LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH] Kdump documentation update for 2.6.20: ia64 portion
@ 2007-01-12  6:07 Horms
  2007-01-12  8:34 ` Zou, Nanhai
  0 siblings, 1 reply; 7+ messages in thread
From: Horms @ 2007-01-12  6:07 UTC (permalink / raw)
  To: Vivek Goyal
  Cc: Mohan Kumar M, Andrew Morton, Nanhai Zou, Tony Luck,
	linux-kernel, fastboot, linux-ia64

Hi,

this patch fills in the portions for ia64 kexec.

I'm actually not sure what options are required for the dump-capture
kernel, but "init 1 irqpoll maxcpus=1" has been working fine for me.
Or more to the point, I'm not sure if irqpoll is needed or not.

This patch requires the documentation patch update that Vivek Goyal has
been circulating, and I believe is currently in mm. Feel free to fold it
into that change if it makes things easier for anyone.

Signed-off-by: Simon Horman <horms@verge.net.au>

Index: linux-2.6/Documentation/kdump/kdump.txt
===================================================================
--- linux-2.6.orig/Documentation/kdump/kdump.txt	2007-01-12 14:37:46.000000000 +0900
+++ linux-2.6/Documentation/kdump/kdump.txt	2007-01-12 14:46:53.000000000 +0900
@@ -17,7 +17,7 @@
 memory image to a dump file on the local disk, or across the network to
 a remote system.
 
-Kdump and kexec are currently supported on the x86, x86_64, ppc64 and IA64
+Kdump and kexec are currently supported on the x86, x86_64, ppc64 and ia64
 architectures.
 
 When the system kernel boots, it reserves a small section of memory for
@@ -227,7 +227,11 @@
 
 Dump-capture kernel config options (Arch Dependent, ia64)
 ----------------------------------------------------------
-(To be filled)
+
+- No specific options are required to create a dump-capture kernel
+  for ia64 other than those specified in the arch idependent section
+  above. This means that it is possible to use the system kernel
+  as a dump-capture kernel if desired.
 
 
 Boot into System Kernel
@@ -264,7 +268,8 @@
 For ppc64:
 	- Use vmlinux
 For ia64:
-	(To be filled)
+	- Use vmlinux
+
 
 If you are using a uncompressed vmlinux image then use following command
 to load dump-capture kernel.
@@ -280,18 +285,19 @@
    --initrd=<initrd-for-dump-capture-kernel> \
    --append="root=<root-dev> <arch-specific-options>"
 
+Please note, that --args-linux does not need to be specified for ia64.
+It is planned to make this a no-op on that architecture, but for now
+it should be omitted
+
 Following are the arch specific command line options to be used while
 loading dump-capture kernel.
 
-For i386 and x86_64:
+For i386, x86_64 and ia64:
 	"init 1 irqpoll maxcpus=1"
 
 For ppc64:
 	"init 1 maxcpus=1 noirqdistrib"
 
-For IA64
-	(To be filled)
-
 
 Notes on loading the dump-capture kernel:
 

^ permalink raw reply	[flat|nested] 7+ messages in thread

* RE: [PATCH] Kdump documentation update for 2.6.20: ia64 portion
  2007-01-12  6:07 [PATCH] Kdump documentation update for 2.6.20: ia64 portion Horms
@ 2007-01-12  8:34 ` Zou, Nanhai
  2007-01-12  9:00   ` Horms
  0 siblings, 1 reply; 7+ messages in thread
From: Zou, Nanhai @ 2007-01-12  8:34 UTC (permalink / raw)
  To: Horms, Vivek Goyal
  Cc: Mohan Kumar M, Andrew Morton, Luck, Tony, linux-kernel, fastboot,
	linux-ia64


