* [patch] Re: AMD viper chipset and UDMA100
2001-09-27 23:37 ` Sean Swallow
@ 2001-09-28 10:21 ` Vojtech Pavlik
0 siblings, 0 replies; 9+ messages in thread
From: Vojtech Pavlik @ 2001-09-28 10:21 UTC (permalink / raw)
To: Sean Swallow; +Cc: Dan Hollis, linux-kernel, Jacob Luna Lundberg
[-- Attachment #1: Type: text/plain, Size: 367 bytes --]
On Thu, Sep 27, 2001 at 04:37:50PM -0700, Sean Swallow wrote:
> Vojtech,
>
> I would be interested in trying out your code.
Ok. It should make your ViperPlus work with UDMA100. The patch is
against 2.4.10, but will probably work with any similar kernel. It
completely replaces Andre's driver with mine. Find it attached.
Good luck.
--
Vojtech Pavlik
SuSE Labs
[-- Attachment #2: viper-vojtech.diff --]
[-- Type: text/plain, Size: 28266 bytes --]
diff -urN linux-2.4.10/drivers/ide/amd74xx.c linux/drivers/ide/amd74xx.c
--- linux-2.4.10/drivers/ide/amd74xx.c Mon Aug 13 23:56:19 2001
+++ linux/drivers/ide/amd74xx.c Fri Sep 28 12:07:50 2001
@@ -1,485 +1,431 @@
/*
- * linux/drivers/ide/amd74xx.c Version 0.05 June 9, 2000
+ * $Id: amd74xx.c,v 2.5 2001/09/28 11:44:00 vojtech Exp $
*
- * Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org>
- * May be copied or modified under the terms of the GNU General Public License
+ * Copyright (c) 2000-2001 Vojtech Pavlik
*
+ * Based on the work of:
+ * Andre Hedrick
+ */
+
+/*
+ * AMD 755/756/766 IDE driver for Linux.
+ *
+ * UDMA66 and higher modes are autoenabled only in case the BIOS has detected a
+ * 80 wire cable. To ignore the BIOS data and assume the cable is present, use
+ * 'ide0=ata66' or 'ide1=ata66' on the kernel command line.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
*/
#include <linux/config.h>
-#include <linux/types.h>
#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
#include <linux/ioport.h>
#include <linux/blkdev.h>
-#include <linux/hdreg.h>
-
-#include <linux/interrupt.h>
-#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/init.h>
#include <linux/ide.h>
-
#include <asm/io.h>
-#include <asm/irq.h>
-#include "ide_modes.h"
+#include "ide-timing.h"
-#define DISPLAY_VIPER_TIMINGS
+#define AMD_IDE_ENABLE 0x40
+#define AMD_IDE_CONFIG 0x41
+#define AMD_CABLE_DETECT 0x42
+#define AMD_DRIVE_TIMING 0x48
+#define AMD_8BIT_TIMING 0x4e
+#define AMD_ADDRESS_SETUP 0x4c
+#define AMD_UDMA_TIMING 0x50
+
+#define AMD_UDMA 0x07
+#define AMD_UDMA_33 0x01
+#define AMD_UDMA_66 0x02
+#define AMD_UDMA_100 0x03
+#define AMD_BAD_SWDMA 0x08
+#define AMD_BAD_FIFO 0x10
+
+/*
+ * AMD SouthBridge chips.
+ */
+
+static struct amd_ide_chip {
+ char *name;
+ unsigned short id;
+ unsigned char rev;
+ unsigned char flags;
+} amd_ide_chips[] = {
+ { "766 ViperPlus", PCI_DEVICE_ID_AMD_VIPER_7411, 0x00, AMD_UDMA_100 | AMD_BAD_FIFO },
+ { "756/c4+ Viper", PCI_DEVICE_ID_AMD_VIPER_7409, 0x07, AMD_UDMA_66 },
+ { "756 Viper", PCI_DEVICE_ID_AMD_VIPER_7409, 0x00, AMD_UDMA_66 | AMD_BAD_SWDMA },
+ { "755 Cobra", PCI_DEVICE_ID_AMD_COBRA_7401, 0x00, AMD_UDMA_33 | AMD_BAD_SWDMA },
+ { NULL }
+};
+
+static struct amd_ide_chip *amd_config;
+static unsigned char amd_enabled;
+static unsigned int amd_80w;
+static unsigned int amd_clock;
+
+static unsigned char amd_cyc2udma[] = { 6, 6, 5, 4, 0, 1, 1, 2, 2, 3, 3 };
+static unsigned char amd_udma2cyc[] = { 4, 6, 8, 10, 3, 2, 1, 1 };
+static char *amd_dma[] = { "MWDMA16", "UDMA33", "UDMA66", "UDMA100" };
+
+/*
+ * AMD /proc entry.
