LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Dan Williams <dan.j.williams@intel.com>
To: neilb@suse.de, linux-raid@vger.kernel.org
Cc: akpm@osdl.org, linux-kernel@vger.kernel.org, christopher.leech@intel.com
Subject: [PATCH 07/19] raid5: remove compute_block and compute_parity5
Date: Mon, 11 Sep 2006 16:18:12 -0700	[thread overview]
Message-ID: <20060911231812.4737.28768.stgit@dwillia2-linux.ch.intel.com> (raw)
In-Reply-To: <1158015632.4241.31.camel@dwillia2-linux.ch.intel.com>

From: Dan Williams <dan.j.williams@intel.com>

replaced by the workqueue implementation

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---

 drivers/md/raid5.c |  123 ----------------------------------------------------
 1 files changed, 0 insertions(+), 123 deletions(-)

diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index a07b52b..ad6883b 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -964,129 +964,6 @@ #define check_xor() 	do { 						\
 			} while(0)
 
 
-static void compute_block(struct stripe_head *sh, int dd_idx)
-{
-	int i, count, disks = sh->disks;
-	void *ptr[MAX_XOR_BLOCKS], *p;
-
-	PRINTK("compute_block, stripe %llu, idx %d\n", 
-		(unsigned long long)sh->sector, dd_idx);
-
-	ptr[0] = page_address(sh->dev[dd_idx].page);
-	memset(ptr[0], 0, STRIPE_SIZE);
-	count = 1;
-	for (i = disks ; i--; ) {
-		if (i == dd_idx)
-			continue;
-		p = page_address(sh->dev[i].page);
-		if (test_bit(R5_UPTODATE, &sh->dev[i].flags))
-			ptr[count++] = p;
-		else
-			printk(KERN_ERR "compute_block() %d, stripe %llu, %d"
-				" not present\n", dd_idx,
-				(unsigned long long)sh->sector, i);
-
-		check_xor();
-	}
-	if (count != 1)
-		xor_block(count, STRIPE_SIZE, ptr);
-	set_bit(R5_UPTODATE, &sh->dev[dd_idx].flags);
-}
-
-static void compute_parity5(struct stripe_head *sh, int method)
-{
-	raid5_conf_t *conf = sh->raid_conf;
-	int i, pd_idx = sh->pd_idx, disks = sh->disks, count;
-	void *ptr[MAX_XOR_BLOCKS];
-	struct bio *chosen;
-
-	PRINTK("compute_parity5, stripe %llu, method %d\n",
-		(unsigned long long)sh->sector, method);
-
-	count = 1;
-	ptr[0] = page_address(sh->dev[pd_idx].page);
-	switch(method) {
-	case READ_MODIFY_WRITE:
-		BUG_ON(!test_bit(R5_UPTODATE, &sh->dev[pd_idx].flags));
-		for (i=disks ; i-- ;) {
-			if (i==pd_idx)
-				continue;
-			if (sh->dev[i].towrite &&
-			    test_bit(R5_UPTODATE, &sh->dev[i].flags)) {
-				ptr[count++] = page_address(sh->dev[i].page);
-				chosen = sh->dev[i].towrite;
-				sh->dev[i].towrite = NULL;
-
-				if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
-					wake_up(&conf->wait_for_overlap);
-
-				BUG_ON(sh->dev[i].written);
-				sh->dev[i].written = chosen;
-				check_xor();
-			}
-		}
-		break;
-	case RECONSTRUCT_WRITE:
-		memset(ptr[0], 0, STRIPE_SIZE);
-		for (i= disks; i-- ;)
-			if (i!=pd_idx && sh->dev[i].towrite) {
-				chosen = sh->dev[i].towrite;
-				sh->dev[i].towrite = NULL;
-
-				if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
-					wake_up(&conf->wait_for_overlap);
-
-				BUG_ON(sh->dev[i].written);
-				sh->dev[i].written = chosen;
-			}
-		break;
-	case CHECK_PARITY:
-		break;
-	}
-	if (count>1) {
-		xor_block(count, STRIPE_SIZE, ptr);
-		count = 1;
-	}
-	
-	for (i = disks; i--;)
-		if (sh->dev[i].written) {
-			sector_t sector = sh->dev[i].sector;
-			struct bio *wbi = sh->dev[i].written;
-			while (wbi && wbi->bi_sector < sector + STRIPE_SECTORS) {
-				copy_data(1, wbi, sh->dev[i].page, sector);
-				wbi = r5_next_bio(wbi, sector);
-			}
-
-			set_bit(R5_LOCKED, &sh->dev[i].flags);
-			set_bit(R5_UPTODATE, &sh->dev[i].flags);
-		}
-
-	switch(method) {
-	case RECONSTRUCT_WRITE:
-	case CHECK_PARITY:
-		for (i=disks; i--;)
-			if (i != pd_idx) {
-				ptr[count++] = page_address(sh->dev[i].page);
-				check_xor();
-			}
-		break;
-	case READ_MODIFY_WRITE:
-		for (i = disks; i--;)
-			if (sh->dev[i].written) {
-				ptr[count++] = page_address(sh->dev[i].page);
-				check_xor();
-			}
-	}
-	if (count != 1)
-		xor_block(count, STRIPE_SIZE, ptr);
-	
-	if (method != CHECK_PARITY) {
-		set_bit(R5_UPTODATE, &sh->dev[pd_idx].flags);
-		set_bit(R5_LOCKED,   &sh->dev[pd_idx].flags);
-	} else
-		clear_bit(R5_UPTODATE, &sh->dev[pd_idx].flags);
-}
-
 static void compute_parity6(struct stripe_head *sh, int method)
 {
 	raid6_conf_t *conf = sh->raid_conf;

