LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Stephen Hemminger <shemminger@osdl.org>
To: Jean Delvare <khali@linux-fr.org>
Cc: Greg KH <greg@kroah.com>,
	i2c@lm-sensors.org, linux-kernel@vger.kernel.org
Subject: Re: [i2c] Why to I2c drivers not autoload like other PCI devices?
Date: Thu, 4 Jan 2007 09:54:12 -0800	[thread overview]
Message-ID: <20070104095412.16ac9f53@localhost> (raw)
In-Reply-To: <20070104175412.76ebce25.khali@linux-fr.org>

On Thu, 4 Jan 2007 17:54:12 +0100
Jean Delvare <khali@linux-fr.org> wrote:

> On Wed, 3 Jan 2007 21:51:28 -0800, Greg KH wrote:
> > On Wed, Jan 03, 2007 at 05:29:16PM -0800, Stephen Hemminger wrote:
> > > On Wed, 3 Jan 2007 16:56:00 -0800
> > > Greg KH <greg@kroah.com> wrote:
> > > 
> > > > On Wed, Jan 03, 2007 at 04:50:20PM -0800, Stephen Hemminger wrote:
> > > > > Is there some missing magic (udev rule?) that keeps i2c device modules
> > > > > from loading? For example: the Intel i2c-i801 module ought to get loaded
> > > > > automatically on boot up since it has a set of PCI id's that generate
> > > > > the necessary module aliases. It would be better if I2C device's autoloaded
> > > > > like other PCI devices.
> > > > 
> > > > No, it should autoload, if it has a MODULE_DEVICE_TABLE() in it.  In
> > > > fact, the i2c-i801 autoloads on one of my machines just fine.  Are you
> > > > sure your pci ids match properly?
> > > > 
> > > > thanks,
> > > > 
> > > > greg k-h
> > > 
> > > This laptop is running Ubuntu Edgy (6.10) and it doesn't autoload.
> > > Everything works fine if I manually load the module with modprobe.
> > > 
> > > This device should match:
> > > 
> > > 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
> > > 00: 86 80 da 27 01 00 80 02 02 00 05 0c 00 00 00 00
> > > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > > 20: a1 18 00 00 00 00 00 00 00 00 00 00 cf 10 88 13
> > > 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 02 00 00
> > > 
> > > This driver modinfo:
> > > 
> > > filename:       /lib/modules/2.6.20-rc3/kernel/drivers/i2c/busses/i2c-i801.ko
> > 
> > What does:
> > 	modprobe --show-depends `cat /sys/bus/pci/0000:00:1f.3/modalias`
> > show? 
> 
> Greg really means:
> 	modprobe --show-depends `cat /sys/bus/pci/devices/0000:00:1f.3/modalias`
> and same for the other commands below.


Ahak
$ modprobe --show-depends `cat /sys/bus/pci/devices/0000:00:1f.3/modalias`
WARNING: Not loading blacklisted module i2c_i801
FATAL: Module pci:v00008086d000027DAsv000010CFsd00001388bc0Csc05i00 not found.

And the blacklist entry is:

# causes failure to suspend on HP compaq nc6000 (Ubuntu: #10306)
blacklist i2c_i801

Looks like Ubuntu decided to wallpaper over a problem rather than fixing it

  reply	other threads:[~2007-01-04 17:58 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-01-04  0:50 Stephen Hemminger
2007-01-04  0:56 ` Greg KH
2007-01-04  1:29   ` Stephen Hemminger
2007-01-04  5:51     ` Greg KH
2007-01-04 16:54       ` [i2c] " Jean Delvare
2007-01-04 17:54         ` Stephen Hemminger [this message]
2007-01-04 19:32           ` Greg KH
2007-01-04 20:47             ` Jean Delvare

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20070104095412.16ac9f53@localhost \
    --to=shemminger@osdl.org \
    --cc=greg@kroah.com \
    --cc=i2c@lm-sensors.org \
    --cc=khali@linux-fr.org \
    --cc=linux-kernel@vger.kernel.org \
    --subject='Re: [i2c] Why to I2c drivers not autoload like other PCI devices?' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).