LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* APM Suspend Problem
@ 2003-11-27  6:20 Misha Nasledov
  2003-11-27 11:46 ` Felipe Alfaro Solana
                   ` (3 more replies)
  0 siblings, 4 replies; 28+ messages in thread
From: Misha Nasledov @ 2003-11-27  6:20 UTC (permalink / raw)
  To: linux-kernel

[-- Attachment #1: Type: text/plain, Size: 1126 bytes --]

Hi,

Since about 2.6.0-test9, my ThinkPad T21 no longer suspends with APM. I had
issues with it suspending before, I don't remember exactly what issues, but I
know that it definitely worked in -test2. When I hit the key on my laptop to
suspend, it will turn off the LCD and the HD will spin down, but the machine
will not actually suspend. Here is what is printed out on the console when I
hit the suspend key and then when I hit another key to "wake" it up:

hdc: start_power_step(step: 0)
hdc: completing PM request, suspend
hda: start_power_step(step: 0)
hda: start_power_step(step: 1)
hda: complete_power_step(step: 1, stat: 50, err: 0)
hda: completing PM request, suspend
hda: Wakeup request inited, waiting for !BSY...
hda: start_power_step(step: 1000)
blk: queue c138fa00, I/O limit 4095Mb (mask 0xffffffff)
hda: completing PM request, resume
hdc: Wakeup request inited, waiting for !BSY...
hdc: start_power_step(step: 1000)
hdc: completing PM request, resume

I have attached the output of dmesg and my .config file. I am using
2.6.0-test11, of course.
-- 
Misha Nasledov
misha@nasledov.com
http://nasledov.com/misha/

[-- Attachment #2: DMESG-2.6 --]
[-- Type: text/plain, Size: 8890 bytes --]

Linux version 2.6.0-test11 (root@aurora.alkaid.org) (gcc version 3.3.2 (Debian)) #1 Wed Nov 26 19:07:33 PST 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
 BIOS-e820: 000000000fff0000 - 000000000fffec00 (ACPI data)
 BIOS-e820: 000000000fffec00 - 0000000010000000 (ACPI NVS)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
255MB LOWMEM available.
On node 0 totalpages: 65520
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 61424 pages, LIFO batch:14
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
IBM machine detected. Enabling interrupts during APM calls.
IBM machine detected. Disabling SMBus accesses.
Building zonelist for node : 0
Kernel command line: root=/dev/hda1 idebus=66 video=vesa:mtrr vga=0x317
ide_setup: idebus=66
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 796.590 MHz processor.
Console: colour dummy device 80x25
Memory: 255120k/262080k available (2406k kernel code, 6232k reserved, 805k data, 224k init, 0k highmem)
Calibrating delay loop... 1572.86 BogoMIPS
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU:     After generic identify, caps: 0383f9ff 00000000 00000000 00000000
CPU:     After vendor identify, caps: 0383f9ff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU:     After all inits, caps: 0383f9ff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f7210
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xb1ef, dseg 0x400
pnp: 00:00: ioport range 0x15e8-0x15ef has been reserved
pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0b: ioport range 0x1000-0x103f has been reserved
pnp: 00:0b: ioport range 0x1040-0x104f has been reserved
PnPBIOS: 20 nodes reported by PnP BIOS; 20 recorded by driver
Linux Kernel Card Services
  options:  [pci] [cardbus] [pm]
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Address space collision on region 7 of bridge 0000:00:07.3 [1000:103f]
PCI: Address space collision on region 8 of bridge 0000:00:07.3 [1040:105f]
PCI: Discovered primary peer bus 08 [IRQ]
PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
vesafb: framebuffer at 0xf0000000, mapped to 0xd0800000, size 8192k
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: protected mode interface info at c000:8704
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
SBF: ACPI BOOT descriptor is wrong length (39)
SBF: Simple Boot Flag extension found and enabled.
SBF: Setting boot flags 0x1
speedstep-smi: signature:0x47534943, command:0x008200b2, event:0x00c000b3, perf_level:0x07d00000.
speedstep-smi: could not detect low and high frequencies by SMI call.
cpufreq: change to 0 MHz succeded
cpufreq: change to 4 MHz succeded
speedstep-smi: workaround worked.
cpufreq: currently at high speed setting - 800 MHz
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
udf: registering filesystem
Initializing Cryptographic API
Limiting direct PCI/PCI transfers.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Console: switching to colour frame buffer device 128x48
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: AGP aperture is 64M @ 0xf8000000
Hangcheck: starting hangcheck timer 0.5.0 (tick is 180 seconds, margin is 60 seconds).
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 66MHz system bus speed for PIO modes
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1c00-0x1c07, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1c08-0x1c0f, BIOS settings: hdc:DMA, hdd:pio
hda: TOSHIBA MK4019GAX, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: MATSHITADVD-ROM SR-8175, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78140160 sectors (40007 MB), CHS=65535/16/63, UDMA(33)
 hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
hdc: ATAPI 24X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Console: switching to colour frame buffer device 128x48
PCI: Found IRQ 11 for device 0000:00:02.0
PCI: Sharing IRQ 11 with 0000:00:05.0
PCI: Sharing IRQ 11 with 0000:01:00.0
Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta: ISA IRQ list 06b8, PCI irq11
Socket status: 30000006
PCI: Found IRQ 11 for device 0000:00:02.1
Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta: ISA IRQ list 06b8, PCI irq11
Socket status: 30000006
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
PCI: Found IRQ 11 for device 0000:00:07.2
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: irq 11, io base 00001c20
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
drivers/usb/core/usb.c: registered new driver hiddev
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: PC Speaker
input: PS/2 Generic Mouse on isa0060/serio1
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Translated Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
ip_tables: (C) 2000-2002 Netfilter core team
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 224k freed
Adding 498952k swap on /dev/hda3.  Priority:-1 extents:1
EXT3 FS on hda1, internal journal
PCI: Found IRQ 11 for device 0000:00:05.0
PCI: Sharing IRQ 11 with 0000:00:02.0
PCI: Sharing IRQ 11 with 0000:01:00.0
Crystal 4280/46xx + AC97 Audio, version 1.28.32, 18:57:43 Nov 26 2003
cs46xx: Card found at 0xe8100000 and 0xe8000000, IRQ 11
cs46xx: Thinkpad 600X/A20/T20 (1014:0153) at 0xe8100000/0xe8000000, IRQ 11
ac97_codec: AC97 Audio codec, id: CRY20 (Cirrus Logic CS4297A rev B)
PCI: Found IRQ 11 for device 0000:00:03.0
PCI: Sharing IRQ 11 with 0000:00:03.1
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:00:03.0: 3Com PCI 3c556B Laptop Hurricane at 0x1800. Vers LK1.1.19
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Disabled Privacy Extensions on device c03ea200(lo)
eth0: no IPv6 routers present
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: clean.
cs: IO port probe 0x0a00-0x0aff: clean.

[-- Attachment #3: config-2.6.0-test11.gz --]
[-- Type: application/octet-stream, Size: 6899 bytes --]

^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: APM Suspend Problem
  2003-11-27  6:20 APM Suspend Problem Misha Nasledov
@ 2003-11-27 11:46 ` Felipe Alfaro Solana
  2003-11-27 20:22   ` Misha Nasledov
  2003-11-27 22:58 ` Benjamin Herrenschmidt
                   ` (2 subsequent siblings)
  3 siblings, 1 reply; 28+ messages in thread
From: Felipe Alfaro Solana @ 2003-11-27 11:46 UTC (permalink / raw)
  To: Misha Nasledov; +Cc: Linux Kernel Mailinglist

[-- Attachment #1: Type: text/plain, Size: 632 bytes --]

On Thu, 2003-11-27 at 07:20, Misha Nasledov wrote:
> Hi,
> 
> Since about 2.6.0-test9, my ThinkPad T21 no longer suspends with APM. I had
> issues with it suspending before, I don't remember exactly what issues, but I
> know that it definitely worked in -test2. When I hit the key on my laptop to
> suspend, it will turn off the LCD and the HD will spin down, but the machine
> will not actually suspend. Here is what is printed out on the console when I
> hit the suspend key and then when I hit another key to "wake" it up:

Could you please try the attached patch? It allows my system to suspend
and resume using APM flawlessly.

[-- Attachment #2: pm-1013.patch --]
[-- Type: text/x-patch, Size: 552 bytes --]

--- 1.11/drivers/base/power/resume.c	Mon Aug 25 11:08:21 2003
+++ edited/drivers/base/power/resume.c	Fri Oct 10 21:06:07 2003
@@ -22,8 +22,17 @@
 
 int resume_device(struct device * dev)
 {
-	if (dev->bus && dev->bus->resume)
-		return dev->bus->resume(dev);
+	if (dev->bus && dev->bus->resume) {
+		int retval;
+
+		/* drop lock so the call can use device_del() to clean up
+		 * after unplugged (or otherwise vanished) child devices
+		 */
+		up(&dpm_sem);
+		retval = dev->bus->resume(dev);
+		down(&dpm_sem);
+		return retval;
+	}
 	return 0;
 }
 

^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: APM Suspend Problem
  2003-11-27 11:46 ` Felipe Alfaro Solana
@ 2003-11-27 20:22   ` Misha Nasledov
  0 siblings, 0 replies; 28+ messages in thread
From: Misha Nasledov @ 2003-11-27 20:22 UTC (permalink / raw)
  To: Felipe Alfaro Solana; +Cc: Linux Kernel Mailinglist

No luck; my ThinkPad still does not go into the proper power-saving mode. The LCD
blanks out and the HD spins down, but it is not a real sleep mode.

On Thu, Nov 27, 2003 at 12:46:06PM +0100, Felipe Alfaro Solana wrote:
> On Thu, 2003-11-27 at 07:20, Misha Nasledov wrote:
> > Since about 2.6.0-test9, my ThinkPad T21 no longer suspends with APM. I had
> > issues with it suspending before, I don't remember exactly what issues, but I
> > know that it definitely worked in -test2. When I hit the key on my laptop to
> > suspend, it will turn off the LCD and the HD will spin down, but the machine
> > will not actually suspend. Here is what is printed out on the console when I
> > hit the suspend key and then when I hit another key to "wake" it up:
> 
> Could you please try the attached patch? It allows my system to suspend
> and resume using APM flawlessly.

