LKML Archive on lore.kernel.org
 help / color / Atom feed
From: "Ahmed S. Darwish" <darwish.07@gmail.com>
To: v4l-dvb-maintainer@linuxtv.org
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH 2.6.20] DVB: Use ARRAY_SIZE macro when appropriate
Date: Tue, 6 Feb 2007 18:03:23 +0200
Message-ID: <20070206160323.GB8991@Ahmed> (raw)
In-Reply-To: <20070206160204.GA8991@Ahmed>

Hi all,

A patch to use ARRAY_SIZE macro already defined in kernel.h

Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
---
Patch is compile-tested.

diff --git a/drivers/media/dvb/bt8xx/dst.c b/drivers/media/dvb/bt8xx/dst.c
index 9f72b70..0393a3d 100644
--- a/drivers/media/dvb/bt8xx/dst.c
+++ b/drivers/media/dvb/bt8xx/dst.c
@@ -1161,7 +1161,7 @@ static int dst_get_device_id(struct dst_state *state)
 		}
 	}
 
-	if (i >= sizeof (dst_tlist) / sizeof (dst_tlist [0])) {
+	if (i >= ARRAY_SIZE(dst_tlist)) {
 		dprintk(verbose, DST_ERROR, 1, "Unable to recognize %s or %s", &state->rxbuffer[0], &state->rxbuffer[1]);
 		dprintk(verbose, DST_ERROR, 1, "please email linux-dvb@linuxtv.org with this type in");
 		use_dst_type = DST_TYPE_IS_SAT;
diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.c b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
index 3e35931..5185a3c 100644
--- a/drivers/media/dvb/bt8xx/dvb-bt8xx.c
+++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
@@ -23,6 +23,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/init.h>
+#include <linux/kernel.h>
 #include <linux/device.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
@@ -213,7 +214,7 @@ static int cx24108_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend
 		freq = 2150000; /* satellite IF is 950..2150MHz */
 
 	/* decide which VCO to use for the input frequency */
-	for(i=1;(i<sizeof(osci)/sizeof(osci[0]))&&(osci[i]<freq);i++);
+	for(i=1;(i<ARRAY_SIZE(osci))&&(osci[i]<freq);i++);
 	printk("cx24108 debug: select vco #%d (f=%d)\n",i,freq);
 	band=bandsel[i];
 	/* the gain values must be set by SetSymbolrate */
diff --git a/drivers/media/dvb/frontends/cx24110.c b/drivers/media/dvb/frontends/cx24110.c
index ae96395..96ae6b1 100644
--- a/drivers/media/dvb/frontends/cx24110.c
+++ b/drivers/media/dvb/frontends/cx24110.c
@@ -254,7 +254,7 @@ static int cx24110_set_symbolrate (struct cx24110_state* state, u32 srate)
 	if (srate<500000)
 		srate=500000;
 
-	for(i=0;(i<sizeof(bands)/sizeof(bands[0]))&&(srate>bands[i]);i++)
+	for(i=0;(i<ARRAY_SIZE(bands))&&(srate>bands[i]);i++)
 		;
 	/* first, check which sample rate is appropriate: 45, 60 80 or 90 MHz,
 	   and set the PLL accordingly (R07[1:0] Fclk, R06[7:4] PLLmult,
@@ -361,7 +361,7 @@ static int cx24110_initfe(struct dvb_frontend* fe)
 
 	dprintk("%s: init chip\n", __FUNCTION__);
 
-	for(i=0;i<sizeof(cx24110_regdata)/sizeof(cx24110_regdata[0]);i++) {
+	for(i=0;i<ARRAY_SIZE(cx24110_regdata);i++) {
 		cx24110_writereg(state, cx24110_regdata[i].reg, cx24110_regdata[i].data);
 	};
 
diff --git a/drivers/media/dvb/frontends/cx24123.c b/drivers/media/dvb/frontends/cx24123.c
index a356d28..732e94a 100644
--- a/drivers/media/dvb/frontends/cx24123.c
+++ b/drivers/media/dvb/frontends/cx24123.c
@@ -507,7 +507,7 @@ static int cx24123_pll_calculate(struct dvb_frontend* fe, struct dvb_frontend_pa
 	int i = 0;
 	int pump = 2;
 	int band = 0;
-	int num_bands = sizeof(cx24123_bandselect_vals) / sizeof(cx24123_bandselect_vals[0]);
+	int num_bands = ARRAY_SIZE(cx24123_bandselect_vals);
 
 	/* Defaults for low freq, low rate */
 	state->VCAarg = cx24123_AGC_vals[0].VCAprogdata;
@@ -516,7 +516,7 @@ static int cx24123_pll_calculate(struct dvb_frontend* fe, struct dvb_frontend_pa
 	vco_div = cx24123_bandselect_vals[0].VCOdivider;
 
