LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH 15/15] ide: add ide_tune_dma() helper
Date: Fri, 19 Jan 2007 01:32:40 +0100	[thread overview]
Message-ID: <20070119003240.14846.32464.sendpatchset@localhost.localdomain> (raw)
In-Reply-To: <20070119003058.14846.43637.sendpatchset@localhost.localdomain>

[PATCH] ide: add ide_tune_dma() helper

After reworking the code responsible for selecting the best DMA
transfer mode it is now possible to add generic ide_tune_dma() helper.

Convert some IDE PCI host drivers to use it (the ones left need more work).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

---
 drivers/ide/ide-dma.c      |   20 ++++++++++++++++++++
 drivers/ide/pci/aec62xx.c  |   13 +------------
 drivers/ide/pci/atiixp.c   |   22 +---------------------
 drivers/ide/pci/cs5535.c   |   15 +--------------
 drivers/ide/pci/hpt34x.c   |   20 +-------------------
 drivers/ide/pci/hpt366.c   |   20 +-------------------
 drivers/ide/pci/it8213.c   |   21 +--------------------
 drivers/ide/pci/jmicron.c  |   21 +--------------------
 drivers/ide/pci/piix.c     |   26 +-------------------------
 drivers/ide/pci/sis5513.c  |   21 +--------------------
 drivers/ide/pci/slc90e66.c |   13 +------------
 drivers/ide/pci/tc86c001.c |   13 +------------
 drivers/ide/pci/triflex.c  |   13 +------------
 include/linux/ide.h        |    2 ++
 14 files changed, 34 insertions(+), 206 deletions(-)

Index: b/drivers/ide/ide-dma.c
===================================================================
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -779,6 +779,26 @@ u8 ide_max_dma_mode(ide_drive_t *drive)
 
 EXPORT_SYMBOL_GPL(ide_max_dma_mode);
 
+int ide_tune_dma(ide_drive_t *drive)
+{
+	u8 speed;
+
+	/* TODO: use only ide_max_dma_mode() */
+	if (!ide_use_dma(drive))
+		return 0;
+
+	speed = ide_max_dma_mode(drive);
+
+	if (!speed)
+		return 0;
+
+	drive->hwif->speedproc(drive, speed);
+
+	return ide_dma_enable(drive);
+}
+
+EXPORT_SYMBOL_GPL(ide_tune_dma);
+
 void ide_dma_verbose(ide_drive_t *drive)
 {
 	struct hd_driveid *id	= drive->id;
Index: b/drivers/ide/pci/aec62xx.c
===================================================================
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -154,17 +154,6 @@ static int aec62xx_tune_chipset (ide_dri
 	}
 }
 
-static int config_chipset_for_dma (ide_drive_t *drive)
-{
-	u8 speed = ide_max_dma_mode(drive);
-
-	if (!(speed))
-		return 0;
-
-	(void) aec62xx_tune_chipset(drive, speed);
-	return ide_dma_enable(drive);
-}
-
 static void aec62xx_tune_drive (ide_drive_t *drive, u8 pio)
 {
 	u8 speed = 0;
@@ -183,7 +172,7 @@ static void aec62xx_tune_drive (ide_driv
 
 static int aec62xx_config_drive_xfer_rate (ide_drive_t *drive)
 {
-	if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+	if (ide_tune_dma(drive))
 		return 0;
 
 	if (ide_use_fast_pio(drive))
Index: b/drivers/ide/pci/atiixp.c
===================================================================
--- a/drivers/ide/pci/atiixp.c
+++ b/drivers/ide/pci/atiixp.c
@@ -207,26 +207,6 @@ static int atiixp_speedproc(ide_drive_t 
 }
 
 /**
- *	atiixp_config_drive_for_dma	-	configure drive for DMA
- *	@drive: IDE drive to configure
- *
- *	Set up a ATIIXP interface channel for the best available speed.
- *	We prefer UDMA if it is available and then MWDMA. If DMA is
- *	not available we switch to PIO and return 0.
- */
-
-static int atiixp_config_drive_for_dma(ide_drive_t *drive)
-{
-	u8 speed = ide_max_dma_mode(drive);
-
-	if (!speed)
-		return 0;
-
-	(void) atiixp_speedproc(drive, speed);
-	return ide_dma_enable(drive);
-}
-
-/**
  *	atiixp_dma_check	-	set up an IDE device
  *	@drive: IDE drive to configure
  *
@@ -240,7 +220,7 @@ static int atiixp_dma_check(ide_drive_t 
 
 	drive->init_speed = 0;
 