> --- 1.11/drivers/base/power/resume.c	Mon Aug 25 11:08:21 2003
> +++ edited/drivers/base/power/resume.c	Fri Oct 10 21:06:07 2003
> @@ -22,8 +22,17 @@
>  
>  int resume_device(struct device * dev)
>  {
> -	if (dev->bus && dev->bus->resume)
> -		return dev->bus->resume(dev);
> +	if (dev->bus && dev->bus->resume) {
> +		int retval;
> +
> +		/* drop lock so the call can use device_del() to clean up
> +		 * after unplugged (or otherwise vanished) child devices
> +		 */
> +		up(&dpm_sem);
> +		retval = dev->bus->resume(dev);
> +		down(&dpm_sem);
> +		return retval;
> +	}
>  	return 0;
>  }

-- 
Misha Nasledov
misha@nasledov.com
http://nasledov.com/misha/

^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: APM Suspend Problem
  2003-11-27  6:20 APM Suspend Problem Misha Nasledov
  2003-11-27 11:46 ` Felipe Alfaro Solana
@ 2003-11-27 22:58 ` Benjamin Herrenschmidt
  2003-11-27 23:33   ` Misha Nasledov
  2003-11-28 21:28 ` William Lee Irwin III
  2003-12-02 21:44 ` john stultz
  3 siblings, 1 reply; 28+ messages in thread
From: Benjamin Herrenschmidt @ 2003-11-27 22:58 UTC (permalink / raw)
  To: Misha Nasledov; +Cc: Linux Kernel list


> hdc: start_power_step(step: 0)
> hdc: completing PM request, suspend
> hda: start_power_step(step: 0)
> hda: start_power_step(step: 1)
> hda: complete_power_step(step: 1, stat: 50, err: 0)
> hda: completing PM request, suspend
> hda: Wakeup request inited, waiting for !BSY...
> hda: start_power_step(step: 1000)
> blk: queue c138fa00, I/O limit 4095Mb (mask 0xffffffff)
> hda: completing PM request, resume
> hdc: Wakeup request inited, waiting for !BSY...
> hdc: start_power_step(step: 1000)
> hdc: completing PM request, resume

Those messages are harmless, they just show normal operations
of the IDE suspend code. I beleive it's probably time to disable
the debug code in there ;)

Ben.


^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: APM Suspend Problem
  2003-11-27 22:58 ` Benjamin Herrenschmidt
@ 2003-11-27 23:33   ` Misha Nasledov
  0 siblings, 0 replies; 28+ messages in thread
From: Misha Nasledov @ 2003-11-27 23:33 UTC (permalink / raw)
  To: Benjamin Herrenschmidt; +Cc: Linux Kernel list

I figured as much, but my laptop still fails to suspend as it did in -test2
and the 2.4 kernel series.

On Fri, Nov 28, 2003 at 09:58:21AM +1100, Benjamin Herrenschmidt wrote:
> > hdc: start_power_step(step: 0)
> > hdc: completing PM request, suspend
> > hda: start_power_step(step: 0)
> > hda: start_power_step(step: 1)
> > hda: complete_power_step(step: 1, stat: 50, err: 0)
> > hda: completing PM request, suspend
> > hda: Wakeup request inited, waiting for !BSY...
> > hda: start_power_step(step: 1000)
> > blk: queue c138fa00, I/O limit 4095Mb (mask 0xffffffff)
> > hda: completing PM request, resume
> > hdc: Wakeup request inited, waiting for !BSY...
> > hdc: start_power_step(step: 1000)
> > hdc: completing PM request, resume
> 
> Those messages are harmless, they just show normal operations
> of the IDE suspend code. I beleive it's probably time to disable
> the debug code in there ;)

-- 
Misha Nasledov
misha@nasledov.com
http://nasledov.com/misha/

^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: APM Suspend Problem
  2003-11-27  6:20 APM Suspend Problem Misha Nasledov
  2003-11-27 11:46 ` Felipe Alfaro Solana
  2003-11-27 22:58 ` Benjamin Herrenschmidt
@ 2003-11-28 21:28 ` William Lee Irwin III
  2003-11-28 21:50   ` Misha Nasledov
  2003-12-02 21:44 ` john stultz
  3 siblings, 1 reply; 28+ messages in thread
From: William Lee Irwin III @ 2003-11-28 21:28 UTC (permalink / raw)
  To: Misha Nasledov; +Cc: linux-kernel

On Wed, Nov 26, 2003 at 10:20:57PM -0800, Misha Nasledov wrote:
> Since about 2.6.0-test9, my ThinkPad T21 no longer suspends with APM. I had
> issues with it suspending before, I don't remember exactly what issues, but I
> know that it definitely worked in -test2. When I hit the key on my laptop to
> suspend, it will turn off the LCD and the HD will spin down, but the machine
> will not actually suspend. Here is what is printed out on the console when I
> hit the suspend key and then when I hit another key to "wake" it up:

Mine suspends okay when I close the lid, but it's never honored the
button that I know of (or button-based suspend broke too often for me
to notice it ever working).


-- wli

^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: APM Suspend Problem
  2003-11-28 21:28 ` William Lee Irwin III
@ 2003-11-28 21:50   ` Misha Nasledov
  2003-11-28 21:50     ` William Lee Irwin III
  0 siblings, 1 reply; 28+ messages in thread
From: Misha Nasledov @ 2003-11-28 21:50 UTC (permalink / raw)
  To: William Lee Irwin III; +Cc: linux-kernel

It would be really annoying if my laptop suspended when I closed the lid; I
disabled this feature in the BIOS. I will test if it suspends with this feature
enabled, but it doesn't change the fact that there is something broken with
APM. Running 'apm --suspend' doesn't work either.

On Fri, Nov 28, 2003 at 01:28:53PM -0800, William Lee Irwin III wrote:
> On Wed, Nov 26, 2003 at 10:20:57PM -0800, Misha Nasledov wrote:
> > Since about 2.6.0-test9, my ThinkPad T21 no longer suspends with APM. I had
> > issues with it suspending before, I don't remember exactly what issues, but I
> > know that it definitely worked in -test2. When I hit the key on my laptop to
> > suspend, it will turn off the LCD and the HD will spin down, but the machine
> > will not actually suspend. Here is what is printed out on the console when I
> > hit the suspend key and then when I hit another key to "wake" it up:
> 
> Mine suspends okay when I close the lid, but it's never honored the
> button that I know of (or button-based suspend broke too often for me
> to notice it ever working).

-- 
Misha Nasledov
misha@nasledov.com
http://nasledov.com/misha/

^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: APM Suspend Problem
  2003-11-28 21:50   ` Misha Nasledov
@ 2003-11-28 21:50     ` William Lee Irwin III
  2003-11-28 22:27       ` Nigel Cunningham
  0 siblings, 1 reply; 28+ messages in thread
From: William Lee Irwin III @ 2003-11-28 21:50 UTC (permalink / raw)
  To: Misha Nasledov; +Cc: linux-kernel

On Fri, Nov 28, 2003 at 01:50:08PM -0800, Misha Nasledov wrote:
> It would be really annoying if my laptop suspended when I closed the lid; I
> disabled this feature in the BIOS. I will test if it suspends with
> this feature enabled, but it doesn't change the fact that there is
> something broken with APM. Running 'apm --suspend' doesn't work either.

That sounds h0rked; we might need to drag in suspend experts for this...


-- wli

^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: APM Suspend Problem
  2003-11-28 21:50     ` William Lee Irwin III
@ 2003-11-28 22:27       ` Nigel Cunningham
  2003-11-28 22:49         ` William Lee Irwin III
  0 siblings, 1 reply; 28+ messages in thread
From: Nigel Cunningham @ 2003-11-28 22:27 UTC (permalink / raw)
  To: William Lee Irwin III; +Cc: Misha Nasledov, Linux Kernel Mailing List

Howdy.

Dunno if I'm an expert, but I might be able to help. None of the Linux
based suspends (2.4 or 2.6) will get started unless something like acpid
pushes them. If a laptop suspends without running acpid or similar, it
must be doing it from the BIOS.

Regards,

Nigel

On Sat, 2003-11-29 at 10:50, William Lee Irwin III wrote:
> On Fri, Nov 28, 2003 at 01:50:08PM -0800, Misha Nasledov wrote:
> > It would be really annoying if my laptop suspended when I closed the lid; I
> > disabled this feature in the BIOS. I will test if it suspends with
> > this feature enabled, but it doesn't change the fact that there is
> > something broken with APM. Running 'apm --suspend' doesn't work either.
> 
> That sounds h0rked; we might need to drag in suspend experts for this...
> 
> 
> -- wli
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
-- 
Nigel Cunningham
495 St Georges Road South, Hastings 4201, New Zealand

Evolution (n): A hypothetical process whereby infinitely improbable events occur 
with alarming frequency, order arises from chaos, and no one is given credit.


^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: APM Suspend Problem
  2003-11-28 22:27       ` Nigel Cunningham
@ 2003-11-28 22:49         ` William Lee Irwin III
  2003-11-29  2:17           ` Misha Nasledov
  0 siblings, 1 reply; 28+ messages in thread
From: William Lee Irwin III @ 2003-11-28 22:49 UTC (permalink / raw)
  To: Nigel Cunningham; +Cc: Misha Nasledov, Linux Kernel Mailing List

On Sat, Nov 29, 2003 at 11:27:17AM +1300, Nigel Cunningham wrote:
> Dunno if I'm an expert, but I might be able to help. None of the Linux
> based suspends (2.4 or 2.6) will get started unless something like acpid
> pushes them. If a laptop suspends without running acpid or similar, it
> must be doing it from the BIOS.

apmd is running, though I don't know if it's the one doing it.

It also seems to be dependent on CONFIG_APM.


-- wli

^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: APM Suspend Problem
  2003-11-28 22:49         ` William Lee Irwin III
@ 2003-11-29  2:17           ` Misha Nasledov
  2003-11-29  2:20             ` William Lee Irwin III
  2003-12-01 20:24             ` Pavel Machek
  0 siblings, 2 replies; 28+ messages in thread
From: Misha Nasledov @ 2003-11-29  2:17 UTC (permalink / raw)
  To: William Lee Irwin III, Nigel Cunningham, Linux Kernel Mailing List

Yeah, like I said, if I boot back into 2.4.21 it'll work just fine. I know it
worked in -test2 and -test3 but somewhere between then and -test9 it stopped
working. It might've been after -test3.. I haven't really looked into using
ACPI as APM is supposed to work perfectly on my laptop and I don't want to
complicate things.. I wish I knew more about kernel hacking so that I could
look into this problem.

On Fri, Nov 28, 2003 at 02:49:28PM -0800, William Lee Irwin III wrote:
> On Sat, Nov 29, 2003 at 11:27:17AM +1300, Nigel Cunningham wrote:
> > Dunno if I'm an expert, but I might be able to help. None of the Linux
> > based suspends (2.4 or 2.6) will get started unless something like acpid
> > pushes them. If a laptop suspends without running acpid or similar, it
> > must be doing it from the BIOS.
> 
> apmd is running, though I don't know if it's the one doing it.
> 
> It also seems to be dependent on CONFIG_APM.