> -----Original Message-----
> From: linux-ia64-owner@vger.kernel.org
> [mailto:linux-ia64-owner@vger.kernel.org] On Behalf Of Horms
> Sent: 2007年1月12日 14:07
> To: Vivek Goyal
> Cc: Mohan Kumar M; Andrew Morton; Zou, Nanhai; Luck, Tony;
> linux-kernel@vger.kernel.org; fastboot@lists.osdl.org;
> linux-ia64@vger.kernel.org
> Subject: [PATCH] Kdump documentation update for 2.6.20: ia64 portion
> 
> Hi,
> 
> this patch fills in the portions for ia64 kexec.
> 
> I'm actually not sure what options are required for the dump-capture
> kernel, but "init 1 irqpoll maxcpus=1" has been working fine for me.
> Or more to the point, I'm not sure if irqpoll is needed or not.
> 
> This patch requires the documentation patch update that Vivek Goyal has
> been circulating, and I believe is currently in mm. Feel free to fold it
> into that change if it makes things easier for anyone.
> 
> Signed-off-by: Simon Horman <horms@verge.net.au>
> 
> Index: linux-2.6/Documentation/kdump/kdump.txt
> ===================================================================
> --- linux-2.6.orig/Documentation/kdump/kdump.txt	2007-01-12
> 14:37:46.000000000 +0900
> +++ linux-2.6/Documentation/kdump/kdump.txt	2007-01-12
> 14:46:53.000000000 +0900
> @@ -17,7 +17,7 @@
>  memory image to a dump file on the local disk, or across the network to
>  a remote system.
> 
> -Kdump and kexec are currently supported on the x86, x86_64, ppc64 and IA64
> +Kdump and kexec are currently supported on the x86, x86_64, ppc64 and ia64
>  architectures.
> 
>  When the system kernel boots, it reserves a small section of memory for
> @@ -227,7 +227,11 @@
> 
>  Dump-capture kernel config options (Arch Dependent, ia64)
>  ----------------------------------------------------------
> -(To be filled)
> +
> +- No specific options are required to create a dump-capture kernel
> +  for ia64 other than those specified in the arch idependent section
> +  above. This means that it is possible to use the system kernel
> +  as a dump-capture kernel if desired.
> 
> 
>  Boot into System Kernel
> @@ -264,7 +268,8 @@
>  For ppc64:
>  	- Use vmlinux
>  For ia64:
> -	(To be filled)
> +	- Use vmlinux
> +
  You can also use gziped vmlinux.gz here.
> 
>  If you are using a uncompressed vmlinux image then use following command
>  to load dump-capture kernel.
> @@ -280,18 +285,19 @@
>     --initrd=<initrd-for-dump-capture-kernel> \
>     --append="root=<root-dev> <arch-specific-options>"
> 
> +Please note, that --args-linux does not need to be specified for ia64.
> +It is planned to make this a no-op on that architecture, but for now
> +it should be omitted
> +
>  Following are the arch specific command line options to be used while
>  loading dump-capture kernel.
> 
> -For i386 and x86_64:
> +For i386, x86_64 and ia64:
>  	"init 1 irqpoll maxcpus=1"
> 
>  For ppc64:
>  	"init 1 maxcpus=1 noirqdistrib"
> 
> -For IA64
> -	(To be filled)
> -
> 
>  Notes on loading the dump-capture kernel:
> 
   We can add note about that IA64 can automatically pick crash dump region according to size to reserve.

Thanks
Zou Nan hai

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH] Kdump documentation update for 2.6.20: ia64 portion
  2007-01-12  8:34 ` Zou, Nanhai
@ 2007-01-12  9:00   ` Horms
  2007-01-12 10:33     ` Andreas Schwab
  2007-01-12 19:46     ` [Fastboot] " Jay Lan
  0 siblings, 2 replies; 7+ messages in thread
From: Horms @ 2007-01-12  9:00 UTC (permalink / raw)
  To: Zou, Nanhai
  Cc: Vivek Goyal, Mohan Kumar M, Andrew Morton, Luck, Tony,
	linux-kernel, fastboot, linux-ia64

Hi,

this patch fills in the portions for ia64 kexec.

I'm actually not sure what options are required for the dump-capture
kernel, but "init 1 irqpoll maxcpus=1" has been working fine for me.
Or more to the point, I'm not sure if irqpoll is needed or not.

This patch requires the documentation patch update that Vivek Goyal has
been circulating, and I believe is currently in mm. Feel free to fold it
into that change if it makes things easier for anyone.

Take II

Nanhai,

I have noted that vmlinux.gz may also be used. And added a note about the
kernel being able to automatically place the crashkernel region.
Furthermore, I added a note that if manually specified, the region should
be 64Mb aligned to avoid wastage. I notice that the auto placement code
uses 64Mb. But is this strictly neccessary for all page sizes?

