host3-e0 left promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr2-et2 entered promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr2-et3 entered promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr2-et1 entered promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr2-et6 entered promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr2-et4 entered promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr2-et5 entered promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device etba1-et8 entered promiscuous mode
<6>device etba1-et9 entered promiscuous mode
<6>device etba1-et2 entered promiscuous mode
<6>device etba1-et3 entered promiscuous mode
<6>device etba1-et1 entered promiscuous mode
<6>device etba1-et6 entered promiscuous mode
<6>device etba1-et7 entered promiscuous mode
<6>device etba1-et4 entered promiscuous mode
<6>device etba1-et5 entered promiscuous mode
<6>device etba1-et21 entered promiscuous mode
<6>device etba1-et15 entered promiscuous mode
<6>device etba1-et16 entered promiscuous mode
<6>device etba1-et22 entered promiscuous mode
<6>device etba1-et24 entered promiscuous mode
<6>device etba1-et18 entered promiscuous mode
<6>device etba1-et19 entered promiscuous mode
<6>device etba1-et14 entered promiscuous mode
<6>device etba1-et20 entered promiscuous mode
<6>device etba1-et23 entered promiscuous mode
<6>device etba1-et17 entered promiscuous mode
<6>device etba1-et10 entered promiscuous mode
<6>device etba1-et11 entered promiscuous mode
<6>device etba1-et12 entered promiscuous mode
<6>device etba1-et13 entered promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr2-et2 left promiscuous mode
<6>device rtr2-et3 left promiscuous mode
<6>device rtr2-et4 left promiscuous mode
<6>device rtr2-et5 left promiscuous mode
<6>device rtr2-et6 left promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>device etba1-et8 left promiscuous mode
<6>device etba1-et9 left promiscuous mode
<6>device etba1-et2 left promiscuous mode
<6>device etba1-et3 left promiscuous mode
<6>device etba1-et1 left promiscuous mode
<6>device etba1-et6 left promiscuous mode
<6>device etba1-et7 left promiscuous mode
<6>device etba1-et4 left promiscuous mode
<6>device etba1-et5 left promiscuous mode
<6>device etba1-et14 left promiscuous mode
<6>device etba1-et15 left promiscuous mode
<6>device etba1-et23 left promiscuous mode
<6>device etba1-et17 left promiscuous mode
<6>device etba1-et24 left promiscuous mode
<6>device etba1-et18 left promiscuous mode
<6>device etba1-et19 left promiscuous mode
<6>device etba1-et21 left promiscuous mode
<6>device etba1-et20 left promiscuous mode
<6>device etba1-et16 left promiscuous mode
<6>device etba1-et22 left promiscuous mode
<6>device etba1-et10 left promiscuous mode
<6>device etba1-et11 left promiscuous mode
<6>device etba1-et12 left promiscuous mode
<6>device etba1-et13 left promiscuous mode
<6>device rtr2-et1 entered promiscuous mode
<6>device etba1-et2 entered promiscuous mode
<6>device etba1-et3 entered promiscuous mode
<6>device etba1-et1 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host1-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host2-e0 entered promiscuous mode
<1>BUG: Bad page map in process cc1plus  pte:ffff88000af0f748 pmd:0af0f067
<1>addr:00000000c2ce9000 vm_flags:00100073 anon_vma:ffff8800a88ec0c8 mapping:          (null) index:c2ce9
<4>Pid: 30109, comm: cc1plus Tainted: G    B       2.6.38-rc4-357643.2010AroraKernelBeta.fc14.x86_64 #1
<4>Call Trace:
<4> [<ffffffff810c92c0>] ? print_bad_pte+0x19e/0x1b7
<4> [<ffffffff810ca056>] ? vm_normal_page+0x4b/0x82
<4> [<ffffffff810cacca>] ? unmap_vmas+0x39f/0x75e
<4> [<ffffffff810d0239>] ? exit_mmap+0x9d/0x114
<4> [<ffffffff8103c4a6>] ? mmput+0x43/0xe6
<4> [<ffffffff810419e4>] ? exit_mm+0x134/0x141
<4> [<ffffffff813d0dbc>] ? _raw_spin_lock_irq+0x1a/0x1c
<4> [<ffffffff81041c1d>] ? do_exit+0x22c/0x7a6
<4> [<ffffffff8104240e>] ? do_group_exit+0x74/0x9c
<4> [<ffffffff81042448>] ? sys_exit_group+0x12/0x16
<4> [<ffffffff8102cd90>] ? sysenter_dispatch+0x7/0x2e
<1>BUG: Bad page map in process cc1plus  pte:ffff88000af0f748 pmd:0af0f067
<1>addr:00000000c2cea000 vm_flags:00100073 anon_vma:ffff8800a88ec0c8 mapping:          (null) index:c2cea
<4>Pid: 30109, comm: cc1plus Tainted: G    B       2.6.38-rc4-357643.2010AroraKernelBeta.fc14.x86_64 #1
<4>Call Trace:
<4> [<ffffffff810c92c0>] ? print_bad_pte+0x19e/0x1b7
<4> [<ffffffff810ca056>] ? vm_normal_page+0x4b/0x82
<4> [<ffffffff810cacca>] ? unmap_vmas+0x39f/0x75e
<4> [<ffffffff810d0239>] ? exit_mmap+0x9d/0x114
<4> [<ffffffff8103c4a6>] ? mmput+0x43/0xe6
<4> [<ffffffff810419e4>] ? exit_mm+0x134/0x141
<4> [<ffffffff813d0dbc>] ? _raw_spin_lock_irq+0x1a/0x1c
<4> [<ffffffff81041c1d>] ? do_exit+0x22c/0x7a6
<4> [<ffffffff8104240e>] ? do_group_exit+0x74/0x9c
<4> [<ffffffff81042448>] ? sys_exit_group+0x12/0x16
<4> [<ffffffff8102cd90>] ? sysenter_dispatch+0x7/0x2e
<6>device rtr2-et1 left promiscuous mode
<1>BUG: Bad page map in process [manager]  pte:ffff8801e50ef748 pmd:1e50ef067
<1>addr:00000000f50e9000 vm_flags:08000075 anon_vma:          (null) mapping:ffff8801ec94bd78 index:41
<1>vma->vm_ops->fault: filemap_fault+0x0/0x351
<1>vma->vm_file->f_op->mmap: ext4_file_mmap+0x0/0x4f
<4>Pid: 32145, comm: [manager] Tainted: G    B       2.6.38-rc4-357643.2010AroraKernelBeta.fc14.x86_64 #1
<4>Call Trace:
<4> [<ffffffff810c92c0>] ? print_bad_pte+0x19e/0x1b7
<4> [<ffffffff810ca056>] ? vm_normal_page+0x4b/0x82
<4> [<ffffffff810cacca>] ? unmap_vmas+0x39f/0x75e
<4> [<ffffffff810d0239>] ? exit_mmap+0x9d/0x114
<4> [<ffffffff8103c4a6>] ? mmput+0x43/0xe6
<4> [<ffffffff810419e4>] ? exit_mm+0x134/0x141
<4> [<ffffffff813d0dbc>] ? _raw_spin_lock_irq+0x1a/0x1c
<4> [<ffffffff81041c1d>] ? do_exit+0x22c/0x7a6
<4> [<ffffffff8104240e>] ? do_group_exit+0x74/0x9c
<4> [<ffffffff81042448>] ? sys_exit_group+0x12/0x16
<4> [<ffffffff8102cd90>] ? sysenter_dispatch+0x7/0x2e
<1>BUG: Bad page map in process [manager]  pte:ffff8801e50ef748 pmd:1e50ef067
<1>addr:00000000f50ea000 vm_flags:08000075 anon_vma:          (null) mapping:ffff8801ec94bd78 index:42
<1>vma->vm_ops->fault: filemap_fault+0x0/0x351
<1>vma->vm_file->f_op->mmap: ext4_file_mmap+0x0/0x4f
<4>Pid: 32145, comm: [manager] Tainted: G    B       2.6.38-rc4-357643.2010AroraKernelBeta.fc14.x86_64 #1
<4>Call Trace:
<4> [<ffffffff810c92c0>] ? print_bad_pte+0x19e/0x1b7
<4> [<ffffffff810ca056>] ? vm_normal_page+0x4b/0x82
<4> [<ffffffff810cacca>] ? unmap_vmas+0x39f/0x75e
<4> [<ffffffff810d0239>] ? exit_mmap+0x9d/0x114
<4> [<ffffffff8103c4a6>] ? mmput+0x43/0xe6
<4> [<ffffffff810419e4>] ? exit_mm+0x134/0x141
<4> [<ffffffff813d0dbc>] ? _raw_spin_lock_irq+0x1a/0x1c
<4> [<ffffffff81041c1d>] ? do_exit+0x22c/0x7a6
<4> [<ffffffff8104240e>] ? do_group_exit+0x74/0x9c
<4> [<ffffffff81042448>] ? sys_exit_group+0x12/0x16
<4> [<ffffffff8102cd90>] ? sysenter_dispatch+0x7/0x2e
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<4>httpd used greatest stack depth: 2624 bytes left
<6>device etba1-et1 left promiscuous mode
<6>device etba1-et2 left promiscuous mode
<6>device etba1-et3 left promiscuous mode
<6>device host1-e0 left promiscuous mode
<1>BUG: Bad page map in process [manager]  pte:ffff88000af0d748 pmd:0af0d067
<1>addr:00000000f04e9000 vm_flags:020000fb anon_vma:          (null) mapping:ffff8800218fe978 index:182
<1>vma->vm_ops->fault: 0x0
<1>vma->vm_file->f_op->mmap: sock_mmap+0x0/0x1a
<4>Pid: 32332, comm: [manager] Tainted: G    B       2.6.38-rc4-357643.2010AroraKernelBeta.fc14.x86_64 #1
<4>Call Trace:
<4> [<ffffffff810c92c0>] ? print_bad_pte+0x19e/0x1b7
<4> [<ffffffff810ca056>] ? vm_normal_page+0x4b/0x82
<4> [<ffffffff810cacca>] ? unmap_vmas+0x39f/0x75e
<4> [<ffffffff810d0239>] ? exit_mmap+0x9d/0x114
<4> [<ffffffff8103c4a6>] ? mmput+0x43/0xe6
<4> [<ffffffff810419e4>] ? exit_mm+0x134/0x141
<4> [<ffffffff813d0dbc>] ? _raw_spin_lock_irq+0x1a/0x1c
<4> [<ffffffff81041c1d>] ? do_exit+0x22c/0x7a6
<4> [<ffffffff8104240e>] ? do_group_exit+0x74/0x9c
<4> [<ffffffff81042448>] ? sys_exit_group+0x12/0x16
<4> [<ffffffff8102cd90>] ? sysenter_dispatch+0x7/0x2e
<1>BUG: Bad page map in process [manager]  pte:ffff88000af0d748 pmd:0af0d067
<1>addr:00000000f04ea000 vm_flags:020000fb anon_vma:          (null) mapping:ffff8800218fe978 index:183
<1>vma->vm_ops->fault: 0x0
<1>vma->vm_file->f_op->mmap: sock_mmap+0x0/0x1a
<4>Pid: 32332, comm: [manager] Tainted: G    B       2.6.38-rc4-357643.2010AroraKernelBeta.fc14.x86_64 #1
<4>Call Trace:
<4> [<ffffffff810c92c0>] ? print_bad_pte+0x19e/0x1b7
<4> [<ffffffff810ca056>] ? vm_normal_page+0x4b/0x82
<4> [<ffffffff810cacca>] ? unmap_vmas+0x39f/0x75e
<4> [<ffffffff810d0239>] ? exit_mmap+0x9d/0x114
<4> [<ffffffff8103c4a6>] ? mmput+0x43/0xe6
<4> [<ffffffff810419e4>] ? exit_mm+0x134/0x141
<4> [<ffffffff813d0dbc>] ? _raw_spin_lock_irq+0x1a/0x1c
<4> [<ffffffff81041c1d>] ? do_exit+0x22c/0x7a6
<4> [<ffffffff8104240e>] ? do_group_exit+0x74/0x9c
<4> [<ffffffff81042448>] ? sys_exit_group+0x12/0x16
<4> [<ffffffff8102cd90>] ? sysenter_dispatch+0x7/0x2e
<1>BUG: Bad page map in process [manager]  pte:ffff88000aea5748 pmd:0aea5067
<1>addr:00000000f42e9000 vm_flags:00100073 anon_vma:ffff8801a55ac578 mapping:          (null) index:f42e9
<4>Pid: 32332, comm: [manager] Tainted: G    B       2.6.38-rc4-357643.2010AroraKernelBeta.fc14.x86_64 #1
<4>Call Trace:
<4> [<ffffffff810c92c0>] ? print_bad_pte+0x19e/0x1b7
<4> [<ffffffff810ca056>] ? vm_normal_page+0x4b/0x82
<4> [<ffffffff810cacca>] ? unmap_vmas+0x39f/0x75e
<4> [<ffffffff810d0239>] ? exit_mmap+0x9d/0x114
<4> [<ffffffff8103c4a6>] ? mmput+0x43/0xe6
<4> [<ffffffff810419e4>] ? exit_mm+0x134/0x141
<4> [<ffffffff813d0dbc>] ? _raw_spin_lock_irq+0x1a/0x1c
<4> [<ffffffff81041c1d>] ? do_exit+0x22c/0x7a6
<4> [<ffffffff8104240e>] ? do_group_exit+0x74/0x9c
<4> [<ffffffff81042448>] ? sys_exit_group+0x12/0x16
<4> [<ffffffff8102cd90>] ? sysenter_dispatch+0x7/0x2e
<1>BUG: Bad page map in process [manager]  pte:ffff88000aea5748 pmd:0aea5067
<1>addr:00000000f42ea000 vm_flags:00100073 anon_vma:ffff8801a55ac578 mapping:          (null) index:f42ea
<4>Pid: 32332, comm: [manager] Tainted: G    B       2.6.38-rc4-357643.2010AroraKernelBeta.fc14.x86_64 #1
<4>Call Trace:
<4> [<ffffffff810c92c0>] ? print_bad_pte+0x19e/0x1b7
<4> [<ffffffff810ca056>] ? vm_normal_page+0x4b/0x82
<4> [<ffffffff810cacca>] ? unmap_vmas+0x39f/0x75e
<4> [<ffffffff810d0239>] ? exit_mmap+0x9d/0x114
<4> [<ffffffff8103c4a6>] ? mmput+0x43/0xe6
<4> [<ffffffff810419e4>] ? exit_mm+0x134/0x141
<4> [<ffffffff813d0dbc>] ? _raw_spin_lock_irq+0x1a/0x1c
<4> [<ffffffff81041c1d>] ? do_exit+0x22c/0x7a6
<4> [<ffffffff8104240e>] ? do_group_exit+0x74/0x9c
<4> [<ffffffff81042448>] ? sys_exit_group+0x12/0x16
<4> [<ffffffff8102cd90>] ? sysenter_dispatch+0x7/0x2e
<6>device host2-e0 left promiscuous mode
<1>BUG: Bad page map in process [manager]  pte:ffff8801178f5748 pmd:1178f5067
<1>addr:00000000eeae9000 vm_flags:020000fb anon_vma:          (null) mapping:ffff880286abe1f8 index:182
<1>vma->vm_ops->fault: 0x0
<1>vma->vm_file->f_op->mmap: sock_mmap+0x0/0x1a
<4>Pid: 32384, comm: [manager] Tainted: G    B       2.6.38-rc4-357643.2010AroraKernelBeta.fc14.x86_64 #1
<4>Call Trace:
<4> [<ffffffff810c92c0>] ? print_bad_pte+0x19e/0x1b7
<4> [<ffffffff810ca056>] ? vm_normal_page+0x4b/0x82
<4> [<ffffffff810cacca>] ? unmap_vmas+0x39f/0x75e
<4> [<ffffffff810d0239>] ? exit_mmap+0x9d/0x114
<4> [<ffffffff8103c4a6>] ? mmput+0x43/0xe6
<4> [<ffffffff810419e4>] ? exit_mm+0x134/0x141
<4> [<ffffffff813d0dbc>] ? _raw_spin_lock_irq+0x1a/0x1c
<4> [<ffffffff81041c1d>] ? do_exit+0x22c/0x7a6
<4> [<ffffffff8104240e>] ? do_group_exit+0x74/0x9c
<4> [<ffffffff81042448>] ? sys_exit_group+0x12/0x16
<4> [<ffffffff8102cd90>] ? sysenter_dispatch+0x7/0x2e
<1>BUG: Bad page map in process [manager]  pte:ffff8801178f5748 pmd:1178f5067
<1>addr:00000000eeaea000 vm_flags:020000fb anon_vma:          (null) mapping:ffff880286abe1f8 index:183
<1>vma->vm_ops->fault: 0x0
<1>vma->vm_file->f_op->mmap: sock_mmap+0x0/0x1a
<4>Pid: 32384, comm: [manager] Tainted: G    B       2.6.38-rc4-357643.2010AroraKernelBeta.fc14.x86_64 #1
<4>Call Trace:
<4> [<ffffffff810c92c0>] ? print_bad_pte+0x19e/0x1b7
<4> [<ffffffff810ca056>] ? vm_normal_page+0x4b/0x82
<4> [<ffffffff810cacca>] ? unmap_vmas+0x39f/0x75e
<4> [<ffffffff810d0239>] ? exit_mmap+0x9d/0x114
<4> [<ffffffff8103c4a6>] ? mmput+0x43/0xe6
<4> [<ffffffff810419e4>] ? exit_mm+0x134/0x141
<4> [<ffffffff813d0dbc>] ? _raw_spin_lock_irq+0x1a/0x1c
<4> [<ffffffff81041c1d>] ? do_exit+0x22c/0x7a6
<4> [<ffffffff8104240e>] ? do_group_exit+0x74/0x9c
<4> [<ffffffff81042448>] ? sys_exit_group+0x12/0x16
<4> [<ffffffff8102cd90>] ? sysenter_dispatch+0x7/0x2e
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<1>BUG: Bad page map in process [manager]  pte:ffff8801e07a9748 pmd:1e07a9067
<1>addr:00000000ef4e9000 vm_flags:020000fb anon_vma:          (null) mapping:ffff8800218fc8f8 index:1c2
<1>vma->vm_ops->fault: 0x0
<1>vma->vm_file->f_op->mmap: sock_mmap+0x0/0x1a
<4>Pid: 32447, comm: [manager] Tainted: G    B       2.6.38-rc4-357643.2010AroraKernelBeta.fc14.x86_64 #1
<4>Call Trace:
<4> [<ffffffff810c92c0>] ? print_bad_pte+0x19e/0x1b7
<4> [<ffffffff810ca056>] ? vm_normal_page+0x4b/0x82
<4> [<ffffffff810cacca>] ? unmap_vmas+0x39f/0x75e
<4> [<ffffffff810d0239>] ? exit_mmap+0x9d/0x114
<4> [<ffffffff8103c4a6>] ? mmput+0x43/0xe6
<4> [<ffffffff810419e4>] ? exit_mm+0x134/0x141
<4> [<ffffffff813d0dbc>] ? _raw_spin_lock_irq+0x1a/0x1c
<4> [<ffffffff81041c1d>] ? do_exit+0x22c/0x7a6
<4> [<ffffffff8104240e>] ? do_group_exit+0x74/0x9c
<4> [<ffffffff81042448>] ? sys_exit_group+0x12/0x16
<4> [<ffffffff8102cd90>] ? sysenter_dispatch+0x7/0x2e
<1>BUG: Bad page map in process [manager]  pte:ffff8801e07a9748 pmd:1e07a9067
<1>addr:00000000ef4ea000 vm_flags:020000fb anon_vma:          (null) mapping:ffff8800218fc8f8 index:1c3
<1>vma->vm_ops->fault: 0x0
<1>vma->vm_file->f_op->mmap: sock_mmap+0x0/0x1a
<4>Pid: 32447, comm: [manager] Tainted: G    B       2.6.38-rc4-357643.2010AroraKernelBeta.fc14.x86_64 #1
<4>Call Trace:
<4> [<ffffffff810c92c0>] ? print_bad_pte+0x19e/0x1b7
<4> [<ffffffff810ca056>] ? vm_normal_page+0x4b/0x82
<4> [<ffffffff810cacca>] ? unmap_vmas+0x39f/0x75e
<4> [<ffffffff810d0239>] ? exit_mmap+0x9d/0x114
<4> [<ffffffff8103c4a6>] ? mmput+0x43/0xe6
<4> [<ffffffff810419e4>] ? exit_mm+0x134/0x141
<4> [<ffffffff813d0dbc>] ? _raw_spin_lock_irq+0x1a/0x1c
<4> [<ffffffff81041c1d>] ? do_exit+0x22c/0x7a6
<4> [<ffffffff8104240e>] ? do_group_exit+0x74/0x9c
<4> [<ffffffff81042448>] ? sys_exit_group+0x12/0x16
<4> [<ffffffff8102cd90>] ? sysenter_dispatch+0x7/0x2e
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): e12: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): e12: link becomes ready
<6>ADDRCONF(NETDEV_UP): e23: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): e23: link becomes ready
<6>ADDRCONF(NETDEV_UP): e1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): e1: link becomes ready
<6>ADDRCONF(NETDEV_UP): e2: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): e2: link becomes ready
<6>ADDRCONF(NETDEV_UP): e3: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): e3: link becomes ready
<6>device rtr2-et1 entered promiscuous mode
<6>device rtr2-et2 entered promiscuous mode
<6>device rtr2-et1 entered promiscuous mode
<6>device rtr1-et8 entered promiscuous mode
<6>device rtr1-et9 entered promiscuous mode
<6>device rtr1-et2 entered promiscuous mode
<6>device rtr1-et3 entered promiscuous mode
<6>device rtr1-et1 entered promiscuous mode
<6>device rtr1-et6 entered promiscuous mode
<6>device rtr1-et7 entered promiscuous mode
<6>device rtr1-et4 entered promiscuous mode
<6>device rtr1-et5 entered promiscuous mode
<6>device rtr1-et21 entered promiscuous mode
<6>device rtr1-et26 entered promiscuous mode
<6>device rtr1-et15 entered promiscuous mode
<6>device rtr1-et23 entered promiscuous mode
<6>device rtr1-et27 entered promiscuous mode
<6>device rtr1-et17 entered promiscuous mode
<6>device rtr1-et25 entered promiscuous mode
<6>device rtr1-et24 entered promiscuous mode
<6>device rtr1-et28 entered promiscuous mode
<6>device rtr1-et18 entered promiscuous mode
<6>device rtr1-et19 entered promiscuous mode
<6>device rtr1-et14 entered promiscuous mode
<6>device rtr1-et20 entered promiscuous mode
<6>device rtr1-et16 entered promiscuous mode
<6>device rtr1-et22 entered promiscuous mode
<6>device rtr1-et10 entered promiscuous mode
<6>device rtr1-et11 entered promiscuous mode
<6>device rtr1-et12 entered promiscuous mode
<6>device rtr1-et13 entered promiscuous mode
<6>device rtr2-et8 entered promiscuous mode
<6>device rtr2-et9 entered promiscuous mode
<6>device rtr2-et2 entered promiscuous mode
<6>device rtr2-et3 entered promiscuous mode
<6>device rtr2-et1 entered promiscuous mode
<6>device rtr2-et6 entered promiscuous mode
<6>device rtr2-et7 entered promiscuous mode
<6>device rtr2-et4 entered promiscuous mode
<6>device rtr2-et5 entered promiscuous mode
<6>device rtr2-et21 entered promiscuous mode
<6>device rtr2-et26 entered promiscuous mode
<6>device rtr2-et15 entered promiscuous mode
<6>device rtr2-et23 entered promiscuous mode
<6>device rtr2-et27 entered promiscuous mode
<6>device rtr2-et17 entered promiscuous mode
<6>device rtr2-et25 entered promiscuous mode
<6>device rtr2-et24 entered promiscuous mode
<6>device rtr2-et28 entered promiscuous mode
<6>device rtr2-et18 entered promiscuous mode
<6>device rtr2-et19 entered promiscuous mode
<6>device rtr2-et14 entered promiscuous mode
<6>device rtr2-et20 entered promiscuous mode
<6>device rtr2-et16 entered promiscuous mode
<6>device rtr2-et22 entered promiscuous mode
<6>device rtr2-et10 entered promiscuous mode
<6>device rtr2-et11 entered promiscuous mode
<6>device rtr2-et12 entered promiscuous mode
<6>device rtr2-et13 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): e12: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): e12: link becomes ready
<6>ADDRCONF(NETDEV_UP): e23: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): e23: link becomes ready
<6>ADDRCONF(NETDEV_UP): e1: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): e1: link becomes ready
<6>ADDRCONF(NETDEV_UP): e2: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): e2: link becomes ready
<6>ADDRCONF(NETDEV_UP): e3: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): e3: link becomes ready
<6>device rtr3-et2 entered promiscuous mode
<6>device rtr3-et1 entered promiscuous mode
<6>device rtr3-et1 entered promiscuous mode
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268126 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268126 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268126 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268126 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268
<4>JBD: Spotted dirty metadata buffer (dev = sda3, blocknr = 0). There's a risk of filesystem corruption in case of system crash.
<4>126 free blocks as per group info. But got 128 blocks
<4>JBD: Spotted dirty metadata buffer (dev = sda3, blocknr = 0). There's a risk of filesystem corruption in case of system crash.
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<4>JBD: Spotted dirty metadata buffer (dev = sda3, blocknr = 0). There's a risk of filesystem corruption in case of system crash.
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host1-e0 entered promiscuous mode
<4>JBD: Spotted dirty metadata buffer (dev = sda3, blocknr = 0). There's a risk of filesystem corruption in case of system crash.
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host2-e0 entered promiscuous mode
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>device host3-e0 entered promiscuous mode
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268126 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268126 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268126 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268126 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268126 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268126 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268126 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268124 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268124 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268124 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268124 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268124 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268124 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268
<4>JBD: Spotted dirty metadata buffer (dev = sda3, blocknr = 0). There's a risk of filesystem corruption in case of system crash.
<4>JBD: Spotted dirty metadata buffer (dev = sda3, blocknr = 0). There's a risk of filesystem corruption in case of system crash.
<4>124 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268122 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268122 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268122 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268122 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268122 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268120 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268118 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268116 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268116 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268114 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268114 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268114 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268114 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268114 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268112 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268112 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268112 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268110 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268110 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268110 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268110 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268110 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268110 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268110 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268110 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268110 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268110 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268110 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268110 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268110 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268110 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268110 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268110 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268108 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268108 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268108 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268108 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268
<4>JBD: Spotted dirty metadata buffer (dev = sda3, blocknr = 0). There's a risk of filesystem corruption in case of system crash.
<4>JBD: Spotted dirty metadata buffer (dev = sda3, blocknr = 0). There's a risk of filesystem corruption in case of system crash.
<4>108 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268108 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268108 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268108 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268108 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268108 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268108 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268108 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268108 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268108 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268108 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268108 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268108 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268108 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268106 free blocks as per group info. But got 128 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126842 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126842 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126842 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126862 free blocks as per group info. But got 84 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126862 free blocks as per group info. But got 84 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126850 free blocks as per group info. But got 72 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126850 free blocks as per group info. But got 72 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126850 free blocks as per group info. But got 72 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126850 free blocks as per group info. But got 72 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126850 free blocks as per group info. But got 72 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126842 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126842 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126842 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126842 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126834 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126834 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126834 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126834 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126834 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126834 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126834 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126834 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126834 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126834 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126834 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126834 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126834 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126834 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126834 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126834 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126834 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126834 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126834 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126834 free blocks as per group info. But got 64 blocks