-- 
Misha Nasledov
misha@nasledov.com
http://nasledov.com/misha/

^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: APM Suspend Problem
  2003-11-29  2:17           ` Misha Nasledov
@ 2003-11-29  2:20             ` William Lee Irwin III
  2003-11-29  2:35               ` Nigel Cunningham
  2003-11-29  5:38               ` Shawn Willden
  2003-12-01 20:24             ` Pavel Machek
  1 sibling, 2 replies; 28+ messages in thread
From: William Lee Irwin III @ 2003-11-29  2:20 UTC (permalink / raw)
  To: Misha Nasledov; +Cc: Nigel Cunningham, Linux Kernel Mailing List

On Fri, Nov 28, 2003 at 02:49:28PM -0800, William Lee Irwin III wrote:
>> apmd is running, though I don't know if it's the one doing it.
>> It also seems to be dependent on CONFIG_APM.

On Fri, Nov 28, 2003 at 06:17:12PM -0800, Misha Nasledov wrote:
> Yeah, like I said, if I boot back into 2.4.21 it'll work just fine. I know it
> worked in -test2 and -test3 but somewhere between then and -test9 it stopped
> working. It might've been after -test3.. I haven't really looked into using
> ACPI as APM is supposed to work perfectly on my laptop and I don't want to
> complicate things.. I wish I knew more about kernel hacking so that I could
> look into this problem.

I haven't used the CONFIG_SOFTWARE_SUSPEND needed for ACPI much; AIUI
it's still prototypical in various ways (or whatever the right way to
phrase that is), and I'm a bit too overextended to help out with it now.

There is an oddity I forgot to report: it doesn't suspend when I close
the lid if I still have the power plugged in. Also, I tried the suspend
button, and it works perfectly fine here for both suspend and resume on
a standard LTC issue Stinkpad T21, again with the power cord proviso.


-- wli

^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: APM Suspend Problem
  2003-11-29  2:20             ` William Lee Irwin III
@ 2003-11-29  2:35               ` Nigel Cunningham
  2003-11-29  5:38               ` Shawn Willden
  1 sibling, 0 replies; 28+ messages in thread
From: Nigel Cunningham @ 2003-11-29  2:35 UTC (permalink / raw)
  To: William Lee Irwin III; +Cc: Misha Nasledov, Linux Kernel Mailing List

Hi.

On Sat, 2003-11-29 at 15:20, William Lee Irwin III wrote:
> I haven't used the CONFIG_SOFTWARE_SUSPEND needed for ACPI much; AIUI
> it's still prototypical in various ways (or whatever the right way to
> phrase that is), and I'm a bit too overextended to help out with it now.

I have a ton of improvements I'm working toward sending to Patrick. It
should improve a lot shortly (assuming of course that Patrick &
Andrew/Linus take them).

Regards,

Nigel

-- 
Nigel Cunningham
495 St Georges Road South, Hastings 4201, New Zealand

Evolution (n): A hypothetical process whereby infinitely improbable events occur 
with alarming frequency, order arises from chaos, and no one is given credit.


^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: APM Suspend Problem
  2003-11-29  2:20             ` William Lee Irwin III
  2003-11-29  2:35               ` Nigel Cunningham
@ 2003-11-29  5:38               ` Shawn Willden
  2003-11-29  5:46                 ` William Lee Irwin III
  2003-11-29  7:36                 ` Misha Nasledov
  1 sibling, 2 replies; 28+ messages in thread
From: Shawn Willden @ 2003-11-29  5:38 UTC (permalink / raw)
  To: Misha Nasledov
  Cc: William Lee Irwin III, Nigel Cunningham, Linux Kernel Mailing List

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Friday 28 November 2003 07:20 pm, William Lee Irwin III wrote:
> There is an oddity I forgot to report: it doesn't suspend when I close
> the lid if I still have the power plugged in. Also, I tried the suspend
> button, and it works perfectly fine here for both suspend and resume on
> a standard LTC issue Stinkpad T21, again with the power cord proviso.

Do you also have a PCMCIA card in the slot?

I've always found that my Thinkpads (about three different models, 
currently a T21) will not suspend with power connected and a PCMCIA card 
in.  If I remove either power or my PC cards, then closing the lids will 
trigger a suspend.

I stumbled across something a while back that indicated this was a Thinkpad 
BIOS bug, but I have no idea if that is correct.

Shawn.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (GNU/Linux)

iD8DBQE/yDDKp1Ep1JptinARAgu1AJ40eoI5vtCoerCKTmiiPZ51p4wnJACfVnG4
n14zSi/w1CxearTEnUhddDk=
=LKXp
-----END PGP SIGNATURE-----

^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: APM Suspend Problem
  2003-11-29  5:38               ` Shawn Willden
@ 2003-11-29  5:46                 ` William Lee Irwin III
  2003-11-29  9:57                   ` Misha Nasledov
  2003-11-29  7:36                 ` Misha Nasledov
  1 sibling, 1 reply; 28+ messages in thread
From: William Lee Irwin III @ 2003-11-29  5:46 UTC (permalink / raw)
  To: Shawn Willden; +Cc: Misha Nasledov, Nigel Cunningham, Linux Kernel Mailing List

On Friday 28 November 2003 07:20 pm, William Lee Irwin III wrote:
>> There is an oddity I forgot to report: it doesn't suspend when I close
>> the lid if I still have the power plugged in. Also, I tried the suspend
>> button, and it works perfectly fine here for both suspend and resume on
>> a standard LTC issue Stinkpad T21, again with the power cord proviso.

On Fri, Nov 28, 2003 at 10:38:18PM -0700, Shawn Willden wrote:
> Do you also have a PCMCIA card in the slot?
> I've always found that my Thinkpads (about three different models, 
> currently a T21) will not suspend with power connected and a PCMCIA card 
> in.  If I remove either power or my PC cards, then closing the lids will 
> trigger a suspend.
> I stumbled across something a while back that indicated this was a Thinkpad 
> BIOS bug, but I have no idea if that is correct.

No, I rarely have PCMCIA cards in. Just the power cord being plugged in
is enough to break it here.


-- wli

^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: APM Suspend Problem
  2003-11-29  5:38               ` Shawn Willden
  2003-11-29  5:46                 ` William Lee Irwin III
@ 2003-11-29  7:36                 ` Misha Nasledov
  1 sibling, 0 replies; 28+ messages in thread
From: Misha Nasledov @ 2003-11-29  7:36 UTC (permalink / raw)
  To: Shawn Willden
  Cc: William Lee Irwin III, Nigel Cunningham, Linux Kernel Mailing List

Strange. My laptop always suspended just fine with any number of PCMCIA cards
in it and even with the power cord plugged in. Now that you mention it, though,
I don't think I've tried suspending it unplugged; I will try this as soon as
possible, but I think the laptop should suspend without the power cord
proviso..

On Fri, Nov 28, 2003 at 10:38:18PM -0700, Shawn Willden wrote:
> On Friday 28 November 2003 07:20 pm, William Lee Irwin III wrote:
> > There is an oddity I forgot to report: it doesn't suspend when I close
> > the lid if I still have the power plugged in. Also, I tried the suspend
> > button, and it works perfectly fine here for both suspend and resume on
> > a standard LTC issue Stinkpad T21, again with the power cord proviso.
> 
> Do you also have a PCMCIA card in the slot?
> 
> I've always found that my Thinkpads (about three different models, 
> currently a T21) will not suspend with power connected and a PCMCIA card 
> in.  If I remove either power or my PC cards, then closing the lids will 
> trigger a suspend.
> 
> I stumbled across something a while back that indicated this was a Thinkpad 
> BIOS bug, but I have no idea if that is correct.

-- 
Misha Nasledov
misha@nasledov.com
http://nasledov.com/misha/

^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: APM Suspend Problem
  2003-11-29  5:46                 ` William Lee Irwin III
@ 2003-11-29  9:57                   ` Misha Nasledov
  0 siblings, 0 replies; 28+ messages in thread
From: Misha Nasledov @ 2003-11-29  9:57 UTC (permalink / raw)
  To: William Lee Irwin III; +Cc: linux-kernel

My laptop suspends just fine now even with PCMCIA cards plugged in, as long
as the power cord is not plugged in as well .. It's great to finally be able
to use 2.6 on my laptop once again!

On Fri, Nov 28, 2003 at 09:46:35PM -0800, William Lee Irwin III wrote:
> On Friday 28 November 2003 07:20 pm, William Lee Irwin III wrote:
> >> There is an oddity I forgot to report: it doesn't suspend when I close
> >> the lid if I still have the power plugged in. Also, I tried the suspend
> >> button, and it works perfectly fine here for both suspend and resume on
> >> a standard LTC issue Stinkpad T21, again with the power cord proviso.
> 
> On Fri, Nov 28, 2003 at 10:38:18PM -0700, Shawn Willden wrote:
> > Do you also have a PCMCIA card in the slot?
> > I've always found that my Thinkpads (about three different models, 
> > currently a T21) will not suspend with power connected and a PCMCIA card 
> > in.  If I remove either power or my PC cards, then closing the lids will 
> > trigger a suspend.
> > I stumbled across something a while back that indicated this was a Thinkpad 
> > BIOS bug, but I have no idea if that is correct.
> 
> No, I rarely have PCMCIA cards in. Just the power cord being plugged in
> is enough to break it here.

-- 
Misha Nasledov
misha@nasledov.com
http://nasledov.com/misha/

^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: APM Suspend Problem
  2003-11-29  2:17           ` Misha Nasledov
  2003-11-29  2:20             ` William Lee Irwin III
@ 2003-12-01 20:24             ` Pavel Machek
  1 sibling, 0 replies; 28+ messages in thread
From: Pavel Machek @ 2003-12-01 20:24 UTC (permalink / raw)
  To: Misha Nasledov
  Cc: William Lee Irwin III, Nigel Cunningham, Linux Kernel Mailing List

Hi!

> Yeah, like I said, if I boot back into 2.4.21 it'll work just fine. I know it
> worked in -test2 and -test3 but somewhere between then and -test9 it stopped
> working. It might've been after -test3.. I haven't really looked into using
> ACPI as APM is supposed to work perfectly on my laptop and I don't want to
> complicate things.. I wish I knew more about kernel hacking so that I could
> look into this problem.

You are hitting problems in driver model... You might want to disable
calls to new driver model and see if it helps, but ultimately we want
to stop devices for APM, too.
								Pavel
-- 
When do you have a heart between your knees?
[Johanka's followup: and *two* hearts?]