Signed-off-by: Simon Horman <horms@verge.net.au>

Index: linux-2.6/Documentation/kdump/kdump.txt
===================================================================
--- linux-2.6.orig/Documentation/kdump/kdump.txt	2007-01-12 17:45:19.000000000 +0900
+++ linux-2.6/Documentation/kdump/kdump.txt	2007-01-12 17:59:42.000000000 +0900
@@ -17,7 +17,7 @@
 memory image to a dump file on the local disk, or across the network to
 a remote system.
 
-Kdump and kexec are currently supported on the x86, x86_64, ppc64 and IA64
+Kdump and kexec are currently supported on the x86, x86_64, ppc64 and ia64
 architectures.
 
 When the system kernel boots, it reserves a small section of memory for
@@ -229,7 +229,23 @@
 
 Dump-capture kernel config options (Arch Dependent, ia64)
 ----------------------------------------------------------
-(To be filled)
+
+- No specific options are required to create a dump-capture kernel
+  for ia64, other than those specified in the arch idependent section
+  above. This means that it is possible to use the system kernel
+  as a dump-capture kernel if desired.
+  
+  The crashkernel region can be automatically placed by the system
+  kernel at run time. This is done by specifying the base address as 0,
+  or omitting it all together.
+
+  crashkernel=256M@0
+  or
+  crashkernel=256M
+
+  If the start address is specified, not that the start address of the
+  kernel will be alligned to 64Mb, so any if the start address is not then
+  any space below the alignment point will be wasted.
 
 
 Boot into System Kernel
@@ -248,6 +264,10 @@
 
    On ppc64, use "crashkernel=128M@32M".
 
+   On ia64, 256M@256M is a generous value that typically works.
+   The region may be automatically placed on ia64, see the
+   dump-capture kernel config option notes above.
+
 Load the Dump-capture Kernel
 ============================
 
@@ -266,7 +286,8 @@
 For ppc64:
 	- Use vmlinux
 For ia64:
-	(To be filled)
+	- Use vmlinux or vmlinuz.gz
+
 
 If you are using a uncompressed vmlinux image then use following command
 to load dump-capture kernel.
@@ -282,18 +303,19 @@
    --initrd=<initrd-for-dump-capture-kernel> \
    --append="root=<root-dev> <arch-specific-options>"
 
+Please note, that --args-linux does not need to be specified for ia64.
+It is planned to make this a no-op on that architecture, but for now
+it should be omitted
+
 Following are the arch specific command line options to be used while
 loading dump-capture kernel.
 
-For i386 and x86_64:
+For i386, x86_64 and ia64:
 	"init 1 irqpoll maxcpus=1"
 
 For ppc64:
 	"init 1 maxcpus=1 noirqdistrib"
 
-For IA64
-	(To be filled)
-
 
 Notes on loading the dump-capture kernel:
 

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH] Kdump documentation update for 2.6.20: ia64 portion
  2007-01-12  9:00   ` Horms
@ 2007-01-12 10:33     ` Andreas Schwab
  2007-01-13  4:05       ` Horms
  2007-01-12 19:46     ` [Fastboot] " Jay Lan
  1 sibling, 1 reply; 7+ messages in thread
From: Andreas Schwab @ 2007-01-12 10:33 UTC (permalink / raw)
  To: Horms
  Cc: Zou, Nanhai, Vivek Goyal, Mohan Kumar M, Andrew Morton, Luck,
	Tony, linux-kernel, fastboot, linux-ia64

Horms <horms@verge.net.au> writes:

> +  If the start address is specified, not that the start address of the
                                        note
> +  kernel will be alligned to 64Mb, so any if the start address is not then
                    aligned              XXX
> +  any space below the alignment point will be wasted.

Andreas.

-- 
Andreas Schwab, SuSE Labs, schwab@suse.de
SuSE Linux Products GmbH, Maxfeldstraße 5, 90409 Nürnberg, Germany
PGP key fingerprint = 58CA 54C7 6D53 942B 1756  01D3 44D5 214B 8276 4ED5
"And now for something completely different."