<4>JBD: Spotted dirty metadata buffer (dev = sda3, blocknr = 0). There's a risk of filesystem corruption in case of system crash.
<4>JBD: Spotted dirty metadata buffer (dev = sda3, blocknr = 0). There's a risk of filesystem corruption in case of system crash.
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126834 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126834 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126834 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126834 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126834 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126834 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126834 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126834 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126834 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126834 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126832 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126832 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126832 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126832 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126832 free blocks as per group info. But got 64 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 126815 free blocks as per group info. But got 47 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682 free blocks as per group info. But got 4 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682 free blocks as per group info. But got 36 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682046 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682046 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682046 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682046 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682046 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682046 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682046 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682046 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682046 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682046 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682046 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682046 free blocks as per group info. But got 2048 blocks
<4>JBD: Spotted dirty metadata buffer (dev = sda3, blocknr = 0). There's a risk of filesystem corruption in case of system crash.
<4>JBD: Spotted dirty metadata buffer (dev = sda3, blocknr = 0). There's a risk of filesystem corruption in case of system crash.
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682046 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682046 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682044 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682038 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682038 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682038 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682034 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682034 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682034 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682032 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682032 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682032 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682032 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682032 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682032 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682032 free blocks as per group info. But got 2048 blocks
<4>JBD: Spotted dirty metadata buffer (dev = sda3, blocknr = 0). There's a risk of filesystem corruption in case of system crash.
<4>JBD: Spotted dirty metadata buffer (dev = sda3, blocknr = 0). There's a risk of filesystem corruption in case of system crash.
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682032 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682032 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682032 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682032 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682032 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682032 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682032 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682032 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682032 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682032 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682032 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682032 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682026 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682026 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682026 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682026 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682030 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682030 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682030 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682030 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682030 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682030 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682030 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682030 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682028 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682028 free blocks as per group info. But got 2048 blocks
<4>JBD: Spotted dirty metadata buffer (dev = sda3, blocknr = 0). There's a risk of filesystem corruption in case of system crash.
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682026 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682026 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682026 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268
<4>JBD: Spotted dirty metadata buffer (dev = sda3, blocknr = 0). There's a risk of filesystem corruption in case of system crash.
<4>2026 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682026 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682026 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682026 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682026 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682026 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682026 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682026 free blocks as per group info. But got 2048 blocks
<4>JBD: Spotted dirty metadata buffer (dev = sda3, blocknr = 0). There's a risk of filesystem corruption in case of system crash.
<1>BUG: Bad page map in process [manager]  pte:ffff8800aeb67748 pmd:aeb67067
<1>addr:000000000bae9000 vm_flags:00100073 anon_vma:ffff880037bca140 mapping:          (null) index:bae9
<4>Pid: 6421, comm: [manager] Tainted: G    B       2.6.38-rc4-357643.2010AroraKernelBeta.fc14.x86_64 #1
<4>Call Trace:
<4> [<ffffffff810c92c0>] ? print_bad_pte+0x19e/0x1b7
<4> [<ffffffff810ca056>] ? vm_normal_page+0x4b/0x82
<4> [<ffffffff810cacca>] ? unmap_vmas+0x39f/0x75e
<4> [<ffffffff810d0239>] ? exit_mmap+0x9d/0x114
<4> [<ffffffff8103c4a6>] ? mmput+0x43/0xe6
<4> [<ffffffff810419e4>] ? exit_mm+0x134/0x141
<4> [<ffffffff813d0dbc>] ? _raw_spin_lock_irq+0x1a/0x1c
<4> [<ffffffff81041c1d>] ? do_exit+0x22c/0x7a6
<4> [<ffffffff810f0769>] ? vfs_write+0xcb/0xfa
<4> [<ffffffff8104240e>] ? do_group_exit+0x74/0x9c
<4> [<ffffffff81042448>] ? sys_exit_group+0x12/0x16
<4> [<ffffffff8102cd90>] ? sysenter_dispatch+0x7/0x2e
<1>BUG: Bad page map in process [manager]  pte:ffff8800aeb67748 pmd:aeb67067
<1>addr:000000000baea000 vm_flags:00100073 anon_vma:ffff880037bca140 mapping:          (null) index:baea
<4>Pid: 6421, comm: [manager] Tainted: G    B       2.6.38-rc4-357643.2010AroraKernelBeta.fc14.x86_64 #1
<4>Call Trace:
<4> [<ffffffff810c92c0>] ? print_bad_pte+0x19e/0x1b7
<4> [<ffffffff810ca056>] ? vm_normal_page+0x4b/0x82
<4> [<ffffffff810cacca>] ? unmap_vmas+0x39f/0x75e
<4> [<ffffffff810d0239>] ? exit_mmap+0x9d/0x114
<4> [<ffffffff8103c4a6>] ? mmput+0x43/0xe6
<4> [<ffffffff810419e4>] ? exit_mm+0x134/0x141
<4> [<ffffffff813d0dbc>] ? _raw_spin_lock_irq+0x1a/0x1c
<4> [<ffffffff81041c1d>] ? do_exit+0x22c/0x7a6
<4> [<ffffffff810f0769>] ? vfs_write+0xcb/0xfa
<4> [<ffffffff8104240e>] ? do_group_exit+0x74/0x9c
<4> [<ffffffff81042448>] ? sys_exit_group+0x12/0x16
<4> [<ffffffff8102cd90>] ? sysenter_dispatch+0x7/0x2e
<6>device rtr2-et1 left promiscuous mode
<1>BUG: Bad page map in process ribd  pte:ffff88001dae1748 pmd:1dae1067
<1>addr:00000000082e9000 vm_flags:08001875 anon_vma:          (null) mapping:ffff880002d96078 index:2a1
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682026 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682026 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682026 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682026 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682014 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682014 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682014 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682014 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682010 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682010 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682010 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682010 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682010 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682010 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682010 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682006 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682006 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682006 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682006 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682006 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682006 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682006 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 12682006 free blocks as per group info. But got 2048 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268974 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268974 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268974 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268974 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268974 free blocks as per group info. But got 1024 blocks
<4>JBD: Spotted dirty metadata buffer (dev = sda3, blocknr = 0). There's a risk of filesystem corruption in case of system crash.
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268974 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268974 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268974 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268974 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268974 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268974 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268974 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268974 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268974 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268974 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268974 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268974 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268974 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268974 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268974 free blocks as per group info. But got 1024 blocks
<4>JBD: Spotted dirty metadata buffer (dev = sda3, blocknr = 0). There's a risk of filesystem corruption in case of system crash.
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268972 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268972 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268972 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268972 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268972 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268972 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268972 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268972 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268970 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268970 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268964 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268964 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268964 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268964 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268964 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268964 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268964 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268964 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268964 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268964 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268964 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268964 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268962 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268962 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268962 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268962 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268962 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268962 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268962 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268962 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268962 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268962 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268962 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268962 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268962 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268962 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268962 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268962 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268962 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268962 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268962 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268962 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268962 free blocks as per group info. But got 1024 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268460 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268460 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268460 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268460 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268460 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268460 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268460 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268460 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268460 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268460 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268460 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268456 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268456 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268460 free blocks as per group info. But got 512 blocks
<4>Clocksource tsc unstable (delta = -8589933024 ns)
<1>vma->vm_ops->fault: filemap_fault+0x0/0x351
<1>vma->vm_file->f_op->mmap: ext4_file_mmap+0x0/0x4f
<4>Pid: 12104, comm: ribd Tainted: G    B       2.6.38-rc4-357643.2010AroraKernelBeta.fc14.x86_64 #1
<4>Call Trace:
<4> [<ffffffff810c92c0>] ? print_bad_pte+0x19e/0x1b7
<4> [<ffffffff810ca056>] ? vm_normal_page+0x4b/0x82
<4> [<ffffffff810cacca>] ? unmap_vmas+0x39f/0x75e
<4> [<ffffffff810d0239>] ? exit_mmap+0x9d/0x114
<4> [<ffffffff8103c4a6>] ? mmput+0x43/0xe6
<4> [<ffffffff810419e4>] ? exit_mm+0x134/0x141
<4> [<ffffffff813d0dbc>] ? _raw_spin_lock_irq+0x1a/0x1c
<4> [<ffffffff81041c1d>] ? do_exit+0x22c/0x7a6
<4> [<ffffffff810fe77b>] ? pollwake+0x0/0x4f
<4> [<ffffffff8104cd46>] ? recalc_sigpending_tsk+0x35/0x3c
<4> [<ffffffff8104240e>] ? do_group_exit+0x74/0x9c
<4> [<ffffffff8104e891>] ? get_signal_to_deliver+0x337/0x35d
<4> [<ffffffff81001e95>] ? do_signal+0x6d/0x65e
<4> [<ffffffff810088fe>] ? read_tsc+0x9/0x19
<4> [<ffffffff8105f9f5>] ? timekeeping_get_ns+0x16/0x38
<4> [<ffffffff8105fdc8>] ? ktime_get_ts+0x80/0x89
<4> [<ffffffff8112635d>] ? poll_select_copy_remaining+0xc5/0xe9
<4> [<ffffffff810024c1>] ? do_notify_resume+0x27/0x69
<4> [<ffffffff81002c60>] ? int_signal+0x12/0x17
<1>BUG: Bad page map in process ribd  pte:ffff88001dae1748 pmd:1dae1067
<1>addr:00000000082ea000 vm_flags:08001875 anon_vma:          (null) mapping:ffff880002d96078 index:2a2
<1>vma->vm_ops->fault: filemap_fault+0x0/0x351
<1>vma->vm_file->f_op->mmap: ext4_file_mmap+0x0/0x4f
<4>Pid: 12104, comm: ribd Tainted: G    B       2.6.38-rc4-357643.2010AroraKernelBeta.fc14.x86_64 #1
<4>Call Trace:
<4> [<ffffffff810c92c0>] ? print_bad_pte+0x19e/0x1b7
<4> [<ffffffff810ca056>] ? vm_normal_page+0x4b/0x82
<4> [<ffffffff810cacca>] ? unmap_vmas+0x39f/0x75e
<4> [<ffffffff810d0239>] ? exit_mmap+0x9d/0x114
<4> [<ffffffff8103c4a6>] ? mmput+0x43/0xe6
<4> [<ffffffff810419e4>] ? exit_mm+0x134/0x141
<4> [<ffffffff813d0dbc>] ? _raw_spin_lock_irq+0x1a/0x1c
<4> [<ffffffff81041c1d>] ? do_exit+0x22c/0x7a6
<4> [<ffffffff810fe77b>] ? pollwake+0x0/0x4f
<4> [<ffffffff8104cd46>] ? recalc_sigpending_tsk+0x35/0x3c
<4> [<ffffffff8104240e>] ? do_group_exit+0x74/0x9c
<4> [<ffffffff8104e891>] ? get_signal_to_deliver+0x337/0x35d
<4> [<ffffffff81001e95>] ? do_signal+0x6d/0x65e
<4> [<ffffffff810088fe>] ? read_tsc+0x9/0x19
<4> [<ffffffff8105f9f5>] ? timekeeping_get_ns+0x16/0x38
<4> [<ffffffff8105fdc8>] ? ktime_get_ts+0x80/0x89
<4> [<ffffffff8112635d>] ? poll_select_copy_remaining+0xc5/0xe9
<4> [<ffffffff810024c1>] ? do_notify_resume+0x27/0x69
<4> [<ffffffff81002c60>] ? int_signal+0x12/0x17
<6>Switching to clocksource hpet
<6>device rtr3-et1 left promiscuous mode
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268476 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268476 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268476 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268476 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268476 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268476 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268472 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268472 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268472 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268472 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268472 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268472 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268472 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268470 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268470 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268468 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268468 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268468 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268466 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268466 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268466 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268466 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268460 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268460 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268448 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268448 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268448 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268448 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268448 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268442 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268432 free blocks as per group info. But got 512 blocks
<2>EXT4-fs error (device sda3): ext4_mb_complex_scan_group:1897: group 1268432 free blocks as per group info. But got 512 blocks
<6>device rtr1-et8 left promiscuous mode
<6>device rtr1-et9 left promiscuous mode
<6>device rtr1-et2 left promiscuous mode
<6>device rtr1-et3 left promiscuous mode
<6>device rtr1-et1 left promiscuous mode
<6>device rtr1-et6 left promiscuous mode
<6>device rtr1-et7 left promiscuous mode
<6>device rtr1-et4 left promiscuous mode
<6>device rtr1-et5 left promiscuous mode
<6>device rtr1-et14 left promiscuous mode
<6>device rtr1-et15 left promiscuous mode
<6>device rtr1-et23 left promiscuous mode
<6>device rtr1-et17 left promiscuous mode
<6>device rtr1-et24 left promiscuous mode
<6>device rtr1-et18 left promiscuous mode
<6>device rtr1-et19 left promiscuous mode
<6>device rtr1-et21 left promiscuous mode
<6>device rtr1-et20 left promiscuous mode
<6>device rtr1-et16 left promiscuous mode
<6>device rtr1-et22 left promiscuous mode
<6>device rtr1-et10 left promiscuous mode
<6>device rtr1-et11 left promiscuous mode
<6>device rtr1-et12 left promiscuous mode
<6>device rtr1-et13 left promiscuous mode
<1>BUG: Bad page map in process Ira  pte:ffff88004b41f748 pmd:4b41f067
<1>addr:00000000f3ce9000 vm_flags:00100073 anon_vma:ffff880093281848 mapping:          (null) index:f3ce9
<4>Pid: 5428, comm: Ira Tainted: G    B       2.6.38-rc4-357643.2010AroraKernelBeta.fc14.x86_64 #1
<4>Call Trace:
<4> [<ffffffff810c92c0>] ? print_bad_pte+0x19e/0x1b7
<4> [<ffffffff810ca056>] ? vm_normal_page+0x4b/0x82
<4> [<ffffffff810cacca>] ? unmap_vmas+0x39f/0x75e
<4> [<ffffffff810d0239>] ? exit_mmap+0x9d/0x114
<4> [<ffffffff8103c4a6>] ? mmput+0x43/0xe6
<4> [<ffffffff810419e4>] ? exit_mm+0x134/0x141
<4> [<ffffffff813d0dbc>] ? _raw_spin_lock_irq+0x1a/0x1c
<4> [<ffffffff81041c1d>] ? do_exit+0x22c/0x7a6
<4> [<ffffffff8104cd46>] ? recalc_sigpending_tsk+0x35/0x3c
<4> [<ffffffff8104240e>] ? do_group_exit+0x74/0x9c
<4> [<ffffffff8104e891>] ? get_signal_to_deliver+0x337/0x35d
<4> [<ffffffff81001e95>] ? do_signal+0x6d/0x65e
<4> [<ffffffff8105f9f5>] ? timekeeping_get_ns+0x16/0x38
<4> [<ffffffff8105fdc8>] ? ktime_get_ts+0x80/0x89
<4> [<ffffffff8112635d>] ? poll_select_copy_remaining+0xc5/0xe9
<4> [<ffffffff810024c1>] ? do_notify_resume+0x27/0x69
<4> [<ffffffff81002c60>] ? int_signal+0x12/0x17
<1>BUG: Bad page map in process Ira  pte:ffff88004b41f748 pmd:4b41f067
<1>addr:00000000f3cea000 vm_flags:00100073 anon_vma:ffff880093281848 mapping:          (null) index:f3cea
<1>BUG: unable to handle kernel paging request at 0000000008000085
<1>IP: [<ffffffff8107401b>] acct_collect+0x54/0x181
<4>PGD 4acff067 PUD a8948067 PMD 941ef067 PTE 0
<0>Oops: 0000 [#1] SMP 
<0>last sysfs file: /sys/devices/virtual/net/bond0/bonding/slaves
<4>CPU 2 
<4>Modules linked in: macvtap ipt_LOG xt_limit ipt_REJECT xt_hl xt_state dummy tulip xt_tcpudp iptable_filter inet_diag veth macvlan nfsd lockd nfs_acl auth_rpcgss exportfs sunrpc dm_mirror dm_region_hash dm_log uinput bonding ipv6 kvm_intel kvm fuse xt_multiport iptable_nat ip_tables nf_nat x_tables nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 tun 8021q i5k_amb i5400_edac iTCO_wdt iTCO_vendor_support i2c_i801 edac_core ioatdma dca shpchp serio_raw pcspkr microcode ghes hed sg radeon ttm drm_kms_helper drm hwmon i2c_algo_bit i2c_core sr_mod cdrom igb netxen_nic ehci_hcd uhci_hcd dm_mod [last unloaded: mperf]
<4>
<4>Pid: 6460, comm: [manager] Tainted: G    B       2.6.38-rc4-357643.2010AroraKernelBeta.fc14.x86_64 #1 X7DWU/X7DWU
<4>RIP: 0010:[<ffffffff8107401b>]  [<ffffffff8107401b>] acct_collect+0x54/0x181
<4>RSP: 0018:ffff8800174bfc98  EFLAGS: 00210202
<4>RAX: 0000000008000075 RBX: 0000000000000009 RCX: ffff88001750cc70
<4>RDX: 0000000000002577 RSI: 0000000000000001 RDI: ffff88007d1ce960
<4>RBP: ffff8800174bfcc8 R08: 0000000000000000 R09: ffff88001750cc00
<4>R10: 00007ffffffff000 R11: ffff88028ed62000 R12: ffff88001750cc00
<4>R13: 000077ff8e6d58dd R14: ffff8801e51d14a0 R15: 0000000000000001
<4>FS:  0000000000000000(0000) GS:ffff8800cfc80000(0063) knlGS:00000000f73f1940
<4>CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
<4>CR2: 0000000008000085 CR3: 00000000108a6000 CR4: 00000000000006e0
<4>DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
<4>DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
<4>Process [manager] (pid: 6460, threadinfo ffff8800174be000, task ffff8801e51d14a0)
<0>Stack:
<4> ffff8800174bfcc8 ffff8801e51d14a0 0000000000000009 ffff88007d1ce900
<4> ffff88001750cc00 0000000000000001 ffff8800174bfd48 ffffffff81041be7
<4> 0000000000000088 0000000000002573 ffff8800174bfcf8 00000000000001e5
<0>Call Trace:
<4> [<ffffffff81041be7>] do_exit+0x1f6/0x7a6
<4> [<ffffffff8104128e>] ? wait_consider_task+0x904/0x911
<4> [<ffffffff8104cd46>] ? recalc_sigpending_tsk+0x35/0x3c
<4> [<ffffffff8104240e>] do_group_exit+0x74/0x9c
<4> [<ffffffff8104e891>] get_signal_to_deliver+0x337/0x35d
<4> [<ffffffff81001e95>] do_signal+0x6d/0x65e
<4> [<ffffffff8104037b>] ? child_wait_callback+0x0/0x53
<4> [<ffffffff8105f9f5>] ? timekeeping_get_ns+0x16/0x38
<4> [<ffffffff8105fdc8>] ? ktime_get_ts+0x80/0x89
<4> [<ffffffff8112635d>] ? poll_select_copy_remaining+0xc5/0xe9
<4> [<ffffffff810024c1>] do_notify_resume+0x27/0x69
<4> [<ffffffff81002c60>] int_signal+0x12/0x17
<0>Code: 04 00 00 74 50 49 83 be 58 01 00 00 00 74 46 49 8b be 58 01 00 00 48 83 c7 60 e8 75 c6 35 00 49 8b 86 58 01 00 00 48 8b 00 eb 0c <4c> 03 68 10 4c 2b 68 08 48 8b 40 18 48 85 c0 75 ef 65 48 8b 04 
<1>RIP  [<ffffffff8107401b>] acct_collect+0x54/0x181
<4> RSP <ffff8800174bfc98>
<0>CR2: 0000000008000085

