LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* 2.6.6-mm3
@ 2004-05-16 9:55 Andrew Morton
2004-05-16 10:35 ` 2.6.6-mm3 Prakash K. Cheemplavam
` (10 more replies)
0 siblings, 11 replies; 27+ messages in thread
From: Andrew Morton @ 2004-05-16 9:55 UTC (permalink / raw)
To: linux-kernel
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.6/2.6.6-mm3/
- A few VM changes, getting things synced up better with Andrea's work.
- A new kgdb stub, for ia64 (what happened to the grand unified kgdb
project?)
- The backing-store-for-sysfs patches need redoing, and have been
temporarily dropped
Changes since 2.6.6-mm2:
bk-acpi.patch
bk-agpgart.patch
bk-alsa.patch
bk-cifs.patch
bk-cpufreq.patch
bk-input.patch
bk-netdev.patch
bk-pci.patch
bk-scsi.patch
External trees, latest versions.
-yield_irq.patch
-MSEC_TO_JIFFIES-fixups.patch
-msec_to_jiffies-fixups-speedup.patch
-revert-process-migration-speedup.patch
-vm-accounting-fix.patch
-kexec-reserve-syscall-slot.patch
-do_mounts_rd-malloc-fix.patch
-page_count-fixups.patch
-page-freeing-race-fix.patch
-arch-atomic_add_negative.patch
-arch-atomic_inc_and_test.patch
-frame-pointer-based-stack-dumps.patch
-bk-driver-core-module-fix.patch
-writeback_inodes-fix.patch
-wakefunc.patch
-wakeup.patch
-filtered_page.patch
-filtered_buffer.patch
-rename-rmap_lock.patch
-rmap-5-swap_unplug-page-revert.patch
-blk_run_page.patch
-blk_run_page-swap-fixup.patch
-blk_run_page-sync_buffer-revert.patch
-swap-speedups-and-fix.patch
-ppc64-uninline-__pte_free_tlb.patch
-export-clear_pages-on-ppc32.patch
-ppc32-fix-__flush_dcache_icache_phys-for-book-e.patch
-ppc32-fix-copy-prefetch-on-non-coherent-ppcs.patch
-ppc32-add-book-e--ppc44x-specific-exception-support.patch
-ppc32-add-book-e--ppc44x-specific-exception-support-2.patch
-ppc32-new-ocp-core-support-updated.patch
-ppc32-bubinga-405ep-for-new-ocp.patch
-ppc32-ppc44x-lib-support.patch
-ppc32-ibm-ppc4xx-specific-ocp-support.patch
-ppc32-4xx-core-fixes-and-440gx-pic-support.patch
-ppc32-update-4xx-defconfigs.patch
-ppc32-ppc40x-ports-for-new-ocp.patch
-ppc32-ppc44x-ports-for-new-ocp.patch
-sched-loadup-roundup.patch
-sched-activate-tslt.patch
-use-soft-float.patch
-0-autofs4-2.6.0-signal-20040405.patch
-add-omitted-autofs4-super-block-field.patch
-1-autofs4-2.6.4-cleanup-20040405.patch
-2-autofs4-2.6.4-fill_super-20040405.patch
-3-autofs4-2.6.0-bkl-20040405.patch
-4-autofs4-2.6.0-expire-20040405.patch
-4-autofs4-260-expire-20040405-fix.patch
-4-autofs4-260-expire-20040405-fix-fix.patch
-4-autofs4-2.6.0-expire-20040405-may_umount_tree-cleanup.patch
-5-autofs4-2.6.0-readdir-20040405.patch
-umount-after-bad-chdir.patch
-autofs4-fix-handling-of-chdir-and-chroot.patch
-6-autofs4-2.6.0-may_umount-20040405.patch
-7-autofs4-2.6.0-extra-20040405.patch
-autofs-locking-fix.patch
-autofs4-race-fix.patch
-autofs4-compat-ioctls.patch
-radeon-garbled-screen-fix.patch
-neomagic-driver-update.patch
-tridentfbc-warning-fix.patch
-hgafbc-warning-fix.patch
-tdfxfbc-warning-fix.patch
-imsttfbc-warning-fix.patch
-fbdev-logo-handling-fix.patch
-fbdev-redundant-prows-calculation-removal.patch
-fbdev-remove-redundant-local.patch
-fbdev-access_align-default.patch
-fix-null-ptr-dereference-in-pm2fb_probe-2.patch
-virtual-fbdev-updates.patch
-vesa-fbdev-update.patch
-vesa-fbdev-update-fix.patch
-new-asiliant-framebuffer-driver.patch
-fbcon-and-unimap.patch
-videodev-handle-class_register-failure.patch
-q40-fbdev-updates.patch
-acpiphp_glue-oops-fix.patch
-dpt_i2o.patch
-ia64-cpuhotplug-core_kernel_init.patch
-ia64-cpuhotplug-init_removal.patch
-ia64-cpuhotplug-sysfs_ia64.patch
-ia64-cpuhotplug-irq_affinity_fix.patch
-ia64-cpuhotplug-palinfo.patch
-ia64-cpu-hotplug-cpu_present-2.patch
-ia64-cpu-hotplug-cpu_present-2-fix.patch
-ia64-cpuhotplug-hotcpu.patch
-module-ref-counting-for-vt-console-drivers.patch
-i2o-subsystem-fixing-and-cleanup-for-26-i2o-config-cleanpatch.patch
-i2o-subsystem-fixing-and-cleanup-for-26-i2o-passthrupatch.patch
-i2o-64-bit-fixes.patch
-i2o-subsystem-fixing-and-cleanup-for-26-i2o_block-cleanuppatch.patch
-i2o-subsystem-fixing-and-cleanup-for-26-i2o-64-bit-fixpatch.patch
-i2o-subsystem-fixing-and-cleanup-for-26-i2o-makefile-cleanuppatch.patch
-ia64-remove-errno-refs.patch
-invalid-notify_changesymlink-in-nfsd-fix.patch
-fix-net-tulip-winbond-840c-warning.patch
-d_flags-locking-fix.patch
-d_vfs_flags-locking-fix.patch
-dentry-shrinkage.patch
-dentry-qstr-consolidation.patch
-dentry-qstr-consolidation-fix.patch
-dentry-d_bucket-fix.patch
-dentry-d_flags-consolidation.patch
-dentry-layout-tweaks.patch
-to-fix-i2o_proc-kernel-panic-on-access-of-proc-i2o-iop0-lct.patch
-i2o_proc-module-owner-fix.patch
-slabify-iocontext-request_queue.patch
-show-last-kernel-image-symbol-in-proc-kallsyms.patch
-include-aliases-in-kallsyms.patch
-make-buildcheck.patch
-make-buildcheck-license-fix.patch
-efivars-fix.patch
-expose-backing-dev-max-read-ahead.patch
-ib700wdt-fix.patch
-ib700wdt-fix-2.patch
-laptop-doc-bugfix.patch
-create_workqueue-locking-bogon.patch
-problem-with-aladdincard-entry-in-parport_pc.patch
-watchdog-timer-for-intel-ixp4xx-cpus.patch
-i810_audio-fixes-from-herbert-xu.patch
-ide-diskc-revert-to-previous-24-way-of-handling-flush-cache-commands.patch
-update-laptop-mode-control-script-with-xfs_hz=100.patch
-del_singleshot_timer_sync.patch
-del_singleshot_timer_sync-tweaks.patch
-dquot_release-oops-workaround.patch
-h8-300-update-1-9-bitopsh-add-find_next_bit.patch
-h8-300-update-2-9-ldscripts-fix.patch
-h8-300-update-3-9-pic-support.patch
-h8-300-update-4-9-preempt-support.patch
-h8-300-update-5-9-sci-driver-fix.patch
-h8-300-update-6-9-ne-driver.patch
-h8-300-update-7-9-kconfig.patch
-h8-300-update-8-9-delete-headers.patch
-h8-300-update-9-9-more-cleanup.patch
-calculate-ngroups_per_block-from-page_size.patch
-pci-debug-compile-fix-in-sis_router_probe.patch
-remove-empty-build-of-capabilityo.patch
-minor-cleanups-in-capabilityc.patch
-fix-linux-doc-errors.patch
-fix-block-layer-ioctl-bug.patch
-x86_64-has-buggy-ffs-implementation.patch
-make-reiserfs-not-to-crash-on-oom.patch
-implement-print_modules.patch
-m68k-print_modules.patch
-fix-endianess-in-modpost-when-cross-compiling-for-sparc-on-i386.patch
-fix-cyclades-compile-with-pci.patch
-fix-tlanc-for-pci.patch
-fix-aic7xxx_oldc-for-pci.patch
-powernow-k8-buggy-bios-override-for-266.patch
-x86_64-msr-warning-fix.patch
Merged
-x86_64-doesnt-like-gcc-333.patch
Dropped in favour of compile-time workaround
+idedisk_reboot.patch
Don't spin down IDE disks on reboot
+revert-i8042-interrupt-handling.patch
This was causing lockups when people hit caps-lock.
+kgdb-ia64-support.patch
An ia64 KGDB stub.
+swapper_space-tree_lock-fix.patch
+__add_to_swap_cache-simplification.patch
+revert-swapcache-changes.patch
+sync_page-use-swapper-space.patch
+__set_page_dirty_nobuffers-race-fix.patch
Various VM fixes, cleanups and changes to sync things up a bit more with
2.6.5 and -aa trees.
-rmap-7-object-based-rmap-sync_page-fix.patch
Folded into rmap-7-object-based-rmap.patch
-try_to_unmap_cluster-comment.patch
Folded into rmap-8-unmap-nonlinear.patch
-rmap-9-page_add_anon_rmap-bug-fix.patch
Folded into rmap-9-remove-pte_chains.patch
+numa-api-fix-end-of-memory-handling-in-mbind.patch
NUMA API fixup
-rmap-19-arch-prio_tree-parisc.patch
Folded into rmap-19-arch-prio_tree.patch
-rmap-20-i_mmap_shared-into-i_mmap-parisc.patch
Folded into rmap-20-i_mmap_shared-into-i_mmap.patch
-rmap-22-flush_dcache_mmap_lock-parisc.patch
Folded into rmap-22-flush_dcache_mmap_lock.patch
+ppc32-ibm-powerpc-750gx-support.patch
+ppc32-some-whitespace-fixes.patch
+ppc32-handle-altivec-assist-exception-properly.patch
+ppc32-update-defconfigs.patch
+ppc32-fix-mod_incdec_use_count-abuse-in-ppc-4xx-8xx-code.patch
ppc32 updates
+sched-ifdef-active-balancing.patch
scheduler space saving. Still under discussion.
-advansys-fix.patch
Dropped - the driver's broken so leave it generating warnings.
-cciss-logical-device-queues.patch
Dropped - it doesn't address the starvation problem of having multiple
devices share a single queue.
-ext3-discard-reservation-in-last-iput-fix-patch.patch
-ext3-discard-reservation-in-last-iput-fix-patch-fix.patch
Folded into ext3-lazy-discard-reservation-window-patch.patch
+dpt_i2o-warning-fixes.patch
Fix a couple of warnings
-fix-sysfs-symlinks.patch
-sysfs-backing-store-sysfs_rename_dir-fix.patch
-sysfs-leaves-mount.patch
-sysfs-leaves-dir.patch
-sysfs-leaves-file.patch
-sysfs-leaves-symlink.patch
-sysfs-leaves-bin.patch
-sysfs-leaves-misc.patch
Other patches broke the sysfs-backing-store work. It's being redone.
-die_386_graphic.patch
Sorry, it can cause important pre-oops printks to scroll away.
+idr-fixups.patch
Several fixes for the IDR library code.
+mqueue-rlimit-compile-fix-for-ppc-cris-m68k.patch
rlimits build fix
+have-xfs-use-kernel-provided-qsort-fix.patch
XFS makefile fix for the qsort rework
+hpet-driver.patch
HPET clock driver (needs work)
+remove-hardcoded-offsets-from-i386-asm.patch
i386 assembly cleanup
+madvise-len-check.patch
Fix madvise() argument checking
+checkstack-target.patch
Add `make checkstack'
+dentry-size-tuning.patch
Fiddle with dentry sizing a bit.
+vm-shrink-zone.patch
Fix bogon in page reclaim
+kill-off-pc9800.patch
Remove the PC9800 subarch
+266-mm2-r8169-napi.patch
+266-mm2-r8169-janitoring.patch
+266-mm2-r8169-register-rename.patch
+266-mm2-r8169-ethtool-set_settings.patch
+266-mm2-r8169-ethtool-get_settings.patch
+266-mm2-r8169-link-handling-rework-1-2.patch
+266-mm2-r8169-link-handling-rework-2-2.patch
r8169 net driver update
+enable-runtime-cache-line-size-for-slab-on-i386.patch
Tune slab alignment at runtime for i386
+allow-arch-override-for-kmem_bufctl_t.patch
Permit 16-bit metadata in slab caches, use it on i386
+add-kmem_cache_alloc_node.patch
NUMA optimisations for slab.
+work-around-gcc-333-hammer-sched-miscompilation-on-x86-64.patch
Work around the x86_64 gcc-3.3.3 miscompilation
+befs-maintainer-update.patch
MAINTAINERS update
+quota-recursion-fix-fix.patch
Clean up recent quota patch
+nfs-long-symlinks-fix.patch
Fix for super-long symlinks on nfsv3
+fix-for-266-makefiles-to-get-kbuild_output-working.patch
Build fix for build-in-a-separate-directory on some architectures.
+kexec-reserve-syscall-slot.patch
Reserve the kexec syscall slot on supported architectures.
+fore200e-warning-fixes.patch
+qlogicfas408-warning-fix.patch
Fix warnings.
