LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Pavel Pisa <pisa@cmp.felk.cvut.cz>
To: tglx@linutronix.de
Cc: Ingo Molnar <mingo@elte.hu>,
	linux-kernel@vger.kernel.org,
	Sascha Hauer <s.hauer@pengutronix.de>
Subject: Re: [PATCH updated] arm: i.MX/MX1 clock event source
Date: Fri, 26 Jan 2007 20:34:02 +0100	[thread overview]
Message-ID: <200701262034.03554.pisa@cmp.felk.cvut.cz> (raw)
In-Reply-To: <1169638626.21181.170.camel@localhost.localdomain>

On Wednesday 24 January 2007 12:37, Thomas Gleixner wrote:
> On Wed, 2007-01-24 at 03:00 +0100, Pavel Pisa wrote:
> > stays NULL after clock event registration. Interrupts
> > runs, but my code doesnot call any function. The notification
> > chain and clock events list seems to be filled correctly.
> > I have added
> >
> >         clockevent_imx.cpumask = cpumask_of_cpu(0);
>
> Correct. I probably should disable the check for UP.

I have made mistake last time on 2.6.20-rc5-rt8.
I have returned to testing today with 2.6.20-rc6-rt2.
I have added checking outputs to the tickregistration
routines, but all works correctly after right cpumask correction.
I have rechecked even without additional printks
and I have observed no problems. The clock events enabled kernels
requires next minor changes to compile on ARM still

================================================================================
================================================================================

 arch/arm/kernel/process.c |    5 +++--
 kernel/time/tick-sched.c  |    1 +
 2 files changed, 4 insertions(+), 2 deletions(-)

Index: linux-2.6.20-rc6/kernel/time/tick-sched.c
===================================================================
--- linux-2.6.20-rc6.orig/kernel/time/tick-sched.c
+++ linux-2.6.20-rc6/kernel/time/tick-sched.c
@@ -20,6 +20,7 @@
 #include <linux/profile.h>
 #include <linux/sched.h>
 #include <linux/tick.h>
+#include <asm/irq_regs.h>
 
 #include "tick-internal.h"
 
Index: linux-2.6.20-rc6/arch/arm/kernel/process.c
===================================================================
--- linux-2.6.20-rc6.orig/arch/arm/kernel/process.c
+++ linux-2.6.20-rc6/arch/arm/kernel/process.c
@@ -28,6 +28,7 @@
 #include <linux/cpu.h>
 #include <linux/elfcore.h>
 #include <linux/pm.h>
+#include <linux/tick.h>
 
 #include <asm/leds.h>
 #include <asm/processor.h>
@@ -154,11 +155,11 @@ void cpu_idle(void)
 		if (!idle)
 			idle = default_idle;
 		leds_event(led_idle_start);
-		hrtimer_stop_sched_tick();
+		tick_nohz_stop_sched_tick();
 		while (!need_resched() && !need_resched_delayed())
 			idle();
 		leds_event(led_idle_end);
-		hrtimer_restart_sched_tick();
+		tick_nohz_restart_sched_tick();
 		local_irq_disable();
 		__preempt_enable_no_resched();
 		__schedule();

================================================================================
================================================================================

Updated version of i.MX patch follows. If somebody wants it,
I can send patch to revert code of previous version from
full 2.6.20-rc6-rt2 patch.

Ingo, please, can you replace i.MX1 patch in your series?