^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: APM Suspend Problem
  2003-11-27  6:20 APM Suspend Problem Misha Nasledov
                   ` (2 preceding siblings ...)
  2003-11-28 21:28 ` William Lee Irwin III
@ 2003-12-02 21:44 ` john stultz
  3 siblings, 0 replies; 28+ messages in thread
From: john stultz @ 2003-12-02 21:44 UTC (permalink / raw)
  To: lkml

On Wed, 2003-11-26 at 22:20, Misha Nasledov wrote:
> Since about 2.6.0-test9, my ThinkPad T21 no longer suspends with APM. I had

Just wanted to add a "me too" to this. 

I too am having trouble w/ APM suspend/resume with 2.6.0-testX on my TP
T20. I've narrowed it down to the 3c59x PCMCIA card I'm using. If the
card is present in the system when it suspends, the system will not
properly resume (disk fails to spin up all the way). Without the 3c59x
card, the system will suspend and resume properly. 2.4 works like a
charm. 

config and dmesg can be found in osdl bug #1569.

http://bugme.osdl.org/show_bug.cgi?id=1569

thanks
-john



^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: APM Suspend Problem
       [not found]     ` <15Eea-Id-21@gated-at.bofh.it>
@ 2003-12-25 19:17       ` Michael Schierl
  0 siblings, 0 replies; 28+ messages in thread
From: Michael Schierl @ 2003-12-25 19:17 UTC (permalink / raw)
  To: linux-kernel; +Cc: mochel

[-- Attachment #1: Type: text/plain, Size: 1967 bytes --]

On Mon, 22 Dec 2003 20:50:14 +0100, in linux.kernel you wrote:

>I upgraded to 2.6.0 release but APM + yenta_socket still won't coexist 
>(ie. Thinkpad T20 won't suspend with both)

I upgraded to 2.6.0 as well, and now my "minimalist" config suspends,
but does not resume afterwards . (My usual config does not even
suspend - I'll try to track down which driver does the difference in
the next days).

Okay, current situation: 

My laptop (Acer Travelmate 210TEV), and two kernels, one -test3 and
one final release.

Nearly the same (minimalist) config files (one is generated by make
oldconfig from the other) - it does have no keyboard, no mouse, no
nothing. The only things i did not get out are IDE and ext2 (.configs
are below)

A small script called /apmtest:

#!/bin/bash
mount /proc
echo "Testing APM..."
sleep 3
apm -s
echo "Done."
sleep 1
echo "."
exec sulogin

Running both kernels with init=/apmtest (root is mounted read-only).

test3 kernel suspends properly, and when i wake it up again (by
tapping the power switch, since there is no keyboard driver in¹), it
wakes up and shows me a login prompt (with a keyboard driver added it
lets me log in as root as well). [This does not surprise me; test3
kernel's suspend always works as expected...].

final kernel suspends properly (printing out things like "hd[ac]: PM
request completed: suspend". When I try to resume it, it prints
messages "hd[ac]: PM request completed: resume", then prints "Done."
from the script above and hangs (No "." is printed, no sulogin prompt
shown).

Any ideas how to help tracking that down?

Michael

¹ when I add a keyboard driver, i get exactly the same situation when
waking it up by typing a key
-- 
"New" PGP Key! User ID: Michael Schierl <schierlm@gmx.de>
Key ID: 0x58B48CDD    Size: 2048    Created: 26.03.2002
Fingerprint:  68CE B807 E315 D14B  7461 5539 C90F 7CC8
http://home.arcor.de/mschierlm/mschierlm.asc

[-- Attachment #2: .config-minimal-test3 --]
[-- Type: text/plain, Size: 8127 bytes --]

#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y

#
# General setup
#
# CONFIG_SWAP is not set
# CONFIG_SYSVIPC is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_SYSCTL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EMBEDDED=y
# CONFIG_KALLSYMS is not set
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set

#
# Loadable module support
#
# CONFIG_MODULES is not set

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
CONFIG_MPENTIUMIII=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_X86_UP_APIC is not set
CONFIG_X86_TSC=y
# CONFIG_X86_MCE is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_MTRR is not set

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y

#
# ACPI Support
#
# CONFIG_ACPI is not set
CONFIG_APM=y
CONFIG_APM_IGNORE_USER_SUSPEND=y
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
# CONFIG_PCI is not set
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_HOTPLUG is not set

#
# Executable file formats
#
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set

#
# Generic Driver Options
#
# CONFIG_FW_LOADER is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play support
#
# CONFIG_PNP is not set

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set

#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
# CONFIG_SCSI is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#

#
# I2O device support
#

#
# Networking support
#
# CONFIG_NET is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# ISDN subsystem
#

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
# CONFIG_SERIO is not set

#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set

#
# Non-8250 serial port support
#
# CONFIG_UNIX98_PTYS is not set

#
# I2C support
#
# CONFIG_I2C is not set

#
# I2C Hardware Sensors Mainboard support
#

#
# I2C Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set

#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
# CONFIG_FAT_FS is not set
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_TMPFS is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y

#
# Sound
#
# CONFIG_SOUND is not set

#
# USB support
#
# CONFIG_USB_GADGET is not set

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_IOVIRT=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_PAGEALLOC=y
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_FRAME_POINTER=y

#
# Security options
#
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
# CONFIG_CRYPTO is not set

#
# Library routines
#
# CONFIG_CRC32 is not set
CONFIG_X86_BIOS_REBOOT=y

[-- Attachment #3: .config-minimal-final --]
[-- Type: text/plain, Size: 8582 bytes --]

#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
# CONFIG_STANDALONE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y

#
# General setup
#
# CONFIG_SWAP is not set
# CONFIG_SYSVIPC is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_SYSCTL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
# CONFIG_KALLSYMS is not set
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set

#
# Loadable module support
#
# CONFIG_MODULES is not set

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
CONFIG_MPENTIUMIII=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_HPET_TIMER is not set
# CONFIG_HPET_EMULATE_RTC is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_X86_UP_APIC is not set
CONFIG_X86_TSC=y
# CONFIG_X86_MCE is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_MTRR is not set

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y

#
# ACPI (Advanced Configuration and Power Interface) Support
#
# CONFIG_ACPI is not set

#
# APM (Advanced Power Management) BIOS Support
#
CONFIG_APM=y
CONFIG_APM_IGNORE_USER_SUSPEND=y
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
# CONFIG_PCI is not set
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_HOTPLUG is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set

#
# Device Drivers
#

#
# Generic Driver Options
#

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play support
#
# CONFIG_PNP is not set

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set

#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
# CONFIG_SCSI is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#

#
# I2O device support
#

#
# Networking support
#
# CONFIG_NET is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# ISDN subsystem
#

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
# CONFIG_SERIO is not set
# CONFIG_SERIO_I8042 is not set

#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set

#
# Non-8250 serial port support
#
# CONFIG_UNIX98_PTYS is not set

#
# I2C support
#
# CONFIG_I2C is not set

#
# I2C Algorithms
#

#
# I2C Hardware Bus support
#

#
# I2C Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set

#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#

#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y

#
# Sound
#
# CONFIG_SOUND is not set

#
# USB support
#
# CONFIG_USB_GADGET is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
# CONFIG_FAT_FS is not set
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_IOVIRT=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_PAGEALLOC=y
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_FRAME_POINTER=y

#
# Security options
#
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
# CONFIG_CRYPTO is not set

#
# Library routines
#
# CONFIG_CRC32 is not set
CONFIG_X86_BIOS_REBOOT=y

^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: APM Suspend Problem
  2003-12-06 21:46         ` pZa1x
@ 2003-12-07 17:06           ` Russell King
  0 siblings, 0 replies; 28+ messages in thread
From: Russell King @ 2003-12-07 17:06 UTC (permalink / raw)
  To: pZa1x; +Cc: linux-kernel

On Sat, Dec 06, 2003 at 09:46:28PM +0000, pZa1x wrote:
> Please let me know if there's anything I can do to help.
> 
> Russell King wrote:
> > On Sat, Nov 29, 2003 at 11:26:47AM +0000, pZa1x wrote:
> > 
> >>(a) with yenta kernel 2.6
> >>(b) without yenta kernel 2.6
> > 
> > 
> > Ok, so there aren't any differences between the PCI config space with
> > the module loaded and unloaded.  I guess we need to start looking at
> > the devices memory space registers for differences.
> > 
> > (This will require a little more work, so there'll be a slight delay.)
> > 

Ok, if all goes well, you should be able to use the following program:

  http://pcmcia.arm.linux.org.uk/progs/cbdump.c

to dump out many of the cardbus controllers registers.  The idea is the
same with lspci - you need to dump out the registers (in order):

- without the module having been loaded since last boot
- after the module has been loaded and cardmgr started
- after a suspend attempt with the module loaded
- cardctl suspend
- cardctl resume
- cardctl eject, cardmgr stopped and the module removed
- suspend while module unloaded, then resume

This means you should end up with seven register dumps.  Please send me
all these, with each clearly marked as to which is which.

If you have other scenarios (eg, suspend works with module loaded but
no card in the socket) then dumping this as well would be useful.
However, please document exactly what you did in this case.

This is probably going to seem like using a sledge hammer to crack a
peanut...  but we know that the BIOS isn't happy about /something/
we're doing, we just need to work out what.

Thanks.

-- 
Russell King
 Linux kernel    2.6 ARM Linux   - http://www.arm.linux.org.uk/
 maintainer of:  2.6 PCMCIA      - http://pcmcia.arm.linux.org.uk/
                 2.6 Serial core

^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: APM Suspend Problem
  2003-12-01 21:07       ` Russell King
@ 2003-12-06 21:46         ` pZa1x
  2003-12-07 17:06           ` Russell King
  0 siblings, 1 reply; 28+ messages in thread
From: pZa1x @ 2003-12-06 21:46 UTC (permalink / raw)
  To: Russell King; +Cc: linux-kernel

Please let me know if there's anything I can do to help.

Russell King wrote:
> On Sat, Nov 29, 2003 at 11:26:47AM +0000, pZa1x wrote:
> 
>>(a) with yenta kernel 2.6
>>(b) without yenta kernel 2.6
> 
> 
> Ok, so there aren't any differences between the PCI config space with
> the module loaded and unloaded.  I guess we need to start looking at
> the devices memory space registers for differences.
> 
> (This will require a little more work, so there'll be a slight delay.)
> 



^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: APM Suspend Problem
  2003-11-29 11:26     ` pZa1x
@ 2003-12-01 21:07       ` Russell King
  2003-12-06 21:46         ` pZa1x
  0 siblings, 1 reply; 28+ messages in thread
From: Russell King @ 2003-12-01 21:07 UTC (permalink / raw)
  To: pZa1x; +Cc: linux-kernel

On Sat, Nov 29, 2003 at 11:26:47AM +0000, pZa1x wrote:
> (a) with yenta kernel 2.6
> (b) without yenta kernel 2.6

Ok, so there aren't any differences between the PCI config space with
the module loaded and unloaded.  I guess we need to start looking at
the devices memory space registers for differences.