All 202 patches
linus.patch
system-state-splitup.patch
system_state splitup
idedisk_reboot.patch
ide-disk.c: don't put disks in STANDBY mode on reboot
bk-acpi.patch
bk-agpgart.patch
bk-alsa.patch
bk-cifs.patch
bk-cpufreq.patch
bk-input.patch
bk-netdev.patch
bk-pci.patch
bk-scsi.patch
mm.patch
add -mmN to EXTRAVERSION
fealnx-bogon-fix.patch
fealnx.c spinlock fix
acpi-procfs-fix.patch
acpi procfs fix
revert-i8042-interrupt-handling.patch
revert i8042 input interrupt handling changes
kgdb-ga.patch
kgdb stub for ia32 (George Anzinger's one)
kgdbL warning fix
kgdb buffer overflow fix
kgdbL warning fix
kgdb: CONFIG_DEBUG_INFO fix
x86_64 fixes
correct kgdb.txt Documentation link (against 2.6.1-rc1-mm2)
kgdb: fix for recent gcc
kgdb warning fixes
THREAD_SIZE fixes for kgdb
kgdb-in-sched_functions.patch
kgdboe-netpoll.patch
kgdb-over-ethernet via netpoll
kgdboe: fix configuration of MAC address
kgdb-x86_64-support.patch
kgdb-x86_64-support.patch for 2.6.2-rc1-mm3
kgdb-x86_64-warning-fixes
kgdb-in-sched_functions-x86_64.patch
kgdb-ia64-support.patch
IA64 kgdb support
swapper_space-tree_lock-fix.patch
Make swapper_space tree_lock irq-safe
__add_to_swap_cache-simplification.patch
__add_to_swap_cache and add_to_pagecache() simplification
revert-swapcache-changes.patch
revert recent swapcache handling changes
sync_page-use-swapper-space.patch
Make sync_page use swapper_space again
__set_page_dirty_nobuffers-race-fix.patch
__set_page_dirty_nobuffers race fix
rmap-7-object-based-rmap.patch
rmap 7 object-based rmap
rmap-7-object-based-rmap-sync_page-fix
ia64-rmap-build-fix.patch
ia64 rmap build fix
rmap-8-unmap-nonlinear.patch
rmap 8 unmap nonlinear
try_to_unmap_cluster-comment
slab-panic.patch
slab: consolidate panic code
rmap-9-remove-pte_chains.patch
rmap 9 remove pte_chains
page_add_anon_rmap BUG fix
rmap-10-add-anonmm-rmap.patch
rmap 10 add anonmm rmap
rmap-anonhd-locking-fix.patch
rmap anonhd locking fix
rmap-11-mremap-moves.patch
rmap 11 mremap moves
rmap-12-pgtable-remove-rmap.patch
rmap 12 pgtable remove rmap
rmap-13-include-asm-deletions.patch
rmap 13 include/asm deletions
i_mmap_lock.patch
Convert i_shared_sem back to a spinlock
i_mmap_lock fix 1
i_mmap_lock fix 2
i_mmap_lock mremap fix
rmap-14-i_shared_lock-fixes.patch
rmap 14: i_shared_lock fixes
numa-api-x86_64.patch
numa api: -64 support
numa api: Bitmap bugfix
numa-api-i386.patch
numa api: Add i386 support
numa-api-ia64.patch
numa api: Add IA64 support
numa-api-core.patch
numa api: Core NUMA API code
numa api: docs and policy_vma() locking fix
numa-api-core-tweaks
Some fixes for NUMA API
From: Matthew Dobson <colpatch@us.ibm.com>
Subject: [PATCH] include/linux/gfp.h cleanup for NUMA API
numa-api-core bitmap_clear fixes
mpol-in-copy_vma.patch
mpol in copy_vma
numa-api-core-slab-panic.patch
numa-api-core-slab-panic
numa-api-statistics-2.patch
Re-add NUMA API statistics
numa-api-vma-policy-hooks.patch
numa api: Add VMA hooks for policy
numa-api-vma-policy-hooks fix
numa-api-shared-memory-support.patch
numa api: Add shared memory support
numa-api-shared-memory-support-tweaks
small-numa-api-fixups.patch
small numa api fixups
small-numa-api-fixups-fix
small-numa-api-fixups-fix.patch
small-numa-api-fixups-fix
numa-api-statistics.patch
numa api: Add statistics
numa-api-anon-memory-policy.patch
numa api: Add policy support to anonymous memory
numa-api-fix-end-of-memory-handling-in-mbind.patch
numa api: fix end of memory handling in mbind
rmap-15-vma_adjust.patch
rmap 15: vma_adjust
rmap-16-pretend-prio_tree.patch
rmap 16: pretend prio_tree
rmap-17-real-prio_tree.patch
rmap 17: real prio_tree
rmap-18-i_mmap_nonlinear.patch
rmap 18: i_mmap_nonlinear
unmap_mapping_range-comment.patch
unmap_mapping_range-comment
rmap-19-arch-prio_tree.patch
rmap 19: arch prio_tree
rmap-19-arch-prio_tree-parisc
vm_area_struct-size-comment.patch
vm_area_struct size comment
rmapc-comment-style-fixups.patch
rmap.c comment/style fixups
rmap-20-i_mmap_shared-into-i_mmap.patch
rmap 20 i_mmap_shared into i_mmap
rmap-20-i_mmap_shared-into-i_mmap-parisc
rmap-21-try_to_unmap_one-mapcount.patch
rmap 21 try_to_unmap_one mapcount
rmap-22-flush_dcache_mmap_lock.patch
rmap 22 flush_dcache_mmap_lock
rmap-22-flush_dcache_mmap_lock-parisc
rmap-23-empty-flush_dcache_mmap_lock.patch
rmap 23 empty flush_dcache_mmap_lock
rmap-24-no-rmap-fastcalls.patch
rmap 24 no rmap fastcalls
rmap-27-memset-0-vma.patch
rmap 27 memset 0 vma
rmap-28-remove_vm_struct.patch
rmap 28 remove_vm_struct
rmap-29-vm_reserved-safety.patch
rmap 29 VM_RESERVED safety
rmap-30-fix-bad-mapcount.patch
rmap 30 fix bad mapcount
rmap-31-unlikely-bad-memory.patch
rmap 31 unlikely bad memory
rmap-32-zap_pmd_range-wrap.patch
rmap 32 zap_pmd_range wrap
rmap-33-install_arg_page-vma.patch
rmap 33 install_arg_page vma
partial-prefetch-for-vma_prio_tree_next.patch
partial prefetch for vma_prio_tree_next
must-fix.patch
must fix lists update
must fix list update
mustfix update
must-fix-update-5.patch
must-fix update
ppc32-ibm-powerpc-750gx-support.patch
ppc32: IBM PowerPC 750GX Support
ppc32-some-whitespace-fixes.patch
ppc32: some whitespace fixes
ppc32-handle-altivec-assist-exception-properly.patch
ppc32: Handle altivec assist exception properly
ppc32-update-defconfigs.patch
ppc32: update defconfigs
ppc32-fix-mod_incdec_use_count-abuse-in-ppc-4xx-8xx-code.patch
ppc32: fix MOD_{INC,DEC}_USE_COUNT abuse in 4xx/8xx code
ppc64-reloc_hide.patch
invalidate_inodes-speedup.patch
invalidate_inodes speedup
more invalidate_inodes speedup fixes
config_spinline.patch
uninline spinlocks for profiling accuracy.
allow-i386-to-reenable-interrupts-on-lock-contention.patch
Allow i386 to reenable interrupts on lock contention
pdflush-diag.patch
get_user_pages-handle-VM_IO.patch
fix get_user_pages() against mappings of /dev/mem
pci_set_power_state-might-sleep.patch
slab-leak-detector.patch
slab leak detector
mm/slab.c warning in cache_alloc_debugcheck_after
local_bh_enable-warning-fix.patch
sched-ifdef-active-balancing.patch
sched: ifdef active balancing
schedstats.patch
sched: scheduler statistics
cond_resched-might-sleep.patch
cond_resched() might sleep
fa311-mac-address-fix.patch
wrong mac address with netgear FA311 ethernet card
pid_max-fix.patch
Bug when setting pid_max > 32k
non-readable-binaries.patch
Handle non-readable binfmt_misc executables
binfmt_misc-credentials.patch
binfmt_misc: improve calaulation of interpreter's credentials
poll-select-longer-timeouts.patch
poll()/select(): support longer timeouts
poll-select-range-check-fix.patch
poll()/select() range checking fix
poll-select-handle-large-timeouts.patch
poll()/select(): handle long timeouts
add-a-slab-for-ethernet.patch
Add a kmalloc slab for ethernet packets
siimage-update.patch
ide: update for siimage driver
shm-do_munmap-check.patch
stack-overflow-test-fix.patch
Fix stack overflow test for non-8k stacks
jbd-remove-livelock-avoidance.patch
JBD: remove livelock avoidance code in journal_dirty_data()
logitech-keyboard-fix.patch
2.6.5-rc2 keyboard breakage
stack-reductions-nfsread.patch
stack reductions: nfs read
speed-up-sata.patch
speed up SATA
journal_add_journal_head-debug.patch
journal_add_journal_head-debug
list_del-debug.patch
list_del debug check
oops-dump-preceding-code.patch
i386 oops output: dump preceding code
lockmeter.patch
lockmeter
ia64 CONFIG_LOCKMETER fix
sk98lin-buggy-vpd-workaround.patch
net/sk98lin: correct buggy VPD in ASUS MB
unplug-can-sleep.patch
unplug functions can sleep
firestream-warnings.patch
firestream warnings
ext3_rsv_cleanup.patch
ext3 block reservation patch set -- ext3 preallocation cleanup
ext3_rsv_base.patch
ext3 block reservation patch set -- ext3 block reservation
ext3 reservations: fix performance regression
ext3 block reservation patch set -- mount and ioctl feature
ext3 block reservation patch set -- dynamically increase reservation window
ext3-reservation-default-on.patch
ext3 reservation: default to on
ext3-reservation-ifdef-cleanup-patch.patch
ext3 reservation ifdef cleanup patch
ext3-reservation-max-window-size-check-patch.patch
ext3 reservation max window size check patch
ext3-reservation-file-ioctl-fix.patch
ext3 reservation file ioctl fix
ext3-lazy-discard-reservation-window-patch.patch
ext3 lazy discard reservation window patch
ext3 discard reservation in last iput fix patch
Fix lazy reservation discard
ext3-reservation-bad-inode-fix.patch
ext3 reservations: bad_inode fix
ext3_reservation_discard_race_fix.patch
ext3 reservation discard race fix
clean-up-asm-pgalloch-include.patch
Clean up asm/pgalloc.h include
clean-up-asm-pgalloch-include-2.patch
Clean up asm/pgalloc.h include
clean-up-asm-pgalloch-include-3.patch
Clean up asm/pgalloc.h include 3
ppc64-uninline-__pte_free_tlb.patch
ppc64: uninline __pte_free_tlb()
input-tsdev-fixes.patch
tsdev.c fixes
fix-scancode-keycode-scancode-conversion-for-265.patch
Fix scancode->keycode->scancode conversion
use-less-stack-in-ide_unregister.patch
use less stack in ide_unregister
fealnx-mac-address-and-other-issues.patch
Fealnx. Mac address and other issues
reiserfs-group-alloc-9.patch
reiserfs: block allocator optimizations
reiserfs-remove-debugging-warning-from-block-allocator.patch
reiserfs: remove debugging warning from block allocator
reiserfs-group-alloc-9-build-fix.patch
reiserfs-group-alloc-9 build fix
reiserfs-search_reada-5.patch
reiserfs: btree readahead
reiserfs-data-logging-support.patch
reiserfs data logging support
problems-with-atkbd_command--atkbd_interrupt-interaction.patch
Problems with atkbd_command & atkbd_interrupt interaction
mark-config_mac_serial-drivers-macintosh-macserialc-as-broken.patch
Mark CONFIG_MAC_SERIAL (drivers/macintosh/macserial.c) as broken
sis-agp-updates.patch
fbdev: SIS AGP updates
clear_backing_dev_congested.patch
clear_baking_dev_congested
dpt_i2o-warning-fixes.patch
dpt_i2o warning fixes
make-4k-stacks-permanent.patch
make 4k stacks permanent
force-config_regparm-to-y.patch
Force CONFIG_REGPARM to `y'
missing-closing-n-in-printk.patch
missing closing n in printk
invalid-notify_changesymlink-in-nfsd.patch
Invalid notify_change(symlink, [ATTR_MODE]) in nfsd
Fix "Invalid notify_change(symlink, [ATTR_MODE]) in nfsd"
hugetlb_shm_group-sysctl-gid-0-fix.patch
hugetlb_shm_group sysctl-gid-0-fix
mlock_group-sysctl.patch
mlock_group sysctl
nfs_writepage_sync-stack-reduction.patch
nfs_writepage_sync stack reduction
nfs4-stack-reduction.patch
nfs4 stack reduction
idr-overflow-fixes.patch
Fixes for idr code
idr-overflow-fixes fix
More fixes for idr code
Fixes for POSIX timers
timers-signals-rlimits-setuid-fix
timers-signals-rlimits-fix
timers-signals-rlimits-rename-stuff
idr-overflow-fixes fix
More fixes for idr code
idr-remove-counter.patch
idr: remove counter bits from id's
idr-fixups.patch
IDR fixups
rlim-add-rlimit-entry-for-controlling-queued-signals.patch
RLIM: add rlimit entry for controlling queued signals
rlim-add-sigpending-field-to-user_struct.patch
RLIM: add sigpending field to user_struct
rlim-pass-task_struct-in-send_signal.patch
RLIM: pass task_struct in send_signal()
rlim-add-simple-get_uid-helper.patch
RLIM: add simple get_uid() helper
rlim-enforce-rlimits-on-queued-signals.patch
RLIM: enforce rlimits on queued signals
rlim-remove-unused-queued_signals-global-accounting.patch
RLIM: remove unused queued_signals global accounting
rlim-add-rlimit-entry-for-posix-mqueue-allocation.patch
RLIM: add rlimit entry for POSIX mqueue allocation
mqueue-rlimit-compile-fix-for-ppc-cris-m68k.patch
mqueue rlimit compile fix for ppc/cris/m68k
rlim-add-mq_bytes-to-user_struct.patch
RLIM: add mq_bytes to user_struct
rlim-add-mq_attr_ok-helper.patch
RLIM: add mq_attr_ok() helper
rlim-enforce-rlimits-for-posix-mqueue-allocation.patch
RLIM: enforce rlimits for POSIX mqueue allocation
rlim-adjust-default-mqueue-sizes.patch
RLIM: adjust default mqueue sizes
call-might_sleep-in-tasklet_kill.patch
Call might_sleep() in tasklet_kill
add-qsort-library-function.patch
add qsort library function
have-xfs-use-kernel-provided-qsort.patch
Have XFS use kernel-provided qsort
have-xfs-use-kernel-provided-qsort-fix.patch
have-xfs-use-kernel-provided-qsort-fix
slabify-iocontext-request_queue-SLAB_PANIC.patch
slabify-iocontext-request_queue: use SLAB_PANIC
raid-locking-fix.patch
raid locking fix.
serial-fifo-size-is-ignored.patch
serial fifo size is ignored
seeky-readahead-speedups.patch
speed up readahead for seeky loads
really-ptrace-single-step-2.patch
ptrace single-stepping fix
add-disable-param-to-capabilities-module.patch
security: add disable param to capabilities module
fix-crash-on-modprobe-ohci1394.patch
fix crash on `modprobe ohci1394; modprobe -r ohci1394'
abs-cleanup.patch
abs() cleanup
hpet-driver.patch
HPET driver
remove-hardcoded-offsets-from-i386-asm.patch
Remove hardcoded offsets from i386 asm
madvise-len-check.patch
Fix madvise length checking
checkstack-target.patch
Add `make checkstack' target
dentry-size-tuning.patch
dentry size tuning
vm-shrink-zone.patch
Fix arithmetic in shrink_zone()
kill-off-pc9800.patch
Remove PC9800 support
266-mm2-r8169-napi.patch
r8169: napi
266-mm2-r8169-janitoring.patch
r8169: janitoring
266-mm2-r8169-register-rename.patch
r8169: register rename
266-mm2-r8169-ethtool-set_settings.patch
r8169: ethtool .set_settings
266-mm2-r8169-ethtool-get_settings.patch
r8169: ethtool .get_settings
266-mm2-r8169-link-handling-rework-1-2.patch
r8169: link handling rework (1/2)
266-mm2-r8169-link-handling-rework-2-2.patch
r8169: link handling rework (2/2)
enable-runtime-cache-line-size-for-slab-on-i386.patch
slab: enable runtime cache line size on i386
allow-arch-override-for-kmem_bufctl_t.patch
slab: allow arch override for kmem_bufctl_t
add-kmem_cache_alloc_node.patch
slab: add kmem_cache_alloc_node
work-around-gcc-333-hammer-sched-miscompilation-on-x86-64.patch
Work around gcc 3.3.3-hammer sched miscompilation on x86-64
befs-maintainer-update.patch
BeFS MAINTAINERS update
quota-recursion-fix-fix.patch
quota-recursion-fix-fix
nfs-long-symlinks-fix.patch
NFS: fix stack overflow with long symlinks
fix-for-266-makefiles-to-get-kbuild_output-working.patch
Fix for Makefiles to get KBUILD_OUTPUT working
kexec-reserve-syscall-slot.patch
reserve syscall slots for kexec
fore200e-warning-fixes.patch
fore200e.c warning fix
qlogicfas408-warning-fix.patch
qlogicfas408.c warning fix
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.6-mm3
2004-05-16 9:55 2.6.6-mm3 Andrew Morton
@ 2004-05-16 10:35 ` Prakash K. Cheemplavam
2004-05-16 11:00 ` 2.6.6-mm3 Gene Heskett
2004-05-16 16:29 ` 2.6.6-mm3 Andrew Morton
2004-05-16 18:38 ` 2.6.6-mm3: USB console.c doesn't compile Adrian Bunk
` (9 subsequent siblings)
10 siblings, 2 replies; 27+ messages in thread
From: Prakash K. Cheemplavam @ 2004-05-16 10:35 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.6/2.6.6-mm3/
Uhm, where's the patch? ;-)
Prakash
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.6-mm3
2004-05-16 10:35 ` 2.6.6-mm3 Prakash K. Cheemplavam
@ 2004-05-16 11:00 ` Gene Heskett
2004-05-16 16:29 ` 2.6.6-mm3 Andrew Morton
1 sibling, 0 replies; 27+ messages in thread
From: Gene Heskett @ 2004-05-16 11:00 UTC (permalink / raw)
To: Prakash K. Cheemplavam; +Cc: Andrew Morton, linux-kernel
On Sunday 16 May 2004 06:35, Prakash K. Cheemplavam wrote:
>Andrew Morton wrote:
>> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.
>>6/2.6.6-mm3/
>
>Uhm, where's the patch? ;-)
>
>Prakash
I'll second that question.
--
Cheers, Gene
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
99.22% setiathome rank, not too shabby for a WV hillbilly
Yahoo.com attorneys please note, additions to this message
by Gene Heskett are:
Copyright 2004 by Maurice Eugene Heskett, all rights reserved.
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.6-mm3
2004-05-16 10:35 ` 2.6.6-mm3 Prakash K. Cheemplavam
2004-05-16 11:00 ` 2.6.6-mm3 Gene Heskett
@ 2004-05-16 16:29 ` Andrew Morton
1 sibling, 0 replies; 27+ messages in thread
From: Andrew Morton @ 2004-05-16 16:29 UTC (permalink / raw)
To: Prakash K. Cheemplavam; +Cc: linux-kernel
"Prakash K. Cheemplavam" <PrakashKC@gmx.de> wrote:
>
> Andrew Morton wrote:
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.6/2.6.6-mm3/
>
> Uhm, where's the patch? ;-)
>
Sorry about that. It is there now.