-	if (ide_use_dma(drive) && atiixp_config_drive_for_dma(drive))
+	if (ide_tune_dma(drive))
 		return 0;
 
 	if (ide_use_fast_pio(drive)) {
Index: b/drivers/ide/pci/cs5535.c
===================================================================
--- a/drivers/ide/pci/cs5535.c
+++ b/drivers/ide/pci/cs5535.c
@@ -164,26 +164,13 @@ static void cs5535_tuneproc(ide_drive_t 
 	cs5535_set_speed(drive, xferspeed);
 }
 
-static int cs5535_config_drive_for_dma(ide_drive_t *drive)
-{
-	u8 speed = ide_max_dma_mode(drive);
-
-	/* If no DMA speed was available then let dma_check hit pio */
-	if (!speed) {
-		return 0;
-	}
-
-	cs5535_set_drive(drive, speed);
-	return ide_dma_enable(drive);
-}
-
 static int cs5535_dma_check(ide_drive_t *drive)
 {
 	u8 speed;
 
 	drive->init_speed = 0;
 
-	if (ide_use_dma(drive) && cs5535_config_drive_for_dma(drive))
+	if (ide_tune_dma(drive))
 		return 0;
 
 	if (ide_use_fast_pio(drive)) {
Index: b/drivers/ide/pci/hpt34x.c
===================================================================
--- a/drivers/ide/pci/hpt34x.c
+++ b/drivers/ide/pci/hpt34x.c
@@ -84,29 +84,11 @@ static void hpt34x_tune_drive (ide_drive
 	(void) hpt34x_tune_chipset(drive, (XFER_PIO_0 + pio));
 }
 
-/*
- * This allows the configuration of ide_pci chipset registers
- * for cards that learn about the drive's UDMA, DMA, PIO capabilities
- * after the drive is reported by the OS.  Initially for designed for
- * HPT343 UDMA chipset by HighPoint|Triones Technologies, Inc.
- */
-
-static int config_chipset_for_dma (ide_drive_t *drive)
-{
-	u8 speed = ide_max_dma_mode(drive);
-
-	if (!(speed))
-		return 0;
-
-	(void) hpt34x_tune_chipset(drive, speed);
-	return ide_dma_enable(drive);
-}
-
 static int hpt34x_config_drive_xfer_rate (ide_drive_t *drive)
 {
 	drive->init_speed = 0;
 
-	if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+	if (ide_tune_dma(drive))
 #ifndef CONFIG_HPT34X_AUTODMA
 		return -1;
 #else
Index: b/drivers/ide/pci/hpt366.c
===================================================================
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -668,24 +668,6 @@ static void hpt3xx_tune_drive(ide_drive_
 	(void) hpt3xx_tune_chipset (drive, XFER_PIO_0 + pio);
 }
 
-/*
- * This allows the configuration of ide_pci chipset registers
- * for cards that learn about the drive's UDMA, DMA, PIO capabilities
- * after the drive is reported by the OS.  Initially designed for
- * HPT366 UDMA chipset by HighPoint|Triones Technologies, Inc.
- *
- */
-static int config_chipset_for_dma(ide_drive_t *drive)
-{
-	u8 speed = ide_max_dma_mode(drive);
-
-	if (!speed)
-		return 0;
-
-	(void) hpt3xx_tune_chipset(drive, speed);
-	return ide_dma_enable(drive);
-}
-
 static int hpt3xx_quirkproc(ide_drive_t *drive)
 {
 	struct hd_driveid *id	= drive->id;
@@ -740,7 +722,7 @@ static int hpt366_config_drive_xfer_rate
 {
 	drive->init_speed = 0;
 
-	if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+	if (ide_tune_dma(drive))
 		return 0;
 
 	if (ide_use_fast_pio(drive))
Index: b/drivers/ide/pci/it8213.c
===================================================================
--- a/drivers/ide/pci/it8213.c
+++ b/drivers/ide/pci/it8213.c
@@ -197,25 +197,6 @@ static int it8213_tune_chipset (ide_driv
 	return ide_config_drive_speed(drive, speed);
 }
 
-/*
- *	config_chipset_for_dma	-	configure for DMA
- *	@drive: drive to configure
- *
- *	Called by the IDE layer when it wants the timings set up.
- */
-
-static int config_chipset_for_dma (ide_drive_t *drive)
-{
-	u8 speed = ide_max_dma_mode(drive);
-
-	if (!speed)
-		return 0;
-
-	it8213_tune_chipset(drive, speed);
-
-	return ide_dma_enable(drive);
-}
-
 /**
  *	it8213_configure_drive_for_dma	-	set up for DMA transfers
  *	@drive: drive we are going to set up
@@ -230,7 +211,7 @@ static int it8213_config_drive_for_dma (
 {
 	u8 pio;
 
