LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Patrice CHOTARD <patrice.chotard@foss.st.com>
To: Alain Volmat <avolmat@me.com>, Rob Herring <robh+dt@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>,
	<linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v3 01/13] ARM: dts: sti: update flexgen compatible within stih418-clock
Date: Tue, 3 Aug 2021 14:03:36 +0200	[thread overview]
Message-ID: <1d5c9ee4-a025-8520-0ab1-4b7f2f80bcc4@foss.st.com> (raw)
In-Reply-To: <20210331204228.26107-2-avolmat@me.com>

Hi Alain

On 3/31/21 10:42 PM, Alain Volmat wrote:
> With the introduction of new flexgen compatible within the clk-flexgen
> driver, remove the clock-output-names entry from the flexgen nodes
> and set the new proper compatible corresponding.
> 
> Signed-off-by: Alain Volmat <avolmat@me.com>
> ---
>  arch/arm/boot/dts/stih418-clock.dtsi | 96 ++--------------------------
>  1 file changed, 5 insertions(+), 91 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi
> index 8fa092462102..35d12979cdf4 100644
> --- a/arch/arm/boot/dts/stih418-clock.dtsi
> +++ b/arch/arm/boot/dts/stih418-clock.dtsi
> @@ -83,15 +83,12 @@
>  			};
>  
>  			clk_s_a0_flexgen: clk-s-a0-flexgen {
> -				compatible = "st,flexgen";
> +				compatible = "st,flexgen", "st,flexgen-stih410-a0";
>  
>  				#clock-cells = <1>;
>  
>  				clocks = <&clk_s_a0_pll 0>,
>  					 <&clk_sysin>;
> -
> -				clock-output-names = "clk-ic-lmi0",
> -						     "clk-ic-lmi1";
>  			};
>  		};
>  
> @@ -132,7 +129,7 @@
>  
>  			clk_s_c0_flexgen: clk-s-c0-flexgen {
>  				#clock-cells = <1>;
> -				compatible = "st,flexgen";
> +				compatible = "st,flexgen", "st,flexgen-stih418-c0";
>  
>  				clocks = <&clk_s_c0_pll0 0>,
>  					 <&clk_s_c0_pll1 0>,
> @@ -142,49 +139,6 @@
>  					 <&clk_s_c0_quadfs 3>,
>  					 <&clk_sysin>;
>  
> -				clock-output-names = "clk-icn-gpu",
> -						     "clk-fdma",
> -						     "clk-nand",
> -						     "clk-hva",
> -						     "clk-proc-stfe",
> -						     "clk-tp",
> -						     "clk-rx-icn-dmu",
> -						     "clk-rx-icn-hva",
> -						     "clk-icn-cpu",
> -						     "clk-tx-icn-dmu",
> -						     "clk-mmc-0",
> -						     "clk-mmc-1",
> -						     "clk-jpegdec",
> -						     "clk-icn-reg",
> -						     "clk-proc-bdisp-0",
> -						     "clk-proc-bdisp-1",
> -						     "clk-pp-dmu",
> -						     "clk-vid-dmu",
> -						     "clk-dss-lpc",
> -						     "clk-st231-aud-0",
> -						     "clk-st231-gp-1",
> -						     "clk-st231-dmu",
> -						     "clk-icn-lmi",
> -						     "clk-tx-icn-1",
> -						     "clk-icn-sbc",
> -						     "clk-stfe-frc2",
> -						     "clk-eth-phyref",
> -						     "clk-eth-ref-phyclk",
> -						     "clk-flash-promip",
> -						     "clk-main-disp",
> -						     "clk-aux-disp",
> -						     "clk-compo-dvp",
> -						     "clk-tx-icn-hades",
> -						     "clk-rx-icn-hades",
> -						     "clk-icn-reg-16",
> -						     "clk-pp-hevc",
> -						     "clk-clust-hevc",
> -						     "clk-hwpe-hevc",
> -						     "clk-fc-hevc",
> -						     "clk-proc-mixer",
> -						     "clk-proc-sc",
> -						     "clk-avsp-hevc";
> -
>  				/*
>  				 * ARM Peripheral clock for timers
>  				 */
> @@ -221,20 +175,13 @@
>  
>  			clk_s_d0_flexgen: clk-s-d0-flexgen {
>  				#clock-cells = <1>;
> -				compatible = "st,flexgen-audio", "st,flexgen";
> +				compatible = "st,flexgen", "st,flexgen-stih410-d0";
>  
>  				clocks = <&clk_s_d0_quadfs 0>,
>  					 <&clk_s_d0_quadfs 1>,
>  					 <&clk_s_d0_quadfs 2>,
>  					 <&clk_s_d0_quadfs 3>,
>  					 <&clk_sysin>;
> -
> -				clock-output-names = "clk-pcm-0",
> -						     "clk-pcm-1",
> -						     "clk-pcm-2",
> -						     "clk-spdiff",
> -						     "clk-pcmr10-master",
> -						     "clk-usb2-phy";
>  			};
>  		};
>  
> @@ -257,7 +204,7 @@
>  
>  			clk_s_d2_flexgen: clk-s-d2-flexgen {
>  				#clock-cells = <1>;
> -				compatible = "st,flexgen-video", "st,flexgen";
> +				compatible = "st,flexgen", "st,flexgen-stih418-d2";
>  
>  				clocks = <&clk_s_d2_quadfs 0>,
>  					 <&clk_s_d2_quadfs 1>,
> @@ -266,30 +213,6 @@
>  					 <&clk_sysin>,
>  					 <&clk_sysin>,
>  					 <&clk_tmdsout_hdmi>;
> -
> -				clock-output-names = "clk-pix-main-disp",
> -						     "",
> -						     "",
> -						     "",
> -						     "",
> -						     "clk-tmds-hdmi-div2",
> -						     "clk-pix-aux-disp",
> -						     "clk-denc",
> -						     "clk-pix-hddac",
> -						     "clk-hddac",
> -						     "clk-sddac",
> -						     "clk-pix-dvo",
> -						     "clk-dvo",
> -						     "clk-pix-hdmi",
> -						     "clk-tmds-hdmi",
> -						     "clk-ref-hdmiphy",
> -						     "", "", "", "", "",
> -						     "", "", "", "", "",
> -						     "", "", "", "", "",
> -						     "", "", "", "", "",
> -						     "", "", "", "", "",
> -						     "", "", "", "", "",
> -						     "", "clk-vp9";
>  			};
>  		};
>  
> @@ -312,22 +235,13 @@
>  
>  			clk_s_d3_flexgen: clk-s-d3-flexgen {
>  				#clock-cells = <1>;
> -				compatible = "st,flexgen";
> +				compatible = "st,flexgen", "st,flexgen-stih407-d3";
>  
>  				clocks = <&clk_s_d3_quadfs 0>,
>  					 <&clk_s_d3_quadfs 1>,
>  					 <&clk_s_d3_quadfs 2>,
>  					 <&clk_s_d3_quadfs 3>,
>  					 <&clk_sysin>;
> -
> -				clock-output-names = "clk-stfe-frc1",
> -						     "clk-tsout-0",
> -						     "clk-tsout-1",
> -						     "clk-mchi",
> -						     "clk-vsens-compo",
> -						     "clk-frc1-remote",
> -						     "clk-lpc-0",
> -						     "clk-lpc-1";
>  			};
>  		};
>  	};
> 
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