^ permalink raw reply [flat|nested] 27+ messages in thread
* 2.6.6-mm3: USB console.c doesn't compile
2004-05-16 9:55 2.6.6-mm3 Andrew Morton
2004-05-16 10:35 ` 2.6.6-mm3 Prakash K. Cheemplavam
@ 2004-05-16 18:38 ` Adrian Bunk
2004-05-17 16:32 ` Greg KH
2004-05-16 20:15 ` [patch] 2.6.6-mm3: more PC9800 removal Adrian Bunk
` (8 subsequent siblings)
10 siblings, 1 reply; 27+ messages in thread
From: Adrian Bunk @ 2004-05-16 18:38 UTC (permalink / raw)
To: Andrew Morton, greg; +Cc: linux-kernel
The following compile error comes from Linus' tree:
<-- snip -->
...
CC drivers/usb/serial/console.o
drivers/usb/serial/console.c: In function `usb_console_setup':
drivers/usb/serial/console.c:140: warning: implicit declaration of function `serial_paranoia_check'
...
LD .tmp_vmlinux1
drivers/built-in.o(.init.text+0x698c8): In function `usb_console_setup':
: undefined reference to `serial_paranoia_check'
make: *** [.tmp_vmlinux1] Error 1
<-- snip -->
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 27+ messages in thread
* [patch] 2.6.6-mm3: more PC9800 removal
2004-05-16 9:55 2.6.6-mm3 Andrew Morton
2004-05-16 10:35 ` 2.6.6-mm3 Prakash K. Cheemplavam
2004-05-16 18:38 ` 2.6.6-mm3: USB console.c doesn't compile Adrian Bunk
@ 2004-05-16 20:15 ` Adrian Bunk
2004-05-16 20:35 ` [patch] 2.6.6-mm3: remove PC9800 from should-fix Adrian Bunk
` (7 subsequent siblings)
10 siblings, 0 replies; 27+ messages in thread
From: Adrian Bunk @ 2004-05-16 20:15 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
Please review the patch below that removes more PC9800 code from
2.6.6-mm3.
diffstat output:
arch/i386/kernel/i8259.c | 5 -
drivers/char/keyboard.c | 5 -
drivers/ide/ide-proc.c | 1
drivers/net/3c509.c | 45 +++--------------
drivers/net/Space.c | 4 -
drivers/net/at1700.c | 88 ----------------------------------
drivers/pnp/isapnp/core.c | 5 -
drivers/serial/8250_pnp.c | 3 -
include/asm-i386/ide.h | 34 -------------
include/asm-i386/processor.h | 6 --
include/asm-i386/serial.h | 7 --
include/asm-i386/timex.h | 4 -
include/linux/ide.h | 4 -
include/linux/serial_core.h | 8 ---
include/linux/serio.h | 1
sound/core/seq/Makefile | 1
sound/core/seq/instr/Makefile | 1
sound/drivers/mpu401/mpu401.c | 11 ----
sound/drivers/opl3/opl3_lib.c | 20 -------
19 files changed, 15 insertions(+), 238 deletions(-)
additional commands:
rm drivers/char/upd4990a.c
rm drivers/net/ne2k_cbus.{c,h}
cu
Adrian
--- linux-2.6.6-mm3-full/arch/i386/kernel/i8259.c.old 2004-05-16 20:44:27.000000000 +0200
+++ linux-2.6.6-mm3-full/arch/i386/kernel/i8259.c 2004-05-16 20:44:43.000000000 +0200
@@ -317,16 +317,11 @@
* be shot.
*/
-/*
- * =PC9800NOTE= In NEC PC-9800, we use irq8 instead of irq13!
- */
static irqreturn_t math_error_irq(int cpl, void *dev_id, struct pt_regs *regs)
{
extern void math_error(void *);
-#ifndef CONFIG_X86_PC9800
outb(0,0xF0);
-#endif
if (ignore_fpu_irq || !boot_cpu_data.hard_math)
return IRQ_NONE;
math_error((void *)regs->eip);
--- linux-2.6.6-mm3-full/drivers/char/keyboard.c.old 2004-05-16 20:47:33.000000000 +0200
+++ linux-2.6.6-mm3-full/drivers/char/keyboard.c 2004-05-16 20:47:54.000000000 +0200
@@ -52,13 +52,12 @@
/*
* Some laptops take the 789uiojklm,. keys as number pad when NumLock is on.
- * This seems a good reason to start with NumLock off. On PC9800 and HIL keyboards
+ * This seems a good reason to start with NumLock off. On HIL keyboards
* of PARISC machines however there is no NumLock key and everyone expects the keypad
* to be used for numbers.
*/
-#if defined(CONFIG_X86_PC9800) || \
- defined(CONFIG_PARISC) && (defined(CONFIG_KEYBOARD_HIL) || defined(CONFIG_KEYBOARD_HIL_OLD))
+#if defined(CONFIG_PARISC) && (defined(CONFIG_KEYBOARD_HIL) || defined(CONFIG_KEYBOARD_HIL_OLD))
#define KBD_DEFLEDS (1 << VC_NUMLOCK)
#else
#define KBD_DEFLEDS 0
--- linux-2.6.6-mm3-full/drivers/net/3c509.c.old 2004-05-16 20:52:55.000000000 +0200
+++ linux-2.6.6-mm3-full/drivers/net/3c509.c 2004-05-16 20:55:00.000000000 +0200
@@ -56,10 +56,6 @@
v1.19b 08Nov2002 Marc Zyngier <maz@wild-wind.fr.eu.org>
- Introduce driver model for EISA cards.
*/
-/*
- FIXES for PC-9800:
- Shu Iwanaga: 3c569B(PC-9801 C-bus) support
-*/
#define DRV_NAME "3c509"
#define DRV_VERSION "1.19b"
@@ -265,7 +261,7 @@
};
#endif /* CONFIG_MCA */
-#if defined(__ISAPNP__) && !defined(CONFIG_X86_PC9800)
+#if defined(__ISAPNP__)
static struct isapnp_device_id el3_isapnp_adapters[] __initdata = {
{ ISAPNP_ANY_ID, ISAPNP_ANY_ID,
ISAPNP_VENDOR('T', 'C', 'M'), ISAPNP_FUNCTION(0x5090),
@@ -362,7 +358,7 @@
if (lp->pmdev)
pm_unregister(lp->pmdev);
#endif
-#if defined(__ISAPNP__) && !defined(CONFIG_X86_PC9800)
+#if defined(__ISAPNP__)
if (lp->type == EL3_PNP)
pnp_device_detach(to_pnp_dev(lp->dev));
#endif
@@ -381,7 +377,7 @@
u16 phys_addr[3];
static int current_tag;
int err = -ENODEV;
-#if defined(__ISAPNP__) && !defined(CONFIG_X86_PC9800)
+#if defined(__ISAPNP__)
static int pnp_cards;
struct pnp_dev *idev = NULL;
@@ -436,9 +432,6 @@
no_pnp:
#endif /* __ISAPNP__ */
-#ifdef CONFIG_X86_PC9800
- id_port = 0x71d0;
-#else
/* Select an open I/O location at 0x1*0 to do contention select. */
for ( ; id_port < 0x200; id_port += 0x10) {
if (!request_region(id_port, 1, "3c509"))
@@ -456,7 +449,7 @@
printk(" WARNING: No I/O port available for 3c509 activation.\n");
return -ENODEV;
}
-#endif /* CONFIG_X86_PC9800 */
+
/* Next check for all ISA bus boards by sending the ID sequence to the
ID_PORT. We find cards past the first by setting the 'current_tag'
on cards as they are found. Cards with their tag set will not
@@ -487,7 +480,7 @@
phys_addr[i] = htons(id_read_eeprom(i));
}
-#if defined(__ISAPNP__) && !defined(CONFIG_X86_PC9800)
+#if defined(__ISAPNP__)
if (nopnp == 0) {
/* The ISA PnP 3c509 cards respond to the ID sequence.
This check is needed in order not to register them twice. */
@@ -512,19 +505,9 @@
{
unsigned int iobase = id_read_eeprom(8);
if_port = iobase >> 14;
-#ifdef CONFIG_X86_PC9800
- ioaddr = 0x40d0 + ((iobase & 0x1f) << 8);
-#else
ioaddr = 0x200 + ((iobase & 0x1f) << 4);
-#endif
}
irq = id_read_eeprom(9) >> 12;
-#ifdef CONFIG_X86_PC9800
- if (irq == 7)
- irq = 6;
- else if (irq == 15)
- irq = 13;
-#endif
dev = alloc_etherdev(sizeof (struct el3_private));
if (!dev)
@@ -555,11 +538,7 @@
outb(0xd0 + ++current_tag, id_port);
/* Activate the adaptor at the EEPROM location. */
-#ifdef CONFIG_X86_PC9800
- outb((ioaddr >> 8) | 0xe0, id_port);
-#else
outb((ioaddr >> 4) | 0xe0, id_port);
-#endif
EL3WINDOW(0);
if (inw(ioaddr) != 0x6d50)
@@ -568,7 +547,7 @@
/* Free the interrupt so that some other card can use it. */
outw(0x0f00, ioaddr + WN0_IRQ);
-#if defined(__ISAPNP__) && !defined(CONFIG_X86_PC9800)
+#if defined(__ISAPNP__)
found: /* PNP jumps here... */
#endif /* __ISAPNP__ */
@@ -577,7 +556,7 @@
dev->irq = irq;
dev->if_port = if_port;
lp = netdev_priv(dev);
-#if defined(__ISAPNP__) && !defined(CONFIG_X86_PC9800)
+#if defined(__ISAPNP__)
lp->dev = &idev->dev;
#endif
err = el3_common_init(dev);
@@ -601,7 +580,7 @@
return 0;
out1:
-#if defined(__ISAPNP__) && !defined(CONFIG_X86_PC9800)
+#if defined(__ISAPNP__)
if (idev)
pnp_device_detach(idev);
#endif
@@ -1461,12 +1440,6 @@
outw(0x0001, ioaddr + 4);
/* Set the IRQ line. */
-#ifdef CONFIG_X86_PC9800
- if (dev->irq == 6)
- dev->irq = 7;
- else if (dev->irq == 13)
- dev->irq = 15;
-#endif
outw((dev->irq << 12) | 0x0f00, ioaddr + WN0_IRQ);
/* Set the station address in window 2 each time opened. */
@@ -1629,7 +1602,7 @@
MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)");
MODULE_PARM_DESC(xcvr,"transceiver(s) (0=internal, 1=external)");
MODULE_PARM_DESC(max_interrupt_work, "maximum events handled per interrupt");
-#if defined(__ISAPNP__) && !defined(CONFIG_X86_PC9800)
+#if defined(__ISAPNP__)
MODULE_PARM(nopnp, "i");
MODULE_PARM_DESC(nopnp, "disable ISA PnP support (0-1)");
MODULE_DEVICE_TABLE(isapnp, el3_isapnp_adapters);
--- linux-2.6.6-mm3-full/drivers/net/at1700.c.old 2004-05-16 20:57:37.000000000 +0200
+++ linux-2.6.6-mm3-full/drivers/net/at1700.c 2004-05-16 20:59:28.000000000 +0200
@@ -80,17 +80,10 @@
* ISA
*/
-#ifndef CONFIG_X86_PC9800
static unsigned at1700_probe_list[] __initdata = {
0x260, 0x280, 0x2a0, 0x240, 0x340, 0x320, 0x380, 0x300, 0
};
-#else /* CONFIG_X86_PC9800 */
-static unsigned at1700_probe_list[] __initdata = {
- 0x1d6, 0x1d8, 0x1da, 0x1d4, 0xd4, 0xd2, 0xd8, 0xd0, 0
-};
-
-#endif /* CONFIG_X86_PC9800 */
/*
* MCA
*/
@@ -133,7 +126,6 @@
/* Offsets from the base address. */
-#ifndef CONFIG_X86_PC9800
#define STATUS 0
#define TX_STATUS 0
#define RX_STATUS 1
@@ -161,34 +153,6 @@
#define RESET 31 /* Write to reset some parts of the chip. */
#define AT1700_IO_EXTENT 32
#define PORT_OFFSET(o) (o)
-#else /* CONFIG_X86_PC9800 */
-#define STATUS (0x0000)
-#define TX_STATUS (0x0000)
-#define RX_STATUS (0x0001)
-#define TX_INTR (0x0200)/* Bit-mapped interrupt enable registers. */
-#define RX_INTR (0x0201)
-#define TX_MODE (0x0400)
-#define RX_MODE (0x0401)
-#define CONFIG_0 (0x0600)/* Misc. configuration settings. */
-#define CONFIG_1 (0x0601)
-/* Run-time register bank 2 definitions. */
-#define DATAPORT (0x0800)/* Word-wide DMA or programmed-I/O dataport. */
-#define TX_START (0x0a00)
-#define COL16CNTL (0x0a01)/* Controll Reg for 16 collisions */
-#define MODE13 (0x0c01)
-#define RX_CTRL (0x0e00)
-/* Configuration registers only on the '865A/B chips. */
-#define EEPROM_Ctrl (0x1000)
-#define EEPROM_Data (0x1200)
-#define CARDSTATUS 16 /* FMV-18x Card Status */
-#define CARDSTATUS1 17 /* FMV-18x Card Status */
-#define IOCONFIG (0x1400)/* Either read the jumper, or move the I/O. */
-#define IOCONFIG1 (0x1600)
-#define SAPROM 20 /* The station address PROM, if no EEPROM. */
-#define MODE24 (0x1800)/* The station address PROM, if no EEPROM. */
-#define RESET (0x1e01)/* Write to reset some parts of the chip. */
-#define PORT_OFFSET(o) ({ int _o_ = (o); (_o_ & ~1) * 0x100 + (_o_ & 1); })
-#endif /* CONFIG_X86_PC9800 */
#define TX_TIMEOUT 10
@@ -230,11 +194,7 @@
(detachable devices only).
*/
-#ifndef CONFIG_X86_PC9800
static int io = 0x260;
-#else
-static int io = 0xd0;
-#endif
static int irq;
@@ -246,15 +206,7 @@
mca_mark_as_unused(lp->mca_slot);
#endif
free_irq(dev->irq, NULL);
-#ifndef CONFIG_X86_PC9800
release_region(dev->base_addr, AT1700_IO_EXTENT);
-#else
- {
- int i;
- for (i = 0; i < 0x2000; i += 0x200)
- release_region(dev->base_addr + i, 2);
- }
-#endif
}
struct net_device * __init at1700_probe(int unit)
@@ -321,20 +273,8 @@
int slot, ret = -ENODEV;
struct net_local *lp = netdev_priv(dev);
-#ifndef CONFIG_X86_PC9800
if (!request_region(ioaddr, AT1700_IO_EXTENT, dev->name))
return -EBUSY;
-#else
- for (i = 0; i < 0x2000; i += 0x0200) {
- if (!request_region(ioaddr + i, 2, dev->name)) {
- while (i > 0) {
- i -= 0x0200;
- release_region(ioaddr + i, 2);
- }
- return -EBUSY;
- }
- }
-#endif
/* Resetting the chip doesn't reset the ISA interface, so don't bother.