+ */
+
+#ifdef CONFIG_PROC_FS
-#if defined(DISPLAY_VIPER_TIMINGS) && defined(CONFIG_PROC_FS)
#include <linux/stat.h>
#include <linux/proc_fs.h>
-static int amd74xx_get_info(char *, char **, off_t, int);
-extern int (*amd74xx_display_info)(char *, char **, off_t, int); /* ide-proc.c */
-extern char *ide_media_verbose(ide_drive_t *);
+byte amd74xx_proc;
+int amd_base;
static struct pci_dev *bmide_dev;
+extern int (*amd74xx_display_info)(char *, char **, off_t, int); /* ide-proc.c */
-static int amd74xx_get_info (char *buffer, char **addr, off_t offset, int count)
-{
+#define amd_print(format, arg...) p += sprintf(p, format "\n" , ## arg)
+#define amd_print_drive(name, format, arg...)\
+ p += sprintf(p, name); for (i = 0; i < 4; i++) p += sprintf(p, format, ## arg); p += sprintf(p, "\n");
+
+static int amd_get_info(char *buffer, char **addr, off_t offset, int count)
+{
+ short speed[4], cycle[4], setup[4], active[4], recover[4], den[4],
+ uen[4], udma[4], active8b[4], recover8b[4];
+ struct pci_dev *dev = bmide_dev;
+ unsigned int v, u, i;
+ unsigned short c, w;
+ unsigned char t;
char *p = buffer;
- u32 bibma = pci_resource_start(bmide_dev, 4);
- u8 c0 = 0, c1 = 0;
- /*
- * at that point bibma+0x2 et bibma+0xa are byte registers
- * to investigate:
- */
- c0 = inb_p((unsigned short)bibma + 0x02);
- c1 = inb_p((unsigned short)bibma + 0x0a);
-
- p += sprintf(p, "\n AMD %04X VIPER Chipset.\n", bmide_dev->device);
- p += sprintf(p, "--------------- Primary Channel ---------------- Secondary Channel -------------\n");
- p += sprintf(p, " %sabled %sabled\n",
- (c0&0x80) ? "dis" : " en",
- (c1&0x80) ? "dis" : " en");
- p += sprintf(p, "--------------- drive0 --------- drive1 -------- drive0 ---------- drive1 ------\n");
- p += sprintf(p, "DMA enabled: %s %s %s %s\n",
- (c0&0x20) ? "yes" : "no ", (c0&0x40) ? "yes" : "no ",
- (c1&0x20) ? "yes" : "no ", (c1&0x40) ? "yes" : "no " );
- p += sprintf(p, "UDMA\n");
- p += sprintf(p, "DMA\n");
- p += sprintf(p, "PIO\n");
+ amd_print("----------AMD BusMastering IDE Configuration----------------");
- return p-buffer; /* => must be less than 4k! */
-}
-#endif /* defined(DISPLAY_VIPER_TIMINGS) && defined(CONFIG_PROC_FS) */
+ amd_print("Driver Version: 2.5");
+ amd_print("South Bridge: AMD-%s", amd_config->name);
-byte amd74xx_proc = 0;
+ pci_read_config_byte(dev, PCI_REVISION_ID, &t);
+ amd_print("Revision: IDE %#x", t);
+ amd_print("Highest DMA rate: %s", amd_dma[amd_config->flags & AMD_UDMA]);
-extern char *ide_xfer_verbose (byte xfer_rate);
+ amd_print("BM-DMA base: %#x", amd_base);
+ amd_print("PCI clock: %dMHz", amd_clock);
+
+ amd_print("-----------------------Primary IDE-------Secondary IDE------");
-static unsigned int amd74xx_swdma_check (struct pci_dev *dev)
-{
- unsigned int class_rev;
+ pci_read_config_byte(dev, AMD_IDE_CONFIG, &t);
+ amd_print("Prefetch Buffer: %10s%20s", (t & 0x80) ? "yes" : "no", (t & 0x20) ? "yes" : "no");
+ amd_print("Post Write Buffer: %10s%20s", (t & 0x40) ? "yes" : "no", (t & 0x10) ? "yes" : "no");
- if (dev->device == PCI_DEVICE_ID_AMD_VIPER_7411)
- return 0;
+ pci_read_config_byte(dev, AMD_IDE_ENABLE, &t);
+ amd_print("Enabled: %10s%20s", (t & 0x02) ? "yes" : "no", (t & 0x01) ? "yes" : "no");
- pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
- class_rev &= 0xff;
- return ((int) (class_rev >= 7) ? 1 : 0);
-}
+ c = inb(amd_base + 0x02) | (inb(amd_base + 0x0a) << 8);
+ amd_print("Simplex only: %10s%20s", (c & 0x80) ? "yes" : "no", (c & 0x8000) ? "yes" : "no");
-static int amd74xx_swdma_error(ide_drive_t *drive)
-{
- printk("%s: single-word DMA not support (revision < C4)\n", drive->name);
- return 0;
-}
+ amd_print("Cable Type: %10s%20s", (amd_80w & 1) ? "80w" : "40w", (amd_80w & 2) ? "80w" : "40w");
-/*
- * Here is where all the hard work goes to program the chipset.