(This will require a little more work, so there'll be a slight delay.)

-- 
Russell King
 Linux kernel    2.6 ARM Linux   - http://www.arm.linux.org.uk/
 maintainer of:  2.6 PCMCIA      - http://pcmcia.arm.linux.org.uk/
                 2.6 Serial core

^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: APM Suspend Problem
  2003-11-29  8:22   ` Russell King
@ 2003-11-29 11:26     ` pZa1x
  2003-12-01 21:07       ` Russell King
  0 siblings, 1 reply; 28+ messages in thread
From: pZa1x @ 2003-11-29 11:26 UTC (permalink / raw)
  To: Russell King; +Cc: linux-kernel

Russell King wrote:
> On Sat, Nov 29, 2003 at 01:14:11AM +0000, pZa1x wrote:
> 
>>A follow-up
>>
>>by shutting down PCMCIA and rmmod'ing all the related modules ie ide_cs, 
>>ds, yenta_socket, pcmcia_core the suspend works on AC again.
>>
>>So, I add them back one by one:
>>pcmcia_core -> still works
>>yenta_socket -> FAILS!
>>rmmod yenta_socket -> works again!
>>
>>Summary: suspend works on my Thinkpad T21
>>(a) with no apm module or apmd but with all PCMCIA (ie. hardware 
>>suspend- close lid etc);
>>(b) with apm & apmd and all PCMCIA but no AC power
>>(c) with apm & apmd but no yenta_socket and the rest but with AC power
>>
>>The problem is a combination of apm, yenta_socket and AC power.
> 
> 
> The output of:
> 
> lspci -vvxxxx
> 
> both with and without yenta_socket inserted would be a useful starting
> point.
> 

Find below:

(a) with yenta kernel 2.6
(b) without yenta kernel 2.6

And for comparison with 2.4.20 which works in any case

(c) with yenta kernel 2.4.20
(d) without yenta kernel 2.4.20


********************************************************************
WITH YENTA KERNEL 2.6
********************************************************************

00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge 
(rev 03)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ >SERR- <PERR+
	Latency: 64
	Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
	Capabilities: [a0] AGP version 1.0
		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- 
FW- AGP3- Rate=x1,x2
		Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
00: 86 80 90 71 06 01 10 a2 03 00 00 06 00 40 00 00
10: 08 00 00 f8 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 0c 82 00 ff 00 00 00 09 03 10 11 11 00 00 11 11
60: 08 10 10 18 20 20 20 20 00 00 00 00 00 aa 00 00
70: 20 1f 0a 38 45 01 03 01 27 1b 9c 00 10 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 04 61 00 00 00 05 00 00 00 00 00 00
a0: 02 00 10 00 03 02 00 1f 00 00 00 00 00 00 00 00
b0: 80 20 00 00 30 00 00 00 00 00 35 01 20 10 00 00
c0: 00 00 00 00 00 00 00 00 18 0c 83 cd 78 00 00 00
d0: 00 00 00 00 00 00 00 00 0c 00 00 00 00 00 00 00
e0: 4c ad ff bb 8a 3e 00 80 2c d3 f7 cf 9d 3e 00 00
f0: 40 01 00 00 00 f8 00 60 20 0f 00 00 00 00 00 00

00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge 
(rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 128
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	Memory behind bridge: f0000000-f7ffffff
	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B+
00: 86 80 91 71 1f 00 20 02 03 00 04 06 00 80 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 40 f0 00 a0 22
20: 00 f0 f0 f7 f0 ff 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 8c 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:02.0 CardBus bridge: Texas Instruments PCI1450 (rev 03)
	Subsystem: IBM: Unknown device 0130
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 168, cache line size 08
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at 50000000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
	Memory window 0: 10000000-103ff000 (prefetchable)
	Memory window 1: 10400000-107ff000
	I/O window 0: 00004000-000040ff
	I/O window 1: 00004400-000044ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001
00: 4c 10 1b ac 07 00 10 02 03 00 07 06 08 a8 82 00
10: 00 00 00 50 a0 00 00 02 00 02 05 b0 00 00 00 10
20: 00 f0 3f 10 00 00 40 10 00 f0 7f 10 00 40 00 00
30: fc 40 00 00 00 44 00 00 fc 44 00 00 0b 01 c0 05
40: 14 10 30 01 01 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 78 d0 44 08 80 00 00 00 80 80 01 80 00 10 00 00
90: c0 82 66 40 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 00 11 fe 00 00 c0 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:02.1 CardBus bridge: Texas Instruments PCI1450 (rev 03)
	Subsystem: IBM: Unknown device 0130
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 168, cache line size 08
	Interrupt: pin B routed to IRQ 11
	Region 0: Memory at 50100000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
	Memory window 0: 10800000-10bff000 (prefetchable)
	Memory window 1: 10c00000-10fff000
	I/O window 0: 00004800-000048ff
	I/O window 1: 00004c00-00004cff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001
00: 4c 10 1b ac 07 00 10 02 03 00 07 06 08 a8 82 00
10: 00 00 10 50 a0 00 00 02 00 06 09 b0 00 00 80 10
20: 00 f0 bf 10 00 00 c0 10 00 f0 ff 10 00 48 00 00
30: fc 48 00 00 00 4c 00 00 fc 4c 00 00 0b 02 c0 05
40: 14 10 30 01 01 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 78 d0 44 08 80 00 00 00 80 80 01 80 00 10 00 00
90: c0 82 66 40 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 00 11 fe 00 00 c0 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:03.0 Ethernet controller: 3Com Corporation 3c556B Hurricane CardBus 
(rev 20)
	Subsystem: 3Com Corporation: Unknown device 6356
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 80 (2500ns min, 2500ns max), cache line size 08
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at 1800 [size=256]
	Region 1: Memory at e8101400 (32-bit, non-prefetchable) [size=128]
	Region 2: Memory at e8101000 (32-bit, non-prefetchable) [size=128]
	Expansion ROM at <unassigned> [disabled] [size=128K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D3 PME-Enable+ DSel=0 DScale=2 PME-
00: b7 10 56 60 17 00 10 02 20 00 00 02 08 50 80 00
10: 01 18 00 00 00 14 10 e8 00 10 10 e8 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 b7 10 56 63
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 0a 0a
40: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00
50: 01 00 02 fe 03 41 00 29 00 00 00 00 00 00 00 00
60: 00 00 46 86 49 a5 56 60 61 00 09 00 00 00 50 6d
70: 70 29 09 00 00 00 46 86 49 a5 10 00 00 00 aa 00
80: a6 32 00 00 00 00 00 00 00 00 00 00 29 04 30 00
90: 00 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:03.1 Communication controller: 3Com Corporation Mini PCI 56k Winmodem 
(rev 20)
	Subsystem: 3Com Corporation: Unknown device 6159
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at 2000 [size=256]
	Region 1: Memory at e8101c00 (32-bit, non-prefetchable) [size=256]
	Region 2: Memory at e8101800 (32-bit, non-prefetchable) [size=128]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0+,D1-,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-
00: b7 10 07 10 13 00 10 02 20 00 80 07 08 50 00 00
10: 01 20 00 00 00 1c 10 e8 00 18 10 e8 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 b7 10 59 61
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 0a 0a
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 00 12 ec 00 40 00 08 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:05.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24 
[CrystalClear SoundFusion Audio Accelerator] (rev 01)
	Subsystem: IBM: Unknown device 0153
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
	Latency: 64 (1000ns min, 6000ns max)
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at e8100000 (32-bit, non-prefetchable) [size=4K]
	Region 1: Memory at e8000000 (32-bit, non-prefetchable) [size=1M]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 13 10 03 60 06 00 10 04 01 00 01 04 00 40 00 00
10: 00 00 10 e8 00 00 00 e8 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 53 01
30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 04 18
40: 01 00 22 06 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:07.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
00: 86 80 10 71 0f 00 80 02 02 00 80 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 4d 00 f3 04
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 0b 0b 0b 0b 92 00 00 00 00 f2 00 00 00 00 00 00
70: 00 00 00 00 00 00 0c 0c 00 00 00 00 00 00 00 00
80: 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 07 81 11 10 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 25 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 30 0f 00 00 00 00 00 00

00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) 
(prog-if 80 [Master])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 64
	Region 4: I/O ports at 1c00 [size=16]
00: 86 80 11 71 05 00 80 02 01 80 01 01 00 40 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 1c 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 07 a3 07 a3 00 00 00 00 05 00 02 02 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 30 0f 00 00 00 00 00 00

00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) 
(prog-if 00 [UHCI])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 64
	Interrupt: pin D routed to IRQ 11
	Region 4: I/O ports at 1c20 [size=32]
00: 86 80 12 71 05 00 80 02 01 00 03 0c 00 40 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 21 1c 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 04 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 30 0f 00 00 00 00 00 00

00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 03)
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin ? routed to IRQ 9
00: 86 80 13 71 03 00 80 02 03 00 80 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 01 10 00 00 0f ff bf 10 e1 30 00 00 80 00 10 00
50: 03 50 1d 00 e0 c9 7f 06 37 80 00 02 00 00 00 80
60: 00 00 00 60 e8 15 e7 08 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 f0 03 17 00 2e 00 11 00
80: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 41 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 30 0f 00 00 00 00 00 00

01:00.0 VGA compatible controller: S3 Inc. 86C270-294 Savage/IX-MV (rev 
11) (prog-if 00 [VGA])
	Subsystem: IBM ThinkPad T20
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (1000ns min, 63750ns max), cache line size 08
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=128M]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [80] AGP version 1.0
		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- 
FW- AGP3- Rate=x1,x2
		Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
00: 33 53 12 8c 07 00 30 02 11 00 00 03 08 40 00 00
10: 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 7f 01
30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 04 ff
40: 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 02 00 10 00 03 02 00 1f 00 00 00 00 40 02 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 80 21 06
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00




********************************************************************
WITH NO YENTA KERNEL 2.6
********************************************************************


