LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* SATA exceptions triggered by XFS (since 2.6.18)
@ 2007-01-21 14:29 Paolo Ornati
  2007-01-21 16:40 ` Paolo Ornati
  0 siblings, 1 reply; 12+ messages in thread
From: Paolo Ornati @ 2007-01-21 14:29 UTC (permalink / raw)
  To: Linux Kernel Mailing List
  Cc: Robert Hancock, Björn Steinbrink, Jens Axboe, Jeff Garzik

Sorry for starting a new thread, but I've deleted the messages from my
mail-box, and I'm sot sure it's the same problem as here:
	http://lkml.org/lkml/2007/1/14/108

Today I've decided to try XFS... and just doing anything on it
(extracting a tarball, for example) make my SATA HD go crazy ;)

I don't remember to have seen this using Ext3.

[  877.839920] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x2 frozen
[  877.839929] ata1.00: cmd 61/02:00:64:98:98/00:00:00:00:00/40 tag 0 cdb 0x0 data 1024 out
[  877.839931]          res 40/00:00:00:4f:c2/00:00:00:4f:c2/00 Emask 0x4 (timeout)
[  878.142367] ata1: soft resetting port
[  878.351791] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  878.354384] ata1.00: configured for UDMA/133
[  878.354392] ata1: EH complete
[  878.355696] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[  878.355716] sda: Write Protect is off
[  878.355718] sda: Mode Sense: 00 3a 00 00
[  878.355745] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA


It takes nothing to reproduce it.

My hardware is:

00:00.0 Host bridge: Intel Corporation 82P965/G965 Memory Controller Hub (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82G965 Integrated Graphics Controller (rev 02)
00:03.0 Communication controller: Intel Corporation 82P965/G965 HECI Controller (rev 02)
00:19.0 Ethernet controller: Intel Corporation 82566DC Gigabit Network Connection (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801HB (ICH8) 4 port SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
02:00.0 IDE interface: Marvell Technology Group Ltd. Unknown device 6101 (rev b1)
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)


with a Seagate Barracurda 7200rpm 80GB HD


I've so far tested these kernels:
2.6.20-rc5	BAD
2.6.20-rc4	BAD
2.6.19		BAD
2.6.18		BAD
2.6.17		Good !

I'll start a git-bisection...

-- 
	Paolo Ornati
	Linux 2.6.20-rc5 on x86_64

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: SATA exceptions triggered by XFS (since 2.6.18)
  2007-01-21 14:29 SATA exceptions triggered by XFS (since 2.6.18) Paolo Ornati
@ 2007-01-21 16:40 ` Paolo Ornati
  2007-01-21 17:32   ` Robert Hancock
  0 siblings, 1 reply; 12+ messages in thread
From: Paolo Ornati @ 2007-01-21 16:40 UTC (permalink / raw)
  To: Paolo Ornati
  Cc: Linux Kernel Mailing List, Robert Hancock, Björn Steinbrink,
	Jens Axboe, Jeff Garzik, Tejun Heo

[-- Attachment #1: Type: text/plain, Size: 5742 bytes --]

On Sun, 21 Jan 2007 15:29:32 +0100
Paolo Ornati <ornati@fastwebnet.it> wrote:

> Sorry for starting a new thread, but I've deleted the messages from my
> mail-box, and I'm sot sure it's the same problem as here:
> 	http://lkml.org/lkml/2007/1/14/108
> 
> Today I've decided to try XFS... and just doing anything on it
> (extracting a tarball, for example) make my SATA HD go crazy ;)
> 
> I don't remember to have seen this using Ext3.
> 
> [  877.839920] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action
> 0x2 frozen [  877.839929] ata1.00: cmd
> 61/02:00:64:98:98/00:00:00:00:00/40 tag 0 cdb 0x0 data 1024 out
> [  877.839931]          res 40/00:00:00:4f:c2/00:00:00:4f:c2/00 Emask
> 0x4 (timeout) [  878.142367] ata1: soft resetting port [  878.351791]
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [  878.354384]
> ata1.00: configured for UDMA/133 [  878.354392] ata1: EH complete
> [  878.355696] SCSI device sda: 156301488 512-byte hdwr sectors
> (80026 MB) [  878.355716] sda: Write Protect is off
> [  878.355718] sda: Mode Sense: 00 3a 00 00
> [  878.355745] SCSI device sda: write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> 
> 
> It takes nothing to reproduce it.
> 
> My hardware is:
> 
> 00:00.0 Host bridge: Intel Corporation 82P965/G965 Memory Controller
> Hub (rev 02) 00:02.0 VGA compatible controller: Intel Corporation
> 82G965 Integrated Graphics Controller (rev 02) 00:03.0 Communication
> controller: Intel Corporation 82P965/G965 HECI Controller (rev 02)
> 00:19.0 Ethernet controller: Intel Corporation 82566DC Gigabit
> Network Connection (rev 02) 00:1a.0 USB Controller: Intel Corporation
> 82801H (ICH8 Family) USB UHCI #4 (rev 02) 00:1a.1 USB Controller:
> Intel Corporation 82801H (ICH8 Family) USB UHCI #5 (rev 02) 00:1a.7
> USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #2
> (rev 02) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family)
> HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation
> 82801H (ICH8 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge:
> Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02)
> 00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI
> Express Port 3 (rev 02) 00:1c.3 PCI bridge: Intel Corporation 82801H
> (ICH8 Family) PCI Express Port 4 (rev 02) 00:1c.4 PCI bridge: Intel
> Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02) 00:1d.0
> USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #1
> (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8
> Family) USB UHCI #2 (rev 02) 00:1d.2 USB Controller: Intel
> Corporation 82801H (ICH8 Family) USB UHCI #3 (rev 02) 00:1d.7 USB
> Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #1 (rev
> 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2)
> 00:1f.0 ISA bridge: Intel Corporation 82801HB/HR (ICH8/R) LPC
> Interface Controller (rev 02) 00:1f.2 SATA controller: Intel
> Corporation 82801HB (ICH8) 4 port SATA AHCI Controller (rev 02)
> 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus
> Controller (rev 02) 02:00.0 IDE interface: Marvell Technology Group
> Ltd. Unknown device 6101 (rev b1) 06:00.0 Ethernet controller:
> Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
> 
> 
> with a Seagate Barracurda 7200rpm 80GB HD
> 
> 
> I've so far tested these kernels:
> 2.6.20-rc5	BAD
> 2.6.20-rc4	BAD
> 2.6.19		BAD
> 2.6.18		BAD
> 2.6.17		Good !
> 
> I'll start a git-bisection...
> 

git-bisect points to this commit:

----------------------------------------------

12fad3f965830d71f6454f02b2af002a64cec4d3 is first bad commit
commit 12fad3f965830d71f6454f02b2af002a64cec4d3
Author: Tejun Heo <htejun@gmail.com>
Date:   Mon May 15 21:03:55 2006 +0900

[PATCH] ahci: implement NCQ suppport

Implement NCQ support.

Original implementation is from Jens Axboe.

Signed-off-by: Tejun Heo <htejun@gmail.com>

:040000 040000 be681c4b21f34da5241e72c97c6695d735e90771
3557b2db9d7c3d48a0408137b455ce12931bb18d M      drivers

----------------------------------------------

Problem just reproduced on 2.6.20-rc5:

[  431.374421] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x2 frozen
[  431.374430] ata1.00: cmd 61/40:00:fe:aa:98/00:00:00:00:00/40 tag 0 cdb 0x0 data 32768 out
[  431.374432]          res 40/00:00:9e:9c:bd/00:00:01:00:00/40 Emask 0x4 (timeout)
[  431.677154] ata1: soft resetting port
[  431.886700] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  431.889277] ata1.00: configured for UDMA/133
[  431.889285] ata1: EH complete
[  431.890781] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[  431.890854] sda: Write Protect is off
[  431.890858] sda: Mode Sense: 00 3a 00 00
[  431.890903] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  450.800490] XFS mounting filesystem sda1
[  450.853731] Ending clean XFS mount for filesystem: sda1
[  481.131888] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x2 frozen
[  481.131896] ata1.00: cmd 61/40:00:46:af:98/00:00:00:00:00/40 tag 0 cdb 0x0 data 32768 out
[  481.131898]          res 40/00:00:9e:9c:bd/00:00:01:00:00/40 Emask 0x4 (timeout)
[  481.436015] ata1: soft resetting port
[  481.645237] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  481.647825] ata1.00: configured for UDMA/133
[  481.647834] ata1: EH complete
[  481.649252] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[  481.649295] sda: Write Protect is off
[  481.649298] sda: Mode Sense: 00 3a 00 00
[  481.649358] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA


Full dmesg attached.