- *
- */
-static int amd74xx_tune_chipset (ide_drive_t *drive, byte speed)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
- int err = 0;
- byte unit = (drive->select.b.unit & 0x01);
-#ifdef CONFIG_BLK_DEV_IDEDMA
- unsigned long dma_base = hwif->dma_base;
-#endif /* CONFIG_BLK_DEV_IDEDMA */
- byte drive_pci = 0x00;
- byte drive_pci2 = 0x00;
- byte ultra_timing = 0x00;
- byte dma_pio_timing = 0x00;
- byte pio_timing = 0x00;
-
- switch (drive->dn) {
- case 0: drive_pci = 0x53; drive_pci2 = 0x4b; break;
- case 1: drive_pci = 0x52; drive_pci2 = 0x4a; break;
- case 2: drive_pci = 0x51; drive_pci2 = 0x49; break;
- case 3: drive_pci = 0x50; drive_pci2 = 0x48; break;
- default:
- return -1;
- }
-
- pci_read_config_byte(dev, drive_pci, &ultra_timing);
- pci_read_config_byte(dev, drive_pci2, &dma_pio_timing);
- pci_read_config_byte(dev, 0x4c, &pio_timing);
-
-#ifdef DEBUG
- printk("%s: UDMA 0x%02x DMAPIO 0x%02x PIO 0x%02x ",
- drive->name, ultra_timing, dma_pio_timing, pio_timing);
-#endif
+ if (!amd_clock)
+ return p - buffer;
- ultra_timing &= ~0xC7;
- dma_pio_timing &= ~0xFF;
- pio_timing &= ~(0x03 << drive->dn);
-
-#ifdef DEBUG
- printk(":: UDMA 0x%02x DMAPIO 0x%02x PIO 0x%02x ",
- ultra_timing, dma_pio_timing, pio_timing);
-#endif
+ amd_print("-------------------drive0----drive1----drive2----drive3-----");
- switch(speed) {
-#ifdef CONFIG_BLK_DEV_IDEDMA
- case XFER_UDMA_5:
-#undef __CAN_MODE_5
-#ifdef __CAN_MODE_5
- ultra_timing |= 0x46;
- dma_pio_timing |= 0x20;
- break;
-#else
- printk("%s: setting to mode 4, driver problems in mode 5.\n", drive->name);
- speed = XFER_UDMA_4;
-#endif /* __CAN_MODE_5 */
- case XFER_UDMA_4:
- ultra_timing |= 0x45;
- dma_pio_timing |= 0x20;
- break;
- case XFER_UDMA_3:
- ultra_timing |= 0x44;
- dma_pio_timing |= 0x20;
- break;
- case XFER_UDMA_2:
- ultra_timing |= 0x40;
- dma_pio_timing |= 0x20;
- break;
- case XFER_UDMA_1:
- ultra_timing |= 0x41;
- dma_pio_timing |= 0x20;
- break;
- case XFER_UDMA_0:
- ultra_timing |= 0x42;
- dma_pio_timing |= 0x20;
- break;
- case XFER_MW_DMA_2:
- dma_pio_timing |= 0x20;
- break;
- case XFER_MW_DMA_1:
- dma_pio_timing |= 0x21;
- break;
- case XFER_MW_DMA_0:
- dma_pio_timing |= 0x77;
- break;
- case XFER_SW_DMA_2:
- if (!amd74xx_swdma_check(dev))
- return amd74xx_swdma_error(drive);
- dma_pio_timing |= 0x42;
- break;
- case XFER_SW_DMA_1:
- if (!amd74xx_swdma_check(dev))
- return amd74xx_swdma_error(drive);
- dma_pio_timing |= 0x65;
- break;
- case XFER_SW_DMA_0:
- if (!amd74xx_swdma_check(dev))
- return amd74xx_swdma_error(drive);
- dma_pio_timing |= 0xA8;
- break;
-#endif /* CONFIG_BLK_DEV_IDEDMA */
- case XFER_PIO_4:
- dma_pio_timing |= 0x20;
- break;
- case XFER_PIO_3:
- dma_pio_timing |= 0x22;
- break;
- case XFER_PIO_2:
- dma_pio_timing |= 0x42;
- break;
- case XFER_PIO_1:
- dma_pio_timing |= 0x65;
- break;
- case XFER_PIO_0:
- default:
- dma_pio_timing |= 0xA8;
- break;
- }
+ pci_read_config_byte(dev, AMD_ADDRESS_SETUP, &t);
+ pci_read_config_dword(dev, AMD_DRIVE_TIMING, &v);
+ pci_read_config_word(dev, AMD_8BIT_TIMING, &w);
+ pci_read_config_dword(dev, AMD_UDMA_TIMING, &u);
- pio_timing |= (0x03 << drive->dn);
+ for (i = 0; i < 4; i++) {
+ setup[i] = ((t >> ((3 - i) << 1)) & 0x3) + 1;
+ recover8b[i] = ((w >> ((1 - (i >> 1)) << 3)) & 0xf) + 1;
+ active8b[i] = ((w >> (((1 - (i >> 1)) << 3) + 4)) & 0xf) + 1;