  parent reply	other threads:[~2006-09-11 23:24 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-09-11 23:00 [PATCH 00/19] Hardware Accelerated MD RAID5: Introduction Dan Williams
2006-09-11 23:17 ` [PATCH 01/19] raid5: raid5_do_soft_block_ops Dan Williams
2006-09-11 23:34   ` Jeff Garzik
2006-09-11 23:17 ` [PATCH 02/19] raid5: move write operations to a workqueue Dan Williams
2006-09-11 23:36   ` Jeff Garzik
2006-09-11 23:17 ` [PATCH 03/19] raid5: move check parity " Dan Williams
2006-09-11 23:17 ` [PATCH 04/19] raid5: move compute block " Dan Williams
2006-09-11 23:18 ` [PATCH 05/19] raid5: move read completion copies " Dan Williams
2006-09-11 23:18 ` [PATCH 06/19] raid5: move the reconstruct write expansion operation " Dan Williams
2006-09-11 23:18 ` Dan Williams [this message]
2006-09-11 23:18 ` [PATCH 08/19] dmaengine: enable multiple clients and operations Dan Williams
2006-09-11 23:44   ` Jeff Garzik
2006-09-12  0:14     ` Dan Williams
2006-09-12  0:52       ` Roland Dreier
2006-09-12  6:18         ` Dan Williams
2006-09-12  9:15           ` Evgeniy Polyakov
2006-09-13  4:04           ` Jeff Garzik
2006-09-15 16:38     ` Olof Johansson
2006-09-15 19:44       ` [PATCH] dmaengine: clean up and abstract function types (was Re: [PATCH 08/19] dmaengine: enable multiple clients and operations) Olof Johansson
2006-09-15 20:02         ` [PATCH] [v2] " Olof Johansson
2006-09-18 22:56         ` [PATCH] " Dan Williams
2006-09-19  1:05           ` Olof Johansson
2006-09-19 11:20             ` Alan Cox
2006-09-19 16:32               ` Olof Johansson
2006-09-11 23:18 ` [PATCH 09/19] dmaengine: reduce backend address permutations Dan Williams
2006-09-15 14:46   ` Olof Johansson
2006-09-11 23:18 ` [PATCH 10/19] dmaengine: expose per channel dma mapping characteristics to clients Dan Williams
2006-09-11 23:18 ` [PATCH 11/19] dmaengine: add memset as an asynchronous dma operation Dan Williams
2006-09-11 23:50   ` Jeff Garzik
2006-09-11 23:18 ` [PATCH 12/19] dmaengine: dma_async_memcpy_err for DMA engines that do not support memcpy Dan Williams
2006-09-11 23:51   ` Jeff Garzik
2006-09-11 23:18 ` [PATCH 13/19] dmaengine: add support for dma xor zero sum operations Dan Williams
2006-09-11 23:18 ` [PATCH 14/19] dmaengine: add dma_sync_wait Dan Williams
2006-09-11 23:52   ` Jeff Garzik
2006-09-11 23:18 ` [PATCH 15/19] dmaengine: raid5 dma client Dan Williams
2006-09-11 23:54   ` Jeff Garzik
2006-09-11 23:19 ` [PATCH 16/19] dmaengine: Driver for the Intel IOP 32x, 33x, and 13xx RAID engines Dan Williams
2006-09-15 14:57   ` Olof Johansson
2006-09-11 23:19 ` [PATCH 17/19] iop3xx: define IOP3XX_REG_ADDR[32|16|8] and clean up DMA/AAU defs Dan Williams
2006-09-11 23:55   ` Jeff Garzik
2006-09-11 23:19 ` [PATCH 18/19] iop3xx: Give Linux control over PCI (ATU) initialization Dan Williams
2006-09-11 23:56   ` Jeff Garzik
2006-09-11 23:19 ` [PATCH 19/19] iop3xx: IOP 32x and 33x support for the iop-adma driver Dan Williams
2006-09-11 23:38 ` [PATCH 00/19] Hardware Accelerated MD RAID5: Introduction Jeff Garzik
2006-09-11 23:53   ` Dan Williams
2006-09-12  2:41     ` Jeff Garzik
2006-09-12  5:47       ` Dan Williams
2006-09-13  4:05         ` Jeff Garzik
2006-09-13  7:15 ` Jakob Oestergaard
2006-09-13 19:17   ` Dan Williams
2006-09-14  7:42     ` Jakob Oestergaard
2006-10-11  1:46       ` Dan Williams
2006-10-08 22:18 ` Neil Brown
2006-10-10 18:23   ` Dan Williams
2006-10-11  2:44     ` Neil Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20060911231812.4737.28768.stgit@dwillia2-linux.ch.intel.com \
    --to=dan.j.williams@intel.com \
    --cc=akpm@osdl.org \
    --cc=christopher.leech@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-raid@vger.kernel.org \
    --cc=neilb@suse.de \
    --subject='Re: [PATCH 07/19] raid5: remove compute_block and compute_parity5' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).