If you need more info, just ask.

-- 
	Paolo Ornati
	Linux 2.6.20-rc5 on x86_64

[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 27530 bytes --]

[    0.000000] Linux version 2.6.20-rc5 (paolo@tux) (gcc version 4.1.1 (Gentoo 4.1.1-r1)) #12 SMP Sun Jan 21 13:31:25 CET 2007
[    0.000000] Command line: root=/dev/sda6 vga=0x305
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
[    0.000000]  BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003e599000 (usable)
[    0.000000]  BIOS-e820: 000000003e599000 - 000000003e5a6000 (reserved)
[    0.000000]  BIOS-e820: 000000003e5a6000 - 000000003e655000 (usable)
[    0.000000]  BIOS-e820: 000000003e655000 - 000000003e6a6000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003e6a6000 - 000000003e6ab000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003e6ab000 - 000000003e6ac000 (usable)
[    0.000000]  BIOS-e820: 000000003e6ac000 - 000000003e6f2000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003e6f2000 - 000000003e6ff000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003e6ff000 - 000000003e700000 (usable)
[    0.000000]  BIOS-e820: 000000003e700000 - 000000003f000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] Entering add_active_range(0, 0, 143) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 255385) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 255398, 255573) 2 entries of 256 used
[    0.000000] Entering add_active_range(0, 255659, 255660) 3 entries of 256 used
[    0.000000] Entering add_active_range(0, 255743, 255744) 4 entries of 256 used
[    0.000000] end_pfn_map = 1048576
[    0.000000] DMI 2.4 present.
[    0.000000] ACPI: RSDP (v000 INTEL                                 ) @ 0x00000000000fe020
[    0.000000] ACPI: RSDT (v001 INTEL  DG965SS  0x00000629      0x01000013) @ 0x000000003e6fd038
[    0.000000] ACPI: FADT (v001 INTEL  DG965SS  0x00000629 MSFT 0x01000013) @ 0x000000003e6fc000
[    0.000000] ACPI: MADT (v001 INTEL  DG965SS  0x00000629 MSFT 0x01000013) @ 0x000000003e6f6000
[    0.000000] ACPI: WDDT (v001 INTEL  DG965SS  0x00000629 MSFT 0x01000013) @ 0x000000003e6f5000
[    0.000000] ACPI: MCFG (v001 INTEL  DG965SS  0x00000629 MSFT 0x01000013) @ 0x000000003e6f4000
[    0.000000] ACPI: ASF! (v032 INTEL  DG965SS  0x00000629 MSFT 0x01000013) @ 0x000000003e6f3000
[    0.000000] ACPI: HPET (v001 INTEL  DG965SS  0x00000629 MSFT 0x01000013) @ 0x000000003e6f2000
[    0.000000] ACPI: SSDT (v001 INTEL     CpuPm 0x00000629 MSFT 0x01000013) @ 0x000000003e6aa000
[    0.000000] ACPI: SSDT (v001 INTEL   Cpu0Ist 0x00000629 MSFT 0x01000013) @ 0x000000003e6a9000
[    0.000000] ACPI: SSDT (v001 INTEL   Cpu1Ist 0x00000629 MSFT 0x01000013) @ 0x000000003e6a8000
[    0.000000] ACPI: SSDT (v001 INTEL   Cpu2Ist 0x00000629 MSFT 0x01000013) @ 0x000000003e6a7000
[    0.000000] ACPI: SSDT (v001 INTEL   Cpu3Ist 0x00000629 MSFT 0x01000013) @ 0x000000003e6a6000
[    0.000000] ACPI: DSDT (v001 INTEL  DG965SS  0x00000629 MSFT 0x01000013) @ 0x0000000000000000
[    0.000000] Entering add_active_range(0, 0, 143) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 255385) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 255398, 255573) 2 entries of 256 used
[    0.000000] Entering add_active_range(0, 255659, 255660) 3 entries of 256 used
[    0.000000] Entering add_active_range(0, 255743, 255744) 4 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1048576
[    0.000000] early_node_map[5] active PFN ranges
[    0.000000]     0:        0 ->      143
[    0.000000]     0:      256 ->   255385
[    0.000000]     0:   255398 ->   255573
[    0.000000]     0:   255659 ->   255660
[    0.000000]     0:   255743 ->   255744
[    0.000000] On node 0 totalpages: 255449
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 1286 pages reserved
[    0.000000]   DMA zone: 2641 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 3440 pages used for memmap
[    0.000000]   DMA32 zone: 248026 pages, LIFO batch:31
[    0.000000]   Normal zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Processor #1
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Nosave address range: 000000000008f000 - 00000000000a0000
[    0.000000] Nosave address range: 00000000000a0000 - 00000000000e0000
[    0.000000] Nosave address range: 00000000000e0000 - 0000000000100000
[    0.000000] Nosave address range: 000000003e599000 - 000000003e5a6000
[    0.000000] Nosave address range: 000000003e655000 - 000000003e6a6000
[    0.000000] Nosave address range: 000000003e6a6000 - 000000003e6ab000
[    0.000000] Nosave address range: 000000003e6ac000 - 000000003e6f2000
[    0.000000] Nosave address range: 000000003e6f2000 - 000000003e6ff000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 3f000000:c0f00000)
[    0.000000] PERCPU: Allocating 32576 bytes of per cpu data
[    0.000000] Built 1 zonelists.  Total pages: 250667
[    0.000000] Kernel command line: root=/dev/sda6 vga=0x305
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[   30.622927] Console: colour dummy device 80x25
[   30.623426] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[   30.623788] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[   30.623872] Checking aperture...
[   30.633592] Memory: 998312k/1022976k available (2871k kernel code, 22812k reserved, 1529k data, 232k init)
[   30.693254] Calibrating delay using timer specific routine.. 3732.21 BogoMIPS (lpj=1866108)
[   30.693304] Mount-cache hash table entries: 256
[   30.693409] CPU: L1 I cache: 32K, L1 D cache: 32K
[   30.693414] CPU: L2 cache: 2048K
[   30.693417] using mwait in idle threads.
[   30.693421] CPU: Physical Processor ID: 0
[   30.693423] CPU: Processor Core ID: 0
[   30.693430] CPU0: Thermal monitoring enabled (TM2)
[   30.693444] Freeing SMP alternatives: 28k freed
[   30.693461] ACPI: Core revision 20060707
[   30.708480] Using local APIC timer interrupts.
[   30.762098] result 16650020
[   30.762101] Detected 16.650 MHz APIC timer.
[   30.762330] Booting processor 1/2 APIC 0x1
[   30.772913] Initializing CPU#1
[   30.833217] Calibrating delay using timer specific routine.. 3729.62 BogoMIPS (lpj=1864812)
[   30.833224] CPU: L1 I cache: 32K, L1 D cache: 32K
[   30.833226] CPU: L2 cache: 2048K
[   30.833229] CPU: Physical Processor ID: 0
[   30.833230] CPU: Processor Core ID: 1
[   30.833236] CPU1: Thermal monitoring enabled (TM2)
[   30.833533] Intel(R) Core(TM)2 CPU          6300  @ 1.86GHz stepping 06
[   30.834228] Brought up 2 CPUs
[   30.834277] testing NMI watchdog ... OK.
[   30.844290] time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
[   30.844294] time.c: Detected 1864.803 MHz processor.
[   30.898517] migration_cost=22
[   30.898779] NET: Registered protocol family 16
[   30.898854] ACPI: bus type pci registered
[   30.898861] PCI: Using configuration type 1
[   30.903472] ACPI: Interpreter enabled
[   30.903477] ACPI: Using IOAPIC for interrupt routing
[   30.903872] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   30.903878] PCI: Probing PCI hardware (bus 00)
[   30.903895] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[   30.905108] Boot video device is 0000:00:02.0
[   30.905728] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[   30.905734] PCI quirk: region 0500-053f claimed by ICH6 GPIO
[   30.906325] PCI: Transparent bridge - 0000:00:1e.0
[   30.906390] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   30.912015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[   30.912793] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[   30.913029] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[   30.913271] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[   30.913501] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[   30.913738] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12)
[   30.913969] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[   30.914204] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
[   30.914436] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[   30.916002] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[   30.916265] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[   30.916519] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[   30.916773] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[   30.917026] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[   30.918512] Linux Plug and Play Support v0.97 (c) Adam Belay