+ active[i] = ((v >> (((3 - i) << 3) + 4)) & 0xf) + 1;
+ recover[i] = ((v >> ((3 - i) << 3)) & 0xf) + 1;
- if (!drive->init_speed)
- drive->init_speed = speed;
+ udma[i] = amd_udma2cyc[((u >> ((3 - i) << 3)) & 0x7)];
+ uen[i] = ((u >> ((3 - i) << 3)) & 0x40) ? 1 : 0;
+ den[i] = (c & ((i & 1) ? 0x40 : 0x20) << ((i & 2) << 2));
-#ifdef CONFIG_BLK_DEV_IDEDMA
- pci_write_config_byte(dev, drive_pci, ultra_timing);
-#endif /* CONFIG_BLK_DEV_IDEDMA */
- pci_write_config_byte(dev, drive_pci2, dma_pio_timing);
- pci_write_config_byte(dev, 0x4c, pio_timing);
+ if (den[i] && uen[i] && udma[i] == 1) {
+ speed[i] = amd_clock * 30;
+ cycle[i] = 666 / amd_clock;
+ continue;
+ }
+
+ speed[i] = 40 * amd_clock / ((den[i] && uen[i]) ? udma[i] : (active[i] + recover[i]) * 2);
+ cycle[i] = 1000 * ((den[i] && uen[i]) ? udma[i] : (active[i] + recover[i]) * 2) / amd_clock / 2;
+ }
+
+ amd_print_drive("Transfer Mode: ", "%10s", den[i] ? (uen[i] ? "UDMA" : "DMA") : "PIO");
+
+ amd_print_drive("Address Setup: ", "%8dns", 1000 * setup[i] / amd_clock);
+ amd_print_drive("Cmd Active: ", "%8dns", 1000 * active8b[i] / amd_clock);
+ amd_print_drive("Cmd Recovery: ", "%8dns", 1000 * recover8b[i] / amd_clock);
+ amd_print_drive("Data Active: ", "%8dns", 1000 * active[i] / amd_clock);
+ amd_print_drive("Data Recovery: ", "%8dns", 1000 * recover[i] / amd_clock);
+ amd_print_drive("Cycle Time: ", "%8dns", cycle[i]);
+ amd_print_drive("Transfer Rate: ", "%4d.%dMB/s", speed[i] / 10, speed[i] % 10);
+
+ return p - buffer; /* hoping it is less than 4K... */
+}
-#ifdef DEBUG
- printk(":: UDMA 0x%02x DMAPIO 0x%02x PIO 0x%02x\n",
- ultra_timing, dma_pio_timing, pio_timing);
#endif
-#ifdef CONFIG_BLK_DEV_IDEDMA
- if (speed > XFER_PIO_4) {
- outb(inb(dma_base+2)|(1<<(5+unit)), dma_base+2);
- } else {
- outb(inb(dma_base+2) & ~(1<<(5+unit)), dma_base+2);
+/*
+ * amd_set_speed() writes timing values to the chipset registers
+ */
+
+static void amd_set_speed(struct pci_dev *dev, unsigned char dn, struct ide_timing *timing)
+{
+ unsigned char t;
+
+ pci_read_config_byte(dev, AMD_ADDRESS_SETUP, &t);
+ t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(timing->setup, 1, 4) - 1) << ((3 - dn) << 1));
+ pci_write_config_byte(dev, AMD_ADDRESS_SETUP, t);
+
+ pci_write_config_byte(dev, AMD_8BIT_TIMING + (1 - (dn >> 1)),
+ ((FIT(timing->act8b, 1, 16) - 1) << 4) | (FIT(timing->rec8b, 1, 16) - 1));
+
+ pci_write_config_byte(dev, AMD_DRIVE_TIMING + (3 - dn),
+ ((FIT(timing->active, 1, 16) - 1) << 4) | (FIT(timing->recover, 1, 16) - 1));
+
+ switch (amd_config->flags & AMD_UDMA) {
+ case AMD_UDMA_33: t = timing->udma ? (0xc0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break;
+ case AMD_UDMA_66: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 2, 10)]) : 0x03; break;
+ case AMD_UDMA_100: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 1, 10)]) : 0x03; break;
+ default: return;
}
-#endif /* CONFIG_BLK_DEV_IDEDMA */
- err = ide_config_drive_speed(drive, speed);
- drive->current_speed = speed;
- return (err);
+ pci_write_config_byte(dev, AMD_UDMA_TIMING + (3 - dn), t);
}
-static void config_chipset_for_pio (ide_drive_t *drive)
+/*
+ * amd_set_drive() computes timing values configures the drive and
+ * the chipset to a desired transfer mode. It also can be called
+ * by upper layers.