 	/* For the given symbol rate, determine the VCA, VGA and FILTUNE programming bits */
-	for (i = 0; i < sizeof(cx24123_AGC_vals) / sizeof(cx24123_AGC_vals[0]); i++)
+	for (i = 0; i < ARRAY_SIZE(cx24123_AGC_vals); i++)
 	{
 		if ((cx24123_AGC_vals[i].symbolrate_low <= p->u.qpsk.symbol_rate) &&
 		    (cx24123_AGC_vals[i].symbolrate_high >= p->u.qpsk.symbol_rate) ) {
@@ -658,7 +658,7 @@ static int cx24123_initfe(struct dvb_frontend* fe)
 	dprintk("%s:  init frontend\n",__FUNCTION__);
 
 	/* Configure the demod to a good set of defaults */
-	for (i = 0; i < sizeof(cx24123_regdata) / sizeof(cx24123_regdata[0]); i++)
+	for (i = 0; i < ARRAY_SIZE(cx24123_regdata); i++)
 		cx24123_writereg(state, cx24123_regdata[i].reg, cx24123_regdata[i].data);
 
 	/* Set the LNB polarity */
diff --git a/drivers/media/dvb/ttpci/av7110_ir.c b/drivers/media/dvb/ttpci/av7110_ir.c
index e4544ea..c281d78 100644
--- a/drivers/media/dvb/ttpci/av7110_ir.c
+++ b/drivers/media/dvb/ttpci/av7110_ir.c
@@ -4,6 +4,7 @@
 #include <linux/moduleparam.h>
 #include <linux/input.h>
 #include <linux/proc_fs.h>
+#include <linux/kernel.h>
 #include <asm/bitops.h>
 
 #include "av7110.h"
@@ -217,7 +218,7 @@ int __devinit av7110_ir_init(struct av7110 *av7110)
 	static struct proc_dir_entry *e;
 	int err;
 
-	if (av_cnt >= sizeof av_list/sizeof av_list[0])
+	if (av_cnt >= ARRAY_SIZE(av_list))
 		return -ENOSPC;
 
 	av7110_setup_irc_config(av7110, 0x0001);

-- 
Ahmed S. Darwish
http://darwish-07.blogspot.com

  reply index

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-02-06 16:02 [PATCH 00] A series of patches to use ARRAY_SIZE macro Ahmed S. Darwish
2007-02-06 16:03 ` Ahmed S. Darwish [this message]
2007-02-06 16:03 ` [PATCH 2.6.20] KVM: Use ARRAY_SIZE macro when appropriate Ahmed S. Darwish
2007-02-06 16:56   ` Dor Laor
2007-02-06 16:04 ` [PATCH 2.6.20] isdn-eicon: " Ahmed S. Darwish
2007-02-06 16:04 ` [PATCH 2.6.20] isdn-capi: " Ahmed S. Darwish
2007-02-06 17:52   ` Joe Perches
2007-02-06 20:41     ` Ahmed S. Darwish
2007-02-06 21:18       ` Philippe De Muyter
2007-02-07 19:41         ` Ahmed S. Darwish
2007-02-07 21:02           ` Philippe De Muyter
2007-02-08 15:53         ` Bill Davidsen
2007-02-08 16:02           ` Kai Germaschewski
2007-02-06 16:05 ` [PATCH 2.6.20 1/2] OSS: " Ahmed S. Darwish
2007-02-06 16:05 ` [PATCH 2.6.20 2/2] " Ahmed S. Darwish
2007-02-06 16:06 ` [PATCH 2.6.20] atm: " Ahmed S. Darwish
2007-02-06 16:06 ` [PATCH 2.6.20] drivers/md.c: " Ahmed S. Darwish
2007-02-06 16:07 ` [PATCH 2.6.20] infinband: " Ahmed S. Darwish
2007-02-06 18:57   ` Roland Dreier
2007-02-06 16:07 ` [PATCH 2.6.20] s390-drivers: " Ahmed S. Darwish
2007-02-07  6:32   ` Cornelia Huck
2007-02-06 16:08 ` [PATCH 2.6.20] rcutorture: " Ahmed S. Darwish
2007-02-07 18:29   ` Josh Triplett
2007-02-06 16:08 ` [PATCH 2.6.20] intel-agp: " Ahmed S. Darwish
2007-02-06 16:08 ` [PATCH 2.6.20] reiserfs: " Ahmed S. Darwish
2007-02-06 16:09 ` [PATCH 2.6.20] toshiba-acpi: " Ahmed S. Darwish
2007-02-06 16:09 ` [PATCH 2.6.20] w1: " Ahmed S. Darwish
2007-02-06 16:19   ` Evgeniy Polyakov
2007-02-06 16:10 ` [PATCH 2.6.20] drm: " Ahmed S. Darwish

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20070206160323.GB8991@Ahmed \
    --to=darwish.07@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=v4l-dvb-maintainer@linuxtv.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lkml.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lkml.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lkml.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lkml.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lkml.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lkml.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lkml.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lkml.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lkml.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lkml.kernel.org/lkml/9 lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lkml.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git