[   30.918521] pnp: PnP ACPI init
[   30.921536] pnp: PnP ACPI: found 13 devices
[   30.921672] SCSI subsystem initialized
[   30.921709] libata version 2.00 loaded.
[   30.921756] usbcore: registered new interface driver usbfs
[   30.921787] usbcore: registered new interface driver hub
[   30.921824] usbcore: registered new device driver usb
[   30.921886] PCI: Using ACPI for IRQ routing
[   30.921890] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   30.921974] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   30.921981] hpet0: 3 64-bit timers, 14318180 Hz
[   30.923000] PCI-GART: No AMD northbridge found.
[   30.923060] pnp: 00:06: ioport range 0x500-0x53f has been reserved
[   30.923065] pnp: 00:06: ioport range 0x400-0x47f could not be reserved
[   30.923069] pnp: 00:06: ioport range 0x680-0x6ff has been reserved
[   30.923339] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[   30.923345] PCI: Bridge: 0000:00:1c.0
[   30.923348]   IO window: disabled.
[   30.923353]   MEM window: 50400000-504fffff
[   30.923358]   PREFETCH window: disabled.
[   30.923363] PCI: Bridge: 0000:00:1c.1
[   30.923367]   IO window: 2000-2fff
[   30.923372]   MEM window: 50100000-501fffff
[   30.923376]   PREFETCH window: disabled.
[   30.923381] PCI: Bridge: 0000:00:1c.2
[   30.923384]   IO window: disabled.
[   30.923389]   MEM window: 50500000-505fffff
[   30.923393]   PREFETCH window: disabled.
[   30.923399] PCI: Bridge: 0000:00:1c.3
[   30.923401]   IO window: disabled.
[   30.923406]   MEM window: 50600000-506fffff
[   30.923411]   PREFETCH window: disabled.
[   30.923416] PCI: Bridge: 0000:00:1c.4
[   30.923418]   IO window: disabled.
[   30.923424]   MEM window: 50700000-507fffff
[   30.923428]   PREFETCH window: disabled.
[   30.923433] PCI: Bridge: 0000:00:1e.0
[   30.923437]   IO window: 1000-1fff
[   30.923442]   MEM window: 50000000-500fffff
[   30.923446]   PREFETCH window: disabled.
[   30.923467] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[   30.923475] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   30.923490] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[   30.923496] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   30.923511] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[   30.923518] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   30.923533] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[   30.923539] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[   30.923553] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
[   30.923560] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[   30.923569] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   30.923592] NET: Registered protocol family 2
[   30.936495] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[   30.936626] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[   30.937429] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   30.938075] TCP: Hash tables configured (established 131072 bind 65536)
[   30.938079] TCP reno registered
[   30.941694] checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
[   30.943818] Freeing initrd memory: 2000k freed
[   30.944858] IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
[   30.945458] fuse init (API version 7.8)
[   30.945511] SGI XFS with large block/inode numbers, no debug enabled
[   30.945676] io scheduler noop registered
[   30.945689] io scheduler cfq registered (default)
[   30.946204] vesafb: framebuffer at 0x40000000, mapped to 0xffffc20000080000, using 1536k, total 7616k
[   30.946210] vesafb: mode is 1024x768x8, linelength=1024, pages=8
[   30.946214] vesafb: scrolling: redraw
[   30.946217] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
[   30.954761] Console: switching to colour frame buffer device 128x48
[   30.963319] fb0: VESA VGA frame buffer device
[   30.963456] input: Power Button (FF) as /class/input/input0
[   30.963546] ACPI: Power Button (FF) [PWRF]
[   30.963660] input: Sleep Button (CM) as /class/input/input1
[   30.963753] ACPI: Sleep Button (CM) [SLPB]
[   30.964061] ACPI: Processor [CPU0] (supports 8 throttling states)
[   30.964230] ACPI: Processor [CPU1] (supports 8 throttling states)
[   30.966361] Real Time Clock Driver v1.12ac
[   30.966471] hpet_resources: 0xfed00000 is busy
[   30.966490] Linux agpgart interface v0.101 (c) Dave Jones
[   30.966636] agpgart: Detected an Intel 965G Chipset.
[   30.967245] agpgart: Unknown page table size, assuming 512KB
[   30.967343] agpgart: Detected 7676K stolen memory.
[   30.979835] agpgart: AGP aperture is 256M @ 0x40000000
[   30.979956] [drm] Initialized drm 1.1.0 20060810
[   30.980047] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[   30.980221] [drm] Initialized i915 1.6.0 20060119 on minor 0
[   30.980313] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[   30.980544] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   30.982444] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   30.984136] Floppy drive(s): fd0 is 1.44M
[   30.999821] FDC 0 is a National Semiconductor PC87306
[   31.002866] RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
[   31.004881] loop: loaded (max 8 devices)
[   31.006710] Intel(R) PRO/10GbE Network Driver - version 1.0.126-k2
[   31.008648] Copyright (c) 1999-2006 Intel Corporation.
[   31.010866] 8139too Fast Ethernet driver 0.9.28
[   31.012935] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 21 (level, low) -> IRQ 21
[   31.015439] eth0: RealTek RTL8139 at 0xffffc2000000e000, 00:e0:4c:f0:a9:84, IRQ 21
[   31.017719] eth0:  Identified 8139 chip type 'RTL-8139C'
[   31.017724] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   31.020080] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   31.022624] Probing IDE interface ide0...
[   31.536077] Probing IDE interface ide1...
[   32.049444] ahci 0000:00:1f.2: version 2.0
[   32.049457] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19
[   33.053438] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   33.053445] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[   33.056162] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part 
[   33.058971] ata1: SATA max UDMA/133 cmd 0xFFFFC20000024100 ctl 0x0 bmdma 0x0 irq 19
[   33.061879] ata2: SATA max UDMA/133 cmd 0xFFFFC20000024180 ctl 0x0 bmdma 0x0 irq 19
[   33.064763] ata3: DUMMY
[   33.067649] ata4: DUMMY
[   33.070574] ata5: SATA max UDMA/133 cmd 0xFFFFC20000024300 ctl 0x0 bmdma 0x0 irq 19
[   33.073666] ata6: SATA max UDMA/133 cmd 0xFFFFC20000024380 ctl 0x0 bmdma 0x0 irq 19
[   33.076718] scsi0 : ahci
[   33.537612] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   33.541952] ata1.00: ATA-6, max UDMA/133, 156301488 sectors: LBA48 NCQ (depth 31/32)
[   33.546612] ata1.00: configured for UDMA/133
[   33.549812] scsi1 : ahci
[   33.856779] ata2: SATA link down (SStatus 0 SControl 300)
[   33.859895] scsi2 : ahci
[   33.863049] scsi3 : ahci
[   33.866148] scsi4 : ahci
[   34.171860] ata5: SATA link down (SStatus 0 SControl 300)
[   34.174931] scsi5 : ahci
[   34.480952] ata6: SATA link down (SStatus 0 SControl 300)
[   34.484083] scsi 0:0:0:0: Direct-Access     ATA      ST380817AS       3.42 PQ: 0 ANSI: 5
[   34.487315] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[   34.490502] sda: Write Protect is off
[   34.493660] sda: Mode Sense: 00 3a 00 00
[   34.493675] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   34.497010] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[   34.500315] sda: Write Protect is off
[   34.503558] sda: Mode Sense: 00 3a 00 00
[   34.503573] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   34.506920]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[   34.570981] sd 0:0:0:0: Attached scsi disk sda
[   34.574292] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   34.577577] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[   34.580884] PCI: Setting latency timer of device 0000:02:00.0 to 64
[   34.580903] ata7: PATA max UDMA/100 cmd 0x2018 ctl 0x2026 bmdma 0x2000 irq 17
[   34.584160] scsi6 : pata_marvell
[   34.587447] BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00 
[   34.754096] ATA: abnormal status 0x8 on port 0x201F
[   34.769209] ATA: abnormal status 0x8 on port 0x201F
[   34.943029] ata7.01: ATAPI, max UDMA/33