+ */
+
+static int amd_set_drive(ide_drive_t *drive, unsigned char speed)
{
- unsigned short eide_pio_timing[6] = {960, 480, 240, 180, 120, 90};
- unsigned short xfer_pio = drive->id->eide_pio_modes;
- byte timing, speed, pio;
-
- pio = ide_get_best_pio_mode(drive, 255, 5, NULL);
-
- if (xfer_pio> 4)
- xfer_pio = 0;
-
- if (drive->id->eide_pio_iordy > 0) {
- for (xfer_pio = 5;
- xfer_pio>0 &&
- drive->id->eide_pio_iordy>eide_pio_timing[xfer_pio];
- xfer_pio--);
- } else {
- xfer_pio = (drive->id->eide_pio_modes & 4) ? 0x05 :
- (drive->id->eide_pio_modes & 2) ? 0x04 :
- (drive->id->eide_pio_modes & 1) ? 0x03 :
- (drive->id->tPIO & 2) ? 0x02 :
- (drive->id->tPIO & 1) ? 0x01 : xfer_pio;
- }
+ ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1);
+ struct ide_timing t, p;
+ int T, UT;
- timing = (xfer_pio >= pio) ? xfer_pio : pio;
+ if (speed != XFER_PIO_SLOW && speed != drive->current_speed)
+ if (ide_config_drive_speed(drive, speed))
+ printk(KERN_WARNING "ide%d: Drive %d didn't accept speed setting. Oh, well.\n",
+ drive->dn >> 1, drive->dn & 1);
- switch(timing) {
- case 4: speed = XFER_PIO_4;break;
- case 3: speed = XFER_PIO_3;break;
- case 2: speed = XFER_PIO_2;break;
- case 1: speed = XFER_PIO_1;break;
- default:
- speed = (!drive->id->tPIO) ? XFER_PIO_0 : XFER_PIO_SLOW;
- break;
+ T = 1000 / amd_clock;
+ UT = T / MIN(MAX(amd_config->flags & AMD_UDMA, 1), 2);
+
+ ide_timing_compute(drive, speed, &t, T, UT);
+
+ if (peer->present) {
+ ide_timing_compute(peer, peer->current_speed, &p, T, UT);
+ ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT);
}
- (void) amd74xx_tune_chipset(drive, speed);
+
+ if (speed == XFER_UDMA_5 && amd_clock <= 33) t.udma = 1;
+
+ amd_set_speed(HWIF(drive)->pci_dev, drive->dn, &t);
+
+ if (!drive->init_speed)
+ drive->init_speed = speed;
drive->current_speed = speed;
+
+ return 0;
}
-static void amd74xx_tune_drive (ide_drive_t *drive, byte pio)
+/*
+ * amd74xx_tune_drive() is a callback from upper layers for
+ * PIO-only tuning.
+ */
+
+static void amd74xx_tune_drive(ide_drive_t *drive, unsigned char pio)
{
- byte speed;
- switch(pio) {
- case 4: speed = XFER_PIO_4;break;
- case 3: speed = XFER_PIO_3;break;
- case 2: speed = XFER_PIO_2;break;
- case 1: speed = XFER_PIO_1;break;
- default: speed = XFER_PIO_0;break;
+ if (!((amd_enabled >> HWIF(drive)->channel) & 1))
+ return;
+
+ if (pio == 255) {
+ amd_set_drive(drive, ide_find_best_mode(drive, XFER_PIO | XFER_EPIO));
+ return;
}
- (void) amd74xx_tune_chipset(drive, speed);
+
+ amd_set_drive(drive, XFER_PIO_0 + MIN(pio, 5));
}
#ifdef CONFIG_BLK_DEV_IDEDMA
+
/*
- * This allows the configuration of ide_pci chipset registers
- * for cards that learn about the drive's UDMA, DMA, PIO capabilities
- * after the drive is reported by the OS.
+ * amd74xx_dmaproc() is a callback from upper layers that can do
+ * a lot, but we use it for DMA/PIO tuning only, delegating everything
+ * else to the default ide_dmaproc().
