LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Johannes Erdfelt <johannes@erdfelt.com>
To: Simon Kirby <sim@netnation.com>
Cc: Greg KH <greg@kroah.com>,
	Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: Linux-2.4.11-pre5
Date: Sun, 7 Oct 2001 16:19:03 -0400	[thread overview]
Message-ID: <20011007161903.H14479@sventech.com> (raw)
In-Reply-To: <Pine.LNX.4.33.0110071148380.7382-100000@penguin.transmeta.com> <20011007121851.A1137@netnation.com> <20011007153433.G14479@sventech.com> <20011007124038.A22923@netnation.com>
In-Reply-To: <20011007124038.A22923@netnation.com>; from sim@netnation.com on Sun, Oct 07, 2001 at 12:40:38PM -0700

On Sun, Oct 07, 2001, Simon Kirby <sim@netnation.com> wrote:
> On Sun, Oct 07, 2001 at 03:34:33PM -0400, Johannes Erdfelt wrote:
> 
> > > hub.c: USB new device connect on bus1/2, assigned device number 2
> > > usb_control/bulk_msg: timeout
> > > usb.c: USB device not accepting new address=2 (error=-110)
> > 
> > Could you give me the output of /proc/interrupts?
> 
>            CPU0       CPU1
>   0:      71555      64454    IO-APIC-edge  timer
>   1:       1355       1274    IO-APIC-edge  keyboard
>   2:          0          0          XT-PIC  cascade
>   5:          0          0    IO-APIC-edge  NE2000
>  14:       4157       5136    IO-APIC-edge  ide0
>  15:          2         19    IO-APIC-edge  ide1
>  16:       2462       2381   IO-APIC-level  eth0
>  17:          0          0   IO-APIC-level  Trident 4DWave NX
>  18:          1          1   IO-APIC-level  bttv
>  19:       2330       2467   IO-APIC-level  aic7xxx, usb-uhci
> NMI:          0          0
> LOC:     135894     135912
> ERR:          0
> MIS:          0
> 
> > Do you see any other messages in dmesg?
> 
> Here is an entire "insmod uhci" output:
> 
> uhci.c: USB Universal Host Controller Interface driver v1.1
> uhci.c: USB UHCI at I/O 0xb400, IRQ 19
> usb.c: new USB bus registered, assigned bus number 1
> hub.c: USB hub found
> hub.c: 2 ports detected
> hub.c: USB new device connect on bus1/2, assigned device number 2
> usb_control/bulk_msg: timeout
> usb.c: USB device not accepting new address=2 (error=-110)
> hub.c: USB new device connect on bus1/2, assigned device number 3
> usb_control/bulk_msg: timeout
> usb.c: USB device not accepting new address=3 (error=-110)
> 
> > What UHCI controller is this? (lspci -v)
> 
> 00:04.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
>         Flags: bus master, medium devsel, latency 32, IRQ 19
>         I/O ports at b400 [size=32]
> 
> It's on an ASUS P2B-DS (with broken USB resistor shorted).

Ahh, could you replace this line:

        pci_write_config_word(uhci->dev, USBLEGSUP, 0);

with this:

        pci_write_config_word(uhci->dev, USBLEGSUP, USBLEGSUP_DEFAULT);

and try again?

JE


  reply	other threads:[~2001-10-07 20:16 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2001-10-07 18:49 Linux-2.4.11-pre5 Linus Torvalds
2001-10-07 19:18 ` Linux-2.4.11-pre5 Simon Kirby
2001-10-07 19:34   ` Linux-2.4.11-pre5 Johannes Erdfelt
2001-10-07 19:40     ` Linux-2.4.11-pre5 Simon Kirby
2001-10-07 20:19       ` Johannes Erdfelt [this message]
2001-10-07 20:33         ` [patch] uhci.c interrupts Johannes Erdfelt
2001-10-08 19:02         ` Linux-2.4.11-pre5 Simon Kirby
2001-10-08 19:47           ` Linux-2.4.11-pre5 Simon Kirby
2001-10-08 20:21             ` Linux-2.4.11-pre5 Johannes Erdfelt
2001-10-08 20:30               ` Linux-2.4.11-pre5 Simon Kirby
2001-10-07 20:49 ` Linux-2.4.11-pre5 Adrian Bunk
2001-10-07 21:17   ` Linux-2.4.11-pre5 Alessandro Suardi
2001-10-07 23:46     ` Linux-2.4.11-pre5 Linus Torvalds
2001-10-08 16:32       ` [PATCH] Linux-2.4.11-pre5 Robert Schiele
2001-10-07 21:48   ` Linux-2.4.11-pre5 Alan Cox
2001-10-08  1:11   ` Linux-2.4.11-pre5 Keith Owens

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20011007161903.H14479@sventech.com \
    --to=johannes@erdfelt.com \
    --cc=greg@kroah.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sim@netnation.com \
    --subject='Re: Linux-2.4.11-pre5' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).