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [Fastboot] [PATCH] Kdump documentation update for 2.6.20: ia64 portion
  2007-01-12  9:00   ` Horms
  2007-01-12 10:33     ` Andreas Schwab
@ 2007-01-12 19:46     ` Jay Lan
  2007-01-13  4:03       ` Horms
  1 sibling, 1 reply; 7+ messages in thread
From: Jay Lan @ 2007-01-12 19:46 UTC (permalink / raw)
  To: Horms
  Cc: Zou, Nanhai, Andrew Morton, linux-ia64, Luck, Tony, fastboot,
	linux-kernel

Horms wrote:
> Hi,
> 
> this patch fills in the portions for ia64 kexec.
> 
> I'm actually not sure what options are required for the dump-capture
> kernel, but "init 1 irqpoll maxcpus=1" has been working fine for me.
> Or more to the point, I'm not sure if irqpoll is needed or not.
> 
> This patch requires the documentation patch update that Vivek Goyal has
> been circulating, and I believe is currently in mm. Feel free to fold it
> into that change if it makes things easier for anyone.
> 
> Take II
> 
> Nanhai,
> 
> I have noted that vmlinux.gz may also be used. And added a note about the
> kernel being able to automatically place the crashkernel region.
> Furthermore, I added a note that if manually specified, the region should
> be 64Mb aligned to avoid wastage. I notice that the auto placement code
> uses 64Mb. But is this strictly neccessary for all page sizes?
> 
> Signed-off-by: Simon Horman <horms@verge.net.au>
> 
> Index: linux-2.6/Documentation/kdump/kdump.txt
> ===================================================================
> --- linux-2.6.orig/Documentation/kdump/kdump.txt	2007-01-12 17:45:19.000000000 +0900
> +++ linux-2.6/Documentation/kdump/kdump.txt	2007-01-12 17:59:42.000000000 +0900
> @@ -17,7 +17,7 @@
>  memory image to a dump file on the local disk, or across the network to
>  a remote system.
>  
> -Kdump and kexec are currently supported on the x86, x86_64, ppc64 and IA64
> +Kdump and kexec are currently supported on the x86, x86_64, ppc64 and ia64
>  architectures.
>  
>  When the system kernel boots, it reserves a small section of memory for
> @@ -229,7 +229,23 @@
>  
>  Dump-capture kernel config options (Arch Dependent, ia64)
>  ----------------------------------------------------------
> -(To be filled)
> +
> +- No specific options are required to create a dump-capture kernel
> +  for ia64, other than those specified in the arch idependent section
> +  above. This means that it is possible to use the system kernel
> +  as a dump-capture kernel if desired.
> +  
> +  The crashkernel region can be automatically placed by the system
> +  kernel at run time. This is done by specifying the base address as 0,
> +  or omitting it all together.

In my testing, i found the base address was ignored. Whatever value
specified was fine. Not necessary to be 0. But i guess it is fine to
give people a guideline telling them to specify 0.

Cheers,
 - jay


> +
> +  crashkernel=256M@0
> +  or
> +  crashkernel=256M
> +
> +  If the start address is specified, not that the start address of the
> +  kernel will be alligned to 64Mb, so any if the start address is not then
> +  any space below the alignment point will be wasted.
>  
>  
>  Boot into System Kernel
> @@ -248,6 +264,10 @@
>  
>     On ppc64, use "crashkernel=128M@32M".
>  
> +   On ia64, 256M@256M is a generous value that typically works.
> +   The region may be automatically placed on ia64, see the
> +   dump-capture kernel config option notes above.
> +
>  Load the Dump-capture Kernel
>  ============================
>  
> @@ -266,7 +286,8 @@
>  For ppc64:
>  	- Use vmlinux
>  For ia64:
> -	(To be filled)
> +	- Use vmlinux or vmlinuz.gz
> +
>  
>  If you are using a uncompressed vmlinux image then use following command
>  to load dump-capture kernel.
> @@ -282,18 +303,19 @@
>     --initrd=<initrd-for-dump-capture-kernel> \
>     --append="root=<root-dev> <arch-specific-options>"
>  
> +Please note, that --args-linux does not need to be specified for ia64.
> +It is planned to make this a no-op on that architecture, but for now
> +it should be omitted
> +
>  Following are the arch specific command line options to be used while
>  loading dump-capture kernel.
>  
> -For i386 and x86_64:
> +For i386, x86_64 and ia64:
>  	"init 1 irqpoll maxcpus=1"
>  
>  For ppc64:
>  	"init 1 maxcpus=1 noirqdistrib"
>  
> -For IA64
> -	(To be filled)
> -
>  
>  Notes on loading the dump-capture kernel:
>  
> _______________________________________________
> fastboot mailing list
> fastboot@lists.osdl.org
> https://lists.osdl.org/mailman/listinfo/fastboot