-	if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+	if (ide_tune_dma(drive))
 		return 0;
 
 	pio = ide_get_best_pio_mode(drive, 255, 4, NULL);
Index: b/drivers/ide/pci/jmicron.c
===================================================================
--- a/drivers/ide/pci/jmicron.c
+++ b/drivers/ide/pci/jmicron.c
@@ -119,25 +119,6 @@ static int jmicron_tune_chipset (ide_dri
 }
 
 /**
- *	config_chipset_for_dma	-	configure for DMA
- *	@drive: drive to configure
- *
- *	As the JMicron snoops for timings all we actually need to do is
- *	make sure we don't set an invalid mode.
- */
-
-static int config_chipset_for_dma (ide_drive_t *drive)
-{
-	u8 speed = ide_max_dma_mode(drive);
-
-	if (!speed)
-		return 0;
-
-	jmicron_tune_chipset(drive, speed);
-	return ide_dma_enable(drive);
-}
-
-/**
  *	jmicron_configure_drive_for_dma	-	set up for DMA transfers
  *	@drive: drive we are going to set up
  *
@@ -147,7 +128,7 @@ static int config_chipset_for_dma (ide_d
 
 static int jmicron_config_drive_for_dma (ide_drive_t *drive)
 {
-	if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+	if (ide_tune_dma(drive))
 		return 0;
 
 	config_jmicron_chipset_for_pio(drive, 1);
Index: b/drivers/ide/pci/piix.c
===================================================================
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -291,30 +291,6 @@ static int piix_tune_chipset (ide_drive_
 }
 
 /**
- *	piix_config_drive_for_dma	-	configure drive for DMA
- *	@drive: IDE drive to configure
- *
- *	Set up a PIIX interface channel for the best available speed.
- *	We prefer UDMA if it is available and then MWDMA.  If DMA is
- *	not available we switch to PIO and return 0.
- */
- 
-static int piix_config_drive_for_dma (ide_drive_t *drive)
-{
-	u8 speed = ide_max_dma_mode(drive);
-
-	/*
-	 * If no DMA speed was available or the chipset has DMA bugs
-	 * then disable DMA and use PIO
-	 */
-	if (!speed)
-		return 0;
-
-	(void) piix_tune_chipset(drive, speed);
-	return ide_dma_enable(drive);
-}
-
-/**
  *	piix_config_drive_xfer_rate	-	set up an IDE device
  *	@drive: IDE drive to configure
  *
@@ -326,7 +302,7 @@ static int piix_config_drive_xfer_rate (
 {
 	drive->init_speed = 0;
 
-	if (ide_use_dma(drive) && piix_config_drive_for_dma(drive))
+	if (ide_tune_dma(drive))
 		return 0;
 
 	if (ide_use_fast_pio(drive)) {
Index: b/drivers/ide/pci/sis5513.c
===================================================================
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -638,32 +638,13 @@ static void sis5513_tune_drive (ide_driv
 	(void) config_chipset_for_pio(drive, pio);
 }
 
-/*
- * ((id->hw_config & 0x4000|0x2000) && (HWIF(drive)->udma_four))
- */
-static int config_chipset_for_dma (ide_drive_t *drive)
-{
-	u8 speed = ide_max_dma_mode(drive);
-
-#ifdef DEBUG
-	printk("SIS5513: config_chipset_for_dma, drive %d, ultra %x\n",
-	       drive->dn, drive->id->dma_ultra);
-#endif
-
-	if (!(speed))
-		return 0;
-
-	sis5513_tune_chipset(drive, speed);
-	return ide_dma_enable(drive);
-}
-
 static int sis5513_config_xfer_rate(ide_drive_t *drive)
 {
 	config_art_rwp_pio(drive, 5);
 
 	drive->init_speed = 0;
 
-	if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+	if (ide_tune_dma(drive))
 		return 0;
 
 	if (ide_use_fast_pio(drive))
Index: b/drivers/ide/pci/slc90e66.c
===================================================================
--- a/drivers/ide/pci/slc90e66.c
+++ b/drivers/ide/pci/slc90e66.c
@@ -157,22 +157,11 @@ static int slc90e66_tune_chipset (ide_dr
 	return (ide_config_drive_speed(drive, speed));
 }
 