*/
-static int config_chipset_for_dma (ide_drive_t *drive)
+
+int amd74xx_dmaproc(ide_dma_action_t func, ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
- struct hd_driveid *id = drive->id;
- byte udma_66 = eighty_ninty_three(drive);
- byte udma_100 = (dev->device==PCI_DEVICE_ID_AMD_VIPER_7411) ? 1 : 0;
- byte speed = 0x00;
- int rval;
-
- if ((id->dma_ultra & 0x0020) && (udma_66)&& (udma_100)) {
- speed = XFER_UDMA_5;
- } else if ((id->dma_ultra & 0x0010) && (udma_66)) {
- speed = XFER_UDMA_4;
- } else if ((id->dma_ultra & 0x0008) && (udma_66)) {
- speed = XFER_UDMA_3;
- } else if (id->dma_ultra & 0x0004) {
- speed = XFER_UDMA_2;
- } else if (id->dma_ultra & 0x0002) {
- speed = XFER_UDMA_1;
- } else if (id->dma_ultra & 0x0001) {
- speed = XFER_UDMA_0;
- } else if (id->dma_mword & 0x0004) {
- speed = XFER_MW_DMA_2;
- } else if (id->dma_mword & 0x0002) {
- speed = XFER_MW_DMA_1;
- } else if (id->dma_mword & 0x0001) {
- speed = XFER_MW_DMA_0;
- } else {
- return ((int) ide_dma_off_quietly);
- }
- (void) amd74xx_tune_chipset(drive, speed);
+ if (func == ide_dma_check) {
- rval = (int)( ((id->dma_ultra >> 11) & 3) ? ide_dma_on :
- ((id->dma_ultra >> 8) & 7) ? ide_dma_on :
- ((id->dma_mword >> 8) & 7) ? ide_dma_on :
- ide_dma_off_quietly);
+ short w80 = HWIF(drive)->udma_four;
- return rval;
+ short speed = ide_find_best_mode(drive,
+ XFER_PIO | XFER_EPIO | XFER_MWDMA | XFER_UDMA |
+ ((amd_config->flags & AMD_BAD_SWDMA) ? 0 : XFER_SWDMA) |
+ (w80 && (amd_config->flags & AMD_UDMA) >= AMD_UDMA_66 ? XFER_UDMA_66 : 0) |
+ (w80 && (amd_config->flags & AMD_UDMA) >= AMD_UDMA_100 ? XFER_UDMA_100 : 0));
+
+ amd_set_drive(drive, speed);
+
+ func = (HWIF(drive)->autodma && (speed & XFER_MODE) != XFER_PIO)
+ ? ide_dma_on : ide_dma_off_quietly;
+ }
+
+ return ide_dmaproc(func, drive);
}
-static int config_drive_xfer_rate (ide_drive_t *drive)
+#endif /* CONFIG_BLK_DEV_IDEDMA */
+
+/*
+ * The initialization callback. Here we determine the IDE chip type
+ * and initialize its drive independent registers.
+ */
+
+unsigned int __init pci_init_amd74xx(struct pci_dev *dev, const char *name)
{
- struct hd_driveid *id = drive->id;
- ide_dma_action_t dma_func = ide_dma_on;
+ unsigned char t;
+ unsigned int u;
+ int i;
- if (id && (id->capability & 1) && HWIF(drive)->autodma) {
- /* Consult the list of known "bad" drives */
- if (ide_dmaproc(ide_dma_bad_drive, drive)) {
- dma_func = ide_dma_off;
- goto fast_ata_pio;
- }
- dma_func = ide_dma_off_quietly;
- if (id->field_valid & 4) {
- if (id->dma_ultra & 0x002F) {
- /* Force if Capable UltraDMA */
- dma_func = config_chipset_for_dma(drive);
- if ((id->field_valid & 2) &&
- (dma_func != ide_dma_on))
- goto try_dma_modes;
- }
- } else if (id->field_valid & 2) {
-try_dma_modes:
- if ((id->dma_mword & 0x0007) ||
- ((id->dma_1word & 0x007) &&
- (amd74xx_swdma_check(HWIF(drive)->pci_dev)))) {
- /* Force if Capable regular DMA modes */
- dma_func = config_chipset_for_dma(drive);
- if (dma_func != ide_dma_on)
- goto no_dma_set;
- }
-
- } else if (ide_dmaproc(ide_dma_good_drive, drive)) {
- if (id->eide_dma_time > 150) {
- goto no_dma_set;
- }
- /* Consult the list of known "good" drives */
- dma_func = config_chipset_for_dma(drive);
- if (dma_func != ide_dma_on)
- goto no_dma_set;
- } else {
- goto fast_ata_pio;
+/*
+ * Find out what AMD IDE is this.
+ */
+
+ for (amd_config = amd_ide_chips; amd_config->id; amd_config++) {
+ pci_read_config_byte(dev, PCI_REVISION_ID, &t);
+ if (dev->device == amd_config->id && t >= amd_config->rev)
+ break;
}
- } else if ((id->capability & 8) || (id->field_valid & 2)) {
-fast_ata_pio:
- dma_func = ide_dma_off_quietly;
-no_dma_set:
- config_chipset_for_pio(drive);
+ if (!amd_config->id) {
+ printk(KERN_WARNING "AMD74xx: Unknown AMD IDE Chip, contact Vojtech Pavlik <vojtech@ucw.cz>\n");
+ return -ENODEV;
}
- return HWIF(drive)->dmaproc(dma_func, drive);
-}
/*
- * amd74xx_dmaproc() initiates/aborts (U)DMA read/write operations on a drive.