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Heads up Linux 2.6.38-rc4 compile problems.
  2011-02-14 15:37                     ` Eric W. Biederman
@ 2011-02-14 16:37                       ` Linus Torvalds
  2011-02-14 17:39                         ` Eric W. Biederman
                                           ` (2 more replies)
  0 siblings, 3 replies; 62+ messages in thread
From: Linus Torvalds @ 2011-02-14 16:37 UTC (permalink / raw)
  To: Eric W. Biederman
  Cc: Alex Riesen, David Miller, Linux Kernel Mailing List, Andrew Morton

On Mon, Feb 14, 2011 at 7:37 AM, Eric W. Biederman
<ebiederm@xmission.com> wrote:
>
> 795abaf1e4e188c4171e3cd3dbb11a9fcacaf505  is not fairing too well.
>
> The Bad PMDs may be happening more frequently but the oops that killed
> me was a NULL pointer dereference in acct_collect this time.  Ugh.

So you also have a fair amount of those user-level SIGSEGV reports.
Which is consistent with memory corruption - most of the time the
corruption is not something that gets caught as a kernel data
structure corruption, but some random other data.

The PTE corruption does show a interesting patterns, though:

 - it's always two consecutive page table entries (that have the same
value, and it looks like a kernel pointer)

   This implies to me that it's a list operation. Please enable
CONFIG_DEBUG_LIST.

   The fact that the words are the same also tends to imply that it's
likely a bogus "list_init()" on free'd (or re-used) memory.

 - The values have a pattern, they look like this:

   ffff88000aea5748
   ffff88000af0d748
   ffff88000af0f748
   ffff88001dae1748
   ffff88004b41f748
   ffff8800aeb67748
   ffff8801178f5748
   ffff880192d85748
   ffff8801e07a9748
   ffff8801e50ef748
   ffff880282177748

   which means that they are always at the same offset (0x1748) of a
8kB allocation

 - The page table addresses have a pattern too (the count there is the
uniq count - there's one pair of addresses that shows up twice):

      1 00000000082e9000
      1 00000000082ea000
      1 000000000bae9000
      1 000000000baea000
      1 00000000c2ce9000
      1 00000000c2cea000
      1 00000000eeae9000
      1 00000000eeaea000
      1 00000000ef4e9000
      1 00000000ef4ea000
      1 00000000f04e9000
      1 00000000f04ea000
      1 00000000f3ce9000
      1 00000000f3cea000
      1 00000000f42e9000
      1 00000000f42ea000
      2 00000000f50e9000
      2 00000000f50ea000
      1 00000000f66e9000
      1 00000000f66ea000

   and turning "virtual address" into "page table address" (shift down
by page size, shift up by page table entry size), you get

      00041748
      00041750
      0005d748
      0005d750
      00616748
      00616750
      00775748
      00775750
      0077a748
      0077a750
      00782748
      00782750
      0079e748
      0079e750
      007a1748
      007a1750
      007a8748
      007a8750
      007b3748
      007b3750

  which shows the same 0x748 pattern (the "1750" pattern is just the
next word address). Which is *exactly* what you'd expect from an empty
list (list pointer pointing to itself, and the low 12 bits are
identical in virtual address - the high bits will obviously differ,
since they are all about the allocation of the page tables
themselves).

In other words: I can pretty much guarantee that this is a "struct
list" that is in a 8kB allocation at offset 0x1748. And that gets
re-initialized after it got freed.

Now, I don't know what the actual 8kB allocation is. And most
structures end up having very different offsets based on various
config options, so I can't even guess. And it is possible that there
is some other reason for the 8kB thing (for example, you clearly are
doing things with networking and promiscuous mode, and maybe the
particular skb allocation pattern or something ends up using a SLUB
entry that is always two pages etc.

Can anybody see any other patterns?

                                              Linus

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Heads up Linux 2.6.38-rc4 compile problems.
  2011-02-14  5:34                   ` Eric W. Biederman
  2011-02-14 15:26                     ` Linus Torvalds
  2011-02-14 15:37                     ` Eric W. Biederman
@ 2011-02-14 16:58                     ` Mike Snitzer
  2011-02-15 14:07                       ` [Crash-utility] " Dave Anderson
  2 siblings, 1 reply; 62+ messages in thread
From: Mike Snitzer @ 2011-02-14 16:58 UTC (permalink / raw)
  To: Eric W. Biederman
  Cc: Linus Torvalds, Alex Riesen, David Miller,
	Linux Kernel Mailing List, Andrew Morton, crash-utility

Hey Eric,

On Mon, Feb 14, 2011 at 12:34 AM, Eric W. Biederman
<ebiederm@xmission.com> wrote:
>
> And for completeness.  When I was rebooting v2.6.38-rc4 to start running
> 795abaf1e4e188c4171e3cd3dbb11a9fcacaf505  I hit this.
>
> Sigh.  I wish crash worked on something besides redhats enterprise
> kernels.  Then I could use the system core file I have to do more than
> extract the dmesg.

Then you should cc crash-utility@redhat.com (now cc'd) and work with
Dave Anderson (e.g. get him your vmlinux and core files, which version
of crash you're using and how it fails).  Dave does an amazing job of
working through crash issues which are reported against upstream
kernels -- the key first step is the report.

Mike

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Heads up Linux 2.6.38-rc4 compile problems.
  2011-02-14 16:37                       ` Linus Torvalds
@ 2011-02-14 17:39                         ` Eric W. Biederman
  2011-02-14 17:49                         ` Linus Torvalds
  2011-02-14 18:25                         ` Andi Kleen
  2 siblings, 0 replies; 62+ messages in thread
From: Eric W. Biederman @ 2011-02-14 17:39 UTC (permalink / raw)
  To: Linus Torvalds
  Cc: Alex Riesen, David Miller, Linux Kernel Mailing List, Andrew Morton

Linus Torvalds <torvalds@linux-foundation.org> writes:

> On Mon, Feb 14, 2011 at 7:37 AM, Eric W. Biederman
> <ebiederm@xmission.com> wrote:
>>
>> 795abaf1e4e188c4171e3cd3dbb11a9fcacaf505  is not fairing too well.
>>
>> The Bad PMDs may be happening more frequently but the oops that killed
>> me was a NULL pointer dereference in acct_collect this time.  Ugh.
>
> So you also have a fair amount of those user-level SIGSEGV reports.
> Which is consistent with memory corruption - most of the time the
> corruption is not something that gets caught as a kernel data
> structure corruption, but some random other data.
>
> The PTE corruption does show a interesting patterns, though:
>
>  - it's always two consecutive page table entries (that have the same
> value, and it looks like a kernel pointer)
>
>    This implies to me that it's a list operation. Please enable
> CONFIG_DEBUG_LIST.
>
>    The fact that the words are the same also tends to imply that it's
> likely a bogus "list_init()" on free'd (or re-used) memory.
>
>  - The values have a pattern, they look like this:
>
>    ffff88000aea5748
>    ffff88000af0d748
>    ffff88000af0f748
>    ffff88001dae1748
>    ffff88004b41f748
>    ffff8800aeb67748
>    ffff8801178f5748
>    ffff880192d85748
>    ffff8801e07a9748
>    ffff8801e50ef748
>    ffff880282177748
>
>    which means that they are always at the same offset (0x1748) of a
> 8kB allocation
>
>  - The page table addresses have a pattern too (the count there is the
> uniq count - there's one pair of addresses that shows up twice):
>
>       1 00000000082e9000
>       1 00000000082ea000
>       1 000000000bae9000
>       1 000000000baea000
>       1 00000000c2ce9000
>       1 00000000c2cea000
>       1 00000000eeae9000
>       1 00000000eeaea000
>       1 00000000ef4e9000
>       1 00000000ef4ea000
>       1 00000000f04e9000
>       1 00000000f04ea000
>       1 00000000f3ce9000
>       1 00000000f3cea000
>       1 00000000f42e9000
>       1 00000000f42ea000
>       2 00000000f50e9000
>       2 00000000f50ea000
>       1 00000000f66e9000
>       1 00000000f66ea000
>
>    and turning "virtual address" into "page table address" (shift down
> by page size, shift up by page table entry size), you get
>
>       00041748
>       00041750
>       0005d748
>       0005d750
>       00616748
>       00616750
>       00775748
>       00775750
>       0077a748
>       0077a750
>       00782748
>       00782750
>       0079e748
>       0079e750
>       007a1748
>       007a1750
>       007a8748
>       007a8750
>       007b3748
>       007b3750
>
>   which shows the same 0x748 pattern (the "1750" pattern is just the
> next word address). Which is *exactly* what you'd expect from an empty
> list (list pointer pointing to itself, and the low 12 bits are
> identical in virtual address - the high bits will obviously differ,
> since they are all about the allocation of the page tables
> themselves).
>
> In other words: I can pretty much guarantee that this is a "struct
> list" that is in a 8kB allocation at offset 0x1748. And that gets
> re-initialized after it got freed.