00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge 
(rev 03)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ >SERR- <PERR+
	Latency: 64
	Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
	Capabilities: [a0] AGP version 1.0
		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- 
FW- AGP3- Rate=x1,x2
		Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
00: 86 80 90 71 06 01 10 a2 03 00 00 06 00 40 00 00
10: 08 00 00 f8 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 0c 82 00 ff 00 00 00 09 03 10 11 11 00 00 11 11
60: 08 10 10 18 20 20 20 20 00 00 00 00 00 aa 00 00
70: 20 1f 0a 38 45 01 03 01 27 1b 9c 00 10 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 04 61 00 00 00 05 00 00 00 00 00 00
a0: 02 00 10 00 03 02 00 1f 00 00 00 00 00 00 00 00
b0: 80 20 00 00 30 00 00 00 00 00 35 01 20 10 00 00
c0: 00 00 00 00 00 00 00 00 18 0c 83 cd 78 00 00 00
d0: 00 00 00 00 00 00 00 00 0c 00 00 00 00 00 00 00
e0: 4c ad ff bb 8a 3e 00 80 2c d3 f7 cf 9d 3e 00 00
f0: 40 01 00 00 00 f8 00 60 20 0f 00 00 00 00 00 00

00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge 
(rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 128
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	Memory behind bridge: f0000000-f7ffffff
	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B+
00: 86 80 91 71 1f 00 20 02 03 00 04 06 00 80 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 40 f0 00 a0 22
20: 00 f0 f0 f7 f0 ff 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 8c 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:02.0 CardBus bridge: Texas Instruments PCI1450 (rev 03)
	Subsystem: IBM: Unknown device 0130
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 168, cache line size 08
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at 50000000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
	Memory window 0: 10000000-103ff000 (prefetchable)
	Memory window 1: 10400000-107ff000
	I/O window 0: 00004000-000040ff
	I/O window 1: 00004400-000044ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001
00: 4c 10 1b ac 07 00 10 02 03 00 07 06 08 a8 82 00
10: 00 00 00 50 a0 00 00 02 00 02 05 b0 00 00 00 10
20: 00 f0 3f 10 00 00 40 10 00 f0 7f 10 00 40 00 00
30: fc 40 00 00 00 44 00 00 fc 44 00 00 0b 01 c0 05
40: 14 10 30 01 01 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 78 d0 44 08 80 00 00 00 80 80 01 80 00 10 00 00
90: c0 82 66 40 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 00 11 fe 00 00 c0 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:02.1 CardBus bridge: Texas Instruments PCI1450 (rev 03)
	Subsystem: IBM: Unknown device 0130
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 168, cache line size 08
	Interrupt: pin B routed to IRQ 11
	Region 0: Memory at 50100000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
	Memory window 0: 10800000-10bff000 (prefetchable)
	Memory window 1: 10c00000-10fff000
	I/O window 0: 00004800-000048ff
	I/O window 1: 00004c00-00004cff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001
00: 4c 10 1b ac 07 00 10 02 03 00 07 06 08 a8 82 00
10: 00 00 10 50 a0 00 00 02 00 06 09 b0 00 00 80 10
20: 00 f0 bf 10 00 00 c0 10 00 f0 ff 10 00 48 00 00
30: fc 48 00 00 00 4c 00 00 fc 4c 00 00 0b 02 c0 05
40: 14 10 30 01 01 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 78 d0 44 08 80 00 00 00 80 80 01 80 00 10 00 00
90: c0 82 66 40 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 00 11 fe 00 00 c0 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:03.0 Ethernet controller: 3Com Corporation 3c556B Hurricane CardBus 
(rev 20)
	Subsystem: 3Com Corporation: Unknown device 6356
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 80 (2500ns min, 2500ns max), cache line size 08
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at 1800 [size=256]
	Region 1: Memory at e8101400 (32-bit, non-prefetchable) [size=128]
	Region 2: Memory at e8101000 (32-bit, non-prefetchable) [size=128]
	Expansion ROM at <unassigned> [disabled] [size=128K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D3 PME-Enable+ DSel=0 DScale=2 PME-
00: b7 10 56 60 17 00 10 02 20 00 00 02 08 50 80 00
10: 01 18 00 00 00 14 10 e8 00 10 10 e8 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 b7 10 56 63
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 0a 0a
40: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00
50: 01 00 02 fe 03 41 00 29 00 00 00 00 00 00 00 00
60: 00 00 46 86 49 a5 56 60 61 00 09 00 00 00 50 6d
70: 70 29 09 00 00 00 46 86 49 a5 10 00 00 00 aa 00
80: a6 32 00 00 00 00 00 00 00 00 00 00 29 04 30 00
90: 00 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:03.1 Communication controller: 3Com Corporation Mini PCI 56k Winmodem 
(rev 20)
	Subsystem: 3Com Corporation: Unknown device 6159
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at 2000 [size=256]
	Region 1: Memory at e8101c00 (32-bit, non-prefetchable) [size=256]
	Region 2: Memory at e8101800 (32-bit, non-prefetchable) [size=128]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0+,D1-,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-
00: b7 10 07 10 13 00 10 02 20 00 80 07 08 50 00 00
10: 01 20 00 00 00 1c 10 e8 00 18 10 e8 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 b7 10 59 61
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 0a 0a
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 00 12 ec 00 40 00 08 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:05.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24 
[CrystalClear SoundFusion Audio Accelerator] (rev 01)
	Subsystem: IBM: Unknown device 0153
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
	Latency: 64 (1000ns min, 6000ns max)
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at e8100000 (32-bit, non-prefetchable) [size=4K]
	Region 1: Memory at e8000000 (32-bit, non-prefetchable) [size=1M]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 13 10 03 60 06 00 10 04 01 00 01 04 00 40 00 00
10: 00 00 10 e8 00 00 00 e8 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 53 01
30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 04 18
40: 01 00 22 06 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:07.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
00: 86 80 10 71 0f 00 80 02 02 00 80 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 4d 00 f3 04
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 0b 0b 0b 0b 92 00 00 00 00 f2 00 00 00 00 00 00
70: 00 00 00 00 00 00 0c 0c 00 00 00 00 00 00 00 00
80: 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 07 81 11 10 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 25 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 30 0f 00 00 00 00 00 00

00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) 
(prog-if 80 [Master])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 64
	Region 4: I/O ports at 1c00 [size=16]
00: 86 80 11 71 05 00 80 02 01 80 01 01 00 40 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 1c 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 07 a3 07 a3 00 00 00 00 05 00 02 02 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 30 0f 00 00 00 00 00 00

00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) 
(prog-if 00 [UHCI])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 64
	Interrupt: pin D routed to IRQ 11
	Region 4: I/O ports at 1c20 [size=32]
00: 86 80 12 71 05 00 80 02 01 00 03 0c 00 40 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 21 1c 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 04 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 30 0f 00 00 00 00 00 00

00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 03)
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin ? routed to IRQ 9
00: 86 80 13 71 03 00 80 02 03 00 80 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 01 10 00 00 0f ff bf 10 e1 30 00 00 80 00 10 00
50: 03 50 1d 00 e0 c9 7f 06 37 80 00 02 00 00 00 80
60: 00 00 00 60 e8 15 e7 08 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 f0 03 17 00 2e 00 11 00
80: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 41 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 30 0f 00 00 00 00 00 00

01:00.0 VGA compatible controller: S3 Inc. 86C270-294 Savage/IX-MV (rev 
11) (prog-if 00 [VGA])
	Subsystem: IBM ThinkPad T20
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (1000ns min, 63750ns max), cache line size 08
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=128M]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [80] AGP version 1.0
		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- 
FW- AGP3- Rate=x1,x2
		Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
00: 33 53 12 8c 07 00 30 02 11 00 00 03 08 40 00 00
10: 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 7f 01
30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 04 ff
40: 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 02 00 10 00 03 02 00 1f 00 00 00 00 40 02 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 80 21 06
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00







********************************************************************
WITH YENTA KERNEL 2.4.20
********************************************************************
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge 
(rev 03)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ >SERR- <PERR-
	Latency: 64
	Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
	Capabilities: [a0] AGP version 1.0
		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- 
FW- AGP3- Rate=x1,x2
		Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
00: 86 80 90 71 06 01 10 22 03 00 00 06 00 40 00 00
10: 08 00 00 f8 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 0c 82 00 ff 00 00 00 09 03 10 11 11 00 00 11 11
60: 08 10 10 18 20 20 20 20 00 00 00 00 00 aa 00 00
70: 20 1f 0a 38 45 01 03 01 27 1b 9c 00 10 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 04 61 00 00 00 05 00 00 00 00 00 00
a0: 02 00 10 00 03 02 00 1f 00 00 00 00 00 00 00 00
b0: 80 20 00 00 30 00 00 00 00 00 35 01 20 10 00 00
c0: 00 00 00 00 00 00 00 00 18 0c 83 cd 78 00 00 00
d0: 00 00 00 00 00 00 00 00 0c 00 00 00 00 00 00 00
e0: 4c ad ff bb 8a 3e 00 80 2c d3 f7 cf 9d 3e 00 00
f0: 40 01 00 00 00 f8 00 60 20 0f 00 00 00 00 00 00