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [Fastboot] [PATCH] Kdump documentation update for 2.6.20: ia64 portion
  2007-01-12 19:46     ` [Fastboot] " Jay Lan
@ 2007-01-13  4:03       ` Horms
  0 siblings, 0 replies; 7+ messages in thread
From: Horms @ 2007-01-13  4:03 UTC (permalink / raw)
  To: Jay Lan
  Cc: Zou, Nanhai, Andrew Morton, linux-ia64, Luck, Tony, fastboot,
	linux-kernel

On Fri, Jan 12, 2007 at 11:46:39AM -0800, Jay Lan wrote:
> Horms wrote:
> > Hi,
> > 
> > this patch fills in the portions for ia64 kexec.
> > 
> > I'm actually not sure what options are required for the dump-capture
> > kernel, but "init 1 irqpoll maxcpus=1" has been working fine for me.
> > Or more to the point, I'm not sure if irqpoll is needed or not.
> > 
> > This patch requires the documentation patch update that Vivek Goyal has
> > been circulating, and I believe is currently in mm. Feel free to fold it
> > into that change if it makes things easier for anyone.
> > 
> > Take II
> > 
> > Nanhai,
> > 
> > I have noted that vmlinux.gz may also be used. And added a note about the
> > kernel being able to automatically place the crashkernel region.
> > Furthermore, I added a note that if manually specified, the region should
> > be 64Mb aligned to avoid wastage. I notice that the auto placement code
> > uses 64Mb. But is this strictly neccessary for all page sizes?
> > 
> > Signed-off-by: Simon Horman <horms@verge.net.au>
> > 
> > Index: linux-2.6/Documentation/kdump/kdump.txt
> > ===================================================================
> > --- linux-2.6.orig/Documentation/kdump/kdump.txt	2007-01-12 17:45:19.000000000 +0900
> > +++ linux-2.6/Documentation/kdump/kdump.txt	2007-01-12 17:59:42.000000000 +0900
> > @@ -17,7 +17,7 @@
> >  memory image to a dump file on the local disk, or across the network to
> >  a remote system.
> >  
> > -Kdump and kexec are currently supported on the x86, x86_64, ppc64 and IA64
> > +Kdump and kexec are currently supported on the x86, x86_64, ppc64 and ia64
> >  architectures.
> >  
> >  When the system kernel boots, it reserves a small section of memory for
> > @@ -229,7 +229,23 @@
> >  
> >  Dump-capture kernel config options (Arch Dependent, ia64)
> >  ----------------------------------------------------------
> > -(To be filled)
> > +
> > +- No specific options are required to create a dump-capture kernel
> > +  for ia64, other than those specified in the arch idependent section
> > +  above. This means that it is possible to use the system kernel
> > +  as a dump-capture kernel if desired.
> > +  
> > +  The crashkernel region can be automatically placed by the system
> > +  kernel at run time. This is done by specifying the base address as 0,
> > +  or omitting it all together.
> 
> In my testing, i found the base address was ignored. Whatever value
> specified was fine. Not necessary to be 0. But i guess it is fine to
> give people a guideline telling them to specify 0.

I submitted a patch to honour non-zero base addresses,
I'm pretty sure it is in there now.

-- 
Horms
  H: http://www.vergenet.net/~horms/
  W: http://www.valinux.co.jp/en/


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH] Kdump documentation update for 2.6.20: ia64 portion
  2007-01-12 10:33     ` Andreas Schwab
@ 2007-01-13  4:05       ` Horms
  0 siblings, 0 replies; 7+ messages in thread
From: Horms @ 2007-01-13  4:05 UTC (permalink / raw)
  To: Andreas Schwab
  Cc: Zou, Nanhai, Vivek Goyal, Mohan Kumar M, Andrew Morton, Luck,
	Tony, linux-kernel, fastboot, linux-ia64

Hi,

this patch fills in the portions for ia64 kexec.