Interesting.

> Now, I don't know what the actual 8kB allocation is. And most
> structures end up having very different offsets based on various
> config options, so I can't even guess. And it is possible that there
> is some other reason for the 8kB thing (for example, you clearly are
> doing things with networking and promiscuous mode, and maybe the
> particular skb allocation pattern or something ends up using a SLUB
> entry that is always two pages etc.

It could be.  I also use a lot of transient network namespaces, so
potentially it could be just about anything in the networking stack.
They make testing all kinds networking behavior easy, especially when
all you have is a single machine.  Since we sniff the traffic to make
certain the right traffic is in transit we also get a lot of network
interfaces in promiscuous mode.

Eric

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Heads up Linux 2.6.38-rc4 compile problems.
  2011-02-14 16:37                       ` Linus Torvalds
  2011-02-14 17:39                         ` Eric W. Biederman
@ 2011-02-14 17:49                         ` Linus Torvalds
  2011-02-14 18:08                           ` Linus Torvalds
  2011-02-14 18:25                         ` Andi Kleen
  2 siblings, 1 reply; 62+ messages in thread
From: Linus Torvalds @ 2011-02-14 17:49 UTC (permalink / raw)
  To: Eric W. Biederman
  Cc: Alex Riesen, David Miller, Linux Kernel Mailing List, Andrew Morton

On Mon, Feb 14, 2011 at 8:37 AM, Linus Torvalds
<torvalds@linux-foundation.org> wrote:
>
> In other words: I can pretty much guarantee that this is a "struct
> list" that is in a 8kB allocation at offset 0x1748. And that gets
> re-initialized after it got freed.

Btw, can you just make that 'vmlinux' image (not the compressed one,
the actual final object file that I could do "objdump" on) available
somewhere, or just send me the .config file to try to reproduce it
closely enough to see what the 0x1748 offset might be.

As mentioned, those offsets change (often wildly) depending on config
options, and I don't think I've seen the .config file you have (or if
I've seen it, I've misplaced it).

                             Linus

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Heads up Linux 2.6.38-rc4 compile problems.
  2011-02-14 17:49                         ` Linus Torvalds
@ 2011-02-14 18:08                           ` Linus Torvalds
  2011-02-14 19:44                             ` Eric W. Biederman
  0 siblings, 1 reply; 62+ messages in thread
From: Linus Torvalds @ 2011-02-14 18:08 UTC (permalink / raw)
  To: Eric W. Biederman
  Cc: Alex Riesen, David Miller, Linux Kernel Mailing List, Andrew Morton

On Mon, Feb 14, 2011 at 9:49 AM, Linus Torvalds
<torvalds@linux-foundation.org> wrote:
>
> Btw, can you just make that 'vmlinux' image [..]

.. actually, since you have lots of modules, the .config file is a
much better option. If it's in some module, the vmlinux file won't
contain it.

(Although best guess would be for it to be some core data structure,
so who knows?)

                                 Linus

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Heads up Linux 2.6.38-rc4 compile problems.
  2011-02-14 16:37                       ` Linus Torvalds
  2011-02-14 17:39                         ` Eric W. Biederman
  2011-02-14 17:49                         ` Linus Torvalds
@ 2011-02-14 18:25                         ` Andi Kleen
  2 siblings, 0 replies; 62+ messages in thread
From: Andi Kleen @ 2011-02-14 18:25 UTC (permalink / raw)
  To: Linus Torvalds
  Cc: Eric W. Biederman, Alex Riesen, David Miller,
	Linux Kernel Mailing List, Andrew Morton

Linus Torvalds <torvalds@linux-foundation.org> writes:

>
> In other words: I can pretty much guarantee that this is a "struct
> list" that is in a 8kB allocation at offset 0x1748. And that gets
> re-initialized after it got freed.

If it's that the DEBUG_PAGEALLOC should have a good chance of catching
it.

-Andi

-- 
ak@linux.intel.com -- Speaking for myself only

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: lockdep: possible reason: unannotated irqs-off. (was: Re: Linux 2.6.38-rc4)
  2011-02-14 14:51             ` Yong Zhang
@ 2011-02-14 18:53               ` Thomas Gleixner
  0 siblings, 0 replies; 62+ messages in thread
From: Thomas Gleixner @ 2011-02-14 18:53 UTC (permalink / raw)
  To: Yong Zhang
  Cc: Peter Zijlstra, Borislav Petkov, Linus Torvalds,
	Linux Kernel Mailing List, x86, Ingo Molnar, Andrew Morton

On Mon, 14 Feb 2011, Yong Zhang wrote:

> On Tue, Feb 08, 2011 at 03:18:00PM +0100, Peter Zijlstra wrote:
> > Subject: lockdep, timer: Revert the del_timer_sync() annotation
> > 
> > Both attempts at trying to allow softirq usage failed, revert for this
> > release and try again later.
> > 
> > Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
> > ---
> >  kernel/timer.c |    8 +++-----
> >  1 files changed, 3 insertions(+), 5 deletions(-)
> > 
> > diff --git a/kernel/timer.c b/kernel/timer.c
> > index 343ff27..c848cd8 100644
> > --- a/kernel/timer.c
> > +++ b/kernel/timer.c
> > @@ -959,7 +959,7 @@ EXPORT_SYMBOL(try_to_del_timer_sync);
> >   *
> >   * Synchronization rules: Callers must prevent restarting of the timer,
> >   * otherwise this function is meaningless. It must not be called from
> > - * hardirq contexts. The caller must not hold locks which would prevent
> > + * interrupt contexts. The caller must not hold locks which would prevent
> 
> I think we don't need to revert this comment.

That does not matter. It breaks stuff left and right and we need to go
back to the old (maybe less broken) state in that phase of -rc. It's
that simple.
 
> >   * completion of the timer's handler. The timer's handler must not call
> >   * add_timer_on(). Upon exit the timer is not queued and the handler is
> >   * not running on any CPU.
> > @@ -971,12 +971,10 @@ int del_timer_sync(struct timer_list *timer)
> >  #ifdef CONFIG_LOCKDEP
> >  	unsigned long flags;
> >  
> > -	raw_local_irq_save(flags);
> > -	local_bh_disable();
> > +	local_irq_save(flags);
> 
> Going back to local_irq_save()/local_irq_restore() doesn't prevent
> it from using in softirq context.

That does not matter. It goes back to status quo and does not
introduce new problems. As the changelog says:

> > Both attempts at trying to allow softirq usage failed, revert for this
> > release and try again later.

So it's not forgotten. It's just not fixable right now.

Thanks,

	tglx

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Heads up Linux 2.6.38-rc4 compile problems.
  2011-02-14 18:08                           ` Linus Torvalds
@ 2011-02-14 19:44                             ` Eric W. Biederman
  2011-02-14 20:13                               ` Andrew Morton
  0 siblings, 1 reply; 62+ messages in thread
From: Eric W. Biederman @ 2011-02-14 19:44 UTC (permalink / raw)
  To: Linus Torvalds
  Cc: Alex Riesen, David Miller, Linux Kernel Mailing List, Andrew Morton

Linus Torvalds <torvalds@linux-foundation.org> writes:

> On Mon, Feb 14, 2011 at 9:49 AM, Linus Torvalds
> <torvalds@linux-foundation.org> wrote:
>>
>> Btw, can you just make that 'vmlinux' image [..]
>
> .. actually, since you have lots of modules, the .config file is a
> much better option. If it's in some module, the vmlinux file won't
> contain it.
>
> (Although best guess would be for it to be some core data structure,
> so who knows?)

Yeah I will get you the whole pile of rpms with everything in them
in a bit.  

Meanwhile.

With CONFIG_DEBUG_PAGEALLOC I don't have a kernel that successfully
boots.  I am having trouble reading the output, and it doesn't look like
it is consistently failing in the same place.

My three boot attempts with CONFIG_DEBUG_PAGEALLOC are below.

Eric


ERROR: kmemcheck: Fatal error
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
IP: [<ffffffff810df982>] perf_event_update_userpage+0x42/0xe0
Oops: 0002 [#1] SMP 
last sysfs file: 
Stack:
Call Trace:
 <NMI> 
 <<EOE>> 
 <#DB> 
 <<EOE>> 
Code: 48 89 fb 48 c7 c7 c0 a3 a1 81 48 83 ec 18 48 c7 04 24 40 f9 0d 81 e8 be 79 fa ff 48 8b 83 e8 02 00 00 48 85 c0 74 57 48 8b 40 58 <83> 40 08 01 31 d2 f6 83 30 01 00 00 01 8b 4b 58 8b b3 10 01 00 
RIP  [<ffffffff810df982>] perf_event_update_userpage+0x42/0xe0
CR2: 0000000000000008
Kernel panic - not syncing: Attempted to kill init!



Then when I crank the loglevel up to 8 I see.
..........................................................................................................
root (hd0,0)
 Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz-2.6.38-rc4-357858.2010AroraKernelBeta.fc14.x86_64 ro root=
LABEL=/ rhgb quiet crashkernel=128M rd_NO_PLYMOUTH console=tty0 console=ttyS0,9
600 LANG=en_US.UTF-8 loglevel=8
   [Linux-bzImage, setup=0x3800, size=0x3ebb90]
initrd /boot/initramfs-2.6.38-rc4-357858.2010AroraKernelBeta.fc14.x86_64.img
   [Linux-initrd @ 0x36d47000, 0x12a8eb7 bytes]

