Re: 2.6.20-rc4: usb somehow broken

[Prakash Punnoor <prakash@punnoor.de>]

[-- Attachment #1: Type: text/plain, Size: 2126 bytes --]

Am Donnerstag 11 Januar 2007 18:28 schrieb Oliver Neukum:
> Am Donnerstag, 11. Januar 2007 18:20 schrieb Prakash Punnoor:
> > Hi,
> >
> > I can't scan anymore. :-( I don't know which rc kernel introduced it, but
> > this are the messages I get (w/o touching the device/usb cable except
> > pluggin it in for the first time):
> >
> > usb 1-1.2: new full speed USB device using ehci_hcd and address 4
> > ehci_hcd 0000:00:0b.1: qh ffff81007bc6c280 (#00) state 4
> > usb 1-1.2: configuration #1 chosen from 1 choice
> > usb 1-1.2: USB disconnect, address 4
> > usb 1-1.2: new full speed USB device using ehci_hcd and address 5
> > usb 1-1.2: configuration #1 chosen from 1 choice
> > usb 1-1.2: USB disconnect, address 5
> > usb 1-1.2: new full speed USB device using ehci_hcd and address 6
> > usb 1-1.2: configuration #1 chosen from 1 choice
> > usb 1-1.2: USB disconnect, address 6
> > usb 1-1.2: new full speed USB device using ehci_hcd and address 7
> > usb 1-1.2: configuration #1 chosen from 1 choice
> > usb 1-1.2: USB disconnect, address 7
> > usb 1-1.2: new full speed USB device using ehci_hcd and address 8
> > usb 1-1.2: configuration #1 chosen from 1 choice
> >
> >
> > Shouldn't the ohci module handle the scanner? The scanner is connected
> > through a hub.
>
> Therefore it goes to EHCI. Can you try a direct connection?
>
> > I don't remember how 2.6.19 handled it, or whether I used some new exotic
> > setting which causes the breakage.
>
> Could you try 2.6.19?
>
> > Well, I'll test this week-end and upload more infos then. If you already
> > have some ideas in the meantime, let me know.
>
> Please test with CONFIG_USB_DEBUG


Hi, I did more tests and I was wrong about "broken". It seems more a time-out 
problem, ie if I try to use sane again in short intervalls, I will get my 
device working. The cause seems CONFIG_USB_SUSPEND=y. With 2.6.20-rc5 the 
situation seems better, ie now I don't get "no device" very less often.

So do you still want me to try above stuff?

-- 
(°=                 =°)
//\ Prakash Punnoor /\\
V_/                 \_V

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]