That means we have to be careful with the register values we probe
@@ -425,15 +365,8 @@
outb(0, ioaddr + RESET);
if (is_at1700) {
-#ifndef CONFIG_X86_PC9800
irq = at1700_irqmap[(read_eeprom(ioaddr, 12)&0x04)
| (read_eeprom(ioaddr, 0)>>14)];
-#else
- {
- char re1000plus_irqmap[4] = {3, 5, 6, 12};
- irq = re1000plus_irqmap[inb(ioaddr + IOCONFIG1) >> 6];
- }
-#endif
} else {
/* Check PnP mode for FMV-183/184/183A/184A. */
/* This PnP routine is very poor. IO and IRQ should be known. */
@@ -517,11 +450,7 @@
/* Switch to bank 2 */
/* Lock our I/O address, and set manual processing mode for 16 collisions. */
outb(0x08, ioaddr + CONFIG_1);
-#ifndef CONFIG_X86_PC9800
outb(dev->if_port, ioaddr + MODE13);
-#else
- outb(0, ioaddr + MODE13);
-#endif
outb(0x00, ioaddr + COL16CNTL);
if (net_debug)
@@ -552,12 +481,7 @@
return 0;
err_out:
-#ifndef CONFIG_X86_PC9800
release_region(ioaddr, AT1700_IO_EXTENT);
-#else
- for (i = 0; i < 0x2000; i += 0x0200)
- release_region(ioaddr + i, 2);
-#endif
return ret;
}
@@ -568,13 +492,6 @@
#define EE_DATA_WRITE 0x80 /* EEPROM chip data in, in reg. 17. */
#define EE_DATA_READ 0x80 /* EEPROM chip data out, in reg. 17. */
-/* Delay between EEPROM clock transitions. */
-#ifndef CONFIG_X86_PC9800
-#define eeprom_delay() do { } while (0)
-#else
-#define eeprom_delay() __asm__ ("out%B0 %%al,%0" :: "N"(0x5f))
-#endif
-
/* The EEPROM commands include the alway-set leading bit. */
#define EE_WRITE_CMD (5 << 6)
#define EE_READ_CMD (6 << 6)
@@ -593,22 +510,17 @@
short dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
outb(EE_CS, ee_addr);
outb(dataval, ee_daddr);
- eeprom_delay();
outb(EE_CS | EE_SHIFT_CLK, ee_addr); /* EEPROM clock tick. */
- eeprom_delay();
}
outb(EE_DATA_WRITE, ee_daddr);
for (i = 16; i > 0; i--) {
outb(EE_CS, ee_addr);
- eeprom_delay();
outb(EE_CS | EE_SHIFT_CLK, ee_addr);
- eeprom_delay();
retval = (retval << 1) | ((inb(ee_daddr) & EE_DATA_READ) ? 1 : 0);
}
/* Terminate the EEPROM access. */
outb(EE_CS, ee_addr);
- eeprom_delay();
outb(EE_SHIFT_CLK, ee_addr);
outb(0, ee_addr);
return retval;
--- linux-2.6.6-mm3-full/drivers/serial/8250_pnp.c.old 2004-05-16 21:00:34.000000000 +0200
+++ linux-2.6.6-mm3-full/drivers/serial/8250_pnp.c 2004-05-16 21:00:48.000000000 +0200
@@ -361,9 +361,6 @@
((port->min == 0x2f8) ||
(port->min == 0x3f8) ||
(port->min == 0x2e8) ||
-#ifdef CONFIG_X86_PC9800
- (port->min == 0x8b0) ||
-#endif
(port->min == 0x3e8)))
return 1;
}
--- linux-2.6.6-mm3-full/drivers/pnp/isapnp/core.c.old 2004-05-16 21:01:18.000000000 +0200
+++ linux-2.6.6-mm3-full/drivers/pnp/isapnp/core.c 2004-05-16 21:01:29.000000000 +0200
@@ -68,13 +68,8 @@
MODULE_PARM_DESC(isapnp_verbose, "ISA Plug & Play verbose mode");
MODULE_LICENSE("GPL");
-#ifdef CONFIG_X86_PC9800
-#define _PIDXR 0x259
-#define _PNPWRP 0xa59
-#else
#define _PIDXR 0x279
#define _PNPWRP 0xa79
-#endif
/* short tags */
#define _STAG_PNPVERNO 0x01
--- linux-2.6.6-mm3-full/include/linux/serial_core.h.old 2004-05-16 21:02:32.000000000 +0200
+++ linux-2.6.6-mm3-full/include/linux/serial_core.h 2004-05-16 21:02:41.000000000 +0200
@@ -59,14 +59,6 @@
/* NEC v850. */
#define PORT_V850E_UART 40
-/* NEC PC-9800 */
-#define PORT_8251_PC98 41
-#define PORT_19K_PC98 42
-#define PORT_FIFO_PC98 43
-#define PORT_VFAST_PC98 44
-#define PORT_PC9861 45
-#define PORT_PC9801_101 46
-
/* DZ */
#define PORT_DZ 47
--- linux-2.6.6-mm3-full/include/linux/ide.h.old 2004-05-16 21:03:29.000000000 +0200
+++ linux-2.6.6-mm3-full/include/linux/ide.h 2004-05-16 21:04:21.000000000 +0200
@@ -255,7 +255,7 @@
ide_pdc4030, ide_rz1000, ide_trm290,
ide_cmd646, ide_cy82c693, ide_4drives,
ide_pmac, ide_etrax100, ide_acorn,
- ide_pc9800, ide_forced
+ ide_forced
} hwif_chipset_t;
/*
@@ -308,7 +308,7 @@
/*
* ide_init_hwif_ports() is OBSOLETE and will be removed in 2.7 series.
*
- * arm26, arm, h8300, m68k, m68knommu (broken) and i386-pc9800 (broken)
+ * arm26, arm, h8300, m68k and m68knommu (broken)
* still have their own versions.
*/
#if !defined(CONFIG_ARM) && !defined(CONFIG_H8300) && !defined(CONFIG_M68K)
--- linux-2.6.6-mm3-full/include/linux/serio.h.old 2004-05-16 21:04:58.000000000 +0200
+++ linux-2.6.6-mm3-full/include/linux/serio.h 2004-05-16 21:05:16.000000000 +0200
@@ -105,7 +105,6 @@
#define SERIO_8042 0x01000000UL
#define SERIO_RS232 0x02000000UL
#define SERIO_HIL_MLC 0x03000000UL
-#define SERIO_PC9800 0x04000000UL
#define SERIO_PS_PSTHRU 0x05000000UL
#define SERIO_8042_XL 0x06000000UL
--- linux-2.6.6-mm3-full/include/asm-i386/ide.h.old 2004-05-16 21:06:58.000000000 +0200
+++ linux-2.6.6-mm3-full/include/asm-i386/ide.h 2004-05-16 21:07:22.000000000 +0200
@@ -26,9 +26,6 @@
static __inline__ int ide_default_irq(unsigned long base)
{
switch (base) {
-#ifdef CONFIG_X86_PC9800
- case 0x640: return 9;
-#endif
case 0x1f0: return 14;
case 0x170: return 15;
case 0x1e8: return 11;
@@ -43,48 +40,17 @@
static __inline__ unsigned long ide_default_io_base(int index)
{
switch (index) {
-#ifdef CONFIG_X86_PC9800
- case 0:
- case 1: return 0x640;
-#else
case 0: return 0x1f0;
case 1: return 0x170;
case 2: return 0x1e8;
case 3: return 0x168;
case 4: return 0x1e0;
case 5: return 0x160;
-#endif
default:
return 0;
}
}
-#ifdef CONFIG_X86_PC9800
-static __inline__ void ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port,
- unsigned long ctrl_port, int *irq)
-{
- unsigned long reg = data_port;
- int i;
-
- unsigned long increment = data_port == 0x640 ? 2 : 1;
-
- for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
- hw->io_ports[i] = reg;
- reg += increment;
- }
- if (ctrl_port) {
- hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port;
- } else if (data_port == 0x640) {
- hw->io_ports[IDE_CONTROL_OFFSET] = 0x74c;
- } else {
- hw->io_ports[IDE_CONTROL_OFFSET] = hw->io_ports[IDE_DATA_OFFSET] + 0x206;
- }
- if (irq != NULL)
- *irq = 0;
- hw->io_ports[IDE_IRQ_OFFSET] = 0;
-}
-#endif
-
#ifdef CONFIG_BLK_DEV_IDEPCI
#define ide_init_default_irq(base) (0)
#else
--- linux-2.6.6-mm3-full/include/asm-i386/timex.h.old 2004-05-16 21:08:10.000000000 +0200
+++ linux-2.6.6-mm3-full/include/asm-i386/timex.h 2004-05-16 21:08:26.000000000 +0200
@@ -9,15 +9,11 @@
#include <linux/config.h>
#include <asm/msr.h>
-#ifdef CONFIG_X86_PC9800
- extern int CLOCK_TICK_RATE;
-#else
#ifdef CONFIG_X86_ELAN
# define CLOCK_TICK_RATE 1189200 /* AMD Elan has different frequency! */
#else
# define CLOCK_TICK_RATE 1193182 /* Underlying HZ */
#endif
-#endif
#define CLOCK_TICK_FACTOR 20 /* Factor of both 1000000 and CLOCK_TICK_RATE */
#define FINETUNE ((((((long)LATCH * HZ - CLOCK_TICK_RATE) << SHIFT_HZ) * \
--- linux-2.6.6-mm3-full/include/asm-i386/serial.h.old 2004-05-16 21:08:46.000000000 +0200
+++ linux-2.6.6-mm3-full/include/asm-i386/serial.h 2004-05-16 21:08:59.000000000 +0200
@@ -47,19 +47,12 @@
#define C_P(card,port) (((card)<<6|(port)<<3) + 1)
-#ifndef CONFIG_X86_PC9800
#define STD_SERIAL_PORT_DEFNS \
/* UART CLK PORT IRQ FLAGS */ \
{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \
{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \
{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \
{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */
-#else
-#define STD_SERIAL_PORT_DEFNS \
- /* UART CLK PORT IRQ FLAGS */ \
- { 0, BASE_BAUD, 0x30, 4, STD_COM_FLAGS }, /* ttyS0 */ \
- { 0, BASE_BAUD, 0x238, 5, STD_COM_FLAGS }, /* ttyS1 */
-#endif /* CONFIG_X86_PC9800 */
#ifdef CONFIG_SERIAL_MANY_PORTS
--- linux-2.6.6-mm3-full/sound/drivers/mpu401/mpu401.c.old 2004-05-16 21:09:36.000000000 +0200
+++ linux-2.6.6-mm3-full/sound/drivers/mpu401/mpu401.c 2004-05-16 21:09:59.000000000 +0200
@@ -52,9 +52,6 @@
#endif
static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* MPU-401 port number */
static int irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; /* MPU-401 IRQ */
-#ifdef CONFIG_X86_PC9800
-static int pc98ii[SNDRV_CARDS]; /* PC98-II dauther board */
-#endif
static int boot_devs;
module_param_array(index, int, boot_devs, 0444);
@@ -77,11 +74,6 @@
module_param_array(irq, int, boot_devs, 0444);
MODULE_PARM_DESC(irq, "IRQ # for MPU-401 device.");
MODULE_PARM_SYNTAX(irq, SNDRV_IRQ_DESC);
-#ifdef CONFIG_X86_PC9800
-module_param_array(pc98ii, bool, boot_devs, 0444);
-MODULE_PARM_DESC(pc98ii, "Roland MPU-PC98II support.");
-MODULE_PARM_SYNTAX(pc98ii, SNDRV_BOOLEAN_FALSE_DESC);
-#endif
#ifndef CONFIG_ACPI_BUS
struct acpi_device;
@@ -188,9 +180,6 @@
}
#endif
if (snd_mpu401_uart_new(card, 0,
-#ifdef CONFIG_X86_PC9800
- pc98ii[dev] ? MPU401_HW_PC98II :
-#endif
MPU401_HW_MPU401,
port[dev], 0,
irq[dev], irq[dev] >= 0 ? SA_INTERRUPT : 0, NULL) < 0) {
--- linux-2.6.6-mm3-full/sound/core/seq/instr/Makefile.old 2004-05-16 21:15:58.000000000 +0200
+++ linux-2.6.6-mm3-full/sound/core/seq/instr/Makefile 2004-05-16 21:16:06.000000000 +0200
@@ -26,7 +26,6 @@
obj-$(call sequencer,$(CONFIG_SND_AD1816A)) += snd-ainstr-fm.o
obj-$(call sequencer,$(CONFIG_SND_CS4232)) += snd-ainstr-fm.o
obj-$(call sequencer,$(CONFIG_SND_CS4236)) += snd-ainstr-fm.o
-obj-$(call sequencer,$(CONFIG_SND_PC98_CS4232)) += snd-ainstr-fm.o
obj-$(call sequencer,$(CONFIG_SND_ES1688)) += snd-ainstr-fm.o
obj-$(call sequencer,$(CONFIG_SND_GUSCLASSIC)) += snd-ainstr-iw.o snd-ainstr-gf1.o snd-ainstr-simple.o
obj-$(call sequencer,$(CONFIG_SND_GUSMAX)) += snd-ainstr-iw.o snd-ainstr-gf1.o snd-ainstr-simple.o
--- linux-2.6.6-mm3-full/sound/core/seq/Makefile.old 2004-05-16 21:16:37.000000000 +0200
+++ linux-2.6.6-mm3-full/sound/core/seq/Makefile 2004-05-16 21:16:54.000000000 +0200
@@ -51,7 +51,6 @@
obj-$(call sequencer,$(CONFIG_SND_CS4231)) += $(RAWMIDI_OBJS)
obj-$(call sequencer,$(CONFIG_SND_CS4232)) += $(RAWMIDI_OBJS) $(OPL3_OBJS)
obj-$(call sequencer,$(CONFIG_SND_CS4236)) += $(RAWMIDI_OBJS) $(OPL3_OBJS)
-obj-$(call sequencer,$(CONFIG_SND_PC98_CS4232)) += $(RAWMIDI_OBJS) $(OPL3_OBJS)
obj-$(call sequencer,$(CONFIG_SND_ES1688)) += $(RAWMIDI_OBJS) $(OPL3_OBJS)
obj-$(call sequencer,$(CONFIG_SND_GUSCLASSIC)) += $(RAWMIDI_OBJS) $(OPL3_OBJS)
obj-$(call sequencer,$(CONFIG_SND_GUSMAX)) += $(RAWMIDI_OBJS) $(OPL3_OBJS)
--- linux-2.6.6-mm3-full/sound/drivers/opl3/opl3_lib.c.old 2004-05-16 21:17:16.000000000 +0200
+++ linux-2.6.6-mm3-full/sound/drivers/opl3/opl3_lib.c 2004-05-16 21:17:42.000000000 +0200
@@ -416,26 +416,6 @@
case OPL3_HW_OPL3_FM801:
opl3->command = &snd_opl3_command;
break;
- case OPL3_HW_OPL3_PC98:
- opl3->command = &snd_opl3_command;
-
- /* Initialize? */
- opl3->command(opl3, OPL3_RIGHT | 0x05, 0x05);
- opl3->command(opl3, OPL3_RIGHT | 0x08, 0x04);
- opl3->command(opl3, OPL3_RIGHT | 0x08, 0x00);
- opl3->command(opl3, OPL3_LEFT | 0xf7, 0x00);
- opl3->command(opl3, OPL3_LEFT | 0x04, 0x60);
- opl3->command(opl3, OPL3_LEFT | 0x04, 0x80);
- inb(opl3->l_port);
-
- opl3->command(opl3, OPL3_LEFT | 0x02, 0xff);
- opl3->command(opl3, OPL3_LEFT | 0x04, 0x21);
- inb(opl3->l_port);
-
- opl3->command(opl3, OPL3_LEFT | 0x04, 0x60);
- opl3->command(opl3, OPL3_LEFT | 0x04, 0x80);
-
- break;
case OPL3_HW_OPL3_CS4281:
opl3->command = &snd_opl3_cs4281_command;
break;
--- linux-2.6.6-mm3-full/drivers/ide/ide-proc.c.old 2004-05-16 21:19:18.000000000 +0200
+++ linux-2.6.6-mm3-full/drivers/ide/ide-proc.c 2004-05-16 21:19:26.000000000 +0200
@@ -352,7 +352,6 @@
case ide_cy82c693: name = "cy82c693"; break;
case ide_4drives: name = "4drives"; break;
case ide_pmac: name = "mac-io"; break;
- case ide_pc9800: name = "pc9800"; break;
default: name = "(unknown)"; break;
}
len = sprintf(page, "%s\n", name);
--- linux-2.6.6-mm3-full/include/asm-i386/processor.h.old 2004-05-16 21:06:16.000000000 +0200
+++ linux-2.6.6-mm3-full/include/asm-i386/processor.h 2004-05-16 21:24:19.000000000 +0200
@@ -259,14 +259,8 @@
/*
* Bus types (default is ISA, but people can check others with these..)
- * pc98 indicates PC98 systems (CBUS)
*/
extern int MCA_bus;
-#ifdef CONFIG_X86_PC9800
-#define pc98 1
-#else
-#define pc98 0
-#endif
static inline void __monitor(const void *eax, unsigned long ecx,
unsigned long edx)
--- linux-2.6.6-mm3-full/drivers/net/Space.c.old 2004-05-16 21:10:30.000000000 +0200
+++ linux-2.6.6-mm3-full/drivers/net/Space.c 2004-05-16 21:52:37.000000000 +0200
@@ -191,8 +191,8 @@
#ifdef CONFIG_E2100 /* Cabletron E21xx series. */
{e2100_probe, 0},
#endif
-#if defined(CONFIG_NE2000) || defined(CONFIG_NE2K_CBUS) || \
- defined(CONFIG_NE_H8300) /* ISA & PC-9800 CBUS (use ne2k-pci for PCI cards) */
+#if defined(CONFIG_NE2000) || \
+ defined(CONFIG_NE_H8300) /* ISA (use ne2k-pci for PCI cards) */
{ne_probe, 0},
#endif
#ifdef CONFIG_LANCE /* ISA/VLB (use pcnet32 for PCI cards) */
^ permalink raw reply [flat|nested] 27+ messages in thread
* [patch] 2.6.6-mm3: remove PC9800 from should-fix
2004-05-16 9:55 2.6.6-mm3 Andrew Morton
` (2 preceding siblings ...)
2004-05-16 20:15 ` [patch] 2.6.6-mm3: more PC9800 removal Adrian Bunk
@ 2004-05-16 20:35 ` Adrian Bunk
2004-05-17 11:52 ` 2.6.6-mm3 Eric W. Biederman
` (6 subsequent siblings)
10 siblings, 0 replies; 27+ messages in thread
From: Adrian Bunk @ 2004-05-16 20:35 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
PC9800 gets removed.
cu
Adrian
--- linux-2.6.6-mm3-full/Documentation/should-fix.txt.old 2004-05-16 22:34:03.000000000 +0200
+++ linux-2.6.6-mm3-full/Documentation/should-fix.txt 2004-05-16 22:34:18.000000000 +0200
@@ -404,10 +404,6 @@
arch/i386/
~~~~~~~~~~
-o Also PC9800 merge needs finishing to the point we want for 2.6 (not all).
