On Wednesday 07 February 2007 06:59, you wrote:
> Marc Donner wrote:
> > 501:     215717     209388     209430     202514   PCI-MSI-edge     
> > eth10 502:        927       1019       1053        888   PCI-MSI-edge    
> >  eth11
>
> this is odd, this is not an irq distribution that irqbalance should
> give you

i think this is ok, because only eth10 is receiving packets. traffic is 
flowing from eth10 to eth11

> and this doesn't match the irq output...
> sounds as if something has a real bug; can you send an lsmod ? maybe
> some driver keeps doing si's

lsmod
Module                  Size  Used by
thermal                16780  0
fan                     6280  0
button                  9696  0
processor              29576  1 thermal
ac                      6664  0
battery                11720  0

drivers are build directly in the kernel. i have attached the config file.

i can also give access to the test setup, if you want.

i have also tested kernel 2.6.18.3 and 2.6.19.2 on other hardware. same 
effect. 

regards 
marc