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.38-rc4-357858.2010AroraKernelBeta.fc14.x86_64 (arastra@local288.aristanetworks.com) (gcc version 4.5.1 20100924 (Red Hat 4.5.1-4) (GCC) ) #1 SMP Mon Feb 14 09:30:51 PST 2011
Command line: ro root=LABEL=/ rhgb quiet crashkernel=128M rd_NO_PLYMOUTH console=tty0 console=ttyS0,9600 LANG=en_US.UTF-8 loglevel=8
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
 BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000cfef0000 (usable)
 BIOS-e820: 00000000cfef0000 - 00000000cff04000 (ACPI data)
 BIOS-e820: 00000000cff04000 - 00000000cff05000 (ACPI NVS)
 BIOS-e820: 00000000cff05000 - 00000000d0000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 00000002b0000000 (usable)
NX (Execute Disable) protection: active
DMI present.
DMI: X7DWU/X7DWU, BIOS  1.2 11/04/2008
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x2b0000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-E3FFF uncachable
  E4000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 00D0000000 mask 3FF0000000 uncachable
  1 base 00E0000000 mask 3FE0000000 uncachable
  2 base 0000000000 mask 3E00000000 write-back
  3 base 0200000000 mask 3F80000000 write-back
  4 base 0280000000 mask 3FE0000000 write-back
  5 base 02A0000000 mask 3FF0000000 write-back
  6 base 00CFF80000 mask 3FFFF80000 uncachable
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000cff80000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcfef0 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000f68b0] f68b0
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000cfef0000
 0000000000 - 00cfef0000 page 4k
kernel direct mapping tables up to cfef0000 @ 1f97b000-20000000
init_memory_mapping: 0000000100000000-00000002b0000000
 0100000000 - 02b0000000 page 4k
kernel direct mapping tables up to 2b0000000 @ ce964000-cfef0000
RAMDISK: 36d47000 - 37ff0000
Reserving 128MB of memory at 736MB for crashkernel (System RAM: 11008MB)
ACPI: RSDP 00000000000f6880 00024 (v02 PTLTD )
ACPI: XSDT 00000000cfefcef6 000D4 (v01 PTLTD  ? XSDT   06040000  LTP 00000000)
ACPI: FACP 00000000cff033a8 000F4 (v03 INTEL  STOAKLEY 06040000 PTL  00000003)
ACPI: DSDT 00000000cfefeab8 0487C (v01  Intel SEABURG  06040000 MSFT 03000001)
ACPI: FACS 00000000cff04fc0 00040
ACPI: _MAR 00000000cff0349c 00030 (v01 Intel  OEMDMAR  06040000 LOHR 00000001)
ACPI: TCPA 00000000cff034cc 00032 (v01 Intel  STOAKLEY 06040000 LOHR 0000005A)
ACPI: APIC 00000000cff034fe 000C8 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
ACPI: MCFG 00000000cff035c6 0003C (v01 PTLTD    MCFG   06040000  LTP 00000000)
ACPI: HPET 00000000cff03602 00038 (v01 PTLTD  HPETTBL  06040000  LTP 00000001)
ACPI: BOOT 00000000cff0363a 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
ACPI: SPCR 00000000cff03662 00050 (v01 PTLTD  $UCRTBL$ 06040000 PTL  00000001)
ACPI: ERST 00000000cff036b2 00590 (v01 SMCI   ERSTTBL  06040000 SMCI 00000001)
ACPI: HEST 00000000cff03c42 000A8 (v01 SMCI   HESTTBL  06040000 SMCI 00000001)
ACPI: BERT 00000000cff03cea 00030 (v01 SMCI   BERTTBL  06040000 SMCI 00000001)
ACPI: EINJ 00000000cff03d1a 00170 (v01 SMCI   EINJTBL  06040000 SMCI 00000001)
ACPI: SLIC 00000000cff03e8a 00176 (v01 OEM_ID OEMTABLE 06040000  LTP 00000000)
ACPI: SSDT 00000000cfefe859 0025F (v01  PmRef  Cpu0Tst 00003000 INTL 20050228)
ACPI: SSDT 00000000cfefe7b3 000A6 (v01  PmRef  Cpu7Tst 00003000 INTL 20050228)
ACPI: SSDT 00000000cfefe70d 000A6 (v01  PmRef  Cpu6Tst 00003000 INTL 20050228)
ACPI: SSDT 00000000cfefe667 000A6 (v01  PmRef  Cpu5Tst 00003000 INTL 20050228)
ACPI: SSDT 00000000cfefe5c1 000A6 (v01  PmRef  Cpu4Tst 00003000 INTL 20050228)
ACPI: SSDT 00000000cfefe51b 000A6 (v01  PmRef  Cpu3Tst 00003000 INTL 20050228)
ACPI: SSDT 00000000cfefe475 000A6 (v01  PmRef  Cpu2Tst 00003000 INTL 20050228)
ACPI: SSDT 00000000cfefe3cf 000A6 (v01  PmRef  Cpu1Tst 00003000 INTL 20050228)
ACPI: SSDT 00000000cfefcfca 01405 (v01  PmRef    CpuPm 00003000 INTL 20050228)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-00000002b0000000
Initmem setup node 0 0000000000000000-00000002b0000000
  NODE_DATA [00000002affec000 - 00000002afffffff]
 [ffffea0000000000-ffffea000abfffff] PMD -> [ffff8802a5e00000-ffff8802afdfffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x002b0000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000010 -> 0x0000009d
    0: 0x00000100 -> 0x000cfef0
    0: 0x00100000 -> 0x002b0000
On node 0 totalpages: 2621053
  DMA zone: 64 pages used for memmap
  DMA zone: 6 pages reserved
  DMA zone: 3911 pages, LIFO batch:0
  DMA32 zone: 16320 pages used for memmap
  DMA32 zone: 831280 pages, LIFO batch:31
  Normal zone: 27648 pages used for memmap
  Normal zone: 1741824 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec89000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec89000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000cfef0000 - 00000000cff04000
PM: Registered nosave memory: 00000000cff04000 - 00000000cff05000
PM: Registered nosave memory: 00000000cff05000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff8800cfc00000 s77056 r8192 d21248 u262144
pcpu-alloc: s77056 r8192 d21248 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2577015
Policy zone: Normal
Kernel command line: ro root=LABEL=/ rhgb quiet crashkernel=128M rd_NO_PLYMOUTH console=tty0 console=ttyS0,9600 LANG=en_US.UTF-8 loglevel=8
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 10058856k/11272192k available (4972k kernel code, 787980k absent, 425356k reserved, 5824k data, 1308k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
	RCU-based detection of stalled CPUs is disabled.
NR_IRQS:4352 nr_irqs:1152 16
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES:  8
... MAX_LOCK_DEPTH:          48
... MAX_LOCKDEP_KEYS:        8191
... CLASSHASH_SIZE:          4096
... MAX_LOCKDEP_ENTRIES:     16384
... MAX_LOCKDEP_CHAINS:      32768
... CHAINHASH_SIZE:          16384
 memory used by lock dependency info: 5855 kB
 per task-struct memory footprint: 1920 bytes
allocated 104857600 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2500.101 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5000.20 BogoMIPS (lpj=10000404)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20110112
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU           E5420  @ 2.50GHz stepping 06
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
kmemcheck: Limiting number of CPUs to 1.
kmemcheck: Initialized
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 1 CPUs
Total of 1 processors activated (5000.20 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-09] at [mem 0xe0000000-0xe09fffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe09fffff] reserved in E820
PCI: Using configuration type 1 for base access
------------[ cut here ]------------
------------[ cut here ]------------
WARNING: at arch/x86/mm/kmemcheck/kmemcheck.c:634 kmemcheck_fault+0xb9/0xd0()
Hardware name: X7DWU
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.38-rc4-357858.2010AroraKernelBeta.fc14.x86_64 #1
Call Trace:
 <NMI>  [<ffffffff8104eeaa>] ? warn_slowpath_common+0x7a/0xb0
 [<ffffffff8104eef5>] ? warn_slowpath_null+0x15/0x20
 [<ffffffff81037d39>] ? kmemcheck_fault+0xb9/0xd0
 [<ffffffff814d4eed>] ? do_page_fault+0x41d/0x560
 [<ffffffff814d0528>] ? trace_hardirqs_off_thunk+0x3a/0x3c
 [<ffffffff814d15a5>] ? page_fault+0x25/0x30
 [<ffffffff81318f57>] ? vt_console_print+0xa7/0x390
 [<ffffffff81318f1c>] ? vt_console_print+0x6c/0x390
 [<ffffffff8104f025>] ? __call_console_drivers+0x75/0x90
 [<ffffffff8104f085>] ? _call_console_drivers+0x45/0x70
 [<ffffffff8104f59e>] ? console_unlock+0x11e/0x250
 [<ffffffff8104f9ee>] ? vprintk+0x1fe/0x4c0
 [<ffffffff81037d39>] ? kmemcheck_fault+0xb9/0xd0
 [<ffffffff814cd50c>] ? printk+0x3c/0x40
 [<ffffffff81037d39>] ? kmemcheck_fault+0xb9/0xd0
 [<ffffffff8104ee68>] ? warn_slowpath_common+0x38/0xb0
 [<ffffffff8104eef5>] ? warn_slowpath_null+0x15/0x20
 [<ffffffff81037d39>] ? kmemcheck_fault+0xb9/0xd0
 [<ffffffff814d4eed>] ? do_page_fault+0x41d/0x560
 [<ffffffff814d0528>] ? trace_hardirqs_off_thunk+0x3a/0x3c
 [<ffffffff814d15a5>] ? page_fault+0x25/0x30
 [<ffffffff81011bf8>] ? x86_perf_event_update+0x28/0xc0
 [<ffffffff81015ffc>] ? intel_pmu_handle_irq+0x1fc/0x4b0
 [<ffffffff814d2b78>] ? perf_event_nmi_handler+0x58/0xe0
 [<ffffffff814d507d>] ? notifier_call_chain+0x4d/0x70
 [<ffffffff814d5107>] ? __atomic_notifier_call_chain+0x67/0xa0
 [<ffffffff814d50a0>] ? __atomic_notifier_call_chain+0x0/0xa0
 [<ffffffff811a72cc>] ? sysfs_new_dirent+0x3c/0x120
 [<ffffffff814d5151>] ? atomic_notifier_call_chain+0x11/0x20
 [<ffffffff814d518e>] ? notify_die+0x2e/0x30
 [<ffffffff814d1d92>] ? do_nmi+0xd2/0x290
 [<ffffffff814d18f0>] ? nmi+0x20/0x39
 [<ffffffff811a72cc>] ? sysfs_new_dirent+0x3c/0x120
 [<ffffffff8112e60e>] ? kmem_cache_alloc+0x3e/0x160
 [<ffffffff814d1580>] ? page_fault+0x0/0x30
 <<EOE>>  [<ffffffff8112e626>] ? kmem_cache_alloc+0x56/0x160
 [<ffffffff811a72cc>] ? sysfs_new_dirent+0x3c/0x120
 [<ffffffff811a6838>] ? sysfs_add_file_mode+0x38/0xc0
 [<ffffffff811a68cc>] ? sysfs_add_file+0xc/0x10
 [<ffffffff811a69a1>] ? sysfs_create_file+0x21/0x30
 [<ffffffff81338314>] ? device_create_file+0x14/0x20
 [<ffffffff81338cb8>] ? device_add+0x128/0x650
 [<ffffffff813391f9>] ? device_register+0x19/0x20
 [<ffffffff813392fb>] ? device_create_vargs+0xfb/0x130
 [<ffffffff81abdc97>] ? default_bdi_init+0x0/0xaf
 [<ffffffff8110308f>] ? bdi_register+0x6f/0x1c0
 [<ffffffff8127c183>] ? prop_local_init_percpu+0x43/0x50
 [<ffffffff81abdc97>] ? default_bdi_init+0x0/0xaf
 [<ffffffff81abdd36>] ? default_bdi_init+0x9f/0xaf
 [<ffffffff810002ff>] ? do_one_initcall+0x3f/0x180
 [<ffffffff81aa0dc6>] ? kernel_init+0x17c/0x205
 [<ffffffff81003c24>] ? kernel_thread_helper+0x4/0x10
 [<ffffffff814d1394>] ? restore_args+0x0/0x30
 [<ffffffff81aa0c4a>] ? kernel_init+0x0/0x205
 [<ffffffff81003c20>] ? kernel_thread_helper+0x0/0x10
---[ end trace a7919e7f17c0a725 ]---
WARNING: at arch/x86/mm/kmemcheck/kmemcheck.c:634 kmemcheck_fault+0xb9/0xd0()
Hardware name: X7DWU
Modules linked in:
Pid: 1, comm: swapper Tainted: G        W   2.6.38-rc4-357858.2010AroraKernelBeta.fc14.x86_64 #1
Call Trace:
 <NMI>  [<ffffffff8104eeaa>] ? warn_slowpath_common+0x7a/0xb0
 [<ffffffff8104eef5>] ? warn_slowpath_null+0x15/0x20
 [<ffffffff81037d39>] ? kmemcheck_fault+0xb9/0xd0
 [<ffffffff814d4eed>] ? do_page_fault+0x41d/0x560
 [<ffffffff814d0528>] ? trace_hardirqs_off_thunk+0x3a/0x3c
 [<ffffffff814d15a5>] ? page_fault+0x25/0x30
 [<ffffffff81011bf8>] ? x86_perf_event_update+0x28/0xc0
 [<ffffffff81015ffc>] ? intel_pmu_handle_irq+0x1fc/0x4b0
 [<ffffffff814d2b78>] ? perf_event_nmi_handler+0x58/0xe0
 [<ffffffff814d507d>] ? notifier_call_chain+0x4d/0x70
 [<ffffffff814d5107>] ? __atomic_notifier_call_chain+0x67/0xa0
 [<ffffffff814d50a0>] ? __atomic_notifier_call_chain+0x0/0xa0
 [<ffffffff811a72cc>] ? sysfs_new_dirent+0x3c/0x120
 [<ffffffff814d5151>] ? atomic_notifier_call_chain+0x11/0x20
 [<ffffffff814d518e>] ? notify_die+0x2e/0x30
 [<ffffffff814d1d92>] ? do_nmi+0xd2/0x290
 [<ffffffff814d18f0>] ? nmi+0x20/0x39
 [<ffffffff811a72cc>] ? sysfs_new_dirent+0x3c/0x120
 [<ffffffff8112e60e>] ? kmem_cache_alloc+0x3e/0x160
 [<ffffffff814d1580>] ? page_fault+0x0/0x30
 <<EOE>>  [<ffffffff8112e626>] ? kmem_cache_alloc+0x56/0x160
 [<ffffffff811a72cc>] ? sysfs_new_dirent+0x3c/0x120
 [<ffffffff811a6838>] ? sysfs_add_file_mode+0x38/0xc0
 [<ffffffff811a68cc>] ? sysfs_add_file+0xc/0x10
 [<ffffffff811a69a1>] ? sysfs_create_file+0x21/0x30
 [<ffffffff81338314>] ? device_create_file+0x14/0x20
 [<ffffffff81338cb8>] ? device_add+0x128/0x650
 [<ffffffff813391f9>] ? device_register+0x19/0x20
 [<ffffffff813392fb>] ? device_create_vargs+0xfb/0x130
 [<ffffffff81abdc97>] ? default_bdi_init+0x0/0xaf
 [<ffffffff8110308f>] ? bdi_register+0x6f/0x1c0
 [<ffffffff8127c183>] ? prop_local_init_percpu+0x43/0x50
 [<ffffffff81abdc97>] ? default_bdi_init+0x0/0xaf
 [<ffffffff81abdd36>] ? default_bdi_init+0x9f/0xaf
 [<ffffffff810002ff>] ? do_one_initcall+0x3f/0x180
 [<ffffffff81aa0dc6>] ? kernel_init+0x17c/0x205
 [<ffffffff81003c24>] ? kernel_thread_helper+0x4/0x10
 [<ffffffff814d1394>] ? restore_args+0x0/0x30
 [<ffffffff81aa0c4a>] ? kernel_init+0x0/0x205
 [<ffffffff81003c20>] ? kernel_thread_helper+0x0/0x10
---[ end trace a7919e7f17c0a726 ]---
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
\_SB_:_OSC evaluation returned wrong type
_OSC request data:1 7 
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000cc000-0x000cffff]
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff]
pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff]
pci 0000:00:00.0: [8086:4003] type 0 class 0x000600
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: [8086:4021] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: [8086:4023] type 1 class 0x000604
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:05.0: [8086:4025] type 1 class 0x000604
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:07.0: [8086:4027] type 1 class 0x000604
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:09.0: [8086:4029] type 1 class 0x000604
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0f.0: [8086:402f] type 0 class 0x000880
pci 0000:00:0f.0: reg 10: [mem 0xfe700000-0xfe703fff 64bit]
pci 0000:00:10.0: [8086:4030] type 0 class 0x000600
pci 0000:00:10.1: [8086:4030] type 0 class 0x000600
pci 0000:00:10.2: [8086:4030] type 0 class 0x000600
pci 0000:00:10.3: [8086:4030] type 0 class 0x000600
pci 0000:00:10.4: [8086:4030] type 0 class 0x000600
pci 0000:00:11.0: [8086:4031] type 0 class 0x000600
pci 0000:00:15.0: [8086:4035] type 0 class 0x000600
pci 0000:00:15.1: [8086:4035] type 0 class 0x000600
pci 0000:00:16.0: [8086:4036] type 0 class 0x000600
------------[ cut here ]------------
WARNING: at kernel/lockdep.c:2465 lockdep_trace_alloc+0xcc/0xe0()
Hardware name: X7DWU
Modules linked in:
Pid: 1, comm: swapper Tainted: G        W   2.6.38-rc4-357858.2010AroraKernelBeta.fc14.x86_64 #1
Call Trace:
 [<ffffffff8104eeaa>] ? warn_slowpath_common+0x7a/0xb0
 [<ffffffff8104eef5>] ? warn_slowpath_null+0x15/0x20
 [<ffffffff810883dc>] ? lockdep_trace_alloc+0xcc/0xe0
 [<ffffffff8112ca3c>] ? __kmalloc+0x4c/0x190
 [<ffffffff81284f77>] ? kvasprintf+0x57/0x90
 [<ffffffff81284f77>] ? kvasprintf+0x57/0x90
 [<ffffffff81279eda>] ? kobject_set_name_vargs+0x3a/0x80
 [<ffffffff81337cbc>] ? dev_set_name+0x3c/0x40
 [<ffffffff81297301>] ? pci_setup_device+0x131/0x410
 [<ffffffff814bc873>] ? pci_scan_single_device+0xf3/0x160
 [<ffffffff81296820>] ? next_trad_fn+0x0/0x10
 [<ffffffff8129777c>] ? pci_scan_slot+0xac/0x130
 [<ffffffff814be568>] ? pci_scan_child_bus+0x29/0xb1
 [<ffffffff81296565>] ? pci_bus_add_resource+0x55/0xa0
 [<ffffffff814c395e>] ? pci_acpi_scan_root+0x2a4/0x2fb
 [<ffffffff814c0e0a>] ? acpi_pci_root_add+0x197/0x33a
 [<ffffffff812ca5a7>] ? acpi_device_probe+0x0/0x185
 [<ffffffff812ca5f2>] ? acpi_device_probe+0x4b/0x185
 [<ffffffff8133bc36>] ? driver_probe_device+0x96/0x1c0
 [<ffffffff8133be03>] ? __driver_attach+0xa3/0xb0
 [<ffffffff8133bd60>] ? __driver_attach+0x0/0xb0
 [<ffffffff8133a8fe>] ? bus_for_each_dev+0x5e/0x90
 [<ffffffff8133b899>] ? driver_attach+0x19/0x20
 [<ffffffff8133b443>] ? bus_add_driver+0xc3/0x280
 [<ffffffff81acc931>] ? acpi_pci_root_init+0x0/0x2d
 [<ffffffff8133c081>] ? driver_register+0x71/0x140
 [<ffffffff81acc931>] ? acpi_pci_root_init+0x0/0x2d
 [<ffffffff812cad36>] ? acpi_bus_register_driver+0x3e/0x40
 [<ffffffff81acc956>] ? acpi_pci_root_init+0x25/0x2d
 [<ffffffff810002ff>] ? do_one_initcall+0x3f/0x180
 [<ffffffff81aa0dc6>] ? kernel_init+0x17c/0x205
 [<ffffffff81003c24>] ? kernel_thread_helper+0x4/0x10
 [<ffffffff814d1394>] ? restore_args+0x0/0x30
 [<ffffffff81aa0c4a>] ? kernel_init+0x0/0x205
 [<ffffffff81003c20>] ? kernel_thread_helper+0x0/0x10
---[ end trace a7919e7f17c0a727 ]---
pci 0000:00:16.1: [8086:4036] type 0 class 0x000600
ERROR: kmemcheck: Fatal error

Pid: 1, comm: swapper Tainted: G        W   2.6.38-rc4-357858.2010AroraKernelBeta.fc14.x86_64 #1 X7DWU/X7DWU
RIP: 0010:[<ffffffff8112c880>]  [<ffffffff8112c880>] kmem_cache_alloc_trace+0x90/0x160
RSP: 0018:ffff880299ccbaf0  EFLAGS: 00010106
RAX: ffff880299edd000 RBX: ffff8802a58039c0 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 00000000007fffff RDI: ffff880299ede000
RBP: ffff880299ccbb30 R08: 0000000000000000 R09: ffff880299edd000
R10: 0000000000000002 R11: 0000000000000001 R12: ffff880299edd000
R13: 00000000000080d0 R14: 0000000000000286 R15: ffffffff81296b2f
FS:  0000000000000000(0000) GS:ffff8800cfc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffff880299c98810 CR3: 0000000001a03000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff4ff0 DR7: 0000000000000400
 [<ffffffff810370c4>] kmemcheck_error_save_bug+0x74/0xb0
 [<ffffffff8103790b>] kmemcheck_show+0x8b/0xa0
 [<ffffffff81037d0a>] kmemcheck_fault+0x8a/0xd0
 [<ffffffff814d4eed>] do_page_fault+0x41d/0x560
 [<ffffffff814d15a5>] page_fault+0x25/0x30
 [<ffffffff81296b2f>] alloc_pci_dev+0x1f/0x40
 [<ffffffff814bc84b>] pci_scan_single_device+0xcb/0x160
 [<ffffffff8129777c>] pci_scan_slot+0xac/0x130
 [<ffffffff814be568>] pci_scan_child_bus+0x29/0xb1
 [<ffffffff814c395e>] pci_acpi_scan_root+0x2a4/0x2fb
 [<ffffffff814c0e0a>] acpi_pci_root_add+0x197/0x33a
 [<ffffffff812ca5f2>] acpi_device_probe+0x4b/0x185
 [<ffffffff8133bc36>] driver_probe_device+0x96/0x1c0
 [<ffffffff8133be03>] __driver_attach+0xa3/0xb0
 [<ffffffff8133a8fe>] bus_for_each_dev+0x5e/0x90
 [<ffffffff8133b899>] driver_attach+0x19/0x20
 [<ffffffff8133b443>] bus_add_driver+0xc3/0x280
 [<ffffffff8133c081>] driver_register+0x71/0x140
 [<ffffffff812cad36>] acpi_bus_register_driver+0x3e/0x40
 [<ffffffff81acc956>] acpi_pci_root_init+0x25/0x2d
 [<ffffffff810002ff>] do_one_initcall+0x3f/0x180
 [<ffffffff81aa0dc6>] kernel_init+0x17c/0x205
 [<ffffffff81003c24>] kernel_thread_helper+0x4/0x10
 [<ffffffffffffffff>] 0xffffffffffffffff
pci 0000:00:1d.0: [8086:2688] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io  0x1800-0x181f]
pci 0000:00:1d.1: [8086:2689] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io  0x1820-0x183f]
pci 0000:00:1d.2: [8086:268a] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io  0x1840-0x185f]
pci 0000:00:1d.3: [8086:268b] type 0 class 0x000c03
pci 0000:00:1d.3: reg 20: [io  0x1860-0x187f]
pci 0000:00:1d.7: [8086:268c] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xdc904000-0xdc9043ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:2670] type 0 class 0x000601
pci 0000:00:1f.1: [8086:269e] type 0 class 0x000101
pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
pci 0000:00:1f.1: reg 20: [io  0x1880-0x188f]
pci 0000:00:1f.2: [8086:2680] type 0 class 0x000101
pci 0000:00:1f.2: reg 10: [io  0x18c0-0x18c7]
pci 0000:00:1f.2: reg 14: [io  0x18b8-0x18bb]
pci 0000:00:1f.2: reg 18: [io  0x18b0-0x18b7]
pci 0000:00:1f.2: reg 1c: [io  0x1894-0x1897]
pci 0000:00:1f.2: reg 20: [io  0x18a0-0x18af]
pci 0000:00:1f.2: reg 24: [mem 0xdc904400-0xdc9047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:269b] type 0 class 0x000c05
pci 0000:00:1f.3: reg 20: [io  0x1100-0x111f]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:01.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:01.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: [8086:3500] type 1 class 0x000604
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.3: [8086:350c] type 1 class 0x000604
pci 0000:02:00.3: PME# supported from D0 D3hot D3cold
pci 0000:02:00.3: PME# disabled
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:03.0: PCI bridge to [bus 02-05]
pci 0000:00:03.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:03.0:   bridge window [mem 0xdc500000-0xdc5fffff]
pci 0000:00:03.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: [8086:3510] type 1 class 0x000604
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:02:00.0: PCI bridge to [bus 03-04]
pci 0000:02:00.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:02:00.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:02:00.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: PCI bridge to [bus 04-04]
pci 0000:03:00.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:03:00.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:03:00.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.3: PCI bridge to [bus 05-05]
pci 0000:02:00.3:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:02:00.3:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:02:00.3:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:06:00.0: [4040:0100] type 0 class 0x000200
pci 0000:06:00.0: reg 10: [mem 0xdc000000-0xdc1fffff 64bit]
pci 0000:06:00.0: reg 20: [mem 0xd8000000-0xd9ffffff 64bit]
pci 0000:06:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:06:00.1: [4040:0100] type 0 class 0x000200
pci 0000:06:00.1: reg 10: [mem 0xdc200000-0xdc3fffff 64bit]
pci 0000:06:00.1: reg 20: [mem 0xda000000-0xdbffffff 64bit]
pci 0000:06:00.1: PME# supported from D0 D3hot D3cold
pci 0000:06:00.1: PME# disabled
pci 0000:00:05.0: PCI bridge to [bus 06-06]
pci 0000:00:05.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:05.0:   bridge window [mem 0xd8000000-0xdc3fffff]
pci 0000:00:05.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:07.0: PCI bridge to [bus 07-07]
pci 0000:00:07.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:07.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:07.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:08:00.0: [8086:10a7] type 0 class 0x000200
pci 0000:08:00.0: reg 10: [mem 0xdc420000-0xdc43ffff]
pci 0000:08:00.0: reg 14: [mem 0xdc400000-0xdc41ffff]
pci 0000:08:00.0: reg 18: [io  0x2000-0x201f]
pci 0000:08:00.0: reg 1c: [mem 0xdc480000-0xdc483fff]
pci 0000:08:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:08:00.0: PME# disabled
pci 0000:08:00.1: [8086:10a7] type 0 class 0x000200
pci 0000:08:00.1: reg 10: [mem 0xdc460000-0xdc47ffff]
pci 0000:08:00.1: reg 14: [mem 0xdc440000-0xdc45ffff]
pci 0000:08:00.1: reg 18: [io  0x2020-0x203f]
pci 0000:08:00.1: reg 1c: [mem 0xdc484000-0xdc487fff]
pci 0000:08:00.1: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:08:00.1: PME# supported from D0 D3hot D3cold
pci 0000:08:00.1: PME# disabled
pci 0000:00:09.0: PCI bridge to [bus 08-08]
pci 0000:00:09.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:09.0:   bridge window [mem 0xdc400000-0xdc4fffff]
pci 0000:00:09.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:09:01.0: [1002:515e] type 0 class 0x000300
pci 0000:09:01.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
pci 0000:09:01.0: reg 14: [io  0x3000-0x30ff]
pci 0000:09:01.0: reg 18: [mem 0xdc600000-0xdc60ffff]
pci 0000:09:01.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:09:01.0: supports D1 D2
pci 0000:00:1e.0: PCI bridge to [bus 09-09] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1e.0:   bridge window [mem 0xdc600000-0xdc6fffff]
pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000cc000-0x000cffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3.BMF0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3.BMF0.BPD0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
BUG: unable to handle kernel NULL pointer dereference at 0000000000000200
IP: [<ffffffff8101484b>] intel_pmu_enable_all+0xab/0x110
PGD 0 
Oops: 0000 [#1] SMP 
last sysfs file: 
CPU 0 
Modules linked in:

Pid: 1, comm: swapper Tainted: G        W   2.6.38-rc4-357858.2010AroraKernelBeta.fc14.x86_64 #1 X7DWU/X7DWU
RIP: 0010:[<ffffffff8101484b>]  [<ffffffff8101484b>] intel_pmu_enable_all+0xab/0x110
RSP: 0018:ffff8800cfc07cf8  EFLAGS: 00010292
RAX: ffff880299cd0000 RBX: ffff880299c98800 RCX: 0000000000000002
RDX: ffff880299cd0000 RSI: 0000000000000001 RDI: 0000000000000246
RBP: ffff8800cfc07d28 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
R13: ffffffff80000001 R14: 0000000080000001 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff8800cfc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffff8802a58182e4 CR3: 0000000001a03000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff4ff0 DR7: 0000000000000400
BUG: unable to handle kernel paging request at 0000000181037f51
IP: [<ffffffff81038420>] kmemcheck_shadow_set+0x10/0x20
PGD 0 
Oops: 0002 [#2] SMP 
last sysfs file: 
CPU 0 
Modules linked in:

Pid: 1, comm: swapper Tainted: G        W   2.6.38-rc4-357858.2010AroraKernelBeta.fc14.x86_64 #1 X7DWU/X7DWU
RIP: 0010:[<ffffffff81038420>]  [<ffffffff81038420>] kmemcheck_shadow_set+0x10/0x20
RSP: 0018:ffff8800cfc079d8  EFLAGS: 00010082
RAX: 000000020206ffa6 RBX: 0000000181037f51 RCX: ffff880299c98000
RDX: 0000000081038055 RSI: 0000000081038054 RDI: 0000000181037f51
RBP: ffff8800cfc079d8 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000001 R11: 0000000000000000 R12: ffff8800cfc079d8
R13: ffffffff81038055 R14: ffff880299c98000 R15: ffff880299c98ae8
FS:  0000000000000000(0000) GS:ffff8800cfc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffff880299c98910 CR3: 0000000001a03000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff4ff0 DR7: 0000000000000400
Process swapper (pid: 1, threadinfo ffff880299cca000, task ffff880299cd0000)

RIP  [<ffff8800cfc079c8>] 0xffff8800cfc079c8
 RSP <00000001cfc079d8>
CR2: 0000000181037f51
---[ end trace a7919e7f17c0a728 ]---
swapper used greatest stack depth: 2752 bytes left
Kernel panic - not syncing: Attempted to kill init!
Pid: 1, comm: swapper Tainted: G      D W   2.6.38-rc4-357858.2010AroraKernelBeta.fc14.x86_64 #1
Call Trace:
 <NMI>  [<ffffffff814cd3b6>] ? panic+0x79/0x193
 [<ffffffff810533eb>] ? do_exit+0x7fb/0x8d0
 [<ffffffff814d23d5>] ? oops_end+0xa5/0xf0
 [<ffffffff81030c70>] ? no_context+0xf0/0x260
 [<ffffffff81030f05>] ? __bad_area_nosemaphore+0x125/0x1e0
 [<ffffffff81038055>] ? kmemcheck_shadow_lookup+0x45/0x70
 [<ffffffff81030fce>] ? bad_area_nosemaphore+0xe/0x10
 [<ffffffff814d4f52>] ? do_page_fault+0x482/0x560
 [<ffffffff814d0528>] ? trace_hardirqs_off_thunk+0x3a/0x3c
 [<ffffffff814d0528>] ? trace_hardirqs_off_thunk+0x3a/0x3c
 [<ffffffff81038055>] ? kmemcheck_shadow_lookup+0x45/0x70
 [<ffffffff814d15a5>] ? page_fault+0x25/0x30
 [<ffffffff81038055>] ? kmemcheck_shadow_lookup+0x45/0x70
 [<ffffffff81037f51>] ? kmemcheck_pte_lookup+0x11/0x50
 [<ffffffff81038055>] ? kmemcheck_shadow_lookup+0x45/0x70
 [<ffffffff81037177>] ? kmemcheck_read_strict+0x47/0xb0
 [<ffffffff81011bf8>] ? x86_perf_event_update+0x28/0xc0
 [<ffffffff81037225>] ? kmemcheck_read+0x45/0x70
 [<ffffffff81037f51>] ? kmemcheck_pte_lookup+0x11/0x50
 [<ffffffff810372e6>] ? kmemcheck_show_addr+0x46/0x70
 [<ffffffff810377c9>] ? kmemcheck_show_all+0x39/0x60
 [<ffffffff810378bc>] ? kmemcheck_show+0x3c/0xa0
 [<ffffffff81037d0a>] ? kmemcheck_fault+0x8a/0xd0
 [<ffffffff814d4eed>] ? do_page_fault+0x41d/0x560
 [<ffffffff814d0528>] ? trace_hardirqs_off_thunk+0x3a/0x3c
 [<ffffffff814d0528>] ? trace_hardirqs_off_thunk+0x3a/0x3c
 [<ffffffff814d0528>] ? trace_hardirqs_off_thunk+0x3a/0x3c
 [<ffffffff814d1850>] ? error_exit+0x30/0xb0
 [<ffffffff810df9ed>] ? perf_event_update_userpage+0xad/0xe0
 [<ffffffff810df940>] ? perf_event_update_userpage+0x0/0xe0
 [<ffffffff81011c36>] ? x86_perf_event_update+0x66/0xc0
 [<ffffffff81014849>] ? intel_pmu_enable_all+0xa9/0x110
 [<ffffffff8101606e>] ? intel_pmu_handle_irq+0x26e/0x4b0
 [<ffffffff814d2b78>] ? perf_event_nmi_handler+0x58/0xe0
 [<ffffffff814d507d>] ? notifier_call_chain+0x4d/0x70
 [<ffffffff814d5121>] ? __atomic_notifier_call_chain+0x81/0xa0
 [<ffffffff814d50a0>] ? __atomic_notifier_call_chain+0x0/0xa0
 [<ffffffff81322f90>] ? serial8250_console_putchar+0x0/0x40
 [<ffffffff814d5151>] ? atomic_notifier_call_chain+0x11/0x20
 [<ffffffff814d518e>] ? notify_die+0x2e/0x30
 [<ffffffff814d1d3d>] ? do_nmi+0x7d/0x290
 [<ffffffff814d18f0>] ? nmi+0x20/0x39
 [<ffffffff81322f90>] ? serial8250_console_putchar+0x0/0x40
 [<ffffffff81322863>] ? io_serial_in+0x13/0x20
 <<EOE>> 
...................................................................................
root (hd0,0)
 Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz-2.6.38-rc4-357858.2010AroraKernelBeta.fc14.x86_64 ro root=
LABEL=/ rhgb quiet crashkernel=128M rd_NO_PLYMOUTH console=tty0 console=ttyS0,9
600 LANG=en_US.UTF-8 loglevel=8
   [Linux-bzImage, setup=0x3800, size=0x3ebb90]
initrd /boot/initramfs-2.6.38-rc4-357858.2010AroraKernelBeta.fc14.x86_64.img
   [Linux-initrd @ 0x36d47000, 0x12a8eb7 bytes]