[   35.117489] ata7.01: configured for UDMA/33
[   35.124371] scsi 6:0:1:0: CD-ROM            HL-DT-ST DVDRAM GSA-4167B DL11 PQ: 0 ANSI: 5
[   35.146129] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[   35.149422] Uniform CD-ROM driver Revision: 3.20
[   35.152680] sr 6:0:1:0: Attached scsi CD-ROM sr0
[   35.152733] sr 6:0:1:0: Attached scsi generic sg1 type 5
[   35.155964] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[   35.159175] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[   35.159179] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[   35.162397] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[   35.165598] ehci_hcd 0000:00:1a.7: debug port 1
[   35.168784] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[   35.168791] ehci_hcd 0000:00:1a.7: irq 18, io mem 0x50325c00
[   35.175808] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   35.179141] usb usb1: configuration #1 chosen from 1 choice
[   35.182385] hub 1-0:1.0: USB hub found
[   35.185625] hub 1-0:1.0: 4 ports detected
[   35.289849] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[   35.293120] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   35.293123] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   35.296363] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[   35.299612] ehci_hcd 0000:00:1d.7: debug port 1
[   35.302811] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[   35.302818] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x50325800
[   35.309902] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   35.313202] usb usb2: configuration #1 chosen from 1 choice
[   35.316505] hub 2-0:1.0: USB hub found
[   35.319802] hub 2-0:1.0: 6 ports detected
[   35.423852] USB Universal Host Controller Interface driver v3.0
[   35.427206] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[   35.430572] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[   35.430575] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[   35.433925] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[   35.437262] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030c0
[   35.440634] usb usb3: configuration #1 chosen from 1 choice
[   35.443886] hub 3-0:1.0: USB hub found
[   35.447056] hub 3-0:1.0: 2 ports detected
[   35.551901] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
[   35.555078] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[   35.555081] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[   35.558204] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[   35.561364] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000030a0
[   35.564605] usb usb4: configuration #1 chosen from 1 choice
[   35.567757] hub 4-0:1.0: USB hub found
[   35.570823] hub 4-0:1.0: 2 ports detected
[   35.674942] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[   35.677998] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   35.678001] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   35.680990] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[   35.684056] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080
[   35.687166] usb usb5: configuration #1 chosen from 1 choice
[   35.690247] hub 5-0:1.0: USB hub found
[   35.693235] hub 5-0:1.0: 2 ports detected
[   35.797979] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[   35.800971] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   35.800974] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   35.803973] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[   35.806959] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
[   35.809972] usb usb6: configuration #1 chosen from 1 choice
[   35.812916] hub 6-0:1.0: USB hub found
[   35.815806] hub 6-0:1.0: 2 ports detected
[   35.920021] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[   35.922994] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   35.922997] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   35.925960] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[   35.928932] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
[   35.931994] usb usb7: configuration #1 chosen from 1 choice
[   35.934965] hub 7-0:1.0: USB hub found
[   35.937844] hub 7-0:1.0: 2 ports detected
[   36.042093] usbcore: registered new interface driver cdc_acm
[   36.044991] drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
[   36.048065] usbcore: registered new interface driver usblp
[   36.051105] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[   36.054174] Initializing USB Mass Storage driver...
[   36.057250] usbcore: registered new interface driver usb-storage
[   36.060363] USB Mass Storage support registered.
[   36.063533] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[   36.069536] serio: i8042 KBD port at 0x60,0x64 irq 1
[   36.072646] serio: i8042 AUX port at 0x60,0x64 irq 12
[   36.075753] mice: PS/2 mouse device common for all mice
[   36.078970] i2c /dev entries driver
[   36.082061] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 21 (level, low) -> IRQ 21
[   36.105452] EDAC MC: Ver: 2.0.1 Jan 21 2007
[   36.108861] Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC).
[   36.112489] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[   36.115735] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   36.236274] ALSA device list:
[   36.239468]   #0: HDA Intel at 0x50320000 irq 22
[   36.242691] nf_conntrack version 0.5.0 (3996 buckets, 31968 max)
[   36.246129] ip_tables: (C) 2000-2006 Netfilter Core Team
[   36.292245] TCP cubic registered
[   36.295496] NET: Registered protocol family 1
[   36.298716] NET: Registered protocol family 17
[   36.301848] NET: Registered protocol family 15
[   36.817332] input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
[   36.844024] input: AT Translated Set 2 keyboard as /class/input/input3
[   36.911624] RAMDISK: ext2 filesystem found at block 0
[   36.914791] RAMDISK: Loading 2000KiB [1 disk] into ram disk... |\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\bdone.
[   36.922467] VFS: Mounted root (ext2 filesystem).
[   36.946396] kjournald starting.  Commit interval 5 seconds
[   36.946405] EXT3-fs: mounted filesystem with ordered data mode.
[   36.946440] VFS: Mounted root (ext3 filesystem) readonly.
[   36.946442] Trying to move old root to /initrd ... /initrd does not exist. Ignored.
[   36.946615] Unmounting old root
[   36.946720] Trying to free ramdisk memory ... okay
[   36.946984] Freeing unused kernel memory: 232k freed
[   41.104813] EXT3 FS on sda6, internal journal
[   41.550123] Adding 1004016k swap on /dev/sda7.  Priority:-1 extents:1 across:1004016k
[   62.630799] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  399.563221] XFS mounting filesystem sda1
[  399.603500] Ending clean XFS mount for filesystem: sda1
[  431.374421] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x2 frozen
[  431.374430] ata1.00: cmd 61/40:00:fe:aa:98/00:00:00:00:00/40 tag 0 cdb 0x0 data 32768 out
[  431.374432]          res 40/00:00:9e:9c:bd/00:00:01:00:00/40 Emask 0x4 (timeout)
[  431.677154] ata1: soft resetting port
[  431.886700] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  431.889277] ata1.00: configured for UDMA/133
[  431.889285] ata1: EH complete
[  431.890781] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[  431.890854] sda: Write Protect is off
[  431.890858] sda: Mode Sense: 00 3a 00 00
[  431.890903] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  450.800490] XFS mounting filesystem sda1
[  450.853731] Ending clean XFS mount for filesystem: sda1
[  481.131888] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x2 frozen
[  481.131896] ata1.00: cmd 61/40:00:46:af:98/00:00:00:00:00/40 tag 0 cdb 0x0 data 32768 out
[  481.131898]          res 40/00:00:9e:9c:bd/00:00:01:00:00/40 Emask 0x4 (timeout)
[  481.436015] ata1: soft resetting port
[  481.645237] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  481.647825] ata1.00: configured for UDMA/133
[  481.647834] ata1: EH complete
[  481.649252] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[  481.649295] sda: Write Protect is off
[  481.649298] sda: Mode Sense: 00 3a 00 00
[  481.649358] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[-- Attachment #3: interrupts.txt --]
[-- Type: text/plain, Size: 905 bytes --]