Thanks

          Pavel

================================================================================
================================================================================
Subject: arm: i.MX/MX1 clock event source

Support clock event source based on i.MX general purpose
timer in free running timer mode.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>

 arch/arm/mach-imx/time.c |  130 +++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 125 insertions(+), 5 deletions(-)

Index: linux-2.6.20-rc6/arch/arm/mach-imx/time.c
===================================================================
--- linux-2.6.20-rc6.orig/arch/arm/mach-imx/time.c
+++ linux-2.6.20-rc6/arch/arm/mach-imx/time.c
@@ -15,6 +15,9 @@
 #include <linux/irq.h>
 #include <linux/time.h>
 #include <linux/clocksource.h>
+#ifdef CONFIG_GENERIC_CLOCKEVENTS
+#include <linux/clockchips.h>
+#endif
 
 #include <asm/hardware.h>
 #include <asm/io.h>
@@ -25,6 +28,11 @@
 /* Use timer 1 as system timer */
 #define TIMER_BASE IMX_TIM1_BASE
 
+#ifdef CONFIG_GENERIC_CLOCKEVENTS
+static struct clock_event_device clockevent_imx;
+static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_PERIODIC;
+#endif
+
 static unsigned long evt_diff;
 
 /*
@@ -33,6 +41,7 @@ static unsigned long evt_diff;
 static irqreturn_t
 imx_timer_interrupt(int irq, void *dev_id)
 {
+	unsigned long tcmp;
 	uint32_t tstat;
 
 	/* clear the interrupt */
@@ -42,13 +51,20 @@ imx_timer_interrupt(int irq, void *dev_i
 	if (tstat & TSTAT_COMP) {
 		do {
 
+#ifdef CONFIG_GENERIC_CLOCKEVENTS
+			if (clockevent_imx.event_handler)
+				clockevent_imx.event_handler(&clockevent_imx);
+			if (likely(clockevent_mode != CLOCK_EVT_MODE_PERIODIC))
+				break;
+#else
 			write_seqlock(&xtime_lock);
 			timer_tick();
 			write_sequnlock(&xtime_lock);
-			IMX_TCMP(TIMER_BASE) += evt_diff;
+#endif
+			tcmp = IMX_TCMP(TIMER_BASE) + evt_diff;
+			IMX_TCMP(TIMER_BASE) = tcmp;
 
-		} while (unlikely((int32_t)(IMX_TCMP(TIMER_BASE)
-					- IMX_TCN(TIMER_BASE)) < 0));
+		} while (unlikely((int32_t)(tcmp - IMX_TCN(TIMER_BASE)) < 0));
 	}
 
 	return IRQ_HANDLED;
@@ -70,7 +86,7 @@ static void __init imx_timer_hardware_in
 	 */
 	IMX_TCTL(TIMER_BASE) = 0;
 	IMX_TPRER(TIMER_BASE) = 0;
-	IMX_TCMP(TIMER_BASE) = LATCH - 1;
+	IMX_TCMP(TIMER_BASE) = IMX_TCN(TIMER_BASE) + LATCH;
 
 	IMX_TCTL(TIMER_BASE) = TCTL_FRR | TCTL_CLK_PCLK1 | TCTL_IRQEN | TCTL_TEN;
 	evt_diff = LATCH;
@@ -87,7 +103,7 @@ static struct clocksource clocksource_im
 	.read		= imx_get_cycles,
 	.mask		= 0xFFFFFFFF,
 	.shift 		= 20,
-	.is_continuous 	= 1,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
 static int __init imx_clocksource_init(void)
@@ -99,11 +115,115 @@ static int __init imx_clocksource_init(v
 	return 0;
 }
 