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.38-rc4-357858.2010AroraKernelBeta.fc14.x86_64 (arastra@local288.aristanetworks.com) (gcc version 4.5.1 20100924 (Red Hat 4.5.1-4) (GCC) ) #1 SMP Mon Feb 14 09:30:51 PST 2011
Command line: ro root=LABEL=/ rhgb quiet crashkernel=128M rd_NO_PLYMOUTH console=tty0 console=ttyS0,9600 LANG=en_US.UTF-8 loglevel=8
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
 BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000cfef0000 (usable)
 BIOS-e820: 00000000cfef0000 - 00000000cff04000 (ACPI data)
 BIOS-e820: 00000000cff04000 - 00000000cff05000 (ACPI NVS)
 BIOS-e820: 00000000cff05000 - 00000000d0000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 00000002b0000000 (usable)
NX (Execute Disable) protection: active
DMI present.
DMI: X7DWU/X7DWU, BIOS  1.2 11/04/2008
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x2b0000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-E3FFF uncachable
  E4000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 00D0000000 mask 3FF0000000 uncachable
  1 base 00E0000000 mask 3FE0000000 uncachable
  2 base 0000000000 mask 3E00000000 write-back
  3 base 0200000000 mask 3F80000000 write-back
  4 base 0280000000 mask 3FE0000000 write-back
  5 base 02A0000000 mask 3FF0000000 write-back
  6 base 00CFF80000 mask 3FFFF80000 uncachable
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000cff80000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcfef0 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000f68b0] f68b0
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000cfef0000
 0000000000 - 00cfef0000 page 4k
kernel direct mapping tables up to cfef0000 @ 1f97b000-20000000
init_memory_mapping: 0000000100000000-00000002b0000000
 0100000000 - 02b0000000 page 4k
kernel direct mapping tables up to 2b0000000 @ ce964000-cfef0000
RAMDISK: 36d47000 - 37ff0000
Reserving 128MB of memory at 736MB for crashkernel (System RAM: 11008MB)
ACPI: RSDP 00000000000f6880 00024 (v02 PTLTD )
ACPI: XSDT 00000000cfefcef6 000D4 (v01 PTLTD  ? XSDT   06040000  LTP 00000000)
ACPI: FACP 00000000cff033a8 000F4 (v03 INTEL  STOAKLEY 06040000 PTL  00000003)
ACPI: DSDT 00000000cfefeab8 0487C (v01  Intel SEABURG  06040000 MSFT 03000001)
ACPI: FACS 00000000cff04fc0 00040
ACPI: _MAR 00000000cff0349c 00030 (v01 Intel  OEMDMAR  06040000 LOHR 00000001)
ACPI: TCPA 00000000cff034cc 00032 (v01 Intel  STOAKLEY 06040000 LOHR 0000005A)
ACPI: APIC 00000000cff034fe 000C8 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
ACPI: MCFG 00000000cff035c6 0003C (v01 PTLTD    MCFG   06040000  LTP 00000000)
ACPI: HPET 00000000cff03602 00038 (v01 PTLTD  HPETTBL  06040000  LTP 00000001)
ACPI: BOOT 00000000cff0363a 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
ACPI: SPCR 00000000cff03662 00050 (v01 PTLTD  $UCRTBL$ 06040000 PTL  00000001)
ACPI: ERST 00000000cff036b2 00590 (v01 SMCI   ERSTTBL  06040000 SMCI 00000001)
ACPI: HEST 00000000cff03c42 000A8 (v01 SMCI   HESTTBL  06040000 SMCI 00000001)
ACPI: BERT 00000000cff03cea 00030 (v01 SMCI   BERTTBL  06040000 SMCI 00000001)
ACPI: EINJ 00000000cff03d1a 00170 (v01 SMCI   EINJTBL  06040000 SMCI 00000001)
ACPI: SLIC 00000000cff03e8a 00176 (v01 OEM_ID OEMTABLE 06040000  LTP 00000000)
ACPI: SSDT 00000000cfefe859 0025F (v01  PmRef  Cpu0Tst 00003000 INTL 20050228)
ACPI: SSDT 00000000cfefe7b3 000A6 (v01  PmRef  Cpu7Tst 00003000 INTL 20050228)
ACPI: SSDT 00000000cfefe70d 000A6 (v01  PmRef  Cpu6Tst 00003000 INTL 20050228)
ACPI: SSDT 00000000cfefe667 000A6 (v01  PmRef  Cpu5Tst 00003000 INTL 20050228)
ACPI: SSDT 00000000cfefe5c1 000A6 (v01  PmRef  Cpu4Tst 00003000 INTL 20050228)
ACPI: SSDT 00000000cfefe51b 000A6 (v01  PmRef  Cpu3Tst 00003000 INTL 20050228)
ACPI: SSDT 00000000cfefe475 000A6 (v01  PmRef  Cpu2Tst 00003000 INTL 20050228)
ACPI: SSDT 00000000cfefe3cf 000A6 (v01  PmRef  Cpu1Tst 00003000 INTL 20050228)
ACPI: SSDT 00000000cfefcfca 01405 (v01  PmRef    CpuPm 00003000 INTL 20050228)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-00000002b0000000
Initmem setup node 0 0000000000000000-00000002b0000000
  NODE_DATA [00000002affec000 - 00000002afffffff]
 [ffffea0000000000-ffffea000abfffff] PMD -> [ffff8802a5e00000-ffff8802afdfffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x002b0000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000010 -> 0x0000009d
    0: 0x00000100 -> 0x000cfef0
    0: 0x00100000 -> 0x002b0000
On node 0 totalpages: 2621053
  DMA zone: 64 pages used for memmap
  DMA zone: 6 pages reserved
  DMA zone: 3911 pages, LIFO batch:0
  DMA32 zone: 16320 pages used for memmap
  DMA32 zone: 831280 pages, LIFO batch:31
  Normal zone: 27648 pages used for memmap
  Normal zone: 1741824 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec89000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec89000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000cfef0000 - 00000000cff04000
PM: Registered nosave memory: 00000000cff04000 - 00000000cff05000
PM: Registered nosave memory: 00000000cff05000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff8800cfc00000 s77056 r8192 d21248 u262144
pcpu-alloc: s77056 r8192 d21248 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2577015
Policy zone: Normal
Kernel command line: ro root=LABEL=/ rhgb quiet crashkernel=128M rd_NO_PLYMOUTH console=tty0 console=ttyS0,9600 LANG=en_US.UTF-8 loglevel=8
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 10058856k/11272192k available (4972k kernel code, 787980k absent, 425356k reserved, 5824k data, 1308k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
	RCU-based detection of stalled CPUs is disabled.
NR_IRQS:4352 nr_irqs:1152 16
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES:  8
... MAX_LOCK_DEPTH:          48
... MAX_LOCKDEP_KEYS:        8191
... CLASSHASH_SIZE:          4096
... MAX_LOCKDEP_ENTRIES:     16384
... MAX_LOCKDEP_CHAINS:      32768
... CHAINHASH_SIZE:          16384
 memory used by lock dependency info: 5855 kB
 per task-struct memory footprint: 1920 bytes
allocated 104857600 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2500.222 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5000.44 BogoMIPS (lpj=10000888)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20110112
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU           E5420  @ 2.50GHz stepping 06
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
kmemcheck: Limiting number of CPUs to 1.
kmemcheck: Initialized
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 1 CPUs
Total of 1 processors activated (5000.44 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-09] at [mem 0xe0000000-0xe09fffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe09fffff] reserved in E820
PCI: Using configuration type 1 for base access
------------[ cut here ]------------
------------[ cut here ]------------
WARNING: at arch/x86/mm/kmemcheck/kmemcheck.c:634 kmemcheck_fault+0xb9/0xd0()
Hardware name: X7DWU
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.38-rc4-357858.2010AroraKernelBeta.fc14.x86_64 #1
Call Trace:
 <NMI>  [<ffffffff8104eeaa>] ? warn_slowpath_common+0x7a/0xb0
 [<ffffffff8104eef5>] ? warn_slowpath_null+0x15/0x20
 [<ffffffff81037d39>] ? kmemcheck_fault+0xb9/0xd0
 [<ffffffff814d4eed>] ? do_page_fault+0x41d/0x560
 [<ffffffff814d0528>] ? trace_hardirqs_off_thunk+0x3a/0x3c
 [<ffffffff814d15a5>] ? page_fault+0x25/0x30
 [<ffffffff81318f57>] ? vt_console_print+0xa7/0x390
 [<ffffffff81318f1c>] ? vt_console_print+0x6c/0x390
 [<ffffffff8104f025>] ? __call_console_drivers+0x75/0x90
 [<ffffffff8104f085>] ? _call_console_drivers+0x45/0x70
 [<ffffffff8104f59e>] ? console_unlock+0x11e/0x250
 [<ffffffff8104f9ee>] ? vprintk+0x1fe/0x4c0
 [<ffffffff81037d39>] ? kmemcheck_fault+0xb9/0xd0
 [<ffffffff814cd50c>] ? printk+0x3c/0x40
 [<ffffffff81037d39>] ? kmemcheck_fault+0xb9/0xd0
 [<ffffffff8104ee68>] ? warn_slowpath_common+0x38/0xb0
 [<ffffffff8104eef5>] ? warn_slowpath_null+0x15/0x20
 [<ffffffff81037d39>] ? kmemcheck_fault+0xb9/0xd0
 [<ffffffff814d4eed>] ? do_page_fault+0x41d/0x560
 [<ffffffff814d0528>] ? trace_hardirqs_off_thunk+0x3a/0x3c
 [<ffffffff814d15a5>] ? page_fault+0x25/0x30
 [<ffffffff81011bf8>] ? x86_perf_event_update+0x28/0xc0
 [<ffffffff81015ffc>] ? intel_pmu_handle_irq+0x1fc/0x4b0
 [<ffffffff814d2b78>] ? perf_event_nmi_handler+0x58/0xe0
 [<ffffffff814d507d>] ? notifier_call_chain+0x4d/0x70
 [<ffffffff814d5107>] ? __atomic_notifier_call_chain+0x67/0xa0
 [<ffffffff814d50a0>] ? __atomic_notifier_call_chain+0x0/0xa0
 [<ffffffff814d5151>] ? atomic_notifier_call_chain+0x11/0x20
 [<ffffffff814d518e>] ? notify_die+0x2e/0x30
 [<ffffffff814d1d92>] ? do_nmi+0xd2/0x290
 [<ffffffff814d18f0>] ? nmi+0x20/0x39
 [<ffffffff810372ee>] ? kmemcheck_show_addr+0x4e/0x70
 <<EOE>>  [<ffffffff810377c9>] ? kmemcheck_show_all+0x39/0x60
 [<ffffffff810378bc>] ? kmemcheck_show+0x3c/0xa0
 [<ffffffff81037d0a>] ? kmemcheck_fault+0x8a/0xd0
 [<ffffffff814d4eed>] ? do_page_fault+0x41d/0x560
 [<ffffffff810378bc>] ? kmemcheck_show+0x3c/0xa0
 [<ffffffff814d0528>] ? trace_hardirqs_off_thunk+0x3a/0x3c
 [<ffffffff814d0528>] ? trace_hardirqs_off_thunk+0x3a/0x3c
 [<ffffffff814d0528>] ? trace_hardirqs_off_thunk+0x3a/0x3c
 [<ffffffff814d15a5>] ? page_fault+0x25/0x30
 [<ffffffff811004fb>] ? kstrdup+0x4b/0x70
 [<ffffffff811a739c>] ? sysfs_new_dirent+0x10c/0x120
 [<ffffffff811a8123>] ? sysfs_do_create_link+0x93/0x230
 [<ffffffff814d1850>] ? error_exit+0x30/0xb0
 [<ffffffff811a82ce>] ? sysfs_create_link+0xe/0x10
 [<ffffffff81338f0b>] ? device_add+0x37b/0x650
 [<ffffffff813391f9>] ? device_register+0x19/0x20
 [<ffffffff813392fb>] ? device_create_vargs+0xfb/0x130
 [<ffffffff81abdc97>] ? default_bdi_init+0x0/0xaf
 [<ffffffff8110308f>] ? bdi_register+0x6f/0x1c0
 [<ffffffff8127c183>] ? prop_local_init_percpu+0x43/0x50
 [<ffffffff81abdc97>] ? default_bdi_init+0x0/0xaf
 [<ffffffff81abdd36>] ? default_bdi_init+0x9f/0xaf
 [<ffffffff810002ff>] ? do_one_initcall+0x3f/0x180
 [<ffffffff81aa0dc6>] ? kernel_init+0x17c/0x205
 [<ffffffff81003c24>] ? kernel_thread_helper+0x4/0x10
 [<ffffffff814d1394>] ? restore_args+0x0/0x30
 [<ffffffff81aa0c4a>] ? kernel_init+0x0/0x205
 [<ffffffff81003c20>] ? kernel_thread_helper+0x0/0x10
---[ end trace a7919e7f17c0a725 ]---
WARNING: at arch/x86/mm/kmemcheck/kmemcheck.c:634 kmemcheck_fault+0xb9/0xd0()
Hardware name: X7DWU
Modules linked in:
Pid: 1, comm: swapper Tainted: G        W   2.6.38-rc4-357858.2010AroraKernelBeta.fc14.x86_64 #1
Call Trace:
 <NMI>  [<ffffffff8104eeaa>] ? warn_slowpath_common+0x7a/0xb0
 [<ffffffff8104eef5>] ? warn_slowpath_null+0x15/0x20
 [<ffffffff81037d39>] ? kmemcheck_fault+0xb9/0xd0
 [<ffffffff814d4eed>] ? do_page_fault+0x41d/0x560
 [<ffffffff814d0528>] ? trace_hardirqs_off_thunk+0x3a/0x3c
 [<ffffffff814d15a5>] ? page_fault+0x25/0x30
 [<ffffffff81011bf8>] ? x86_perf_event_update+0x28/0xc0
 [<ffffffff81015ffc>] ? intel_pmu_handle_irq+0x1fc/0x4b0
 [<ffffffff814d2b78>] ? perf_event_nmi_handler+0x58/0xe0
 [<ffffffff814d507d>] ? notifier_call_chain+0x4d/0x70
 [<ffffffff814d5107>] ? __atomic_notifier_call_chain+0x67/0xa0
 [<ffffffff814d50a0>] ? __atomic_notifier_call_chain+0x0/0xa0
 [<ffffffff814d5151>] ? atomic_notifier_call_chain+0x11/0x20
 [<ffffffff814d518e>] ? notify_die+0x2e/0x30
 [<ffffffff814d1d92>] ? do_nmi+0xd2/0x290
 [<ffffffff814d18f0>] ? nmi+0x20/0x39
 [<ffffffff810372ee>] ? kmemcheck_show_addr+0x4e/0x70
 <<EOE>>  [<ffffffff810377c9>] ? kmemcheck_show_all+0x39/0x60
 [<ffffffff810378bc>] ? kmemcheck_show+0x3c/0xa0
 [<ffffffff81037d0a>] ? kmemcheck_fault+0x8a/0xd0
 [<ffffffff814d4eed>] ? do_page_fault+0x41d/0x560
 [<ffffffff810378bc>] ? kmemcheck_show+0x3c/0xa0
 [<ffffffff814d0528>] ? trace_hardirqs_off_thunk+0x3a/0x3c
 [<ffffffff814d0528>] ? trace_hardirqs_off_thunk+0x3a/0x3c
 [<ffffffff814d0528>] ? trace_hardirqs_off_thunk+0x3a/0x3c
 [<ffffffff814d15a5>] ? page_fault+0x25/0x30
 [<ffffffff811004fb>] ? kstrdup+0x4b/0x70
 [<ffffffff811a739c>] ? sysfs_new_dirent+0x10c/0x120
 [<ffffffff811a8123>] ? sysfs_do_create_link+0x93/0x230
 [<ffffffff814d1850>] ? error_exit+0x30/0xb0
 [<ffffffff811a82ce>] ? sysfs_create_link+0xe/0x10
 [<ffffffff81338f0b>] ? device_add+0x37b/0x650
 [<ffffffff813391f9>] ? device_register+0x19/0x20
 [<ffffffff813392fb>] ? device_create_vargs+0xfb/0x130
 [<ffffffff81abdc97>] ? default_bdi_init+0x0/0xaf
 [<ffffffff8110308f>] ? bdi_register+0x6f/0x1c0
 [<ffffffff8127c183>] ? prop_local_init_percpu+0x43/0x50
 [<ffffffff81abdc97>] ? default_bdi_init+0x0/0xaf
 [<ffffffff81abdd36>] ? default_bdi_init+0x9f/0xaf
 [<ffffffff810002ff>] ? do_one_initcall+0x3f/0x180
 [<ffffffff81aa0dc6>] ? kernel_init+0x17c/0x205
 [<ffffffff81003c24>] ? kernel_thread_helper+0x4/0x10
 [<ffffffff814d1394>] ? restore_args+0x0/0x30
 [<ffffffff81aa0c4a>] ? kernel_init+0x0/0x205
 [<ffffffff81003c20>] ? kernel_thread_helper+0x0/0x10
---[ end trace a7919e7f17c0a726 ]---
------------[ cut here ]------------
WARNING: at kernel/lockdep.c:2465 lockdep_trace_alloc+0xcc/0xe0()
Hardware name: X7DWU
Modules linked in:
Pid: 1, comm: swapper Tainted: G        W   2.6.38-rc4-357858.2010AroraKernelBeta.fc14.x86_64 #1
Call Trace:
 [<ffffffff8104eeaa>] ? warn_slowpath_common+0x7a/0xb0
 [<ffffffff811a72cc>] ? sysfs_new_dirent+0x3c/0x120
 [<ffffffff8104eef5>] ? warn_slowpath_null+0x15/0x20
 [<ffffffff810883dc>] ? lockdep_trace_alloc+0xcc/0xe0
 [<ffffffff8112e5f8>] ? kmem_cache_alloc+0x28/0x160
 [<ffffffff811a72cc>] ? sysfs_new_dirent+0x3c/0x120
 [<ffffffff811a8123>] ? sysfs_do_create_link+0x93/0x230
 [<ffffffff814d1850>] ? error_exit+0x30/0xb0
 [<ffffffff811a82ce>] ? sysfs_create_link+0xe/0x10
 [<ffffffff81338f0b>] ? device_add+0x37b/0x650
 [<ffffffff813391f9>] ? device_register+0x19/0x20
 [<ffffffff813392fb>] ? device_create_vargs+0xfb/0x130
 [<ffffffff81abdc97>] ? default_bdi_init+0x0/0xaf
 [<ffffffff8110308f>] ? bdi_register+0x6f/0x1c0
 [<ffffffff8127c183>] ? prop_local_init_percpu+0x43/0x50
 [<ffffffff81abdc97>] ? default_bdi_init+0x0/0xaf
 [<ffffffff81abdd36>] ? default_bdi_init+0x9f/0xaf
 [<ffffffff810002ff>] ? do_one_initcall+0x3f/0x180
 [<ffffffff81aa0dc6>] ? kernel_init+0x17c/0x205
 [<ffffffff81003c24>] ? kernel_thread_helper+0x4/0x10
 [<ffffffff814d1394>] ? restore_args+0x0/0x30
 [<ffffffff81aa0c4a>] ? kernel_init+0x0/0x205
 [<ffffffff81003c20>] ? kernel_thread_helper+0x0/0x10
---[ end trace a7919e7f17c0a727 ]---
ERROR: kmemcheck: Fatal error

Pid: 1, comm: swapper Tainted: G        W   2.6.38-rc4-357858.2010AroraKernelBeta.fc14.x86_64 #1 X7DWU/X7DWU
RIP: 0010:[<ffffffff811004fb>]  [<ffffffff811004fb>] kstrdup+0x4b/0x70
RSP: 0018:ffff880299ccbc10  EFLAGS: 00010102
RAX: ffff8802a584f688 RBX: 0000000000000008 RCX: 0000000000000001
RDX: 0000000000000000 RSI: ffff8802a584f66c RDI: ffff8802a584f68c
RBP: ffff880299ccbc30 R08: 0000000000000000 R09: ffff8802a5850688
R10: ffff880000000000 R11: 0000000000000001 R12: ffff8802a584f668
R13: 00000000000000d0 R14: ffff8802a584f668 R15: 000000000000a1ff
FS:  0000000000000000(0000) GS:ffff8800cfc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffff880299c98810 CR3: 0000000001a03000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff4ff0 DR7: 0000000000000400
 [<ffffffff810370c4>] kmemcheck_error_save_bug+0x74/0xb0
 [<ffffffff8103790b>] kmemcheck_show+0x8b/0xa0
 [<ffffffff81037d0a>] kmemcheck_fault+0x8a/0xd0
 [<ffffffff814d4eed>] do_page_fault+0x41d/0x560
 [<ffffffff814d15a5>] page_fault+0x25/0x30
 [<ffffffff811a739c>] sysfs_new_dirent+0x10c/0x120
 [<ffffffff811a8123>] sysfs_do_create_link+0x93/0x230
 [<ffffffff811a82ce>] sysfs_create_link+0xe/0x10
 [<ffffffff81338f0b>] device_add+0x37b/0x650
 [<ffffffff813391f9>] device_register+0x19/0x20
 [<ffffffff813392fb>] device_create_vargs+0xfb/0x130
 [<ffffffff8110308f>] bdi_register+0x6f/0x1c0
 [<ffffffff81abdd36>] default_bdi_init+0x9f/0xaf
 [<ffffffff810002ff>] do_one_initcall+0x3f/0x180
 [<ffffffff81aa0dc6>] kernel_init+0x17c/0x205
 [<ffffffff81003c24>] kernel_thread_helper+0x4/0x10
 [<ffffffffffffffff>] 0xffffffffffffffff
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
\_SB_:_OSC evaluation returned wrong type
_OSC request data:1 7 
ERROR: kmemcheck: Fatal error

Pid: 1, comm: swapper Tainted: G        W   2.6.38-rc4-357858.2010AroraKernelBeta.fc14.x86_64 #1 X7DWU/X7DWU
RIP: 0010:[<ffffffff8107664f>]  [<ffffffff8107664f>] down_timeout+0x2f/0x60
RSP: 0018:ffff880299ccbbd0  EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffff880299c6e0c0 RCX: 0000000000000000
RDX: 000000000000f101 RSI: 0000000000000000 RDI: ffff880299c6e0c0
RBP: ffff880299ccbbf0 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000286
R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff8800cfc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffff880299c98810 CR3: 0000000001a03000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff4ff0 DR7: 0000000000000400
 [<ffffffff810370c4>] kmemcheck_error_save_bug+0x74/0xb0
 [<ffffffff8103790b>] kmemcheck_show+0x8b/0xa0
 [<ffffffff81037d0a>] kmemcheck_fault+0x8a/0xd0
 [<ffffffff814d4eed>] do_page_fault+0x41d/0x560
 [<ffffffff814d15a5>] page_fault+0x25/0x30
 [<ffffffff812c7523>] acpi_os_wait_semaphore+0x96/0x13c
 [<ffffffff812f2f3b>] acpi_ut_acquire_mutex+0x84/0x101
 [<ffffffff812e8b2b>] acpi_ns_walk_namespace+0xea/0x17b
 [<ffffffff812e5c96>] acpi_walk_namespace+0x8e/0xc8
 [<ffffffff812e83cc>] acpi_ns_initialize_objects+0x93/0x185
 [<ffffffff812f0fbb>] acpi_initialize_objects+0x85/0xd3
 [<ffffffff81acbf3c>] acpi_bus_init+0x9f/0x1dd
 [<ffffffff81acc0eb>] acpi_init+0x71/0xd8
 [<ffffffff810002ff>] do_one_initcall+0x3f/0x180
 [<ffffffff81aa0dc6>] kernel_init+0x17c/0x205
 [<ffffffff81003c24>] kernel_thread_helper+0x4/0x10
 [<ffffffffffffffff>] 0xffffffffffffffff
BUG: unable to handle kernel NULL pointer dereference at 0000000000000064
IP: [<ffffffff810df97e>] perf_event_update_userpage+0x3e/0xe0
PGD 0 
Oops: 0000 [#1] SMP 
last sysfs file: 
CPU 0 
Modules linked in:

Pid: 1, comm: swapper Tainted: G        W   2.6.38-rc4-357858.2010AroraKernelBeta.fc14.x86_64 #1 X7DWU/X7DWU
RIP: 0010:[<ffffffff810df97e>]  [<ffffffff810df97e>] perf_event_update_userpage+0x3e/0xe0
RSP: 0018:ffff8800cfc07cc8  EFLAGS: 00010206
RAX: 000000000000000c RBX: ffff880299cbc4c8 RCX: 0000000000000007
RDX: 0000000000000000 RSI: 0000000000000156 RDI: 0000000000001000
RBP: ffff880299ccb8d0 R08: 0000000000000080 R09: ffffffff817a4b41
R10: ffff880000000001 R11: 0000000000000000 R12: 0000000000000008
R13: ffff880299e21208 R14: 0000000000000013 R15: 0000000000000001
FS:  0000000000000000(0000) GS:ffff8800cfc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffff8802a58182e4 CR3: 0000000001a03000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff4ff0 DR7: 0000000000000400
BUG: unable to handle kernel paging request at 0000000181037f51
IP: [<0000000181037f51>] 0x181037f51
PGD 0 
Oops: 0010 [#2] SMP 
last sysfs file: 
CPU 0 
Modules linked in:

Pid: 1, comm: swapper Tainted: G        W   2.6.38-rc4-357858.2010AroraKernelBeta.fc14.x86_64 #1 X7DWU/X7DWU
RIP: 0010:[<0000000181037f51>]  [<0000000181037f51>] 0x181037f51
RSP: 0018:ffff8800cfc079b8  EFLAGS: 00010092
RAX: 0000000000000048 RBX: ffff8800cfc07c18 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000046
RBP: ffff8800cfc079c8 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000001 R11: 0000000000000000 R12: ffff8800cfc07cc8
R13: ffff8800cfc07c18 R14: ffff8800cfc079b8 R15: ffffffff81037f51
FS:  0000000000000000(0000) GS:ffff8800cfc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffff8802a58182e4 CR3: 0000000001a03000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff4ff0 DR7: 0000000000000400
Process swapper (pid: 1, threadinfo ffff880299cca000, task ffff880299cd0000)
Stack:
 ffff8800cfc079d8 ffffffff81038055 ffff880299c98000 ffff880299c98ae8
 ffff8800cfc07a08 ffffffff81037177 ffff880299c98000 ffff8800cfc07c18
 ffff880299c98aef ffffffff810df972 ffff8800cfc07a38 ffffffff81037225
Call Trace:
 <NMI> 
 [<ffffffff81038055>] ? kmemcheck_shadow_lookup+0x45/0x70
 [<ffffffff81037177>] ? kmemcheck_read_strict+0x47/0xb0
 [<ffffffff810df972>] ? perf_event_update_userpage+0x32/0xe0
 [<ffffffff81037225>] ? kmemcheck_read+0x45/0x70
 [<ffffffff81037f51>] ? kmemcheck_pte_lookup+0x11/0x50
 [<ffffffff810372e6>] ? kmemcheck_show_addr+0x46/0x70
 [<ffffffff810377c9>] ? kmemcheck_show_all+0x39/0x60
 [<ffffffff810378bc>] ? kmemcheck_show+0x3c/0xa0
 [<ffffffff81037d0a>] ? kmemcheck_fault+0x8a/0xd0
 [<ffffffff814d4eed>] ? do_page_fault+0x41d/0x560
 [<ffffffff814d4eed>] ? do_page_fault+0x41d/0x560
 [<ffffffff814d0528>] ? trace_hardirqs_off_thunk+0x3a/0x3c
 [<ffffffff814d0528>] ? trace_hardirqs_off_thunk+0x3a/0x3c
 [<ffffffff814d1850>] ? error_exit+0x30/0xb0
 [<ffffffff810df9ed>] ? perf_event_update_userpage+0xad/0xe0
 [<ffffffff810df940>] ? perf_event_update_userpage+0x0/0xe0
 [<ffffffff81014849>] ? intel_pmu_enable_all+0xa9/0x110
 [<ffffffff8101606e>] ? intel_pmu_handle_irq+0x26e/0x4b0
 [<ffffffff814d2b78>] ? perf_event_nmi_handler+0x58/0xe0
 [<ffffffff814d507d>] ? notifier_call_chain+0x4d/0x70
 [<ffffffff814d5121>] ? __atomic_notifier_call_chain+0x81/0xa0
 [<ffffffff814d50a0>] ? __atomic_notifier_call_chain+0x0/0xa0
 [<ffffffff81322f90>] ? serial8250_console_putchar+0x0/0x40
 [<ffffffff814d5151>] ? atomic_notifier_call_chain+0x11/0x20
 [<ffffffff814d518e>] ? notify_die+0x2e/0x30
 [<ffffffff814d1d3d>] ? do_nmi+0x7d/0x290
 [<ffffffff814d18f0>] ? nmi+0x20/0x39
 [<ffffffff81322f90>] ? serial8250_console_putchar+0x0/0x40
 [<ffffffff81322863>] ? io_serial_in+0x13/0x20
 <<EOE>> 
Code:  Bad RIP value.
RIP  [<0000000181037f51>] 0x181037f51
 RSP <ffffffff81037f51>
CR2: 0000000181037f51
---[ end trace a7919e7f17c0a728 ]---
swapper used greatest stack depth: 3344 bytes left
Kernel panic - not syncing: Attempted to kill init!
Pid: 1, comm: swapper Tainted: G      D W   2.6.38-rc4-357858.2010AroraKernelBeta.fc14.x86_64 #1
Call Trace:
 <NMI>  [<ffffffff814cd3b6>] ? panic+0x79/0x193
 [<ffffffff810533eb>] ? do_exit+0x7fb/0x8d0
 [<ffffffff814d23d5>] ? oops_end+0xa5/0xf0
 [<ffffffff81030c70>] ? no_context+0xf0/0x260
 [<ffffffff81030f05>] ? __bad_area_nosemaphore+0x125/0x1e0
 [<ffffffff81030fce>] ? bad_area_nosemaphore+0xe/0x10
 [<ffffffff814d4f52>] ? do_page_fault+0x482/0x560
 [<ffffffff814d0528>] ? trace_hardirqs_off_thunk+0x3a/0x3c
 [<ffffffff81037f51>] ? kmemcheck_pte_lookup+0x11/0x50
 [<ffffffff814d15a5>] ? page_fault+0x25/0x30
 [<ffffffff81037f51>] ? kmemcheck_pte_lookup+0x11/0x50
 [<ffffffff81037f51>] ? kmemcheck_pte_lookup+0x11/0x50
 [<ffffffff81038055>] ? kmemcheck_shadow_lookup+0x45/0x70
 [<ffffffff81037177>] ? kmemcheck_read_strict+0x47/0xb0
 [<ffffffff810df972>] ? perf_event_update_userpage+0x32/0xe0
 [<ffffffff81037225>] ? kmemcheck_read+0x45/0x70
 [<ffffffff81037f51>] ? kmemcheck_pte_lookup+0x11/0x50
 [<ffffffff810372e6>] ? kmemcheck_show_addr+0x46/0x70
 [<ffffffff810377c9>] ? kmemcheck_show_all+0x39/0x60
 [<ffffffff810378bc>] ? kmemcheck_show+0x3c/0xa0
 [<ffffffff81037d0a>] ? kmemcheck_fault+0x8a/0xd0
 [<ffffffff814d4eed>] ? do_page_fault+0x41d/0x560
 [<ffffffff814d4eed>] ? do_page_fault+0x41d/0x560
 [<ffffffff814d0528>] ? trace_hardirqs_off_thunk+0x3a/0x3c
 [<ffffffff814d0528>] ? trace_hardirqs_off_thunk+0x3a/0x3c
 [<ffffffff814d1850>] ? error_exit+0x30/0xb0
 [<ffffffff810df9ed>] ? perf_event_update_userpage+0xad/0xe0
 [<ffffffff810df940>] ? perf_event_update_userpage+0x0/0xe0
 [<ffffffff81014849>] ? intel_pmu_enable_all+0xa9/0x110
 [<ffffffff8101606e>] ? intel_pmu_handle_irq+0x26e/0x4b0
 [<ffffffff814d2b78>] ? perf_event_nmi_handler+0x58/0xe0
 [<ffffffff814d507d>] ? notifier_call_chain+0x4d/0x70
 [<ffffffff814d5121>] ? __atomic_notifier_call_chain+0x81/0xa0
 [<ffffffff814d50a0>] ? __atomic_notifier_call_chain+0x0/0xa0
 [<ffffffff81322f90>] ? serial8250_console_putchar+0x0/0x40
 [<ffffffff814d5151>] ? atomic_notifier_call_chain+0x11/0x20
 [<ffffffff814d518e>] ? notify_die+0x2e/0x30
 [<ffffffff814d1d3d>] ? do_nmi+0x7d/0x290
 [<ffffffff814d18f0>] ? nmi+0x20/0x39
 [<ffffffff81322f90>] ? serial8250_console_putchar+0x0/0x40
 [<ffffffff81322863>] ? io_serial_in+0x13/0x20
 <<EOE>> 

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Heads up Linux 2.6.38-rc4 compile problems.
  2011-02-14 19:44                             ` Eric W. Biederman
@ 2011-02-14 20:13                               ` Andrew Morton
  0 siblings, 0 replies; 62+ messages in thread
From: Andrew Morton @ 2011-02-14 20:13 UTC (permalink / raw)
  To: Eric W. Biederman
  Cc: Linus Torvalds, Alex Riesen, David Miller, Linux Kernel Mailing List

On Mon, 14 Feb 2011 11:44:47 -0800
ebiederm@xmission.com (Eric W. Biederman) wrote:

> My three boot attempts with CONFIG_DEBUG_PAGEALLOC are below.
> 
> 
> ERROR: kmemcheck: Fatal error

It might be that kmemcheck and DEBUG_PAGE_ALLOC don't get along well -
try disabling kmemcheck?

It's worth persisting with DEBUG_PAGE_ALLOC, please - if we can get it
working then it should be able to find a stray write into a freed 8k page
with precision.


^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: [Crash-utility] Heads up Linux 2.6.38-rc4 compile problems.
  2011-02-14 16:58                     ` Mike Snitzer
@ 2011-02-15 14:07                       ` Dave Anderson
  0 siblings, 0 replies; 62+ messages in thread
From: Dave Anderson @ 2011-02-15 14:07 UTC (permalink / raw)
  To: Discussion list for crash utility usage,
	maintenance and development, ebiederm
  Cc: Linux Kernel Mailing List, Alex Riesen, Andrew Morton,
	Linus Torvalds, David Miller



----- Original Message -----
> Hey Eric,
> 
> On Mon, Feb 14, 2011 at 12:34 AM, Eric W. Biederman
> <ebiederm@xmission.com> wrote:
> >
> > And for completeness. When I was rebooting v2.6.38-rc4 to start running
> > 795abaf1e4e188c4171e3cd3dbb11a9fcacaf505 I hit this.
> >
> > Sigh. I wish crash worked on something besides redhats enterprise
> > kernels. Then I could use the system core file I have to do more than
> > extract the dmesg.

I update the upstream version of crash typically once a month.

Perhaps you are using an older version?  I just built a 2.6.38-rc4 
kernel, and the latest version of crash (5.1.2) works OK with it:

  [root@hp-z400-02 ~]# crash
  
  crash 5.1.2
  Copyright (C) 2002-2011  Red Hat, Inc.
  Copyright (C) 2004, 2005, 2006  IBM Corporation
  Copyright (C) 1999-2006  Hewlett-Packard Co
  Copyright (C) 2005, 2006  Fujitsu Limited
  Copyright (C) 2006, 2007  VA Linux Systems Japan K.K.
  Copyright (C) 2005  NEC Corporation
  Copyright (C) 1999, 2002, 2007  Silicon Graphics, Inc.
  Copyright (C) 1999, 2000, 2001, 2002  Mission Critical Linux, Inc.
  This program is free software, covered by the GNU General Public License,
  and you are welcome to change it and/or distribute copies of it under
  certain conditions.  Enter "help copying" to see the conditions.
  This program has absolutely no warranty.  Enter "help warranty" for details.
   
  GNU gdb (GDB) 7.0
  Copyright (C) 2009 Free Software Foundation, Inc.
  License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
  This is free software: you are free to change and redistribute it.
  There is NO WARRANTY, to the extent permitted by law.  Type "show copying"
  and "show warranty" for details.
  This GDB was configured as "x86_64-unknown-linux-gnu"...
  
        KERNEL: /vmlinux
      DUMPFILE: /dev/mem
          CPUS: 6
          DATE: Tue Feb 15 08:57:17 2011
        UPTIME: 00:00:54
  LOAD AVERAGE: 0.37, 0.10, 0.04
         TASKS: 132
      NODENAME: hp-z400-02.lab.bos.redhat.com
       RELEASE: 2.6.38-rc4
       VERSION: #1 SMP Mon Feb 14 17:41:17 EST 2011
       MACHINE: x86_64  (3067 Mhz)
        MEMORY: 4 GB
           PID: 1539
       COMMAND: "crash"
          TASK: ffff8801363f9710  [THREAD_INFO: ffff880135f2a000]
           CPU: 0
         STATE: TASK_RUNNING (ACTIVE)
  
  crash>

Dave

> 
> Then you should cc crash-utility@redhat.com (now cc'd) and work with
> Dave Anderson (e.g. get him your vmlinux and core files, which version
> of crash you're using and how it fails). Dave does an amazing job of
> working through crash issues which are reported against upstream
> kernels -- the key first step is the report.
> 
> Mike
> 
> --
> Crash-utility mailing list
> Crash-utility@redhat.com
> https://www.redhat.com/mailman/listinfo/crash-utility

^ permalink raw reply	[flat|nested] 62+ messages in thread

* Re: Linux 2.6.38-rc4 (test_nx: BUG)
  2011-02-09 17:10   ` Arjan van de Ven
@ 2011-02-17 19:33     ` Kees Cook
  0 siblings, 0 replies; 62+ messages in thread
From: Kees Cook @ 2011-02-17 19:33 UTC (permalink / raw)
  To: Arjan van de Ven
  Cc: Randy Dunlap, Linus Torvalds, x86, Linux Kernel Mailing List

Hi Arjan,

On Wed, Feb 09, 2011 at 09:10:48AM -0800, Arjan van de Ven wrote:
> On 2/9/2011 9:08 AM, Randy Dunlap wrote:
> >test_nx BUGs.
> >CONFIG_DEBUG_RODATA=y
> >(nearly allmodconfig, with a few changes)
> >
> >Is that expected?
> >
> this test should pass...
> so something broke it (I'll call that a success for the test ;-)

I would suspect that the code in fudze_exception_table() isn't legal any
more due to the RO patches. (i.e. I think test_nx.c needs to be updated.)

-Kees

-- 
Kees Cook
Ubuntu Security Team

^ permalink raw reply	[flat|nested] 62+ messages in thread

end of thread, other threads:[~2011-02-17 19:34 UTC | newest]

Thread overview: 62+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-02-08  0:23 Linux 2.6.38-rc4 Linus Torvalds
2011-02-08 10:17 ` lockdep: possible reason: unannotated irqs-off. (was: Re: Linux 2.6.38-rc4) Borislav Petkov
2011-02-08 10:41   ` Peter Zijlstra
2011-02-08 12:11     ` Yong Zhang
2011-02-08 12:14       ` [PATCH 2/2] timer: use local_bh_enable_force_wake() in del_timer_sync() Yong Zhang
2011-02-08 13:34       ` lockdep: possible reason: unannotated irqs-off. (was: Re: Linux 2.6.38-rc4) Yong Zhang
2011-02-08 13:48         ` Peter Zijlstra
2011-02-08 14:18           ` Peter Zijlstra
2011-02-08 15:15             ` Ingo Molnar
2011-02-08 15:51             ` [tip:core/urgent] Revert "lockdep, timer: Fix del_timer_sync() annotation" tip-bot for Peter Zijlstra
2011-02-09  1:46             ` lockdep: possible reason: unannotated irqs-off. (was: Re: Linux 2.6.38-rc4) Yong Zhang
2011-02-14 14:51             ` Yong Zhang
2011-02-14 18:53               ` Thomas Gleixner
2011-02-08 20:28 ` Heads up Linux 2.6.38-rc4 compile problems Eric W. Biederman
2011-02-08 20:44   ` Linus Torvalds
2011-02-09  9:01     ` Eric W. Biederman
2011-02-09 14:59       ` Alex Riesen
2011-02-09 16:02         ` Linus Torvalds
2011-02-13 17:39           ` Linus Torvalds
2011-02-14  2:04             ` Eric W. Biederman
2011-02-14  2:45               ` Linus Torvalds
2011-02-14  3:40                 ` Eric W. Biederman
2011-02-14  5:34                   ` Eric W. Biederman
2011-02-14 15:26                     ` Linus Torvalds
2011-02-14 15:37                     ` Eric W. Biederman
2011-02-14 16:37                       ` Linus Torvalds
2011-02-14 17:39                         ` Eric W. Biederman
2011-02-14 17:49                         ` Linus Torvalds
2011-02-14 18:08                           ` Linus Torvalds
2011-02-14 19:44                             ` Eric W. Biederman
2011-02-14 20:13                               ` Andrew Morton
2011-02-14 18:25                         ` Andi Kleen
2011-02-14 16:58                     ` Mike Snitzer
2011-02-15 14:07                       ` [Crash-utility] " Dave Anderson
2011-02-09 17:08 ` Linux 2.6.38-rc4 (test_nx: BUG) Randy Dunlap
2011-02-09 17:10   ` Arjan van de Ven
2011-02-17 19:33     ` Kees Cook
2011-02-09 17:24 ` Linux 2.6.38-rc4 (hysdn: BUG) Randy Dunlap
2011-02-09 19:44   ` Linus Torvalds
2011-02-09 21:25     ` Randy Dunlap
2011-02-09 21:57       ` David Miller
2011-02-09 22:00         ` Linus Torvalds
2011-02-09 17:26 ` Linux 2.6.38-rc4 (tty/ifx6x60: BUG) Randy Dunlap
2011-02-09 18:28   ` Alan Cox
2011-02-09 17:28 ` Linux 2.6.38-rc4 (target_core: rmmod GP fault) Randy Dunlap
2011-02-09 19:00   ` Linus Torvalds
2011-02-09 20:02     ` Nicholas A. Bellinger
2011-02-09 20:13       ` James Bottomley
2011-02-09 20:20         ` Nicholas A. Bellinger
2011-02-09 20:28           ` James Bottomley
2011-02-09 20:44             ` Nicholas A. Bellinger
2011-02-09 17:36 ` Linux 2.6.38-rc4 (other bugs) Randy Dunlap
2011-02-09 22:01   ` David Miller
2011-02-09 22:16     ` Randy Dunlap
2011-02-10  4:58     ` Linux 2.6.38-rc4 (other bugs: x25) Randy Dunlap
2011-02-10  5:48       ` David Miller
2011-02-10  6:29         ` Randy Dunlap
2011-02-10  6:35           ` David Miller
2011-02-10 19:34   ` Linux 2.6.38-rc4 (other bugs: ipmi Oops) Randy Dunlap
2011-02-10 20:03     ` Linus Torvalds
2011-02-10 20:08       ` Corey Minyard
2011-02-10 21:41       ` Randy Dunlap

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).