           CPU0       CPU1       
  0:     617966          0   IO-APIC-edge      timer
  1:       2361          0   IO-APIC-edge      i8042
  6:          5          0   IO-APIC-edge      floppy
  8:          1          0   IO-APIC-edge      rtc
  9:          0          0   IO-APIC-fasteoi   acpi
 12:      28043          0   IO-APIC-edge      i8042
 16:      43984          0   IO-APIC-fasteoi   uhci_hcd:usb3, i915@pci:0000:00:02.0
 17:       6551          0   IO-APIC-fasteoi   libata
 18:          0          0   IO-APIC-fasteoi   ehci_hcd:usb1, uhci_hcd:usb7
 19:       9176          0   IO-APIC-fasteoi   libata, uhci_hcd:usb6
 21:        375          0   IO-APIC-fasteoi   uhci_hcd:usb4, eth0
 22:        192          0   IO-APIC-fasteoi   HDA Intel
 23:          0          0   IO-APIC-fasteoi   ehci_hcd:usb2, uhci_hcd:usb5
NMI:        170         85 
LOC:     605529     605586 
ERR:          0

[-- Attachment #4: lspci.txt --]
[-- Type: text/plain, Size: 1982 bytes --]

00:00.0 Host bridge: Intel Corporation 82P965/G965 Memory Controller Hub (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82G965 Integrated Graphics Controller (rev 02)
00:03.0 Communication controller: Intel Corporation 82P965/G965 HECI Controller (rev 02)
00:19.0 Ethernet controller: Intel Corporation 82566DC Gigabit Network Connection (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801HB (ICH8) 4 port SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
02:00.0 IDE interface: Marvell Technology Group Ltd. Unknown device 6101 (rev b1)
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)

[-- Attachment #5: CONFIG --]
[-- Type: application/octet-stream, Size: 36697 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.20-rc5
# Sun Jan 21 13:29:59 2007
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_ZONE_DMA32=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_DMI=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
# CONFIG_CPUSETS is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y

#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VSMP is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_HT=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
CONFIG_SMP=y
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
# CONFIG_PREEMPT_BKL is not set
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_NR_CPUS=4
# CONFIG_HOTPLUG_CPU is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
# CONFIG_REORDER is not set
CONFIG_K8_NB=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
CONFIG_GENERIC_PENDING_IRQ=y

#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
# CONFIG_ACPI_HOTKEY is not set
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y

#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
CONFIG_NF_CONNTRACK_ENABLED=y
CONFIG_NF_CONNTRACK_SUPPORT=y
# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
CONFIG_NF_CONNTRACK=y
# CONFIG_NF_CT_ACCT is not set
# CONFIG_NF_CONNTRACK_MARK is not set
# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
# CONFIG_NF_CONNTRACK_FTP is not set
# CONFIG_NF_CONNTRACK_H323 is not set
# CONFIG_NF_CONNTRACK_IRC is not set
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SIP is not set
# CONFIG_NF_CONNTRACK_TFTP is not set
CONFIG_NETFILTER_XTABLES=y
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
CONFIG_NETFILTER_XT_MATCH_STATE=y
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set

#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=y
CONFIG_IP_NF_IPTABLES=y
# CONFIG_IP_NF_MATCH_IPRANGE is not set
# CONFIG_IP_NF_MATCH_TOS is not set
# CONFIG_IP_NF_MATCH_RECENT is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
CONFIG_IP_NF_MATCH_OWNER=y
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
CONFIG_IP_NF_FILTER=y
# CONFIG_IP_NF_TARGET_REJECT is not set
# CONFIG_IP_NF_TARGET_LOG is not set
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_TARGET_TCPMSS is not set
# CONFIG_NF_NAT is not set
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set

#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set

#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set

#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_PNPACPI=y

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_IDEDISK is not set
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set

#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set

#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
CONFIG_ATA=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
CONFIG_SATA_INTEL_COMBINED=y
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_MARVELL=y
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# PHY device support
#
# CONFIG_PHYLIB is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
CONFIG_SKGE=y
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
CONFIG_IXGB=y
# CONFIG_IXGB_NAPI is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_GEODE is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set

#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
# CONFIG_USB_DABUSB is not set

#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y

#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=y
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# HID Devices
#
# CONFIG_HID is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_MULTITHREAD_PROBE is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Input Devices
#
# CONFIG_USB_HID is not set

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set

#
# USB port drivers
#

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_TEST is not set

#
# USB DSL modem support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# LED devices
#
# CONFIG_NEW_LEDS is not set

#
# LED drivers
#

#
# LED Triggers
#

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
# CONFIG_EDAC_E752X is not set
CONFIG_EDAC_POLL=y

#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set

#
# DMA Engine support
#
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
CONFIG_NET_DMA=y

#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=y

#
# Virtualization
#
# CONFIG_KVM is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y

#
# Distributed Lock Manager
#
# CONFIG_DLM is not set

#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
# CONFIG_CRYPTO is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
CONFIG_IOMAP_COPY=y

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: SATA exceptions triggered by XFS (since 2.6.18)
  2007-01-21 16:40 ` Paolo Ornati
@ 2007-01-21 17:32   ` Robert Hancock
  2007-01-21 19:25     ` Paolo Ornati
  0 siblings, 1 reply; 12+ messages in thread
From: Robert Hancock @ 2007-01-21 17:32 UTC (permalink / raw)
  To: Paolo Ornati
  Cc: Linux Kernel Mailing List, Björn Steinbrink, Jens Axboe,
	Jeff Garzik, Tejun Heo

Paolo Ornati wrote:
> On Sun, 21 Jan 2007 15:29:32 +0100
> Paolo Ornati <ornati@fastwebnet.it> wrote:
> 
>> Sorry for starting a new thread, but I've deleted the messages from my
>> mail-box, and I'm sot sure it's the same problem as here:
>> 	http://lkml.org/lkml/2007/1/14/108
>>
>> Today I've decided to try XFS... and just doing anything on it
>> (extracting a tarball, for example) make my SATA HD go crazy ;)
>>
>> I don't remember to have seen this using Ext3.
>>
>> [  877.839920] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action
>> 0x2 frozen [  877.839929] ata1.00: cmd
>> 61/02:00:64:98:98/00:00:00:00:00/40 tag 0 cdb 0x0 data 1024 out
>> [  877.839931]          res 40/00:00:00:4f:c2/00:00:00:4f:c2/00 Emask
>> 0x4 (timeout) [  878.142367] ata1: soft resetting port [  878.351791]
>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [  878.354384]
>> ata1.00: configured for UDMA/133 [  878.354392] ata1: EH complete
>> [  878.355696] SCSI device sda: 156301488 512-byte hdwr sectors
>> (80026 MB) [  878.355716] sda: Write Protect is off
>> [  878.355718] sda: Mode Sense: 00 3a 00 00
>> [  878.355745] SCSI device sda: write cache: enabled, read cache:
>> enabled, doesn't support DPO or FUA
>>
>>
>> It takes nothing to reproduce it.
..

> git-bisect points to this commit:
> 
> ----------------------------------------------
> 
> 12fad3f965830d71f6454f02b2af002a64cec4d3 is first bad commit
> commit 12fad3f965830d71f6454f02b2af002a64cec4d3
> Author: Tejun Heo <htejun@gmail.com>
> Date:   Mon May 15 21:03:55 2006 +0900
> 
> [PATCH] ahci: implement NCQ suppport
> 
> Implement NCQ support.

It looks like what you're getting is an actual NCQ write timing out. 
That makes the bisect result not very interesting since obviously it 
wouldn't have issued any NCQ writes before NCQ support was implemented. 
Seeing as how it's also an entirely different driver I imagine it's a 
different problem than what I've been looking at.

Maybe that drive just has some issues with NCQ? I would be surprised at 
that with a Seagate though..

-- 
Robert Hancock      Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@nospamshaw.ca
Home Page: http://www.roberthancock.com/


^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: SATA exceptions triggered by XFS (since 2.6.18)
  2007-01-21 17:32   ` Robert Hancock
@ 2007-01-21 19:25     ` Paolo Ornati
  2007-01-21 20:32       ` Chr
  2007-01-22  2:46       ` Tejun Heo
  0 siblings, 2 replies; 12+ messages in thread
From: Paolo Ornati @ 2007-01-21 19:25 UTC (permalink / raw)
  To: Robert Hancock
  Cc: Linux Kernel Mailing List, Björn Steinbrink, Jens Axboe,
	Jeff Garzik, Tejun Heo

On Sun, 21 Jan 2007 11:32:02 -0600
Robert Hancock <hancockr@shaw.ca> wrote:

> It looks like what you're getting is an actual NCQ write timing out. 
> That makes the bisect result not very interesting since obviously it 
> wouldn't have issued any NCQ writes before NCQ support was
> implemented. Seeing as how it's also an entirely different driver I
> imagine it's a different problem than what I've been looking at.
> 
> Maybe that drive just has some issues with NCQ? I would be surprised
> at that with a Seagate though..

I don't know. It's a two years old ST380817AS.