-
- PRI3
-
o davej: PAT support (for mtrr exhaustion w/ AGP)
PRI2
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.6-mm3
2004-05-16 9:55 2.6.6-mm3 Andrew Morton
` (3 preceding siblings ...)
2004-05-16 20:35 ` [patch] 2.6.6-mm3: remove PC9800 from should-fix Adrian Bunk
@ 2004-05-17 11:52 ` Eric W. Biederman
2004-05-17 12:57 ` 2.6.6-mm3 Aristeu Sergio Rozanski Filho
` (5 subsequent siblings)
10 siblings, 0 replies; 27+ messages in thread
From: Eric W. Biederman @ 2004-05-17 11:52 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, fastboot
Ahh... This almost worked. We now have sys_kexec_load reserved on all
architectures except x86.
It looks like Randy Dunlap generated an incremental patch to reserve the
syscall on other architectures, and you treated it as an update.
Eric
Andrew Morton <akpm@osdl.org> writes:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.6/2.6.6-mm3/
> -kexec-reserve-syscall-slot.patch
> +kexec-reserve-syscall-slot.patch
>
> Reserve the kexec syscall slot on supported architectures.
> kexec-reserve-syscall-slot.patch
> reserve syscall slots for kexec
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.6-mm3
2004-05-16 9:55 2.6.6-mm3 Andrew Morton
` (4 preceding siblings ...)
2004-05-17 11:52 ` 2.6.6-mm3 Eric W. Biederman
@ 2004-05-17 12:57 ` Aristeu Sergio Rozanski Filho
2004-05-17 15:06 ` 2.6.6-mm3 Robert Picco
2004-05-17 13:09 ` Scroll wheel on PS/2 Logitech MouseMan Wheel no longer works (was Re: 2.6.6-mm3) Sean Neakums
` (4 subsequent siblings)
10 siblings, 1 reply; 27+ messages in thread
From: Aristeu Sergio Rozanski Filho @ 2004-05-17 12:57 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 155 bytes --]
Hi Andrew,
> +hpet-driver.patch
>
> HPET clock driver (needs work)
this doesn't compiles if ACPI isn't present. patch attached.
--
Aristeu
[-- Attachment #2: hpet-acpi.patch --]
[-- Type: text/plain, Size: 947 bytes --]
diff -uprN -X dontdiff 2.6-mm-clean/drivers/char/hpet.c 2.6-mm/drivers/char/hpet.c
--- 2.6-mm-clean/drivers/char/hpet.c 2004-05-17 09:38:03.000000000 -0300
+++ 2.6-mm/drivers/char/hpet.c 2004-05-17 09:23:04.000000000 -0300
@@ -976,6 +976,7 @@ hpet_alloc (struct hpet_data *hdp)
return 0;
}
+#ifdef ACPI
static acpi_status __init
hpet_resources (struct acpi_resource *res, void *data)
{
@@ -1056,7 +1057,10 @@ static struct acpi_driver hpet_acpi_driv
.remove = hpet_acpi_remove,
},
};
-
+#else /* ACPI */
+#define acpi_bus_register_driver(x) do {} while(0)
+#define acpi_bus_unregister_driver(x) do {} while(0)
+#endif /* ACPI */
static int __init
@@ -1067,7 +1071,7 @@ hpet_init (void)
if (hpets)
hpet_post_platform();
- (void) acpi_bus_register_driver(&hpet_acpi_driver);
+ acpi_bus_register_driver(&hpet_acpi_driver);
if (hpets) {
entry = create_proc_entry("driver/hpet", 0, 0);
^ permalink raw reply [flat|nested] 27+ messages in thread
* Scroll wheel on PS/2 Logitech MouseMan Wheel no longer works (was Re: 2.6.6-mm3)
2004-05-16 9:55 2.6.6-mm3 Andrew Morton
` (5 preceding siblings ...)
2004-05-17 12:57 ` 2.6.6-mm3 Aristeu Sergio Rozanski Filho
@ 2004-05-17 13:09 ` Sean Neakums
2004-05-17 18:10 ` Dmitry Torokhov
2004-05-17 16:14 ` 2.6.6-mm3 Tom Rini
` (3 subsequent siblings)
10 siblings, 1 reply; 27+ messages in thread
From: Sean Neakums @ 2004-05-17 13:09 UTC (permalink / raw)
To: Andrew Morton; +Cc: vojtech, linux-kernel
Andrew Morton <akpm@osdl.org> writes:
> bk-input.patch
I'm guessing this patch contains the changes responsible.
As with 2.6.6-mm2 (and before, from a quick grep of
/var/log/messages), the mouse is detected as
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImExPS/2 Logitech Wheel Mouse on isa0060/serio1
but moving the wheel causes the pointer to make large jumps toward the
top-right corner.
When I boot with psmouse.proto=imps, it is detected as below and works
as before.
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
In case it's relevant, the mouse is connected through a KVM switch.
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.6-mm3
2004-05-17 12:57 ` 2.6.6-mm3 Aristeu Sergio Rozanski Filho
@ 2004-05-17 15:06 ` Robert Picco
2004-05-17 15:51 ` 2.6.6-mm3 Aristeu Sergio Rozanski Filho
0 siblings, 1 reply; 27+ messages in thread
From: Robert Picco @ 2004-05-17 15:06 UTC (permalink / raw)
To: Aristeu Sergio Rozanski Filho; +Cc: Andrew Morton, linux-kernel
Aristeu Sergio Rozanski Filho wrote:
>Hi Andrew,
>
>
>
>>+hpet-driver.patch
>>
>> HPET clock driver (needs work)
>>
>>
>this doesn't compiles if ACPI isn't present. patch attached.
>
>
>
So you have HPET hardware which can be discovered without ACPI? How is
the HPET detected? Are you just using the HPET addresses documented for
Southbridge?
thanks,
Bob
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.6-mm3
2004-05-17 15:06 ` 2.6.6-mm3 Robert Picco
@ 2004-05-17 15:51 ` Aristeu Sergio Rozanski Filho
0 siblings, 0 replies; 27+ messages in thread
From: Aristeu Sergio Rozanski Filho @ 2004-05-17 15:51 UTC (permalink / raw)
To: Robert Picco; +Cc: Andrew Morton, linux-kernel
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
> >>+hpet-driver.patch
> >>
> >>HPET clock driver (needs work)
> >>
> >>
> >this doesn't compiles if ACPI isn't present. patch attached.
> >
> >
> >
> So you have HPET hardware which can be discovered without ACPI? How is
nope, I don't have any hw with HPET.
> the HPET detected? Are you just using the HPET addresses documented for
> Southbridge?
then this should be done instead:
- --- 2.6-mm-clean/drivers/char/Kconfig 2004-05-17 09:38:03.000000000 -0300
+++ 2.6-mm/drivers/char/Kconfig 2004-05-17 12:52:16.000000000 -0300
@@ -940,6 +940,7 @@ config RAW_DRIVER
config HPET
bool "HPET - High Precision Event Timer"
default n
+ depends on ACPI
help
If you say Y here, you will have a device named "/dev/hpet/XX" for
each timer supported by the HPET. The timers are
- --
Aristeu
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)
iD8DBQFAqN+IRRJOudsVYbMRAgeuAKCCK5zZHhRDoV2ZsdXfhewo7aKKBwCgiO0u
btq6DvF9SkZUpbAD3d9gg14=
=AxUi
-----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.6-mm3
2004-05-16 9:55 2.6.6-mm3 Andrew Morton
` (6 preceding siblings ...)
2004-05-17 13:09 ` Scroll wheel on PS/2 Logitech MouseMan Wheel no longer works (was Re: 2.6.6-mm3) Sean Neakums
@ 2004-05-17 16:14 ` Tom Rini
2004-05-17 16:30 ` 2.6.6-mm3 Robert Picco
2004-05-17 17:20 ` 2.6.6-mm3 Chris Wright
` (2 subsequent siblings)
10 siblings, 1 reply; 27+ messages in thread
From: Tom Rini @ 2004-05-17 16:14 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
On Sun, May 16, 2004 at 02:55:14AM -0700, Andrew Morton wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.6/2.6.6-mm3/
>
> - A few VM changes, getting things synced up better with Andrea's work.
>
> - A new kgdb stub, for ia64 (what happened to the grand unified kgdb
> project?)
No one asked the ia64 folks who did that work "Hey, have you looked at
the grand unified kgdb project on kgdb.sf.net ?" would be my guess.
Having said that, if you're willing to go with a slightly late
initalizing (I saw part of the early_param work get dropped again I
think, so I'm gonna guess you don't wanna deal with that again yet) KGDB
for i386 and PPC32, I can whip something up vs 2.6.6 in a day or so.
--
Tom Rini
http://gate.crashing.org/~trini/
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.6-mm3
2004-05-17 16:14 ` 2.6.6-mm3 Tom Rini
@ 2004-05-17 16:30 ` Robert Picco
2004-05-17 16:38 ` 2.6.6-mm3 Tom Rini
0 siblings, 1 reply; 27+ messages in thread
From: Robert Picco @ 2004-05-17 16:30 UTC (permalink / raw)
To: Tom Rini; +Cc: Andrew Morton, linux-kernel
Tom Rini wrote:
>On Sun, May 16, 2004 at 02:55:14AM -0700, Andrew Morton wrote:
>
>
>
>>ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.6/2.6.6-mm3/
>>
>>- A few VM changes, getting things synced up better with Andrea's work.
>>
>>- A new kgdb stub, for ia64 (what happened to the grand unified kgdb
>> project?)
>>
>>
>
>No one asked the ia64 folks who did that work "Hey, have you looked at
>the grand unified kgdb project on kgdb.sf.net ?" would be my guess.
>
>Having said that, if you're willing to go with a slightly late
>initalizing (I saw part of the early_param work get dropped again I
>think, so I'm gonna guess you don't wanna deal with that again yet) KGDB
>for i386 and PPC32, I can whip something up vs 2.6.6 in a day or so.
>
>
I did the ia64 port and started with Andrew's 2.6.4-mm2 i386 sources.
I'm assuming the long term strategy is to move to a unified kgdb being
done on sourceforge? If so, I'll take a look at this.
thanks
Bob
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.6-mm3: USB console.c doesn't compile
2004-05-16 18:38 ` 2.6.6-mm3: USB console.c doesn't compile Adrian Bunk
@ 2004-05-17 16:32 ` Greg KH
0 siblings, 0 replies; 27+ messages in thread
From: Greg KH @ 2004-05-17 16:32 UTC (permalink / raw)
To: Adrian Bunk; +Cc: Andrew Morton, linux-kernel
On Sun, May 16, 2004 at 08:38:49PM +0200, Adrian Bunk wrote:
> The following compile error comes from Linus' tree:
>
> <-- snip -->
>
> ...
> CC drivers/usb/serial/console.o
> drivers/usb/serial/console.c: In function `usb_console_setup':
> drivers/usb/serial/console.c:140: warning: implicit declaration of function `serial_paranoia_check'
> ...
> LD .tmp_vmlinux1
> drivers/built-in.o(.init.text+0x698c8): In function `usb_console_setup':
> : undefined reference to `serial_paranoia_check'
> make: *** [.tmp_vmlinux1] Error 1
Oops, forgot that one, sorry. Here's a patch that fixes it, and I'll
forward it on to Linus later today.
thanks,
greg k-h
diff -Nru a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
--- a/drivers/usb/serial/console.c Mon May 17 09:31:11 2004
+++ b/drivers/usb/serial/console.c Mon May 17 09:31:11 2004
@@ -137,7 +137,7 @@
/* grab the first serial port that happens to be connected */
serial = usb_serial_get_by_index(0);
- if (serial_paranoia_check (serial, __FUNCTION__)) {
+ if (serial == NULL) {
/* no device is connected yet, sorry :( */
err ("No USB device connected to ttyUSB0");
return -ENODEV;
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.6-mm3
2004-05-17 16:30 ` 2.6.6-mm3 Robert Picco
@ 2004-05-17 16:38 ` Tom Rini
2004-05-17 17:56 ` 2.6.6-mm3 Tom Rini
0 siblings, 1 reply; 27+ messages in thread
From: Tom Rini @ 2004-05-17 16:38 UTC (permalink / raw)
To: Robert Picco; +Cc: Andrew Morton, linux-kernel
On Mon, May 17, 2004 at 12:30:25PM -0400, Robert Picco wrote:
> Tom Rini wrote:
>
> >On Sun, May 16, 2004 at 02:55:14AM -0700, Andrew Morton wrote:
> >
> >
> >
> >>ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.6/2.6.6-mm3/
> >>
> >>- A few VM changes, getting things synced up better with Andrea's work.
> >>
> >>- A new kgdb stub, for ia64 (what happened to the grand unified kgdb
> >> project?)
> >>
> >>
> >
> >No one asked the ia64 folks who did that work "Hey, have you looked at
> >the grand unified kgdb project on kgdb.sf.net ?" would be my guess.
> >
> >Having said that, if you're willing to go with a slightly late
> >initalizing (I saw part of the early_param work get dropped again I
> >think, so I'm gonna guess you don't wanna deal with that again yet) KGDB
> >for i386 and PPC32, I can whip something up vs 2.6.6 in a day or so.
>
> I did the ia64 port and started with Andrew's 2.6.4-mm2 i386 sources.
> I'm assuming the long term strategy is to move to a unified kgdb being
> done on sourceforge? If so, I'll take a look at this.
My long term strategy is to get everyone using the version on
sourceforge that splits out the common portions of the stub from the
arch-specific portions. If you could go ahead and get ia64 working on
this as well I'd appreciate it.
Right now it's still vs 2.6.5, but I'm going to try and fix that today
or tomorrow to be vs 2.6.6.
--
Tom Rini
http://gate.crashing.org/~trini/
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.6-mm3
2004-05-16 9:55 2.6.6-mm3 Andrew Morton
` (7 preceding siblings ...)
2004-05-17 16:14 ` 2.6.6-mm3 Tom Rini
@ 2004-05-17 17:20 ` Chris Wright
2004-05-17 17:42 ` [PATCH][PPC32] Update Motorola LoPEC and Sandpoint defconfigs Tom Rini
2004-05-18 2:08 ` 2.6.6-mm3: i810 agpgart module can't be initialized Clemens Schwaighofer
10 siblings, 0 replies; 27+ messages in thread
From: Chris Wright @ 2004-05-17 17:20 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
* Andrew Morton (akpm@osdl.org) wrote:
> idr-overflow-fixes.patch
> Fixes for idr code
> idr-overflow-fixes fix
> More fixes for idr code
> Fixes for POSIX timers
> timers-signals-rlimits-setuid-fix
> timers-signals-rlimits-fix
> timers-signals-rlimits-rename-stuff
> idr-overflow-fixes fix
> More fixes for idr code
I think the comments are a bit stale w.r.t. this patch. It doesn't
actually touch the rlimits any longer.
thanks,
-chris
--
Linux Security Modules http://lsm.immunix.org http://lsm.bkbits.net
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH][PPC32] Update Motorola LoPEC and Sandpoint defconfigs
2004-05-16 9:55 2.6.6-mm3 Andrew Morton
` (8 preceding siblings ...)