I'm actually not sure what options are required for the dump-capture
kernel, but "init 1 irqpoll maxcpus=1" has been working fine for me.
Or more to the point, I'm not sure if irqpoll is needed or not.

This patch requires the documentation patch update that Vivek Goyal has
been circulating, and I believe is currently in mm. Feel free to fold it
into that change if it makes things easier for anyone.

Take II

Nanhai,

I have noted that vmlinux.gz may also be used. And added a note about the
kernel being able to automatically place the crashkernel region.
Furthermore, I added a note that if manually specified, the region should
be 64Mb aligned to avoid wastage. I notice that the auto placement code
uses 64Mb. But is this strictly neccessary for all page sizes?

Take III

Fixed some typos, thaniks to Andreas Schwab

Signed-off-by: Simon Horman <horms@verge.net.au>

Index: linux-2.6/Documentation/kdump/kdump.txt
===================================================================
--- linux-2.6.orig/Documentation/kdump/kdump.txt	2007-01-12 17:45:19.000000000 +0900
+++ linux-2.6/Documentation/kdump/kdump.txt	2007-01-12 17:59:42.000000000 +0900
@@ -17,7 +17,7 @@
 memory image to a dump file on the local disk, or across the network to
 a remote system.
 
-Kdump and kexec are currently supported on the x86, x86_64, ppc64 and IA64
+Kdump and kexec are currently supported on the x86, x86_64, ppc64 and ia64
 architectures.
 
 When the system kernel boots, it reserves a small section of memory for
@@ -229,7 +229,23 @@
 
 Dump-capture kernel config options (Arch Dependent, ia64)
 ----------------------------------------------------------
-(To be filled)
+
+- No specific options are required to create a dump-capture kernel
+  for ia64, other than those specified in the arch idependent section
+  above. This means that it is possible to use the system kernel
+  as a dump-capture kernel if desired.
+  
+  The crashkernel region can be automatically placed by the system
+  kernel at run time. This is done by specifying the base address as 0,
+  or omitting it all together.
+
+  crashkernel=256M@0
+  or
+  crashkernel=256M
+
+  If the start address is specified, note that the start address of the
+  kernel will be aligned to 64Mb, so if the start address is not then
+  any space below the alignment point will be wasted.
 
 
 Boot into System Kernel
@@ -248,6 +264,10 @@
 
    On ppc64, use "crashkernel=128M@32M".
 
+   On ia64, 256M@256M is a generous value that typically works.
+   The region may be automatically placed on ia64, see the
+   dump-capture kernel config option notes above.
+
 Load the Dump-capture Kernel
 ============================
 
@@ -266,7 +286,8 @@
 For ppc64:
 	- Use vmlinux
 For ia64:
-	(To be filled)
+	- Use vmlinux or vmlinuz.gz
+
 
 If you are using a uncompressed vmlinux image then use following command
 to load dump-capture kernel.
@@ -282,18 +303,19 @@
    --initrd=<initrd-for-dump-capture-kernel> \
    --append="root=<root-dev> <arch-specific-options>"
 
+Please note, that --args-linux does not need to be specified for ia64.
+It is planned to make this a no-op on that architecture, but for now
+it should be omitted
+
 Following are the arch specific command line options to be used while
 loading dump-capture kernel.
 
-For i386 and x86_64:
+For i386, x86_64 and ia64:
 	"init 1 irqpoll maxcpus=1"
 
 For ppc64:
 	"init 1 maxcpus=1 noirqdistrib"
 
-For IA64
-	(To be filled)
-
 
 Notes on loading the dump-capture kernel:
 

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2007-01-13  4:06 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-01-12  6:07 [PATCH] Kdump documentation update for 2.6.20: ia64 portion Horms
2007-01-12  8:34 ` Zou, Nanhai
2007-01-12  9:00   ` Horms
2007-01-12 10:33     ` Andreas Schwab
2007-01-13  4:05       ` Horms
2007-01-12 19:46     ` [Fastboot] " Jay Lan
2007-01-13  4:03       ` Horms

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).