# smartctl -a -d ata /dev/sda

smartctl version 5.36 [x86_64-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.7 and 7200.7 Plus family
Device Model:     ST380817AS
Serial Number:    4MR08EK8
Firmware Version: 3.42
User Capacity:    80,026,361,856 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   6
ATA Standard is:  ATA/ATAPI-6 T13 1410D revision 2
Local Time is:    Sun Jan 21 20:15:40 2007 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		 ( 430) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					No General Purpose Logging support.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  47) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   059   049   006    Pre-fail  Always       -       215927244
  3 Spin_Up_Time            0x0003   098   098   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   098   098   020    Old_age   Always       -       2182
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   083   060   030    Pre-fail  Always       -       204305750
  9 Power_On_Hours          0x0032   097   097   000    Old_age   Always       -       3494
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   098   098   020    Old_age   Always       -       2541
194 Temperature_Celsius     0x0022   024   040   000    Old_age   Always       -       24 (Lifetime Min/Max 0/15)
195 Hardware_ECC_Recovered  0x001a   059   049   000    Old_age   Always       -       215927244
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       1
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       1
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0
202 TA_Increase_Count       0x0032   100   253   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 12 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 12 occurred at disk power-on lifetime: 2516 hours (104 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 0d 5b 9d 34 e1  Error: UNC 13 sectors at LBA = 0x01349d5b = 20225371

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 00 4e 9d 34 e1 00      00:03:03.851  READ DMA
  c8 00 00 4e 9d 34 e1 00      00:03:03.848  READ DMA
  c8 00 00 4e 9d 34 e1 00      00:03:03.846  READ DMA
  c8 00 00 4e 9d 34 e1 00      00:03:03.843  READ DMA
  c8 00 00 4e 9d 34 e1 00      00:03:03.839  READ DMA

Error 11 occurred at disk power-on lifetime: 2516 hours (104 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 0d 5b 9d 34 e1  Error: UNC 13 sectors at LBA = 0x01349d5b = 20225371

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 00 4e 9d 34 e1 00      00:03:03.851  READ DMA
  c8 00 00 4e 9d 34 e1 00      00:03:03.848  READ DMA
  c8 00 00 4e 9d 34 e1 00      00:03:03.846  READ DMA
  c8 00 00 4e 9d 34 e1 00      00:03:03.843  READ DMA
  c8 00 00 4e 9d 34 e1 00      00:03:03.839  READ DMA

Error 10 occurred at disk power-on lifetime: 2516 hours (104 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 0d 5b 9d 34 e1  Error: UNC 13 sectors at LBA = 0x01349d5b = 20225371

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 00 4e 9d 34 e1 00      00:03:03.851  READ DMA
  c8 00 00 4e 9d 34 e1 00      00:03:03.848  READ DMA
  c8 00 00 4e 9d 34 e1 00      00:03:03.846  READ DMA
  c8 00 00 4e 9d 34 e1 00      00:03:03.843  READ DMA
  c8 00 00 16 9c 34 e1 00      00:03:03.839  READ DMA

Error 9 occurred at disk power-on lifetime: 2516 hours (104 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 0d 5b 9d 34 e1  Error: UNC 13 sectors at LBA = 0x01349d5b = 20225371

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 00 4e 9d 34 e1 00      00:03:03.851  READ DMA
  c8 00 00 4e 9d 34 e1 00      00:03:03.848  READ DMA
  c8 00 00 4e 9d 34 e1 00      00:03:03.846  READ DMA
  c8 00 00 16 9c 34 e1 00      00:03:03.843  READ DMA
  c8 00 00 0e 9b 34 e1 00      00:03:03.839  READ DMA

Error 8 occurred at disk power-on lifetime: 2516 hours (104 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 0d 5b 9d 34 e1  Error: UNC 13 sectors at LBA = 0x01349d5b = 20225371

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 00 4e 9d 34 e1 00      00:03:03.851  READ DMA
  c8 00 00 4e 9d 34 e1 00      00:03:03.848  READ DMA
  c8 00 00 16 9c 34 e1 00      00:03:03.846  READ DMA
  c8 00 00 0e 9b 34 e1 00      00:03:03.843  READ DMA
  c8 00 00 8e 99 34 e1 00      00:03:03.839  READ DMA

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.



-- 
	Paolo Ornati
	Linux 2.6.20-rc5 on x86_64

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: SATA exceptions triggered by XFS (since 2.6.18)
  2007-01-21 19:25     ` Paolo Ornati
@ 2007-01-21 20:32       ` Chr
  2007-01-22  0:54         ` Jiri Slaby
  2007-01-22  2:46       ` Tejun Heo
  1 sibling, 1 reply; 12+ messages in thread
From: Chr @ 2007-01-21 20:32 UTC (permalink / raw)
  To: Paolo Ornati
  Cc: Robert Hancock, Linux Kernel Mailing List, Björn Steinbrink,
	Jens Axboe, Jeff Garzik, Tejun Heo, chunkeey