+#ifdef CONFIG_GENERIC_CLOCKEVENTS
+
+static int imx_set_next_event(unsigned long evt,
+				  struct clock_event_device *unused)
+{
+	unsigned long tcmp;
+	evt_diff = evt;
+
+	tcmp = IMX_TCN(TIMER_BASE) + evt;
+	IMX_TCMP(TIMER_BASE) = tcmp;
+
+	return unlikely((int32_t)(tcmp - IMX_TCN(TIMER_BASE)) < 0) ? -ETIME : 0;
+}
+
+#ifdef DEBUG
+static const char *clock_event_mode_label[]={
+	[CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC",
+	[CLOCK_EVT_MODE_ONESHOT]  = "CLOCK_EVT_MODE_ONESHOT",
+	[CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN",
+	[CLOCK_EVT_MODE_UNUSED]   = "CLOCK_EVT_MODE_UNUSED"
+};
+#endif /*DEBUG*/
+
+static void imx_set_mode(enum clock_event_mode mode, struct clock_event_device *evt)
+{
+	unsigned long flags;
+
+	/*
+	 * The timer interrupt generation is disabled at least
+	 * for enough time to call imx_set_next_event()
+	 */
+	local_irq_save(flags);
+	/* Disable interrupt in GPT module */
+	IMX_TCTL(TIMER_BASE) &= ~TCTL_IRQEN;
+	if ((mode != CLOCK_EVT_MODE_PERIODIC) || (mode != clockevent_mode)) {
+		/* Set event time into far-far future */
+		IMX_TCMP(TIMER_BASE) = IMX_TCN(TIMER_BASE) - 3;
+		/* Clear pending interrupt */
+		IMX_TSTAT(TIMER_BASE) &= ~TSTAT_COMP;
+	}
+
+#ifdef DEBUG
+	printk(KERN_INFO "imx_set_mode: changing mode from %s to %s\n",
+		clock_event_mode_label[clockevent_mode], clock_event_mode_label[mode]);
+#endif /*DEBUG*/
+
+	/* Remember timer mode */
+	clockevent_mode = mode;
+	local_irq_restore(flags);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		/* It seems, that periodic mode expects old ugly latch period */
+		evt_diff = LATCH;
+		IMX_TCMP(TIMER_BASE) = IMX_TCN(TIMER_BASE) + evt_diff;
+	case CLOCK_EVT_MODE_ONESHOT:
+		/*
+		 * Do not put overhead of interrupt enable/disable into
+		 * imx_set_next_event(), the core has about 4 minutes
+		 * to call imx_set_next_event() or shutdown clock after
+		 * mode switching
+		 */
+		local_irq_save(flags);
+		IMX_TCTL(TIMER_BASE) |= TCTL_IRQEN;
+		local_irq_restore(flags);
+		break;
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_UNUSED:
+		/* Left event sources disabled, no more interrupts appears */
+		break;
+	}
+}
+
+static struct clock_event_device clockevent_imx = {
+	.name		= "imx_timer1",
+	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.shift		= 32,
+	.set_mode	= imx_set_mode,
+	.set_next_event	= imx_set_next_event,
+	.rating		= 200,
+};
+
+static int __init imx_clockevent_init(void)
+{
+	clockevent_imx.mult = div_sc(imx_get_perclk1(), NSEC_PER_SEC,
+					clockevent_imx.shift);
+	clockevent_imx.max_delta_ns =
+		clockevent_delta2ns(0xfffffffe, &clockevent_imx);
+	clockevent_imx.min_delta_ns =
+		clockevent_delta2ns(0xf, &clockevent_imx);
+
+	clockevent_imx.cpumask = cpumask_of_cpu(0);
+
+	clockevents_register_device(&clockevent_imx);
+
+	return 0;
+}
+#endif
+
+
 static void __init imx_timer_init(void)
 {
 	imx_timer_hardware_init();
 	imx_clocksource_init();
 
+#ifdef CONFIG_GENERIC_CLOCKEVENTS
+	imx_clockevent_init();
+#endif
+
 	/*
 	 * Make irqs happen for the system timer
 	 */

      reply	other threads:[~2007-01-26 19:34 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-01-21  0:01 [PATCH query] " Pavel Pisa
2007-01-22 19:59 ` Ingo Molnar
2007-01-23  2:52   ` Pavel Pisa
2007-01-24  2:00     ` Pavel Pisa
2007-01-24 11:37       ` Thomas Gleixner
2007-01-26 19:34         ` Pavel Pisa [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200701262034.03554.pisa@cmp.felk.cvut.cz \
    --to=pisa@cmp.felk.cvut.cz \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@elte.hu \
    --cc=s.hauer@pengutronix.de \
    --cc=tglx@linutronix.de \
    --subject='Re: [PATCH updated] arm: i.MX/MX1 clock event source' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).