-static int slc90e66_config_drive_for_dma (ide_drive_t *drive)
-{
-	u8 speed = ide_max_dma_mode(drive);
-
-	if (!speed)
-		return 0;
-
-	(void) slc90e66_tune_chipset(drive, speed);
-	return ide_dma_enable(drive);
-}
-
 static int slc90e66_config_drive_xfer_rate (ide_drive_t *drive)
 {
 	drive->init_speed = 0;
 
-	if (ide_use_dma(drive) && slc90e66_config_drive_for_dma(drive))
+	if (ide_tune_dma(drive))
 		return 0;
 
 	if (ide_use_fast_pio(drive)) {
Index: b/drivers/ide/pci/tc86c001.c
===================================================================
--- a/drivers/ide/pci/tc86c001.c
+++ b/drivers/ide/pci/tc86c001.c
@@ -167,20 +167,9 @@ static int tc86c001_busproc(ide_drive_t 
 	return 0;
 }
 
-static int config_chipset_for_dma(ide_drive_t *drive)
-{
-	u8 speed = ide_max_dma_mode(drive);
-
-	if (!speed)
-		return 0;
-
-	(void) tc86c001_tune_chipset(drive, speed);
-	return ide_dma_enable(drive);
-}
-
 static int tc86c001_config_drive_xfer_rate(ide_drive_t *drive)
 {
-	if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+	if (ide_tune_dma(drive))
 		return 0;
 
 	if (ide_use_fast_pio(drive))
Index: b/drivers/ide/pci/triflex.c
===================================================================
--- a/drivers/ide/pci/triflex.c
+++ b/drivers/ide/pci/triflex.c
@@ -100,20 +100,9 @@ static void triflex_tune_drive(ide_drive
 	(void) triflex_tune_chipset(drive, (XFER_PIO_0 + use_pio));
 }
 
-static int triflex_config_drive_for_dma(ide_drive_t *drive)
-{
-	u8 speed = ide_max_dma_mode(drive);
-
-	if (!speed)
-		return 0;
-
-	(void) triflex_tune_chipset(drive, speed);
-	 return ide_dma_enable(drive);
-}
-
 static int triflex_config_drive_xfer_rate(ide_drive_t *drive)
 {
-	if (ide_use_dma(drive) && triflex_config_drive_for_dma(drive))
+	if (ide_tune_dma(drive))
 		return 0;
 
 	triflex_tune_drive(drive, 255);
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1275,6 +1275,7 @@ int __ide_dma_bad_drive(ide_drive_t *);
 int __ide_dma_good_drive(ide_drive_t *);
 int ide_use_dma(ide_drive_t *);
 u8 ide_max_dma_mode(ide_drive_t *);
+int ide_tune_dma(ide_drive_t *);
 void ide_dma_off(ide_drive_t *);
 void ide_dma_verbose(ide_drive_t *);
 int ide_set_dma(ide_drive_t *);
@@ -1302,6 +1303,7 @@ extern int __ide_dma_timeout(ide_drive_t
 #else
 static inline int ide_use_dma(ide_drive_t *drive) { return 0; }
 static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; }
+static inline int ide_tune_dma(ide_drive_t *drive) { return 0; }
 static inline void ide_dma_off(ide_drive_t *drive) { ; }
 static inline void ide_dma_verbose(ide_drive_t *drive) { ; }
 static inline int ide_set_dma(ide_drive_t *drive) { return 1; }