On Sunday, 21. January 2007 20:25, Paolo Ornati wrote:
> On Sun, 21 Jan 2007 11:32:02 -0600
> Robert Hancock <hancockr@shaw.ca> wrote:
> 
> > It looks like what you're getting is an actual NCQ write timing out. 
> > That makes the bisect result not very interesting since obviously it 
> > wouldn't have issued any NCQ writes before NCQ support was
> > implemented. Seeing as how it's also an entirely different driver I
> > imagine it's a different problem than what I've been looking at.
> > 
> > Maybe that drive just has some issues with NCQ? I would be surprised
> > at that with a Seagate though..
> 
> I don't know. It's a two years old ST380817AS.
> 
> 
> # smartctl -a -d ata /dev/sda
> 
> smartctl version 5.36 [x86_64-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
> Home page is http://smartmontools.sourceforge.net/
> 
> === START OF INFORMATION SECTION ===
> Model Family:     Seagate Barracuda 7200.7 and 7200.7 Plus family
> Device Model:     ST380817AS
> Serial Number:    4MR08EK8
> Firmware Version: 3.42
> User Capacity:    80,026,361,856 bytes
> Device is:        In smartctl database [for details use: -P show]
> ATA Version is:   6
> ATA Standard is:  ATA/ATAPI-6 T13 1410D revision 2
> Local Time is:    Sun Jan 21 20:15:40 2007 CET
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
> 
> === START OF READ SMART DATA SECTION ===
> SMART overall-health self-assessment test result: PASSED
> 
> General SMART Values:
> Offline data collection status:  (0x82)	Offline data collection activity
> 					was completed without error.
> 					Auto Offline Data Collection: Enabled.
> Self-test execution status:      (   0)	The previous self-test routine completed
> 					without error or no self-test has ever 
> 					been run.
> Total time to complete Offline 
> data collection: 		 ( 430) seconds.
> Offline data collection
> capabilities: 			 (0x5b) SMART execute Offline immediate.
> 					Auto Offline data collection on/off support.
> 					Suspend Offline collection upon new
> 					command.
> 					Offline surface scan supported.
> 					Self-test supported.
> 					No Conveyance Self-test supported.
> 					Selective Self-test supported.
> SMART capabilities:            (0x0003)	Saves SMART data before entering
> 					power-saving mode.
> 					Supports SMART auto save timer.
> Error logging capability:        (0x01)	Error logging supported.
> 					No General Purpose Logging support.
> Short self-test routine 
> recommended polling time: 	 (   1) minutes.
> Extended self-test routine
> recommended polling time: 	 (  47) minutes.
> 
> SMART Attributes Data Structure revision number: 10
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
>   1 Raw_Read_Error_Rate     0x000f   059   049   006    Pre-fail  Always       -       215927244
>   3 Spin_Up_Time            0x0003   098   098   000    Pre-fail  Always       -       0
>   4 Start_Stop_Count        0x0032   098   098   020    Old_age   Always       -       2182
>   5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
>   7 Seek_Error_Rate         0x000f   083   060   030    Pre-fail  Always       -       204305750
>   9 Power_On_Hours          0x0032   097   097   000    Old_age   Always       -       3494
>  10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
>  12 Power_Cycle_Count       0x0032   098   098   020    Old_age   Always       -       2541
> 194 Temperature_Celsius     0x0022   024   040   000    Old_age   Always       -       24 (Lifetime Min/Max 0/15)
> 195 Hardware_ECC_Recovered  0x001a   059   049   000    Old_age   Always       -       215927244
> 197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       1
> 198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       1
> 199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
> 200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0
> 202 TA_Increase_Count       0x0032   100   253   000    Old_age   Always       -       0
> 
> SMART Error Log Version: 1
> ATA Error Count: 12 (device log contains only the most recent five errors)
> 	CR = Command Register [HEX]
> 	FR = Features Register [HEX]
> 	SC = Sector Count Register [HEX]
> 	SN = Sector Number Register [HEX]
> 	CL = Cylinder Low Register [HEX]
> 	CH = Cylinder High Register [HEX]
> 	DH = Device/Head Register [HEX]
> 	DC = Device Command Register [HEX]
> 	ER = Error register [HEX]
> 	ST = Status register [HEX]
> Powered_Up_Time is measured from power on, and printed as
> DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
> SS=sec, and sss=millisec. It "wraps" after 49.710 days.
> 
> Error 12 occurred at disk power-on lifetime: 2516 hours (104 days + 20 hours)
>   When the command that caused the error occurred, the device was active or idle.
> 
>   After command completion occurred, registers were:
>   ER ST SC SN CL CH DH
>   -- -- -- -- -- -- --
>   40 51 0d 5b 9d 34 e1  Error: UNC 13 sectors at LBA = 0x01349d5b = 20225371
> 
>   Commands leading to the command that caused the error were:
>   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
>   -- -- -- -- -- -- -- --  ----------------  --------------------
>   c8 00 00 4e 9d 34 e1 00      00:03:03.851  READ DMA
>   c8 00 00 4e 9d 34 e1 00      00:03:03.848  READ DMA
>   c8 00 00 4e 9d 34 e1 00      00:03:03.846  READ DMA
>   c8 00 00 4e 9d 34 e1 00      00:03:03.843  READ DMA
>   c8 00 00 4e 9d 34 e1 00      00:03:03.839  READ DMA
> 
> Error 11 occurred at disk power-on lifetime: 2516 hours (104 days + 20 hours)
>   When the command that caused the error occurred, the device was active or idle.
> 
>   After command completion occurred, registers were:
>   ER ST SC SN CL CH DH
>   -- -- -- -- -- -- --
>   40 51 0d 5b 9d 34 e1  Error: UNC 13 sectors at LBA = 0x01349d5b = 20225371
> 
>   Commands leading to the command that caused the error were:
>   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
>   -- -- -- -- -- -- -- --  ----------------  --------------------
>   c8 00 00 4e 9d 34 e1 00      00:03:03.851  READ DMA
>   c8 00 00 4e 9d 34 e1 00      00:03:03.848  READ DMA
>   c8 00 00 4e 9d 34 e1 00      00:03:03.846  READ DMA
>   c8 00 00 4e 9d 34 e1 00      00:03:03.843  READ DMA
>   c8 00 00 4e 9d 34 e1 00      00:03:03.839  READ DMA
> 
> Error 10 occurred at disk power-on lifetime: 2516 hours (104 days + 20 hours)
>   When the command that caused the error occurred, the device was active or idle.
> 
>   After command completion occurred, registers were:
>   ER ST SC SN CL CH DH
>   -- -- -- -- -- -- --
>   40 51 0d 5b 9d 34 e1  Error: UNC 13 sectors at LBA = 0x01349d5b = 20225371
> 
>   Commands leading to the command that caused the error were:
>   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
>   -- -- -- -- -- -- -- --  ----------------  --------------------
>   c8 00 00 4e 9d 34 e1 00      00:03:03.851  READ DMA
>   c8 00 00 4e 9d 34 e1 00      00:03:03.848  READ DMA
>   c8 00 00 4e 9d 34 e1 00      00:03:03.846  READ DMA
>   c8 00 00 4e 9d 34 e1 00      00:03:03.843  READ DMA
>   c8 00 00 16 9c 34 e1 00      00:03:03.839  READ DMA
> 
> Error 9 occurred at disk power-on lifetime: 2516 hours (104 days + 20 hours)
>   When the command that caused the error occurred, the device was active or idle.
> 
>   After command completion occurred, registers were:
>   ER ST SC SN CL CH DH
>   -- -- -- -- -- -- --
>   40 51 0d 5b 9d 34 e1  Error: UNC 13 sectors at LBA = 0x01349d5b = 20225371
> 
>   Commands leading to the command that caused the error were:
>   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
>   -- -- -- -- -- -- -- --  ----------------  --------------------
>   c8 00 00 4e 9d 34 e1 00      00:03:03.851  READ DMA
>   c8 00 00 4e 9d 34 e1 00      00:03:03.848  READ DMA
>   c8 00 00 4e 9d 34 e1 00      00:03:03.846  READ DMA
>   c8 00 00 16 9c 34 e1 00      00:03:03.843  READ DMA
>   c8 00 00 0e 9b 34 e1 00      00:03:03.839  READ DMA
> 
> Error 8 occurred at disk power-on lifetime: 2516 hours (104 days + 20 hours)
>   When the command that caused the error occurred, the device was active or idle.
> 
>   After command completion occurred, registers were:
>   ER ST SC SN CL CH DH
>   -- -- -- -- -- -- --
>   40 51 0d 5b 9d 34 e1  Error: UNC 13 sectors at LBA = 0x01349d5b = 20225371
> 
>   Commands leading to the command that caused the error were:
>   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
>   -- -- -- -- -- -- -- --  ----------------  --------------------
>   c8 00 00 4e 9d 34 e1 00      00:03:03.851  READ DMA
>   c8 00 00 4e 9d 34 e1 00      00:03:03.848  READ DMA
>   c8 00 00 16 9c 34 e1 00      00:03:03.846  READ DMA
>   c8 00 00 0e 9b 34 e1 00      00:03:03.843  READ DMA
>   c8 00 00 8e 99 34 e1 00      00:03:03.839  READ DMA
> 
> SMART Self-test log structure revision number 1
> No self-tests have been logged.  [To run self-tests, use: smartctl -t]
> 
> 
> SMART Selective self-test log data structure revision number 1
>  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
>     1        0        0  Not_testing
>     2        0        0  Not_testing
>     3        0        0  Not_testing
>     4        0        0  Not_testing
>     5        0        0  Not_testing
> Selective self-test flags (0x0):
>   After scanning selected spans, do NOT read-scan remainder of disk.
> If Selective self-test is pending on power-up, resume after 0 minute delay.
> 
(Added myself to CC.) 

>   7 Seek_Error_Rate         0x000f   083   060   030    Pre-fail  Always       -       204305750
>   1 Raw_Read_Error_Rate     0x000f   059   049   006    Pre-fail  Always       -       215927244
> 195 Hardware_ECC_Recovered  0x001a   059   049   000    Old_age   Always       -       215927244 

Wow! that HDD is really in a bad condition.

Thanks,
	Chr.

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: SATA exceptions triggered by XFS (since 2.6.18)
  2007-01-21 20:32       ` Chr
@ 2007-01-22  0:54         ` Jiri Slaby
  2007-01-22  8:16           ` Paolo Ornati
  0 siblings, 1 reply; 12+ messages in thread
From: Jiri Slaby @ 2007-01-22  0:54 UTC (permalink / raw)
  To: Chr
  Cc: Paolo Ornati, Robert Hancock, Linux Kernel Mailing List,
	Björn Steinbrink, Jens Axboe, Jeff Garzik, Tejun Heo

Chr wrote:
>>   7 Seek_Error_Rate         0x000f   083   060   030    Pre-fail  Always       -       204305750
>>   1 Raw_Read_Error_Rate     0x000f   059   049   006    Pre-fail  Always       -       215927244
>> 195 Hardware_ECC_Recovered  0x001a   059   049   000    Old_age   Always       -       215927244 
> 
> Wow! that HDD is really in a bad condition.