00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge 
(rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 128
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	Memory behind bridge: f0000000-f7ffffff
	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B+
00: 86 80 91 71 1f 00 20 02 03 00 04 06 00 80 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 40 f0 00 a0 22
20: 00 f0 f0 f7 f0 ff 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 8c 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:02.0 CardBus bridge: Texas Instruments PCI1450 (rev 03)
	Subsystem: IBM: Unknown device 0130
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 168, cache line size 08
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at 50000000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=00, secondary=02, subordinate=04, sec-latency=176
	Memory window 0: 10000000-103ff000 (prefetchable)
	Memory window 1: 10400000-107ff000
	I/O window 0: 00004000-000040ff
	I/O window 1: 00004400-000044ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001
00: 4c 10 1b ac 07 00 10 02 03 00 07 06 08 a8 82 00
10: 00 00 00 50 a0 00 00 02 00 02 04 b0 00 00 00 10
20: 00 f0 3f 10 00 00 40 10 00 f0 7f 10 00 40 00 00
30: fc 40 00 00 00 44 00 00 fc 44 00 00 0b 01 c0 05
40: 14 10 30 01 01 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 78 d0 44 08 00 00 00 00 80 80 01 80 00 10 00 00
90: c0 82 66 40 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 00 11 fe 00 00 c0 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:02.1 CardBus bridge: Texas Instruments PCI1450 (rev 03)
	Subsystem: IBM: Unknown device 0130
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 168, cache line size 08
	Interrupt: pin B routed to IRQ 11
	Region 0: Memory at 50100000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=00, secondary=05, subordinate=07, sec-latency=176
	Memory window 0: 10800000-10bff000 (prefetchable)
	Memory window 1: 10c00000-10fff000
	I/O window 0: 00004800-000048ff
	I/O window 1: 00004c00-00004cff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001
00: 4c 10 1b ac 07 00 10 02 03 00 07 06 08 a8 82 00
10: 00 00 10 50 a0 00 00 02 00 05 07 b0 00 00 80 10
20: 00 f0 bf 10 00 00 c0 10 00 f0 ff 10 00 48 00 00
30: fc 48 00 00 00 4c 00 00 fc 4c 00 00 0b 02 c0 05
40: 14 10 30 01 01 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 78 d0 44 08 00 00 00 00 80 80 01 80 00 10 00 00
90: c0 82 66 40 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 00 11 fe 00 00 c0 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:03.0 Ethernet controller: 3Com Corporation 3c556B Hurricane CardBus 
(rev 20)
	Subsystem: 3Com Corporation: Unknown device 6356
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 80 (2500ns min, 2500ns max), cache line size 08
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at 1800 [size=256]
	Region 1: Memory at e8101400 (32-bit, non-prefetchable) [size=128]
	Region 2: Memory at e8101000 (32-bit, non-prefetchable) [size=128]
	Expansion ROM at <unassigned> [disabled] [size=128K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-
00: b7 10 56 60 17 00 10 02 20 00 00 02 08 50 80 00
10: 01 18 00 00 00 14 10 e8 00 10 10 e8 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 b7 10 56 63
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 0a 0a
40: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00
50: 01 00 02 fe 00 40 00 29 00 00 00 00 00 00 00 00
60: 00 00 46 86 49 a5 56 60 61 00 09 00 00 00 50 6d
70: 70 29 09 00 00 00 46 86 49 a5 10 00 00 00 aa 00
80: a6 32 00 00 00 00 00 00 00 00 00 00 29 04 30 00
90: 00 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:03.1 Communication controller: 3Com Corporation Mini PCI 56k Winmodem 
(rev 20)
	Subsystem: 3Com Corporation: Unknown device 6159
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at 2000 [size=256]
	Region 1: Memory at e8101c00 (32-bit, non-prefetchable) [size=256]
	Region 2: Memory at e8101800 (32-bit, non-prefetchable) [size=128]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0+,D1-,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-
00: b7 10 07 10 13 00 10 02 20 00 80 07 08 50 00 00
10: 01 20 00 00 00 1c 10 e8 00 18 10 e8 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 b7 10 59 61
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 0a 0a
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 00 12 ec 00 40 00 08 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:05.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24 
[CrystalClear SoundFusion Audio Accelerator] (rev 01)
	Subsystem: IBM: Unknown device 0153
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
	Latency: 64 (1000ns min, 6000ns max)
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at e8100000 (32-bit, non-prefetchable) [size=4K]
	Region 1: Memory at e8000000 (32-bit, non-prefetchable) [size=1M]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 13 10 03 60 06 00 10 04 01 00 01 04 00 40 00 00
10: 00 00 10 e8 00 00 00 e8 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 53 01
30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 04 18
40: 01 00 22 06 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:07.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
00: 86 80 10 71 0f 00 80 02 02 00 80 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 4d 00 f3 04
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 0b 0b 0b 0b 92 00 00 00 00 f2 00 00 00 00 00 00
70: 00 00 00 00 00 00 0c 0c 00 00 00 00 00 00 00 00
80: 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 07 81 11 10 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 25 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 30 0f 00 00 00 00 00 00

00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) 
(prog-if 80 [Master])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 64
	Region 4: I/O ports at 1c00 [size=16]
00: 86 80 11 71 05 00 80 02 01 80 01 01 00 40 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 1c 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 07 a3 07 a3 00 00 00 00 05 00 02 02 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 30 0f 00 00 00 00 00 00

00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) 
(prog-if 00 [UHCI])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 64
	Interrupt: pin D routed to IRQ 11
	Region 4: I/O ports at 1c20 [size=32]
00: 86 80 12 71 05 00 80 02 01 00 03 0c 00 40 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 21 1c 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 04 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 30 0f 00 00 00 00 00 00

00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 03)
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin ? routed to IRQ 9
00: 86 80 13 71 03 00 80 02 03 00 80 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 01 10 00 00 0f ff bf 10 e1 30 00 00 80 00 10 00
50: 03 50 1d 00 e0 c9 7f 06 37 80 00 02 00 00 00 80
60: 00 00 00 60 e8 15 e7 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 f0 03 17 00 2e 00 11 00
80: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 41 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 30 0f 00 00 00 00 00 00

01:00.0 VGA compatible controller: S3 Inc. 86C270-294 Savage/IX-MV (rev 
11) (prog-if 00 [VGA])
	Subsystem: IBM ThinkPad T20
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (1000ns min, 63750ns max), cache line size 08
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=128M]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [80] AGP version 1.0
		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- 
FW- AGP3- Rate=x1,x2
		Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
00: 33 53 12 8c 07 00 30 02 11 00 00 03 08 40 00 00
10: 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 7f 01
30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 04 ff
40: 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 02 00 10 00 03 02 00 1f 00 00 00 00 40 02 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 80 21 06
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00


********************************************************************
WITH NO YENTA KERNEL 2.4.20
********************************************************************
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge 
(rev 03)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ >SERR- <PERR-
	Latency: 64
	Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
	Capabilities: [a0] AGP version 1.0
		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- 
FW- AGP3- Rate=x1,x2
		Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
00: 86 80 90 71 06 01 10 22 03 00 00 06 00 40 00 00
10: 08 00 00 f8 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 0c 82 00 ff 00 00 00 09 03 10 11 11 00 00 11 11
60: 08 10 10 18 20 20 20 20 00 00 00 00 00 aa 00 00
70: 20 1f 0a 38 45 01 03 01 27 1b 9c 00 10 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 04 61 00 00 00 05 00 00 00 00 00 00
a0: 02 00 10 00 03 02 00 1f 00 00 00 00 00 00 00 00
b0: 80 20 00 00 30 00 00 00 00 00 35 01 20 10 00 00
c0: 00 00 00 00 00 00 00 00 18 0c 83 cd 78 00 00 00
d0: 00 00 00 00 00 00 00 00 0c 00 00 00 00 00 00 00
e0: 4c ad ff bb 8a 3e 00 80 2c d3 f7 cf 9d 3e 00 00
f0: 40 01 00 00 00 f8 00 60 20 0f 00 00 00 00 00 00

00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge 
(rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 128
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	Memory behind bridge: f0000000-f7ffffff
	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B+
00: 86 80 91 71 1f 00 20 02 03 00 04 06 00 80 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 40 f0 00 a0 22
20: 00 f0 f0 f7 f0 ff 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 8c 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:02.0 CardBus bridge: Texas Instruments PCI1450 (rev 03)
	Subsystem: IBM: Unknown device 0130
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 168, cache line size 08
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at 50000000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=00, secondary=02, subordinate=04, sec-latency=176
	Memory window 0: 10000000-103ff000 (prefetchable)
	Memory window 1: 10400000-107ff000
	I/O window 0: 00004000-000040ff
	I/O window 1: 00004400-000044ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001
00: 4c 10 1b ac 07 00 10 02 03 00 07 06 08 a8 82 00
10: 00 00 00 50 a0 00 00 02 00 02 04 b0 00 00 00 10
20: 00 f0 3f 10 00 00 40 10 00 f0 7f 10 00 40 00 00
30: fc 40 00 00 00 44 00 00 fc 44 00 00 0b 01 c0 05
40: 14 10 30 01 01 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 78 d0 44 08 80 00 00 00 80 80 01 80 00 10 00 00
90: c0 82 66 40 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 00 11 fe 00 00 c0 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:02.1 CardBus bridge: Texas Instruments PCI1450 (rev 03)
	Subsystem: IBM: Unknown device 0130
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 168, cache line size 08
	Interrupt: pin B routed to IRQ 11
	Region 0: Memory at 50100000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=00, secondary=05, subordinate=07, sec-latency=176
	Memory window 0: 10800000-10bff000 (prefetchable)
	Memory window 1: 10c00000-10fff000
	I/O window 0: 00004800-000048ff
	I/O window 1: 00004c00-00004cff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001
00: 4c 10 1b ac 07 00 10 02 03 00 07 06 08 a8 82 00
10: 00 00 10 50 a0 00 00 02 00 05 07 b0 00 00 80 10
20: 00 f0 bf 10 00 00 c0 10 00 f0 ff 10 00 48 00 00
30: fc 48 00 00 00 4c 00 00 fc 4c 00 00 0b 02 c0 05
40: 14 10 30 01 01 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 78 d0 44 08 80 00 00 00 80 80 01 80 00 10 00 00
90: c0 82 66 40 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 00 11 fe 00 00 c0 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:03.0 Ethernet controller: 3Com Corporation 3c556B Hurricane CardBus 
(rev 20)
	Subsystem: 3Com Corporation: Unknown device 6356
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 80 (2500ns min, 2500ns max), cache line size 08
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at 1800 [size=256]
	Region 1: Memory at e8101400 (32-bit, non-prefetchable) [size=128]
	Region 2: Memory at e8101000 (32-bit, non-prefetchable) [size=128]
	Expansion ROM at <unassigned> [disabled] [size=128K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-
00: b7 10 56 60 17 00 10 02 20 00 00 02 08 50 80 00
10: 01 18 00 00 00 14 10 e8 00 10 10 e8 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 b7 10 56 63
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 0a 0a
40: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00
50: 01 00 02 fe 00 40 00 29 00 00 00 00 00 00 00 00
60: 00 00 46 86 49 a5 56 60 61 00 09 00 00 00 50 6d
70: 70 29 09 00 00 00 46 86 49 a5 10 00 00 00 aa 00
80: a6 32 00 00 00 00 00 00 00 00 00 00 29 04 30 00
90: 00 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:03.1 Communication controller: 3Com Corporation Mini PCI 56k Winmodem 
(rev 20)
	Subsystem: 3Com Corporation: Unknown device 6159
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at 2000 [size=256]
	Region 1: Memory at e8101c00 (32-bit, non-prefetchable) [size=256]
	Region 2: Memory at e8101800 (32-bit, non-prefetchable) [size=128]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0+,D1-,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-
00: b7 10 07 10 13 00 10 02 20 00 80 07 08 50 00 00
10: 01 20 00 00 00 1c 10 e8 00 18 10 e8 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 b7 10 59 61
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 0a 0a
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 00 12 ec 00 40 00 08 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:05.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24 
[CrystalClear SoundFusion Audio Accelerator] (rev 01)
	Subsystem: IBM: Unknown device 0153
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
	Latency: 64 (1000ns min, 6000ns max)
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at e8100000 (32-bit, non-prefetchable) [size=4K]
	Region 1: Memory at e8000000 (32-bit, non-prefetchable) [size=1M]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 13 10 03 60 06 00 10 04 01 00 01 04 00 40 00 00
10: 00 00 10 e8 00 00 00 e8 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 53 01
30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 04 18
40: 01 00 22 06 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:07.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
00: 86 80 10 71 0f 00 80 02 02 00 80 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 4d 00 f3 04
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 0b 0b 0b 0b 92 00 00 00 00 f2 00 00 00 00 00 00
70: 00 00 00 00 00 00 0c 0c 00 00 00 00 00 00 00 00
80: 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 07 81 11 10 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 25 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 30 0f 00 00 00 00 00 00

