LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: "Ahmed S. Darwish" <darwish.07@gmail.com>
To: yi.zhu@intel.com, linville@tuxdriver.com
Cc: linux-kernel@vger.kernel.org, netdev@vger.kernel.org
Subject: [PATCH 2.6.20] ipw2100: Use ARRAY_SIZE macro when appropriate
Date: Mon, 5 Feb 2007 18:56:22 +0200	[thread overview]
Message-ID: <20070205165622.GF3896@Ahmed> (raw)
In-Reply-To: <20070205165429.GD3896@Ahmed>

Hi all,

A patch to use ARRAY_SIZE macro already defined in kernel.h.

Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
---
Patch is compile tested.

diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c
index b85857a..a9d944a 100644
--- a/drivers/net/wireless/ipw2100.c
+++ b/drivers/net/wireless/ipw2100.c
@@ -2888,7 +2888,7 @@ static int __ipw2100_tx_process(struct ipw2100_priv *priv)
 
 #ifdef CONFIG_IPW2100_DEBUG
 		if (packet->info.c_struct.cmd->host_command_reg <
-		    sizeof(command_types) / sizeof(*command_types))
+		    ARRAY_SIZE(command_types))
 			IPW_DEBUG_TX("Command '%s (%d)' processed: %d.\n",
 				     command_types[packet->info.c_struct.cmd->
 						   host_command_reg],
@@ -3736,7 +3736,7 @@ static ssize_t show_registers(struct device *d, struct device_attribute *attr,
 
 	out += sprintf(out, "%30s [Address ] : Hex\n", "Register");
 
-	for (i = 0; i < (sizeof(hw_data) / sizeof(*hw_data)); i++) {
+	for (i = 0; i < ARRAY_SIZE(hw_data); i++) {
 		read_register(dev, hw_data[i].addr, &val);
 		out += sprintf(out, "%30s [%08X] : %08X\n",
 			       hw_data[i].name, hw_data[i].addr, val);
@@ -3757,7 +3757,7 @@ static ssize_t show_hardware(struct device *d, struct device_attribute *attr,
 
 	out += sprintf(out, "%30s [Address ] : Hex\n", "NIC entry");
 
-	for (i = 0; i < (sizeof(nic_data) / sizeof(*nic_data)); i++) {
+	for (i = 0; i < ARRAY_SIZE(nic_data); i++) {
 		u8 tmp8;
 		u16 tmp16;
 		u32 tmp32;
@@ -3894,13 +3894,11 @@ static ssize_t show_ordinals(struct device *d, struct device_attribute *attr,
 	if (priv->status & STATUS_RF_KILL_MASK)
 		return 0;
 
-	if (loop >= sizeof(ord_data) / sizeof(*ord_data))
+	if (loop >= ARRAY_SIZE(ord_data))
 		loop = 0;
 
 	/* sysfs provides us PAGE_SIZE buffer */
-	while (len < PAGE_SIZE - 128 &&
-	       loop < (sizeof(ord_data) / sizeof(*ord_data))) {
-
+	while (len < PAGE_SIZE - 128 && loop < ARRAY_SIZE(ord_data)) {
 		val_len = sizeof(u32);
 
 		if (ipw2100_get_ordinal(priv, ord_data[loop].index, &val,
@@ -6589,7 +6587,7 @@ static const long ipw2100_rates_11b[] = {
 	11000000
 };
 
-#define RATE_COUNT (sizeof(ipw2100_rates_11b) / sizeof(ipw2100_rates_11b[0]))
+#define RATE_COUNT ARRAY_SIZE(ipw2100_rates_11b)
 
 static int ipw2100_wx_get_name(struct net_device *dev,
 			       struct iw_request_info *info,


-- 
Ahmed S. Darwish
http://darwish-07.blogspot.com

  parent reply	other threads:[~2007-02-05 17:02 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-02-05 16:54 [PATCH 00] A series of patches to use ARRAY_SIZE in `net' drivers Ahmed S. Darwish
2007-02-05 16:55 ` [PATCH 2.6.20] e1000: Use ARRAY_SIZE macro when appropriate Ahmed S. Darwish
2007-02-06 17:16   ` Auke Kok
2007-02-05 16:56 ` Ahmed S. Darwish [this message]
2007-02-05 16:56 ` [PATCH 01/02] misc-net-drivers: " Ahmed S. Darwish
2007-02-05 16:57   ` [PATCH 02/02] " Ahmed S. Darwish
2007-02-05 16:58 ` [PATCH 2.6.20] misc-wireless: " Ahmed S. Darwish
2007-02-05 16:58 ` [PATCH 2.6.20] hostap: " Ahmed S. Darwish
2007-02-05 16:59 ` [PATCH 2.6.20] ibm_emac: " Ahmed S. Darwish
2007-02-05 20:22   ` Alexey Dobriyan
2007-02-06  9:12     ` Ahmed S. Darwish
2007-02-05 16:59 ` [PATCH 2.6.20] ixgb: " Ahmed S. Darwish
2007-02-05 20:18   ` Alexey Dobriyan
2007-02-05 20:31     ` Auke Kok
2007-02-06 10:00       ` Ahmed S. Darwish
2007-02-06 16:48         ` Auke Kok
2007-02-05 17:00 ` [PATCH 2.6.20] wavelan: " Ahmed S. Darwish
2007-02-05 20:17   ` Alexey Dobriyan
2007-02-06  9:34     ` Ahmed S. Darwish

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20070205165622.GF3896@Ahmed \
    --to=darwish.07@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linville@tuxdriver.com \
    --cc=netdev@vger.kernel.org \
    --cc=yi.zhu@intel.com \
    --subject='Re: [PATCH 2.6.20] ipw2100: Use ARRAY_SIZE macro when appropriate' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).