I don't think so, this seems to be normal for Seagate drives...

regards,
-- 
http://www.fi.muni.cz/~xslaby/            Jiri Slaby
faculty of informatics, masaryk university, brno, cz
e-mail: jirislaby gmail com, gpg pubkey fingerprint:
B674 9967 0407 CE62 ACC8  22A0 32CC 55C3 39D4 7A7E

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: SATA exceptions triggered by XFS (since 2.6.18)
  2007-01-21 19:25     ` Paolo Ornati
  2007-01-21 20:32       ` Chr
@ 2007-01-22  2:46       ` Tejun Heo
  2007-01-22  8:38         ` Paolo Ornati
  1 sibling, 1 reply; 12+ messages in thread
From: Tejun Heo @ 2007-01-22  2:46 UTC (permalink / raw)
  To: Paolo Ornati
  Cc: Robert Hancock, Linux Kernel Mailing List, Björn Steinbrink,
	Jens Axboe, Jeff Garzik

Paolo Ornati wrote:
> I don't know. It's a two years old ST380817AS.
> 
> # smartctl -a -d ata /dev/sda
> 
> smartctl version 5.36 [x86_64-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
> Home page is http://smartmontools.sourceforge.net/
> 
> === START OF INFORMATION SECTION ===
> Model Family:     Seagate Barracuda 7200.7 and 7200.7 Plus family
> Device Model:     ST380817AS

I'll blacklist it.  Thanks.

-- 
tejun

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: SATA exceptions triggered by XFS (since 2.6.18)
  2007-01-22  0:54         ` Jiri Slaby
@ 2007-01-22  8:16           ` Paolo Ornati
  0 siblings, 0 replies; 12+ messages in thread
From: Paolo Ornati @ 2007-01-22  8:16 UTC (permalink / raw)
  To: Jiri Slaby
  Cc: Chr, Robert Hancock, Linux Kernel Mailing List,
	Björn Steinbrink, Jens Axboe, Jeff Garzik, Tejun Heo

On Mon, 22 Jan 2007 01:53:21 +0059
Jiri Slaby <jirislaby@gmail.com> wrote:

> >>   7 Seek_Error_Rate         0x000f   083   060   030    Pre-fail  Always       -       204305750
> >>   1 Raw_Read_Error_Rate     0x000f   059   049   006    Pre-fail  Always       -       215927244
> >> 195 Hardware_ECC_Recovered  0x001a   059   049   000    Old_age   Always       -       215927244 
> > 
> > Wow! that HDD is really in a bad condition.
> 
> I don't think so, this seems to be normal for Seagate drives...

I agree.

For Chr: I don't think these big raw-numbers are counters, look at the
normalized values instead, and see that they are greater than TRESH
values (so they are good).

The meaning of raw-numbers is vendor specific.

-- 
	Paolo Ornati
	Linux 2.6.20-rc5 on x86_64

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: SATA exceptions triggered by XFS (since 2.6.18)
  2007-01-22  2:46       ` Tejun Heo
@ 2007-01-22  8:38         ` Paolo Ornati
  2007-01-22  9:35           ` Tejun Heo
  0 siblings, 1 reply; 12+ messages in thread
From: Paolo Ornati @ 2007-01-22  8:38 UTC (permalink / raw)
  To: Tejun Heo
  Cc: Robert Hancock, Linux Kernel Mailing List, Björn Steinbrink,
	Jens Axboe, Jeff Garzik

On Mon, 22 Jan 2007 11:46:01 +0900
Tejun Heo <htejun@gmail.com> wrote:

> > I don't know. It's a two years old ST380817AS.
> > 
> > # smartctl -a -d ata /dev/sda
> > 
> > smartctl version 5.36 [x86_64-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
> > Home page is http://smartmontools.sourceforge.net/
> > 
> > === START OF INFORMATION SECTION ===
> > Model Family:     Seagate Barracuda 7200.7 and 7200.7 Plus family
> > Device Model:     ST380817AS
> 
> I'll blacklist it.  Thanks.

Ok. It will be better if someone else with the same HD could confirm.

It looks so strange that an HD that works fine, and should support NCQ,
have so big troubles that I can "freeze" it in less than a second by
using XFS (while with ext3 I cannot, or at least it's very hard).

-- 
	Paolo Ornati
	Linux 2.6.20-rc5 on x86_64

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: SATA exceptions triggered by XFS (since 2.6.18)
  2007-01-22  8:38         ` Paolo Ornati
@ 2007-01-22  9:35           ` Tejun Heo
  2007-01-22 10:02             ` Paolo Ornati
  2007-01-22 10:21             ` Paolo Ornati
  0 siblings, 2 replies; 12+ messages in thread
From: Tejun Heo @ 2007-01-22  9:35 UTC (permalink / raw)
  To: Paolo Ornati
  Cc: Robert Hancock, Linux Kernel Mailing List, Björn Steinbrink,
	Jens Axboe, Jeff Garzik

Paolo Ornati wrote:
>>> === START OF INFORMATION SECTION ===
>>> Model Family:     Seagate Barracuda 7200.7 and 7200.7 Plus family
>>> Device Model:     ST380817AS
>> I'll blacklist it.  Thanks.
> 
> Ok. It will be better if someone else with the same HD could confirm.
> 
> It looks so strange that an HD that works fine, and should support NCQ,
> have so big troubles that I can "freeze" it in less than a second by
> using XFS (while with ext3 I cannot, or at least it's very hard).

Yeap, certainly.  I'll ask people first before actually proceeding with 
the blacklisting.  I'm just getting a bit tired of tides of NCQ firmware 
problems.

Anyways, for the time being, you can easily turn off NCQ using sysfs. 
Please take a look at http://linux-ata.org/faq.html

-- 
tejun

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: SATA exceptions triggered by XFS (since 2.6.18)
  2007-01-22  9:35           ` Tejun Heo
@ 2007-01-22 10:02             ` Paolo Ornati
  2007-01-22 10:21             ` Paolo Ornati
  1 sibling, 0 replies; 12+ messages in thread
From: Paolo Ornati @ 2007-01-22 10:02 UTC (permalink / raw)
  To: Tejun Heo
  Cc: Robert Hancock, Linux Kernel Mailing List, Björn Steinbrink,
	Jens Axboe, Jeff Garzik

On Mon, 22 Jan 2007 18:35:05 +0900
Tejun Heo <htejun@gmail.com> wrote:

> Yeap, certainly.  I'll ask people first before actually proceeding with 
> the blacklisting.  I'm just getting a bit tired of tides of NCQ firmware 
> problems.
> 
> Anyways, for the time being, you can easily turn off NCQ using sysfs. 
> Please take a look at http://linux-ata.org/faq.html

ok

-- 
	Paolo Ornati
	Linux 2.6.20-rc5 on x86_64

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: SATA exceptions triggered by XFS (since 2.6.18)
  2007-01-22  9:35           ` Tejun Heo
  2007-01-22 10:02             ` Paolo Ornati
@ 2007-01-22 10:21             ` Paolo Ornati
  1 sibling, 0 replies; 12+ messages in thread
From: Paolo Ornati @ 2007-01-22 10:21 UTC (permalink / raw)
  To: Tejun Heo
  Cc: Robert Hancock, Linux Kernel Mailing List, Björn Steinbrink,
	Jens Axboe, Jeff Garzik

On Mon, 22 Jan 2007 18:35:05 +0900
Tejun Heo <htejun@gmail.com> wrote:

> Yeap, certainly.  I'll ask people first before actually proceeding with 
> the blacklisting.  I'm just getting a bit tired of tides of NCQ firmware 
> problems.

Another interesting thing: it seems that I'm unable to reproduce the
problem mounting XFS with "nobarrier" (using sda queue_depth = 31).

So it looks like a problem with NCQ combined with cache flush command...

-- 
	Paolo Ornati
	Linux 2.6.20-rc5 on x86_64

^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, other threads:[~2007-01-22 10:21 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-01-21 14:29 SATA exceptions triggered by XFS (since 2.6.18) Paolo Ornati
2007-01-21 16:40 ` Paolo Ornati
2007-01-21 17:32   ` Robert Hancock
2007-01-21 19:25     ` Paolo Ornati
2007-01-21 20:32       ` Chr
2007-01-22  0:54         ` Jiri Slaby
2007-01-22  8:16           ` Paolo Ornati
2007-01-22  2:46       ` Tejun Heo
2007-01-22  8:38         ` Paolo Ornati
2007-01-22  9:35           ` Tejun Heo
2007-01-22 10:02             ` Paolo Ornati
2007-01-22 10:21             ` Paolo Ornati

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).