00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) 
(prog-if 80 [Master])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 64
	Region 4: I/O ports at 1c00 [size=16]
00: 86 80 11 71 05 00 80 02 01 80 01 01 00 40 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 1c 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 07 a3 07 a3 00 00 00 00 05 00 02 02 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 30 0f 00 00 00 00 00 00

00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) 
(prog-if 00 [UHCI])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 64
	Interrupt: pin D routed to IRQ 11
	Region 4: I/O ports at 1c20 [size=32]
00: 86 80 12 71 05 00 80 02 01 00 03 0c 00 40 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 21 1c 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 04 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 30 0f 00 00 00 00 00 00

00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 03)
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin ? routed to IRQ 9
00: 86 80 13 71 03 00 80 02 03 00 80 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 01 10 00 00 0f ff bf 10 e1 30 00 00 80 00 10 00
50: 03 50 1d 00 e0 c9 7f 06 37 80 00 02 00 00 00 80
60: 00 00 00 60 e8 15 e7 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 f0 03 17 00 2e 00 11 00
80: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 41 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 30 0f 00 00 00 00 00 00

01:00.0 VGA compatible controller: S3 Inc. 86C270-294 Savage/IX-MV (rev 
11) (prog-if 00 [VGA])
	Subsystem: IBM ThinkPad T20
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (1000ns min, 63750ns max), cache line size 08
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=128M]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [80] AGP version 1.0
		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- 
FW- AGP3- Rate=x1,x2
		Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
00: 33 53 12 8c 07 00 30 02 11 00 00 03 08 40 00 00
10: 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 7f 01
30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 04 ff
40: 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 02 00 10 00 03 02 00 1f 00 00 00 00 40 02 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 80 21 06
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00




^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: APM Suspend Problem
  2003-11-29  1:14 ` pZa1x
@ 2003-11-29  8:22   ` Russell King
  2003-11-29 11:26     ` pZa1x
  0 siblings, 1 reply; 28+ messages in thread
From: Russell King @ 2003-11-29  8:22 UTC (permalink / raw)
  To: pZa1x; +Cc: linux-kernel

On Sat, Nov 29, 2003 at 01:14:11AM +0000, pZa1x wrote:
> A follow-up
> 
> by shutting down PCMCIA and rmmod'ing all the related modules ie ide_cs, 
> ds, yenta_socket, pcmcia_core the suspend works on AC again.
> 
> So, I add them back one by one:
> pcmcia_core -> still works
> yenta_socket -> FAILS!
> rmmod yenta_socket -> works again!
> 
> Summary: suspend works on my Thinkpad T21
> (a) with no apm module or apmd but with all PCMCIA (ie. hardware 
> suspend- close lid etc);
> (b) with apm & apmd and all PCMCIA but no AC power
> (c) with apm & apmd but no yenta_socket and the rest but with AC power
> 
> The problem is a combination of apm, yenta_socket and AC power.

The output of:

lspci -vvxxxx

both with and without yenta_socket inserted would be a useful starting
point.

-- 
Russell King
 Linux kernel    2.6 ARM Linux   - http://www.arm.linux.org.uk/
 maintainer of:  2.6 PCMCIA      - http://pcmcia.arm.linux.org.uk/
                 2.6 Serial core

^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: APM Suspend Problem
  2003-11-29  1:02 pZa1x
@ 2003-11-29  1:14 ` pZa1x
  2003-11-29  8:22   ` Russell King
  0 siblings, 1 reply; 28+ messages in thread
From: pZa1x @ 2003-11-29  1:14 UTC (permalink / raw)
  To: pZa1x; +Cc: linux-kernel

A follow-up

by shutting down PCMCIA and rmmod'ing all the related modules ie ide_cs, 
ds, yenta_socket, pcmcia_core the suspend works on AC again.

So, I add them back one by one:
pcmcia_core -> still works
yenta_socket -> FAILS!
rmmod yenta_socket -> works again!

Summary: suspend works on my Thinkpad T21
(a) with no apm module or apmd but with all PCMCIA (ie. hardware 
suspend- close lid etc);
(b) with apm & apmd and all PCMCIA but no AC power
(c) with apm & apmd but no yenta_socket and the rest but with AC power

The problem is a combination of apm, yenta_socket and AC power.

pZa1x wrote:
> I would like to join in here. I have a Thinkpad T20 I just put 
> 2.6.0-test11 on and APM will only suspend properly if the power plug is 
> pulled out of the back (thanks for that tip, btw). With power connected, 
> it plays a high-low beep and turns off screen and HD without suspending 
> properly (and if left too long, may not come back to life).
> 
> I believe I read somewhere there is some kind of settings to override 
> power features when AC power is connected. Perhaps this problem is 
> related to that. I tried running "apm -i" and "apm -n" but it wouldn't 
> recognize the commands as set out in the man page.
> 
> If I stop apmd AND rmmod apm then I can suspend by closing the lid 
> (hardware suspend I guess) but then I have no battery monitor capability.
> 
> I tried ACPI but it would not work without =force as a kernel parameter 
> and when used, did not cleanly come back from a suspend.
> 
> APM worked perfectly in 2.4.20 which is what I used up to today. Are the 
> APM/ACPI people out there?
> 
> an interesting email on "suspend rejects" caused by kernel drivers from 
> a year ago or more:
> 
> http://open.nit.ca/lists/archives/apmd-list/msg00006.html
> 



^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: APM Suspend Problem
@ 2003-11-29  1:02 pZa1x
  2003-11-29  1:14 ` pZa1x
  0 siblings, 1 reply; 28+ messages in thread
From: pZa1x @ 2003-11-29  1:02 UTC (permalink / raw)
  To: linux-kernel

I would like to join in here. I have a Thinkpad T20 I just put 
2.6.0-test11 on and APM will only suspend properly if the power plug is 
pulled out of the back (thanks for that tip, btw). With power connected, 
it plays a high-low beep and turns off screen and HD without suspending 
properly (and if left too long, may not come back to life).

I believe I read somewhere there is some kind of settings to override 
power features when AC power is connected. Perhaps this problem is 
related to that. I tried running "apm -i" and "apm -n" but it wouldn't 
recognize the commands as set out in the man page.

If I stop apmd AND rmmod apm then I can suspend by closing the lid 
(hardware suspend I guess) but then I have no battery monitor capability.

I tried ACPI but it would not work without =force as a kernel parameter 
and when used, did not cleanly come back from a suspend.

APM worked perfectly in 2.4.20 which is what I used up to today. Are the 
APM/ACPI people out there?

an interesting email on "suspend rejects" caused by kernel drivers from 
a year ago or more:

http://open.nit.ca/lists/archives/apmd-list/msg00006.html


^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: APM Suspend Problem
       [not found]   ` <WAWd.BP.7@gated-at.bofh.it>
@ 2003-11-28 21:12     ` Michael Schierl
  0 siblings, 0 replies; 28+ messages in thread
From: Michael Schierl @ 2003-11-28 21:12 UTC (permalink / raw)
  To: linux-kernel

On Thu, 27 Nov 2003 21:30:18 +0100, in linux.kernel you wrote:

>No luck; my ThinkPad still does not go into the proper power-saving mode. The LCD
>blanks out and the HD spins down, but it is not a real sleep mode.

Nearly the same on my Acer 210TEV. The LCD does not go blank, but the
HD spins down.

Worked on -test3, but not on later kernels (with or without that
patch). 

Michael
-- 
"New" PGP Key! User ID: Michael Schierl <schierlm@gmx.de>
Key ID: 0x58B48CDD    Size: 2048    Created: 26.03.2002
Fingerprint:  68CE B807 E315 D14B  7461 5539 C90F 7CC8
http://home.arcor.de/mschierlm/mschierlm.asc

^ permalink raw reply	[flat|nested] 28+ messages in thread

end of thread, other threads:[~2003-12-25 19:18 UTC | newest]

Thread overview: 28+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-11-27  6:20 APM Suspend Problem Misha Nasledov
2003-11-27 11:46 ` Felipe Alfaro Solana
2003-11-27 20:22   ` Misha Nasledov
2003-11-27 22:58 ` Benjamin Herrenschmidt
2003-11-27 23:33   ` Misha Nasledov
2003-11-28 21:28 ` William Lee Irwin III
2003-11-28 21:50   ` Misha Nasledov
2003-11-28 21:50     ` William Lee Irwin III
2003-11-28 22:27       ` Nigel Cunningham
2003-11-28 22:49         ` William Lee Irwin III
2003-11-29  2:17           ` Misha Nasledov
2003-11-29  2:20             ` William Lee Irwin III
2003-11-29  2:35               ` Nigel Cunningham
2003-11-29  5:38               ` Shawn Willden
2003-11-29  5:46                 ` William Lee Irwin III
2003-11-29  9:57                   ` Misha Nasledov
2003-11-29  7:36                 ` Misha Nasledov
2003-12-01 20:24             ` Pavel Machek
2003-12-02 21:44 ` john stultz
     [not found] <WnPi.57n.5@gated-at.bofh.it>
     [not found] ` <WsPg.Xi.35@gated-at.bofh.it>
     [not found]   ` <WAWd.BP.7@gated-at.bofh.it>
2003-11-28 21:12     ` Michael Schierl
2003-11-29  1:02 pZa1x
2003-11-29  1:14 ` pZa1x
2003-11-29  8:22   ` Russell King
2003-11-29 11:26     ` pZa1x
2003-12-01 21:07       ` Russell King
2003-12-06 21:46         ` pZa1x
2003-12-07 17:06           ` Russell King
     [not found] <15Eea-Id-23@gated-at.bofh.it>
     [not found] ` <15Eea-Id-25@gated-at.bofh.it>
     [not found]   ` <15Eea-Id-27@gated-at.bofh.it>
     [not found]     ` <15Eea-Id-21@gated-at.bofh.it>
2003-12-25 19:17       ` Michael Schierl

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).