2004-05-17 17:20 ` 2.6.6-mm3 Chris Wright
@ 2004-05-17 17:42 ` Tom Rini
2004-05-17 17:54 ` [PATCH][PPC32] Remove 'mem_pieces_append' Tom Rini
2004-05-18 2:08 ` 2.6.6-mm3: i810 agpgart module can't be initialized Clemens Schwaighofer
10 siblings, 1 reply; 27+ messages in thread
From: Tom Rini @ 2004-05-17 17:42 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
Update the Motorola LoPEC and Sandpoint config files.
arch/ppc/configs/lopec_defconfig | 567 +++++++++++++++++------------------
arch/ppc/configs/sandpoint_defconfig | 553 ++++++++++++++--------------------
2 files changed, 522 insertions(+), 598 deletions(-)
--- 1.10/arch/ppc/configs/lopec_defconfig Tue Mar 30 10:35:36 2004
+++ edited/arch/ppc/configs/lopec_defconfig Mon May 17 10:36:47 2004
@@ -4,23 +4,39 @@
CONFIG_MMU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_HAVE_DEC_LOCK=y
+CONFIG_PPC=y
+CONFIG_PPC32=y
+CONFIG_GENERIC_NVRAM=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_STANDALONE=y
+CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_EMBEDDED is not set
+CONFIG_HOTPLUG=y
+# CONFIG_IKCONFIG is not set
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
#
# Loadable module support
@@ -33,24 +49,25 @@
CONFIG_KMOD=y
#
-# Platform support
+# Processor
#
-CONFIG_PPC=y
-CONFIG_PPC32=y
CONFIG_6xx=y
# CONFIG_40x is not set
+# CONFIG_44x is not set
# CONFIG_POWER3 is not set
+# CONFIG_POWER4 is not set
# CONFIG_8xx is not set
+CONFIG_ALTIVEC=y
+# CONFIG_TAU is not set
+# CONFIG_CPU_FREQ is not set
+CONFIG_PPC_STD_MMU=y
#
-# IBM 4xx options
+# Platform options
#
-# CONFIG_8260 is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_STD_MMU=y
# CONFIG_PPC_MULTIPLATFORM is not set
# CONFIG_APUS is not set
-# CONFIG_WILLOW_2 is not set
+# CONFIG_WILLOW is not set
# CONFIG_PCORE is not set
# CONFIG_POWERPMC250 is not set
# CONFIG_EV64260 is not set
@@ -66,26 +83,31 @@
# CONFIG_K2 is not set
# CONFIG_PAL4 is not set
# CONFIG_GEMINI is not set
+# CONFIG_EST8260 is not set
+# CONFIG_SBS8260 is not set
+# CONFIG_RPX6 is not set
+# CONFIG_TQM8260 is not set
CONFIG_EPIC_SERIAL_MODE=y
+CONFIG_MPC10X_BRIDGE=y
+# CONFIG_MPC10X_STORE_GATHERING is not set
+CONFIG_PPCBUG_NVRAM=y
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
-CONFIG_ALTIVEC=y
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_KERNEL_ELF=y
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="ip=on"
#
-# General setup
+# Bus options
#
-# CONFIG_HIGHMEM is not set
+CONFIG_GENERIC_ISA_DMA=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
-CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_MISC=m
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
-CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
@@ -93,15 +115,6 @@
# CONFIG_PCMCIA is not set
#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-CONFIG_PPC601_SYNC_FIX=y
-# CONFIG_PPCBUG_NVRAM is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
@@ -116,14 +129,27 @@
CONFIG_BOOT_LOAD=0x00800000
#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_FW_LOADER is not set
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
# Plug and Play support
#
-# CONFIG_PNP is not set
#
# Block devices
@@ -134,47 +160,77 @@
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_CARMEL is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_INITRD is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
+# CONFIG_LBD is not set
#
-# ATA/IDE/MFM/RLL support
+# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
-
-#
-# IDE, ATA and ATAPI Block devices
-#
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
-# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
-# CONFIG_BLK_DEV_IDECD is not set
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
+# CONFIG_IDE_TASKFILE_IO is not set
#
# IDE chipset support/bugfixes
#
-# CONFIG_BLK_DEV_IDEPCI is not set
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_SL82C105=y
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+CONFIG_BLK_DEV_ADMA=y
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
#
-# SCSI support
+# SCSI device support
#
CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
@@ -194,6 +250,12 @@
# CONFIG_SCSI_LOGGING is not set
#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+
+#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
@@ -202,11 +264,9 @@
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
+# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
@@ -214,34 +274,41 @@
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_NCR53C7xx is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_PCI2000 is not set
-# CONFIG_SCSI_PCI2220I is not set
+# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
-# IEEE 1394 (FireWire) support (EXPERIMENTAL)
+# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
@@ -251,6 +318,10 @@
# CONFIG_I2O is not set
#
+# Macintosh device drivers
+#
+
+#
# Networking support
#
CONFIG_NET=y
@@ -261,38 +332,37 @@
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_IPV6 is not set
-# CONFIG_XFRM_USER is not set
+# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
-CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
@@ -310,17 +380,21 @@
# Network testing
#
# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
@@ -342,9 +416,11 @@
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
+# CONFIG_E100_NAPI is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
@@ -373,102 +449,49 @@
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
+# CONFIG_S2IO is not set
#
-# Wireless LAN (non-hamradio)
+# Token Ring devices
#
-# CONFIG_NET_RADIO is not set
+# CONFIG_TR is not set
#
-# Token Ring devices (depends on LLC=y)
+# Wireless LAN (non-hamradio)
#
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
+# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_RCPCI is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
-# CONFIG_ISDN_BOOL is not set
+# CONFIG_ISDN is not set
#
-# Graphics support
+# Telephony Support
#
-CONFIG_FB=y
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_CT65550 is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S3TRIO is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_RIVA is not set
-CONFIG_FB_MATROX=y
-CONFIG_FB_MATROX_MILLENIUM=y
-# CONFIG_FB_MATROX_MYSTIQUE is not set
-# CONFIG_FB_MATROX_G450 is not set
-CONFIG_FB_MATROX_G100A=y
-CONFIG_FB_MATROX_G100=y
-# CONFIG_FB_MATROX_MULTIHEAD is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
+# CONFIG_PHONE is not set
#
# Input device support
#
-CONFIG_INPUT=m
+# CONFIG_INPUT is not set
#
# Userland interfaces
#
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
@@ -476,23 +499,16 @@
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
# CONFIG_SERIO is not set
+# CONFIG_SERIO_I8042 is not set
#
# Input Device Drivers
#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_INPUT_MOUSE=y
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Macintosh device drivers
-#
#
# Character devices
#
+# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -500,6 +516,7 @@
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
# CONFIG_SERIAL_8250_EXTENDED is not set
#
@@ -508,26 +525,8 @@
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=256
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# I2C Hardware Sensors Mainboard support
-#
-
-#
-# I2C Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_QIC02_TAPE is not set
#
@@ -553,122 +552,30 @@
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
+# I2C support
#
-CONFIG_VIDEO_PROC_FS=y
+# CONFIG_I2C is not set
#
-# Video Adapters
+# Misc devices
#
-# CONFIG_VIDEO_PMS is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_STRADIS is not set
#
-# Radio Adapters
+# Multimedia devices
#
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
+# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
-# CONFIG_VIDEO_BTCX is not set
#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
+# Graphics support
#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
+# CONFIG_FB is not set
#
# Sound
@@ -707,26 +614,20 @@
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_HID_FF is not set
+
+#
+# Input core support is needed for USB HID input layer or HIDBP support
+#
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_XPAD is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
-CONFIG_USB_SCANNER=m
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
@@ -734,14 +635,10 @@
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_PWC is not set
-CONFIG_USB_SE401=m
-# CONFIG_USB_STV680 is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
#
# USB Network adaptors
@@ -785,28 +682,126 @@
#
# USB Miscellaneous drivers
#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_TEST is not set
+
+#
+# USB Gadget Support
+#
# CONFIG_USB_GADGET is not set
#
-# Bluetooth support
+# File systems
#
-# CONFIG_BT is not set
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_FAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+# CONFIG_DEVFS_FS is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+# CONFIG_EXPORTFS is not set
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
#
# Library routines
#
# CONFIG_CRC32 is not set
+# CONFIG_LIBCRC32C is not set
#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_KALLSYMS is not set
# CONFIG_SERIAL_TEXT_DEBUG is not set
#
--- 1.15/arch/ppc/configs/sandpoint_defconfig Tue Mar 30 10:35:50 2004
+++ edited/arch/ppc/configs/sandpoint_defconfig Mon May 17 10:36:51 2004
@@ -4,23 +4,39 @@
CONFIG_MMU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_HAVE_DEC_LOCK=y
+CONFIG_PPC=y
+CONFIG_PPC32=y
+CONFIG_GENERIC_NVRAM=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_STANDALONE=y
+CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
-CONFIG_SWAP=y
+# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
+CONFIG_HOTPLUG=y
+# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
#
# Loadable module support
@@ -33,24 +49,25 @@
CONFIG_KMOD=y
#
-# Platform support
+# Processor
#
-CONFIG_PPC=y
-CONFIG_PPC32=y
CONFIG_6xx=y
# CONFIG_40x is not set
+# CONFIG_44x is not set
# CONFIG_POWER3 is not set
+# CONFIG_POWER4 is not set
# CONFIG_8xx is not set
+CONFIG_ALTIVEC=y
+# CONFIG_TAU is not set
+# CONFIG_CPU_FREQ is not set
+CONFIG_PPC_STD_MMU=y
#
-# IBM 4xx options
+# Platform options
#
-# CONFIG_8260 is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_STD_MMU=y
# CONFIG_PPC_MULTIPLATFORM is not set
# CONFIG_APUS is not set
-# CONFIG_WILLOW_2 is not set
+# CONFIG_WILLOW is not set
# CONFIG_PCORE is not set
# CONFIG_POWERPMC250 is not set
# CONFIG_EV64260 is not set
@@ -66,28 +83,31 @@
# CONFIG_K2 is not set
# CONFIG_PAL4 is not set
# CONFIG_GEMINI is not set
+# CONFIG_EST8260 is not set
+# CONFIG_SBS8260 is not set
+# CONFIG_RPX6 is not set
+# CONFIG_TQM8260 is not set
CONFIG_PPC_GEN550=y
CONFIG_EPIC_SERIAL_MODE=y
+CONFIG_MPC10X_BRIDGE=y
# CONFIG_MPC10X_STORE_GATHERING is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
-CONFIG_ALTIVEC=y
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_KERNEL_ELF=y
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="ip=on"
#
-# General setup
+# Bus options
#
-# CONFIG_HIGHMEM is not set
+CONFIG_GENERIC_ISA_DMA=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
-CONFIG_KCORE_ELF=y
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=m
# CONFIG_PCI_LEGACY_PROC is not set
# CONFIG_PCI_NAMES is not set
-CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
@@ -95,13 +115,6 @@
# CONFIG_PCMCIA is not set
#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-CONFIG_PPC601_SYNC_FIX=y
-# CONFIG_CMDLINE_BOOL is not set
-
-#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
@@ -116,6 +129,10 @@
CONFIG_BOOT_LOAD=0x00800000
#
+# Device Drivers
+#
+
+#
# Generic Driver Options
#
# CONFIG_FW_LOADER is not set
@@ -126,9 +143,13 @@
# CONFIG_MTD is not set
#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
# Plug and Play support
#
-# CONFIG_PNP is not set
#
# Block devices
@@ -139,34 +160,28 @@
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_CARMEL is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
+# CONFIG_LBD is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
-
-#
-# IDE, ATA and ATAPI Block devices
-#
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
-# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_TASKFILE_IO=y
@@ -174,7 +189,11 @@
#
# IDE chipset support/bugfixes
#
+CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
@@ -182,11 +201,16 @@
# CONFIG_SCSI is not set
#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
# Fusion MPT device support
#
#
-# IEEE 1394 (FireWire) support (EXPERIMENTAL)
+# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
@@ -196,6 +220,10 @@
# CONFIG_I2O is not set
#
+# Macintosh device drivers
+#
+
+#
# Networking support
#
CONFIG_NET=y
@@ -206,38 +234,37 @@
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_IPV6 is not set
-# CONFIG_XFRM_USER is not set
+# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
-CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
@@ -255,17 +282,21 @@
# Network testing
#
# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
@@ -287,6 +318,7 @@
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
+# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
@@ -296,15 +328,20 @@
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
-# CONFIG_TC35815 is not set
+# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
+# CONFIG_E100_NAPI is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
+CONFIG_8139TOO=y
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
@@ -328,6 +365,22 @@
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=m
@@ -339,139 +392,45 @@
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices (depends on LLC=y)
-#
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
+# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
-# CONFIG_ISDN_BOOL is not set
+# CONFIG_ISDN is not set
#
-# Graphics support
+# Telephony Support
#
-CONFIG_FB=y
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_CT65550 is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S3TRIO is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_RIVA is not set
-CONFIG_FB_MATROX=y
-CONFIG_FB_MATROX_MILLENIUM=y
-# CONFIG_FB_MATROX_MYSTIQUE is not set
-# CONFIG_FB_MATROX_G450 is not set
-# CONFIG_FB_MATROX_G100A is not set
-# CONFIG_FB_MATROX_MULTIHEAD is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_PCI_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
+# CONFIG_PHONE is not set
#
# Input device support
#
-CONFIG_INPUT=y
+# CONFIG_INPUT is not set
#
# Userland interfaces
#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO is not set
+# CONFIG_SERIO_I8042 is not set
#
# Input Device Drivers
#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_PCSPKR is not set
-CONFIG_INPUT_UINPUT=m
-
-#
-# Macintosh device drivers
-#
#
# Character devices
#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
+# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -479,6 +438,7 @@
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
# CONFIG_SERIAL_8250_EXTENDED is not set
#
@@ -487,26 +447,8 @@
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=256
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# I2C Hardware Sensors Mainboard support
-#
-
-#
-# I2C Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_QIC02_TAPE is not set
#
@@ -531,135 +473,31 @@
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
-CONFIG_RAW_DRIVER=m
-# CONFIG_HANGCHECK_TIMER is not set
+# CONFIG_RAW_DRIVER is not set
#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
+# I2C support
#
-CONFIG_VIDEO_PROC_FS=y
+# CONFIG_I2C is not set
#
-# Video Adapters
+# Misc devices
#
-# CONFIG_VIDEO_PMS is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_STRADIS is not set
#
-# Radio Adapters
+# Multimedia devices
#
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
+# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
-# CONFIG_VIDEO_BTCX is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
+# Graphics support
#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
+# CONFIG_FB is not set
#
# Sound
@@ -692,47 +530,38 @@
# CONFIG_USB_BLUETOOTH_TTY is not set
CONFIG_USB_ACM=m
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_STORAGE is not set
#
-# SCSI support is needed for USB Storage
+# USB Human Interface Devices (HID)
#
+# CONFIG_USB_HID is not set
#
-# USB Human Interface Devices (HID)
+# Input core support is needed for USB HID input layer or HIDBP support
+#
+
+#
+# USB HID Boot Protocol drivers
#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_XPAD is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
-CONFIG_USB_SCANNER=m
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_PWC is not set
-CONFIG_USB_SE401=m
-# CONFIG_USB_STV680 is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
#
# USB Network adaptors
#
-# CONFIG_USB_AX8817X is not set
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
@@ -772,22 +601,123 @@
#
# USB Miscellaneous drivers
#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_TEST is not set
+
+#
+# USB Gadget Support
+#
# CONFIG_USB_GADGET is not set
#
-# Bluetooth support
+# File systems
#
-# CONFIG_BT is not set
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_FAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+# CONFIG_DEVFS_FS is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+# CONFIG_EXPORTFS is not set
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
#
# Library routines
#
-# CONFIG_CRC32 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
@@ -795,7 +725,6 @@
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_KALLSYMS is not set
# CONFIG_SERIAL_TEXT_DEBUG is not set
#
--
Tom Rini
http://gate.crashing.org/~trini/
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH][PPC32] Remove 'mem_pieces_append'
2004-05-17 17:42 ` [PATCH][PPC32] Update Motorola LoPEC and Sandpoint defconfigs Tom Rini
@ 2004-05-17 17:54 ` Tom Rini
2004-05-17 18:06 ` [PATCH][PPC32] Some fixes for 'make O=...' Tom Rini
0 siblings, 1 reply; 27+ messages in thread
From: Tom Rini @ 2004-05-17 17:54 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, Paul Mackerras, Benjamin Herrenschmidt
Remove mem_pieces_append, it is never used.
>From Fabian.Frederick <Fabian.Frederick&prov-liege.be>
arch/ppc/mm/mem_pieces.c | 17 -----------------
arch/ppc/mm/mem_pieces.h | 2 --
2 files changed, 19 deletions(-)
--- 1.9/arch/ppc/mm/mem_pieces.c Fri Sep 12 09:26:53 2003
+++ edited/arch/ppc/mm/mem_pieces.c Fri May 7 15:58:55 2004
@@ -120,23 +120,6 @@
printk("\n");
}
-#if defined(CONFIG_APUS) || defined(CONFIG_PPC_OF)
-/*
- * Add some memory to an array of pieces
- */
-void __init
-mem_pieces_append(struct mem_pieces *mp, unsigned int start, unsigned int size)
-{
- struct reg_property *rp;
-
- if (mp->n_regions >= MEM_PIECES_MAX)
- return;
- rp = &mp->regions[mp->n_regions++];
- rp->address = start;
- rp->size = size;
-}
-#endif /* CONFIG_APUS || CONFIG_PPC_OF */
-
void __init
mem_pieces_sort(struct mem_pieces *mp)
{
--- 1.4/arch/ppc/mm/mem_pieces.h Tue Feb 25 10:44:20 2003
+++ edited/arch/ppc/mm/mem_pieces.h Fri May 7 15:58:58 2004
@@ -38,8 +38,6 @@
extern void *mem_pieces_find(unsigned int size, unsigned int align);
extern void mem_pieces_remove(struct mem_pieces *mp, unsigned int start,
unsigned int size, int must_exist);
-extern void mem_pieces_append(struct mem_pieces *mp, unsigned int start,
- unsigned int size);
extern void mem_pieces_coalesce(struct mem_pieces *mp);
extern void mem_pieces_sort(struct mem_pieces *mp);
--
Tom Rini
http://gate.crashing.org/~trini/
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.6-mm3
2004-05-17 16:38 ` 2.6.6-mm3 Tom Rini
@ 2004-05-17 17:56 ` Tom Rini
2004-05-18 13:45 ` [Kgdb-bugreport] 2.6.6-mm3 Amit S. Kale
0 siblings, 1 reply; 27+ messages in thread
From: Tom Rini @ 2004-05-17 17:56 UTC (permalink / raw)
To: Robert Picco; +Cc: Andrew Morton, linux-kernel, kgdb-bugreport
On Mon, May 17, 2004 at 09:38:13AM -0700, Tom Rini wrote:
> On Mon, May 17, 2004 at 12:30:25PM -0400, Robert Picco wrote:
>
> > Tom Rini wrote:
> >
> > >On Sun, May 16, 2004 at 02:55:14AM -0700, Andrew Morton wrote:
> > >
> > >
> > >
> > >>ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.6/2.6.6-mm3/
> > >>
> > >>- A few VM changes, getting things synced up better with Andrea's work.