Thanks
Patrice

  reply	other threads:[~2021-08-03 12:04 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-31 20:42 [PATCH v3 00/13] Introduction of STiH418 based 4KOpen board Alain Volmat
2021-03-31 20:42 ` [PATCH v3 01/13] ARM: dts: sti: update flexgen compatible within stih418-clock Alain Volmat
2021-08-03 12:03   ` Patrice CHOTARD [this message]
2021-03-31 20:42 ` [PATCH v3 02/13] ARM: dts: sti: update flexgen compatible within stih407-clock Alain Volmat
2021-08-03 12:03   ` Patrice CHOTARD
2021-03-31 20:42 ` [PATCH v3 03/13] ARM: dts: sti: update flexgen compatible within stih410-clock Alain Volmat
2021-08-03 12:04   ` Patrice CHOTARD
2021-03-31 20:42 ` [PATCH v3 04/13] ARM: dts: sti: update clkgen-pll entries in stih407-clock Alain Volmat
2021-08-03 12:04   ` Patrice CHOTARD
2021-03-31 20:42 ` [PATCH v3 05/13] ARM: dts: sti: update clkgen-pll entries in stih410-clock Alain Volmat
2021-08-03 12:05   ` Patrice CHOTARD
2021-03-31 20:42 ` [PATCH v3 06/13] ARM: dts: sti: update clkgen-pll entries in stih418-clock Alain Volmat
2021-08-03 12:05   ` Patrice CHOTARD
2021-03-31 20:42 ` [PATCH v3 07/13] ARM: dts: sti: update clkgen-fsyn entries in stih407-clock Alain Volmat
2021-08-03 12:06   ` Patrice CHOTARD
2021-03-31 20:42 ` [PATCH v3 08/13] ARM: dts: sti: update clkgen-fsyn entries in stih410-clock Alain Volmat
2021-08-03 12:07   ` Patrice CHOTARD
2021-03-31 20:42 ` [PATCH v3 09/13] ARM: dts: sti: update clkgen-fsyn entries in stih418-clock Alain Volmat
2021-08-03 12:07   ` Patrice CHOTARD
2021-03-31 20:42 ` [PATCH v3 10/13] ARM: dts: sti: add the spinor controller node within stih407-family Alain Volmat
2021-08-03 12:08   ` Patrice CHOTARD
2021-03-31 20:42 ` [PATCH v3 11/13] ARM: dts: sti: disable rng11 on the stih418 platform Alain Volmat
2021-08-03 12:08   ` Patrice CHOTARD
2021-03-31 20:42 ` [PATCH v3 12/13] ARM: dts: sti: add the thermal sensor node within stih418 Alain Volmat
2021-08-03 12:08   ` Patrice CHOTARD
2021-03-31 20:42 ` [PATCH v3 13/13] ARM: dts: sti: Introduce 4KOpen (stih418-b2264) board Alain Volmat
2021-08-03 12:09   ` Patrice CHOTARD

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1d5c9ee4-a025-8520-0ab1-4b7f2f80bcc4@foss.st.com \
    --to=patrice.chotard@foss.st.com \
    --cc=arnd@arndb.de \
    --cc=avolmat@me.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --subject='Re: [PATCH v3 01/13] ARM: dts: sti: update flexgen compatible within stih418-clock' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).