LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* 2.6.19.1 failing
@ 2007-01-13  2:58 Von Wolher
  2007-01-13  4:30 ` Randy Dunlap
  0 siblings, 1 reply; 2+ messages in thread
From: Von Wolher @ 2007-01-13  2:58 UTC (permalink / raw)
  To: LKML

Hi,

I just build a 2.6.19.1 vanilla kernel based on the previous config
(make oldconfig) but for some reason it is not starting. Despite
following the usual procedure with lilo like many times before it seems
that lilo tries to boot it and jumps back to the menu screen.

But selecting the old kernel boots just fine.

Any one can advise on what could cause such behaviour beside the obvious
 steps like did i run lilo after kernel compile, check paths ...

Thanks

Mark

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: 2.6.19.1 failing
  2007-01-13  2:58 2.6.19.1 failing Von Wolher
@ 2007-01-13  4:30 ` Randy Dunlap
  0 siblings, 0 replies; 2+ messages in thread
From: Randy Dunlap @ 2007-01-13  4:30 UTC (permalink / raw)
  To: Von Wolher; +Cc: LKML

On Sat, 13 Jan 2007 03:58:19 +0100 Von Wolher wrote:

> Hi,
> 
> I just build a 2.6.19.1 vanilla kernel based on the previous config
> (make oldconfig) but for some reason it is not starting. Despite
> following the usual procedure with lilo like many times before it seems
> that lilo tries to boot it and jumps back to the menu screen.

Was your previous config 2.6.18* or 2.6.19?
If it was 2.6.18* and you are using SATA, the config symbol
names for SATA changed and you'll need set them via make *config.

Otherwise we'll probably need more info.

> But selecting the old kernel boots just fine.
> 
> Any one can advise on what could cause such behaviour beside the obvious
>  steps like did i run lilo after kernel compile, check paths ...


---
~Randy

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2007-01-13  4:31 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-01-13  2:58 2.6.19.1 failing Von Wolher
2007-01-13  4:30 ` Randy Dunlap

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).