> > >>
> > >>- A new kgdb stub, for ia64 (what happened to the grand unified kgdb
> > >> project?)
> > >>
> > >>
> > >
> > >No one asked the ia64 folks who did that work "Hey, have you looked at
> > >the grand unified kgdb project on kgdb.sf.net ?" would be my guess.
> > >
> > >Having said that, if you're willing to go with a slightly late
> > >initalizing (I saw part of the early_param work get dropped again I
> > >think, so I'm gonna guess you don't wanna deal with that again yet) KGDB
> > >for i386 and PPC32, I can whip something up vs 2.6.6 in a day or so.
> >
> > I did the ia64 port and started with Andrew's 2.6.4-mm2 i386 sources.
> > I'm assuming the long term strategy is to move to a unified kgdb being
> > done on sourceforge? If so, I'll take a look at this.
>
> My long term strategy is to get everyone using the version on
> sourceforge that splits out the common portions of the stub from the
> arch-specific portions. If you could go ahead and get ia64 working on
> this as well I'd appreciate it.
>
> Right now it's still vs 2.6.5, but I'm going to try and fix that today
> or tomorrow to be vs 2.6.6.
OK, I've updated things to 2.6.6.
--
Tom Rini
http://gate.crashing.org/~trini/
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH][PPC32] Some fixes for 'make O=...'
2004-05-17 17:54 ` [PATCH][PPC32] Remove 'mem_pieces_append' Tom Rini
@ 2004-05-17 18:06 ` Tom Rini
0 siblings, 0 replies; 27+ messages in thread
From: Tom Rini @ 2004-05-17 18:06 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, Sam Ravnborg
Fix some of the problems with 'make O=...'
Ack'd by Sam Ravnborg.
>From Geoffrey LEVAND <geoffrey.levand@am.sony.com>
arch/ppc/boot/simple/Makefile | 14 +++++++-------
1 files changed, 7 insertions(+), 7 deletions(-)
--- 1.28/arch/ppc/boot/simple/Makefile Wed Mar 17 19:43:04 2004
+++ edited/arch/ppc/boot/simple/Makefile Mon May 17 08:20:35 2004
@@ -41,7 +41,7 @@
# if present on 'classic' PPC.
cacheflag-y := -DCLEAR_CACHES=""
# This file will flush / disable the L2, and L3 if present.
-clear_L2_L3 := $(boot)/simple/clear.S
+clear_L2_L3 := $(srctree)/$(boot)/simple/clear.S
#
# See arch/ppc/kconfig and arch/ppc/platforms/Kconfig
@@ -125,7 +125,7 @@
AFLAGS_head.o += $(cacheflag-y)
# Linker args. This specifies where the image will be run at.
-LD_ARGS := -T $(boot)/ld.script \
+LD_ARGS := -T $(srctree)/$(boot)/ld.script \
-Ttext $(CONFIG_BOOT_LOAD) -Bstatic
OBJCOPY_ARGS := -O elf32-powerpc
@@ -159,8 +159,8 @@
targets := dummy.o
-$(obj)/zvmlinux: $(OBJS) $(LIBS) $(boot)/ld.script $(images)/vmlinux.gz \
- $(obj)/dummy.o
+$(obj)/zvmlinux: $(OBJS) $(LIBS) $(srctree)/$(boot)/ld.script \
+ $(images)/vmlinux.gz $(obj)/dummy.o
$(OBJCOPY) $(OBJCOPY_ARGS) \
--add-section=.image=$(images)/vmlinux.gz \
--set-section-flags=.image=contents,alloc,load,readonly,data \
@@ -169,7 +169,7 @@
$(OBJCOPY) $(OBJCOPY_ARGS) $@ $@ -R .comment -R .stab \
-R .stabstr -R .ramdisk -R .sysmap
-$(obj)/zvmlinux.initrd: $(OBJS) $(LIBS) $(boot)/ld.script \
+$(obj)/zvmlinux.initrd: $(OBJS) $(LIBS) $(srctree)/$(boot)/ld.script \
$(images)/vmlinux.gz $(obj)/dummy.o
$(OBJCOPY) $(OBJCOPY_ARGS) \
--add-section=.ramdisk=$(images)/ramdisk.image.gz \
@@ -210,10 +210,10 @@
$(MKTREE) $(obj)/zvmlinux.initrd $(images)/zImage.initrd.$(end-y) \
$(ENTRYPOINT)
-$(images)/zImage-PPLUS: $(obj)/zvmlinux $(utils)/mkprep $(MKBUGBOOT)
+$(images)/zImage-PPLUS: $(obj)/zvmlinux $(MKPREP) $(MKBUGBOOT)
$(MKPREP) -pbp $(obj)/zvmlinux $(images)/zImage.$(end-y)
$(MKBUGBOOT) $(obj)/zvmlinux $(images)/zImage.bugboot
-$(images)/zImage.initrd-PPLUS: $(obj)/zvmlinux.initrd $(utils)/mkprep $(MKBUGBOOT)
+$(images)/zImage.initrd-PPLUS: $(obj)/zvmlinux.initrd $(MKPREP) $(MKBUGBOOT)
$(MKPREP) -pbp $(obj)/zvmlinux.initrd $(images)/zImage.initrd.$(end-y)
$(MKBUGBOOT) $(obj)/zvmlinux.initrd $(images)/zImage.initrd.bugboot
--
Tom Rini
http://gate.crashing.org/~trini/
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: Scroll wheel on PS/2 Logitech MouseMan Wheel no longer works (was Re: 2.6.6-mm3)
2004-05-17 13:09 ` Scroll wheel on PS/2 Logitech MouseMan Wheel no longer works (was Re: 2.6.6-mm3) Sean Neakums
@ 2004-05-17 18:10 ` Dmitry Torokhov
[not found] ` <6u4qqejiny.fsf@zork.zork.net>
0 siblings, 1 reply; 27+ messages in thread
From: Dmitry Torokhov @ 2004-05-17 18:10 UTC (permalink / raw)
To: linux-kernel; +Cc: Sean Neakums, Andrew Morton, vojtech
On Monday 17 May 2004 08:09 am, Sean Neakums wrote:
> Andrew Morton <akpm@osdl.org> writes:
>
> > bk-input.patch
>
> I'm guessing this patch contains the changes responsible.
>
> As with 2.6.6-mm2 (and before, from a quick grep of
> /var/log/messages), the mouse is detected as
>
> mice: PS/2 mouse device common for all mice
> serio: i8042 AUX port at 0x60,0x64 irq 12
> input: ImExPS/2 Logitech Wheel Mouse on isa0060/serio1
>
> but moving the wheel causes the pointer to make large jumps toward the
> top-right corner.
>
> When I boot with psmouse.proto=imps, it is detected as below and works
> as before.
>
> mice: PS/2 mouse device common for all mice
> serio: i8042 AUX port at 0x60,0x64 irq 12
> input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
>
> In case it's relevant, the mouse is connected through a KVM switch.
My Intellimouse Explorer (USB) wheel seems to be working fine so mousedev
changes should be ok... Would you mind compiling evbug module and telling
me what events the wheel generates?
Thanks!
--
Dmitry
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.6-mm3: i810 agpgart module can't be initialized
2004-05-16 9:55 2.6.6-mm3 Andrew Morton
` (9 preceding siblings ...)
2004-05-17 17:42 ` [PATCH][PPC32] Update Motorola LoPEC and Sandpoint defconfigs Tom Rini
@ 2004-05-18 2:08 ` Clemens Schwaighofer
10 siblings, 0 replies; 27+ messages in thread
From: Clemens Schwaighofer @ 2004-05-18 2:08 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 2267 bytes --]
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi,
I have the same problem with 2.6.6-mm3 like I had with 2.6.6-mm2
in my dmesg I have this (complete attached):
i810fb: cannot acquire agp
...
Linux agpgart interface v0.100 (c) Dave Jones
[drm:i810_probe] *ERROR* Cannot initialize the agpgart module
...
I haven't changed my config from 2.6.6-mm1 where it worked just fine.
Because of this X can't start of course.
lspci:
debian-test:~# lspci
0000:00:00.0 Host bridge: Intel Corp. 82810E DC-133 GMCH [Graphics
Memory Controller Hub] (rev 03)
0000:00:01.0 VGA compatible controller: Intel Corp. 82810E DC-133 CGC
[Chipset Graphics Controller] (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface
to PCI Bridge (rev 05)
0000:00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 05)
0000:00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 05)
0000:00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 05)
0000:00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 05)
0000:00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 05)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97
Audio (rev 05)
0000:01:08.0 Ethernet controller: Intel Corp. 82801BA/BAM/CA/CAM
Ethernet Controller (rev 03
lspci -n:
debian-test:~# lspci -n
0000:00:00.0 Class 0600: 8086:7124 (rev 03)
0000:00:01.0 Class 0300: 8086:7125 (rev 03)
0000:00:1e.0 Class 0604: 8086:244e (rev 05)
0000:00:1f.0 Class 0601: 8086:2440 (rev 05)
0000:00:1f.1 Class 0101: 8086:244b (rev 05)
0000:00:1f.2 Class 0c03: 8086:2442 (rev 05)
0000:00:1f.3 Class 0c05: 8086:2443 (rev 05)
0000:00:1f.4 Class 0c03: 8086:2444 (rev 05)
0000:00:1f.5 Class 0401: 8086:2445 (rev 05)
0000:01:08.0 Class 0200: 8086:2449 (rev 03)
- --
Clemens Schwaighofer - IT Engineer & System Administration
==========================================================
TEQUILA\Japan, 6-17-2 Ginza Chuo-ku, Tokyo 104-8167, JAPAN
Tel: +81-(0)3-3545-7703 Fax: +81-(0)3-3545-7343
http://www.tequila.co.jp
==========================================================
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)
iD8DBQFAqXAbjBz/yQjBxz8RArLbAKDJexue+aWUmbs8hbCB2vtOlLlgEgCeI3KZ
TMxImy4vQRBZnoCVIORCB0Q=
=KgOq
-----END PGP SIGNATURE-----
[-- Attachment #2: dmesg.2.6.6-mm3 --]
[-- Type: text/plain, Size: 12372 bytes --]
Linux version 2.6.6-mm3 (root@debian-test) (gcc version 3.3.3 (Debian 20040429)) #1 Tue May 18 10:36:06 JST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000017ee06c0 (usable)
BIOS-e820: 0000000017ee06c0 - 0000000017ee66c0 (ACPI data)
BIOS-e820: 0000000017ee66c0 - 0000000017eee700 (ACPI NVS)
BIOS-e820: 0000000017eee700 - 0000000018000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
382MB LOWMEM available.
found SMP MP-table at 0009fe00
On node 0 totalpages: 98016
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 93920 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
IBM machine detected. Enabling interrupts during APM calls.
IBM machine detected. Disabling SMBus accesses.
ACPI: RSDP (v000 IBM ) @ 0x000fdfe0
ACPI: RSDT (v001 IBM CDTPWSKM 0x00001010 IBM 0x00000000) @ 0x17ee6640
ACPI: FADT (v001 IBM CDTPWSKM 0x00001010 IBM 0x00000000) @ 0x17ee65c0
ACPI: MADT (v001 IBM CDTPWSKM 0x00001010 IBM 0x00000000) @ 0x17ee6540
ACPI: DSDT (v001 IBM CDTPWSKM 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:11 APIC version 17
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Initializing CPU#0
Kernel command line: root=/dev/hda3 video=i810fb:xres:1024,yres:768,hysnc1:29 hsync2:30,vsync1:60,vsync2:80
CPU 0 irqstacks, hard=c0546000 soft=c0545000
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 1302.984 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Memory: 383496k/392064k available (2888k kernel code, 7792k reserved, 1295k data, 164k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 2572.28 BogoMIPS
Security Scaffold v1.0.0 initialized
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Celeron(TM) CPU 1300MHz stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1302.0738 MHz.
..... host bus clock speed is 100.0210 MHz.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd58c, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [PIN1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [PIN2] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [PIN3] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [PIN4] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [PIN5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [PIN6] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [PIN7] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [PIN8] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
00:00:01[A] -> 2-16 -> IRQ 16 level low
00:00:1e[B] -> 2-17 -> IRQ 17 level low
00:00:1e[C] -> 2-18 -> IRQ 18 level low
00:00:1e[D] -> 2-19 -> IRQ 19 level low
00:00:1f[C] -> 2-23 -> IRQ 23 level low
00:01:08[A] -> 2-20 -> IRQ 20 level low
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00170020
....... : max redirection entries: 0017
....... : PRQ implemented: 0
....... : IO APIC version: 0020
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 0 1 0 0 0 1 1 71
0a 001 01 0 0 0 0 0 1 1 79
0b 001 01 0 0 0 0 0 1 1 81
0c 001 01 0 0 0 0 0 1 1 89
0d 001 01 0 0 0 0 0 1 1 91
0e 001 01 0 0 0 0 0 1 1 99
0f 001 01 0 0 0 0 0 1 1 A1
10 001 01 1 1 0 1 0 1 1 A9
11 001 01 1 1 0 1 0 1 1 B1
12 001 01 1 1 0 1 0 1 1 B9
13 001 01 1 1 0 1 0 1 1 C1
14 001 01 1 1 0 1 0 1 1 D1
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 001 01 1 1 0 1 0 1 1 C9
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ23 -> 0:23
.................................... done.
PCI: Using ACPI for IRQ routing
i810fb: cannot acquire agp
IA-32 Microcode Update Driver: v1.13 <tigran@veritas.com>
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1084845625.4294965784:0): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
udf: registering filesystem
Initializing Cryptographic API
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1, 8 throttling states)
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
[drm:i810_probe] *ERROR* Cannot initialize the agpgart module.
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
parport0: PC-style at 0x378 (0x778) [PCSPP(,...)]
parport0: irq 7 detected
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
eth0: OEM i82557/i82558 10/100 Ethernet, 00:10:C6:16:2F:B3, IRQ 20.
Board assembly a04965-002, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 0000:00:1f.1
ICH2: chipset revision 5
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfff0-0xfff7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfff8-0xffff, BIOS settings: hdc:DMA, hdd:pio
hda: Maxtor 4D040H2, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: CD-W28E, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78156288 sectors (40016 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: hda1 hda2 hda3
hdc: ATAPI 24X CD-ROM CD-R/RW drive, 1280kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:1f.2: Intel Corp. 82801BA/BAM USB (Hub #1)
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: irq 19, io base 0000fb00
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1f.4: Intel Corp. 82801BA/BAM USB (Hub #2)
PCI: Setting latency timer of device 0000:00:1f.4 to 64
uhci_hcd 0000:00:1f.4: irq 23, io base 0000fb80
uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
Advanced Linux Sound Architecture Driver Version 1.0.4 (Tue Mar 30 08:19:30 2004 UTC).
PCI: Setting latency timer of device 0000:00:1f.5 to 64
usb 2-1: new full speed USB device using address 2
intel8x0_measure_ac97_clock: measured 49327 usecs
intel8x0: clocking to 41148
ALSA device list:
#0: Intel 82801BA-ICH2 at 0xf000, irq 17
NET: Registered protocol family 2
scsi0 : SCSI emulation for USB Mass Storage devices
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
PM: Reading pmdisk image.
PM: Resume from disk failed.