+ * Check 80-wire cable presence.
*/
-int amd74xx_dmaproc (ide_dma_action_t func, ide_drive_t *drive)
-{
- switch (func) {
- case ide_dma_check:
- return config_drive_xfer_rate(drive);
- default:
+ switch (amd_config->flags & AMD_UDMA) {
+
+ case AMD_UDMA_100:
+ pci_read_config_byte(dev, AMD_CABLE_DETECT, &t);
+ amd_80w = ((u & 0x3) ? 1 : 0) | ((u & 0xc) ? 2 : 0);
+ for (i = 24; i >= 0; i -= 8)
+ if (((u >> i) & 4) && !(amd_80w & (1 << (1 - (i >> 4))))) {
+ printk(KERN_WARNING "AMD74xx: Bios didn't set cable bits corectly. Enabling workaround.\n");
+ amd_80w |= (1 << (1 - (i >> 4)));
+ }
+ break;
+
+ case AMD_UDMA_66:
+ pci_read_config_dword(dev, AMD_UDMA_TIMING, &u);
+ for (i = 24; i >= 0; i -= 8)
+ if ((u >> i) & 4)
+ amd_80w |= (1 << (1 - (i >> 4)));
break;
}
- return ide_dmaproc(func, drive); /* use standard DMA stuff */
-}
-#endif /* CONFIG_BLK_DEV_IDEDMA */
-unsigned int __init pci_init_amd74xx (struct pci_dev *dev, const char *name)
-{
- unsigned long fixdma_base = pci_resource_start(dev, 4);
+ pci_read_config_dword(dev, AMD_IDE_ENABLE, &u);
+ amd_enabled = ((u & 1) ? 2 : 0) | ((u & 2) ? 1 : 0);
-#ifdef CONFIG_BLK_DEV_IDEDMA
- if (!amd74xx_swdma_check(dev))
- printk("%s: disabling single-word DMA support (revision < C4)\n", name);
-#endif /* CONFIG_BLK_DEV_IDEDMA */
+/*
+ * Take care of prefetch & postwrite.
+ */
- if (!fixdma_base) {
- /*
- *
- */
- } else {
- /*
- * enable DMA capable bit, and "not" simplex only
- */
- outb(inb(fixdma_base+2) & 0x60, fixdma_base+2);
+ pci_read_config_byte(dev, AMD_IDE_CONFIG, &t);
+ pci_write_config_byte(dev, AMD_IDE_CONFIG,
+ (amd_config->flags & AMD_BAD_FIFO) ? (t & 0x0f) : (t | 0xf0));
- if (inb(fixdma_base+2) & 0x80)
- printk("%s: simplex device: DMA will fail!!\n", name);
- }
-#if defined(DISPLAY_VIPER_TIMINGS) && defined(CONFIG_PROC_FS)
+/*
+ * Print the boot message.
+ */
+
+ pci_read_config_byte(dev, PCI_REVISION_ID, &t);
+ printk(KERN_INFO "AMD74xx: AMD-%s (rev %02x) IDE %s controller on pci%s\n",
+ amd_config->name, t, amd_dma[amd_config->flags & AMD_UDMA], dev->slot_name);
+
+/*
+ * Register /proc/ide/amd74xx entry
+ */
+
+#ifdef CONFIG_PROC_FS
if (!amd74xx_proc) {
- amd74xx_proc = 1;
+ amd_base = pci_resource_start(dev, 4);
bmide_dev = dev;
- amd74xx_display_info = &amd74xx_get_info;
+ amd74xx_display_info = &amd_get_info;
+ amd74xx_proc = 1;
+
}
-#endif /* DISPLAY_VIPER_TIMINGS && CONFIG_PROC_FS */
+#endif
return 0;
}
-unsigned int __init ata66_amd74xx (ide_hwif_t *hwif)
+unsigned int __init ata66_amd74xx(ide_hwif_t *hwif)
{
-#ifdef CONFIG_AMD74XX_OVERRIDE
- byte ata66 = 1;
-#else
- byte ata66 = 0;
-#endif /* CONFIG_AMD74XX_OVERRIDE */
-
-#if 0
- pci_read_config_byte(hwif->pci_dev, 0x48, &ata66);
- return ((ata66 & 0x02) ? 0 : 1);
-#endif
- return ata66;
+ return ((amd_enabled & amd_80w) >> hwif->channel) & 1;
}
-void __init ide_init_amd74xx (ide_hwif_t *hwif)
+void __init ide_init_amd74xx(ide_hwif_t *hwif)
{
- hwif->tuneproc = &amd74xx_tune_drive;
- hwif->speedproc = &amd74xx_tune_chipset;
+ int i;
-#ifndef CONFIG_BLK_DEV_IDEDMA
- hwif->drives[0].autotune = 1;
- hwif->drives[1].autotune = 1;
+ hwif->tuneproc = &amd74xx_tune_drive;
+ hwif->speedproc = &amd_set_drive;
hwif->autodma = 0;
- return;
-#else
+ for (i = 0; i < 2; i++) {
+ hwif->drives[i].io_32bit = 1;
+ hwif->drives[i].unmask = 1;
+ hwif->drives[i].autotune = 1;
+ hwif->drives[i].dn = hwif->channel * 2 + i;
+ }
+
+#ifdef CONFIG_BLK_DEV_IDEDMA
if (hwif->dma_base) {
hwif->dmaproc = &amd74xx_dmaproc;
+#ifdef CONFIG_IDEDMA_AUTO
if (!noautodma)
hwif->autodma = 1;
- } else {
- hwif->autodma = 0;
- hwif->drives[0].autotune = 1;
- hwif->drives[1].autotune = 1;
+#endif
}
#endif /* CONFIG_BLK_DEV_IDEDMA */
}
-void __init ide_dmacapable_amd74xx (ide_hwif_t *hwif, unsigned long dmabase)
+/*
+ * We allow the BM-DMA driver only work on enabled interfaces.