      parent reply	other threads:[~2007-01-19  0:29 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-01-19  0:30 [PATCH 0/15] IDE quilt tree updated Bartlomiej Zolnierkiewicz
2007-01-19  0:31 ` [PATCH 1/15] ACPI support for IDE devices Bartlomiej Zolnierkiewicz
2007-01-19  0:31 ` [PATCH 2/15] via82cxxx/pata_via: correct PCI_DEVICE_ID_VIA_SATA_EIDE ID and add support for CX700 and 8237S Bartlomiej Zolnierkiewicz
2007-01-19  0:31 ` [PATCH 3/15] it8213: fix build and ->ultra_mask Bartlomiej Zolnierkiewicz
2007-01-19  0:31 ` [PATCH 4/15] ide: convert ide_hwif_t.mmio into flag Bartlomiej Zolnierkiewicz
2007-01-19  0:31 ` [PATCH 5/15] hpt34x: hpt34x_tune_chipset() (->speedproc) fix Bartlomiej Zolnierkiewicz
2007-01-19  0:31 ` [PATCH 6/15] atiixp/jmicron/triflex: fix PIO fallback Bartlomiej Zolnierkiewicz
2007-01-19  0:31 ` [PATCH 7/15] piix: cleanup Bartlomiej Zolnierkiewicz
2007-01-19  0:31 ` [PATCH 8/15] ide: disable DMA in ->ide_dma_check for "no IORDY" case Bartlomiej Zolnierkiewicz
2007-01-19 16:26   ` Sergei Shtylyov
     [not found]     ` <58cb370e0701191047h524434eobdb9d86ed614bc71@mail.gmail.com>
2007-01-19 19:11       ` Bartlomiej Zolnierkiewicz
2007-01-19 19:35         ` Sergei Shtylyov
     [not found]           ` <58cb370e0701191200i10119313i4aacae9c504a02e4@mail.gmail.com>
2007-01-19 21:43             ` Bartlomiej Zolnierkiewicz
2007-01-20 17:09               ` Sergei Shtylyov
     [not found]                 ` <58cb370e0701200947p578f4d74g1fee511ded6c9a77@mail.gmail.com>
2007-01-20 18:21                   ` Bartlomiej Zolnierkiewicz
2007-01-20 18:41                     ` Sergei Shtylyov
2007-01-25 17:03                     ` Sergei Shtylyov
2007-01-19  0:32 ` [PATCH 9/15] sgiioc4: fix sgiioc4_ide_dma_check() to enable/disable DMA properly Bartlomiej Zolnierkiewicz
2007-01-19  0:32 ` [PATCH 10/15] ide: add ide_set_dma() helper Bartlomiej Zolnierkiewicz
2007-01-20 20:22   ` Sergei Shtylyov
2007-01-19  0:32 ` [PATCH 11/15] ide: make ide_hwif_t.ide_dma_{host_off,off_quietly} void Bartlomiej Zolnierkiewicz
2007-01-20 20:56   ` Sergei Shtylyov
     [not found]     ` <58cb370e0702021206h205ff983r88fb4bdbea42ed9f@mail.gmail.com>
2007-02-02 22:39       ` Bartlomiej Zolnierkiewicz
2007-01-19  0:32 ` [PATCH 12/15] ide: make ide_hwif_t.ide_dma_host_on void Bartlomiej Zolnierkiewicz
2007-01-20 20:46   ` Sergei Shtylyov
     [not found]     ` <58cb370e0702021128g15cac87ar507c20e78ded9464@mail.gmail.com>
2007-02-02 21:16       ` Bartlomiej Zolnierkiewicz
2007-03-26 17:19   ` Sergei Shtylyov
2007-04-20 20:36     ` Sergei Shtylyov
2007-01-19  0:32 ` [PATCH 13/15] ide: fix UDMA/MWDMA/SWDMA masks Bartlomiej Zolnierkiewicz
2007-01-22 16:19   ` Sergei Shtylyov
     [not found]     ` <58cb370e0702021606v4efa6143lf060e6aab9782c35@mail.gmail.com>
2007-02-03  0:39       ` Bartlomiej Zolnierkiewicz
2007-02-03 16:30         ` Sergei Shtylyov
2007-01-22 18:17   ` Sergei Shtylyov
2007-01-22 18:46     ` Alan
2007-01-22 20:28       ` Sergei Shtylyov
2007-01-22 21:31         ` Alan
2007-01-22 22:39           ` Jeff Garzik
2007-01-23 14:51           ` Sergei Shtylyov
2007-01-25 15:40             ` Sergei Shtylyov
2007-01-31 20:38       ` Sergei Shtylyov
2007-01-31 23:24         ` Alan
     [not found]     ` <58cb370e0702021606m4eb6f682xfa4bf769d398cf9@mail.gmail.com>
2007-02-03  0:50       ` Bartlomiej Zolnierkiewicz
2007-01-19  0:32 ` [PATCH 14/15] ide: rework the code for selecting the best DMA transfer mode Bartlomiej Zolnierkiewicz
2007-01-22 19:48   ` Sergei Shtylyov
     [not found]     ` <58cb370e0702021207o435f39cdsf3abb0d55829fc45@mail.gmail.com>
2007-02-02 23:57       ` Bartlomiej Zolnierkiewicz
2007-01-19  0:32 ` Bartlomiej Zolnierkiewicz [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20070119003240.14846.32464.sendpatchset@localhost.localdomain \
    --to=bzolnier@gmail.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --subject='Re: [PATCH 15/15] ide: add ide_tune_dma() helper' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).