ACPI: (supports S0 S1 S3 S4 S5)
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 164k freed
Vendor: IC25N040 Model: ATCS04-0 Rev: CA4O
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
sda: assuming drive cache: write through
sda:<6>Adding 506036k swap on /dev/hda2. Priority:-1 extents:1
EXT3-fs warning: checktime reached, running e2fsck is recommended
EXT3 FS on hda3, internal journal
sda1
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
USB Mass Storage device found at 2
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Disabled Privacy Extensions on device c04bbdc0(lo)
eth0: no IPv6 routers present
[-- Attachment #3: linux-2.6.6-mm3.config --]
[-- Type: text/plain, Size: 31161 bytes --]
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_SMBIOS is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_MATH_EMULATION=y
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_HAVE_DEC_LOCK=y
CONFIG_REGPARM=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_DISK=y
CONFIG_PM_DISK_PARTITION="/dev/hda3"
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set
#
# APM (Advanced Power Management) BIOS Support
#
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
CONFIG_APM_CPU_IDLE=y
# CONFIG_APM_DISPLAY_BLANK is not set
CONFIG_APM_RTC_IS_GMT=y
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCI_USE_VECTOR is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set
#
# Plug and Play support
#
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_LBD=y
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_TASKFILE_IO=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_REPORT_LUNS=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_NAT=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_TOS=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_LOCAL=y
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_RAW=m
#
# IPv6: Netfilter Configuration
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AHESP=m
CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
CONFIG_IP6_NF_RAW=m
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
CONFIG_IPX=m
CONFIG_IPX_INTERN=y
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=y
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_CSZ=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_DELAY=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_POLICE=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=y
# CONFIG_EEPRO100_PIO is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_WAFER_WDT is not set
CONFIG_I8XX_TCO=m
# CONFIG_SC1200_WDT is not set
# CONFIG_SCx200_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_MACHZ_WDT is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_HW_RANDOM=m
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_INTEL_MCH is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
CONFIG_DRM_I810=y
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
CONFIG_HANGCHECK_TIMER=m
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
CONFIG_I2C_I810=m
# CONFIG_I2C_ISA is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
#
# Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
#
# Other I2C Chip support
#
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
# CONFIG_VIDEO_SELECT is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
CONFIG_FB_I810=y
# CONFIG_FB_I810_GTF is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_PCI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VX222 is not set
#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=m
#
# USB Host-to-Host Cables
#
# CONFIG_USB_ALI_M5632 is not set
# CONFIG_USB_AN2720 is not set
# CONFIG_USB_BELKIN is not set
# CONFIG_USB_GENESYS is not set
# CONFIG_USB_NET1080 is not set
# CONFIG_USB_PL2301 is not set
#
# Intelligent USB Devices/Gadgets
#
# CONFIG_USB_ARMLINUX is not set
# CONFIG_USB_EPSON2888 is not set
CONFIG_USB_ZAURUS=y
# CONFIG_USB_CDCETHER is not set
#
# USB Network Adapters
#
# CONFIG_USB_AX8817X is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_TEST is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
# CONFIG_XFS_RT is not set
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_SMB_FS=y
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=y
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf-8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=m
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Profiling support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_SPINLINE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_KGDB is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_SCHEDSTATS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
#
# Security options
#
CONFIG_SECURITY=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_CAPABILITIES=m
# CONFIG_SECURITY_ROOTPLUG is not set
# CONFIG_SECURITY_SELINUX is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m
#
# Library routines
#
CONFIG_CRC32=m
CONFIG_LIBCRC32C=m
CONFIG_QSORT=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_STD_RESOURCES=y
CONFIG_PC=y
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Kgdb-bugreport] Re: 2.6.6-mm3
2004-05-17 17:56 ` 2.6.6-mm3 Tom Rini
@ 2004-05-18 13:45 ` Amit S. Kale
0 siblings, 0 replies; 27+ messages in thread
From: Amit S. Kale @ 2004-05-18 13:45 UTC (permalink / raw)
To: Tom Rini, Robert Picco; +Cc: Andrew Morton, linux-kernel, kgdb-bugreport
On Monday 17 May 2004 11:26 pm, Tom Rini wrote:
> On Mon, May 17, 2004 at 09:38:13AM -0700, Tom Rini wrote:
> > On Mon, May 17, 2004 at 12:30:25PM -0400, Robert Picco wrote:
> > > Tom Rini wrote:
> > > >On Sun, May 16, 2004 at 02:55:14AM -0700, Andrew Morton wrote:
> > > >>ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.6/2
> > > >>.6.6-mm3/
> > > >>
> > > >>- A few VM changes, getting things synced up better with Andrea's
> > > >> work.
> > > >>
> > > >>- A new kgdb stub, for ia64 (what happened to the grand unified kgdb
> > > >> project?)
> > > >
> > > >No one asked the ia64 folks who did that work "Hey, have you looked at
> > > >the grand unified kgdb project on kgdb.sf.net ?" would be my guess.
> > > >
> > > >Having said that, if you're willing to go with a slightly late
> > > >initalizing (I saw part of the early_param work get dropped again I
> > > >think, so I'm gonna guess you don't wanna deal with that again yet)
> > > > KGDB for i386 and PPC32, I can whip something up vs 2.6.6 in a day or
> > > > so.
> > >
> > > I did the ia64 port and started with Andrew's 2.6.4-mm2 i386 sources.
> > > I'm assuming the long term strategy is to move to a unified kgdb being
> > > done on sourceforge? If so, I'll take a look at this.
> >
> > My long term strategy is to get everyone using the version on
> > sourceforge that splits out the common portions of the stub from the
> > arch-specific portions. If you could go ahead and get ia64 working on
> > this as well I'd appreciate it.
> >
> > Right now it's still vs 2.6.5, but I'm going to try and fix that today
> > or tomorrow to be vs 2.6.6.
>
> OK, I've updated things to 2.6.6.
That's great! Thanks.
-Amit
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: Scroll wheel on PS/2 Logitech MouseMan Wheel no longer works (was Re: 2.6.6-mm3)
[not found] ` <200405191256.32335.dtor_core@ameritech.net>
@ 2004-05-20 7:49 ` Sean Neakums
2004-05-26 3:40 ` Dmitry Torokhov
0 siblings, 1 reply; 27+ messages in thread
From: Sean Neakums @ 2004-05-20 7:49 UTC (permalink / raw)
To: Dmitry Torokhov; +Cc: linux-kernel, Andrew Morton, vojtech
Dmitry Torokhov <dtor_core@ameritech.net> writes:
> On Tuesday 18 May 2004 02:31 am, Sean Neakums wrote:
>> Dmitry Torokhov <dtor_core@ameritech.net> writes:
>>
>> > My Intellimouse Explorer (USB) wheel seems to be working fine so mousedev
>> > changes should be ok... Would you mind compiling evbug module and telling
>> > me what events the wheel generates?
>>
>> Here's what logged for up and down respectively:
>>
>> evbug.c: Event. Dev: isa0060/serio1/input0, Type: 2, Code: 0, Value: 222
>> evbug.c: Event. Dev: isa0060/serio1/input0, Type: 2, Code: 1, Value: -15
>> evbug.c: Event. Dev: isa0060/serio1/input0, Type: 0, Code: 0, Value: 0
>>
>> evbug.c: Event. Dev: isa0060/serio1/input0, Type: 2, Code: 0, Value: 214
>> evbug.c: Event. Dev: isa0060/serio1/input0, Type: 2, Code: 1, Value: -1
>> evbug.c: Event. Dev: isa0060/serio1/input0, Type: 0, Code: 0, Value: 0
>>
>
> Hmm... it indeed reports REL_X and REL_Y events instead of REL_WHEEL... So
> its definitely not a mousedev problem. Could you also try booting with
> psmouse.proto=exps and see if it still behaves sanely?
The scrolls wheel appears to do nothing when I boot with psmouse.proto=exps.
Here's what the mouse is shown as in /proc/bus/input/devices:
I: Bus=0011 Vendor=0002 Product=0006 Version=0000
N: Name="ImExPS/2 Generic Explorer Mouse"
P: Phys=isa0060/serio1/input0
H: Handlers=mouse0
B: EV=7
B: KEY=1f0000 0 0 0 0 0 0 0 0
B: REL=103
> Btw, when you boot without psmouse.proto option what poduct/version is shown
> in /proc/bus/input/devices?
With no psmouse.proto set, it shows up as:
I: Bus=0011 Vendor=0002 Product=0006 Version=0050
N: Name="ImExPS/2 Logitech Wheel Mouse"
P: Phys=isa0060/serio1/input0
H: Handlers=mouse0
B: EV=7
B: KEY=1f0000 0 0 0 0 0 0 0 0
B: REL=103
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: Scroll wheel on PS/2 Logitech MouseMan Wheel no longer works (was Re: 2.6.6-mm3)
2004-05-20 7:49 ` Sean Neakums
@ 2004-05-26 3:40 ` Dmitry Torokhov
2004-06-06 17:49 ` Vojtech Pavlik
0 siblings, 1 reply; 27+ messages in thread
From: Dmitry Torokhov @ 2004-05-26 3:40 UTC (permalink / raw)
To: Sean Neakums; +Cc: linux-kernel, Andrew Morton, vojtech
On Thursday 20 May 2004 02:49 am, Sean Neakums wrote:
> Dmitry Torokhov <dtor_core@ameritech.net> writes:
> > >
> > Hmm... it indeed reports REL_X and REL_Y events instead of REL_WHEEL... So
> > its definitely not a mousedev problem. Could you also try booting with
> > psmouse.proto=exps and see if it still behaves sanely?
>
> The scrolls wheel appears to do nothing when I boot with psmouse.proto=exps.
> Here's what the mouse is shown as in /proc/bus/input/devices:
>
Hi,
Sorry for delay with my answer. I got a hold of a mouse that supports
Explorer PS/2 protocol and it works fine here. Still could you try
reverting the patch below and see if it restores the correct behavior.
Thanks!
--
Dmitry
===================================================================
ChangeSet@1.1612.1.17, 2004-05-14 11:18:46+02:00, vojtech@suse.cz
input: Check for IM Explorer mice even if IMPS check failed.
psmouse-base.c | 21 +++++++++++----------
1 files changed, 11 insertions(+), 10 deletions(-)
===================================================================
diff -Nru a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
--- a/drivers/input/mouse/psmouse-base.c 2004-05-25 22:38:24 -05:00
+++ b/drivers/input/mouse/psmouse-base.c 2004-05-25 22:38:24 -05:00
@@ -461,24 +461,25 @@
return type;
}
- if (max_proto >= PSMOUSE_IMPS && intellimouse_detect(psmouse)) {
+ if (max_proto >= PSMOUSE_IMEX && im_explorer_detect(psmouse)) {
if (set_properties) {
set_bit(REL_WHEEL, psmouse->dev.relbit);
+ set_bit(BTN_SIDE, psmouse->dev.keybit);
+ set_bit(BTN_EXTRA, psmouse->dev.keybit);
if (!psmouse->name)
- psmouse->name = "Wheel Mouse";
+ psmouse->name = "Explorer Mouse";
}
- if (max_proto >= PSMOUSE_IMEX && im_explorer_detect(psmouse)) {
+ return PSMOUSE_IMEX;
+ }
- if (!set_properties) {
- set_bit(BTN_SIDE, psmouse->dev.keybit);
- set_bit(BTN_EXTRA, psmouse->dev.keybit);
- if (!psmouse->name)
- psmouse->name = "Explorer Mouse";
- }
+ if (max_proto >= PSMOUSE_IMPS && intellimouse_detect(psmouse)) {
- return PSMOUSE_IMEX;
+ if (set_properties) {
+ set_bit(REL_WHEEL, psmouse->dev.relbit);
+ if (!psmouse->name)
+ psmouse->name = "Wheel Mouse";
}
return PSMOUSE_IMPS;
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: Scroll wheel on PS/2 Logitech MouseMan Wheel no longer works (was Re: 2.6.6-mm3)
2004-05-26 3:40 ` Dmitry Torokhov
@ 2004-06-06 17:49 ` Vojtech Pavlik
0 siblings, 0 replies; 27+ messages in thread
From: Vojtech Pavlik @ 2004-06-06 17:49 UTC (permalink / raw)
To: Dmitry Torokhov; +Cc: Sean Neakums, linux-kernel, Andrew Morton
On Tue, May 25, 2004 at 10:40:25PM -0500, Dmitry Torokhov wrote:
> On Thursday 20 May 2004 02:49 am, Sean Neakums wrote:
> > Dmitry Torokhov <dtor_core@ameritech.net> writes:
> > > >
> > > Hmm... it indeed reports REL_X and REL_Y events instead of REL_WHEEL... So
> > > its definitely not a mousedev problem. Could you also try booting with
> > > psmouse.proto=exps and see if it still behaves sanely?
> >
> > The scrolls wheel appears to do nothing when I boot with psmouse.proto=exps.
> > Here's what the mouse is shown as in /proc/bus/input/devices:
> >
>
> Hi,
>
> Sorry for delay with my answer. I got a hold of a mouse that supports
> Explorer PS/2 protocol and it works fine here. Still could you try
> reverting the patch below and see if it restores the correct behavior.
I think I have a similar fix in the tree already.
>
> Thanks!
>
> --
> Dmitry
>
>
> ===================================================================
>
>
> ChangeSet@1.1612.1.17, 2004-05-14 11:18:46+02:00, vojtech@suse.cz
> input: Check for IM Explorer mice even if IMPS check failed.
>
>
> psmouse-base.c | 21 +++++++++++----------
> 1 files changed, 11 insertions(+), 10 deletions(-)
>
>
> ===================================================================
>
>
>
> diff -Nru a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
> --- a/drivers/input/mouse/psmouse-base.c 2004-05-25 22:38:24 -05:00
> +++ b/drivers/input/mouse/psmouse-base.c 2004-05-25 22:38:24 -05:00
> @@ -461,24 +461,25 @@
> return type;
> }
>
> - if (max_proto >= PSMOUSE_IMPS && intellimouse_detect(psmouse)) {
> + if (max_proto >= PSMOUSE_IMEX && im_explorer_detect(psmouse)) {
>
> if (set_properties) {
> set_bit(REL_WHEEL, psmouse->dev.relbit);
> + set_bit(BTN_SIDE, psmouse->dev.keybit);
> + set_bit(BTN_EXTRA, psmouse->dev.keybit);
> if (!psmouse->name)
> - psmouse->name = "Wheel Mouse";
> + psmouse->name = "Explorer Mouse";
> }
>
> - if (max_proto >= PSMOUSE_IMEX && im_explorer_detect(psmouse)) {
> + return PSMOUSE_IMEX;
> + }
>
> - if (!set_properties) {
> - set_bit(BTN_SIDE, psmouse->dev.keybit);
> - set_bit(BTN_EXTRA, psmouse->dev.keybit);
> - if (!psmouse->name)
> - psmouse->name = "Explorer Mouse";
> - }
> + if (max_proto >= PSMOUSE_IMPS && intellimouse_detect(psmouse)) {
>
> - return PSMOUSE_IMEX;
> + if (set_properties) {
> + set_bit(REL_WHEEL, psmouse->dev.relbit);
> + if (!psmouse->name)
> + psmouse->name = "Wheel Mouse";
> }
>
> return PSMOUSE_IMPS;
>
--
Vojtech Pavlik
SuSE Labs, SuSE CR
^ permalink raw reply [flat|nested] 27+ messages in thread
end of thread, other threads:[~2004-06-06 17:52 UTC | newest]
Thread overview: 27+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-05-16 9:55 2.6.6-mm3 Andrew Morton
2004-05-16 10:35 ` 2.6.6-mm3 Prakash K. Cheemplavam
2004-05-16 11:00 ` 2.6.6-mm3 Gene Heskett
2004-05-16 16:29 ` 2.6.6-mm3 Andrew Morton
2004-05-16 18:38 ` 2.6.6-mm3: USB console.c doesn't compile Adrian Bunk
2004-05-17 16:32 ` Greg KH
2004-05-16 20:15 ` [patch] 2.6.6-mm3: more PC9800 removal Adrian Bunk
2004-05-16 20:35 ` [patch] 2.6.6-mm3: remove PC9800 from should-fix Adrian Bunk
2004-05-17 11:52 ` 2.6.6-mm3 Eric W. Biederman
2004-05-17 12:57 ` 2.6.6-mm3 Aristeu Sergio Rozanski Filho
2004-05-17 15:06 ` 2.6.6-mm3 Robert Picco
2004-05-17 15:51 ` 2.6.6-mm3 Aristeu Sergio Rozanski Filho
2004-05-17 13:09 ` Scroll wheel on PS/2 Logitech MouseMan Wheel no longer works (was Re: 2.6.6-mm3) Sean Neakums
2004-05-17 18:10 ` Dmitry Torokhov
[not found] ` <6u4qqejiny.fsf@zork.zork.net>
[not found] ` <200405191256.32335.dtor_core@ameritech.net>
2004-05-20 7:49 ` Sean Neakums
2004-05-26 3:40 ` Dmitry Torokhov
2004-06-06 17:49 ` Vojtech Pavlik
2004-05-17 16:14 ` 2.6.6-mm3 Tom Rini
2004-05-17 16:30 ` 2.6.6-mm3 Robert Picco
2004-05-17 16:38 ` 2.6.6-mm3 Tom Rini
2004-05-17 17:56 ` 2.6.6-mm3 Tom Rini
2004-05-18 13:45 ` [Kgdb-bugreport] 2.6.6-mm3 Amit S. Kale
2004-05-17 17:20 ` 2.6.6-mm3 Chris Wright
2004-05-17 17:42 ` [PATCH][PPC32] Update Motorola LoPEC and Sandpoint defconfigs Tom Rini
2004-05-17 17:54 ` [PATCH][PPC32] Remove 'mem_pieces_append' Tom Rini
2004-05-17 18:06 ` [PATCH][PPC32] Some fixes for 'make O=...' Tom Rini
2004-05-18 2:08 ` 2.6.6-mm3: i810 agpgart module can't be initialized Clemens Schwaighofer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).