LKML Archive on lore.kernel.org
 help / color / Atom feed
From: "Ahmed S. Darwish" <darwish.07@gmail.com>
To: chas@cmf.nrl.navy.mil
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH 2.6.20] atm: Use ARRAY_SIZE macro when appropriate
Date: Tue, 6 Feb 2007 18:06:08 +0200
Message-ID: <20070206160608.GH8991@Ahmed> (raw)
In-Reply-To: <20070206160204.GA8991@Ahmed>

Hi all,

A patch to use ARRAY_SIZE macro already defined in kernel.h for ATM
drivers.

Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
---
diff --git a/drivers/atm/he.c b/drivers/atm/he.c
index db33f6f..8510026 100644
--- a/drivers/atm/he.c
+++ b/drivers/atm/he.c
@@ -3017,7 +3017,7 @@ read_prom_byte(struct he_dev *he_dev, int addr)
 	he_writel(he_dev, val, HOST_CNTL);
        
 	/* Send READ instruction */
-	for (i = 0; i < sizeof(readtab)/sizeof(readtab[0]); i++) {
+	for (i = 0; i < ARRAY_SIZE(readtab); i++) {
 		he_writel(he_dev, val | readtab[i], HOST_CNTL);
 		udelay(EEPROM_DELAY);
 	}
diff --git a/drivers/atm/idt77252.c b/drivers/atm/idt77252.c
index f407861..b4b8014 100644
--- a/drivers/atm/idt77252.c
+++ b/drivers/atm/idt77252.c
@@ -388,7 +388,7 @@ idt77252_eeprom_read_status(struct idt77252_dev *card)
 
 	gp = idt77252_read_gp(card) & ~(SAR_GP_EESCLK|SAR_GP_EECS|SAR_GP_EEDO);
 
-	for (i = 0; i < sizeof(rdsrtab)/sizeof(rdsrtab[0]); i++) {
+	for (i = 0; i < ARRAY_SIZE(rdsrtab); i++) {
 		idt77252_write_gp(card, gp | rdsrtab[i]);
 		udelay(5);
 	}
@@ -422,7 +422,7 @@ idt77252_eeprom_read_byte(struct idt77252_dev *card, u8 offset)
 
 	gp = idt77252_read_gp(card) & ~(SAR_GP_EESCLK|SAR_GP_EECS|SAR_GP_EEDO);
 
-	for (i = 0; i < sizeof(rdtab)/sizeof(rdtab[0]); i++) {
+	for (i = 0; i < ARRAY_SIZE(rdtab); i++) {
 		idt77252_write_gp(card, gp | rdtab[i]);
 		udelay(5);
 	}
@@ -469,14 +469,14 @@ idt77252_eeprom_write_byte(struct idt77252_dev *card, u8 offset, u8 data)
 
 	gp = idt77252_read_gp(card) & ~(SAR_GP_EESCLK|SAR_GP_EECS|SAR_GP_EEDO);
 
-	for (i = 0; i < sizeof(wrentab)/sizeof(wrentab[0]); i++) {
+	for (i = 0; i < ARRAY_SIZE(wrentab); i++) {
 		idt77252_write_gp(card, gp | wrentab[i]);
 		udelay(5);
 	}
 	idt77252_write_gp(card, gp | SAR_GP_EECS);
 	udelay(5);
 
-	for (i = 0; i < sizeof(wrtab)/sizeof(wrtab[0]); i++) {
+	for (i = 0; i < ARRAY_SIZE(wrtab); i++) {
 		idt77252_write_gp(card, gp | wrtab[i]);
 		udelay(5);
 	}
diff --git a/drivers/atm/nicstarmac.c b/drivers/atm/nicstarmac.c
index 2c5e3ae..480947f 100644
--- a/drivers/atm/nicstarmac.c
+++ b/drivers/atm/nicstarmac.c
@@ -7,6 +7,8 @@
  * Read this ForeRunner's MAC address from eprom/eeprom
  */
 
+#include <linux/kernel.h>
+
 typedef void __iomem *virt_addr_t;
 
 #define CYCLE_DELAY 5
@@ -176,7 +178,7 @@ read_eprom_byte(virt_addr_t base, u_int8_t offset)
    val = NICSTAR_REG_READ( base, NICSTAR_REG_GENERAL_PURPOSE ) & 0xFFFFFFF0;
 
    /* Send READ instruction */
-   for (i=0; i<sizeof readtab/sizeof readtab[0]; i++)
+   for (i=0; i<ARRAY_SIZE(readtab); i++)
    {
 	NICSTAR_REG_WRITE( base, NICSTAR_REG_GENERAL_PURPOSE,
 		(val | readtab[i]) );


-- 
Ahmed S. Darwish
http://darwish-07.blogspot.com

  parent reply index

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-02-06 16:02 [PATCH 00] A series of patches to use ARRAY_SIZE macro Ahmed S. Darwish
2007-02-06 16:03 ` [PATCH 2.6.20] DVB: Use ARRAY_SIZE macro when appropriate Ahmed S. Darwish
2007-02-06 16:03 ` [PATCH 2.6.20] KVM: " Ahmed S. Darwish
2007-02-06 16:56   ` Dor Laor
2007-02-06 16:04 ` [PATCH 2.6.20] isdn-eicon: " Ahmed S. Darwish
2007-02-06 16:04 ` [PATCH 2.6.20] isdn-capi: " Ahmed S. Darwish
2007-02-06 17:52   ` Joe Perches
2007-02-06 20:41     ` Ahmed S. Darwish
2007-02-06 21:18       ` Philippe De Muyter
2007-02-07 19:41         ` Ahmed S. Darwish
2007-02-07 21:02           ` Philippe De Muyter
2007-02-08 15:53         ` Bill Davidsen
2007-02-08 16:02           ` Kai Germaschewski
2007-02-06 16:05 ` [PATCH 2.6.20 1/2] OSS: " Ahmed S. Darwish
2007-02-06 16:05 ` [PATCH 2.6.20 2/2] " Ahmed S. Darwish
2007-02-06 16:06 ` Ahmed S. Darwish [this message]
2007-02-06 16:06 ` [PATCH 2.6.20] drivers/md.c: " Ahmed S. Darwish
2007-02-06 16:07 ` [PATCH 2.6.20] infinband: " Ahmed S. Darwish
2007-02-06 18:57   ` Roland Dreier
2007-02-06 16:07 ` [PATCH 2.6.20] s390-drivers: " Ahmed S. Darwish
2007-02-07  6:32   ` Cornelia Huck
2007-02-06 16:08 ` [PATCH 2.6.20] rcutorture: " Ahmed S. Darwish
2007-02-07 18:29   ` Josh Triplett
2007-02-06 16:08 ` [PATCH 2.6.20] intel-agp: " Ahmed S. Darwish
2007-02-06 16:08 ` [PATCH 2.6.20] reiserfs: " Ahmed S. Darwish
2007-02-06 16:09 ` [PATCH 2.6.20] toshiba-acpi: " Ahmed S. Darwish
2007-02-06 16:09 ` [PATCH 2.6.20] w1: " Ahmed S. Darwish
2007-02-06 16:19   ` Evgeniy Polyakov
2007-02-06 16:10 ` [PATCH 2.6.20] drm: " Ahmed S. Darwish

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20070206160608.GH8991@Ahmed \
    --to=darwish.07@gmail.com \
    --cc=chas@cmf.nrl.navy.mil \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lkml.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lkml.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lkml.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lkml.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lkml.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lkml.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lkml.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lkml.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lkml.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lkml.kernel.org/lkml/9 lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lkml.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git