+ */
+
+void __init ide_dmacapable_amd74xx(ide_hwif_t *hwif, unsigned long dmabase)
{
- ide_setup_dma(hwif, dmabase, 8);
+ if ((amd_enabled >> hwif->channel) & 1)
+ ide_setup_dma(hwif, dmabase, 8);
}
diff -urN linux-2.4.10/drivers/ide/ide-pci.c linux/drivers/ide/ide-pci.c
--- linux-2.4.10/drivers/ide/ide-pci.c Sun Sep 9 19:43:02 2001
+++ linux/drivers/ide/ide-pci.c Fri Sep 28 12:11:22 2001
@@ -432,14 +432,14 @@
{DEVID_CY82C693,"CY82C693", PCI_CY82C693, NULL, INIT_CY82C693, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0 },
{DEVID_HINT, "HINT_IDE", NULL, NULL, NULL, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0 },
{DEVID_CS5530, "CS5530", PCI_CS5530, NULL, INIT_CS5530, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0 },
- {DEVID_AMD7401, "AMD7401", NULL, NULL, NULL, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0 },
+ {DEVID_AMD7401, "AMD7401", PCI_AMD74XX, ATA66_AMD74XX, INIT_AMD74XX, DMA_AMD74XX, {{0x40,0x01,0x01}, {0x40,0x02,0x02}}, ON_BOARD, 0 },
{DEVID_AMD7409, "AMD7409", PCI_AMD74XX, ATA66_AMD74XX, INIT_AMD74XX, DMA_AMD74XX, {{0x40,0x01,0x01}, {0x40,0x02,0x02}}, ON_BOARD, 0 },
{DEVID_AMD7411, "AMD7411", PCI_AMD74XX, ATA66_AMD74XX, INIT_AMD74XX, DMA_AMD74XX, {{0x40,0x01,0x01}, {0x40,0x02,0x02}}, ON_BOARD, 0 },
{DEVID_PDCADMA, "PDCADMA", PCI_PDCADMA, ATA66_PDCADMA, INIT_PDCADMA, DMA_PDCADMA, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, OFF_BOARD, 0 },
{DEVID_SLC90E66,"SLC90E66", PCI_SLC90E66, ATA66_SLC90E66, INIT_SLC90E66, NULL, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0 },
- {DEVID_OSB4, "ServerWorks OSB4", PCI_SVWKS, ATA66_SVWKS, INIT_SVWKS, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0 },
- {DEVID_CSB5, "ServerWorks CSB5", PCI_SVWKS, ATA66_SVWKS, INIT_SVWKS, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0 },
- {DEVID_ITE8172G,"IT8172G", PCI_IT8172, NULL, INIT_IT8172, NULL, {{0x00,0x00,0x00}, {0x40,0x00,0x01}}, ON_BOARD, 0 },
+ {DEVID_OSB4, "ServerWorks OSB4", PCI_SVWKS, ATA66_SVWKS, INIT_SVWKS, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0 },
+ {DEVID_CSB5, "ServerWorks CSB5", PCI_SVWKS, ATA66_SVWKS, INIT_SVWKS, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0 },
+ {DEVID_ITE8172G,"IT8172G", PCI_IT8172, NULL, INIT_IT8172, NULL, {{0x00,0x00,0x00}, {0x40,0x00,0x01}}, ON_BOARD, 0 },
{IDE_PCI_DEVID_NULL, "PCI_IDE", NULL, NULL, NULL, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0 }};
/*
^ permalink raw reply [flat|nested] 9+ messages in thread