LKML Archive on lore.kernel.org help / color / mirror / Atom feed
From: Zachary Amsden <zach@vmware.com> To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>, Andrew Morton <akpm@osdl.org>, Andi Kleen <ak@muc.de>, Rusty Russell <rusty@rustcorp.com.au>, Jeremy Fitzhardinge <jeremy@goop.org>, Chris Wright <chrisw@sous-sol.org>, Zachary Amsden <zach@vmware.com> Subject: [PATCH 2/11] Sched clock paravirt op Date: Mon, 5 Feb 2007 19:52:40 -0800 [thread overview] Message-ID: <200702060352.l163qeAf000727@zach-dev.vmware.com> (raw) diff -r 3e746c0ebcdf arch/i386/kernel/paravirt.c --- a/arch/i386/kernel/paravirt.c Fri Feb 02 13:54:53 2007 -0800 +++ b/arch/i386/kernel/paravirt.c Fri Feb 02 15:27:50 2007 -0800 @@ -32,6 +32,7 @@ #include <asm/fixmap.h> #include <asm/apic.h> #include <asm/tlbflush.h> +#include <asm/timer.h> /* nop stub */ static void native_nop(void) @@ -523,6 +524,8 @@ struct paravirt_ops paravirt_ops = { .write_msr = native_write_msr, .read_tsc = native_read_tsc, .read_pmc = native_read_pmc, + .get_scheduled_cycles = native_read_tsc, + .get_cpu_khz = native_calculate_cpu_khz, .load_tr_desc = native_load_tr_desc, .set_ldt = native_set_ldt, .load_gdt = native_load_gdt, diff -r 3e746c0ebcdf arch/i386/kernel/tsc.c --- a/arch/i386/kernel/tsc.c Fri Feb 02 13:54:53 2007 -0800 +++ b/arch/i386/kernel/tsc.c Fri Feb 02 13:54:53 2007 -0800 @@ -14,6 +14,7 @@ #include <asm/delay.h> #include <asm/tsc.h> #include <asm/io.h> +#include <asm/timer.h> #include "mach_timer.h" @@ -102,9 +103,6 @@ unsigned long long sched_clock(void) { unsigned long long this_offset; - if (unlikely(custom_sched_clock)) - return (*custom_sched_clock)(); - /* * Fall back to jiffies if there's no TSC available: */ @@ -113,13 +111,13 @@ unsigned long long sched_clock(void) return (jiffies_64 - INITIAL_JIFFIES) * (1000000000 / HZ); /* read the Time Stamp Counter: */ - rdtscll(this_offset); + get_scheduled_cycles(this_offset); /* return the value in ns */ return cycles_2_ns(this_offset); } -static unsigned long calculate_cpu_khz(void) +unsigned long native_calculate_cpu_khz(void) { unsigned long long start, end; unsigned long count; diff -r 3e746c0ebcdf arch/i386/kernel/vmi.c --- a/arch/i386/kernel/vmi.c Fri Feb 02 13:54:53 2007 -0800 +++ b/arch/i386/kernel/vmi.c Fri Feb 02 15:32:20 2007 -0800 @@ -880,7 +880,7 @@ static int __init activate_vmi(void) paravirt_ops.setup_boot_clock = vmi_timer_setup_boot_alarm; paravirt_ops.setup_secondary_clock = vmi_timer_setup_secondary_alarm; #endif - custom_sched_clock = vmi_sched_clock; + paravirt_ops.get_scheduled_cycles = vmi_get_sched_cycles; } /* diff -r 3e746c0ebcdf include/asm-i386/paravirt.h --- a/include/asm-i386/paravirt.h Fri Feb 02 13:54:53 2007 -0800 +++ b/include/asm-i386/paravirt.h Fri Feb 02 15:27:50 2007 -0800 @@ -94,6 +94,8 @@ struct paravirt_ops u64 (fastcall *read_tsc)(void); u64 (fastcall *read_pmc)(void); + u64 (*get_scheduled_cycles)(void); + unsigned long (*get_cpu_khz)(void); void (fastcall *load_tr_desc)(void); void (fastcall *load_gdt)(const struct Xgt_desc_struct *); @@ -273,6 +275,9 @@ static inline void halt(void) #define rdtscll(val) (val = paravirt_ops.read_tsc()) +#define get_scheduled_cycles(val) (val = paravirt_ops.get_scheduled_cycles()) +#define calculate_cpu_khz() (paravirt_ops.get_cpu_khz()) + #define write_tsc(val1,val2) wrmsr(0x10, val1, val2) #define rdpmc(counter,low,high) do { \ diff -r 3e746c0ebcdf include/asm-i386/time.h --- a/include/asm-i386/time.h Fri Feb 02 13:54:53 2007 -0800 +++ b/include/asm-i386/time.h Fri Feb 02 15:27:50 2007 -0800 @@ -30,7 +30,6 @@ static inline int native_set_wallclock(u #ifdef CONFIG_PARAVIRT #include <asm/paravirt.h> -extern unsigned long long native_sched_clock(void); #else /* !CONFIG_PARAVIRT */ #define get_wallclock() native_get_wallclock() diff -r 3e746c0ebcdf include/asm-i386/timer.h --- a/include/asm-i386/timer.h Fri Feb 02 13:54:53 2007 -0800 +++ b/include/asm-i386/timer.h Fri Feb 02 13:54:53 2007 -0800 @@ -4,13 +4,21 @@ #include <linux/pm.h> #define TICK_SIZE (tick_nsec / 1000) + void setup_pit_timer(void); +unsigned long long native_sched_clock(void); +unsigned long native_calculate_cpu_khz(void); + /* Modifiers for buggy PIT handling */ extern int pit_latch_buggy; extern int timer_ack; extern int no_timer_check; -extern unsigned long long (*custom_sched_clock)(void); extern int no_sync_cmos_clock; extern int recalibrate_cpu_khz(void); +#ifndef CONFIG_PARAVIRT +#define get_scheduled_cycles(val) rdtscll(val) +#define calculate_cpu_khz() native_calculate_cpu_khz() #endif + +#endif diff -r 3e746c0ebcdf arch/i386/kernel/vmitime.c --- a/arch/i386/kernel/vmitime.c Fri Feb 02 13:54:53 2007 -0800 +++ b/arch/i386/kernel/vmitime.c Fri Feb 02 15:31:35 2007 -0800 @@ -170,7 +170,7 @@ int vmi_set_wallclock(unsigned long now) return -1; } -unsigned long long vmi_sched_clock(void) +unsigned long long vmi_get_sched_cycles(void) { return read_available_cycles(); } diff -r 3e746c0ebcdf include/asm-i386/vmi_time.h --- a/include/asm-i386/vmi_time.h Fri Feb 02 13:54:53 2007 -0800 +++ b/include/asm-i386/vmi_time.h Fri Feb 02 15:31:53 2007 -0800 @@ -49,7 +49,7 @@ extern void __init vmi_time_init(void); extern void __init vmi_time_init(void); extern unsigned long vmi_get_wallclock(void); extern int vmi_set_wallclock(unsigned long now); -extern unsigned long long vmi_sched_clock(void); +extern unsigned long long vmi_get_sched_cycles(void); #ifdef CONFIG_X86_LOCAL_APIC extern void __init vmi_timer_setup_boot_alarm(void);
next reply other threads:[~2007-02-06 3:52 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2007-02-06 3:52 Zachary Amsden [this message] 2007-02-06 4:00 ` [PATCH 2/11] Sched clock paravirt op Zachary Amsden 2007-02-06 12:32 ` Andi Kleen 2007-02-06 22:47 ` Zachary Amsden 2007-02-06 23:23 ` Jeremy Fitzhardinge 2007-02-06 23:42 ` Zachary Amsden 2007-02-06 23:48 ` Jeremy Fitzhardinge 2007-02-06 23:50 ` Zachary Amsden
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=200702060352.l163qeAf000727@zach-dev.vmware.com \ --to=zach@vmware.com \ --cc=ak@muc.de \ --cc=akpm@osdl.org \ --cc=chrisw@sous-sol.org \ --cc=jeremy@goop.org \ --cc=linux-kernel@vger.kernel.org \ --cc=rusty@rustcorp.com.au \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).